Catalogue #2 2009
Transcript of Catalogue #2 2009
• GENERATORS
• ENGINE DRIVE WELDERS
• ALTERNATORS
• PRESSURE WASHERS
• COMPACTORS
• POWER TROWELS
• ENGINE DRIVE PUMPS
catalogueISSUE:2
©
HO DELUXE SERIES
HO2000 H03000 HO3500
MODEL HO2000 HO3000 HO3500 HO5000 HO6500 HO7500 HO8500
MAX WATTS 1700 2400 2800 4500 5500 6500 7000
CONT. WATTS 1400 2000 2300 3400 4400 5200 6400
DC OUTPUT 12V-8.3A 12V-8.3A 12V-8.3A 12V-8.3A 12V-8.3A 12V-8.3A 12V-8.3A
NOISE LEVEL DBA - 10m 64 66 67 68 69 69 69
HONDA OHV ENGINE GX120 GX160 GX200 GX270 GX340 GX390 GX390
4.0HP 5.5HP 6.5HP 9.0HP 11.0HP 13.0HP 13.0HP
FUEL TANK CAPACITY 11.0L 11.0L 11.0L 17.0L 17.0L 17.0L 17.0L
AVERAGE HOURS RUN @ 75%AUTO THROTTLE OFF 15hrs 11hrs 9hrs 10hrs 8hrs 7hrs 7hrsAUTO THROTTLE ON* N/A N/A N/A 14hrs 12hrs 10hrs 10hrs
STARTING RECOIL RECOIL RECOIL RECOIL RECOIL OR RECOIL OR RECOIL OR
SYSTEM ELECTRIC* ELECTRIC* ELECTRIC*
DIMENSIONS - LENGTH 540 540 540 600 650 670 670- WIDTH 415 415 415 475 470 475 475- HEIGHT 430 430 430 510 520 520 520
DRY WEIGHT (KG) 35 40 45 65 77 85 85
P O W E R E D
®
2
HO
DE
LUX
E S
ER
IES
HO5000 HO6500 HO7500
*Electric start units available at extra cost.
3
Large capacity fuel tanks Full panel with outlets & voltmeter
Fuel tank protection rails
12 Volt battery charging
Low profile engine
Circuit breaker
Angle heavy duty anti-vibration mounts
Automatic Idle To Reduce Fuel Consumption,Noise and Engine Wear(HO5000+)
Prime Power’s Deluxe Range of Honda powered units provide product features that you want in portablepower. Genuine Honda engines with long range fuel tanks, full control panels with a volt meter, 12V batterycharging and power outlets PLUS the fuel saving automatic idle (on HO5000 upwards) makes this type ofunit sought after by tradesman and home owners alike.
The automatic idle function reduces the engine speed to an idle when there is no load (or current draw) onthe unit, automatically increasing the engine speed when a load is introduced. This not only saves fuel butalso produces less engine wear and reduces the overall noise of the unit.
HO DELUXE SERIES - HONDA POWERED
*SAVEFUEL!
P O W E R E D
®
4
RO
SE
RIE
S -
RO
BIN
MODEL RO2000 RO3000 RO3500 RO5000 RO6500 RO7500
Max Watts 1700 2400 2800 4500 5500 6500
Cont. Watts 1400 2000 2300 3400 4400 5200
DC Output 12V-8.3A 12V-8.3A 12V-8.3A 12V-8.3A 12V-8.3A 12V-8.3A
Noise Level DBA - 10m 63 65 66 67 68 68
Robin OHV Engine E12 E17 E21 E25 E36 E41
Horsepower 4 6 6 8.5 11.5 13.5
Fuel Tank Capacity (L) 11 11 11 17 17 17
Average Hours Run @ 75%Auto Throttle Off 15 11 9 10 8 7Auto Throttle On* NA NA NA NA 12 10
Starting RECOIL RECOIL RECOIL RECOIL RECOIL OR RECOIL OR
System ELECTRIC ELECTRIC
Dimensions - Length 545 545 545 600 650 670- Width 415 415 415 475 470 475- Height 465 465 465 510 520 520
Dry Weight (KG) 36 39 43 66 75 85
RO5000
Large Capacity Fuel Tanks • Large Silenced Muffler • Full Panel With Outlets & Voltmeter12 Volt Battery Charging • Automatic Idle To Reduce Fuel Consumption, Noise & Engine Wear
Prime Power also offers its deluxe range of productwith Robin petrol engines, with similar features tothat of the HO Honda Powered deluxe series. Bigfuel tanks, mufflers, control panels and sturdyframes make this set up great for those wantinglong run times with quieter operation.
Robin engines have traditionally been preferred byhire companies and construction contractors andhave a reputation for keeping up with harshtreatment.
Robin’s large capacity air cleaners improve the efficiency of the engine and along with extra large mufflersystem, noise levels are greatly reduced. Electronic ignition system and overhead valve design ensure thatthere is improved fuel consumption. This in conjunction with the automatic idle feature on the RO6500 andRO7500 make this unit an economical unit to both run and service.
RO2000 RO3000 RO3500
RO DELUXE SERIESROBIN POWERED
RO6500 RO7500
Electric start units available at extra cost.
5
PP
YB
AS
IC S
ER
IES
PPY6500
PPY3000
PPY BASIC SERIESYAMAHA POWERED
MODEL PPY3000 PPY5000 PPY6500
Cont. Watts 2000 3400 4400
Amps 10 13.5 19
Horsepower 6 10 12
Starting RECOIL RECOIL RECOIL
Fuel Tank Capacity 11 15 15
Approx Usage LPH 1.3 2.1 2.1
Dry Weight 36 40 55
Length 620 700 700
Width 330 520 520
Height 420 560 560
PPY5000
Electric start units available at extra cost. Fuel usage is approximate.
Prime Power offers Yamaha powered units in a similarconfiguration to that of the Robin and Honda deluxe units.Long range fuel tanks and quieter mufflers with arecognised engine make these units perfect for thecamper or trade user alike.
6
PH
BA
SIC
SE
RIE
S
Designed with our customers basic requirements in mind, Prime Power’s Basic Range provides an economicalalternative to that of the HO and RO Deluxe Series.
A comprehensive full range of Honda powered units with industrial features that include easy start electronicignition systems, cast iron cylinder sleeves, low oil protection, dual element air filters, double ball bearingcrankshafts in a genuine Honda overhead valve engine.
• All above units are rated @ 240v, 50Hz
• Electronic start modelshown
• 3 phase alternators alsoavailable
Basic Features• Standard fuel tanks, muffler
and air filtration system• Strong scoop or roll frame
with anti vibration mounts• Standard type power outlets• Standard two year warranty• Low oil level shutdowns
PH70E
PH33
PH120E
PH45
PH BASIC SERIES
MODEL PH 2.5 3.3 4.5 6.0 7.0 8.0 9.0 10.0 12.0 15.0
Watts Continuous 2000 2640 3360 4800 5600 6400 7200 8800 9600 12000
Amps 10 13.5 19 25 29 33.5 37.0 46 50 63
Horsepower 5.5 6.5 9 11 13 13 15 18 20 24
Starting R R R R* R* R* R* E E E
Fuel Tank Capacity 3.6 3.6 6.5 6.5 6.5 6.5 6.5 15/50 15/50 15/50
Approx Usage LPH 1 1.2 2.1 2.6 2.6 2.6 2.6 3.8 4.2 5.3
50Lt Fuel Tank Base Option N N N N N N Y Y Y Y
Dry Weight (kg) 36 40 58 75 76 82 90 110/130 120/140 135/155
Length 620 620 700 820 820 820 830/1042
Width 330 330 460 540 540 540 570/550
Height 420 420 490 500 500 500 700/700
* Also available in fuel tank base
P O W E R E D
®
R* - Electric start units available at extra cost.All units up to 8kva have recoil start, 10kva upward only electric start.
7
BU
ILD
ER
SW
OR
K S
PE
CS
For those contractors who have the requirementfor a serious generator that complies to work safepractices, Prime Power work spec generators areavailable in Honda engine options in all the basicset configurations.
Builders Work Spec units include all the standardbasic features along with the added benefits ofAustralian standard approved safety devices.
Builders Work Specifications• Vibration isolated IP66 weatherproof
earth leakage• Vibration isolated IP66 twin weather
proof power outlets• Heavy duty roll frame• Anti vibration mounts• Combination circuit breaker
PH60-BWS
PH33-BWS#
The auto stop start controller is available for all Honda Basicelectric start models and Yanmar diesel electric start portableunits.
For those who wish their Prime Power generator to either startremotely or via a multi function timer.
Features include:• Heat sensor on the muffler to operate the engine
choke when required• Time delay contactor to allow the engine to sufficiently
warm up, which stops voltage fluctuations at initial startup and stop
• Safety shutdown in the event of either lack of fuel or nooil (in diesel only) to protect your engine
Typical applications include:
Remote applications:• Bore pumps• Lighting applications• General situations where accessibility
of the unit is restricted• Solar power back up situations
Also available with auto mains failure that enables the userto have it set up to auto start should the power fail andelectricity be required and then turn itself off when the mainspower is restored.
BUILDERS WORK SPECS
AUTO STOP / START
P O W E R E D
®
# Scoop frame option shown.* Non weather proof outlet also available
8
DIE
SE
LS
ER
IES
DIESEL SERIES
1500 RPM WATER COOLED DIESEL'S
3000 RPM engine options available
Honda • Yanmar
Prime Power 3000 RPM diesel units have eitherauto decompression or lever, with pressurisedlubrication systems which allows easy starting andlong engine life. Strong frames and anti vibrationmounts ensure the unit can withstand rigoroushandling at both construction and home buildingsites. Reliable brushless alternators ensure astable power supply.
Prime Power also offers an extensive range of slow speed diesel units, from 3kva up to 800kva.
Features• Heavy Duty Skid Base• Compound regulated 4 pole
1500RPM alternators• Electric start• Battery cables & carrier• Power Outlets (standard on 1
phase only)
Options• Galvanised base & guard• Weather proof canopy• Weather proof outlets single or
three phase• Shutdown protection low oil
pressure / high water temp• Run down time clock• As above with pump pressure• Pivot shutdown
PHD60E
PYD50E
MODEL RATING PHASE ENGINE
GKDC3E 3 Kva 1 or 3 RK 70
GKDC4E 4 Kva 1 or 3 RK 95
GKDC5E 5 Kva 1 or 3 RK 125
GKDC10E 10 Kva Three ER 1900
GKDC10E 10 Kva Single ER 1900
MODEL RATING PHASE ENGINE
GYDC3E 3 Kva 1 or 3 TF 70
GYDC4E 4 Kva 1 or 3 TF 90
GYDC4.5E 4.5 Kva 1 or 3 TF 110
GYDC5E 5 Kva 1 or 3 TF 120
GYDC7.5E 7.5 Kva Three TF 160
GYDC7.5E 7.5 Kva Single TF 160
Kubota also available
MODEL PYD22 PYD50 PYD70 PHD60
Watts Continuous 1760 3600 5200 4400
KVA 2.2 4.5 6.5 5.5
Amps 9 18.5 29 23
Engine YANMAR HONDA
Horsepower 4.8 7 10 9
Starting RECOIL / ELECTRIC*
Fuel Tank Capacity 2.5 3.5 5.5 4.5
Approx Hours Run 3.8 3.5 3.6 3.2
Dry Weight 48 70 92 90
Length 750 820 820 820
Width 500 540 540 540
Height 550 600 600 600
* Also Cummins & F. G. Wilson sets available.
• Examples of 3 - 10kva machines •
* Electric start units available at extra cost.
Electric start units available at extra cost.
9
4 in
1W
OR
KS
TATIO
N
Prime Power’s rugged construction 4 in 1 workstation is a portable workshop suitable fortradesmen, handymen and farmers alike. Gutsy welding performance matched with aneconomical air compressor ensures that most jobs can be finished while out on site. Theauxiliary power also allows other hand tools to be utilised in an all in one Power/Welder/12vBattery charger compact package.
• Strong frame with the unit placed on rugged anti vibration mounts
• 10 stepped welding amp settings
• 200A welder
• 7kva AC auxiliary power with Honda petrol
• 10CFM air compressor
• 25lt air receiver which is removable from the frame
• 12v battery charger
Both Recoil & Electric Start Options Available
4 in 1 WORKSTATION
MODEL PWSH200AC PWSYD180AC
Welding Current AC AC
Max Amps 180 180
Engine HONDA YANMAR
Horsepower 13 10
Duty Cycle @ 180A/200A 60% 40%
Duty Cycle @ 140A 100% 100%
240V Aux. Output 7KVA 6KVA
Air Compressor 10CFM / 25Lt Air Receiver
Watts Continuous 5600 4800
Battery Charging Yes Yes
Starting Recoil / Electric* Recoil / Electric*
Fuel Tank Capacity 6.5 4.5
Approx Hours Run 2.6 3.2
Dry Weight 120 140
Length 960
Width 700
Height 700
P O W E R E D
®# 5M & 10M WELDING KITS ARE ALSO AVAILABLE
* DC WELDING UNIT ALSO AVAILABLE
* Electric start units available at extra cost.
10
EN
GIN
ED
RIV
EN
WE
LDE
RS
ENGINE DRIVEN WELDER GENERATOR
HONDA
Prime Power direct coupled engine drive weldersoffer excellent “on site” performance utilising boththe stepped amperage welder and high auxiliarygenerator power. The units have a simple weldingcurrent adjustment to ensure optimum welding foreach electrode type and welding job.
Easy plug and play welding terminals allow goodconnection and easy storage of welding cables. Allunits are supplied with an auxiliary power outletsufficient to operate most hand power tools andother workshop machinery.
Prime Power has engine drive welders availablein both petrol and diesel engine options
DIESEL - HONDA - YANMAR
• 3000 RPM air cooled alternator• Fitted with thermal overload protection
MODEL PWH200 PWHV200
Welding Current AC DC AC DC
Max Amps 180 200
Engine HONDA
Horsepower 13 18
Duty Cycle @ 180A/200A 60% 40%
Duty Cycle @ 140A 100% 100%
240V Aux. Output 7KVA 4KVA 7KVA 4KVA
Watts Continuous 5600 3200 5600 3200
Battery Charging Yes No Yes No
Starting Recoil / Electric* Electric Only
Fuel Tank Capacity 6.5 18
Approx Hours Run 2.6 4
Dry Weight 80 120
Length 820 830
Width 540 570
Height 500 700
Model PWYD180 PWHD170
Welding Current AC DC AC DC
Max Amps 180 180 170 170
Engine YANMAR HONDA
Horsepower 10 10 9 9
Duty Cycle @ 180A/200A 60%
Duty Cycle @ 140A 100%
240V Aux. Output 6KVA 4KVA 5KVA 4KVA
Watts Continuous 4800 3200 4500 3200
Battery Charging Y N Y N
Starting Recoil / Electric* Recoil / Electric*
Fuel Tank Capacity 5.5 4.5
Approx Hours Run 3.6 3.2
Dry Weight 90 88
Length 820
Width 540
Height 500
*Electric start units available at extra cost.
*Electric start units available at extra cost.
11
ME
CC
ALT
E3000 RPM Brushless Alternators
• Brushless and Brush Machines• AVR and Compound Control• Single Bearing and Bare Shaft 2 bearing• PTO Drive• Single phase• Three phase
These larger frame units rangefrom 8kva to 2500kva and aremade from the highest qualitycomponents to give you astrong, heavy duty, reliablemachine.
Meccalte alternators give youone of the most reliable, bestperforming and value formoney alternator in the market.
The Meccalte Australasian office, in Adelaide South Australia, hasbeen a long time supporter of Prime Power, with 20 plus years ofcontinued involvement and co-operation. Prime Power andMeccalte are proud of this long association as it shows the desire tofully support past and future dealing with our Australian customers. PTO Tractor Pack
1500 RPM 4 Pole Alternators
MECCALTE ALTERNATORS
• Capacitive Control
• Single Bearing and Bare Shaft 2 bearing
• Single phase available
• Three phase available
The unique and light weightaluminium constructionmakes these machineseasy to move or mount.
Alternators to suit almostevery tapered shaft engineare available. Units aresupplied with a circuitbreaker and power outlet ifrequired.
Residual current devices caneasily be fitted at an additionalcost upon request.
Prime Power strongly supports the use of Meccalte alternators on many of its units. Meccalte offersclean power with 24 month warranty which is supported by a nation wide service network, to give youpeace of mind with your Prime Power unit purchase.
2 bearingalternator
2.5kva shown
7kva shown
12
BA
SIC
GE
NE
RAT
OR
S
BASIC GENERATOR PRINCIPLES
Accessories available on Prime Power Units on request:• 2 & 4 wheel kits• Lifting eyes on roll over frames• Earth leakage & weather proof outlets• 18Lt & base mounted fuel tanks• Auto stop/start & auto mains failure systems
KVA = WATTS#
1.0kva x 0.8 = WATTS
WATTS = KVA#
1400W x 1.25 = KVA
APPROX 4.2a per kva
To work out KVA required use start currentthen divide by 2, then divide x4.2
example: 42a ÷ 2 = 21a21a ÷ 4.2 = 5KVA
POWER TOOLS UP TO 2200W*, LIGHTING, MICROWAVEOVEN, HEATING, TV, RADIO, TOASTER, BENCH GRINDER,EMERGENCY POWER OR HANDYMAN JOBS
ALL OF THE ABOVE PLUS LARGER ELECTRIC MOTORS*,SMALL OVEN, ELECTRIC PUMPS*, LARGE FRIDGE, IRON,SMALL HEATER FAN, 9” ANGLE GRINDER, CIRCULAR SAW 9”.
ALL OF THE ABOVE PLUS CEMENT MIXER, LARGEGRINDERS, WASHING MACHINE, IRON, LARGEFRIDGE/FREEZER, MOST 1HP MOTORS*.
ALL OF THE ABOVE, SMALL HOME BUILDING SITES, AIRCONDITIONER*, BRICK SAW, 10CFM AIR COMPRESSOR.
ALL OF THE ABOVE PLUS 140AMP WELDER*, LARGEMOTORS UP TO 2HP, LARGER HOME, MOST LARGERWORK SITES, 12CFM COMPRESSOR.
ALL OF THE ABOVE PLUS BETTER MOTOR STARTER UP TO 2.5HP*,14CFM COMPRESSOR.
ALL OF THE ABOVE PLUS HEAVY DUTY EQUIPMENT, TWIN VACUUMCLEANERS, 160AMP WELDERS, 3HP MOTORS*, WOOL PRESS ANDSHEARING PLANTS.
ALL OF THE ABOVE PLUS EASY STARTER FOR ELECTRIC MOTORS*,BIG WORK SITES, SMALL SHOP FOR BACK UP, 180AMP WELDERS.
ALL OF THE ABOVE PLUS MOTORS UP TO 5HP*, 180>200 AMPWELDERS, WORKSHOPS.
ALL OF THE ABOVE PLUS MOTORS UP TO 5HP*, 200>220 AMPWELDERS, CONSTRUCTION SITES AND LARGE SHOPS FOR BACK UP.
ALL OF THE ABOVE PLUS BIG JOBS LIKE STARTING MULTIPLEMOTORS*.
2.5KVA(2200W)
3.3KVA(2600W)
4.5KVA(4000W)
6.0KVA(5500W)
7.0KVA(6500W)
8.0KVA(6800W)
9.0KVA(7200W)
10KVA(8000W)
11KVA(9000W)
12KVA(10000W)
15KVA(12000W)
* Drills and small saws must be brush type motors with no excess starting load, all otherelectric motors see your dealer for advice. Electronic welders often take more powerKVA to correctly operate. Check with your welder manufacturer for theirrecommendation with this type of product.The above table should be used as a guide only. Product specifications vary frommanufacturer to manufacturer.
The above table should be used as a guide only. Product specifications vary frommanufacturer. Prime Power accepts no responsibility for generators chosen purely usingthis basic guide. At all times you must refer to the manufacturer of the product to beoperated by a generator for the correct sizing of machines.
HO + RO2000/3000
HO + RO3500
HO + RO5000
HO + RO6500
HO + RO7500
# Will depend on power factorand type of alternator.All above calculations are aguide only.
* Single Phase.
13
PR
ES
SU
RE
WA
SH
ER
From driveways to mechanical equipment, Prime Power pressurewashers provide the power to clean faster, and more efficiently,ensuring your property is kept in pristine condition. Pressure washersremove built up mould and grime, dirt and grease to restore surfaces totop condition within a fraction of the time compared to a normal hoseand brush.
Your Prime Power Pressure Washer can be either hooked up to yourgarden hose or to a water storage tank. The units are compact and lightbut strong in design. The frames are powder coated with fold downhandles, with pneumatic wheels for easy manoeuvrability and storage.
PRESSURE WASHER
Pressure Washer Model PPW 2700 PPW 3000 PPW 3600
Peak Pressure (PSI/bar) 2700/183 3000/204 3600 / 245
Flow (LPM) 11.5 13.5 15.0
Engine Honda GX160 Honda GX 270 Honda GX 390
Hours run @ 75% load 3.5 3.0 2.5
Max power output (hp) 5.5 9.0 13.0
Fuel Tank Capacity (L) 3.6 6.5 6.5
Gross Weight (kg) 34 65 68
Dimension (mm) 730 x 555 x 542 850 x 670 x 630 850 x 670 x 660
Specifications correct at time of printing but may change without notice. E&OE.
P O W E R E D
®
Electric start units available at extra cost.
14
CO
MPA
CTO
RS
/ PO
WE
R T
RO
WE
L
• Ductile iron base plate provides better durability
• Open plate provides self cleaning
• Radius base plate for easy access to corners
• Centrally located lifting bar allows easy transport
• Sealed belt cover to prevent sand and soil entering
COMPACTORS
Technical Specifications PPC10 PPC20
Plate Size (cm) 50 x 36 46 x 61
Dimension (cm) 108 x 40 x 80 110 x 46 x 66
Weight (kg) 64 94
Frequency (vpm) 5600 7000
Centrifugal Force (kn) 10.5 19.8
Compaction Depth (cm) 20 30
Travel Speed (cm/s) 40 45
Efficiency (m2/hr) 450 770
Engine Air cooled, single cylinder
Engine Model Petrol, Honda GX160
Power (hp) 5.5 5.5
P O W E R E D
®
Prime Power’s Walk Behind PowerTrowel powered by Honda issuitable for contractors wishing asuperior finish to larger jobs.
POWER TROWEL Optional:
Finishing Blade
Combination Blade
Walk Behind Power Trowel LowMaintenance and Long Life Design
Technical Specifications Power Trowel
Engine Type Petrol, Honda GX160
Power (hp) 5.5
Weight (kg) 75
Rotor Diameter (cm) 90
Number of Blades 4
Finish Blades (cm) 15 x 35
Combination Blades (cm) 20 x 35
Pans (cm) 98
Dimension (cm) 100 x 100 x 50
PPC20
PPC10
15
EN
GIN
E D
RIV
EN
PU
MP
S
FIRE FIGHTINGPP15STThis series has a quality wet end that is capable of larger flows than normal by usingan open style impellor. Cast iron internals make this hard to beat. Fully replaceablesuction and discharge ports, along with a full roll frame make this an excellent unit forthe farm or rural home owner.
Also available with an 11L fuel tank to give extended run time which is great if youwant to move water from dam to dam, or tank to tank.Both Honda and Robin available in this option.
Model PP15ST PP15LRT
Engine Honda GX160, 5.5hp, Recoil Start Honda GX160, 5.5hp, Recoil Start
Fuel Tank Capacity (L) 3.6 11
Suction Size 1.5” 1.5”
Discharge Size 1 x 1.5” / 2 x 1” 1 x 1.5” / 2 x 1”
Max Head (M) 50 50
Max Flow Rate (L/min) 500 500
Pump Body Alloy Alloy
Fluid Handling Water Water
Weight (Kg) 26 26
PP15-LRTPP15-ST
PP15ST-R PP15LRT-R
16
TR
AN
SF
ER
PU
MP
S
ENGINE DRIVE TRANSFER PUMPS
1” TRANSFER PUMPThe 1” transfer pump has a carry handle and issupplied with viton seals as standard, making itsuitable for diesel fuel transfer.
• Self-priming
• Lightweight at 5.5kg
• Includes sturdy rubber mounted base and carry handle
Model PP010
Engine Honda GX25, 1.1hp, Recoil Start, 4 stroke
Fuel Tank Capacity (L) 0.65
Suction Size 1”
Discharge Size 1”
Max Head (M) 36
Max Flow Rate (L/min) 130
Pump Body Alloy
Fluid Handling Water
Weight (Kg) 5.5
2”, 3” & 4” TRANSFER PUMPPrime Power’s 2”, 3” and 4” transfer pumps use either Honda or Robin engines, giving greaterchoice. Roll frames, couplings and fully repairable pump ends make this an excellent unit forfarm work or other commercial applications.
Model PP020 PP030 PP040
Engine Honda GX160, 5.5hp, Recoil Start, 4 stroke Honda GX160, 5.5hp, Recoil Start, 4 stroke Honda GX240, 8.0hp, Recoil Start, 4 stroke
Fuel Tank Capacity (L) 2.5 3.6 6
Suction Size 2” 3” 4”
Discharge Size 2” 3” 4”
Max Head (M) 32 32 31
Max Flow Rate (L/min) 580 1000 2100
Pump Body Alloy Alloy Alloy
Fluid Handling Water Water Water
Weight (Kg) 23 27 43
This range of product available from Prime Power allows maximum water transfer fordewatering or tank filling purposes
17
TR
AS
HP
UM
PS
Model PP020T PP030T PP040T
Engine Honda GX160, 5.5hp, Recoil Start Honda GX240, 8.0hp, Recoil Start Honda GX340, 11.0hp, Recoil Start
Fuel Tank Capacity (L) 3.6 6.5 6.5
Suction Size 2” 3” 4”
Discharge Size 2” 3” 4”
Max Head (M) 27 30 28
Max Flow Rate (L/min) 600 1400 2200
Pump Body Alloy Alloy Alloy
Fluid Handling Water Water Water
Weight (Kg) 31 52 67.5
ENGINE DRIVE TRASH PUMPSPrime Power’s range of rugged trash pumps are suitable for multiple uses, fromconstruction sites to on farm applications.
Available in 2”, 3” and 4”, this range ofengine drive pumps has quick release frontbodies to give 100% access to the internalsof the pump to clear any debris, removingthe need to disconnect any pipe work.
With flows from 680lpm up to 2200lpmthere is sure to be a pump to suit. Allpump units come with roll frames, non clogopen impellors, high quality casings andare available in either Honda or Robinengine configurations.
PP030T
PP040T - Honda
18
EN
GIN
E D
RIV
EP
UM
PS
ENGINE DRIVE PUMPS - ROBIN
ENGINE DRIVE PUMPS - HONDA
Prime Power’s range of rugged Robin powered pumps are suitable for multipleuses, from construction sites to on farm applications.
Also offered are Honda powered twin impellor, high head fire fighting pumps.Replaceable cast iron suction/discharge ports make this a robust pump all ina full roll over frame. Suitable for general farm use or town applications.
Available in 2”, 3” and 4”,this range is available inRobin powered engines
Available in both StandardTransfer and Trash Pumpconfiguration.
PP020T-RPP020-R
PP15ST-R
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600l/min
Hm LTF40C2
19
CU
RV
ES
300 600 900 1200 1500 1800 2100 2400
5
10
15
20
25
30
35
40
45
50
Pumping Capacity (L/min)
Tota
l Hea
d (
m)
0
PP010
PP020
PP030
PP040
100 200 300 400 500 600 700 800
5
10
15
20
25
30
35
40
45
50
Pumping Capacity (L/min)
Tota
l Hea
d (
m)
0
PP15ST
300 600 900 1200 1500 1800 2100 2400
5
10
15
20
25
30
35
40
45
50
Pumping Capacity (L/min)
Tota
l Hea
d (
m)
0
PP020T
PP030T-2
PP040T
TR
AS
H P
um
pC
urve
sF
IRE
Pu
mp
Cur
ves
TR
AN
SF
ER
Pu
mp
Cur
ves
PO
LY T
RA
NS
FE
RP
UM
PS
59 Langford Street, POORAKA SA 5069 Phone: (08) 8349 6333
[email protected]: (08) 8349 5226
AVAILABLE FROM
Whilst all endeavour is made in the preparation of this catalogue, specifications may change in keeping with our policy to continually improve ourproducts. Prime Power does not warrant the accuracy or completeness in this publication and reserves the right to alter specifications without notice.To the extent permitted by law, Prime Power excludes all liability, including negligence, for any loss incurred in reliance with this publication.
For warranty considerations the engine must go to an authorised warranty repair agent as prescribed by the actual brand of engine. For alternatorconsiderations the unit must be returned to an authorised repair agent. Information of these agents is available on request.
Warranty terms and conditions are also available on request, and will depend on the actual product purchased.
POLY TRANSFER PUMPS
PP20 -PLIf you are looking for an engine drive pump totransfer liquids not normally pumped by tradi-tional metal pumps, look no further.
Prime Power has a 2” Poly Transfer Pump thathas a flow of over 500lpm and a max head of32m. Viton seals, stainless bolts all with a5.5HP Honda are standard with this unit.
The pump is supplied with an intergrated han-dle for easy lifting, with pump internals thathandle various liquids for around the farm.Sea water and saline ground water are alsoable to be successfully moved.
2”
PP80GPT - ECONOMY TRASHIf you are wanting an economy type 3” trashpump then you will be happy with this trashpump from Prime Power.
Using a 5.5HP engine, this unit is capable ofmoving 1000 lpm. Solids 25mm are able to bepassed through its waterways allowing thispump to be used on construction sites needingdewatering or for use in irrigation.
Roll frames and genuine Honda engines makethis an excellent pump for any applicationneeding a trash type pump