CATCHES & LATCHES - techford.com · catches & latches push knob latches catches (tension, roller,...
Transcript of CATCHES & LATCHES - techford.com · catches & latches push knob latches catches (tension, roller,...
CATCHES & LATCHES
PUSH KNOB LATCHES
CATCHES(TENSION, ROLLER, KNUCKLE,etc.)
DRAW LATCHES / SLAM LATCHES SLIDE BOLT / BAR LATCHES HASPS
20120501
56
Catch
es & L
atches
KNUCKLE CATCHES NON MAGNETIC MINI CATCHES
Picture Item Name Push in / Pulling Force (kgf) Page
1-555-2 29 - 57 / 18 - 44 60
NAC 3.1 / 2.7 60
RCU 3.0 / 3.2 60
JC-24,JC-262.2 - 3.1 / 1.7 - 2.7
61
JCU 2.0 / 2.3 61
JCU-F (SNAP-IN)
2 / 2 61
JC-T50 3.3 / 3.8 61
Picture Item Name Retaining Force (kgf) Page
PR-21P 10 64
PR-20P - 64
NS2 1 64
PR-4PK 1.2 65
PR-3PK - 65
ESN-195 3.5 65
Picture Item Name Retaining Force (kgf) Page
MC-28 3 66
MC-37 8 66
Picture Item Name Push in / Pulling Force (kgf) Page
RC6900, RC69011.1 - 2.2 / 1.6 - 3.2
60
STBRC 1.0 / 2.7 63
Picture Item Name Retaining Force (kgf) Page
LL-66S 20 67
LL-66 20 67
Picture Item Name Push in / Pulling Force (kgf) Page
BCTS2.0 - 5.7 /1.3 - 3.9
62
BCT4.1 - 4.6 /3.0 - 3.5
62
BCU3.6 - 4.1 /2.4 - 3.9
63
BCT-60W 3.2 / 2.7 63
LEVER LATCHESBALL CATCHES
NON MAGNETIC CATCHESROTARY/ROLLER CATCHES
20120501
57C
atches &
Latch
es
Picture Item Name Page
SSG 74
BLL 75
BLT 75
SSL 76
HP-AK 76
HP 77
HP-635, 645, 660 77
HP-635S, 645S , 660S 77
BAR LATCHES / HASPS
Picture Item Name Page
FL2 68
FL4 68
B-KR 69
KR-50 69
PRS-40 69
KR65 70
KR75 70
HR35 70
BL-40S,BL-60S 71
BLS 71
BL-40, BL-60 72
BS 72
BSS2/BSS3 73
BSS 73
BS-SL 74
SLIDE / BARREL BOLTS
20120501
58
Catch
es & L
atches
P100 86
P3-12, P3-11 86
PS, P 86
PS35 86
P34 87
P11 87
P8 87
P91 87
THF-100 88
THF-75 88
PN-51 89
P-1040/SS 89
P-102H/SS 89
Picture Item Name Page
Picture Item Name Retaining Force (kgf) Page
251F, 151F 25 90
252F, 152F 15 91
255F, 155F 15 92
149 SERIES - 93
PUSH LOCK FASTENERS
FASTENERS
Picture Item Name Page
STF-100 78
STF-82L 78
STF-80 79
STF-40 79
CHN 79
STF-CV150 80
TF40C 80
STF-C64A, B 81
STH-C64 82
STF-A56AH, AC 82
SCC-60 83
SCC-40 83
SCC-30 83
SCCA-60 84
SCCA-40 84
PS34A 84
PS 85
P3 85
P3-10N 85
20120501
59C
atches &
Latch
es
Picture Item Name Page
LC-65A 94
LC-48 94
WB-900418, WB-900408 95
P10 95
ATL-64 95
LJ-61 96
SX-48 98
LC-PK32-L 98
LC-PK32-K 99
FLUSH SLAM LATCHES
Picture Item Name Page
LH-203 94
WB-901503, WB-901504 96
WB-901551, WB-901552 96
HANDLE LATCHES
Picture Item Name Page
DC 97
DAMPER CATCHES
Picture Item Name Page
HC-30R 100
HC-30 100
HC-30H 101
HC-70 101
HC-70H 102
HC-30L 102
HC-30HL 103
HC-65 103
HHC-85 104
HC-85SS 104
SLIDING DOOR LATCHES
20120501
60
Catch
es & L
atches
1-555-2ADJUSTABLE KNUCKLE CATCH
• Grabs and holds doors tightly.• Strong catch force.• Catch force is adjustable by turning adjustment screw.
2-φMアナ φmサラ
L Q
I JF
G
H
N P
SC
A B D
R
K
2-φEアナ φeサラ
57.541.9
6
40
7
52.367
25.5
3232
25.5
8 ~ 20kgf78.4 ~ 196N
8 ~ 20kgf78.4 ~ 196N
127.4 ~ 254.8N 13 ~ 26kgf
127.4 ~ 254.8N
42g
Pulling ForceColor
Black
Ivory
Material
Polyamide
Polyamide
Item Name
1-555-2B
1-555-2I
Item Code
140-059-516
140-050-120
Push in Force Weight
42g13 ~ 26kgf
KNUCKLE CATCH NAC
• Grabs and holds doors tightly.
D-22-P202
使用例
DNACI1A
■Installation
No.①②
Material ColorPolyacetal NaturalPolyamide Natural
Item Code
140-051-013
Item Name Push in Force
NAC 5.7kgf 1,000pcs
Pulling Force CartonWeight Box
7.1kgf 4.5g 100pcs55.8N 69.5N
15
2-3.2 × 7
2-3.2 × 6
1 22.8
167.5
11.5
30.5
13 1035
.42326.5
34.5
2.8
D-34-202DNACD1A
RCUROTARY CATCH (MORTISE TYPE)
• Mortise catch for overlay doors.
53 64
2-φ3 φ5.5
2-φ3 φ6
1624
9
22.5 4.5
33
18
3
310
3
2
1
DRCUD1A
Item Code
140-051-014
Item Name Push in Force Pulling Force CartonWeight
RCU 29.4N 31.4N 8g 800pcs
Box
100pcs3.0kgf 3.2kgf
No. Material Color ① Polyacetal Natural
② Polyethylene Natural
③ Polyacetal Natural
■Installation
ROTARY CATCH RC6900, RC6901
D - 17 - 200 DRC6I1A
D-18-200
DRC6I1B
■Installation
1 2 3
PA P2 GE
I D F
B J
P1 H
CDoor
2-φd1
2-d
D-30-200DRC6D1A
• Grabs and holds doors tightly.
No. Material Color① Polyacetal Natural
② Polyethylene Natural
③ Polyacetal Natural
Push in ForceItem Name
RC6900 10.8N 15.7N
RC6901 21.6N 31.4N
1.1kgf
2.2kgf
Pulling Force
1.6kgf
3.2kgf
Item Name A B CartonC
RC6900 29 12 21.2 2,000pcs
D E F P1 G H I
11.3 8 2 6 26 13.5 7.5
J P2 d d1 Weight Box
1.7 20 3.1×7 3 3g 100pcs
RC6901 31.3 14 27.2 12.6 9 2.3 7.5 32 16.5 9 2 23.6 3.1×7 3.1 4g 100pcs 2,000pcs
P
21.5
24.4
Item Code
140-050-209
140-051-015
20120501
61C
atches &
Latch
es
• Mortise catch for overlay doors.
No.①②
MaterialPolyacetalPolyamide
ColorNatural/BlackNatural/Black
Part NameCatchStrike
KNUCKLE CATCH
KNUCKLE CATCH (MORTISE TYPE)
JC-24,JC-26
JC-24
JC-26
JC-24B
Item Name A P1 C
2,000pcs
D E F P2 J K L d1 d2 Push in Force Pulling Force Weight BoxGItem Code
3.1kgf
2.2kgf
3.1kgf
140-050-046
140-916-119
140-051-018
22
24.5
22
100pcs
100pcs
100pcs
1.5g
2g
1.5g
26.5N
16.7N
26.5N
30.4N
21.6N
30.4N
2.5
3.3
2.5
2.5×5.5
3.3×6
2.5×5.5
2
2.5
2
12.5
12.5
12.5
7.5
7.5
7.5
15.5
17
15.5
12
12
12
7
6
7
7.5
7.5
7.5
Carton
5,000pcs
2,000pcs
21.5
21.5
21.5
17
18
17
24
26
24
2.7kgf
1.7kgf
2.7kgf
JC-24
JC-26
JC-24B
A P1
F 2.5
E K
C
Door
P2
DL
P2J
2-φd2
2-d1
1 2
D-32-201DJC2D1A
G
• Grabs and holds doors tightly.
D - 20 - 201DJC2I1A
■Installation
No. Material Color① Polyacetal Natural
② Polyamide Natural
Part NameCatchStrike
13.5
26186
13
3829.5
18
11.5
12
2
11.52
DJCUD1A
2-φ3.3 φ5.8 2-φ3.3 φ5.5
13.5
26186
13
3829.5
18
11.5
12
2
11.52
DJCUD1A
2-φ3.3 φ5.8 2-φ3.3 φ5.5
DJCUI1AD - 21 - 201
■Installation
SNAP-IN KNUCKLE CATCH JCU-F
JCU
jcufd03.eps
■Installation
Pulling ForceItem Name Push in Force
JCU-F 19.6N 19.6N2.0kgf 2.0kgf
Item Code
140-051-112
Carton
800pcs
Weight
5.2g
Box
40pcs
L
H
jcufd02.eps
jcufd01.eps
2.5
18.7 2
32 432515
310
11
10
2-φ3.4、φ6.5
3
21
1.5
• Grabs and holds doors tightly.• Snap-in type body for easy installation.• Designed for sheet metal or plastic panel applications.• Internal catch body slides 1.5mm for better alignment.
No.①②③
MaterialPolyacetalPolyacetalPolyamide
Color NaturalNaturalNatural
H
32.3mm
32.9mm
33.8mm
L Sheet metal thickness
0.8mm
1.0mm
1.2mm
10.1mm
10.1mm
10.1mm
KNUCKLE CATCH JC-T50
Item Code Item Name Push in Force Pulling Force Weight Box Carton140-019-545 JC-T50 3.3kgf 3.8kgf 9g 50pcs 500pcs
Part Name Material ColorCatch Polyacetal WhiteStrike Polyamide Natural White
Item Name Push in Force Pulling ForceItem Code CartonWeight Box
JCU 19.6N 22.5N140-051-020 2.0kgf 2.3kgf 3.5g 1,000pcs50pcs
20120501
Catch
es & L
atches
62
• 316 stainless steel catch for harsh environments.
• Catch force is not adjustable.
Item Name
BCTS-70
BCTS-40
BCTS-50
A
70
B R SC
43 35 8 6 13.5
D E e F G H I
5.9 3.2 6.2 28.4 7.5 2.5 25
60 13 13 4.2 8.2 51 13 4 42 10.5 23
Q
2.7
8
J K L M m N
16 7.5 4.5 3.2 6.2 8.5
50 40 10 7.5 4.2 8.2 31.5 9.3 2.9 30 20 9 6 4.2 8.2 10.3 3.8 7.7 16.1
30 10.5 10 4.2 8.2 15
P
2.5
2.9
4
Material Finish
Stainless Steel(SCS14) Polished
CartonBoxItem Name WeightPush in Force Pulling ForceItem Code
140-050-242
140-050-241
140-050-240
1.3kgf
1.8kgf
3.9kgf
13N
18N
38N
20N
23N
56N
2kgf
2.3kgf
5.7kgf
18g
30g
83g
BCTS-40
BCTS-50
BCTS-70
50pcs
50pcs
25pcs
500pcs
500pcs
250pcs ※SCC14 is similar to SUS316
STAINLESS STEEL TENSION CATCH BCTS
B04_BBCTD1A.EPSFA B
D
SG H
C
R
NP
L Q
I J
K
2-φM, φm
2-φE, φe
BCTS-70
BCTS-40BCTS-50
TENSION CATCH BCT
Finish
Chrome
Chrome
Chrome
Item Code
140-050-108
140-050-107
140-050-106
Item Name
BCT-70
Carton
BCT-40 400pcs
Weight Box
16g 100pcs
70g 50pcs 200pcs
BCT-50 26g 100pcs 400pcs
Push in Force
45.1N
Material
43.1N Zinc Alloy
40.2N
Pulling Force
29.4N
34.3N
32.3N
4.6kgf
4.4kgf
4.1kgf
3.0kgf
3.3kgf
3.5kgf
Zinc Alloy
Zinc Alloy
D FBA
C HGS
K N P
I J L Q
2-φE φe
2-φM φm
DBCTD1A
R
BCT-70
BCT-50BCT-40
• Catch force is not adjustable.
Item Name
BCT-70
BCT-40
BCT-50
R
6.5
11
7.4
A
70
B Q SC
42.5 35 8 3.7 14
D E e F G H I
6.3 3.2 6.2 26.7 7.5 2.5 25
60 13.5 12 4.2 8.2 49 13 4 42 8.2 21.2
P
2.5
3
J K L M m N
16 7.5 5.5 3.2 6.2 8.8
50 40 10 8.4 4.2 8.2 29.8 9.5 3 30 20 9 7.3 4.2 8.2 9.8 2.5 4.7 16
30 10.5 11 4.2 8.2 14.2
20120501
Catch
es & L
atches
63
• Catch force is not adjustable.
TENSION CATCH BCU
Item Name
BCU-40
BCU-70
Item Code
140-050-103
140-050-104
CartonFinish Weight Box
400pcsChrome 18g 100pcs
75g 50pcs 200pcs
Material
Zinc Alloy
Push in Force Pulling Force
23.5N
38.2N
35.3N
40.2N
2.4kgf3.6kgf
4.1kgf 3.9kgf Zinc Alloy Chrome
Item Name
BCU-40
BCU-70
A P1 QC
28.5 20 12.5 15.7
D E F G H I P2
8.3 6.5 R4 M3 5 24 16
Y
6.2
K L N P T X
8 9 5 3 3 3.2
48 34 20.5 13.5 12.7 R6.5 M5 6 42 32 11 13 10 7.3 4 4.2 8.2 24.9
DBCUD1A
P2P 1
2-φX φY
PA NI
E
L TKQCD
F
recommended screw size H2-G Screw
BCU-70
BCU-40
TENSION CATCH BCT-60W
Zinc Alloy
Finish
Chrome
MaterialPush in Force Pulling Force
31.4N 26.5N3.2kgf
Carton
320pcs
Weight Box
39.5g 80pcs2.7kgf
Item Code
140-059-035
Item Name
BCT-60W
• Double catch for dual doors that meet in the center.
24
2.5
364958
3
7.57.5
2416 5 3
13.3
3-φ4.2, φ8
2-φ3.2, φ6
16
10.5
DBCTD2A
STAINLESS STEEL ROLLER CATCH STBRC
No. Part Name Material Finish
① Body304 Stainless Steel
Plain② Strike
③ Spring
④ Rivet 430 Stainless Steel
⑤ Roller Polyethylene White
Item Code Item Name Push in Force Pulling Force Weight Box Carton140-098-005 STBRC 1.0kgf 2.7kgf 18g 60pcs 1,200pcs
20120501
Catch
es & L
atches
64
NON-MAGNETIC TOUCH LATCH PR-21P
No.①
⑤
②
MaterialABS
Polyacetal
Steel
Finish/Color Black、Brown Black、Brown
Chrome
③ Steel Paint/Brown ④
Part NameBody
Strike
SlideArmYoke Steel GB
800pcs100pcs16.3g
Carton
800pcs
Item Name
PR-21PK
Color
Black
PR-21PD Brown
100pcs
Weight
16.3g
BoxItem Code
140-050-277
140-050-272
1
4
3
( 2)
5.5
2-φ3.2φ6.4 depth2
2-3.2×5 6.4×8.2 depth2
4334
165
12
16
73.
51
2-φ33729
20
(10) (Lock Stroke)
3 (Latch Release Stroke)
26.5
4.52
(13)
( 1.3
)
Stroke7.5
2618
5.5
8.4
7.6
17.8
5
2
73.
51
2-φ3 2-φ3.2φ6.4 depth2
Stroke7.5
2
(10) (Lock Stroke)
3 (Latch Release Stroke)
2-3.2×5 6.4×8.2 depth2
43±0.234
±0.
216
5
1216
2618
5.5 8.
47.
6
17.8
3729
20
26.5
4.5
(13.5)
( 23)
( 2)
5.5
1
4
3
2
5
NON-MAGNETIC TOUCH LATCH PR-20P
• Push to latch / unlatch.• Strong retaining force.
• Push to latch / unlatch.• Strong retaining force.
NON-MAGNETIC MINI TOUCH LATCH NS2
• Push to latch / unlatch.• Miniature design is ideal for small applications.
NS Latch
strike plate Door
3.4min.8
2.5
T(Door
Thickness)
MAX. 2T
min.8
3.4
min.2
(12.9)
7
9
15
6.5 1.8
10.3
12
7.5+0.1-0
9
R0.2~R0.5適応板厚2mm
R不可 +0.1
+0-0.2
解除ストローク1.2
3.4 ストローク 4.6
スライド
2.7
6.27.5
2–C1.5
strike plate(1)
3.4min.8
2.5
T(Door
Thickness)
MAX. 2T
min.8
3.4
min.2
(12.9)
7
9
15
6.5 1.8
10.3
12
7.5+0.1-0
9
R0.2~R0.5適応板厚2mm
R不可 +0.1
+0-0.2
解除ストローク1.2
3.4 ストローク 4.6
スライド
2.7
6.27.5
2–C1.5
strike plate(2)
3.48以上
2.5T(扉厚
) 以下2
T
8以上
3.4
2以上
(12.9)
7
9
15
6.5 1.8
10.3
12
7.5+0.1-0
9
R0.2~R0.5
+0.1
+0-0.2
Latch Release Stroke1.2
3.4 Stroke 4.6
Slide
2.7
6.27.5
2–C1.5
90 °Bore
DimensionsItem Code Item Name Material Door Tickness Color Weight Box140-059-098 NS2 Polycarbonate 2 Black 1.1g 500pcs
No. Part Name Material Finish/Color① Body ABS Plastic Black,Brown
② Slide Polyacetal Black,Brown
③ Arm Steel Paint/Brown
④ Yoke Steel Bronze
⑤ Strike Steel Chrome
Item Code Item Name Color Weight Box Carton140-050-276 PR-20PK Black 16.3g 100pcs 800pcs140-050-274 PR-20PD Brown 16.3g 100pcs 800pcs
20120501
Catch
es & L
atches
65
NON-MAGNETIC MINI TOUCH LATCH PR4PK
• Push to latch / unlatch.• Miniature design is ideal for small applications.• Strike sold separately.
(15)(5)12
2
10.9
8
3.4
4.8(Stroke)1.5(Latch Release Stroke)
7
7
8
2
2.55.2
2.71
4
R1R1
35.
2
Strike head details
Cut out dimensions
12
( 14)
Strike for wood(1)
2-2.6、5.6
7.72 7
14 21
B2-036-dr01.eps 背景なし
2
8
7111.5
10
9
Strike for metal(2)
Strike for wood(1)
(Option)
Strike for metal(2)
(Option)
■Body
Item Name Material
PR4PK-1 Polyacetal
Item Code
140-059-019
■Strike plates
PR4PK-2 Polyacetal140-059-018
Item Code Item Name Retaining Force Door Tickness Weight Box140-050-118 PR4PK-B 12N 1.2kgf 2 0.7g 1,000pcs
No. Part Name Material Color ① Body Polyacetal Black
② Arms Polyamide Black
NON-MAGNETIC TOUCH LATCH PR3PK
• Push to latch / unlatch.• Thin design is ideal for tight spaces.
B25 下
7.55
5.52.55.
5 3.5
Strike head details
2122.5(7)
1.5
17(
19)
(14)
20
(3.4)(2.6)(1.5)(Latch Release Stroke)
(5.5)(Stroke) 7.4
3.6
7.5
8.5
17
Cut Out Dimensions
2-R0.5B25 下
7.55
5.52.55.
5 3.5
Strike head details
2122.5(7)
1.5
17(
19)
(14)
20
(3.4)(2.6)(1.5)(Latch Release Stroke)
(5.5)(Stroke) 7.4
3.6
7.5
8.5
17
Cut Out Dimensions
2-R0.5
NON-MAGNETIC MINI TOUCH LATCH ESN-195
No. Part Name Material Finish/Color① Body Polyacetal
Black② Catch Polyamide
③ Spring Steel Chromate
Item Code Item Name Retaining Force Weight Box 140-059-195 ESN-195 3.5kgf 2.3g 5,000pcs
Item Code Item Name Material140-014-075 ESN-195-1 Polyacetal
Item Code Item Name Material Color Weight Box140-050-239 PR3PK ABS Black 2.5g 400pcs
■Strike plate
ESN-195 / STRIKE1(Strike for wood)
Cut Out Dimensions
• Push to latch / unlatch.• Strong retaining force.• Miniature design is ideal for small applications.• Strike sold separately.
20120501
Catch
es & L
atches
66
NON-MAGNETIC TOUCH LATCH MC-28
• Push to latch / unlatch.• Touch latch with floating strike allows for easy alignment.• Note: For overlay door, allow 3mm gap
between door and cabinet frame for push space. Pulling door with excessive force without unlatching the unit may damage the mechanism. Constant loading of over 3kgf or excessive pushing or pulling is not recommended.
37
36
(9)
12.24.6
20.5
2222
16 (18)
3
4
106.
6 9.2
13.2
3
36.3
4-3 × 65 × 8 Counter bore depth 2.2
φ2.7 φ5.4
3.613.2
φ3.6
4
3kgf
Retaining Force
29N
ColorMaterial Weight Box Carton
BlackABS 15g 50pcs 500pcsMC-28
Item Name Item Code
140-059-203
NON-MAGNETIC TOUCH LATCH MC-37F
3324 20
4216
23.5
3240
18
23.5 19.5
57 14
10
6.5
16
1 2 3 2-3.6 × 5.6、6.6 × 8.6
R 5
6.2 × 9.2 Counter bore depth 22-3.3 × 6.3
2-φ3.3φ6.2 Counter bore depth 2
B2-035-dr01-1.eps 背景なしB2-035-dr02_3.eps 背景なし
Lock stroke:3
Door
9
8
Retaining Force
78N
78N
78N
Color Weight Box Carton
MC-37F-BK Black 24g 30pcs 300pcs
MC-37F-BR Brown 24g 30pcs 300pcs
MC-37F-WH White 24g 30pcs 300pcs
8kgf
8kgf
8kgf
Item Name Item Code
140-058-064
140-058-066
140-058-065
Black、Brown、WhiteBlack、Brown、WhiteBlack、Brown、White
MaterialABS
PolyacetalPolyamide
ColorPart NameBodyArm
Strike
No.①②③
• Push to latch / unlatch.• StrongRetaining Force.• Floating strike allows for easy alignment.• Note : For overlay door, allow 3mm gap
between door and cabinet frame for push space. Pulling the door with excessive force without unlatching the unit may damage the mechanism. Constant loading of over 4kgf or excessive pushing or pulling is not recommended.
20120501
Catch
es & L
atches
67
STAINLESS STEEL LEVER LATCH LL-66S
SUS316 PAT
9.8
6.5
(26)(51.6)
5666
2-φ4.2
(21)
3545
(28)
18.5
1710
4.2 × 7.2
2-4.5 × 7.2
1
3
2
4
ll66d06.eps
MirrorNo.①②③④
Part NameLatch Body
LeverShaftStrike
MaterialStainless Steel(SCS14)Stainless Steel(SCS14)Stainless Steel(SUS316)Stainless Steel(SUS316)
Finish
MirrorPlainMirror
(Cabinetbottom)
Backsideof door
Strike
Latch Body
ll66d07.eps
Lever
Bottom BoardDoor
min.34
Latc
hing
5.2
ll66d08.eps
23
3.5
Material Retaining Force BoxItem Name Item Code140-051-030 LL-66S
Weight
Stainless Steel (SCS14) 196N 20kgf 85g 20pcs 100pcs
Carton
※SCS14 is similar to SUS316
• Latch designed to be used on a door without knobs or handles.
• 316 Stainless steel construction makes it ideal for harsh and high corrosive environments.
LEVER LATCH LL-66
• Latch designed to be used on a door without knobs or handles.
• LL-66 GR is flame resistance as per UL94V-O.
(16)(24.5)
4.2 × 7.2
495666
1218
.522
6.5
2030
107 17
4.2 × 7.2
10.6
DLL6D1A
1
2
3
4
LL-66BR LL-66WT
LL-66GR(Flame resistant)
D-40-P1-37
Latch Body
Strike
CabinetBottom
Backsideof door
DLL6I1C
min.22
Latch
ing6.5
Door
DLL6D1B
Bottom BoardGap 0.5~1
No.①
④
②③
Part Name Material Finish/ColorLatch Body Polyamide White、 Brown、 Gray
Strike Steel Nickel
Lever Polyamide White、 Brown、 GrayShaft Steel Yellow Zinc Chromate
Color
Brown
Grey
White
Item Code
140-051-028
140-051-027
140-051-029
196N
Item Name Spec. Box Carton
LL-66BR ー 30pcs 300pcs
LL-66GR Flame resistant 30pcs 300pcs
LL-66WT ー 30pcs 300pcs
Retaining Force Weight
25g
25g
25g
20kgf
196N 20kgf
196N 20kgf
20120501
Catch
es & L
atches
68
FL4SLIDE BOLT
SLIDE BOLT FL2
• Flat and compact design.• Knob will be latched in open and closed position.• 2 different counterplates included for different mountings.
• Flat and compact design.• Knob will be latched in open and closed position.• 2 different counterplates included for different mountings.
fl23d01.eps
8 18 24
8.25.313.5
P
φ9L
3
D D
2418
241210
.53
5.2
6
188
2419
653
0.8
2
11 5
C 2-φ3.2
2-φ3.2 2-φ3.2
15
12
Item Name
FL2-35
FL2-55
Item Code
140-180-136
140-180-137
Material
Stainless Steel(SUS304)
Finish
Satin
Weight Box Carton
300pcs
300pcs
30pcs
30pcs
28g
39g
P C D
21 11.5
40 20
L
35
55 SatinStainless Steel(SUS304)
fl43d01.eps
4-φ3.2
2-φ3.22-φ3.2
83
75.3
21 32
12.3 LP
18 156
5.2 0.8
2
5
C
E D
1111
21 32 21 32
φ7
FL4-55L
FL4-55
FL4-35
15
12
47gSatin15
12FL4-35
FL4-55
140-180-863
140-180-864
Stainless Steel(SUS304) Satin 300pcs
300pcs
30pcs
30pcs
32g23 11.5
38 20
35
55 Stainless Steel(SUS304)
15
E
47gSatin25FL4-55L140-012-131 300pcs30pcs38 2055 Stainless Steel(SUS304)
Item Name Item Code Material Finish Weight Box CartonP C DL
20120501
Catch
es & L
atches
69
SLIDE BOLT KR-50
PUSH BARREL BOLT PRS-40
SLIDE BOLT B-KR
• Tab style knob provides an easy grip.• 2 counterplates included for different mountings.
• Simply push black knob to latch and push front button to release.
• Knurled knob provides easy grip.• 2 counterplates included for different mountings.
Material Finish304 Stainless Steel Satin
Item Code Item Name Weight Box Carton140-913-942 KR-50 80g 20pcs 200pcs
Material FinishBrass Satin Nickel
Item Code Item Name L B H C1 C2 P1 P2 P3 P4 Weight Box Carton140-054-048 B-KR-35 36 29 18 11 16 26.5 19 20 21 60g 20pcs 200pcs140-059-040 B-KR-45 45 30 18.5 12.5 17 33 20 22.5 21.5 80g 10pcs 200pcs
B2-057-dr02_3.eps背景なし
Door
Stroke(9)
(1.9)
26.8
4.67.525
7
13.3
9
10
3424.5
15.6
0.8
18
3626.8
670.8
φ7
15.6
36
403 2
1φ7.8
2-4.4 × 3
4-φ32-4.4 × 3
Push to lock
Push to unlock
B2-057-dr01-1.eps 背景なし
Item Code
140-049-402
Item Name Weight
PRS-40 55g
Part Name Material FinishBody Stainless Steel(SUS304) Satin
Bar Stainless Steel(SUS303) SatinStrike Stainless Steel(SUS304) Satin
No.①②③
20120501
Catch
es & L
atches
70
SLIDE BOLT KR65
SLIDE BOLT KR75
LEVER BOLT HR35
• Rounded tab prevents snagging.• 2 counterplates included for different mountings.
• Wing tab provides an easy grip.• 2 counterplates included for different mountings.
• Large knob allows for easy operation.• 2 different counterplates included for different
mountings.
45 10
2 -φ3.8、φ6.6
65 19.5
23.51.5
421
18 34 44
6.5
8.5
17.5 30
44 32 21 31 42
7.5
17.5
4 -φ3.8、φ6.6 10
1.5
3
2 -φ3.8 φ6.6
1 2
B35CD
Box
10pcs
Item Code
140-054-050
Item Name Weight
KR65 125g
No. Part Name Material Finish
③ StrikeB
① Body Stainless Steel(SUS304) Polished
② StrikeA Stainless Steel(SUS304) PolishedStainless Steel(SUS304) Polished
56 9.57575
1.5 22
20 38 48
1.518
16 38 4818 30
48 40
1.5
20
108
7.52 -φ3.8 φ6.6
4 -φ3.8 φ6.6
2 -φ3.8 φ6.6
21 3
B35EF
20
No. Part Name Material Finish
③ StrikeB
① Body Stainless Steel(SUS304) Satin
② StrikeA Item Name Weight
KR75 225g
Box
10pcs
Item Code
140-059-042Stainless Steel(SUS304) SatinStainless Steel(SUS304) Satin
■Spacer HR35SP-B(Option)
4 – φ4
2 – φ4
14.5
202 – φ4
202.51
24.79.7
6.5
2
12.2
21
9.5
35
120˚
35
25 46 60
B04_BHR3D1A.EPS
29 2946 60 46 60
10.84.5
8
4–φ4.62
6046
3521
B04_BHR3D2A.EPSSpacer
Spacer
Spec.
Latch
HR35SP-B 250pcsPolyamide Black 5g 2,500pcs
Item Name Material Finish
HR35 Stainless Steel(SUS304) Satin
Weight Box Carton
108g 10pcs 100pcs
140-180-002
Item Code
140-180-135
20120501
Catch
es & L
atches
71
SPRING LOADED BARREL BOLT BL-40S,BL-60S
SPRING LOADED BARREL BOLT BLS
• Knob springs back into sleeve to keep bolt in locked or unlocked position.
• 2 counterplates included for different mountings.
• Knob springs back into sleeve to keep bolt in locked or unlocked position.
• 2 counterplates included for different mountings.
P3P2
P1
LL1 H2
30
4.9
φ9
42
14
B
DD
H1
18
(40.5)
1
2-φ4
6-φ4
OBLSD1AL-74-792
1
4
3
P
5
23
4
1
BLS-90
BLS-60
No.①②③④⑤
Part Name Material FinishBody Stainless Steel(SUS304) SatinStrike Stainless Steel(SUS304) SatinBar Stainless Steel(SUS303) −
Knob Stainless Steel(SUS303) −Strike Stainless Steel(SUS304) Satin
D
17
24
Item Name
BLS-60
BLS-90
L
60
90
L1
25.4
25.4
H1
20
20
H2
20.4
20.4
B
33
33
P
20
20
P1
12.7
12.7
P2
10
12.5
P3
40
65
Weight
109g
147g
Box
20pcs
15pcs
Carton
200pcs
150pcs
Item Code
140-052-000
140-052-001
6-φ3.5
P2P1
L10
D
10
14
3.2
φ6
13
242333
(26.5)
P26 PBLSD0A.EPS
2-φ3.5
20.3
0.8
5
4
32
1
Part Name Material FinishBody Stainless Steel(SUS304) SatinStrike Stainless Steel(SUS304) SatinBar Stainless Steel(SUS303) Plain
Strike Stainless Steel(SUS304) Satin
No.①②③
⑤④ Knob Stainless Steel(SUS303) Plain
Item Name L P1 P2 D Weight Box Carton
BL-40S 40 7.5 25 11 36g 30pcs 450pcs
BL-60S 60 10 40 15 50g 30pcs 450pcs
Item Code
140-050-245
140-050-246
BL-60S
BL-40S
20120501
Catch
es & L
atches
72
BARREL BOLT BL-40, BL-60
BARREL BOLT BS
Part Name Material FinishBody and Plates 304 Stainless Steel SatinBolt and Knob Brass Nickel
Item Code Item Name L P1 P2 D Weight Box Carton140-050-247 BL-40 40 7.5 25 11 36g 30pcs 450pcs140-051-053 BL-60 60 10 40 15 50g 30pcs 450pcs
Part Name Material FinishBody and Plates 304 Stainless Steel SatinBolt and Knob Brass Nickel
Item Code Item Name L L1 H B C1 C2 C3 C4 C5 D Weight Box Carton140-051-050 BS-90 90 36 16.5 27 16 15 14.5 58 - 24 85g 30pcs 300pcs140-051-051 BS-150 150 36 16.5 27 16 15 25 100 - 24 125g 20pcs 200pcs140-051-052 BS-240 240 36 16.5 27 16 15 18.5 192 71 30 190g 10pcs 100pcs
BS-240
BS-90
Installation
BS-240
� •��2�counterplates�included�for�different�mountings.
•��Knob�springs�back�into�sleeve�to�keep�bolt�in locked�or�unlocked�position.
•��2�counterplates�included�for�different�mountings.
BL-60
BL-40
20120501
Catch
es & L
atches
73
SPRING LOADED BARREL BOLT BSS2,BSS3
SPRING LOADED BARREL BOLT BSS
•��Knob�springs�back�into�sleeve�to�keep�bolt�in �locked�or�unlocked�position.•��Extra�sleeve�for�locking�offers�flexibility�in�application.�•��Designed�for�applications�where�a�longer�throw�is�
needed. •��2�counterplates�included�for�different�mountings.
•��Knob�springs�back�into�sleeve�to�keep�bolt�in locked�or�unlocked�position.
•��2�counterplates�included�for�different�mountings.
bss#d01.eps
(40.5)2033
20.5
φ9
4
4-φ4
D2D
1LP2
P1
4.7
14
2-φ41
3042
18
5
3
2-φ4
3320
30
13 20
6-φ4BSS2
φ9
D2
D3
D1
60
LP 2P1
(40.5)20
4.7
14
20.533
2
1
BSS3
Part Name Material FinishBody Stainless Steel(SUS304) SatinStrike Stainless Steel(SUS304) SatinBar Stainless Steel(SUS303) −
Strike Stainless Steel(SUS304) Satin
No.①②③
⑤④ Knob Stainless Steel(SUS303) −
140-050-042
140-050-041
140-050-043
Item Code Item Name Weight Box Carton
BSS2-90 140g 15pcs 150pcs
BSS2-150 212g 10pcs 100pcs
BSS3-240 320g 6pcs 60pcs
L
90
150
240
P1
13
15
15
D1
21
30
30
D2
42
60
60
D3
ーー90
P2
60
115
205
BSS-240
BSS-90
No.①②③
⑤④
Part NameBodyStrikeBar
StrikeKnob
MaterialStainless Steel(SUS304)Stainless Steel(SUS304)Stainless Steel(SUS303)
Stainless Steel(SUS304)Stainless Steel(SUS303)
FinishSatinSatin
−
Satin−
Item Name L L1 P1 P3 P4 P5 D Weight Box Carton
BSS-90 90 30 20.5 13 60 − 24 142g 15pcs 150pcs
BSS-150 150 30 20.5 15 115 − 32 215g 10pcs 100pcs
BSS-240 240 30 20.5 15 205 60 32 330g 6pcs 60pcs
P2
13
13
13
Item Code
140-052-002
140-052-003
140-052-004
L 305 P791OBSSD1A
18DL 1
(40.5)
4230
1
φ9
14204.
7
2-φ4
2-φ4
6-φ4
P4P5
P3P2
L
33P1
20
5
3
4 1
2
20120501
Catch
es & L
atches
74
Material Finish
Stainless Steel(SUS304) Polished
1.53.05.263522481782138111012342642SSG-85 5pcs 60pcs85 46 400g
1.52.55.95.9281840144143010109292033SSG-65 10pcs 100pcs65 40 175g
t2
1.2
t1
2.0
d2
4.8
d1
4.8
S
22
R
15
Q
32
M
8
L
2
K
11
J
22
H3
7.5
35.5
29
H2
20.5
28
21.5
H1
16
G
7
F
6
E
21
D
14
C
26
Item Name Box Carton
SSG-45 20pcs 240pcs
A B Weight
45 28 65g
140-179-391
140-059-178
140-059-177
Item Code
H1
H3
G
B
AE
M
SQ
R
LD
F
KC
J
t1
t2
H2
4-φd12-φd1
2-φd2
GATE LATCH SSG
• Gate latch with holes for pad lock. (Pad lock not included.)
• Lift and drop design keeps handle out of the way when not in use.
SPRING LOADED BARREL BOLT BS-SL
• Weather resistance full 304 Stainless Steel construction.
• Temporaly holding system for smooth locking and unlocking.
• Knob springs back into sleeve to keep bolt in locked or unlocked position.
80
39
39
φ4,φ7.5
φ4,φ7.5
39273927
22
10
1623
L
φ12
4
3
1
2
39
3927
1623 2
80
39φ4.3
φ4.3
3927
22
10
L
φ12
4
3
1
3333
3333
77
77
Item Code Item Name L Box Carton
140-022-286 BS-SL150S 150 2pcs 40pcs
140-022-287 BS-SL300S 300 2pcs 30pcs
140-022-288 BS-SL450S 450 2pcs 30pcs
140-022-283 BS-SL150 150 2pcs 40pcs
140-022-284 BS-SL300 300 2pcs 30pcs
140-022-285 BS-SL450 450 2pcs 30pcs
No. Part Name Material Finish① Body Stainless Steel(SUS304) Satin② Strike Stainless Steel(SUS304) Satin
③ Bar Stainless Steel(SUS303) −
④ Knob Stainless Steel(SUS303) −
BS-SL150S
BS-SL150
20120501
Catch
es & L
atches
75
SPRING LOADED BAR LATCH BLL
BLTBAR LATCH
• Latch bolt snaps into the strike to prevent accidental release.
• Push tab on strike to release.
• Thick material ensures durability.• Thumb screw on bar keeps latch closed.
P
C2A
W C1
PH1
H2
L
4-φd
8-φd
PUSH
PUSH
OBLLD1AL-77-790
C3 C2
BLL-100
BLL-45
T-060-dr01.eps23
M-45-P21(97A)OBLLI1A
Material Finish
Stainless Steel(SUS304) Polished
Item Name W A C1 C2 C3 P Weight Box CartonL H1 H2 dItem Code
140-059-073
140-059-074
140-059-075
140-059-076
140-059-183
140-059-184
BLL-45 48 40 13 32 6.5 − 23±3 28g 20pcs 400pcs
BLL-60 63 16 37 8 − 34±4 50g 20pcs 400pcs
BLL-100 105 25 66 12.5 − 59±7 182g 10pcs 100pcs
BLL-150 155 30.5 95 7.25 16 74±14 350g 6pcs 60pcs
46
80
120
17 4.5 3.2
20 6 4.2
BLL-80 85 65 20 53 10 − 22.5 7 47±7 100g 10pcs 200pcs
26.5 8 5.5
BLL-120 127 100 28.5 80 6.75 15 28 8 56±10 5.2 270g 8pcs 80pcs
28 8 5.2
5
Material Finish
Stainless Steel(SUS304) Mirror
4-φE、φD
t
P2
L
CP1A
B
bet#d01.eps
bet#d02.eps
140-050-252
140-050-253
140-050-254
140-050-255
140-050-256
Item Name L P1 Box CartonP2
BLT-45 45 30 33 20pcs 400pcs
A B C D E t Weight
40 14 12 3.5 6 2 31g
Item Code
BLT-60 60 37 45 20pcs 400pcs48 17 15 3.8 7.5 2 54g
BLT-80 80 53 62 10pcs 200pcs65 21 18 4.3 8 3 95g
BLT-100 100 66 79 10pcs 100pcs80 24 21 4.8 9 3 177g
BLT-120 120 73 98 8pcs 80pcs90 28 24 5.1 10 4 243g
20120501
Catch
es & L
atches
76
BAR LATCH SSL
HP-AKLATCH HASP
• Unique slide-in bar keeps latch locked.• Slide out and lift the bar to release.
• Hasp with built-in latch. - Snap on the flap to keep latch closed. - Slide the latch knob to release.• Flap is spring loaded in open direction.• Plastic cap on end softens the opening sound.
t2
W2
P2
t1
H
A2A1
L2
L1
A3P1W1
4-φd、φe
Material FinishStainless Steel(SUS304) Electro Polished
Material FinishStainless Steel(SUS304) Polished
hpa#d01.eps
t
SUS304
HP1 P2
P2
B
DL2
P3
P4P3
L1
C L3
d1
d2
SUS304
HP-AK75
hpa#d02.eps
P3
L1 L2 L3 B P1 P2 P3 P4 H C D t Box Carton
250pcs
200pcs
150pcs
25pcs
20pcs
15pcs
Weight
22g
35g
48g
d2
2-φ3.3
2-φ3.3
2-φ3.4
d1
2-φ3
2-φ3.2
2-φ3.8
1.2
1.5
1.5
20.5
20.5
25
18
18
21.2
16.6
16.6
17.5
−
−
9.5
19
28
35
12
14
16
13.5
13.5
17
22.2
24.2
27.4
13
19
24.8
48
63
72
51
66
76
Item Name
HP-AK50
HP-AK65
HP-AK75
140-180-801
140-180-802
140-180-803
Item Code
140-014-008
Item Code
140-014-009
140-014-010
e
6.2
d
4.2
t2
2
t1
2
P2
26
H
14.5
W2
35
A1
13
A2
15
A3
13
P1
26
W1
35
L1
50
Box Carton
10pcs 150pcs
Weight
32g
85.22.5237 1950 18 20 18 375070 10pcs 150pcs68g
95.83352 21.570 22 25 22 5270
L2
20±4
28±6
45±15100
Item Name
SSL-50
SSL-70
SSL-100 5pcs 80pcs142g
20120501
Catch
es & L
atches
77
STAINLESS STEEL HASP HP-635S, 645S, 660S
• Rotating padlock eye allows hasp to stay fastened tight without a padlock.
• Ideal for harsh and high corrosion environments.
• Rotating padlock eye allows hasp to stay fastened tight without a padlock.
• Ideal for harsh and high corrosion environments.
HP-120
HP-75、100HP-40、50Strike
H1
H2
D
t
d2 L3 d1
P4
P3P2
P1
□C
L1
L2
B
P3 P5
P4
P2 P3
P1
P4P5P3
C1
C
HP-120
HP-75、100HP-40、50Strike
H1
H2
D
t
d2 L3 d1
P4
P3P2
P1
□C
L1
L2
B
P3 P5
P4
P2 P3
P1
P4P5P3
C1
C
Material FinishStainless Steel(SUS304) Polished
140-050-225
140-050-226
140-050-227
140-050-228
Item Name L1 L2 L3 B P1 P2 P3 P4 P5 H1 H2 C D t d1 d2 Weight Box Carton
HP120 120 115 35.5 40 21 22 38 26 15 34.8 27.9 40.5 31 2.5 4-φ5.2 4-φ5.2 172g 8pcs 80pcs
HP40 40 37 13 22 13 6.4 10.8 12 − 22 17.9 15.3 17.7 1.2 2-φ3 2-φ3 21.5g 30pcs 300pcs
HP50 50 47 13 22.3 13 9 16 12 − 22 17.9 18.3 17.7 1.2 2-φ3 2-φ3 24g 25pcs 250pcs
HP65 65 62 19 24 13 13 21.5 14 − 24.5 20.4 24.5 22.5 1.5 2-φ3.2 4-φ3.2 41.5g 20pcs 200pcs
HP75 75 72 24.8 27 15 15 25.7 16 9.5 27.4 22 27.8 23.2 1.5 3-φ3.8 4-φ3.8 51.5g 15pcs 150pcs
HP100 100 95 30 35.5 19 19 29 21 10 32.2 27.9 35.5 31 2 3-φ4 4-φ4.5 118.5g 10pcs 100pcs
Item Code
140-050-224
140-050-229
Material FinishStainless Steel(SUS316) Electro Polished
Item Code Item Name L W A B C H Weight Box Carton140-039-603 HP-635S 88.9 38.1 38.1 33.3 40.5 34.9 130g 25pcs 200pcs140-039-604 HP-645S 114.3 38.1 38.1 57.2 61.9 34.9 184g 20pcs 160pcs140-039-605 HP-660S 152.4 50.8 38.1 69.9 98.4 34.9 302g 10pcs 100pcs
STAINLESS STEEL HASP HP
WELD-ON STAINLESS STEEL HASP HP-635, 645, 660
Material FinishStainless Steel(SUS316) Electro Polished
Item Code Item Name L W A B C D H Weight Box Carton140-039-602 HP-635 88.9 38.1 38.1 33.3 41.3 23.8 20.6 110g 25pcs 200pcs140-039-601 HP-645 114.3 38.1 38.1 57.2 64.3 23.8 20.6 173g 20pcs 160pcs140-039-600 HP-660 152.4 50.8 38.1 69.9 100.4 23.8 20.6 290g 10pcs 100pcs
• Ideal for harsh and high corrosion environments.
20120501
Catch
es & L
atches
78
DRAW LATCH (W/SAFETY LOCK) STF100
DRAW LATCH (W/SAFETY LOCK) STF82L
• With safety lock to prevent accidental release.• Push safety button and lift to release.
• With safety lock to prevent accidental release.• Push safety button and lift to release.
80kgf
Item Name Box
6pcs
Load Capacity Weight
784N 190gSTF100
Carton
120pcs
Item Code
120-044-024
2 0.5
25
5
(13.5)
(82)
17 5
(38.5)
(33
.6)
32
19.5
13
30 0
90°
1 2
34 5
Countersunk Hole
Strike Mounling Plate
図.1 筺体での取付例
CartonLoad Capacity Box
STF82L 784N 12pcs 180pcs
Weight
111g80kgf
Item NameItem Code
120-913-101
No. Part Name Material Finish/Color
Polished
SatinSatinBlackSatin
Stainless Steel(SUS304)
Stainless Steel(SUS304)Stainless Steel(SUS304)
RubberStainless Steel(SUS304)
Mounting Plate
Body ABody B
Push leverStrike
⑤
①②③④
Countersunk Hole
80kgf
80kgf
No.
⑤
①②③④
Part Name
Mounting Plate
Body ABody B
Push leverStrike
Material
Stainless Steel(SUS304)
Stainless Steel(SUS304)Stainless Steel(SUS304)
RubberStainless Steel(SUS304)
Finish/Color
Polished
SatinSatinBlackSatin
20120501
Catch
es & L
atches
79
DRAW LATCH (SPRING LOADED) STF80
DRAW LATCH STF40
ADJUSTABLE DRAW LATCH CHN
• Spring Loaded latch prouides constant holding tension for secure latching.
• Durable against vibration.
• Exposed threaded rod allows adjustment of latching distance.
Finish
Polished
SatinSatinSatin
No. Part Name Material
Stainless Steel(SUS304)
Stainless Steel(SUS304)Stainless Steel(SUS304)Stainless Steel(SUS304)
Mounting Plate
Body ABody BStrike
①②③④
32 332 0.5
1 2
19.5
3 4
25
5
(13.5)(80)
(36.5)
17 5
90°
13
30
80kgf
Item Name CartonBox
STF80 12pcs 180pcs
Weight
110g
Load Capacity
784N
Item Code
120-914-490
14Strike Body
12
20 1612
40
38
Weight Box Carton
30g 30pcs 300pcs
Item Code
120-044-025
Item Name Material Finish
STF40 Stainless Steel(SUS304) Polished
Stainless Steel Steel
TARGET
※
背景ありB3-030-dr02_5.eps
■Installation
Stainless Steel(SUS304)
Yellow Zinc Chromate
Yellow Zinc Chromate
Steel
Steel
No. Part Name Material FinishBead Blashing
Bead Blashing
PlainPlain
Stainless Steel(SUS304)
Stainless Steel(SUS304)
Stainless Steel(SUS304)Nut
Body
Counterplate
Bolt
①
②
③④
Steel
Stainless Steel
Stainless Steel
Steel
Stainless Steel
120-039-406
120-039-405
120-039-404
35675 20 10 3020 50 31.5 1132 825 8 12 10
80 25 8 25 13 60 40 37.5 30 40 10 40 15 14 12 8
90 30 10 30 15 75 50 45 35 45 12 50 20 17 14 10
35
L3
6
W3L1 L2 L5 L7
75 20 10 30
L4 L6 W1 H3
20 50 31.5 11
H1 H5
32 8
W2 W4 H2 H4
25 8 12 10
80 25 8 25 13 60 40 37.5 30 40 10 40 15 14 12 8
90 30 10 30 15 75 50 45 35 45 12 50 20 17 14 10
2.3
2.3
3
3.2
4
4
6
8
10
125g
225g
390g
Spec. φD6
Item Name
CHN-75S
CHN-75Y
CHN-80S
M Weight
3 M6 125g
CHN-80Y
CHN-90S
CHN-90Y
2
2 3 8 M8 225g
3 4 10 M10 390g
t1 t2
120-049-349
120-049-348
120-049-347
Item Code
M6
M8
M10
Steel
80kgf
20120501
Catch
es & L
atches
80
CLEAN MAGNETIC CATCHES DIGEST CLEAN HINGES & STAY DIGEST
MC-JM45WT
HG-CV HG-CV-65N
LB-CV215AMC-JM63G
MirrorMirrorMirror
FinishMirror
MaterialStainless Steel(SUS316)Stainless Steel(SCS14)Stainless Steel(SUS316)Stainless Steel(SCS14)
Part NameHandleHook
Hook ScrewBase
No.①②
④③
■Hook (Option)
Mirror120-014-143
Finish
Polished
Item Code
120-014-142
TF40C-STM
Item Name
TF40C-ST
■Body
Finish
Mirror
Material WeightLoad Capacity
330kgf3300N 248g
Item Name
Stainless Steel(SUS316)STF-CV150
Item Code
120-040-481
Mirror 330kgf3300N 248gStainless Steel(SUS316)STF-CV150M120-014-141
stfcd03.eps
stfcd02.eps
160.
5
(27)
42
4210 ( 37.
8)
30
25
25
(12)
(53)
(37)
31
2
4
3-φ5.3φ10.5
φ8
• No metal-to-metal contact.
• Ideal for clean room, semiconductor, and food industry applications.
• When used in combination with the TF40C counter plate (below) will have 300kg load capacity.
TF40C-STMStainless Steel
(SCS14)Mirror 48g120-014-143
Item Name Material Finish
TF40C-STStainless Steel
(SCS14)Polished
Weight
48g
Item Code
120-014-142
STF-CV150DRAW LATCH (CLEAN ROOM)
TF40CHEAVY DUTY COUNTERPLATE
TF40C-ST
• Heavy duty counterplate for STF-CV150 clean room draw latch.
tf40d01.eps
2130
12.5
18
3.517
25
2340
2-φ5.5、 φ10.4
330kgf
20120501
Catch
es & L
atches
81
CORNER FASTENER (W/LOCK) STF-C64A, B
• Latch mounts on corner to draw perpendicular surfaces together.
• Designed to allow front operation.
• Padlock and secondary catch options.
• Pull lever and lift latch to open.• Available with or without spring.
Door Tickness
14~ 28
14~ 28
CartonBoxWeightItem Name Spec. Material FinishItem Code
120-042-200
120-042-201
210pcs
210pcs
15pcs
15pcs
66.5g
60g
STF-C64A
STF-C64B
With Spring Stainless Steel(SUS304) Mirror
Without Spring Stainless Steel(SUS304) Mirror
STF-C64A STF-C64B
(01-613SS)
0kgf±1.50N±14
Clamping ForceN±14
58.6N±1471.3N±1483.9N±1496.5N±14
Clamping Forcekgf±1.5
6.0kgf±1.57.3kgf±1.58.6kgf±1.59.9kgf±1.5
LSizemm±0.5
40
44
414243
Corner Fastener
Fastening STF-C64A With Spring
(40)
SUS3
04PA
T.P
18(39.5)
3525
10
6
Lock Release Lever
19
19
213
.5L
2
16Hole for Sealing Pin
φ648
2-φ4.5 18 242-φ4.5
STF-C64B Without Spring
■Sealing Pin(Option)■Installation
Installation(502-9SS)
B44_B116D1A.eps
C
φDA
B
G
φHE
F
B44_B116D2A.eps
■Strike Hook (Option)
2-φ4.1
15.9
1.638.128.6
10.5
4.8
8
B40_B01-D2A.EPS2-φ4.1
15.9
7.8
1.6
10.3
31
4
B40_B02-D2A.EPS
B41_B07-D2A.EPS
2-φ4.1
15.1
15.9
6.3
1.6
10.3
29.4
4
Item Name
01-613SS
Material Finish
Stainless Steel(SUS304)
Polished
Item Code
120-040-415
Item Name
02-613SS
Material Finish
Stainless Steel(SUS304)
Polished
Item Code
120-040-421
Item Name
502-7SS
A B C φD
38 43 13 1.8
Item Code
120-041-822
Item Name
502-9SS
E F G φH
63 66 18 2.6
613-9SS 55 59 15 2.3
Item Code
120-041-823
120-041-825
Item Name
07-613SS
Material Finish
Stainless Steel(SUS304)
Polished
Item Code
120-040-452
Material Finish
Stainless Steel(SUS304) Plain
■Body
Corner Fastener
Corner Fastener Hinge
20120501
Catch
es & L
atches
82
CORNER FASTENER HINGE (W/LOCK) STH-C64
CORNER FASTENER STF-A56AH, AC
Item Code Item Name Weight (g) Box (pcs) Carton (pcs)120-091-430 STH-C64 90 10 140
Material Finish304 Stainless Steel Polished
Installation
• Compresses cover to achieve better sealing.• Works with STF-C64 fastener.• To be used with rubber gasket.• Designed to allow front operation.• Locks when fastened to prevent accidental
release.• Pull lever and lift latch to open.
Door size: W300 x H400 /pair Door thickness: t = 24mm ~ 28mm Door weight: Max. 2.8 kg (6.1 lbs) /pair
• Latch mounts on corner to draw perpendicular surfaces together.
• Designed to allow front operation.• Available in two different counter plate styles.• Provides constant holding tension for secure
latching.
STF-A56AH
Dimension shown is in case of clamping force"0".
STF-A56AC
Dimension shown is in case of clamping force"0".
(39.
5)※
12.5 15.540.5
25 35
2
12
18(39)
12.5
1.5
6 15 (17) 7
10
2-φ4.52-φ4.5
B3-035-dr01_2.eps 背景なし
12.5
(39.
5)※
15.540.5
1.59
2
18(39)
10 17
2535
6 15 (17)2-φ4.52-φ4.5
B3-035-dr02_2.eps 背景なし
STF-A56AH STF-A56AC
Item Name Material Finish
STF-A56AH Stainless Steel(SUS304) Mirror
Item Code
120-040-480
Item Code
120-040-479
Item Name Material Finish
STF-A56AC Stainless Steel(SUS304) Mirror
20120501
Catch
es & L
atches
83
COMPRESSION DRAW LATCH SCC-60
COMPRESSION DRAW LATCH SCC-40
COMPRESSION DRAW LATCH SCC-30
• Spring loaded design compensates for tolerance and vibrations.
• Provides constant hold tension for secure latching.
• Spring loaded design compensates for tolerance and vibrations.
• Provides constant hold tension for secure latching.
• Spring loaded design compensates for tolerance and vibrations.
• Provides constant hold tension for secure latching.
14
25
12
3 -φ5.22 -φ5.2
1261
24
24
14※49
19
1337
16
2 2( 4
6)
In case of clamping force"0".
No. Part Name Material Finish① Body Stainless Steel(SUS304) Polished② Strike Stainless Steel(SUS304) Polished
Item Name
SCC-60
Item Code
120-043-981
16
12
2 -φ3.22 -φ3.2
84215.5
2014※42
13
8.5
231.
5
1.5 13
( 37)
In case of clamping force"0".
No. Part Name Material Finish① Body Stainless Steel(SUS304) Polished② Strike Stainless Steel(SUS304) Polished
Item Code
120-043-980
Item Name
SCC-40
1.5
23317.
8
1.5
2-φ3.22-φ3.2
( 24)8
138
30
12※28
13.5
10
2 1
scc3d01.eps
In case of clamping force"0".Item Code
120-040-693
Item Name
SCC-30
No. Part Name Material Finish① Body Stainless Steel(SUS304) Polished② Strike Stainless Steel(SUS304) Polished
20120501
Catch
es & L
atches
84
COMPRESSION DRAW LATCH SCCA-60
COMPRESSION DRAW LATCH
CORNER FASTENER
SCCA-40
PS34A
Steel Clear Zinc Chromate
No. Part Name Material Finish① Body Steel Clear Zinc Chromate
② Counter Plate
Item Name
SCCA-60
Weight
102g
Item Code
120-049-303
※Dimension shown is in case of clamping force"0".
• Spring loaded design compensates for tolerance and vibrations.
• Provides constant hold tension for secure latching.
• Spring loaded design compensates for tolerance and vibrations.
• Provides constant hold tension for secure latching.
• Latch mounts on corner to draw perpendicular surfaces together.
• Designed to allow front operation.• Padlock and secondary catch options.
※Dimension shown is in case of clamping force"0".
※Dimension shown is in case of clamping force"0".
Item Code
120-049-179
Item Name
SCCA-40
Weight
38g
20
2213
19.5
26
( 36) 25
41.5
2
56
4.5
2440
4
10
25.1
53
262
2- 4.2、 7.2
9
2- 4.2、 7.2
12
No. Part Name Material Finish
① Body Stainless Steel(SUS304) Polished
② Counterplate Stainless Steel(SUS304) Polished
Item Code Item Name ※ Tension Force Weight120-049-193 PS34A 147N 15kgf 88g
14 14※(53)
1837
1227 61
( 47)
2
3.2
25
14
.2 16
.5
12
2× 5.2
3× 5.2
※(42) 14
16
1.68
.3
407.5
15
23
( 38
)1
21
32
2 1
2× 3.2 2× 3.2
Steel Clear Zinc Chromate
No. Part Name Material Finish① Body Steel Clear Zinc Chromate
② Counter Plate
20120914
Catch
es & L
atches
85
DRAW LATCH
DRAW LATCH
DRAW LATCH
PS
P3
P3-10N
• Padlockable
8kgf
10kgf
8kgf
10kgf
10kgf
15kgf
10kgf
15kgf
Item Code
120-040-476
120-040-475
120-049-188
120-049-671
Tension Force
98N
147N
98N
147N
Item Name Type L1 L2 L3 L4 W1 W2 W3 W4 H1 H2 t1 t2 P1 (P2) P3 ∅DPS31A 16 40 10 8 23 16 26 13 9 9.5 1.2 1 10 30 23 5
PS30A 18 53 11.5 8.5 28 21 32 15 10 13 1.5 1.5 12 33 34 5.5
PS31 19 38 11 7 24 16 26 13 8 9.5 1.2 1 10 30 23 −
PS30 18 53 11.5 8.5 28 21 32 15 10 13 1.5 1.5 12 33 34 −
Item Code
120-049-313
120-049-311
120-049-314
120-049-312
Tension Force
78N
98N
78N
98N
Item Name Type L1 L2 L3 L4 W1 W2 W3 W4 H1 H2 t1 t2 P1 (P2) P3 ∅DP31A 16 40 9.5 8 24 16 27.5 13 9 9 1.2 1 10 29 23 5
P30A 18.5 53 11.5 9 28 21 33 15 9 13 1.5 1.5 12 32 34 5.2
P31 16 40 9.5 8 24 16 27.5 13 9 9 1.2 1 10 29 23 −
P30 18.5 53 11.5 9 28 21 33 15 9 13 1.5 1.5 12 32 34 −
PS30A
P31
W4
P1P3L4
W1
(L1)L2
W2
W3
t2H
2
t1H
1
(L3)
(P2)
φ3
φD
2-M3,CSK
2-M3,CSK
B3-037-dr01_2.eps 背景なし
W4
P1
P3L4
W1
(L1)L2
W2
W3
t2H
2
t1H
1
(L3)
(P2)
φ3
φD
2-M3,CSK
2-M3,CSK
B3-037-dr01_2.eps 背景なし
W4
P1
P3L4
W1
(L1)L2
W2
W3
t2H
2
t1H
1
(L3)
(P2)
φ3
φD
2-M3,CSK
2-M3,CSK
B3-037-dr01_2.eps 背景なし
Item Code Item Name Material Finish Weight Box120-049-395 P3 Steel Nickel 29.3g 100pcs
No. Part Name Material Finish
① Body Zinc Alloy Chrome
② Hook Stainless Steel(SUS304) Plain
③ Counterplate Zinc Alloy Chrome
Item Code Item Name ※ Tension Force Weight120-049-125 P3-10N 147N 15kgf 64g
2-φ3.2 φ6.8 4-φ3.2 φ6.8
14 40266.56.5
232334.5
513
24.5
8.5
(18)
177
3420
22 322.
5 122.512
473045
φ3.5
4-φ3.2 M32-φ3.2 M3 1
3 2
p310d01.eps
●Dimensions shown in case of clamping force"0".
With Pad Lock HoleWith Pad Lock Hole
Without Pad Lock Hole
Without Pad Lock Hole
With Pad Lock HoleWith Pad Lock Hole
Without Pad Lock Hole
Without Pad Lock Hole
Material FinishStainless Steel(SUS304) Polished
Material FinishBrass Chrome
20120501
Catch
es & L
atches
86
DRAW LATCH
DRAW LATCH
DRAW LATCH
PS, P
P100
P3-12,P3-11
DRAW LATCH PS35
Item Code Item Name Material Finish Weight Box
120-041-058 P100CR Steel Chrome 24g 100pcs
120-044-003 P100SUS Stainless Steel(SUS304) - 22.5g 100pcs
B3-040-dr01_3.eps 背景なし
L2
φD H1
tH2
t
L5
L1
L3L4
WW P1 P1
P2
4-φ3.22-φ3.2
19.514
2-φ42-φ4(30)
30.3 22
1.6
1.6
( 13.
5)
( 36)15 30.3 22 15
1.5
( 13.
5)
32 32(40.6) (40.6)
( 22)
15.4
27.8
( 36.
2)
( 22)
15.4 28
4419.514
2-φ42-φ4(30.1) 44
7.5
1.5
7.5
P100CR P100SUS
L1
7.5
7.5
1058
9.5
21
15.
2
18.
2
14( 1
8)12 24
18
φ1.5
2-φ2.1 2-φ2.1
B3-041-dr02_3.eps 背景なし
6.5
27
137
13.5
22 21
14
30
13.5
11
17
1 1
φ2 8.5
6
2-φd1、φd2
2-φd1、φd2
B3-041-dr01_3.eps 背景なし
PS33
PS32、P32
5kgf
Item Name
PS33
Item Code
120-049-672
Material
Stainless Steel(SUS304)
Tension Force
49N
Finish Weight
Polished 6g
8kgf78N
8kgf78N
φd2
5.2
4.2
Weight
12g
11g
Item Code
120-049-318
120-059-452
Finish
Chrome
Polished
Tension ForceMaterial
Steel
Stainless Steel(SUS304)
Item Name
P32
PS32
2kgf
Tension Force
19N
Material Finish Weight Box
Stainless Steel(SUS304) Polished 15g 500pcs
10 30 10 56
12
15 21
15.
5
1
26
11
10
25 (33)
φ2
2-φ3.4 2-φ3.4
B3-041-dr03_2.eps 背景なし
Item Code
120-049-345
Item Name
PS35
Item Code Item Name Material Finish L1 L2 L3 L4 (L5) W H1 H2 t P1 P2 φ D ★ Tension Force Weight120-049-317 P3-12 Brass Chrome 30 7 8 4 10 30 9.5 5 0.8 24 20 2.5 49N 5kgf 15g
120-049-316 P3-11 Brass Chrome 40 10 11 5.5 14 37 12 8 1.2 29 25 3 78N 8kgf 30g
20120501
Catch
es & L
atches
87
P34
P11
P8
P91
FASTENER
FASTENER
FASTENER
FASTENER
p34#d01.eps
15 12 2 φ5
φ10
3954
3
23
25
14
5
26.3 66.5
5.5
21 34
2-φ5.2 2-φ5.2
2 1No. Part Name Material Finish① Body Steel Yellow Zinc Chromate
② Counterplate Steel Yellow Zinc Chromate
Item Code Item Name Weight
120-049-015 P34 89g
2 -φ3.2φ5.5 2 -φ3.2φ5.5
10 13 16 26
18 39
37
237
24
12.5
1.2
1.2
6.5
φ3
φ59
6
2 1
Chrome
FinishChrome
No. Part Name① Body
② Counter Plate
Item Name Material Weight Box
P11 Steel 17.3g 200pcs
Item Code
120-044-004
Material BoxFinish Weight
Steel Chrome 10.2g 250pcs
2-φ3.4φ4.3
10.8
( 22)
2-φ3.212.5
5 6
71
φ2
2629
1
13.5
(20.3)
14.5
22.3
13.5
7
( 9.2
)
(φ3.5)
( 0.5
) Item Code
120-048-025
Item Name
P8
φ4
2-φ5.2 8.5
85275
2-φ4.517
25.5 3619
1.9
40
25.5
14
1.6
( 20)
12
11
No. Part Name Material FinishClear Zinc ChromateClear Zinc Chromate
SteelSteel
BodyCounter Plate
①②
Item Code120-040-507
Item Name Weight Box
P91 79g 100pcs
• M5 pan head screw with cross hole.
• Lever spring avoid lever to move during opening/fastening.
• Lever spring avoid lever to move during opening/fastening.
20120501
Catch
es & L
atches
88
DRAW LATCH (W/HANDLE) THF-100
DRAW LATCH THF-75
• With handle and safety lever.• Push safety lever and lift latch to open.• Spring loaded to hold handle in retracted position.• Includes a function to allow use for pad lock or tamper
indicator seals. (Pad lock and wire not included)
• Safety lever prevents accidental release. • Push the safety lever and lift latch to open.• Includes a function to allow use for pad lock or tamper
indicator seals. (Pad lock and wire not included)
980N
Load Capacity
100kgf
4
12
3
thf1d01.eps
3-φ4.5 9
9-φ6.5
13011484
27 27
Adjustment±5
50
50 50
5555
48
230
9
126
8
12932
φ10
Pad lock(Not included)
Safety lock
Tamper indicator seal(Not included)
■Adjustment
thf7d02.eps
thf7d03.eps
12
Safety lock
①②
SteelBody Yellow Zinc ChromateShaft Stainless Steel(SUS304) —
MaterialNo. Part Name Finish
Safety LeverStrike
③④
Stainless Steel(SUS304)Steel
—Yellow Zinc Chromate
Weight
1064g
Item Name
THF-100
Carton
10pcs
Item Code
120-040-506
FinishPart NameNo. Material
Stainless Steel(SUS304)Stainless Steel(SUS304)
Steel
Steel
②③④
①Shaft
Safety LeverStrike
Body
——
Yellow Zinc Chromate
Yellow Zinc Chromate
thf7d01.eps
3-φ4.5 9
6-5.4
2
1
4
3
(87)84
27 2740
Adjustment±5
40 8
32
50
6355
30
9
163
68~
58
23
Tamper indicator seal(Not included)
Pad lock(Not included)
thf7d03.eps
12
Safety lock
thf7d02.eps
75kgf730N 657g
Item Code
120-040-505
Item Name
THF-75
Load Capacity Weight Carton
20pcs
■Adjustment
100 kgf
75 kgf
20120501
Catch
es & L
atches
89
2 -φ8
34.5
61
60
2 -φ4.2
43
22
30(10)
3.8 11
16 16
3 -φ4.236.50.5
20
3 1 2
4
MINI DRAW LATCH PN-51
DRAW LATCH P-1040/SS
DRAW LATCH P-102H/SS
No. Part Name Material Finish① Body
304 Stainless SteelPolished
② Lever
③ Hook 430 Stainless Steel
④ Counterplate 304 Stainless Steel
⑤ Key Steel Nickel
Item Code Item Name Weight Box Carton 120-049-413 P-1040/SS 105g 60pcs 240pcs
No. Part Name Material Finish
① Body304 Stainless Steel
Polished② Lever
③ Hook 430 Stainless Steel
④ Counterplate 304 Stainless Steel
Item Code Item Name Weight Box Carton 120-049-234 P-102H/SS 85g 60pcs 600pcs
• Lift handle and turn 180° open and close latch.• Small stainless draw latch with key.
Note: key changes are not available.
• Lift handle and turn 180° open and close latch.• Stainless draw latch with key.
Note: key changes are not available.
• Lift handle and turn 180° open and close latch.
11
.51
03
0
51
24
14
16
43
27
.3
3.510.5
31~(33)6
9.213
10 27
1.5
6.5
213
4
5
PAT.P
2-4.2
2-4.2
No. Part Name Finish①、② Body, Lever Plain
③ Hook Plain
④ Counter plate Plain
⑤ Key Nickel
MaterialStainless Steel(SUS304)Stainless Steel(SUS304)Stainless Steel(SUS304)
Steel
Weight Box
50g 40pcs
Item Name
PN-51
Item Code
120-040-489
20130225
Catch
es & L
atches
90
251F, 151FPUSH LOCK FASTENER (LARGE/FLUSH TYPE)
Item Code Set Item Name Grip Dimention G Plug Dimention L Retaining Force Weight120-040-259 251F-01-3 1.2~ 2 20.5 245N 25kgf 15g120-040-260 251F-02-3 2~ 2.8 21 245N 25kgf 15g120-040-261 251F-03-3 2.8~ 3.6 22 245N 25kgf 15g120-040-262 251F-04-3 3.6~ 4.4 23 245N 25kgf 15g120-040-263 251F-05-3 4.4~ 5.2 23.5 245N 25kgf 15g120-040-264 251F-06-3 5.2~ 6 24.5 245N 25kgf 16g
■251F
No. Part Name Material Finish① Plug Polyacetal Black
② Ring Steel Black
③ Socket Polyacetal Black
④ Nut Polyacetal Black
No. Part Name Material Finish① Plug Brass Chrome
② Ring Steel Black
③ Socket Brass Nickel
④ Nut Zinc Alloy Nickel
■151FItem Code Set Item Name Grip DimentionG Plug Dimention L Retaining Force Weight
120-013-718 151F-01-2 1.2~ 2 20.5 245N 25kgf 15g120-013-719 151F-02-2 2~ 2.8 21 245N 25kgf 15g120-013-720 151F-03-2 2.8~ 3.6 22 245N 25kgf 15g120-013-721 151F-04-2 3.6~ 4.4 23 245N 25kgf 15g120-013-722 151F-05-2 4.4~ 5.2 23.5 245N 25kgf 15g120-013-723 151F-06-2 5.2~ 6 24.5 245N 25kgf 16g
251F
151F
• 2 piece fastener allows for fast and easy access with complete removal of panel.
- Attach socket into outer panel / plug into removable panel. - Insert plug into socket and push to lock / unlock.• Flush locked design prevents snagging.• Fastens plastic or sheet metal panels.
Max. 2.7Min. 0.6
Max. 2.7 (4.8)48
25.5±0.1
Max. 7
322 ( 30)
90°±2°
T2=0
.6~2
.2T2
=2.2
~5
25.5±0.1
90°±2°
0.6
±0.1
T1=0
.6~7
(0.8
~8)
(2.5
~7.2
)
(Mor
e th
an 8
)
30.2±0.1
20.2±0.1
25.5±0.129±0.1
20.2 ±0.1
17.2
T1=7
~
48
Mor
e th
an 2
.7
25.5±0.1 25.5±0.1
29.6±0.1
(100°)
Min. 0.6 (0.8)Max. 2.7Min. 0.6
Max. 2.7 (4.8)48
25.5±0.1
Max. 7
322 ( 30)
90°±2°
T2=0
.6~2
.2T2
=2.2
~5
25.5±0.1
90°±2°
0.6
±0.1
T1=0
.6~7
(0.8
~8)
(2.5
~7.2
)
(Mor
e th
an 8
)
30.2±0.1
20.2±0.1
25.5±0.129±0.1
20.2 ±0.1
17.2
T1=7
~
48
Mor
e th
an 2
.7
25.5±0.1 25.5±0.1
29.6±0.1
(100°)
Min. 0.6 (0.8)
Max. 2.7Min. 0.6
Max. 2.7 (4.8)48
25.5±0.1
Max. 7
322 ( 30)
90°±2°
T2=0
.6~2
.2T2
=2.2
~525.5±0.1
90°±2°
0.6
±0.1
T1=0
.6~7
(0.8
~8)
(2.5
~7.2
)
(Mor
e th
an 8
)
30.2±0.1
20.2±0.1
25.5±0.129±0.1
20.2 ±0.1
17.2
T1=7
~48
Mor
e th
an 2
.7
25.5±0.1 25.5±0.1
29.6±0.1
(100°)
Min. 0.6 (0.8)
Max. 2.7Min. 0.6
Max. 2.7 (4.8)48
25.5±0.1
Max. 7
322 ( 30)
90°±2°
T2=0
.6~2
.2T2
=2.2
~5
25.5±0.1
90°±2°
0.6
±0.1
T1=0
.6~7
(0.8
~8)
(2.5
~7.2
)
(Mor
e th
an 8
)
30.2±0.1
20.2±0.1
25.5±0.129±0.1
20.2 ±0.1
17.2
T1=7
~
48
Mor
e th
an 2
.7
25.5±0.1 25.5±0.1
29.6±0.1
(100°)
Min. 0.6 (0.8)
Max. 2.7Min. 0.6
Max. 2.7 (4.8)48
25.5±0.1
Max. 7
322 ( 30)
90°±2°
T2=0
.6~2
.2T2
=2.2
~5
25.5±0.1
90°±2°
0.6
±0.1
T1=0
.6~7
(0.8
~8)
(2.5
~7.2
)
(Mor
e th
an 8
)
30.2±0.1
20.2±0.1
25.5±0.129±0.1
20.2 ±0.1
17.2
T1=7
~
48
Mor
e th
an 2
.7
25.5±0.1 25.5±0.1
29.6±0.1
(100°)
Min. 0.6 (0.8)
Max. 2.7Min. 0.6
Max. 2.7 (4.8)48
25.5±0.1
Max. 7
322 ( 30)
90°±2°
T2=0
.6~2
.2T2
=2.2
~5
25.5±0.1
90°±2°
0.6
±0.1
T1=0
.6~7
(0.8
~8)
(2.5
~7.2
)
(Mor
e th
an 8
)
30.2±0.1
20.2±0.1
25.5±0.129±0.1
20.2 ±0.1
17.2
T1=7
~
48
Mor
e th
an 2
.7
25.5±0.1 25.5±0.1
29.6±0.1
(100°)
Min. 0.6 (0.8)
13.1
25.8
28.6
90°
1.7
M25×1
12(11)
30
M25×1
6
(100°)
(3.6
)
(1.9
)
(25.
7)
3 4
280.
4
20
L
1.2
17.224
( 18.6)
(1)
1 2
Max. 0.6After locked
QC
G P
Q C
G P
QC
G P
QC
G P
Q C
G P
QC
G P
QC
G P
Q C
G P
QC
G P
■Preparation (Plug)
■Preparation (Socket)
■Grip Dimensions
C=0~2.2 G=P+C+0.7Q=2.2~5 (2.5~7.2)
C=More than 2.3 G=P+C-1.4Q=6.2~2.2
C=More than 2.5 G=P+C-1.7Q=0.6~2.7 (0.8~4.8)
Board Thickness=0.6~7 (0.8~8) Board Thickness=7~17.2 (More than 8)
Board Thickness=2.2~5 (2.5~7.2) Board Thickness=0.6~2.2
*( ) dimension for 151F
*( ) dimension for 151F
*( ) dimension for 151F
Board Thickness=0.6~2.7 (0.8~4.8)
*( ) dimension for 151F
*( ) dimension for 151F
20120501
Catch
es & L
atches
91
252F, 152FPUSH LOCK FASTENER (MINI/FLUSH TYPE)
252F
152F
No. Part Name Material Finish① Plug Brass Chrome
② Ring Steel Passivation
③ Socket Zinc Alloy Clear Zinc Chromate
④ Nut Steel Chromate
No. Part Name Material Finish① Plug Polyacetal Black
② Ring Steel Black
③ Socket Polyacetal Black
④ Nut Polyacetal Black
Item Code Set Item Name Grip DimentionG Plug DimentionL Retaining Force Weight120-040-279 252F-01-3 1.2~ 2 18.5 147N 15kgf 6g120-040-280 252F-02-3 2~ 2.8 19.0 147N 15kgf 6g120-040-281 252F-03-3 2.8~ 3.6 20 147N 15kgf 6g120-040-282 252F-04-3 3.6~ 4.4 20.5 147N 15kgf 6g120-040-283 252F-05-3 4.4~ 5.2 21.5 147N 15kgf 6g120-040-284 252F-06-3 5.2~ 6 22.5 147N 15kgf 6g
■252FItem Code Set Item Name Grip DimentionG Plug DimentionL Retaining Force Weight120-013-709 152F-01-1 1.2~ 2 18.5 147N 15kgf 6g120-013-710 152F-02-1 2~ 2.8 19 147N 15kgf 6g120-013-711 152F-03-1 2.8~ 3.6 20 147N 15kgf 6g120-013-712 152F-04-1 3.6~ 4.4 20.5 147N 15kgf 6g120-013-713 152F-05-1 4.4~ 5.2 21.5 147N 15kgf 6g120-013-714 152F-06-1 5.2~ 6 22.5 147N 15kgf 6g
■152F
11
L
8( 7.9)
1
130.
26 6.4
( 6.8)
1 2
Max. 0.6After locked
43
15.6
23.6
(21.
4) 1.7
(1.5
)
M12×1(15/32-32NS)
10.6( 11)
5(2
.1)
16(14.5)90°
(100° ±0.2°)
18( 16)
±0.18.2M
ax. 5
.4
T1=0
.6~5
.4 (0
.8~4
.8)
±0.18.2±0.1( 8.1 ) T1
=5.4
~12.
7(M
ore
than
4.8
)
±0.1( 8.2 )
18( 16)
±0.18.2
Max
. 5.4
T1=0
.6~5
.4 (0
.8~4
.8)
±0.18.2±0.1( 8.1 ) T1
=5.4
~12.
7(M
ore
than
4.8
)
±0.1( 8.2 )
16±0.1
( 16)
12.3±0.1
0.6±
0.1
T2==
2.2~
12
(100°)
17.2±0.1
T2=0
.6~2
.2
12.3±0.1
90°±2°
90°±2°16±0.1
( 16)
12.3±0.1
0.6±
0.1
T2==
2.2~
12
(100°)
17.2±0.1
T2=0
.6~2
.2
12.3±0.1
90°±2°
90°±2°
12.3±0.1
28
12.3±0.1
Max. 9.7 (10)
Min. 0.6 (0.8)
12.3±0.1
28
12.3±0.1
Max. 9.7 (10)
Min. 0.6 (0.8)
QC
PG
QC
PG
QC
PG
QC
PG
■Preparation (Plug)
■Preparation (Socket)
■Grip Dimensions
C=0~2.2 (0~2.5)G=P+C+0.7Q=2.2~12
C=More than 2.3 (2.2)G=P+C-1.4Q=0.6~9.7 (0.8~1.0)
*( ) dimension for 152F
*( ) dimension for 152F
*( ) dimension for 152F
*( ) dimension for 152F *( ) dimension for 152F
Board Thickness=0.6~5.4 (0.8~4.8) Board Thickness=5.4~12.7 (More than 4.8)
Board Thickness=2.2~12 Board Thickness=0.6~2.2 Board Thickness=0.6~9.7 (0.8~1.0)
• 2 piece fastener allows for fast and easy access with complete removal of panel.
- Attach socket into outer panel / plug into removable panel.
- Insert plug into socket and push to lock / unlock.• Flush locked design prevents snagging.• Fastens plastic or sheet metal panels.
20120501
Catch
es & L
atches
92
255F, 155FPUSH LOCK FASTENER (MINI/BUTTON TYPE)
255F
155F
No. Part Name Material Finish① Plug Zinc Alloy Chrome② RIng Steel Passivation③ Socket Zinc Alloy Clear Zinc Chromate
④ Nut Steel Clear Zinc Chromate
■155FItem Code Set Item Name Grip Dimention G Plug Dimention L Retaining Force Weight
120-013-715 155F-01-1 1.2~ 2.8 23.5 147N 15kgf 6g120-013-716 155F-03-1 2.8~ 4.4 25 147N 15kgf 6g120-013-717 155F-05-1 4.4~ 6 26.5 147N 15kgf 6g
No. Part Name Material Finish/Color① Plug Poryaceta Black② RIng Steel Black③ Socket Poryaceta Black
④ Nut Poryaceta Black
Item Code Set Item Name Grip Dimention G Plug Dimention L Retaining Force Weight120-040-299 255F-01-3 1.2~ 2.8 23.5 147N 15kgf 6g120-040-300 255F-03-3 2.8~ 4.4 25 147N 15kgf 6g120-040-301 255F-05-3 4.4~ 6 25.5 147N 15kgf 6g
■255F
L 1
6.4
8
11
130.
25
1 2( 6.8)
( 7.9)
Max. 6After locked
90°
15.6
23.6
1.7
(1.5
)
M12×1
10.6
5
16(100° ±0.2)
( 11)
(15/32-32NS)
(14.5)
(21.
4)
(2.1
)
3 4
*( ) dimension for 155F
( 16) 18
5.4~
12.7
(M
ore
than
4.8
)
0.6~
5.4
(0.8
~4.
8)
±0.1 8.2±0.18.1( )
±0.1 8.2±0.1 8.1( )
Max
. 5.4
( 16) 18
5.4~
12.7
(M
ore
than
4.8
)
0.6~
5.4
(0.8
~4.
8)
±0.1 8.2±0.18.1( )
±0.1 8.2±0.1 8.1( )
Max
. 5.4
90° ±2°
(100°)
( 16)16±0.1
12.3±0.1
0.6±
0.1
2.2~
12
17.2±0.1
0.6~
2.2
12.3±0.1
12.3±0.1
28
90°±2°
Max
. 9.7
Max. 9.7Min. 0.6
90° ±2°
(100°)
( 16)16±0.1
12.3±0.1
0.6±
0.1
2.2~
12
17.2±0.1
0.6~
2.2
12.3±0.1
12.3±0.1
28
90°±2°
Max
. 9.7
Max. 9.7Min. 0.6
28
12.3±0.1 12.3±0.1
Max. 9.7 (10)
Min. 0.6 (0.8) 28
12.3±0.1 12.3±0.1
Max. 9.7 (10)
Min. 0.6 (0.8)
QC
PG
QC
PG
QC
PG
QC
PG
■Preparation (Plug)
■Preparation (Socket)
■Grip Dimensions
Board Thickness (P)=0.6~5.4 (0.8~4.8) Board Thickness (P) =5.4~12.7(More than 4.8)
Board Thickness=2.2~12
C=0~2.2 (0~2.5)G=P+C+0.7Q=2.2~12
C=More than 2.3 (2.2)G=P+C-1.4Q=0.6~9.7
*( ) dimension for 155F
*( ) dimension for 155F
*( ) dimension for 155F
Board Thickness=0.6~2.2 Board Thickness=0.6~9.7(0.8~10)
• 2 piece fastener allows for fast and easy access with complete removal of panel.
- Attach socket into outer panel / plug into removable panel.
- Insert plug into socket and push to lock / unlock.• Flush locked design prevents snagging.• Fastens plastic or sheet metal panels.
20120501
Catch
es & L
atches
93
PUSH LOCK FASTENER (PUSH-TURN TYPE) 149 SERIES
■Socket
■Plug
Socket
Plug
○B
※ Made to order
※ Made to order
No. Part Name Material Finish/Color① Pin Stainless Steel(SUS430) Plain
② Cup Plastic Grey
Item Code Item Name G=T1+C−0.5 Board ThicknessP C120-045-318 149S06-1-1AA 0.6~1.4 0.6~1.4 1.3~0.5
120-049-416 149S06-2-1AA 1.4~2.2 0.6~2.2 2.1~0.5
120-045-319 ※149S06-3-1AA 2.2~3 0.6~2.2 2.9~1.3
120-048-022 149S06-4-1AA 3~3.8 0.6~2.2 3.7~2.1
120-045-320 149S06-5-1AA 3.8~4.6 0.6~2.2 4.5~2.9
○AItem Code Item Name Board ThicknessP H1
120-045-318 149S06-1-1AA 0.6~1.4 19.2
120-049-416 149S06-2-1AA 1.4~2.2 20
Item Code Item Name A B Board Thickness T Material Weight120-045-322 149R02-2-1AA 2.6 1.7 1.2 ~ 1.8 Stainless
Steel(SUS304)1g
120-045-323 149R02-3-1AA 3.6 7.9 1.8 ~ 2.6 1g
Item Code Item Name H1 H2 Weight120-045-318 149S06-1-1AA 19.2 16.1 2g
120-049-416 149S06-2-1AA 20 16.9 2g
120-045-319 ※ 149S06-3-1AA 20.8 17.7 2g
120-048-022 149S06-4-1AA 21.6 18.5 2g
120-045-320 149S06-5-1AA 22.4 19.3 2g
Preparation (Socket) Application ExampleSocket
Snap-InT
±0.111.5
±0.
19.
5
Preparation (Plug)Plug
• 2 piece fastener allows for fast and easy access with complete removal of panel.
- Attach socket into outer panel / plug into removable panel.
- Insert plug into socket and push to lock / unlock.• Flush design when locked prevents snagging.• Fastens plastic or sheet metal panels.
20120501
Catch
es & L
atches
94
FLUSH SLAM LATCH
LATCH HANDLE
LC-65A
LH-203
FLUSH SLAM LATCH LC-48
50
50(
203.
5)
15゜
90゜ 20
P.C.D 42
7.2
3.2
4.5
8
4
5019
AA 6
5
50
32
2.3
4
1
6
9
62.1
5
15゜
0.5゜
Weight
500g
Item Code
140-010-223
Item Name
LH-203
No. Part Name Material Finish① Handle Aluminum Alloy Black
⑤ Plate A Steel Yellow Zinc Chromate
⑥ Plate B Steel Yellow Zinc Chromate
② Axis Steel Yellow Zinc Chromate
③ Bracket Brass Black
④ Mounting Plate Steel Yellow Zinc Chromate
■Installation
LC-65A
Item Code
140-050-206
Item Name Weight Box
108g 10pcs
Carton
100pcs
Door Thickness
2~ 3.2
②
④
Latch BoltCover
Base Plate
PolyacetalStainless Steel(SUS304)Stainless Steel(SUS304)
WhitePolishedPolished
③
①No.
BodyPart Name
Aluminum Alloy
MaterialSilverFinish
Latch
Baseplate
■Sheet metal thickness■Installation58.5
33.5
R1.5
A PAT.P
33.5
5~6
1058
R2
45
5565
3.52~
3.2
2 2
1414
24
29 30
40
14 37
4322
33
Door
43 2
1
■Bore Dimensions
• Door will be latched when closed.• Pull paddle handle to open.• Non-Handed: Can be installed on left or right side.
• Designed for panel thickness 2.0~3.2 mm.• Easy installation. Insert the latch body through cutout section and simply screw-on the back plate.
゜
B24
.5+
0.3
0
42.5+0.30
No. Part Name Material Finish
① Body304 Stainless Steel Plain
② Lever
③ Latch Bolt PBT Plastic White
④ Back Cover304 Stainless Steel Plain
⑤ Back Plate
Item Code Item Name A B Weight (g) Box (pcs) Carton (pcs)140-021-199 LC-48-3 3.5(max. panel: 3.2mm) 1.0~ 1.6 35 40 400140-021-200 LC-48-5 5.1(max. panel: 4.6mm) 1.0~ 2.3 35 40 400
• Door will be latched when closed.• Pull paddle handle to open.• Non-Handed: Can be installed on left or right side.
• UL-94 V0 rated flame retardant material.• Easy installation. Insert the latch body through cutout section and simply screw-on the back plate.
20120619
Catch
es & L
atches
95
FLUSH SLAM LATCH
FLUSH SLAM LATCH
FLUSH SLAM LATCH
P10
ATL-64
WB-900418, WB-900408
B23_BWB-D1B.EPS
84.5
93.7
114
95.3
R6
■Bore Dimensions
B23_BWB-D1A.EPS
19 108
14095.3
7693.7
1054-φ5
40
28
22
1243
Without lock With lock
No. Finish
④ Clear Zinc Chromate
Material
Steel
① Stainless Steel(SUS304) Mirror② Steel Clear Zinc Chromate
Part NameBody
Latch Bolt③ Cylinder Zinc Alloy Chrome
Cam
Key type
−
Key Different
Key Alike
Item Code
140-010-009
140-010-030
140-010-031
Item Name
WB-900408
WB-900418-B
WB-900418-D
Spec.
Without lock
With lock
With lock
• Door will be latched when closed.• Pull paddle handle to open.• Max. 150 key changes available as made to order.
• With waterploof gasket.
P10-55H
4-φd2
L4L3P1
P2
W3
B2-050-dr02-1.eps 背景あり
No.①②
FinishMaterialBrass NickelBrass Nickel
Part NameBodyLever
Item Name
P10-61H
P10-45H
P10-55H
P10-26H
P10-30H
P10-38H
Item Code
140-049-305
140-049-307
140-049-306
140-049-310
140-049-309
140-049-308
Weight
66g
28g
40g
L1 L2 L3 L4 W1 W2 W3 H t1 t2 P1 P2 d1 d2 R S
45 4 2.5 26.5 26 10 6 8 1.2 2 37 20 2.5 3 9.5 4.5
55 5 2.5 30 32 11.5 7 8 1.2 2 45 24 3 3.5 13 5.5
61 5.5 5 32 45 15 11 11.5 1.2 2 50 38 3 3.5 14 7
26 1.5 4 14 13 5 5 6 0.8 1.5 23 10 1.5 2 5 2.5 6g
30 3 1.5 18 17 5.8 6 6.5 1.2 2 25 13 1.5 2 6 3 11g
38 3 2 22.5 22 7.5 6 7.5 1.2 2 33 17.5 2 2.5 8.5 3.5 18g
1
2 4-φd1
90˚ t2H
L1Latch stroke(S)P1L2
t1W
1P2W
2
B2-050-dr01-1.eps 背景なし
No. Part Name Material Finish/Color
① Body ABS Dark Ivory
② Latch Nylon Natural
③ Spring Stainless Steel(SUS304) Plain
Item Code Item Name Spec. Door Thickness Weight Box140-012-014 ATL-64-IN For InsetDoor 0.7 ~ 1 44.5g 175pcs140-012-019 ATL-64-OT For OutsetDoor 0.7 ~ 1 44.4g 175pcs
• Door will be latched when closed.• Pull paddle handle to open.• Non-Handed: Can be installed on left or right side.
• Available for inset and overlay doors.
atl6d01.eps
20 40 60
52 64
6464
インセット扉用 アウトセット扉用
27
1317
2724 3515
.5
3
273 33
0 -0.2
51
0-0.257
1
22
3
4-R1
OutsetInset
Inset Outset
■Bore Dimensions
atl6d01.eps
20 40 60
52 64
6464
インセット扉用 アウトセット扉用
27
1317
2724 3515
.5
3
273 33
0 -0.2
51
0-0.257
1
22
3
4-R1
• Flush slam latch ideal for cover panels and small applications.
• Panel is latched when tab is flush, and released by pulling up the tab.
• Tab will stay in both flush and extended position.
• Ideal for multiple latch panels.
With Lock
■Bore Dimensions
20120501
Catch
es & L
atches
Item Name Spec.
96
LJ-61
WB-901503, WB-901504
WB-901551, WB-901552
FLUSH SLAM LATCH
FOLDING HANDLE LATCH
FOLDING HANDLE LATCH
• Door will be latched when closed.• Pull lever to open.• Non-Handed: Can be installed on left
or right side.• All components are plastic, 304 or 316
stainless steel to provide high corrosion resistance.
• Easy installation. Insert the latch body through single round cutout or bore section and screw-on the back plate. Back plate is designed to accommodate door thickness 0.8mm ~ 12mm,
and also 12.5mm ~ 22mm by flipping over the back plate.
• Door can be sealed up.• Height adjustable cam (12mm). • With waterploof gasket.
• Door can be sealed up.• Height adjustable cam (12mm). • With waterploof gasket.
■Screw
Part NameNo.①②③④⑤
BodyMaterial Finish/Color
Black、WhiteBlack、WhiteBlack、WhiteBlack、White
Mirror
PolycarbonatePolycarbonate
PolyacetalPolycarbonate
Stainless Steel(SUS316)
LeverLatch
Fixing plateStrike
Spec.
Type A
Type A
Type B
Type B
Door Thickness0.8~7.5
8~12
12.5~18.5
19~22
Screw
M5×12
M5×18
M5×12
M5×18
LJ-61-WT
Item Name
LJ-61-BL
140-059-200
Item Code
140-050-031
147N
Retaining Force (pc)
147N
15kgf
15kgf
White 10pcs 120pcs
Carton
120pcs
Box
10pcs
Color
Black
■Bore Dimensions
M5M5
※
2-8.6 × 5.5
Mounting Plate A type B type
12
35.8
3(34)
1.5
1832
17(8
.3)
5
2235 (25)
0.8
15
15
0+11
3
2
5
※4
φ61.5
φ50
B24_BWB-D2A.EPS
43~555
70
68
30
6930
4-φ7.5
12
53
0
94
.6
120
34
1
7
3
6
2
5
4
No. Part Name Material Finish① Body Stainless Steel(SUS304) Mirror
④ Handle Zinc Alloy Chrome⑤ Cylinder Zinc Alloy Chrome⑥ Nut Stainless Steel(SUS304) Plain⑦ Cam Steel Yellow Zinc Chromate
② Cam Steel Yellow Zinc Chromate③ Mounting plate Steel Yellow Zinc Chromate
KeyType
Key Alike
Key Alike
Item Code
140-010-032
140-010-033
Item Name Spec.
WB-901503-D Anticlockwise
WB-901504-D Clockwise
No. Part Name Material Finish① Body Stainless Steel(SUS304) Mirror
④ Handle Zinc Alloy Chrome⑤ Cylinder Zinc Alloy Chrome⑥ Spring Steel Plain⑦ Cam Steel Yellow Zinc Chromate
② Cam Steel Yellow Zinc Chromate③ Mounting plate Steel Yellow Zinc Chromate
Item Code
140-010-034
140-010-035
WB-901551-D
WB-901552-D
B24_BWB-D3A.EPS
30~505
70
68
30
12
53
0
6930
94
.6
4-φ7.5
120
2
7
6
3
1
5
4
■Bore Dimensions
B24_BWB-D3B.EPS
79
94
.656
100R4
R2 R2
R8
R13
6925
˚
4-φ7
■Bore Dimensions
B24_BWB-D3B.EPS
79
94
.6
56
100R4
R2 R2
R8
R13
69
25˚
4-φ7
KeyType
Key Alike
Key Alike
Anticlockwise
Clockwise
20120501
Catch
es & L
atches
97
DCDAMPER CATCH
• Keeps cabinet doors from slamming shut.• Holds the door in closed position.• Available for wood and glass doors.• Non Handed.• Separate models for wood and glass doors.
Item Code Item Name Spec. Door Width Door Height Door Thickness Door Weight Weight Box Carton
140-021-697 DC-90 For Wooden Door 450 700 − 4kg 46g 25 200pcs
140-021-698 DC-90G For Glass Door 450 700 5 4kg 71g 25 200pcs
140-021-699 DC-100 For Wooden Door 600 900 − 7kg 66g 25 200pcs
140-021-700 DC-100G For Glass Door 600 900 5 7kg 91g 25 200pcs
Installation Position A B
Inset Door C- G1+ 3 24- G2
Outset Door C+ Overlay+ 3 Overlay+ 24
Installation Position A B
Inset Door 88- G1 24- G2
Outset Door Overlay+ 88 Overlay+ 24
No. Part Name Material Finish/Color① Body Polyacetal(POM)/PBT Dark Grey /Light Grey
② Trigger Polyacetal(POM) Dark Grey
③ Face Plate Zinc Alloy(ZDC) Chrome④ Spacer ABS Black⑤ Trigger Installation Jig PBT Light Grey
■ Installation
DC-90
DC-90
DC-100
DC-100
Item Code Item Name Weight Box
180-100-260 SDS-50G-CR 25g 50pcs
■ Face Plate (Sold Separately)
A 32
B
Door edge
Cut Out Dimension Door Upper Edge
15
2
PAT.PSUGATSUNE
Glass Door
4
(34.
5)
8
A
Door
Sid
e B
oard
Adjustment±3
Overlay
A
5
13
(52.7)
50
40
91
18.5 20
16
100~200(C)22~24
32
1
PAT.PSUGATSUNE
2
B
11
(34.
5)
Glass Door
(24)
16 SUGATSUNEPAT.P
2
1
Top
Boa
rd
Sid
e B
oard 20
B
A
50
98
(34.
5)
13
16(88)
(33) 20
BA 32
11
(34.
5)
5
8
5
Overlay
3
Door
Adjustment±3
715
.747.532
3
47.532 15
.744.9
4
Face Plate for Glass Door Application(Option)
DC-90 DC-100
G1 is the gap between the door edge and the side board. G2 is the gap between the edge of the door and the top board.
20120914
Catch
es & L
atches
98
SX-48
LC-PK32
QUICK RELEASE LATCH
QUICK RELEASE LATCH WITH LOCKING
• Snap-in installation.• Automatically latches when the panel is closed.• Release multiple latches simultaneously with temporary hold-open feature.
(No need to hold finger on latch when releasing)• All components are plastic and 304 stainless steel to provide high corrosion resistance.
• UL94-V0 rated flame retardant material.
• Keylocking style restricts access.• Single-hole, snap-in installation.• UL94-VO rated flame retardant material.• Non-corrosive materials.• Key is removable in locked position only.
No. Part Name Material Finish① Body Polyamide (UL94V-0) Silver② Latch Polyacetal (UL94HB) Silver- Spring Stainless Steel (SUS304) -
Item Code Item Name Panel Thickness Color Retaining Force (pc) Weight Box Carton
140-050-037 SX-48 0.8,1.0,1.2,1.6,2.0,2.3 Black 49N 5kg 11g 40pcs 400pcs
■ Use Multiple Latches
sx48d03.eps
■ Snap Into Panel ■ Cut Out Dimensions
■ Cut Out Dimensions
sx48d02.eps
■ Operation
■ Operation
■ Installation
■ Latch Body
■ Key
Locks when panel is closed. Hold-Open FeatureEach latch will hold in an openedposition allowing user to releasemultiple latches at the same time.
Lever & latch is reset when the panel opens.
SX48d01.eps
Panel Thickness
19
16.54813
11
(7)
(20.
1)
28
6.4
12.7
2
111
38
25.5
+0.50
0+0.5
1
2
No. Part Name Material① Body Polypropylene
② Latch PBT
③ Spring Stainless Steel (SUS304)
④ Key Zinc Alloy
Item Code Item Name Color Door Thickness Weight Box Carton140-020-694 LC-PK32-L-BL Black 1.2,1.5,1.6 6g 72pcs 720pcs140-020-695 LC-PK32-L-GR Grey 1.2,1.5,1.6 6g 72pcs 720pcs
Item Code Item Name Finish Weight Box Carton140-020-696 LC-PK32-K Nickel 7g 200pcs 2000pcs
■ Key (Sold Separately)
■ Latch Body
Panel Thickness
Panel Thickness
Panel Thickness
Panel Thickness
20120501
Catch
es & L
atches
99
LC-PK32
LC-PK32-K(Sold Separately)
RoHS
Color variations:Black,Grey
4 Major highlights. Add up to efficiency & security!
LC-PK32-L-GRLC-PK32-L-BL
NEW!
OPEN!OPEN!
Click!
11
22 33
unlocked
One touch installation Comes with locking function UL94-V0 rated flame retardant material
Multiple latchescan be easily removed
by one person
Easy latching & removal of panels
44
PANEL LATCH With Locking
Compact locking panel latch, yet full of innovations.
20120501
100
Catch
es & L
atches
SLIDING DOOR LATCH HC-30
HC-30R
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-183-251 HC-30 258 5 50 304 Stainless Steel, Brass, Zinc Alloy Satin
Item Code Item Name Weight (g) Box (pcs) Carton (pcs)140-022-282 HC-30R 280 5 50
Material Finish304 Stainless, Brass, Zinc Alloy Satin,Chrome
Bore Dimensions
Opposite Side
• Slim design suitable for various applications.• Non-Handed: Can be installed on left or right side.
• For door thickness 28 ~ 40mm.• For sliding doors only.
• Slim design suitable for various applications.• Non-Handed: Can be installed on left or right side.
• For door thickness 40 ~ 52mm.
1610.5
66 80 95
2.515
66 95 80 65
14.5
14.5
169
3053
3.2
15
65
30
15
33
φ42
40~52
2×φ4.5 φ7.5
φ48
φ41
37
807.
595
2.5
16
962
.4
3338.5
3.2
16.3
32
301.2
6.66.8
3
2
8095
3831
.5
6.5
14.3
1565
10
16 2.5
7.5
1
2
34
■Installation
SLIDING DOOR LATCH
20120501
101C
atches &
Latch
es
SLIDING DOOR LATCH W/INDICATOR HC-30H
HC-70SLIDING DOOR LATCH
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-183-250 HC-30H 259 5 50 304 Stainless Steel, Brass, Zinc Alloy 50
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-183-255 HC-70 197 5 50 304 Stainless Steel, Brass Satin
Bore Dimensions
Opposite Side
Installation
• Door latch with indicator.• Slim design suitable for various applications.• Non-Handed: Can be installed on left or right side.
• For door thickness 28 ~ 40mm.• For sliding doors only.
• Sliding Door latch for surface mount instllation.• Slide knob to lock and unlock.• Large knob for easy operation.• Non-Handed: Can be installed on left or right side.
• Slim design suitable for various applications.
20120501
102
Catch
es & L
atches
HC-70HSLIDING DOOR LATCH W/INDICATOR
HC-30LSLIDING DOOR LATCH
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-183-254 HC-70H 297 5 50 304 Stainless Steel, Brass Satin
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-183-253 HC-30L 309 5 50 304 Stainless Steel, Brass, Zinc Alloy Satin
Bore Dimensions
Opposite Side
Sample 1 Sample 2
Installation
Bore Dimensions
Opposite Side
• Sliding Door latch with indicator and large knob.• Slide knob to lock and unlock.• Slim design suitable for various application.• Large knob for easy operation.• Non-Handed: Can be installed on left or right side.• For door thickness 26 ~ 40mm.
• Sliding Door latch with large lever for easy operation.
• Slim design suitable for various applications.• Non-Handed: Can be installed on left or right side.• For door thickness 28 ~ 40mm.
20120501
103C
atches &
Latch
es
15.5
(1-3
1/32
")
HC-30HLSLIDING DOOR LATCH W/INDICATOR
SLIDING DOOR LATCH HC-65
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-183-252 HC-30HL 309 5 50 304 Stainless Steel, Brass, Zinc Alloy Satin
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-180-578 HC-65 41 20 200 304 Stainless Steel, Brass Satin
Bore Dimensions
Opposite Side
* Left-handed shown. This will be upside down in case of right-handed application.
Installation
• Sliding Door latch with indicator.• Large lever for easy operation.• Slim design suitable for various applications.• Non-Handed: Can be installed on left or right side.• For door thickness 28 ~ 40mm.
• Surface mount type door latch with noticeable indicator.
• Extra slim and compact design.• Simply slide up and down the knob to lock / unlock.• Non-Handed: Can be installed on left or right side.
20120501
104
Catch
es & L
atches
SLIDING DOOR LATCH HHC-85
SLIDING DOOR LATCH HC-85SS
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-170-774 HC-85SS 120 20 100 304 Stainless Steel, Brass Satin
Item Code Item Name Weight (g) Box (pcs) Carton (pcs) Material Finish140-180-000 HHC-85 120 6 30 304 Stainless Steel, Brass Satin
Installation
* Left-handed shown. This will be upside down in case of right-handed application.
Installation
* Left-handed shown. This will be upside down in case of right-handed application.
Opposite Side
• Sliding Door latch with indicator.• Slim design suitable for various applications.• Large lever for easy operation.• Non-Handed: Can be installed on left or right side.• For door thickness 26 ~ 38mm.
• Surface mount type door latch with noticeable indicator.
• Simply slide up and down the knob to lock / unlock.
• Slim design suitable for various applications.• Non-Handed: Can be installed on left or right side.
20120501