CNC Controlled Proffle Machining Center Axis -...
Transcript of CNC Controlled Proffle Machining Center Axis -...
GARNET XSCNC Controlled Profile Machining Center (3 Axis)
www.oz-machine.com by
01By focusing on providing convenient solutions for customers, and combining power and precision, GARNET XS lets the process-ing capacity be only limited by the users imagination, thanks to the 5.5 KW spindle motor with automatic tool replacement feature.
03With full automatic clamp positioning, GARNET XS automates many tasks assuming the work load of the user.
04Maintenance of transmission elements is accomplished by the automatic lubrication system which is offered as an optional feature increasing the service life for accuracy in processes.Capacity may be varied for processing of non-standard profiles with on demand optimization of size and number of clamps.
02Thanks to its built-in automatic magazine with capacity for 10 tools, GARNET XS saves time when switching to different operations.
Thanks its spindle which can operate in -90, 0 and +90 fixed angles, the 3-axis CNC machining center, GARNET XS can process different sizes of aluminum and PVC profiles and offer a wide spectrum of solutions to the user. The machine is developed to
carry out all-in-one milling, drain channel opening, punching, branding and end milling operations on aluminum and PVC profiles, and to perform special non-standard operations on different profiles The high processing capacity (200 mm x 200 mm) provides satisfactory user
experience with the machines' performance in all operations.
GARNET XSCNC Controlled Profile Machining Center (3 Axis)
www.oz-machine.com by
FEATURES
Used for performing milling, drain channel opening, drilling, branding and milling processes on aluminum and PVC profiles. » Non-standard specific operations on different profiles » CNC based control system » Ability to process at fixed angles of -90, 0 and +90 degrees » Automatic tool replacement » Automatic magazine for 10 tools » Automatic clamping positioning » Touchscreen » Remote access » High processing capacity to increase efficiency » 6000 mm profile can be machined by driving » Automatic lubrication in processing area
OPERATIONAL EQUIPMENT
» FRL » Automatic lubrication in processing area » Additional tool » Optional length on X-axis » Touchscreen » Remote access » Automatic tool replacement » Automatic magazine for 10 tools » Automatic clamping positioning
Optional Included
1749
mm
500 mm
2123
mm
1876 mm
414
mm
5006 mm
4506 mm
1709
mm
GARNET XSCNC Controlled Profile Machining Center (3 Axis)
www.oz-machine.com by
AXIAL DISTANCESX Axis (Longitudinal) 3380 mm
Y Axis (Lateral) 1060 mm
Z Axis (Vertical) 317 mm
W Axis (Head processing angles) -90° | 0 | +90°
PROCESSING LENGTHSX Axis (Longitudinal) 3000 mm
Y Axis (Lateral) 200 mm
Z Axis (Vertical) 200 mm
POSITIONING SPEEDX Axis (Longitudinal) 90 m/min
Y Axis (Lateral) 40 m/min
Z Axis (Vertical) 40 m/min
SPINDLE (HSD)Max. Rotation Speed 24000 rpm
Tool Holder ISO 30
Spindle Power 5 kW
Cooling Type Electric Fan
Tool Holders ER32
PROCESSABLE UNITSDirectly with tool (upper surface, lateral surface, heads) 4
AIRPressure 6-8 Bar
END MILLING UNITSaw Blade Diameter 200 mm
AUTOMATIC TOOL MAGAZINETool Magazine 10
PROFILE POSITIONINGProfile Reference Alignment 2
OPERATIONAL AREA CLAMPING UNITClamps, Standard Quantity 4
Clamps, Maximum Quantity 6
Automatic Clamp Positioning on X-axis
Özçelik, reserves the right to make modifications or improvements on any product without prior notice.