CHINA CATALOGUE PRODUCTS FOR LEATHERpielcolor.com/wp-content/uploads/2020/05/TDS... · FOR LEATHER....
Transcript of CHINA CATALOGUE PRODUCTS FOR LEATHERpielcolor.com/wp-content/uploads/2020/05/TDS... · FOR LEATHER....
CHINACATALOGUEPRODUCTS FOR LEATHER
C H I N A C A T A L O G U E
2 0 2 0 E D I T I O N
3
P R O D U C T S
0240 TA Dyeing agent 6
0315 AT Mixture of greasy polymers for pull-up effects 7
0341 AT Waterproof oil high concentration 8
0386 AK Amphoteric oil emulsion 9
0390 AT Oily polymer in emulsion for pull-up effects 10
0428 WA Waxes emulsion 11
0559 SW Leveller for suedes 12
0000 SERIES SPECIAL PRODUCTS P
AG
E
1
1420 UR Amphoteric aliphatic urethane for base coat 13
1435 UR Aliphatic urethane for basecoat 14
1438 UR Aliphatic urethane for basecoat 15
1441 UR Aliphatic urethane polishable 16
1444 UK Cationic urethane for base coat 17
1444 UK-FF Cationic urethane for base coat 18
1446 UK Cationic urethane for base coat 19
1717 UR Aliphatic Urethane emulsion for top coat 20
1748 UR Aliphatic Urethane for base coat 21
1000 SERIES URETHANES P
AG
E2008 RE Acrylic polymer for base coat 22
2120 RE Acrylic polymer for base coat 23
2320 RE Self-Crosslinker acrylic polimer 24
2327 RE Acrylic polimer in emulsion 25
2827 CP Compact 26
2841 CP Compact resin 27
2850 RT Acrylic polymer self crosslinkable 28
2863 CP Compact 29
2878 CP Cationic compact 30
2918 RE Acrylic polymer in emulsion 31
2935 RE Acrylic Polymer for impregnation 32
2940 RE Acrylic Polymer in emulsion 33
2952 RE Acrylic Polymer for impregnation 34
2955 RE Acrylic Polymer 35
2000 SERIES ACRYLIC RESINS AND COMPACTS P
AG
E
3000 SERIES DYES P
AG
E
2
3402 CA Black liquid dye 36
3422 CA Black liquid dye 37
4008 LP Protein Binder 38
4014 LP Protein Binder 39
4103 LP Protein Binder for base coat 40
4104 LP Protein Binder for base coat 41
4185 LK Cationic protein binder 42
4322 AA Waxes emulsion for polishable base coat 43
4350 AA Waxes emulsion for base coat 44
4558 AA Cationic Waxes emulsion 45
4570 AA Waxes emulsion 46
4610 AA * Filler 47
4685 AK Non-ionic wax emulsion 48
4689 AK Cationic wax emulsion 49
4000 SERIES
PROTEINS, WAXES, FILLERS AND AUXILIARES P
AG
E
6004 LA Lacquer nitro emulsion dilutable in water 50
6016 LA NC lacquer water based emulsion 51
6113 LA Dull NC lacquer water based emulsion 52
6450 LO Clear NC lacquer solvent borne 53
6000 SERIES LACQUER P
AG
E
7335 AM Dull Filler 54
7403 AH Water Repellent for water based systems 55
7620 AT Silicone polymer 56
7000 SERIES AUXILIARIES
8044 EE Leveller - penetrator 57
8060 EE Leveller - penetrator 58
8000 SERIES
9000 SERIES
PENETRATORS AND LEVELLERS
3
9300 PC Metallic and pearlize effect aqueous based pigments 59
9825 PK Cationic Water base pigment 60
7
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
0240 TADYEING AGENT
Properties
Strong penetrating power of the dyestuff in the crust dyeing.
Mixable in water. In hard waters and depending on the proportions, it may show a light turbidity.
Application
Dyeing crust leathers tanned chrome, chrome-synthetical, chrome-vegetable.
The quantities for use (relation 0240 TA/water) will have to be determined by trial.
Appearance
Spe. Gravity at 25 °C
Flash Point
Caution
Storage and transport
Transparent liquid
c.a. 0.880 g/cm3
23 °C
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
4
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
5
0315 ATMIXTURE OF GREASY POLYMERS FOR PULL-UP EFFECTS
Properties
Produces a medium to very dark pull up effect.
No highlighting of defects.
Excellent miscibility with water.
Soften leathers.
Provides a mellow handle.
Application
It can be used alone or mixed with water for Pull-up effect.
Normally applied by roller coating machine but diluting 1:1 with water it can be spray.
To lubricate the grain side, before finishing, it is recommended to apply by roller about 5 gr/ft, rest overnight and the next day polish and to continue with the finishing.
It is also advisable to soften leathers apply product on the flesh side.
Appearance
Solids
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Yellow transparent liquid
c.a. 95%
c.a. 0.890g/cm3
< 100 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 40 °C (41 °F and 104 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
6
0341 ATWATERPROOF OILHIGH CONCENTRATION
Properties
This oil provides a very high Waterproof property that exceeds all the requirements of both dynamic and static waterproof with very low water absorption. The advantage of this oil is that it will not destroy the wa terproof properties of the waterproof leathers and at the same time.it can improve tremendously the waterproof performance of the non waterproof or weak waterproof leathers.
Application
Waterproofed finishes for full grain or nubuck leathers, excellent p
hysical performance for both dynamic and static waterproof.
Remark
This product needs to stir well before using. If the mixture is prepared more than 1 hour, it needs to be stirred again before use.
Appearance
Solids
Viscosity at 25 °C
Caution
Storage and transport
Colourless liquid
c.a. 90-95%
c.a. 20-50 cPs
See instructions at drum label and on the Material Safety Data Sheet (MSDS)
Between 5 ºC and 35 ºC (41 ºF and 95 ºF) Keep away from freezing and sunstroke. Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
7
0386 AKAMPHOTERIC OILEMULSION
Properties
Remarkable level power.
Excellent behaviour in polishing and glazing.
Remarkable capacity of elimination of hair cell reflection in glossy
Black finishes of full grain leathers.
Due to its amphoteric nature, 0386AK is, in principle compatible with anionic and cationic products.
Application
Precoats and basecoats for polish or plate, on full grain or corrected grain leathers, specially for black, glossy finishes. Considering its properties, it can be combined with pigments 9900 PC or 9800 PK series as well as resins and poly urethanes of RE or RK, UR or UK series.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 37-39%
c.a. 6-7
c.a. 0.975 g/cm3
c.a. 200-900 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F) Keep away from freezing and sunstroke. Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
8
0390 ATOILY POLYMER IN EMULSION FOR PULL-UP EFFECTS
Properties
Greasy touch, moderate “Oil Pull-Up” effect, and darkening with high temperature plating (100 °C).
Medium speed of penetration that allows its application by pad or brush with no levelling troubles.
The penetration capacity is improved by high temperature drying. Nevertheless, due to its high concentration, it might be convenient in many cases to dilute it with water or a mixture of water / 0240 TA.
Its complete solubility in water allows an easy and inexpensive cleaning of the machine and tools used for its applications.
Excellent behaviour on roller machine.
Application
“Oil Pull-Up” finishes.
Oily finishes.
Impregnation for burnished and “Dallas” finishes.
Appearance
Solids
pH
Viscosity at 25 °C
Appearance
Caution
Storage and transport
Whitish thick liquid
c.a. 74-77%
c.a. 7.5-8.5
c.a. 1000-6000 cPs
Fluid paste
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
9
0428 WAWAXES EMULSION
Properties & Applications
Hard wax and medium high fusion point. With the help of the heat, it penetrates into t he leather, improving the fullness, with a very natural look, nice waxy feel and a combined lightness effect in the wrinkle, darkening and gloss y by rub or brushing, being all these characteristics typical from WAX finish. The possibility of applying a sli
ght following finishing, all ows modifications on the gloss and feel these finishes must be carefully studied, giving good results combinations resin protein for which we recommend our 2912 RE 、 2320 RE 、1441 UR 、 4 003 LP 、 4 103 LP and it i s suitable to apply them on non plated leathers, milled and hot ones if possible.
Suggestion for use
0428WA 100
WATER 100
1 spray coat Dry at 80ºC 100 ºC
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Brown liquid
c.a. 26.5-28.5%
c.a. 4.2-6.2
c.a. 1.005 g/cm3
c.a. 100 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke. Prolonged storages at high temperatures reduce the product life
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
10
0559 SWLEVELLER FOR SUEDES
Appearance
Solids
pH
Spe. Gravity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 2.5%
c.a. 8
c.a. 1.005 g/cm3
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
Properties
0559 SW is a very fine particle size polymer emulsion which has good binding power, specially design for colour/shade adjustment and also colour evenness for nubuck leather.
0559 SW also confers a certain degree of protection on Nubuck.
Application
0559 SW can be diluted with water apply by spray.
Our recommendation:
0559 SW 50
Water 50
PC 9000 1-5
1-2 heavy spray coats
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
11
1420 URAMPHOTERIC ALIPHATIC URETHANE FOR BASE COAT
Properties
Soft and flexible.
Good behaviour in milling.
Lightfastness.
Due to its non-ionic nature, it can be used without distinction in anionic or cationic formulations.
Application
1420 UR has an excellent adhesion properties and can be used for polishing or ironing base coats. Provides an elegant and non film forming properties to the leather.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
Whitish liquid
c.a. 20%
c.a. 8
c.a. 1.015 g/cm3
< 30 cPs
n.a.
See instructions at drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F) Keep away from freezing and sunstroke. Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
12
1435 URALIPHATIC URETHANE FOR BASE COAT
Film properties
Transparent.
Colourless.
Hardly sticky.
Not very elastic.
Semi soft.
Cold resistance: It breaks at -30 °C
Water absorption (24 hours): 6%
Finishing characteristics
High flexibility, even at low temperatures.
Good scratch resistance and lightfastness.
Application
Full grain finishes with a natural look and good solidities, specially for soft leathers: Upholstery and garment.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish colour
c.a. 35%
c.a. 8
c.a. 1.030 g/cm3
< 200 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
13
1438 URALIPHATIC URETHANE FOR BASE COAT
Film properties
Transparent
Colourless
Little sticky
Elastic
Semi soft
Cold resistance: Good till 30ºC
Water absorption (24 hours): 8%
Finishing characteristics
High flexibility, even at low temperature. Suitable for finishing in cold weathers such as garments and shoe upper. Good scratch resistance and lightfastness.
Application
Full grain finishes with a natural look and good fastness, specially for soft leather: Upholstery and garment.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Opaque lightly amber
c.a. 38-42%
c.a. 7.5-8.5
c.a. 1.030 g/cm3
25-500 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
14
1441 URALIPHATIC URETHANE POLISHABLE
Film properties
Transparent.
Colourless.
Non sticky.
Semi-elastic.
Soft.
Cold resistance: It breaks at -10 °C
Water absorption (24 hours): 4%
Finishing characteristics
High binding power.
Heavy resisting properties.
Low thermoplasticity.
Application
Auxiliary in formulations of proteinical basis, for precoats, basecoats, and topcoats, on full grain or corrected grain leathers, in glazing, polishing or plating finishes.
The most relevant characteristics of this type of finishes are: uniform gloss, excellent recovering properties, high rub fastness and scuff resistance, complete high temperature ironing resistance and thermomoulding resisting property.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Translucid liquid
c.a. 15%
c.a. 7.5
c.a. 1.030 g/cm3
< 50 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
15
1444 UKCATIONIC URETHANE FOR BASE COAT
Film properties
Transparent.
Colourless.
Sticky.
Very elastic.
Very soft.
Cold resistance: It breaks at -30 °C
Water absorption (24 hours): 15%
Finishing characteristics
Slight films of finishing, with a good binding power and remarkable index of dry and wet rubfastness, having also a good behaviour in the dry milling.
Application
As auxiliary or majority binder for cationic precoats and basecoats.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Clear white liquid
c.a. 14-16%
c.a. 4-5
c.a. 1.010 g/cm3
< 50 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
16
1444 UK-FFCATIONIC URETHANE FOR BASE COAT
Film properties
Transparent.
Colourless.
Sticky.
Very elastic.
Very soft.
Cold resistance: It breaks at -30 °C
Water absorption (24 hours): 15%
Finishing characteristics
Slight films of finishing, with a good binding power and remarkable index of dry and wet rubfastness, having also a good behaviour in the dry milling.
Application
As auxiliary or majority binder for cationic precoats and basecoats.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Milky liquid
c.a. 15%
c.a. 4.5
c.a. 1.010 g/cm3
< 50 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
17
1446 UKCATIONIC URETHANE FOR BASE COAT
Film properties
Transparent.
Colourless.
Sticky.
Very soft.
Very elastic.
Cold resistance: It breaks at -30 °C
Water absorption (24 hours): 6%
Finishing characteristics
It gives light finishes with very good adhesion and good behaviour during dry cleaning.
Application
Auxiliary binding agent or majority in bottomings or cationic grounding agent.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Translucent liquid
c.a. 15%
c.a. 5
c.a. 1.030 g/cm3
< 50 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
18
1717 URALIPHATIC URETHANE FOR BASE COAT
Film propertiesTransparent
Very glossy
Low elasticity
Medium
soft
Non sticky
ApplicationEspecially design to use by spray coat. Application by roller must be previously Checked:
spray coat
1717-UR 100
8060EE 20
0570FX 1 2
WATER 20
7610 AT 0 .5 1
Finishing CharacteristicsThis urethane has been specially designed for very shiny finishings, imitations of patent. It co nfers great filling and leveling and it does not affect the natural softness.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 19-21%
c.a. 7-9
c.a. 1.050 g/cm3
0-100 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
19
1748 URALIPHATIC URETHANE FOR BASE COAT
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 30%
c.a. 8.5
c.a. 1.035 g/cm3
< 400 cPs 2/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
Film properties
Transparent.
Colourless.
Non sticky.
Not very elastic.
Semi-Hard.
Cold resistance: It breaks at -20 °C
Finishing characteristics
Excellent covering and filling.
Good rates of dry flexometry.
Adherence and wet flexometry rates can be improved by combining 1748 UR with the acrylic resin appropriate for the type of leather (2319 RE, 2350 RE, 2130 RE).
Finished leathers with the combination: acrylic/1748 UR, present a very good behaviour in the manipulation and lasting in wet.
Application
Majority binder in basecoats for corrected grain leathers finishing.Excellent performance in the roller machine.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
20
2008 REACRYLIC POLYMER FOR BASE COAT
Film properties
Transparent, slightly yellowish.
Not much sticky.
Soft.
Good flexibility in cold.
Finishing characteristics
Good adhesion properties on full grain leathers and high flexometry.
It forms slight thickness films preserving at maximum the natural aspect.
Application
Garment and full grain finishes in general. Specially when there are adhesion problems and a good dry milling performance and/or high flex resistance are required.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Yellowish liquid
c.a. 19%
c.a. 4.5
c.a. 1.005 g/cm3
< 60 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
21
2120 REACRYLIC POLYMER FOR BASE COAT
Film properties
Transparent.
Colourless.
Hardly sticky.
Elastic.
Soft.
Cold resistance: It breaks at -25 °C
Water absorption (24 hours): 38%
Finishing characteristics
Very good adhesion, elasticity, and excellent dry milling performance.
Application
Finishing for gloves and clothing, having a high softness, good feeling touch and natural look.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Milky liquid
c.a. 20%
c.a. 4.2
c.a. 1.010 g/cm3
< 50 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
22
2320 RESELF-CROSSLINKERACRYLIC POLIMER
Characteristics
Non yellowing when exposed to UV light. Excellent resistance to solvents. Good adhesion and flexes. Good plating and print properties. Good dry milling behaviour.
Applications
Use to improve solvent resistance in basecoat system.
Should not be used as the sole resin. It will self crosslinker and subsequent finish coat must be applied within 24 hours to avoid poor intercoat adhesion. It may be sensitive with some polyurethane resins.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Milky White liquid
c.a. 29-31%
c.a. 7.5-8.5
c.a. 1.050 g/cm3
5-100 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
23
2327 REACRYLIC POLYMERIN EMULSION
Characteristics
Transparent.
Slightly yellowish.
Slightly sticky.
Soft.
Elastic.
Cold resistance: It breaks at -15 °C
Water absorption (24 hours): 10%
Finishing characteristics
Excellent flexibility and print retention. Good water soaking resistance.
Good resistance to cut through on embossing. Good UV resistance.
Application
Universal application as the soft component for basecoat formulation.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Milky white Liquid
c.a. 29-31%
c.a. 8.5-9.5
c.a. 1.010 g/cm3
5-100 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
24
2827 CPCOMPACT
Properties
High covering power.
Good print retention or behaviour.
High dry milling resistance.
Application
Basecoat compact for universal uses.
Apply by pad coat spray gun or roller coat till covering.
Appearance
Solids
pH
Viscosity at 25 °C
Density
Caution
Storage and transport
White liquid
c.a. 19-22%
c.a. 7.5-9.5
c.a. 1500-3000 cPs
c.a. 1.04 g/cm3
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke. Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
25
2841 CPCOMPACT
Film properties
Dull. Yelowish.
Non sticky.
Medium hardness.
Characteristics
Thin and micro fine extendable f ilm. Used on lightly finished or natural leathers. Good coverage without overfilling the grain. Very good masking power. Excellent cold crack / flex resistance properties.
Application
Use as the principal resin in garment and Nappa leather for basecoat. Can use alone or in combinations with other resins.
Suggestions for the application:
9900-PC 100
2841-CP 500
WATER 400
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Yellowish liquid
c.a. 23-25%
c.a. 7.7-8.2
c.a. 1.020 g/cm3
c.a. 10-100 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
26
2850 RTACRYLIC POLYMER SELF CROSSLINKABLE
Film properties
Very transparent, colourless, non sticky.
Soft.
Elastic.
Very good cold resistance -25 °C
Water absorption 8%
PER absortion 84%
Characteristics of the finishing
Excellent behaviour to dry and wet rubs and also in platting and piling.
Good filling capability and hardly sticky feel.
Application
Universal resin for all kind of finishes.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
Whitish liquid
c.a. 35%
c.a. 7.5
c.a. 1.030 g/cm3
< 100 cPs
n.a.
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
27
2863 CPCOMPACT
Film properties
Opaque | Yellowish
Non sticky | Flexible
Medium | Soft
Medium | Elastic
Characteristics
Good adherence, covering, rubs fastness and good embossing retention and dry milling ability.
Application
Basecoats for softy leathers, corrected grain and full grain.
Orientative recipes
Corrected grain Full grain
9900-PC 175 | 125
2863-CP 725 | 450
WATER 100 | 425
Appearance
Solids
pH
Viscosity at 25ºC
Caution
Storage and transport
Whitish Liquid
c.a. 21.5-23.5%
c.a. 8-9
300-1000
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
28
2878 CPCATIONIC COMPACT
Properties
Polishable cationic compound , soft, silky feel, excellent filling power. This over the time, is getting separated in two phases. The transparent phase remains on the bottom of the drum. It is necessary to stir well before its use, in order to get the mix right.
Application
It can be applied by spray or by roller coat machine. We suggest to rest the leathers overnight. Afterwards, polish and plate at 80ºC 100kg.F or its application, added 30% to 50% water.
Finishes
Intended for all kind of buffed leathers. If used as a sealing precoat with press,it is convenient to add 100g/l of 1444 UK. Also can use on full grain, adding 8868 EK.
Appearance
Solids
pH
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 11.5-13.5%
c.a. 4-5
c.a. 100-500 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
29
2918 REACRYLIC POLIMER IN EMULSION
Characteristics
Transparent film. Effective tightening of loose grain leather. It maintains a soft fine, grain break. It provides a mellow handle.
Application
Full grain leathers impregnation.
To optimize the performance, mix with the penetrator 8044EE (50 100 grs/lt. of the solution). Mix penetrator and water and add the resin later on. Use the mixture within the 48 following hours to its preparation Determine the o ptimum quantity of penetrators by making dropping trials.
Appearance
Solids
pH
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 19-21%
c.a. 7.5-8.5
5-50 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
30
2935 REACRYLIC POLYMER FOR IMPREGNATION
Resin of impregnation
The special physical-chemical properties of the emulsion make possible to obtain total and level penetrations normally, which eliminates problems about rebuffing, it increases the performance of the paper and does not damage the adherences of the following finishing coats.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 40%
c.a. 3
c.a. 1.040 g/cm3
< 100 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
31
2940 REACRYLIC POLYMER IN EMULSION
Characteristcs
Soft resin of impregnation. Effe ctive tightening loose grain leather.Good mechanical stability and flow out. Good adherence and flexibility.
Applications
Soft acrylic resin binder of universal application for full grain and corrected grain impregnations.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Yellow transparent liquid
c.a. 29-31%
c.a. 5.5-6.5
c.a. 1.040 g/cm3
5-100 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
32
2952 REACRYLIC POLYMER FOR IMPREGNATION
Film properties
Transparent.
Slightly sticky.
Elastic.
Soft.
Slightly yellowish.
Properties
Impregnation resin with excellent rates of penetration and capacity of break correction.
Its excellent penetration specially in retannings with remarkable vegetable character, optimizes the re-buffing as well as the adherence of basecoats, even in wet (water absorption: 20% in 24 hours).
Although it presents a full compatibility with different types of penetrators it will be important, due to its low electrolytes stability electrolytes, to comply with the general norm for the order of mixture in the preparation of solutions of impregnation: Water-Penetrator-Resin.
Application
Impregnation and re-impregnation of corrected grain leathers and splits.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Yellowish liquid
c.a. 34%
c.a. 4
c.a. 1.035 g/cm3
< 50 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
33
2955 REACRYLIC POLYMER
Film Properties
Transparent
Colourless
Hardly sticky
Elastic
Soft
Cold resistance: It breaks at 25ºC
Water absorption (24 hours): 38%
Finishing characteristics
Very good adhesion and elasticity, as well as an excellent dry milling performance.
Applications
Finishing for gloves and clothing, having a high softness, good feeling and natural look.
Appearance
Solids
pH
Viscosity at 25 °C
Caution
Storage and transport
Yellowish liquid
c.a. 19-21%
c.a. 3.5-4.5
0-100 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
34
3402 CABLACK LIQUID DYE
Properties
High dyeing efficiency.
Good general fastness.
Good capacity for penetration and evenness.
Dilatable in water.
Applications
Dyeing and redyeing any kind of leather without adding any solvent or penetrator. Color brightening in basecoats . Any application procedure can be used. Bathing gives excellent result.
Appearance
Solids
pH
Viscosity at 25 °C
Caution
Storage and transport
Black liquid
c.a. 20-23%
c.a. 4.5-6.5
0-50 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
35
3422 CABLACK LIQUID DYE
Properties
High dyeing efficiency.
Good general fastness.
Good capacity for penetration and evenness.
Dilatable in water.
Applications
Dyeing and redyeing any kind of leather without adding any solvent or penetrator. Color brightening in basecoats . Any application procedure can be used. Bathing gives excellent result.
Appearance
Solids
pH
Viscosity at 25 °C
Caution
Storage and transport
Black liquid
c.a. 12.5-15.5%
c.a. 6-8
0-50 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
36
4008 LPPROTEIN BINDER
Properties
Soft protein with high gloss, and tran s parent film. It gives non thermoplastic finishes of good behaviour during glazing, polishing and hand plating. Very natural aspect and handle. Good adhesion and dry flexes.
Application
Use in combination with others protein binders in polishing or glazing coats. When used in soft protein coats i t exhibits flexibility.
Use preferably on basecoats.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Brown liquid
c.a. 12.5-16.5%
c.a. 8-9,5
c.a. 1.020 g/cm3
c.a. 1000 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
40
00
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
37
4014 LPPROTEIN BINDER
Characteristcs
High gloss, hard and transparent. Excellent binding power. It improves plate release and stacking properties.
Application
On glazable, polishable and thermoplastic finishes, it improves adhesion, dry rubfastness and solvent resistant.
Use preferably in top coat.
Appearance
Solids
pH
Viscosity at 25 °C
Caution
Storage and transport
Brown liquid
c.a. 11.5-14%
c.a. 7-9
2.000 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
38
4103 LPPROTEIN BINDER FOR BASE COAT
Properties
Soft.
Glossy.
Slightly opalexent / Great filling power.
Application
Universal protein binder to use in base coats for all kind of.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 16.5%
c.a. 9.5
c.a. 1.030 g/cm3
c.a. 300 cPs 2/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
39
4104 LPPROTEIN BINDERFOR BASE COAT
Properties
Soft
Glossy
Cross
linkable in the presence of Formaldehyde
Application
Good behaviour in polishing from what it allows to achieve finishes of protein natrual look and shiny. Glazable finishes of napped leather. Good glazing for the top coat.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Beige liquid
c.a. 9.5-10.5%
c.a. 9-10
c.a. 1.030 g/cm3
500 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
40
4185 LKCATIONIC PROTEINBINDER
Properties
Medium hard protein cationic binder.
Glossy, very transparent. Non thermoplastic. Improves plate release and stacking properties. Very natu ral aspect.
Application
Cationic finishes polishable and glossy at plat ing . Anilines and semi-aniline
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Apricot liquid
c.a. 6.5-8.5%
c.a. 2-4
c.a. 1.010 g/cm3
0-300 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
41
4322 AAWAXES EMULSION FOR POLISHABLE BASE COAT
Properties
Due to the diverse nature of its components, it covers a large margin of temperatures of fusion, maximizing its performance in polishings, plattings and ironings.
Application
Polishable finishes.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Beige liquid
c.a. 13%
c.a. 9.5
c.a. 1.010 g/cm3
< 200 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
42
4350 AAWAXES EMULSION FOR BASE COAT
Properties
Nice warm and natural hand.
It improves filling and hot plating properties of basecoats formulations.
It levels absorption and it hides grain defects.
Application
Basecoats of garment and all kind of softy nappa.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 8%
c.a. 10
c.a. 0.995 g/cm3
< 150 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
43
4554 AACATIONIC WAXES EMULSION
Properties
Waxy feeling, very natural not slippery.
Recommended as a main Wax for a natural sealing coats.
Application in water system.
The compatibility with other products, has always to be tested previously.
Application
Top coat full grain leathers, specially destined to clothing, alone or combined with water based lacquers of our range.
Appearance
Ion Character
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
Lightly cationic
c.a. 9.5%
c.a. 4.5
c.a. 0.975 g/cm3
c.a. 500 cPs 3/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
44
4558 AACATIONIC WAXES EMULSION
Properties
Very natural waxy feeling, non-slippery.
Apply with water.
Compatible with cationic systems.
Application
Top feel modifier for full grain leathers, specially for garments.
Can be used in cationic basecoats.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25ºC
Caution
Storage and transport
Whitish liquid
c.a. 8.5-10.5%
c.a. 4-5
c.a. 0.955 g/cm3
200-750 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
45
4570 AAWAXES EMULSION
Characteristics
Nice feel, natural and soft. It improves the filling properties and hot platting. Good adherence between coats. It levels absorptions and it hides grain defects.
Application
On basecoats finishes of garment leathers and / or any kind of softy
Nappa leathers.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25ºC
Caution
Storage and transport
Milky white liquid
c.a. 6-8%
c.a. 9-11
c.a. 1.010 g/cm3
0-325 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke.Prolonged storages at high temperatures reduce the product life.
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
46
4610 AAFILLER
Characteristics
Filler of maximum performance. It forms a film completely dull and it provides a very good coverage without surcharge the grain. It improves the platting conditions and it reduces the stickiness in the plate.
Application
In thermoplastic formulations, aniline and/or semi-aniline.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
White liquid
c.a. 25-29%
c.a. 9.3-10.3
c.a. 1.100 g/cm3
c.a. 1500-2500 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)Keep away from freezing and sunstroke. Prolonged storages at high temperatures reduce the product life.
MAGICLINE
*
* MAGIC LINE: SERIE OF UPGRADING CHEMICALS
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
47
4685 AKNON-IONICWAX EMULSION
Characteristics
Soft wax of good behavior to polishing. It improves the filling and coverage and it levels the look by hiding the defects. If confers a warm feel, soft and natural.
Application
Use on polishable precoats and/or thermoplastic with other products..
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
Yellowish liquid
c.a. 24-28%
c.a. 6-8
c.a. 1.100 g/cm3
800 cPs
n.a.
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
48
4689 AKCATIONICWAX EMULSION
Characteristics
Use in cationic coats of sealing. It does not interfere in the adhesion between coats. It improves the filling and coverage. It provides waxy feel, warm, very natural.
Application
It can be applied in an aqueous means and it is compatible with the cationic systems.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
Yellowish liquid
c.a. 10.5-13.5%
c.a. 3.5-4.5
c.a. 1.010 g/cm3
0-100 cPs
n.a.
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
49
6004 LALACQUER NITRO EMULSIONDILUTABLE IN WATER
Properties
Very glossy and transparent
High rub fastness
Good performa
nce at plating
Compatible with our liquid dyestuffs
Application
Final coats in leather finishing for shoe wear and leather goods when a good performance is required in what concerns to gloss and fastness, avoiding using lacquers in solvent means. Its compatibility with our metal complex dyes, allows to colour it in order to obtain brightening or contrast effects, not only by applying it as intermediary coat, but also as top coat.
Appearance
Solids
Spe. Gravity at 25 °C
Flash Point
Caution
Storage and transport
White liquid
c.a. 15.7-16.7%
c.a. 0.960 g/cm3
70 °C
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
60
00
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
50
6016 LANC LACQUER WATER BASED EMULSION
Properties
Glossy.
Natural feel, not slippery.
Remarkable wet rub fastness.
Application
Final coat for full grain leathers, corrected grain and split.
Depending on the requirements regarding rub fastness, dilute with water from 1:0,5 to 1:1
Appearance
Solids
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
White liquid
c.a. 11%
c.a. 0.960 g/cm3
c.a. 255 cPs 2/60
46 °C
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
51
6113 LADULL NC LACQUER WATER BASED EMULSION
Properties
Dull colourless lacquer emulsion with natural look and feel.
6113 LA has not any matting agents, so fastness are not afected. It’s also possible to achieve a nice dull effect without grey appareance.
It’s recomended to be mixed with our 6016 LA to adjust final matt level.
Application
Last coat for dull finish of full grain nappa and nappalan.
Last coat for semi-dull/semi-gloss finishes mixed with other lacquers in range.
Appearance
Solids
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
White liquid
c.a. 14%
c.a. 0.975 g/cm3
< 50 cPs 1/60
17 °C
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
52
6450 LOCLEAR NC LACQUERSOLVENT BORNE
Properties
Used for high gloss finishes
Excellent rub fastness
Provides natural deep aniline finish
Uniform and smooth surface.
Exhibits waxy, pleasant handle
Application
Dilute 1:1 to 1:2 with thinner.
Appearance
Solids
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
Yellowish liquid
c.a. 24-26%
c.a. 0.900 g/cm3
2500-8500 cPs
28 °C
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
53
7335 AMDULL FILLER
Properties
Matt, dull, non thermoplastic.
Warm and silky feel.
It improves the piling conditions and it makes easy the hot plating.
Applications
It can be incorporated in any formulation on basecoats in an aqueous means. Use from 30 and 100 grs/lt (To be determined the suitable quantity prior to trial).
Appearance
Solids
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
White liquid
c.a. 18-21.5%
c.a. 1.100 g/cm3
c.a. 500-1.500 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
70
00
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
54
7403 AHWATER REPELLENT FOR WATER BASED SYSTEMS
Properties and Application
Versatility and simplicity are the advantages offered by 7403 AH.
It is applied in a water system.
It is applied
• Directly on crust leathers.
• On finished leathers.
• In basecoats formulations, top coats, water based lacquers, etc...
It multiple possibilities prevent to give recipies or application systems, which should be determined depending on requirements, type of leathers, article, etc...
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
Whitish liquid
c.a. 2.5%
c.a. 8.5
c.a. 1.005 g/cm3
< 25 cPs 1/60
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
55
SILICONE POLYMER 7620 AT
Properties
Silky feel, natural and slippery. It increases the dry and wet rubs resistance. It improves the abrasion and scratching resistance.
Application
Feel agent for aqueous tops, specially for urethane tops.
Use from 3-8% depending on the wished feel and look on the lacquer or urethane top. Resistant to the loss feel after ageing.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Caution
Storage and transport
White liquid
c.a. 21-25-%
c.a. 8-9
c.a. 1.000 g/cm3
100-600 cPs
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
56
8044 EELEVELLER
Properties
Surfactants of strong anionic character.
The compatibility with formulation has to be tested previously.
May give excellent result in:
Impregnations and dyeings specially in leathers and splits of vegetable retanning. (Max. 50 grs/l.)
First basecoats on full grain leathers with absorption problems. (Max. 25 grs/l.)
Aniline effects on embossed or plated leathers in order to avoid “drop” problem of the colour. (5-10 grs/l.)
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscosity at 25 °C
Flash Point
Caution
Storage and transport
Translucent liquid
c.a. 35%
c.a. 6.5
c.a. 1.005 g/cm3
< 50 cPs 1/60
36 °C
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 95 °F)
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
57
8060 EELEVELLER
Properties
It increases humectability and penetration capacity of finishing solutions without modifying its characteristics and non provoking the hardening of the leathers.
Application
Specially suitable for basecoats solutions sprayed on full grain leathers.
Avoiding dripping of aniline solutions applied after plating.
Although it is hardly necessary, it can be used in quantities till 100 grs/l. without damaging finishing properties or feel of leathers.
Appearance
Solids
pH
Spe. Gravity at 25 °C
Viscotity at 25 °C
Flash Point
Caution
Storage and transport
Translucent liquid
c.a. 7%
c.a. 7
c.a. 0.970 g/cm3
c.a. 20 cPs
34 °C
See instructions on drum label and on the Material Safety Data Sheet (MSDS)
Between 5 °C and 35 °C (41 °F and 104 °F)
80
00
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
58
9300 PCMETALLIC AND PEARLIZE EFFECT AQUEOUS BASED PIGMENTS
Product Color Solids % PHViscosity at 25ºC
9350 - PC Pearl 28-30 7.5-8.5 7000-15000
9353 - PC Gold 35.5-37.5 7.5-8.5 20000-30000
9353 - PC Bronze 35-39 7.5-8.5 20000-60000
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
59
9825 PKMETALLIC AND PEARLIZE EFFECT AQUEOUS BASED PIGMENTS
Product Color Solids % PHLight
Fastness (40hrs)
PVCMigration
(80ºC)
9825 - PKDeep Black
17-19 4-5 Passed/5 Passed/5
PIELCOLOR no puede controlar las condiciones de uso de sus productos por lo que no puede aceptar responsabilidades respecto a los resultados y/o consecuencias que deriven de su uso.
Pielcolor China | Building No.15-1 | No.48 HongMian Avenue, Xinhua Street, HuaDu District, Guangzhou City ,GuangDong P.R. China 510800
Tel: +86 20 8686 2818 Fax: +86 20 8686 2178
60
9900 PCANIONIC WATERBASE PIGMENT
Product Color Solids % PHUV LightFastness(72hrs)
PVCMigration(48hrs)
9901-PC White 44-46 7-9 Passed/5 Passed
9903-PC Yellow 17-19 7-9 Passed/5 Passed
9904-PC Orange 15-17 7-9 Passed/5 Passed
9905-PC Dark Brown 44.5-46.5 8-9 Passed/5 Passed
9906-PC Red 19.5-21.5 7-9 Passed/5 Passed
9907-PC Bordeaux 25-27 7-9 Passed/5 Passed
9908-PC Blue 25-29 9.5-10.5 Passed/5 Passed
9909-PC Ochre 38-40 7-9 Passed/5 Passed
9911-PC White 57-59 7-9 Passed/5 Passed
9916-PC Pink 21-23 8-9 Passed/5 Passed
9923-PCLemon Yellow
18.5-22.5 8.5-9.5 Passed/5 Passed
9925-PC Jet Black 12-14 8-10 Passed/5 Passed
9935.PC Tan 40-42 7-9 Passed/4-5 Passed
9125-PC Deep Black 19-21 8.5-9.5 Passed/5 Passed
PIELCOLOR, S.L.U.
DATA SHEETS CATALOG
2019 EDITION
ALL RIGHTS RESERVED
61
Pielcolor, S.L.U.Llevant, 7Polígon Industrial Llevant08150 Parets del VallèsBarcelona - SpainT: +34 93 580 67 27F: +34 93 691 20 [email protected]
Pielcolor BrazilRua Boa Vista 1832Portão - RS 93180-000 – BrazilF: +90 216 294 24 06
Pielcolor Trading ShanghaiBuilding 15-1,American Industrial Park,48 Hongmian Avenue,Xinhua Town, Huadu District,Guangzhou,510800 - ChinaT: 86 20 86 86 2818F: 86 20 86 86 2178
Pielcolor India3, K.M. Adam Street,Nagalkeni, Chromepet,Chennai - 600044 - IndiaT: 00-91-9940293201T: 00-91-9976991145
www.pielcolor.com
instagram.com/pielcolor