Chad W. Knight 114 South Pine St Eskridge, Ks 66423 785-449-2223 chadknight71@yahoo.com

WEI Energy Services with Siemens 05/10/16 - 05/15/16Ivanpah 2 Solar Thermall PlantPosition: Field MachinistDuties: Stetting up and running of milling machine. Machined off guide plates.Reason for Leaving: Completion of job.

WEI Energy Services with Westinghouse Rock Hill SC 4/12/16 - 4/19/16Westinghouse faciltyPosition: Field MachinistDuties: Mock up for thermalcouple raplacement for emergent work at Palo Verde Nuclear PlantReason For Leaving: Client dismissed job.

United Services Group 3/29/16 - 4/09/16Comanche Power StationPosition: Field MachinistDuties: Cutting out feedvater valve and drilling themalcouple Reason for leaving: Client dismissed job

WEI Energy ServicesIndian Point Nuclear Plant 03/17/16 - 03/23/16Position: Field MachinistDuties: Drilling and tapping studs on turbine valvesReason for leaving: ROF

Powerhouse MechanicalBrunswick Nuclear Plant 02/14/16 - 03/14/16Position: Field MachinistDuties: Machining on boiler feed water valve seatsReason for leaving: ROF

Arc Energy - Donaldsonville, La. CF Industries 01/25/15 - 02/10/15Position: Field MachinistDuties: Cutting and belveling heavy wall pipe. 18" - 26"Reason for leaving: Going to Brunswick Nuclear Plant

FENOC- Beaver Valley Nuclear Plant 10-2015 - 10-2015 Position: Field Machinist.Duties: Metrology on steam generators. Reason for leaving: ROF

Powerhouse Mechanical 09/2015 - 10/2015 US Nitrogen Position: Field Machinist. Duties: Machining on heat exchanger and smaller flanges. Reason for Leaving: Completion of project.

Aerotek/TAI 06/2015 - 09/2015 Bleach plant project Eddyville, Iowa Position: Pipefitter. Duties:

Fabrication of hangers and supports, fitting PVC and CPVC pipe from 3/4" - 16". Plastic welding.Reason for Leaving: Layoff

WEI 04/2015 West Havastraw, New York Position: Field Machinist Duties: Set up boring bar on boiler field water pump. Reason for Leaving: ROF

Bolttech Mannings 04/2015 Gila Bend, Arizona Gas Plant Position: Field Machinist Duties: Stud Removal and retapping of stud bolt hole on main steam valve. Reason for Leaving: Completion of project.

DZ Atlantic Wolf Creek Nuclear Plant 01/2015 - 03-2015 Position: Pipefitter Duties: Cutting and beveling pipe for water hammer project, fabrication of hangers and supports, replacing cast iron drain line. Reason for Leaving: ROF

Chad W. Knight 114 S. Pine St. Eskridge, Ks. 66423 785-449-2223 chadknight71@yahoo.com

I am a field machinist, millwright and valve mechanic. I have current TWIC, OSHA 10 and Basic Plus, and CSTOP, Wyoming / Montana Safety Council cards that are current. I have worked in the ethanol, nuclear, gas, oil, sugar beet and coal fire plants. Duties from field machining cutting and beveling pipe and refacing flanges. aligning pumps and motors, rebuilding valves, pipe fitting etc. I can be reached at 785-449-2223 if you need any further information. I look forward to hearing back from you soon.

03/01/14 - 08/04/2014PTS Travelers / Bolttech ManningsPosition: Field MachinistDuties: Cutting and beveling pipe, Drilling and tapping holes on valves. Reason for Leaving: End of job, Have been back to same job with PTS/Bolttech Mannings from 03/ 2014 - 05/ 2014 and then again in 07/2014 - 08/ 2014.

11/17/13 – 12/03/13Casey IndustrialPosition: MillwrightDuties: Setting Pads for Caterpillar motors and piping in of the lube oil stations. Bolt up of Y pipe, mixing pipes and rupture discs.Reason for Leaving: Discrepancy on pay rate.

09/15/13 – 10/05/13Furmanite/ISC Craft (Air Products)Position: Field MachinistDuties: Unbolting and removal of doors on the reformer for inspection. Blinding and changing out valves.

Bolting, torquing and tensioning of exchangers, valves, etc.

06/14/13 – 08/07/13WACHS Energy Services, (Charlotte)Position: Field MachinistDuties: Milling inside and outside corners and flats on new transfer canal at VC Summer Nuclear Plant Units 2 and 3.Reason for leaving: Family health problems.

05/25/13 – 06/04/13PSI (Plant Services Incorporated)Position: Field MachinistDuties: Field machining on manways and flanges from 3/4”-28”Reason for leaving: End of Job

03/ 26 / 13 -- 04 / 03 / 13PSI (Plant Services Incorporated)Position: Field MachinistDuties: Field machining on scheadule 140 pipe. Cutting and beveling. Counterboring.Reason for leaving: End of job

03 / 06 / 13 -- 03 / 21 / 13Carber TestingPosition : Field MachinistDuties: Drilling and tapping studs on the CalPoly manifolds and machining manways and exchangersReason for leaving: End of job

01/28/13 – 02/21/13Furmanite/EnerstaffPosition: Field Machinist/ BolterDuties: Cutting and beveling and counter boring and on the down tubes on the new fin fans and cutting the nubbins off of the exchangers. , and bolting, torquing and tensioning of exchangers.

12/16/12 – 12/23/12Rocky Mountain PSIPosition: Field Machinist, BolterDuties: Torquing and tensioning of 3 cokers.Reason for Leaving: ROF

11/3/12 – 11/31/12SLM / FurmanitePosition: Field MachinistDuties: Set up and running of Self Leveling Machine to machine on the IP, LP and UP turbine shells.Reason for Leaving: ROF

09/14/12 – 10/11/12

Rocky Mountain PSIPosition: Field MachinistDuties: Field Machining, Refacing flangesReason for leaving: ROF

08/09/12 – 08/28/12Reimer Welding Inc. RWIPosition: MillwrightDuties: Installation of I beams. Cutting I beams and prepping I beams and structures for installation. Fitting and installation of 2" screw pipe.Reason for leaving: ROF

07/08/12 – 08/08/12Wanzek Construction. Position: MillwrightDuties: Installation of lower body of pulp press, installation of 2- 32" screw augers and pulp press ribs and enclosure. Making supports for conveyors.Reason for leaving: ROF

06/08/12 - 06/28/12Austin IndustrialPosition: MillwrightDuties: Installing blinds, alignment of pumps, torqueing flangesReason for Leaving: Quit for longer term job.

3/17/12 4/19/12Team Industrial ServicesPosition: Field MachinistDuties: Cutting and beveling pipe, flange facing and pipe isolations.Reason for Leaving: ROF

1/17/12 3/8/12Spirit ConstructionPosition: MillwrightDuties: Installing Fabio Perini converter paper machines. layout, leveling, conveyors, core machines etc.Reason for leaving: ROF

10/14/11 10/28/11Dooling MachinePosition: Field Machinist / MillwrightDuties: Refacing Flanges and alignment of pumps and motors using indicators and laser alignment.Reason for leaving: ROF

9/12/11-10/9/11Reimer Welding Inc.Position: MillwrightDuties: Assembling handrail and cat walks, stairs. Assemblling of pumps , motors, some pipe fitting and structural fitting Reason for leaving: ROF

5/07/11 5/14/11Rocky Mountain PSI / Sage EnvironmentalPosition: Field MachinistDuties: Cut out 21'' valve and machine two 23'' inch valves for replacement. Reason for leaving: ROF

3/26/11 5/04/11Pioneer IndustrialPosition: Valve Mechanic / MillwrightDuties: Disassembling and reassembling of gate valves, working on manwaysReason for leaving: ROF

2/21/11 3/12/11Team Industrial Services Tulsa,OkPosition: Field Machinist/ BolterDuties: Field Machining on wind tower bases and bolting.Reason for leaving: ROF

12/27/2010 1/08/11EA ServicesPosition: Field Machinist / BolterDuties: Field Machining and bolting on heat exchangers and reactors.Reason for leaving: Illness

11/01/10 11/08/10Pioneer IndustrialPosition: Millwright / Valves/ BolterDuties: Disassembly of valves on turbine, start up screens and reassembly of valves, torquing and of valves and inspection work on coal crushers. Draining fluids from coal crushers.Reason for leaving: ROF

10/02/10 10/30/10Team IndustrialPosition: Machinist / BolterDuties: Machining of dollar plates, channel heads and torquing and tensioning of flanges and tube sheets.Reason for leaving: ROF

9/12/10 - 9/29/10FurmanitePosition: Field MachinistDuties: Flange facing on dollar plates, tube sheets and tube bundles

8/30/2010 -9/02/10Tradesmen InternationalPosition: MillwrightDuties: Disassembly and reassembly of chain conveyors, transfer stations.Reason for leaving: ROF

4/5/10- 4/29/10Pioneer IndustriesPosition: Millwright/Field MachinistDuties; Disassembly,rebuilding, installation and reassembling of butteryfly valves and control valve. Flange facing on various size flanges.Reason for leaving; ROF

10/04/09 - 10/29/09Pioneer IndustriesPosition: Field Machinist/ MillwrightDuties: Disassembly, rebuilding , reassembling and installation of buttery valves, control valvesand arc valvesReason for leaving: ROF

8/07/09 - 8/27/09EA Services Position: Field Machinist, Bolter Duties: Torquing and Tensioning of flanges from 6" - 24" using hydraqulic Hydratight rams and Hydratorque hydraulic machines. Reason for leaving: ROF

5/06/09 - 5/18/09Wanzek ConstructionPosition: MillwrightDuties: Installation of flanges, valves, and vents. Removal, installation and adjustment of conveyors in dryer building. Also installation of support rings on holding tanks.Reason for leaving: ROF

4/20/09 - 4/28/09Ea Services Position: Field MachinistDuties: Setting up and running of split frame machines up to 32".Cutting and beveling of chrome pipe. Reason for leaving: ROF

3/2/09 - 3/21/09 EA Services Position: Field MachinistDuties: Setting up and running of split frame machines from 6" to 46" cutting and beveling of carbon stainless, stainless and chroome pipe. Setting up and running of end prep machinesand stud removal. Reason for leaving:

10/24/08 - 11/11/08Team Industrial ServicesPosition: Field MachinistDuties: Setting up and running of split frame pipe beveling machine. Also set up and running of BB5000 boring bar.Reason for Leaving: Immediate family health problems.

10/06/08 - 10/12/08Orbital Tool TechnologiesPosition: Field MachinistDuties: Set up and running of Journal Machine on a steam turbine on the hydrogen sealReason for leaving: ROF

08/08/08 - 10/01/08Conwood Tobacco PlantPosition: Line workerDuties: Packing tobacco for storing and shipping to Memphis,Tn.

06/10/08 - 07/03/08 Wanzek Construction Position: Millwright Duties: Allignment of motors, assembly and setting of 72" duct work on RTO's, bolting of cyclones to I-beams fabrication of handrail, and some pipe fitting.Reason for leaving: Moving to Tennessee

04/20/08 - 05/17/08 Blackburn Construction Position: Millwright Duties: Working on the dryer system at the Welcome Ethanol Plant in Mn. Assembly of components for augers, conveyors and other systems. Installation of guards for motors and belt drives.Reason for leaving: ROF

10/07/07 - 11/2007 Troy Fruits Posistion: Carpenter Duties: Framing housesReason for Leaving: Not enough work

07/29/07 - 08/31/07 Wanzek Construction, CVEC Ethanol Plant, Benson,Minn. Postion: Millwright/Pipefitter Duties: Setting, cutting, and fabrication of pipe,I-beams, supports and other components.Reason for leaving: ROF

04/15/07 - 07/25/07

Allan Cottrell Pelion,SC Position: Carpenter Duties: Remodling houses, tile, making countertops and cabinets, etc. Reason for leaving: Relocating to Kansas

03/28/07 - 04/02/07 T&W Valve and Machine Co., New Madrid Power Station, New Madrid, Mo. Position: Field Machinist Duties: To cut out 36,000 lb. super heater with Wachs split frame beveling machineReason for leaving: ROF

03/04/07 03/20/07Carolina Energy Solutions, North Anna Nuclear Plant, Mineral VA Position: Field Machinist Duties: Mock up on RDTs Reason for leaving: Personal

02/21/07 03/01/07 T & W Valve & Machine, Duck Creek Power Station, Canton, IL Position: Field Machinist Duties: Cut and bevel pipe with WACHS split frame and end prep machines. Reason for leaving: ROF

02/01/07 02/16/07 Carolina Energy Solutions, Rock Hill, SC Position: Field Machinist Duties: Severe and bevel pipe Reason for leaving: ROF

10/09/06 10/17/06 Patriot Tools, Comanche Peak, Glen Rose, TX Position: Field Machinist Duties: Support for EDM machine for reactor head repairs. Reason for leaving: ROF

09/25/06 10/7/06 Patriot Tools, South Texas Project, Bay City, TX Position: Field Machinist Duties: Setting up and running clamshells (variety of sizes), cutting out low pressure heaters and cutting out expansion joints inside condenser.Reason for leaving: ROF

09/18/06 09/21/06 Tri Tool Inc., Lynchburg, VAPosition: Field Machinist Duties: Training Reason for leaving: End of Training

09/05/06 09/13/06 Tri Tool Inc., Bruce Mansfield Station, Pittsburg, PA Position: Field Machinist Duties: Setting up and running header prep machines on the header Reason for leaving: ROF

08/21/06 08/25/06 Tri Tool Inc., Atlanta GA Position: Field Machinist Duties: Setting up and running 206, 212, 224 air and hydro machines also header prep and clamshellReason for leaving: finished training

05/03/06 07/20/06 Wanzek Construction, American Crystal Sugar, Hillsboro, North Dakota Position: Mechanical Millwright Duties: Uninstall, reinstall and maintenance on bearings, motors, gear boxes, installation of new belt drive conveyors,and chain drive conveyors and also checking clearances, etc.Reason for leaving: ROF

02/20/06 03/01/06 The Atlantic Group, North Anna Nuclear Plant, Mineral, Virginia Position: Scaffold Builder Duties: Building Scaffolding Reason for leaving: Personal

08/03/05 09/08/05 Stanley Jones Corp., Champion Foods, New Boston, Michigan Position: Pipe fitter/Millwright Duties: fitting pipe, installing roller conveyors,instalation of air pump stations,bolt up of flanges and other mechanical dutiesReason for leaving: ROF

03/21/05 05/05/05 The Atlantic Group, Wolf Creek Nuclear Plant, New Strawn, Kansas Position: Mechanical and Pipe fitting Duties: Worked on the reactor head, fit pipe Reason for leaving: ROF

01/28/05 02/13/05 The Atlantic Group, Brunswick Nuclear Plant, Oak Island, North Carolina Position: Mechanical Duties: Setting up pumps Reason for leaving: ROF

01/10/05 01-23-05 The Atlantic Group, H B Robinson Nuclear Plant, Hartsville, South Carolina Position: Mechanical Duties: Fitting pipe Reason for leaving: ROF

11/01/04 11/16/04 D L Ricci, Oyster Creek Nuclear Plant, Toms River, New Jersey Position: Field Machinist Duties: Setting up and tearing down of the boring machine and also running the machine itself. Boring of Main Steam Isolation Valves, disassembling and reassembling valves. Reason for leaving: ROF

10/04/04 10/29/04 Sharon Harris Nuclear Plant, Raleigh, North Carolina Position: Fitter Duties: Fitting Pipe Reason for leaving: ROF

08/02/04 10/01/04 Mustard Seed Corp., Gaston SC Position: Project Manager Duties: Overseeing multiple jobs, making sure the jobs were staffed, ordering needed materials, meeting with General Contractor, etc.Reason for leaving: Better job More Money

06/28/04 07/26/04 The Atlantic Group/Cooper Nuclear Station, Auburn, Nebraska Position: Carpenter Duties: Grading and form work, digging footings for security modification. Reason for leaving: ROF

06/02/04 - 06/24/04 Wanzek Construction/American Crystal Sugar, East Grand Forks, Minnesota Position: Millwright/Pipefitter Duties: Running 4 inch schedule 10 stainless pipe to 8 inch schedule 10 pipe for vent line. Set up and instalation of pump station, pulled wench motor and spool. Removed cable pulley. Removed alpha dryer fan and in and outer shell casing removal and instalation of augers and belt and chain drive conveyorsReason for leaving: ROF/Better

05/17/04 - 05/28/04 Wanzek Construction/ADM Enderlin, Enderlin, ND Position: Millwright Duties: Changing out chain assemblies and motor, mechanical seals, and belt drive and chain drive conveyor systems.Reason for leaving: Layoff / Transfer

04/05/04 - 05-12-04 The Atlantic Group/H. B. Robinson Nuclear Plant, Hartsville, SC Position: Mechanical

Duties: Disassembly and reassembly of Alpha Main Feed Water Pump and shaft replacement. Auxiliary Steam Feed Water Pump disassembly and reassembly. Worked with client and with Flowserve.Reason for Leaving: ROF

02/23/04 - 03/20/04 The Atlantic Group/Brunswick Nuclear Power Plant, South Port, NC Position: Brick Mason/Mechanical Duties: Demo and replacement of block wall for Moisture Seperator Reheater, Disassembling and reassembling of resin traps in radwaste.Reason for leaving: ROF

09/08/03 - 11/03/03 The Atlantic Group/Wolf Creek Nuclear Plant, New Strawn, KS Position: Scaffold Builder/Pipe/Mechanical Duties: Building and tearing down scaffolds. Pipefitting and mechanical duties associated with snubber reduction ,removing,tagging and recording of the snubbers and replacement, field testing and teardown of snubbers.Reason for leaving: ROF

7/7/03 - 9/4/03 Power Equipment Maintenance/Oconee Nuclear Plant, Seneca SC Position: Scaffold Builder Duties: Building and tearing down scaffolds and other carpentry work Reason for leaving: Voluntary Quit to go to Wolf Creek Nuclear Plant

4/10/03 - 5/27/03 Power Equipment Maintenance/Oconee Nuclear Plant, Seneca SC Position: Scaffold Builder Duties: Building and tearing down scaffolds and other carpentry work. Reasons for leaving: ROF

2/10/03 - 03/27/03 The Atlantic Group/Brunswick/ South Port, NC Position: Builder Duties: AST Mod. Chipping and sandblasting on old concrete and rebar. Building of concrete forms and

installation and teardown of concrete forms. Pouring of concrete and cleanup.Reason for leaving: ROF

2/25/02-4/48/02 The Atlantic Group/Wolf Creek, New Strawn KS Position: Carpenter/Pipe/MechanicalDuties: Building and tearing down scaffolds. Removing, tagging and recording removed snubbers and replacement, field testing also. Pipefitting and mechanical duties associated with snubber reduction crew.Reason for leaving: ROF

11/99-11/02 during non-outage times Randy Adkins, 1049 Bub Shumpert Rd, Pelion SC Position: Carpenter/Remodeling Duties: Installation and removal of tile and cabinets, framing, installation of hardwood floors, sheetrock, installing carpet, windows, doors, plumbing etc.Reason for leaving: Lack of work

3/6/01-3/22/01 Fluor Global Services/North Anna, Mineral VA Position: Carpenter Duties: Building and tearing down scaffolds. Reason for leaving: Voluntary Quit

8/23/00-11/02/00 The Atlantic Group/Wolf Creek, New Strawn KS Position: Carpenter/ Mechanical Duties: Building and tearing down scaffolds. Removing, testing, tagging and recording removed snubbers also replacement of snubbers and teardown. Pipefitting and mechanical duties associated with snubber reduction crew.Reason for leaving: ROF

4/3/00-5/3/00 Fluor Global Services/Surry, Surry VA Position: Carpenter Duties: Building and tearing down scaffolds. Reason for leaving: ROF

11/6/99-11/12/99 Fluor Daniel/International Paper, Eastover SC Position: Top Helper/Pipe Duties: Removing and installing valves in turpentine and other various lines. Also removing and installing stop plates in valves. Piping and mechanical duties.Reason for leaving: ROF

10/13/99-10/27/99 URI/Calloway Nuclear Plant, Fulton MO Position: Carpenter Duties: Building and tearing down of scaffolds. Reason for leaving: Voluntary Quit/ Wedding

8/31/99-9/17/99 Fluor Daniel/North Anna, Mineral VA Position: Carpenter Duties: Building and tearing down scaffolds. Reason for leaving: Voluntary Quit

5/10/99-8/6/99 Fluor Daniel/Monsanto, Augusta GA Position: Top Helper/Pipe Duties: Fitted structural hangers, set flashpots, ran .065 stainless pharmaceutical pipes, assembled victallic pipe, fitted and assembled fiber cast pipe and pressure tested pipe, and soldered 1/2 inch to 3 inch copper. Installation of flashpots also.Reason for leaving: Voluntary Quit (for better job)

3/2/99-4/29/99 Fluor Daniel/Wolf Creek, New Strawn KS Position: Carpenter/Pipe/Mechanical Duties: Building and tearing down scaffolds. Pipefitting and mechanical duties associated with snubber reduction crew.Replacement ,recording, tagging, removal and replacement of snubbers, Teardown and field testing also. Reason for leaving: ROF

9/1/98-10/4/98 Fluor Daniel/North Anna, Mineral VA Position: Carpenter Duties: Building and tearing down scaffolds. Reason for leaving: ROF

5/15/98-8/1/98 Fluor Daniel/G. E. Turbine Assembly Plant, Greenville SC Position: Laborer Duties: Disassembling computers, moving and setting the computers back up. Setting up cubicles for engineers and moving other office equipment.Reason for leaving: (Moved)

4/2/98-4/29/98 Fluor Daniel/North Anna, Mineral VA Position: Carpenter Duties: Building and tearing down scaffolds. Reason for leaving: ROF

1/30/98-2/19/98 Fluor Daniel/Palo Verde, Buckeye AZ Position: Carpenter Helper Duties: Building and tearing down scaffolds. Also fit up handrails. Reason for leaving: Voluntary Quit

8/21/97-11/1/97 Fluor Daniel/V. C. Summer, Jenkinsville SC Position: Carpenter Helper/Pipe/Mechanical Duties: Building and tearing down scaffolds. Remove, test and reinstall snubbers along with the installation of struts. Field testing and replacement also bench testing and tear down of snubbers. Pipefitting and mechanical duties associated with snubber reduction crew.Reason for leaving: ROF