Coiled Tubing Drop in Drum System (DID)
2
Coiled Tubing Drop in Drum System (DID) The Dwellop DID system exceeds other systems in performance, reliability, safety and capacity. – IOR Technology The Dwellop Drop In Drum system (DID) is designed to meet the Customer’s Operational Requirements for Safe and Efficient drum installation and replacement. With its compact design, the DID system can be installed at locations with limited deck space. The low weight of the DID allows for extensive lengths of Coiled Tubing enabling our customers to achieve their operational targets. This system – with it’s long and well proven track record – is the #1 choice by Customers worldwide offshore. Features: • Designed for Offshore lifting and handling, DNV 2.7-3 certified • Hydraulic operated folding for efficient rig-up / rig-down and transport • Compact design for road transport • Built in Inhibitor pumping system • CT swivel with high pressure manifold • Stainless steel hydraulic lines, cylinders and fittings available Benefits: • PowerStand fits multiple drum designs • Low maintenance and repair cost • Drum change done in less than 30 minutes • Drive system with hydraulic motors and brakes in case of motor failure • Low drum weight, enabling maximum tubing weight capacity • Powerstand drive unit lifted separately onto platform, thus enabling maximum lengths of coil on drums
Transcript of Coiled Tubing Drop in Drum System (DID)
Coiled Tubing Drop in Drum System (DID)
The Dwellop DID system exceeds other systems in performance, reliability, safety and capacity.
– IOR Technology
The Dwellop Drop In Drum system (DID) is designed to meet the Customer’s Operational Requirements for Safe and Efficient drum installation and replacement. With its compact design, the DID system can be installed at locations with limited deck space. The low weight of the DID allows for extensive lengths of Coiled Tubing enabling our customers to achieve their operational targets. This system – with it’s long and well proven track record – is the #1 choice by Customers worldwide offshore.
Features:
• Designed for Offshore lifting and handling, DNV 2.7-3 certified
• Hydraulic operated folding for efficient rig-up / rig-down and transport
• Compact design for road transport
• Built in Inhibitor pumping system
• CT swivel with high pressure manifold
• Stainless steel hydraulic lines, cylinders and fittings available
Benefits:
• PowerStand fits multiple drum designs
• Low maintenance and repair cost
• Drum change done in less than 30 minutes
• Drive system with hydraulic motors and brakes in case of motor failure
• Low drum weight, enabling maximum tubing weight capacity
• Powerstand drive unit lifted separately onto platform, thus enabling maximum lengths of coil on drums
Coiled Tubing Drop in Drum System (DID)
Powerstand and Drop In Drum being installed offshore
Dwellop ASOffice phone: +47 51 57 28 00E-mail: [email protected]
Technical data:
Maximum drum size OD 192” OD 232”
Tubing Size Up to 2 3/8” Up to 2 7/8”
Standard Spooling Head roller size *) 2 3/8” 2 7/8”
Max. Operational load (drum w/tubing) 80 MT (175.000lbs) 110 MT (240.000lbs)
Maximum Working Pressure 10.000/15000 PSI
Operating Temperature -200C/+500C
Weight without drum 12,5 MT 14,5 MT
Transport - Powerstand
Width 3029mm
Height 4260mm 4700mm
Length 5590mm *)
Transport - Drums **)
Width 2950mm
Height =OD+250mm
Length =OD
Operation, Powerstand with Max OD Drum
Width 5590mm *)
Height 5300mm 6300mm
Length 6600mm 7700mm
Suitable Drums (w/Transport Cradle)
Drum width (hub to hub) 96” / 2442mm
Without spacer frame OD 192”OD 180”
OD 232”OD 228”
With spacer frame OD 168” OD 192”OD 180”
*) Including side platforms (easily removable)
**) OD varies with the drums
