Caterpillar® Wing StationF O R M U L T I - S T A T I O N C O N T R O L S Y S T E M ( M S C S )

Wing Station Features& Benefits

• Separate rotary throttle controlsfor each engine

• Three-position toggle switch forForward/Neutral/Reverse

• Integrated button panel

• Easy flush panel mountinginstallation

• Fully protected from sea andweather elements

• Black matte finish

Wing Station is a control panel designed for use with the Multi-Station Control System in a twin engineinstallation. It provides engine throttle control through the use of separate port and starboard rotarythrottle controls, as well as transmission control through the use of toggle switches for forward, neutral,and reverse. It also provides a button and LED panel for operator input switches of basic functions:station activation, throttle synchronization, slow vessel, trolling, and gear lockout. Wing Station providesthe same dependable anti-stall shift protection capabilities as the Multi-Station Control System.

Used in conjunction with MSCS, Wing Station provides a complete vessel control system for the engineand transmission. Its ready-to-install components easily connect to each other for “plug and run”capability. The owner has the convenience and flexibility of being able to transfer gear and throttlecontrol from one control station to another – up to eight control stations located at strategic locationsthroughout the vessel. Wing Station requires flush panel mounting and can be installed on a flat panelor in a swing-open door. It is not intended for use as a hand-held device.

LEXM4807-00 (7/04) ©2004 CaterpillarAll Rights Reserved.

C A T E R P I L L A R ® W I N G S T A T I O N F O R M S C S

Wing Station Dimensions — Part Number 255-8006

Front View Cut-Out

Side View

Environmental and Operating Power Supply RangesWing Station components are capable of withstanding the harsh marineenvironment. Wing Station is fully functional from -40°C to +85°C (-40°F to +185°F). Operating power supply range of the MSCS is between 9 and 36 volts DC.The nominal system voltage is 12V or 24V DC with reverse polarity protection.

6.706.66

0.16 TYP.4.834.79

6.36

RO .25 MAX. TYP.

0.15

4.49HOLES FOR #4

SCREWS 4 PL’S

24.0018.00

(6.25)

(1.56)