Non-waterproof Flex Strip 3528 Series

PLCC-2 SMD LED as the light source

High Brightness, All single color

High luminance efficient and low power consumption

Long Life over 80, 000 hours of usable life

Easy Installation, 3M Self adhesive back side

The flexible LED strip can be divided by every three LEDs!

2 years limited warranty

HK-F8N-30 Series

5000mmX8mm SMD Light Ribbon (300-LED).

Printed Circuit Board Thickness: 0.2mm

Working Voltage: 12V DC.

Working Current: 2000mA (400mA per meter).

LED Angel: 120°

Package: 5 meters / reel

Matched Joint connector for easy installation after cutting

HK-F8N-60 Series

Drawing ------------------------------------------------------F8N-30------------------------------------------------------------------

------------------------------------------------------F8N-60------------------------------------------------------------------

Notes:

1. All dimension units are millimeters.

2. All dimension tolerance is ±1mm unless otherwise noted.

Characteristics Absolute Maximum Rating at TA=25℃

Absolute Maximum Rating Parameter Symbo

60LEDs/m Unit

Forward Current IF 2000 mA

Forward Voltage VF DC 12V V

Electrostatic discharge ESD 400 V

Operating Temperature Topr -25 +60∽ ℃

Storage Temperature Tstg -40 +80∽ ℃

Electrical / Optical Characteristics at TA=25℃

Part No. Color Wavelength Lumen(lm) Power Viewing Angle CRI Certifications

HK-F8N-WW-30 ◆ 3000K-4000K 1200 24 120° 75 CE/ROHS

HK-F8N-W-30 ◆ 7000K-8000K 1350 24 120° 78 CE/ROHS

HK-F8N-R-30 ◆ 620-630nm 1050 24 120° -- CE/ROHS

HK-F8N-G-30 ◆ 515-530nm 1140 24 120° -- CE/ROHS

HK-F8N-B-30 ◆ 455-470nm 660 24 120° -- CE/ROHS

HK-F8N-Y-30 ◆ 585-590 nm 840 24 120° -- CE/ROHS

HK-F8N-WW-60 ◆ 3000K-4000K 2400 48 120° 75 CE/ROHS

HK-F8N-W-60 ◆ 7000K-8000K 2700 48 120° 78 CE/ROHS

HK-F8N-R-60 ◆ 620-630nm 2100 48 120° -- CE/ROHS

HK-F8N-G-60 ◆ 515-530nm 2280 48 120° -- CE/ROHS

HK-F8N-B-60 ◆ 455-470nm 1320 48 120° -- CE/ROHS

HK-F8N-Y-60 ◆ 585-590 nm 1680 48 120° -- CE/ROHS

Notes: 1. Tolerance of measurement of luminous intensity±15%. 2. All the technical parameters are based on per roll.

Typical Applications

■ Idea for in advertisement and cabaret, cabinet, furniture, landscape and architectural lighting

■ Flexible LED strip with 3M self-adhesive back nearly sticks to all kind of underground.

■ Easy installation dedicated for room- and deco-light!

■ The matched connector for easy install after cutting strip

Safety Information

■ The SMD light ribbon itself and all its components may not be mechanically stressed. Assembly

must not damage or destroy conducting paths on the circuit board.

■ Installation of LED light ribbon (with power supplies) needs to be comply with all applicable electrical

and safety standards. Only qualified personnel should be allowed to perform installations. Correct

electrical polarity needs to be observed. Wrong polarity may destroy the ribbon.

■ Parallel connection is highly recommended as safe electrical operation mode.

■ Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload

and damage the ribbon.

■ Please ensure that the power supply is of adequate power to operate the total load.

■ When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical

insulated points between ribbon and the mounting surface.

■ Please pay attention to standard ESD precautions when installing the ribbon.

■ Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility

to provide suitable protection against corrosive agents such as moisture and condensation and other

harmful elements.

Package

5meter per roll