Cod Remoto Samsung

Owner’s Instructions

COLOR TELEVISION

TX-P3235/TX-P2734TX-P2730/TX-P2728

2

Important Warranty Information

Regarding Television Format

ViewingStandard screen format televisions (4:3, the aspect ratio of the screen width to height) areprimarily designed to view standard format full-motion video. The images displayed onthem should primarily be in the standard 4:3 ratio format and constantly moving.Displaying stationary graphics and images on screen, such as the dark top and bottomletterbox bars (wide screen pictures), should be limited to no more than 15% of the totaltelevision viewing per week.

Wide screen format televisions (16:9, the aspect ratio of the screen width to height) areprimarily designed to view wide screen format full-motion video. The images displayedon them should primarily be in the wide screen 16:9 ratio format, or expanded to fill thescreen if your model offers this feature, and constantly moving. Displaying stationarygraphics and images on screen, such as the dark side-bars on non-expanded standardformat television video and programming, should be limited to no more than 15% of thetotal television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports,video game displays, station logos, web sites or computer graphics and patterns, shouldbe limited as described above for all televisions. Displaying any stationary images thatexceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle,but permanent burned-in ghost images in the television picture. To avoid this, vary the pro-grammingand images, and primarily display full screen moving images, not stationary patterns ordark bars. On television models that offer picture sizing features, use these controls toview the different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. UnevenCRT aging as a result of format selection and use, as well as other burned-in images, isnot covered by your Samsung limited warranty.

CO N T E N T S

3

Chapter 1: Your New TV . . . . . . . . . . . . . . . . 5List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 2: Installation. . . . . . . . . . . . . . . . . 11Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 11

Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . 11Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 12Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . 12

Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 12Connecting to a Cable Box that Descrambles All Channels . . 13Connecting to a Cable Box that Descrambles Some Channels 13

Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . 16Connecting a Second VCR to Record from the TV. . . . . . . . . 17

Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 3: Operation . . . . . . . . . . . . . . . . . . 20Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . . . 22

Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 24Storing Channels in Memory (Automatic Method) . . . . . . . . 25Adding and Erasing Channels (Manual Method). . . . . . . . . . 26

Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 27Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 27Using the PRE-CH Button to select the Previous Channel . . . 27Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Labeling the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Using the Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Setting the Signal Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Assigning Names to External input mode . . . . . . . . . . . . . . . 38

CO N T E N T S

4

Chapter 4: Special Features. . . . . . . . . . . . . 39

Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Using the R.Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 44Extra sound settings (Auto Volume, Turbo Sound or Pseudo Stereo) . . 45Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Setting the Preferred Volume Level . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Using the V-Chip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Setting The On/Off Melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Viewing the Demonstration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Setting Up Your Remote Control to Operate Your VCR (Cable boxor DVD player) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chapter 5: Troubleshooting. . . . . . . . . . . . . 61Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

YO U R NE W TV

5

Chapter One

YO U R NE W TV

List of Features

Your TV was designed with the latest technology. This TV is a high-performance unit thatincludes the following special features:

• Full Flat Screen

• Easy-to-use remote control

• Easy-to-use on-screen menu system

• Automatic timer to turn the TV on and off

• Adjustable picture and sound settings that can be stored in the TV’s memory

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• A built-in multi-channel sound decoder for stereo and bilingual listening

• Built-in, dual channel speakers

• A special sleep timer

• V-Chip function

Accessories

Once you have unpacked your TV, check to make sure that you have all the parts shownhere. If any piece is missing or broken, call your dealer.

Remote Control(AA59-00325B)/AAA Batteries(4301-000121)

Owner’s Instructions/Safety Guide Manual

Warranty Card; 2EA/Registration Card

YO U R NE W TV

6

Familiarizing Yourself with The TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screenmenu. To use the more advanced features, you must use the remote control.

Œ MENUPress to see an on-screen menu of your TV's fea-tures.

´ VOL – and +Press to increase or decrease the volume.Also used to select items on the on-screen menu.

ˇ CH (�) and CH (�)Press to change channels. Also press to highlightvarious items on the on-screen menu.

¨ Remote Control SensorAim the remote control towards this spot on theTV.

ˆ TIMER indicatorWhen the TV is turned on, the TIMER indicatorblinks five times. This indicator illuminates whenthe TIMER mode is set to the “On” position aftersetting the clock and either the On timer or Offtimer, with the remote control. Even if the power isturned off, this indicator stays lit. (Clock must beset before using this function.)

Ø POWERPress to turn the TV on and off.

TX-P3235 TX-P2734

TX-P2730 TX-P2728

YO U R NE W TV

7

Side Panel Jacks

You can use the side panel jacks to connect an A/V component that is used only occa-sionally, such as a camcorder or video game. (For information on connecting equipment,see page 18.)

Œ AUDIO INPUT jacksUsed to connect the audio signals from a camcorderor video game.

´ VIDEO INPUT jackUsed to connect a video signal from a camcorder orvideo game.

ˇ SUPER VIDEO INPUT jackS-Video signal from an S-VHS VCR or DVD player.Note: In S-Video mode, Audio Output depends whatkind of audio input source is connected to the sideaudio input jacks (AV2).

¨HEADPHONEConnect a set of external headphones to this jack forprivate listening.

TX-P3235 TX-P2734 TX-P2730/TX-P2728

YO U R NE W TV

8

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)

For more information on connecting equipment, see pages 11 – 17.

Œ VIDEO INPUT jack Video signals from VCRs, DVD players and similardevices.

´ AUDIO INPUTS (INPUT1

and 2)/DVD AUDIO INPUTS(INPUT 2)

Audio signals from VCRs, DVD players and similardevices.Use these jacks to connect the audio signals from aDVD player when using the DVD video input jacks.When not using the DVD jacks, these audio jacksfunction as audio for Video 2 or S-VIDEO.

ˇ AUDIO-VIDEO MONITOROUTPUT jacks These audio-video signals are identical to A/Vsignals being displayed on the big screen. (Typicallyused as the input signals for a recording VCR.)

¨ SUPER VIDEO INPUT jackS-Video signal from an S-VHS VCR or DVD player.Note: In S-Video mode, Audio Output depends whatkind of audio input source is connected to the sideaudio input jacks (AV2).

ˆ COMPONENT VIDEO INPUTjacks Connect video from a DVD player.Note: Only black and white signals are output froma monitor in DVD mode.

Ø VHF/UHF Connect to an antenna or to a cable TV system.

YO U R NE W TV

9

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote,always point it directly at the TV.

You can also use your remote control to operate your Set-Top Box, VCR, DVD and cablebox. See page 60 for details.

Œ POWERTurns the TV on and off.

´ S.MODEAdjust the TV sound by selectingone of the preset factory settings(or select your personal, customizedsound settings).

ˇ P.MODEAdjust the TV picture by selectingone of the preset factory settings(or select your personal, customizedpicture settings).

¨ Number buttonsPress to select channels directly onthe TV.

+100Press to select channels over 100.For example, to select channel 121, press “+100,” thenpress “2” and “1.”

ˆ VOL -, VOL + Press to increase or decrease thevolume.

Ø MUTEPress to temporarily cut off the sound.

∏ SLEEPPress to select a preset time inter-val for automatic shutoff.

” MENUDisplays the main on-screen menu.

’ P.SIZEPress to change the screen size.Your choices are Normal, Zoom.

˝ R.SURFPress the R.SURF button to auto-matically return to a preferredchannel after a user-preset timedelay.

Ô MODESelects a target device to be con-trolled by the Samsung remote con-trol (i.e., TV, Set Top Box, VCR, Cablebox, or DVD).

PRE-CHTunes to the previous channel.

Ò TV/VIDEOPress to display all of the availablevideo sources (i.e., Antenna/Cable,VCR).

Ú CH and CH(Channel Up/Down)Press CH or CH to changechannels.

Æ INFOPress to see the time, channel, etc.,on-screen.

ı EXITPress to exit the menu.

˜ Up,Down,Left,Right (�,�,œ,√)/ENTERPress to select highlight up, down,left, or right. While using the on-screen menus, press ENTER to acti-vate (or change) a particular item.

¯ TURBOPress to turn the TURBO sound Onor Off.

˘ MTS (MultichannelTelevision Stereo)Press to choose stereo, mono orSeparate Audio Program (SAPbroadcast).

YO U R NE W TV

10

Remote Control

¿ CH. SCANNot available.

¸ VCR(DVD, DVR orSTB) Controls

REW (Rewind)Press to rewind a tape in yourVCR(DVD, DVR or STB).

STOPPress this button to stop a tapeduring play, record, rewind orfast forward. If the button ispressed during Full-Automaticplay, the function will be can-celled.

PLAY/PAUSEPress the PLAY/PAUSE button toplay back prerecorded tapes orpause the tape.

FFPress to fast forward the tape inyour VCR(DVD, DVR or STB).

˛ SETUse this button when you are set-ting up your remote control to oper-ate your Set Top Box, VCR, Cablebox or DVD.

◊ PIP Controls Not available.

± RESETIf your remote control is not func-tioning properly, take out the batter-ies and press the reset button forabout 2~3 seconds. Re-insert thebatteries and try using the remotecontrol again.

IN S TA L L AT I O N

11

Chapter Two


Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on next page.

If you have two antennas, see “Separate VHF and UHF Antennas” on next page.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.

1Place the wires from thetwin leads under thescrews on the 300-75 ohmadaptor (not supplied). Usea screwdriver to tightenthe screws.

2Plug the adaptor into theVHF/UHF terminal on thebottom of the back panel.


12

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

�

1Plug the incoming cableinto the VHF/UHF antennaterminal on back of the TV.

Because this TV is cable-ready,you do not need a cable box to viewunscrambled cable channels.

2Plug the combiner into theVHF/UHF terminal on thebottom of the rear panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1Connect both antennaleads to the combiner.

Antennas with 75-ohm Round Leads

1Plug the antenna lead intothe VHF/UHF terminal onthe bottom of the backpanel.


13

Connecting to a Cable Box that Descrambles All Channels

�

1Find the cable that is con-nected to the ANTENNAOUT terminal on your cablebox.

This terminal might be labeled“ANT OUT”, “VHF OUT” or simply,“OUT”.

2Connect the other end ofthis cable to the VHF/UHFantenna terminal on theback of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow theinstructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths ofcoaxial cable. (These items are available at most electronics stores.)

�

1Find and disconnect thecable that is connected tothe ANTENNA IN terminal on your cable box.

This terminal might be labeled“ANT IN”, “VHF IN” or simply,“IN”.

2Connect this cable to atwo-way splitter.

3Connect a coaxial cablebetween an OUTPUT termi-nal on the splitter and theIN terminal on the cablebox.

Incoming Cable

Splitter

Incoming Cable

Cable Box

Splitter


14

4Connect a coaxial cablebetween the ANTENNAOUT terminal on the cablebox and the B–IN terminalon the RF(A/B) switch.

5Connect another cablebetween the other OUT ter-minal on the splitter andthe A–IN terminal on theRF (A/B) switch.

6Connect the last coaxialcable between the OUTterminal on the RF (A/B)switch and the VHF/UHFterminal on the rear of theTV.

After you’ve made this connection, set the A/B switch to the “A” position for normal view-ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set theA/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which isusually channel 3 or 4.)

IncomingCable

Cable Box

RF (A/B)Switch

Splitter

IncomingCable

Cable Box

RF (A/B)Switch

Splitter

IncomingCable

Cable BoxRF (A/B)Switch

TV RearSplitter


15

3Connect a coaxial cablebetween the ANTENNAOUT terminal on the VCRand the antenna terminal on the TV.

4Connect a set of audiocables between theAUDIO OUT jacks on theVCR and the AUDIO jackson the TV.

5Connect a video cablebetween the VIDEO OUTjack on the VCR and theVIDEO jack on the TV.

Follow the instructions in “Viewing an External Signal Source” to view your VCR tape.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cableTV system (according to the instructions on pages 11-14). Skip step 1 if you have not yetconnected to an antenna or a cable system.

1Unplug the cable orantenna from the back ofthe TV.

2Connect the cable orantenna to the ANTENNA IN terminal onthe back of the VCR.

IncomingCable orAntenna

VCR Rear Panel

VCR Rear Panel

Coaxial Cable

TV Rear Panel

VCR Rear Panel

Audio Cable

TV Rear Panel

VCR Rear Panel

Video Cable

TV Rear Panel


16

3Connect an S-videocable between the S-VIDEO OUT jack on theVCR and the S-VIDEO INPUTjack on the TV.

An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

Make sure the jacks you are using are underneath the number “2.”

2Connect a set of audiocables between theAUDIO OUT jacks on theVCR and the 2 AUDIOINPUT jacks on the TV.

1To begin, follow steps 1–3 in the previous section to connect theantenna or cable to yourVCR and your TV.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

VCR Rear Panel

Coaxial Cable

TV Rear Panel

VCR Rear Panel

Audio Cable

TV Rear Panel

VCR Rear Panel

Video Cable

TV Rear Panel


17

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR.To do this, connect your second VCR as follows:

1Connect a set of audiocables between theAUDIO OUT jacks on theTV and the AUDIO INjacks on the VCR.

2Connect a video cablebetween the VIDEO OUTjack on the TV and theVIDEO IN jack on theVCR.

Refer to your VCR’s instructions for more information about how to record using this kindof connection.

(The VCR input jacks might be either on the front or on back of the VCR.)

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1Connect a set of audiocables between theAUDIO INPUT 2 jacks onthe TV and the AUDIOOUT jacks on the DVDplayer.

2Connect a video cablebetween the COMPO-NENT INPUT (Y, Pb, Pr)jacks on the TV and theCOMPONENT VIDEO OUT(Y, Pb, Pr) jacks on theDVD player.

VCR Input Panel

Audio Cable

TV Rear Panel

VCR Input Panel

Video Cable

TV Rear Panel

DVD Player Rear Panel

TV Rear Panel

Audio Cable

DVD Player Rear PanelTV Rear Panel

Video Cable

Note: For an explanation of Component video, see your DVD player's owner's manual.


18

2Connect an audio cablebetween the AUDIOOUTPUT jack on thecamcorder and theAUDIO terminals on theside of the TV.

3Connect a video cablebetween the VIDEO OUT-PUT jack on the cam-corder and the VIDEO ter-minal on the side of theTV.

1Locate the A/V outputjacks on the camcorder.They are usually found onthe side or back of thecamcorder.

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allowyou to view the camcorder tapes without using a VCR. (Also see “Viewing an External SignalSource” on page 37)

The audio-video cables shown here are usually included with a Camcorder. (If not, checkyour local electronics store.) If your camcorder is stereo, you need to connect a set of twocables.

Note: This figure shows the Standard connector-jack panel. The actual configuration foryour TV may be different.

CamcorderOutput Jacks


Audio Cable

Video Cable

Y-Connector

TV Side Panel


TV Side Panel


19

�

3Replace the cover.

Remove the batteries and storethem in a cool, dry place if you won’tbe using the remote control for along time.

The remote control can be used upto about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

�

2Install two AAA sizebatteries.

Make sure to match the “+” and“–” ends of the batteries with thediagram inside the compartment.

Installing Batteries in the Remote Control

1Slide the cover out com-pletely.

OP E R AT I O N

20

OP E R AT I O NChapter Three

OP E R AT I O N

1Press the POWER buttonon the remote control.

The message “Plug &Play” is displayed.It flickers for a little whileand then the “Language”menu is automatically dis-played.

Turning the TV On and Off

Press the POWER button on the remote control.You can also use the POWER button on the front panel.

Plug & Play Feature

When the TV is initially powered On, five basic customer settings proceed automaticallyand subsequently: Setting the language, Video signal source, Ant. input check, Auto program and Clock.

Plug & Play

3Press the MENU buttonthen the “Ant Input check”is automatically displayed.Make sure that the antennais connected to the TV.Press the ENTER buttonand then the “Channel”menu is automatically displayed.

2Press the œœ or √√ button toselect the desired language.

Adjust Skip

Setup

� MoreLanguage : EnglishBlue Screen : On √√

Melody : On √√

Demonstration √√

Ant Input check

Auto Program Skip

4Press the œœ or √√ button toselect signal source (Air,STD, HRC, IRC).

Adjust Skip

Channel

Auto Program √√

Add/Delete : Deleted √√

Air/CATV : AirName : ----

OP E R AT I O N

21

7Press the ENTER button and then press the œœ or √√button to move the hour orminute. Set the hour orminute by pressing the � or� button. (refer to “Settingthe Clock” on page 30.)

8When you have finished,press the MENU button.The message “Enjoy yourwatching..” is displayed.

9If you want to reset thisfeature(1)Press the MENU button.(2)Press the � or � but-

ton to select the “Setup”,then press the ENTERbutton.

(3)Press the � or � but-ton to select “Plug &Play”, then press theENTER button.The message “Plug &Play” is displayed.

Note: Plug & Play feature doesn’t work when in the AV mode.

Enjoy your watching..

Move Enter Return

Time

Clock - - : - - amOn Timer - - : - - am OffOff Timer - - : - - am OffSleep Timer : OffOn Timer Volume : 10

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

6Press the ENTER button tostart “Auto Program” orpress the MENU button toreturn. (refer to “Auto pro-gram” on page 25.) The TVwill begin memorizing all ofthe available channels.

Auto Program

Air 7

Enter Skip

Stop

5Press the MENU button andthen the “Auto Program” isautomatically displayed.

Auto Program

Air 3

Enter Skip

Start

OP E R AT I O N

22

Viewing the Display

The display identifies the current channel and the statusof certain audio-video settings.

�

The on-screen displays disappear after ten seconds.

Viewing the Menus and On-Screen Displays

Viewing the Menus

�

1With the power on, pressthe MENU button.

The main menu appears onthe screen. Its left side hasfive icons: Input, Picture,Sound, Channel and Setup.

The on-screen menus disappearfrom the screen after two minutes.

�

You can also use the MENU, CHand VOL buttons on the controlpanel of the TV to make selections.

1Press the INFO button.

The on-screen displayshows any or all of the fol-lowing: Active channel,the channel label, signal,picture mode, sound mode,MTS and the current time.

2Use the � and � buttons to highlight one of the 5 icons.Then press the ENTER button to access the icon’s sub-menu.

3Press the EXIT button to exit.

Move Enter Exit

Source List : TV √√

Edit Name √√

Input

Air 10Signal : Mono

Picture : DynamicSound : CustomMTS : Stereo12 : 00 am

OP E R AT I O N

23

Selecting a Menu Language

1Press the MENU button todisplay the menu.

Press the � or � buttonto select “Setup”, thenpress the ENTER button.

3Press the œœ or √√ buttonto select the appropriate language: “English”,“Español” or “Français”.

Press the EXIT button toexit.

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

2Press the � or � buttonto select “Language”, thenpress the ENTER button.

Move Adjust Return

Setup


Melody : On √√


Mover Ajustar Regresar

Configuración

� MásIdioma : EspañolPantalla Azul : Enc. √√

Melodía : Enc. √√

Demostración √√

OP E R AT I O N

24

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna)and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change chan-nels by entering the channel digits. There are three steps for memorizing channels:selecting a broadcast source, memorizing the channels (automatic) and adding and delet-ing channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify thetype of signal source that is connected to the TV (i.e., an antenna or a cable system).

1Press the MENU button to display the menu.

Press the � or � button toselect “Channel”, then pressthe ENTER button

2Press the � or � buttonto select “Air/CATV”, thenpress the ENTER button

Note: STD, HRC and IRC identify various types of cableTV systems. Contact your local cable company to identifythe type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceedto “Storing Channels in Memory” (next page).

Move Enter Return

Channel

Auto Program √√



Move Adjust Return

Channel

Auto Program √√



3Repeatedly press the œœ or √√ button to cyclethrough these choices:“Air” (antenna) “STD”,“HRC” or “IRC” (all cableTV)


Move Adjust Return

Channel

Auto Program √√


Air/CATV : STDName : ----

OP E R AT I O N

25

3Press the ENTER button to start "Auto Program".The TV will begin memoriz-ing all of the availablechannels.

After all the available chan-nels are stored, theChannel menu reappears.Press the MENU button toskip and press the ENTERbutton to stop.

Storing Channels in Memory (Automatic Method)

�

The TV automatically cyclesthrough all of the available channelsand stores them in memory. This takes about one to two minutes.

2Press the � or � buttonto select “Auto Program”and then press the ENTERbutton.The “Auto Program” is automatically displayed.

1First, select the correct sig-nal source (Air, STD, HRC,IRC). See steps 1~3 on pre-vious page.

Move Adjust Return

Channel

Auto Program √√



Move Enter Return

Channel

Auto Program √√



Auto Program

Air 3

Enter Return

Start

Auto Program

Air 5

Enter Return

Stop

OP E R AT I O N

26

Adding and Erasing Channels (Manual Method)

First, press the CH or CH button or the number buttonsto select the channel you want to add or delete.


Press the � or � buttonto select “Channel”, thenpress the ENTER button.

2Press the � or � buttonto select “Add/Delete”,then press the ENTERbutton.

3Press the � or � buttonto select “Added” or“Deleted” then press theENTER button.


Move Enter Return

Channel

Auto Program √√



Move Enter Return

Channel

Auto Program √√

Add/Delete : DeletedAir/CATV : AirName : ----

DeletedAdded

Move Enter Return

Channel

Auto Program √√



OP E R AT I O N

27

Changing Channels

Using the Channel Buttons

1Press the CH or CH button to change channels.

When you press CH or CH , the TV changes channels in sequence. You will see all thechannels that the TV has memorized. (The TV must have memorized at least three channels.)You will not see channels that were either erased or not memorized.

Directly Accessing Channels

Use the number buttons to quickly tune to any channel.

1Press the number buttons to go directly to a channel. For example,to select channel 27, press “2” then “7”. The TV will change channelswhen you press the second number.

When you use the number buttons, you can directly select channels that were either erasedor not memorized.

To select a channel over 100, press the +100 button. (For channel 122, press “+100” then “2”then “2”.)

To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel “4” press “0” then “4”.)

Using the PRE-CH Button to select the Previous Channel

1Press the PRE-CH button.The TV will switch to thelast channel viewed.

�

To quickly switch between twochannels that are far apart, tune toone channel, then use the numberbutton to select the second channel.Then, use the PRE-CH button toquickly alternate between them.

Channel Scan

1Press the CH.SCAN button.

The TV automatically scan all of the channels it has memorized.

OP E R AT I O N

28

Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”,“ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter,a number, “*”, or a blank. When the INFO button is pressed, the channel label willappear next to the channel number.

1Press the CH or CHbutton to tune to the channel that will be labeled.


Press the � or � buttonto select “Channel”, thenpress the ENTER button.

3Press the � or � button toselect “Name”.

Press the ENTER button tobegin labeling. The left-mostfield will be highlight.(Each label has four fields.See top paragraph.)

4Press the � or � button to select a letter, a number,“*” or a blank.(Pressing � or � buttonresults in this sequence: A, B,...Z, *, blank, 0, 1, ...9).

�

Note: You cannot select “Name”in the AV mode.

5Press the √√ button toswitch to the next field,which will be highlight.Select a second letter ordigit using the � or �button, as above.Repeat the process to selectthe last two digits.


Air 11

Move Enter Return

Channel

Auto Program √√



Move Adjust Return

Channel

Move Adjust Return

Channel

Move Enter Return

Channel

Auto Program √√



Auto Program √√


Air/CATV : AirName : P---

Auto Program √√


Air/CATV : AirName : PBS2

OP E R AT I O N

29

Setting the Clock

Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.)

Option 1: Setting the Clock Manually


Press the … or † buttonto select “Setup”, thenpress the ENTER button.

�

When selecting the hours, besure to select the proper time of day(am or pm).

You can change the hours by press-ing the � or � button repeatedly (orby holding down either of these but-tons).

The current time will appear everytime you press the INFO button.

3Press the ENTER button toselect “Clock Mode”.Press the … or † button toselect “Manual”, then pressthe ENTER button.

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

Move Enter Return

Time

Clock - - : - - am √√

On Timer - - : - - am OffOff Timer - - : - - am OffSleep Timer : OffOn Timer Volume : 10

Move Enter Return

Clock

Clock Mode : Manual √√

Clock Set - - : - - am

4Press the … or † button toselect “Clock Set”, thenpress the ENTER button.

Press the œ or √ button tomove to “Hour” or “Minute”.Set the clock you want bypressing the … or † button,then press the ENTER but-ton.


2Press the … or † buttonto select “Time”, then pressthe ENTER button.

Press the ENTER button toselect “Clock”.

ManualAuto

Move Adjust Return

Clock


Clock Set 09 : 30 am

OP E R AT I O N

30

continued...

Option 2: Setting the Clock Automatically

The Clock can be set automatically if you are receiving a digital signal.


Press the … or † buttonto select “Setup”, thenpress the ENTER button.

3Press the ENTER button toselect “Clock Mode”.Press the … or † button toselect “Auto”, then press theENTER button.

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

Move Enter Return

Time

Clock - - : - - am √√

On Timer - - : - - am OffOff Timer - - : - - am OffSleep Timer : OffOn Timer Volume : 10

Move Enter Return

Clock


Clock Set - - : - - am

4Press the … or † button toselect “PBS Channel”, thenpress the ENTER button.Press the œ or √ button toselect your local PBS chan-nel, then press the ENTERbutton.

2Press the … or † buttonto select “Time”, then pressthe ENTER button.

Press the ENTER button toselect “Clock”.

ManualAuto

Move Adjust Return

Clock

Clock Mode : Auto √√

PBS Channel : Air 3Time Zone : ATL. √√

DST : No √√

�

Certain broadcasts may nottransmit the correct time. In thiscase, set the time manually.

OP E R AT I O N

31

5Press the … or † button toselect “Time Zone”, thenpress the ENTER button.Press the … or † button toselect the time zone for yourlocal area, then press theENTER button.

• ATL. : AtlanticEAST : EasternCEN. : CentralMTN. : MountainPAC. : PacificALAS. : AlaskaHAW. : Hawaii

Move Enter Return

Clock



DST : No √√

6Press the … or † button toselect “DST” (DaylightSaving Time), then press theENTER button.Press the … or † button toselect “Yes” or “No”, thenpress the ENTER button.


Move Enter Return

Clock



DST : No

ATL.EASTCEN.MTN.PAC.

ALAS.HAW.

�

The set time can be changedaccording to the broadcasting stationand signal when you set up autotime.If there is a difference between thereal time and set time, please set upmanual time.

NoYes

OP E R AT I O N

32


Press the … or † buttonto select “Picture”, thenpress the ENTER button.

Customizing the Picture

You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,Tint and according to personal preference. (Alternatively, you can use one of the “Automatic” settings. See next page.)

4Press the œœ or √√ button toincrease or decrease thevalue of a particular item.

For example, if you select“Brightness”, pressing the √√ button increases it.


�

After adjusting an item, the gaugewill automatically disappear (afterabout 10 seconds).

2Press the … or † buttonto select “Custom”, thenpress the ENTER button.(The words Contrast,Brightness, Sharpness,Color and Tint will appearon the screen.)

3Press the � or � buttonto select a particular item,then press the ENTERbutton.

Move Enter Return

Mode : Dynamic √√

Custom √√

Color Tone : Normal √√

Size : Normal √√

� More

Picture

Move Enter Return

Contrast : 100Brightness : 45Sharpness : 75Color : 53Tint : G 55 R 45

Custom

Move Enter Return

Mode : Custom √√

Custom √√



� More

Picture

Brightness 55

Move Adjust Return

OP E R AT I O N

33

Using Automatic Picture Settings

Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie” ) thatare preset at the factory. You can activate either Dynamic, Standard, Movie or Customby pressing the P.MODE button (or by making a selection from the menu). Or, you canselect “Custom” which automatically recalls your personalized picture settings.

• Choose Dynamic for viewing the TV during the day or when there isbrightlight in the room.

• Choose Standard for the standard factory settings.

• Choose Movie when viewing the movie.

• Choose Custom if you want to adjust the settings according to personalpreference (see “Customizing the Picture”, page 33).


Press the � or � buttonto select “Picture”, thenpress the ENTER button.

2Press the ENTER buttonagain.Press the � or � buttonto select the “Dynamic”,“Standard” “Movie” or“Custom” picture setting,then press the ENTER button.


Move Enter Return


Custom √√



� More

Picture

Move Enter Return

Mode : CustomCustomColor Tone : NormalSize : Normal� More

Picture

DynamicStandardMovieCustom

OP E R AT I O N

34

Adjusting the VolumePress the VOL + or – VOL – button to increase or decrease the volume.

Using the MUTE Button

At any time, you can temporarily cut off the sound using the MUTE button.

1Press the MUTE button andthe sound cuts off.The word “Mute” will appearin the lower-left corner ofthe screen.

2To turn mute off, press the MUTE button to again, or simply presseither the VOL + or VOL – button.

Mute

OP E R AT I O N

35

2Press the � or � buttonto select “Custom”, thenpress the ENTER button.


Press the � or � buttonto select the “Sound”, thenpress the ENTER button.

Customizing the Sound

You can use the on-screen menus to adjust the bass, treble and balance accordingto individual preference. (Alternatively, you can use one of the “automatic” settings.See next page.)

3Press the � or � buttonto select a particular item,then press the ENTER but-ton.

Move Enter Return

Sound


Custom √√

MTS : Stereo √√

Auto Volume : Off √√

� More

Move Enter Return

Sound


Custom √√

MTS : Stereo √√


� More

Move Enter Return

Custom

Bass : 50Treble : 50Balance : L 50 R 50

4Press the œœ or √√ button toincrease or decrease thevalue of a particular item.

For example, if you select“Treble”, pressing the √√button increases it.


Treble 55

Move Adjust Return

OP E R AT I O N

36

Using Automatic Sound Settings

Your TV has four automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”)that are preset at the factory. You can activate either Standard, Music, Movie or Speechby pressing the S.MODE button (or by making a selection from the menu). Or, you canselect “Custom”, which automatically recalls your personalized sound settings.

• Choose Standard for the standard factory settings.

• Choose Music when watching music videos or concerts.

• Choose Movies when watching movies.

• Choose Speech when watching a show that is mostly dialogue (i.e., news).

• Choose Custom to recall your personalized settings.

(see “Customizing the Sound”, page 35).

2Press the ENTER buttonagain.Press the � or � buttonrepeatedly to select the“Standard”, “Music”“Movie”, “Speech” or“Custom” sound settings,then press the ENTER button.




Move Enter Return

Sound


Custom √√

MTS : Stereo √√


� More

Move Enter Return

Sound

Mode : CustomCustomMTS : MonoAuto Volume : Off� More

StandardMusicMovieSpeechCustom

OP E R AT I O N

37

�

Quick way to access the externalsignal source: Just press the“TV/VIDEO” button on the remotecontrol.

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment,such as VCRs, DVD, Set-Top Box and the TV source (broadcast or cable).

Setting the Signal Source

1Press the MENU button todisplay menu, then press theENTER button.

2Press the ENTER buttonagain.Press the � or � buttonto select signal source,then press the ENTERbutton.

Move Enter Return


Edit Name √√

Input

Move Enter Return

TVAV1 - - - -

AV2 - - - -

S-Video - - - -

Component - - - -

Source List

AV 1

OP E R AT I O N

38

Assigning Names to External input mode

1Press the MENU button todisplay menu, then press theENTER button.

2Press the � or � buttonto select the “Edit Name”,then press the ENTERbutton.

Move Enter Return


Edit Name √√

Input

Move Enter Return

Source List : AV1 √√

Edit Name √√

Input

3Press the � or � buttonto select the Source List,then press the ENTERbutton.

Move Enter Return

AV1 : - - - - √√

AV2 : - - - - √√

S-Video : - - - - √√

Component : - - - - √√

Edit Name

4Press the � or � button to select external device(VCR, DVD, Cable STB,Sat. STB, AV Recv., DVDRecv., Game, Camcorder,DVD Combo), then pressthe ENTER button.

Set other signal sources(AV2, S-Video, Component)using the same method aslisted above.


Move Enter Return

AV1 : - - - - √√

AV2 : - - - - √√

S-Video : - - - - √√

Component : - - - - √√

Edit Name- - - -VCRDVDCable STBSat. STBAV Recv.DVD Recv.GameCamcorderDVD Combo

AV 1 VCR

SP E C I A L FE AT U R E S

39

Chapter Four


Changing the Color Tone


Press the � or � buttonto select the “Picture”, thenpress the ENTER button.

2Press the � or � buttonto select “Color Tone”, thenpress the ENTER button.

3Press the � or � buttonto select “Cool2”, “Cool1”,”Normal”, “Warm1” or“Warm2” according to per-sonal preference, thenpress the ENTER button.


Move Enter Return


Custom √√



� More

Picture

Move Enter Return


Custom √√

Color Tone : NormalSize : Normal √√

� More

Picture

Cool2Color1NormalWarm1Warm2

Move Enter Return


Custom √√



� More

Picture

3Press the � or � buttonto select “Normal” or“Zoom”, then press theENTER button.


Normal Zoom


40

• Normal (4:3) : Sets the picture to 4:3 normal mode.• Zoom : Magnifies the size of the picture on screen.

Changing the Screen Size



2Press the � or � buttonto select “Size”, then pressthe ENTER button.

Move Enter Return


Custom √√



� More

Picture

Move Enter Return


Custom √√


Size : Normal� More

Picture

NormalZoom

Move Enter Return


Custom √√



� More

Picture

�

Quick way to access the Screen size:Just press the P.SIZE button on theremote control.


41

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital NoiseReduction feature to help reduce any static and ghosting that may appear on the screen.



2Press the � or � buttonto select “Digital NR”, thenpress the ENTER button.

3Press the � or � buttonto select “On”, then pressthe ENTER button.


�

Pressing the � or � button willalternate between “On” and “Off”.

Move Enter Return

� MoreDigital NR : Off √√

Tilt : 0

Picture

Move Enter Return

� MoreDigital NR : OffTilt : 0

Picture

OffOn

Move Enter Return


Custom √√



� More

Picture


42

Tilt

Due to the Earth’s magnetic field there may be same minor image tilt dependingon the TV’s location. When this occurs, follow the steps below.



2Press the � or � buttonto select “Tilt”.

3Press the œœ or √√ button toadjust the Tilt.


Move Adjust Return


Tilt : 0

Picture

Move Adjust Return

Picture

Move Enter Return


Custom √√



� More

Picture


Tilt : 2


43

Using the R.Surf Feature

This feature allows you to set the TV to return to a particular channel after a certainamount of time. For example, you may be watching a channel when commercials start.You can set the R.Surf to “5 minutes”, then switch channels. After minutes, the TV willreturn to the original channel. To use the R.Surf feature:

1While you are watching thechannel to which you wantto return, press the R.SURFbutton. The on-screen dis-play will read “Surf off”.

2Press the R.SURF buttonagain to set the timer inthirty second intervals, upto five minutes.

3The time you set will begin counting down on the screen.When the time runs out, the TV will return to the channel youwere watching when you set the timer.

Surf Off

Surf 0: 30


44

Choosing a Multi-Channel Sound (MTS)Soundtrack

Depending on the particular program being broadcast, you can listen to Stereo, Mono, ora Separate Audio Program. (SAP audio is usually a foreign-language translation.Sometimes SAP has unrelated information like news or weather.)

2Press the � or � buttonto select the “MTS”, thenpress the ENTER button.

3Press the � or � button to select “Mono”, “Stereo” or“SAP”, then press theENTER button.


�

The text at the bottom of themenu tells you if the incoming audio is Mono, Stereo or SAP.



• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.

• Choose Stereo for channels that are broadcasting in stereo.• Choose SAP to listen to the Separate Audio Program, which is usually a

foreign-language translation.

�Quick way to access the MTS:

Just press the “MTS” button on theremote control.

Move Enter Return

Sound


Custom √√

MTS : Stereo √√


� More

Move Enter Return

Sound


Custom √√

MTS : MonoAuto Volume : Off √√

� More

MonoStereoSAP

Move Enter Return

Sound


Custom √√

MTS : Stereo √√


� More


45

Extra Sound Settings (Auto Volume, TurboSound or Pseudo Stereo)

The following sound settings can be adjusted to suit your personal preferences

• Auto VolumeEach broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. “Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

• Turbo SoundTurbo sound emphasizes the bass and treble frequencies to add fullness to the sound.You can select the turbo sound by simply pressing the “TURBO” button on the remotecontrol.

• Pseudo Stereo“Pseudo Stereo” converts a monaural sound signal into two identical left and right channels. Once the “Pseudo Stereo” is set to “On” or “Off”, the setting applies to thesound effects such as “Standard”, “Music”, “Movie” and “Speech”.


Press the � button toselect the “Sound”, thenpress the ENTER button.

2Press the � or � buttonto select the required item(Auto Volume, Turbo Sound,Pseudo Stereo), then pressthe ENTER button.

Move Enter Return

Sound


Custom √√

MTS : Mono √√

Auto Volume : Off� More

OffOn


Press the EXIT button toexit. Move Enter Return

Sound


Custom √√

MTS : Mono √√

Auto Volume : Off� More

OffOn

Move Enter Return

Sound


Custom √√

MTS : Mono √√


� More


46

Setting the On/Off Timer


Press the � or � buttonto select the “Setup”, thenpress the ENTER button.

2Press the ENTER button toselect “Time”.

�

Before using the timer, you mustset the TV’s clock. (See “Setting theClock” on page 30).

When any of the timers are set, the“Timer” LED will illuminate (frontpanel of TV.)

3Press the � or � buttonto select the “On Timer”,then press the ENTER but-ton.

Press the � or � buttonrepeatedly to select theappropriate hours (i.e.,the hour when the TVwill turn on.)

Move Adjust Return

Time

Clock 09: 30am √√

On Timer 06: 00am OffOff Timer - - : - - am OffSleep Timer : OffOn Timer Volume : 10

Move Enter Return

Time


On Timer 06: 00am OffOff Timer - - : - - am OffSleep Timer : OffOn Timer Volume : 10

4Press the √√ button toselect the minutes.(The minutes digits will be highlighted.)

Press the � or � buttonto select the appropriateminutes.

Move Adjust Return

Time


On Timer 06: 30am OffOff Time - - : - - am OffSleep Timer : OffOn Time Volume : 10

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More�

To deactivate the “On time,”select “Off” during this step.

Move Adjust Return

Time


On Timer 06: 30am OnOff Timer - - : - - am OffSleep Timer : OffOn Timer Volume : 10

5Press the √√ button to select “On” or “Off”.

Press the � or � button to turn the on-timer “On”.(Repeatedly pressing the � or � button will alternate between “On”and “Off”.)When finished, press the MENU button.


47

1Press the SLEEP button onthe remote control.

2Press the SLEEP buttonrepeatedly until the appro-priate time intervalappears (any of the presetvalues from “Off” to“180”).

�

After about 5 seconds, the sleepdisplay will disappear from thescreen, and the time interval will beset.

Setting the Sleep Timer

The sleep timer automatically shuts off the TV after a preset time(from 30 to 180 minutes).

�

Absent Power OffWhen you set the timer “On”, yourtelevision will eventually be turnedoff, if you do not operate anycontrols during the 3 hours after theTV is turned on by timer.This function is available in only thetimer “On” mode and will prevent aleakage accident or overheating,caused by your TV left on for a longtime due to the timer “On” (whenyou are away on holiday, forexample).

Move Adjust Return

Time


On Timer 06: 30am OnOff Timer - - : - - am OffSleep Timer : OffOn Timer Volume : 10

Sleep Timer : 30

6To set the Off Timer, pressthe � or � button toselect “Off Time”.Press the ENTER buttonand set the hours and min-utes. (Follow the same pro-cedure as in steps 3~5above.)

When finished setting thetimer, press the EXIT buttonto exit.


48

Setting the Preferred Volume Level

The preferred volume can be set for when the timer automatically turns on the TV.



2Press the ENTER button toselect “Time”.

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

3Press the � or � button toselect “On Timer Volume”.Press the œœ or √√ button to adjust volume level.

Press the EXIT button toexit. Move Adjust Return

Time


On Timer 06: 30am OnOff Timer 12: 00pm OnSleep Timer : OffOn Timer Volume : 15

Move Enter Return

Time


On Timer 06: 30am OnOff Timer 12: 00pm OnSleep Timer : OffOn Timer Volume : 10


49

2Press the � or � buttonto select the “V-Chip”, thenpress the ENTER button.

The “Enter PIN” screen willappear. Enter your 4-digitPIN number,

Enter PINEnter PIN : - - - -

Using the V-Chip

The V-Chip feature automatically locks out programming that is deemed inappropriatefor children. The user must first enter a PIN (personal ID number) before any of the V-Chip restrictions can be set up or changed.

Note : When the V-chip feature is active, channel-auto program features do not function.

Setting Up Your Personal ID Number (PIN)

Note: If you forget the PIN,press the remote-control keys in thefollowing sequence, which resets thepin to 0-0-0-0:

POWER OFF ➜ MUTE ➜ 8 ➜ 2 ➜4 ➜ POWER ON.

�

Note: The default PIN number for a new TV set is “0-0-0-0”.



Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

3After entering a valid PINnumber, the “V-Chip”screen will appear.Press the � or � buttonand select “Change PIN.”

Move Enter Return

V-Chip

V-Chip Lock : NoTV Parental Guidelines √√

MPAA Rating √√

Change PIN √√

4While the “Change pin”field is selected, press theENTER button. The Change pin screen willappear. Choose any 4-dig-its for your PIN and enterthem.

As soon as the 4 digits are entered, the “Confirm new pin” screenappears. Re-enter the same 4 digits. When the Confirm screendisappears, your PIN has been memorized.Press the EXIT button to exit.

Change PINEnter New PIN : - - - -

Confirm New PINConfirm New PIN : - - - -

<USA>

Move Enter Return

V-Chip

� MoreCanadian French √√

Change PIN √√

<Canada>


50

How to Set up Restrictions Using the “TV guidelines”

First, set up a personal identification number (PIN), and enable the V-Chip.(See previous section.) Parental restrictions can be set up using either of two methods:The TV guidelines or the MPAA rating.

How to Enable/Disable the V-Chip






Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More






Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

3To enable the V-Chip fea-ture, press the √√ button sothat the “V-Chip Lock” fieldis Yes. (Pressing the √√ but-ton will alternate betweenYes and No.)

Move Enter Return

V-Chip

V-Chip Lock : YesTV Parental Guidelines √√

MPAA Rating √√

Change PIN √√

<USA>

Move Enter Return

V-Chip


MPAA Rating √√

Canadian English √√

� More

<Canada>


51

Note: These categories consist oftwo separate groups: TV-Y and TV-Y7(young children through age 7), andTV-G through TV-MA (everybodyelse).

The restrictions for these two groupswork independently: If a householdincludes very young children as wellas young adults, the TV guidelinesmust be set up separately for each agegroup. (See next step.)

�

3Press the � or � buttonto select the “TV ParentalGuidelines”, then press theENTER button.

Move Enter Return

V-Chip


MPAA Rating √√

Change PIN √√

4The “TV ParentalGuidelines” screen willappear.Press the �, � buttons toselect one of the six age-based categories:

Move Enter Return

TV Parental guidelinesAll FV V S L D

TV-Y √√ UTV-Y7 √√ U U

TV-G √√ UTV-PG √√ U U U U UTV-14 √√ U U U U UTV-MA √√ U U U U

B: Blocked U: Unblocked

TV-Y Young childrenTV-Y7 Children 7 and over-----------------------------------TV-G General audienceTV-PG Parent GuidanceTV-14 Viewers 14 and overTV-MA Mature audience

5At this point, one of the TV-Ratings is selected.

Press the ENTER button: Depending on your existing setup, a letter “U” or “B” will be selected.(U= Unblocked, B= Blocked)

While the “U” or ”B” is red, press the � or � button to block or unblock the category.

Press the MENU button once to save the TV Parental Guidelines. A TV-Rating will be selected, and no letterswill be selected. To exit this screen, press the MENU button again. To select a different TV-Rating, press the �or � button and then repeat the process.

Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings:

FV: Fantasy violenceD: DialogL: Adult languageS: Sexual situationV: Violence

Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if youblock “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then allthe categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L,S, V) work together similarly. (See next section.)

<USA>

Move Enter Return

V-Chip


MPAA Rating √√


� More

<Canada>

continued...


52

6How to set the FV, D, L, S and V sub-ratings:

First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).

Next, while the TV-Rating is selected , repeatedly press the √√ button. This will cycle through the available sub-ratings (FV,L, S, D or V).

A letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is selected, press the � or �button to change the sub-rating.

Press the MENU button once to save the TV Parental Guidelines. A TV-Rating will be selected, and no letterswill be selected. To exit this screen, press the MENU button again. To select a different TV-Rating, press the �or � button and then repeat the process.

Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you block“L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.

7Press the EXIT button to clear all the screens. (Or proceed to the next section, and set up additional restrictionsbased on the MPAA codes).

How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13, R, NC-17, X

The MPAA rating system uses the Motion Picture Association of America (MPAA) system,and its main application is for movies. (Eventually, movie videocassettes will be encodedwith MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).






Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More


53

Note: The V-Chip will automati-cally block any category that is “morerestrictive.” For example, if you blockthe “PG-13” category, then “R,” “NC-17,” and “X” will automatically beblocked also.

�

4The “MPAA Rating” screenwill appear.Repeatedly press the � or� button to select a par-ticular MPAA category.Pressing the � or � but-ton will cycle through theMPAA categories:

Move Enter Return

MPAA RatingB/U

G √√ UPG √√ UPG-13 √√ UR √√ UNC-17 √√ UX √√ UNR √√ U


G General audience (no restrictions).

PG Parental guidance suggested.

PG-13 PG-13 (Parents strongly cautioned).

R R (Restricted. Children under 17 should be accompanied by an adult).

NC-17 No children under age 17.

X X (Adults only).

NR Not rated.

While a particular category is selected, press ENTER to activate it.A letter (“U” or “B”) will be selected. Press the � or � button toselect “U” or ”B”.

Press the EXIT button to save the settings and to clear all screens.

3Press the � or � buttonto select the “MPAARating”, then press theENTER button.

Move Enter Return

V-Chip


MPAA Rating √√

Change PIN √√

<USA>

Move Enter Return

V-Chip


MPAA Rating √√


� More

<Canada>

How to Set up Restrictions Using the Canadian English






Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

continued...


54

4The “Canadian English”screen will appear.Repeatedly press the � or� button to select a partic-ular Canadian English cate-gory. Pressing the � or �button will cycle throughthe Canadian English cate-gories:

Move Enter Return

Canadian EnglishB/U

E √√ UC √√ UC8+ √√ UG √√ UPG √√ U14+ √√ U18+ √√ U


E Exempt programming includes...news, sports,documentaries and other information programming, talk shows, music videos, and variety programming.

C Programming intended for children under age 8.C8+ Programming generally considered acceptable

for children 8 years and over to watch on their own.

G General programming, suitable for all audiences.PG Parental Guidance.

14+ Programming contains themes or content whichmay not be suitable for viewers under the age of 14.

18+ Adult programming.

While a particular category is selected, press ENTERto activate it.A letter (“U” or “B”) will be selected. Press the � or� button to select “U” or ”B”.

Press the EXIT button to save the settings and toclear all screens.

3Press the � or � buttonto select the “CanadianEnglish”, then press theENTER button.

Move Enter Return

V-Chip


MPAA Rating √√


� More

How to Set up Restrictions Using the Canadian French






Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More


55

4The “Canadian French”screen will appear.Repeatedly press the � or� button to select a partic-ular Canadian French cate-gory. Pressing the � or �button will cycle throughthe Canadian French cate-gories:

Move Enter Return

Canadian FrenchB/U

E √√ U

G √√ U8 ans+ √√ U13 ans+ √√ U16 ans+ √√ U18 ans+ √√ U


E Exempt programming includes...news,sports, documentaries and other information programming, talk shows, music videos, and variety programming.

G General.

8 ans+ 8+ General-Not recommended for young children.

13 ans+ Programming may not be suitable for children under the age of 13.

16 ans+ Programming is not suitable for children under the age of 16.

18 ans+ Programming restricted to adults.

While a particular category is selected, pressENTER to activate it.A letter (“U” or “B”) will be selected. Press the � or� button to select “U” or ”B”.

Press the EXIT button to save the settings and toclear all screens.

3Press the � or � buttonto select the “CanadianFrench”, then press theENTER button.

Move Enter Return

V-Chip

� MoreCanadian French √√

Change PIN √√

How to Reset the TV after the V-Chip

Blocks a Channel (“Emergency Escape”)

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following mes-sage will appear: “Excessive rating.”

To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, usethe V-Chip function for an “emergency escape”:

Press the MENU button to display the menu. Press the � or � button to select the “Setup” menu and press theENTER button.Press the � or � button to select the “V-Chip” menu and press the ENTER button. Enter your PIN number, andpress the √√ button to temporarily disable the V-Chip Lock.


56

�

Misspellings and unusual characters sometimes occur duringclosed caption transmissions, espe-cially those of live events. There maybe a small delay before captionsappear when you change channels.These are not malfunctions of the TV.

3Press the ENTER button,then press the � or �button to turn closed cap-tioning “On” or “Off”.Press the ENTER button.

�

In “Caption” mode, captionsappear at the bottom of the screen,and they usually cover only a smallportion of the picture.

In “Text” mode, information unrelat-ed to the program, such as news orweather, is displayed. Text often cov-ers a large portion of the screen.

4Press the � or � button toselect “Mode”, then pressthe ENTER button.Press the � or � button toselect “Caption” or “Text”,then press the ENTER but-ton.

Viewing Closed Captions

Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed caption signal from television programs, so home-recorded videotapes also provide closed captions. Most pre-recorded commercial video tapes provide closedcaptions as well. Check for the closed caption symbol in your television schedule and on thetape’s packaging: .



2Press the � or � buttonto select the “Caption”, thenpress the ENTER button.

�

5Depending on the particular broadcast, it might be necessary tomake changes to “Channels” and “Field”:Use the �, �, œœ and √√ buttons to make the changes. (Followthe same procedure as in steps 3~4 above.)

Press the EXIT button to exit.

Different channels and fields display different information: Field 2 carries additional information that supplements the information in Field1. (For example, Channel 1 may havesubtitles in English, while Channel 2has subtitles in Spanish.)

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More

Move Enter Return

Caption

Caption : OffMode : Caption √√

Channels : 1 √√

Field : 1 √√

OffOn

Move Enter Return

Caption

Caption : OffMode : CaptionChannels : 1 √√

Field : 1 √√

CaptionText

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More


57



2Press the � or � buttonto select "Blue Screen",then press the ENTERbutton.

3Press the � or � buttonto select Blue Screen “On”,then press the ENTER but-ton.


�

Pressing the � or � button willalternate between “On” and “Off”.

Setting the Blue Screen Mode

If no signal is being received or the signal is very weak, a blue screen automaticallyreplaces the noisy picture background. If you wish to continue viewing the poor picture,you must set the “Blue screen” mode to “Off”.

Move Enter Return

Setup

Move Enter Return

Setup

� MoreLanguage : EnglishBlue Screen : OnMelody : On √√


OffOn

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More


Melody : On √√



58



2Press the � or � buttonto select “Melody”, thenpress the ENTER button.

Setting The On/Off Melody

You can hear clear a melody sound when the TV is powered on or Off.

Move Enter Return

Setup


Melody : On √√




Move Enter Return

Setup


Melody : OnDemonstration √√

OffOn

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More


59

3Each of the menu optionsis displayed in turn.When you wish to stopthe demonstration, pressany button on the remotecontrol.

Press the EXIT button to exit.

Viewing the Demonstration

To become familiar with the various menus provided by your television, you can view

the in built demonstration.



2Press the � or � buttonto select “Demonstration”,then press the ENTERbutton.

Move Enter Return

Setup


Melody : On √√


Move Enter Exit

Source List : AV1 √√

Edit Name √√

Input

Move Enter Return

Setup

Time √√

Plug & Play √√

V-Chip √√

Caption √√

� More


60

Customizing Your Remote Control

Your TV comes equipped with a universal remote control. In addition to controlling the TV,the universal remote control can also operate a Set-Top Box, VCR, Cable box and DVD (evenif your VCR, Cable box and DVD are made by manufacturers other than Samsung).

• The remote control might not be compatible with all VCRs, DVD players and Cable boxes.

1Turn off your VCR (Cable box or DVD player).

2Press the MODE button and make sure that the VCR (CABLE or DVD) LED isilluminated.

œ The remote control has fivemodes: TV, STB, VCR, CABLEand DVD.

3On your Samsung remote control, press the SET button.

4Enter 3 digits of the VCR (Cable box or DVD player) code listed on next pagefor your brand of VCR (Cable box or DVD player).

œ Make sure you enter 3 digitsof the code, even if the first digitis a “0”. (If more than one codelisted, try the first one.)

5Press the POWER button on the remote control. Your VCR (Cable box or DVDplayer) should turn on. If your VCR (Cable box or DVD player) turns on, yourremote control is now set correctly.

œ If your VCR (Cable box orDVD player) does not turn on,repeat steps 2, 3, and 4, but tryone of the other codes listed forthe brand of your particular VCR(Cable box or DVD player).

6Once your remote control is set up, press the MODE button any time you wantto use the remote to operate your VCR (Cable box or DVD player).

• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,PLAY/PAUSE and FF) will still operate your VCR (or DVD player).

• When your remote control is in the VCR (CABLE or DVD) mode, the volume buttons still con-trol your TV’s volume

Setting Up Your Remote Control to Operate Your VCR (Cable box

or DVD player)


61

VCR Codes

000001002003004005006007008009

011

014

015

016

017

018

019021

022

023

024

025

026027028

029030031032035

Samsung

LG(Goldstar)

Daewoo

Daewoo, LG(Goldstar)DaewooCurtis Mathes, Dimensia,General Electric, PROSCAN, RCABell & Howell, Fisher, JC Penny, JCL, Kenwood, Marantz, NEC, Quartz, Radio Shack, Realistic, Sanyo, Sears, TandyHitachi, JC Penny, Pentax,Pioneer, RCA, Sears, ToshibaAdmiral, Optimus, Radio Shack, Realistic, SharpCandle, Citizen, Craig, Curtis Mathes, General Electric, Go Video, JC Penny, MTC, Multitech, RCA, Samsung, TotevisionCanon, Curtis Mathes, Emerson, General Electric, Instant Replay, JC Penny, JCL, Magnavox, Marantz,Panasonic, Philco, Philips, Quasar, Radio Shack, Realistic, RCA, Sylvania, Technics, Teknika

Candle, Citizen, Emerson, LG(Goldstar), Radio Shack, Realistic, Sears, Toshiko, Teknika, TotevisionBroksonic, EmersonCraig, Fisher, Radio Shack, Realistic, Sanyo, SearsAudio Dynamics, Candle, Citizen,Daewoo, Emerson, Samsung, Scott, ToshibaColortyme, Curtis Mathes, DB, LG(Goldstar), Harman Kardon, JC Penny, JCL, Kenwood, Marantz, NECAiwa, Curtis Mathes, Dynatech,Emerson, Funai, Hitachi, Lloyd, LXI, MTC, Multitech, Radio Shack, Realistic, Signature, Sylvania, Symphonic, Tandy, Teac, TeknikaAudio Dynamics, DB, JC Penny,JCL, Kenwood, Marantz, NEC,Pioneer, SansuiAkai, Shintom, SonyFisher, SearsFisher, Radio Shack, Realistic,Sears, ToshibaEmersonTeknikaAkai, SamsungAkai, EmersonShintom, Sony

059060061062

063064065066067069070071073074076077078079082084085086088

PioneerJC PennyCandle, Citizen, PortlandCanon, Curtis Mathes, General Electric, JC Penny, Magnavox, Panasonic, Philco, Radio Shack, Realistic, SylvaniaRCAShintomMagnavox, Philco, SylvaniaEmersonFisherLG(Goldstar)Marantz, NECEmersonCurtis Mathes, NECEmersonCurtis Mathes, Emerson, TMKEmerson, ScottRCA, TeacEmersonKLHPanasonicDaewooPanasonicAdmiral

036

037038

039

040041

042043044

045046047048050051052

053054

055

056057058

Electrohome, Emerson, Radio Shack, Realistic, SharpRCAMagnavox, Marantz, Philco,Philips, SylvaniaJC Penny, JCL, Kenwood, Marantz, NEC, Tatung, TeacLogik, Multitech, ShintomGeneral Electric, Multitech,SamsungPioneerEmersonHitachi, JC Penny, Pentax, RCA, SearsHitachiRCASonySharpEmerson, ScottEmerson, SamsungFisher, Radio Shack, Realistic,SearsPortland, QuasarCandle, Citizen, Daewoo,Portland, SharpCandle, Citizen, Curtis Mathes,LG(Goldstar), JCL, Kenwood, Marantz, NEC, Pentex Research+EmersonFisher, Sears, ToshibaEmerson, Scott, Toshiba

Cable Box Codes

000001002003004005006007008010011

012013015016

017019

020

021022023024025026027028029

030031032033034035036037

SamsungNawooTaePyungYangDeaRyungDongKukDaeHanLG(Goldstar)SaewooRCARegencyHamlin, Panasonic, Regal, SamsungGI, Hamlin, JerroldGI, JerroldAnvision, Cable Star, Eagle, Magnavox, Philips, Randtek, ViewstarNSCSylvania, Texscan

Eastern International, Hamlin,RegalHamlin, RegalZenithGI, JerroldOak, Osk SigmaTocomPioneerMagnavox, Philips, ViewstarPioneerMagnavox, Philips, Tocom,ViewstarSamsung

GI, Jerrold

Magnavox, Philips, ViewstarRCA, Panasonic, Sprucer

Magnavox, Philips, Viewstar

057058059060063065066067069070071072073074075076077

Tocom

Universal

TocomZenithStargate 2000Sylvania, TexscanPanasonic, ZenithJerrold

Samsung

JerroldRCA

GI

038039040

041

042044045046047048049

050051052054

056

GI, JerroldUnikaMagnavox, Philips, Unika,ViewstarMagnavox, Philips, Regency,ViewstarHamlinGI, JerroldHitachi, MacomOakPanasonicMagnavox, Philips, ViewstarMagnavox, Philips, Unika,ViewstarZenithHitachi, MacomPioneer, Samsung, Warner AmexGeneral Instrument, Hitachi,Jerrold, Signature, StarcomHamlin

DVD Codes

000001002

003004005

SamsungLG(Goldstar)Toshiba

JVCSonySharp

009 Curtis Mathes006007008

PanasonicPhilipsPROSCAN, RCA

Remote Control Codes

SP E C I A L FE AT U R E SChapter F ive

TR O U B L E S H O O T I N G

62

If the TV seems to have a problem, first try this list of possible problems and solutions.If none of these troubleshooting tips apply, then call your nearest service center.

Identifying Problems

Problem Possible Solution

Poor picture Try another channel.Adjust the antenna.Check all wire connections.

Poor sound quality. Try another channel.Adjust the antenna.

No picture or sound. Try another channel.Press the TV/VIDEO button.Make sure the TV is plugged in.Check the antenna connections.

No color, wrong colors or tints. Make sure the program is broadcast in color.Adjust the picture settings.If the set is moved or turned in a differentdirection, the power should be OFF for at least 30 minutes.

Picture rolls vertically. Adjust the antenna.Check all wire connections.

The TV operates erratically Unplug the TV for 30 seconds, then try operating it again.

The TV won’t turn on. Make sure the wall outlet is working.

ME M O

63

ME M O

AP P E N D I X

Cleaning and Maintaining Your TV

With proper care, your TV unit will give you many years of service. Please follow theseguidelines to get the maximum performance from your TV.

Placement

• Do not place the TV near extremely hot, cold, humid or dusty places.• Do not place the TV near appliances with electric motors that create magnetic fields,

such as vacuum cleaners.• Keep the ventilation openings clear; do not place the TV on a soft surface, such as

cloth or paper.• Place the TV in a vertical position only.

Liquids

• Do not handle liquids near or on the TV. Liquids that spill into it can cause seriousdamage.

Cabinet

• Never open the cabinet or touch the parts inside.• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or

chemicals.• Do not put heavy objects on top of the cabinet.

Temperature

• If your TV is suddenly moved from a cold to a warm place, unplug the power cord,and allow at least two hours for moisture that may have formed inside the unit to drycompletely.

Using Your TV in Another Country

If you plan to take your TV with you to a foreign country, please be aware of the differenttelevision systems that are in use around the world. A TV designed for one system maynot work properly with another system due to differences in the TV channel frequencies.

Specifications

Model

Voltage

Frequency of Operation

Power Consumption

Dimensions

(mm/inches)

Weight (Kg/ lbs)

TX-P3235

AC120 V

60 Hz

160 Watts

910 X 585 X 690/

35.83 X 23.03 X 27.17

68/149.92

TX-P2734

AC120 V

60 Hz

150 Watts

730 X 485 X 575/

28.74 X 19.09 X 22.64

43.5/95.90

TX-P2730

AC120 V

60 Hz

150 Watts

806 X 493 X598/

31.73 X 19.41 X 23.54

44/97.00

TX-P2728

AC120 V

60 Hz

150 Watts

766 X 558 X 586/

30.16 X 21.97 X 23.07

41/ 90.39

AA68-03283A-00

1-800-SAMSUNG (1-800-726-7864)

U.S.ASamsung Electronics America Service Division400 Valley Road, Suite 201Mount Arlington, NJ 07856www.samsungusa.com

CANADASamsung Electronics Canada Inc. Samsung Customer Care7037 Financial Drive Mississauga, Ontario L5N 6R3www.samsung.ca

Cod Remoto Samsung

Documents

Transcript of Cod Remoto Samsung