Clicker Question
description
Transcript of Clicker Question
![Page 1: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/1.jpg)
1
Cube A has edge length L and mass M. Cube B has edge length 2L and mass 4M. Which has greater density?
Clicker Question Room Frequency BA
Cube A has larger density. ρA = M/L3 , ρB = (4M)/(2L)3 = (1/2)M/L3 so object A has twice the density of object B.
A) A has larger densityB) B has larger densityC) A and B have the same density.
![Page 2: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/2.jpg)
2
• CAPA assignment #12 is due on Friday at 10 pm.• Next week in Section: Assignment #6• Finish reading Chapter 10 on Fluids• Midterm 3 scores are uploaded on CU Learn. Solutions
are posted on CULearn. Rough grade scale is
Announcements
Average = 62.2 out of 100Stan. Dev. = 17.3A range (80-100) B range (60-80)C range (45-60) D range (30-45)F range (0-30)
![Page 3: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/3.jpg)
3
Fluid DensityWe imagine that the volume V is completely filled with some “continuous” substance. We measure the mass m and the volume V then calculate the mass density ρmass as m/V.
Gases: Compressible (expand or compress)Liquids: Often nearly incompressible
We’ll typically assume, for a given substance, that the mass density is the same everywhere in side the fluid! This is a good assumption for statics.
SI Units are kg/m3 =1000 g/cm3
![Page 4: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/4.jpg)
4
Specific GravityAnother common and useful measure of density is the specific gravity (SG).
SGWater = 1SGIron = 7.9SGPb = 11.9SGIce = 0.92SGAlcohol= 0.79
No “visible” units because it is a ratio!
Specific Gravity (SG) of substance X ≡ρX
ρWateρ
![Page 5: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/5.jpg)
5
Back to square 2: Fluid “Forces”
When we try to apply Newton’s Laws to Fluids what do we use for the force?
Again we consider a “small” imaginary volume or box inside the body of fluid.
To find the force on the imaginary volume V, we use the concept of pressure. We find the force F on each side of the volume V and divide the magnitude of that force by the area A of that side. The pressure P is then F/A
Pat side of V =
ρFon side of V
Aof side V
![Page 6: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/6.jpg)
6
Units of Pressure
Pat side of V =
ρFon side of V
Aof side V
SI Units of Pressure: N/m2 = 1 Pascal (Pa)
English Units of Pressure: lb/in2 = 1 pound per square inch (psi)
How do these unit compare in size?
![Page 7: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/7.jpg)
7
Approximately(!) what is 1 psi in the SI unit Pa? (1 lb = 4.45 N)
Clicker Question Room Frequency BA
A) 5B) 200C) 7000D) 4 x 104
E) 1 x 105
Both force and area units have to be converted!
Guess estimate 1 lb
in2 ≈5 Nlb
g40 in1 m
⎛⎝⎜
⎞⎠⎟2
=8000Nm 2
Accurate Calculation 1
lbin2 =
4.45 Nlb
g39.4 in1 m
⎛⎝⎜
⎞⎠⎟2
=6910Nm 2
![Page 8: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/8.jpg)
8
Atomic View of Fluid Pressure from Air
Air consists mostly of oxygen and nitrogen molecules. At room temperature, the molecules have thermal energy and are moving around rapidly (speed ≈ 400 m/s), colliding with each other and with every exposed surface. The pounding of the air molecules on a surface, like the pitter-pat of rain on the roof, adds up to a large force per area: Patm = 14.7 psi.
In a later chapter we’ll calculate the force on the walls directly from these atomic collisions!
![Page 9: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/9.jpg)
9
Too Many Units of Pressure!
The most common pressure in everyday life is that coming from the atmosphere (at sea level) !
1 atmosphere = 1 atm = 14.7 psi = 1.013 x 105 Pa
= 1.013 bar = 760 torr
![Page 10: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/10.jpg)
10
The air pressure inside the Space Station is P = 12 psi. There are two square windows in the Space Station: a little one and a big one. The big window is 30 cm on a side. The little window is 15 cm on a side. How does the pressure on the big window compare to the pressure on the little window?
Clicker Question Room Frequency BA
A) same pressure on both windows B) 2 times more pressure on the big window C) 4 times more pressure on the big window D) 9 times more pressure on the big window
![Page 11: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/11.jpg)
11
The air pressure inside the Space Station is P = 12 psi. There are two square windows in the Space Station: a little one and a big one. The big window is 30 cm on a side. The little window is 15 cm on a side. How does the total force on the big window compare to the total force on the little window?
A) same force on both windows B) 2 times more force on the big window C) 4 times more force on the big window D) 9 times more force on the big window
Clicker Question Room Frequency BA
F = P*A
![Page 12: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/12.jpg)
12
Direction of Fluid Forces
Newton’s law deals with forces which are vectors! What is the direction of the force from fluid pressure?
For static fluids (no flow) the force is perpendicular to the surface of the side.
In the figure you see arrows for the force on each side of an imaginary cube of volume V.
Critical point: Pressure does not have any direction; the direction of the force from pressure depends on the orientation of the surface the pressure acts on.
![Page 13: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/13.jpg)
13
Is 15 psi a big pressure?
Yes!!!
We are normally unaware of this because forces on us are balanced.
Here are two video examples and a demo!
![Page 14: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/14.jpg)
14
Pascal’s Principle: If an external pressure is applied to a confined fluid, the pressure at every point within the fluid increases by that amount.
POUT =PIN
FOUTAOUT
=FIN
AIN
FOUT =AOUT
AIN
⎛⎝⎜
⎞⎠⎟FIN
Example: Hydraulic lift
Applying Outside Pressure to a Fluid
![Page 15: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/15.jpg)
15
Pressure in Fluids on a Planet I
For our first application of Newton’s 2nd Law on Fluids, let’s consider the result of gravity on the pressure in a fluid.
Consider an imaginary cube with each side of area A, the top at the surface and the bottom at depth h.
Each of the six faces contributes to the net force!
Four side faces cancel each other; what about top and bottom faces?
Fnet = Ftop + Fbottom = 0 Ph
Patm
Fnet = -PatmA + PhA - Mwaterg = 0
![Page 16: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/16.jpg)
16
Pressure in Fluids on a Planet II
Ph
Patm
Fnet = -PatmA + PhA - Mwaterg = 0
PhA =PatmA+MWateρg
Ph =Patm +MWateρg
A
Ph =Patm +ρWateρ(Ah)g
A =Patm + ρWateρhg
Pressure increases linearly with depth, proportional to g and ρ!
![Page 17: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/17.jpg)
17
More on Gravity and Pascal’s Principle
Pressure only depends on the depth; at a given depth the pressure is the same.
Gauge Pressure is the amount of pressure after subtracting Patm
Often people leave out the Patm, but if you want the total, absolute pressure, you must include it.
Ph =Patm + ρWateρhg
How do you know what kind of gauge you are reading?
![Page 18: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/18.jpg)
18
Example. At the surface of a swimming pool the pressure on a swimmer is due to air: Patm = 1 atm. At what depth in the pool will the pressure be 2 atm?
Ph =Patm + ρgh
1 atm ~ 105 Pa
h =Ph −Patm
ρg
h =2x105 −1x105 Pa
(1000kg/m 3)(10 m /s2≈10 m
![Page 19: Clicker Question](https://reader036.fdocuments.us/reader036/viewer/2022062521/56816722550346895ddba829/html5/thumbnails/19.jpg)
19
P =ρgh
As shown, two containers are connected by a hose and are filled with water. Which picture correctly depicts the water levels?
Clicker Question Room Frequency BA
Different depths would give different pressures! The net force on the fluid at the connection tube would not be zero and there would be flow!