Chris Schladt Manufacturing Eng. Tech.
Transcript of Chris Schladt Manufacturing Eng. Tech.
Rock Island Arsenal - Joint Manufacturing & Technology Center
Chris Schladt – Manufacturing Eng. Tech.
UNCLASSIFIED
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO
Center of Industrial and Technical Excellence:
Mobile Maintenance Systems
Add on Armor Prototype, Development & Production
Foundry Operations
Advanced Manufacturing Center of Excellence
FY21 Workload: $179.2M Planned Revenue /
751.6K DLH
FY21 Major Programs:
Metalworking & Machining Shop Set (MWMSS)
HET Urban Survivability Kit (HUSK)
M997A3 Ambulance
M915A5 B-Kits
Stryker AoA
XM35
Highlights:
Vertically Integrated
Manufacturing
Machinist Apprentice Program
Readiness and modernization
through manufacturing
• Advanced
Manufacturing
• Obsolescence
• Integrated
Engineering
M9 ACE Detent
Plate (Additive
Manufacturing)
Demographics:1182 Total Employees
868 Permanent Civilians
2 Military
195 Temp/Term Civilians
117 Contractors
Average Age = 47 years old
Average Years = 12 years
Veterans = 26%
Rock Island Arsenal – Joint Manufacturing & Technology Center
M997A3 AmbulanceMetalworking & Machining Shop Set
HET Urban Survivability Kit
(HUSK)
Mission:Develop, manufacture and deliver readiness solutions
through conventional and advanced manufacturing
processes for the U.S. Army and Department of Defense
systems globally.
2
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO
RIA-JMTC Capabilities
Advanced/
Additive
Manufacturing
Vertically integrated metal manufacturer capable of taking a raw
material and bringing it to a finished product all under one roof.
3
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO
RIA-JMTC Forging Capabilities
40
• RIA Forging Dep.
Forging Hammers
- Pneumatic - 2k, 5k lb.
- Steam - 8k lb.
- Gravity Drop – 12k lb.
Upset Forge - (horizontal forge consisting ofa clamping, header and stationary die)
4
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO
RIA-JMTC Simulation Capabilities
40
Design 1 Design 2
Tension Compression
• RIA Simulation Capabilities
RIA has acquired two new modules for MAGMAsoft.
• MAGMAsoft – calculation of mold filling, solidification & cooling
• MAGMA HT Thermal
Optimization for metal cleanliness
Tracking and management of dross and other contaminants
Miro Segregation of elements
Heat Treatment
Reduction of process times in furnace
Minimization of distortion
• MAGMAstress
Maximum yield stress
Total Displacement
5
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO
RIA-JMTC Investment Additive Capabilities
40
• RIA 3D Wax Printer
RIA has acquired solidscape 3D wax printer
Build Envelope 6 x 6 x 4 inches (152.4 x 152.4 x 101.6 mm)
- Advantages
No Tooling Necessary
Accurate
- Disadvantages
Slow
6
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO
RIA-JMTC Sand Casting Additive Capabilities
40
• RIA Sand Printer
RIA has acquired ExOne Sand printer
Build Envelope 70.9 x 39.4 x 27.6 inches
(1,800 x 1,000 x 700 mm)
- Advantages
No Tooling Necessary
Accurate
Multiple sands types & sizes
65GFN, Ceramic, Chromite
- Disadvantages
Not cost efficient for large simple shapes
7
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO
Additive Manufacturing Capabilities
Largest Metal Build Volume10.82 in x 10.82 in x 14.96 in
275 mm x 275 mm x 380 mm
Total Metal Printers: 5
Applications: Metal parts. Reduced weight designs, simplified assemblies, conformal cooling, enhanced fluid flow, topology optimization, mass customization.
Largest Polymer Build Volume35.98 in x 23.98 in x 35.98 in
914 mm x 609 mm x 914 mm
Total Polymer Printers: 14*
Applications: High volume parts with high quality surface finishes and textures.
* Current Capabilities as of 2 NOV 2020
Materials:Ni718
316L Stainless Steel
17-4 PH Stainless
Steel
Maraging Steel MS1
Ti Gr5
Ti64 ELI
*Materials:ABS
PLA
ULTEM
PC
Nylon
Carbon Fiber
Kevlar
TPU
8
UNCLASSIFIED//FOUOUNCLASSIFIED//FOUO40
Questions ?
Foundry/Forging Division Chief.Jamie [email protected](309) 782-0770
Project Manager of Advanced Manufacturing Randl [email protected](309) 782-4251
Director of Manager of Advanced Manufacturing Edward [email protected](309) 782-7924
9