Full Catalogue 2009

Wiring Accessories2009W

iring

Acc

esso

ries

200

9

ZD 028 INT-09

�

From Single Product to Complete System

Hager products continue to provide solutions. When we

started our company over 50 years ago, we set out a

simple tenet, which remains intact to this very day. This

is to make a technological contribution to enhancing

our standard of living, by developing safe, secure,

economical and stylish products. This philosophy has

been applied to our new range of wiring accessories.

This independent status means that we can continue

to make strategic investments within the business, to

ensure we meet the needs of a continuously developing

global market place.

WEST MEETS EAST- SYSTEM 10088Interesting things always happen when different minds relate to each other. New exciting artistic directions are found when we try to get a deep understanding of our neighbors’ work, instead of looking for truth only in our own personal history.

As a European designer I am clearly aware of the design values we have been building up for more than a century in this continent. But I am even more lucky to travel all over this planet. My encounter with Asia and particularly China is a very intensive one. A great ancient Culture looking towards the future. Too many impressions to talk about here.

The design of 10088 is my personal tribute to “West meets East”.

Product Designer:Erwing Van Handenhoven

�

Design Awards

Hager sets the highest possible standards for Wiring

Accessories design, engineering and production.

This quality and design excellence is reflected in the

Design Awards hager has received for it’s ranges in

France, Germany, UK & Australia.

Product design award 2007

Australian design award 2006

Trophées innovation award 2006UK Product design award 2008

�

AFAQ Intertek

Certification

In line with the Hager policy of

continuing to listen to the market

and activity support, the needs of the

customer, Hager continues to make

major investments in independent

certification of its products.

With this policy in mind Hager has

made the commitment to have its new

range of wiring accessories tested by

international recognised test houses.

It is through Hager's desire to support

customer needs and take a professional

approach that customers of the new

wiring accessory range can be confident

in the compliance of products to their

respective standards.

NEMKO PSB

�

6

Make the switch

NNNNNNNNN7

Unique design❏ Slim front plate

❏ Combination of gloss and matt fi nish

Shutter❏ All sockets equipped with shutters preventing single object intrusion

❏ Safe for your children

Removal slot❏ No damage to the wall when removing

Blue LED❏ Location or ON indicator

Screws in one direction ❏ Easier for installation

Cover with gold or sliver strip❏ More choice for your decoration

Available in four colours

Glow in dark❏ Grow in dark (4-5 hours)NNNN

�

The large convex rocker switch feature provides a subtle feel when switching.

The product is available in a full range of colours and finishes, which ensures

the compatibility of the switches with the interior design. The changeable

clip on cover enables you to mix and match to create your own product

character.

The unique "Blue Mechanism" represents Hager's Professional products in

order to ensure quality and safety. System 100��* has obtained the British

certificate under the International Third Party Laboratory Nemko UK.

The system 100�� with

large convex rocker

switch is designed for

distinctive appearence

in environments such as

hotels, offices or homes.

System 100��

System 100��

9

Wall switches P.10

Bell switches P.11

Dimmer and control switches P.11

Double pole control switches P.12

32A & 45A double pole control switches P.12

Cooker control unit P.12

Special marked units P.13

Hotel range P.13

Communication & data P.14

13A socket outlets P.15


15A and 16A socket outlets P.16

Shaver socket P.16


Accommodation plates and modules P.17

Fused connection units P.1�

Connection units P.1�

Others P.19

Mould blank plates P.19

Colour 100�� P.20

Decoration cover P.21

10

Wall switches

Description Pack Cat Qty. Ref.

Large dolly switches with fluorescent strips 10AX1 gang 1 way, large dolly 10 WGL111

1 gang 2 way, large dolly 10 WGL112

1 gang intermediate large dolly 10 WGL101





Large dolly switches with LED 10AX 1 gang 1 way, large dolly 10 WGL111N

1 gang 2 way, large dolly 10 WGL112N





Large dolly switches with fluorescent strips 20AX 1 gang 1 way, large dolly 10 WGL211






Large dolly switches with LED 20AX 1 gang 1 way, large dolly 10 WGL211N






• Complies with BS EN 60669-1, a.c only IEC 60669-1 CB certificate

• 'X' rated - No need to derate for fluorescent loads

• Supplied with M3.5 x 25mm long fixing screws

• Switches available with Blue LED for illuminated identification in a dark environment

• All switches with LED are pre-wired as location indicator

• All switches without LED have glow in the dark fluorescent indicators

• Capacity of each terminal: 3 x 1.5mm2

2 X 2.5mm2

• Two way switches can be

wired either 1 way or 2 way • Terminal markings denote: L1 = one way L2 = two way C = common

• Material: Polycarbonate

WGL121/ 122WGL111/ 112

WGL131/ 132

WGL111/ 112N WGL121/ 122N

WGL131/ 132N

WGL101

WGL231/ 232

WGL221/ 222WGL211/ 212

WGL231/ 232N

WGL221/ 222NWGL211/ 212N

11

Bell switches

• Complies with BS EN 60669-2-1 IEC 60669-2-1 CB certificate


• Capacity of each terminal: 3 x 1.5mm2 conductors

• Dimmers can control incandescent lamps only


WGLD600


Dimmer and fan control switch600W 1 gang, large dolly 10 WGLD600Dimming switch with neon (cycle action)


Bell switches single pole 10A

Marked bell large dolly 10 WGL11B

Marked press large dolly 10 WGL11P

• Complies with BS EN 60669-1

• Bell push / press can be wired to make 250V a.c.


• With fluorescent strip


2 X 2.5mm2


Dimmer and fan cont rol switch

WGL11B

WGL11P

12

Double pole control switches

• Complies with BS EN 60669-1, a.c. only IEC 60669 CB certificate


• Capacity of each terminal: L, N: 1 x 16mm2

E: 2 x 16mm2



Double pole control switches20AX 1 gang, large dolly with (RED) neon 10 WGL2D1N

20AX 1 gang, large dolly 10 WGLD2D1WGL2D1N


Double pole control switches32A with (RED) neon 10 WGR32D1

45A with (RED) neon 10 WGR45D1

45A DP cooker unit (size 2) 10 WGR45D2WGR45D2

WGR32D1WGR45D1

WGR45CCU


Double pole cooker control unit45A cooker control unit (size 2) 5 WGR45CCU

• Complies with BS EN 60669-1, a.c. only IEC 60669-1, CB certificate

• Supplied with M3.5 x 25mm long fixing screws and screw caps

• Capacity of each terminal: L, N: 1 X 16.0mm2

E: 2 X 16.0mm2

• Material: polycarbonate

• Complies with BS 4177, a.c. only

• Combined switch / sockets have double pole 45A main switch & 13A switched socket outlet


• Capacity of each terminal: L, N: 1 x 16mm2 E: 1 x 10mm2

• Marking on cooker control units: ON, OFF and circuit identification cooker and socket


Cooker control unit

32A and 45A double pole control switches

WGLD2D1

13

Special marked units


Double pole control switch with special marking 20AX 1 gang, large dolly with (RED) neon 10 WGL2D1WHmarked "Water Heater"

WGL2D1WH

Special marks Abbreviation"Air Conditioner" - AC"Cooker Hob" - CB"Cooker Hood" - CH"Computer Power" - CP"Dryer" - DR"Dish Washer" - DW"Fridge" - FR"Oven" - OV"Water Heater" - WH"Washing Machine" - WM

Surcharge applies

Hotel range

WGHKT

WGHDC WGHBD

WGHKTCARD

• Complies with BSEN 60669-1 • Supplied with M3.5 x 25mm long fixing screws



Hotel rangeKey tag switch with key card (time delay 60s) 5 WGHKT

Key card only 5 WGHKTCARD

"DND" & "Please clean up" switches with (RED) neon 10 WGHDC

"DND" & "Please clean up" indication box with door bell switch 10 WGHBD

14

Communication and data




Communication and dataTelephone outlet (BS style master) 10 WGT1M

Telephone outlet (BS style slave) 10 WGT1S

TV co-axial outlet 10 WGTV75

TV/ FM splitter isolator SCV outlet (size 2) 10 WGTVFM2 (blank plate only)

RJ45 data outlet (1 mod) Cat 5e 10 WGT1RJ5

RJ45 data outlet (2 mod) Cat 5e 10 WGT 2RJ5

RJ45 data outlet (1 mod) Cat 6 10 WGT1RJ6

RJ45 data outlet (2 mod) Cat 6 10 WGT2RJ6

RJ11 + RJ45 data outlet 10 WGTD

RJ11 data outlet (1 mod) 10 WGT1RJ

RJ11 data outlet (2 mod) 10 WGT2RJ

RG6 cable TV outlet 10 WGTV75F

Branching terminal 5-pair tel. terminal 10 WGTBT5

WGT1M WGT1S

WGTV75

WGT1RJ5WGT1RJ6

WGT2RJ5WGT2RJ6

WGTD WGT1RJ

WGT2RJ

WGTVFM2

WGTBT5

WGTV75F

15

13A socket outlets

• Complies with BS 1363 Pt 2, a.c. only SS145

• All terminal screws upward facing for ease of installation


• Capacity of each terminal: L, N: 2 x 4.0mm2

E: 3 x 2.5mm2

• Integral rocker design of switched sockets provide clear red 'on' indication

• Tough plastic back for durability



Socket outlets 13A single unswitched 10 WGS113

13A double unswitched (size 2) 5 WGS213

13A single switched 10 WGS113S

13A double switched (size 2) 5 WGS213S

13A single switched with neon 10 WGS113N

13A double switched with neon (size 2) 5 WGS213N

WGS113

WGS213

WGS113S

WGS213S

WGS113N

WGS213N

* Socket are with FREE dust preventive sticker to give additional protection during installation* Sockets with red dolly are also available

Dust preventive sticker

• Complies with BS 546 SS472



E: 4 X 1.5mm2




Socket outlet 5A round pin switched 10 WGS105S

WGS105S

5A socket outlet

16

15A and 16A socket outlets


Socket outlets 15A round pin unswitched,with shutter 10 WGS115

15A round pin switched,with shutter 10 WGS115S

German style sockets 16A German style socket (without shutter) 10 WGS116

16A German style socket (with shutter) 10 WGS116S

• Complies with BS 546 SS 472 IEC 60��4 (for WGS116/ 116S)



E: 3 X 2.5mm2



WGS115 WGS115S

WGS116WGS116S


Shaver socket 115V /230V [20VA] (size 2) 1 WGS200

• Complies with BS EN 6155�-2-5 IEC 6155�-2-5 CB certificate


• Designed for use in bathrooms and washrooms and incorporates a double wound isolating transformer for an earth free supply.

Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets rating 20VA on either voltage


• Primary circuit is protected by a self-resetting thermal overload device. Insertion of shaver plug automatically switches on the transformer, removal automatically switches it off. A positive interlock prevents 2 plugs being inserted simultaneously


WGS200

Shaver socket

17

• Complies with IEC ��4-1 BS 5733 (for WGS10IS)



E: 3 X 2.5mm2




Socket outlets 16A 3 pin unswitched universal socket,with shutter 10

10A 2 pin switched universal socket,with shutter 10 WGS10US

16A 3 pin unswitched twin universal socket,with shutter 10 XS9 322P

10A switched multi international socket,with shutter 10 WGS10IS

10A-16A socket outlets

XS9321P

WGS10US

XS9322P

WGS10IS


Euro accomodation plates Accommodation plate (for 2 modules) 20 WGVE2

Accommodation plate (for 3 modules) 20 WGVE3

Remarks: 1 module = 22.5mm X 45mm

Modules 10A multi international socket ,with shutter 45mm x 45mm, 10 WGSM10I

16A 2 pin Euro American socket ,with shutter 22.5mm x 45mm 10 WGSM216EA

16A 3 pin Euro American socket ,with shutter 45mm x 45mm 10 WGSM16EA

16A 3 pin Twin Euro American socket ,with shutter 45mm x 67.5mm 10 WGSMT16EA

13A BS socket ,with shutter 45mm x 45mm 10 WGSM113

Accommodation plates and modules

WGVE2 WGVE3

WGSM10I

WGSM216EA

WGSM16EA

WGSMT16EA

WGSM113

WGS10US

XS9 321P

1�


Connection unit 25A connection unit with flex outlet 10 WGR25

WGR25

• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws

25A connection unit • Capacity of each terminal: L, N: 2 x 6.0mm2

E: 2 x 6.0mm2


Connection unit


Fused connection units13A fused with flex outlet 10 WGR13

13A switch fused with flex outlet 10 WGR13S

13A switch fused with neon and flex outlet 10 WGR13SN

• Complies with BS 1363 Pt 4, a.c. only

• Cable clamp accommodates up to 2.5mm2 flexible cord


• All switched units are double pole


E: 2 X 4.0mm2

• All units fitted with a 13A fuse link to BS 1362, can be supplied with 2A, 5A fuse link.


• Optional flex outlet - for choice of use

WGR13 WGR13S

WGR13SN

Fused connection units

19

Others

WGD001


Door chime • Complies with BS EN 60335-1, IEC 60669-1 10 WGD001

• 250V AC or 4.5V DC (AAA x 3)

• Frequency 50 Hz

• With adjustable melody/ ding dong sound



Blank plates Blank plate (size 1) 20 WGV1

Blank plate (size 2) 10 WGV2

WGV2



WGV1

Moulded blank plates

20


Only sell separately Clip on cover Carbon (size 1) 40 WGC1CA

Clip on cover Carbon (size 2) 20 WGC2CA

Clip on cover Titanium Grey (size 1) 40 WGC1TG

Clip on cover Titanium Grey (size 2) 20 WGC2TG

Clip on cover Mother of Pearl (size 1) 40 WGC1MP

Clip on cover Mother of Pearl (size 2) 20 WGC2MP

Clip on cover with Gold strip (size 1) 40 WGC1-GD

Clip on cover with Gold strip (size 2) 20 WGC2-GD

Clip on cover with Silver strip (size 1) 40 WGC1-SV

Clip on cover with Silver strip (size 2) 20 WGC2-SV

Clip on cover Whtie (size 1) 40 WGC1

Clip on cover White (size 2) 20 WGC2

Decoration cover

WGC1TG

WGC1CA WGC2CA

WGC1-SV WGC2-SV

WGC1-GD WGC2-GD

WGC1 WGC2

WGC2TG

WGC1MP WGC2MP

21

Colour 100��

WGL 111MPWGL111TGWGL111CA

CA: Carbon TG: Titanium Grey MP: Mother of Pearl

WGL111CA

System 100��(A). Colour Code & Reference*** All below colour for System 100�� only.

Item Colour Reference Colour Code 1 Carbon CA2 Titanium Grey TG 3 Mother of Pearl MP

(B). Ordering1. If whole product is in WHITE colour:

Reference Clip on cover ProductEg: WGL111 White White

2. If whole product is colour sprayed:

Eg: Reference Clip on cover Product WGL111CA Carbon Carbon

WGL111

WA Product Ref. Colour Ref.

WG _________ _____

Colour specially for system 100��

22

With System 8000 we have developed a very slim front plate with modern

aesthetically pleasing curves, the fixing screws are concealed by integral

plastic caps, which ensure the product has a very clean look. The front plate

colour is cool white, which provides a shiny clean finish for the modern home

or office design. The very distinctive integral rocker "ON" indication ensures

complete confidence in contact position.

The unique "Blue Mechanism" represents Hager's Professional products in

order to ensure quality and safety. System 8000* has obtained the British

certificate under the International Third Party Laboratory Nemko UK.

System 8000

System 8000

23

Wall switches P.24

Bell switches P.24

Dimmer switches P.25

20A double pole control switches P.25




Communication and data P.27






Fused connection units P.31

Connection units P.31

Lampholders P.32

Mounting box P.33

24

Wall switches

• Complies with BS EN 60669-1, a.c only IEC 60669-1 CB certificate • 'X' rated - No need to derate for fluorescent loads


• Capacity of each terminal: 3 x 1.5mm2 2 X 2.5mm2

• Two way switches can be wired either 1 way or 2 way

• Terminal markings denote: L1 = one way L2 = two way C = common


• Complies with BS EN 60669-1 IEC 60669-1



• Capacity of each terminal: 3 x 1.5mm2 2 X 2.5mm2



Bell switches single pole 10A Marked bell 10 XP8910

Marked press 10 XP8911

Bell switches

XP8110/ 8120XP8211/ 8212

XP8001

XP8210/ 8220XP8221/ 8222

XP8310/ 8320XP8231/ 8232

XP8410/ 8420XP8241/ 8242

XP8510/ 8520

XP8910 XP8911

XP8110RED


Plate switches 10AX 1 gang 1 way 10 XP8110 1 gang 2 way 10 XP8120

2 gang 1 way 10 XP8210 2 gang 2 way 10 XP8220

3 gang 1 way 10 XP8310





1 gang intermediate switch 10 XP8001

Plate switches 20AX 1 gang 1 way 10 XP8211








*Red dolly series

1 gang 1 way 10 XP8110RED

*Remark: please contact your local sales office for this customised product.

25

Dimmer and fan controller switches


Dimmer switches 500W 2 way switched single dimmer 5 XP8515

500W 2 way switched twin dimmer 5 XP8525

Fan controller400VA 2 way switched fan control 5 XP8105


Double pole control switches20AX 10 XR8200

20AX with neon 10 XR8206

20AX double pole switch + 10AX single pole switch 10 XR8203

20AX double pole switch + twin 10AX single pole switch 10 XR8204

20AX double pole control switch with optional cable & neon 10 XR8207

20AX double gang with neon 10 XR8222

• Complies with BS EN 60669-2-1, a.c only IEC 60669-1 CB certificate


• Capacity of each terminal: 3 x 1.5mm2 conductors 2 x 2.5mm2 conductors

• Frequency 50Hz

• Rating 500W max

• For incandescent lamps only

• Max 150W for halogen lamps


• Complies with BS EN 60669-1, a.c. only IEC 606691-1 CB certificate



E: 2 X 4.0mm2


20A double pole control switches

XP8515 XP8525

XP8105

XR8200

XR8203 XR8204

XR8206

XR8222XR8207

26



Double pole control switches32A with neon 10 XR8327

45A with neon 10 XR8457

45A DP cooker control unit on plate (size 2) 10 XR8456

Cooker control unit

XR8327

XR8456XR8457

XR8458

XR8206AC

XR8206WH

XR8327DW


Double pole cooker control unit45A cooker control unit (size 2) 5 XR8458


Double pole control switch with special marking20AX with neon marked "Air Conditioner" 10 XR8206AC

20AX with neon marked "Water Heater" 10 XR8206WH

32A with neon marked "Dish Washer" 10 XR8327DW

• Complies with BS EN 60669-1, a.c. only IEC 60669-1, CB certificate



E: 1 X 16.0mm2



• Combined switch / sockets have double pole 45A main switch & 13A switched socket outlet



E: 1 X 10.0mm2





Surcharge applies

27


Blank plate (size 1) 20 XV8101

Blank plate (size 2) 10 XV8102XV8101

XV8102


Communication and data Telephone outlet (BS style master) 10 XT8001

Telephone outlet (BS style slave) 10 XT8002

TV co-axial outlet 10 XT8004

TV & FM outlet 10 XT8005

RJ 45 data outlet (1 mod) Cat 5e 10 XT8007

RJ 45 data outlet (1 mod) Cat 6 10 XT8607

RJ 11 data outlet (1 mod) 10 XT8010

RG 6 cable TV outlet 10 XT8012

2A telephone socket with shutter 10 XT8014

TV + RG 6 connector without spliter 10 XT8017



• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws and screw caps


XT8001XT8002

XT8004

XT8005 XT8007XT8607

XT8010 XT8012

XT8017XT8014



28

13A socket outlets





E: 3 X 2.5mm2





Socket outlets 13A single unswitched 10 XS8113

13A double unswitched (size 2) 5 XS8213

13A single switched 10 XS8114

13A double switched (size 2) 5 XS8214

13A single switched with neon 10 XS8117

13A double switched with neon (size 2) 5 XS8217

XS8113

XS8213

XS8114

XS8214

XS8117

XS8217


* Socket are with FREE dust preventive sticker to give additional protection during installation* Sockets with Red dolly switch are also available / Surcharge applies

29




E: 3 x 1.5mm2






E: 3 x 2.5mm2




Socket outlets 5A round pin unswitched 10 XS8905

5A round pin switched 10 XS8906




German style sockets 16A German style socket (without shutter) 10 XS8413

16A German style socket (with shutter) 10 XS8414

XS8905

XS8906

XS8915

XS8916

XS8413XS8414

15A socket outlets

5A socket outlets

30

10A socket outlets

• Complies with IEC 884-1



E: 3 x 2.5mm2



XS8212P


Socket outlets

10A 2 pin unswitched universal socket 10 XS8211P

10A 2 pin switched universal socket 10 XS8212P

10A 2 pin unswitched twin universal socket 10 XS8221P

10A 3 pin multi international socket 10 XS8314

XS8211P

XS8221P

XS8314

31


Fused connection units 13A fused with flex outlet 10 XR8130

13A switch fused with flex outlet 10 XR8131

13A switch fused with neon and flex outlet 10 XR8137

13A fused with neon and flex outlet 10 XR8138


Connection units 25A connection unit with flex outlet 10 XR8250

45A connection unit with flex outlet 10 XR8450


• Cable clamp accommodates up to 2.5mm2 flexible cords




E: 2 x 4.0mm2

• All units fitted with a 13 Amp fuse link to BS 1362, can be supplied with 2 Amp, 5 Amp fuse link



XR8130

XR8131

XR8137

XR8138

XR8250

XR8450

Connection units

• Complies with BS5733 • Supplied with M3.5 x 25mm long fixing screws and screw caps


E: 2 x 6.0mm2

45A connection unit• Capacity of each terminal: L, N: 2 x 6.0mm2

E: 2 x 6.0mm2



32

Lampholders

Straight BC batten* • Complies with BS EN 61184:1997

Ceiling rose*• Complies with BS 67

• 2 earth terminals

• Feet on base to add mounting on uneven surfaces

XB8001

XB8002

XB8003


Lampholders 3 terminal, home office shield BC batten 10 XB8001(pin type)

3 terminal, home office shield BC batten 10 XB8002 (screw type)

Ceiling rose 10 XB8003

33

XB8351

XB8471

XB8472

XB8352

Mounting boxes


Mounting box 35mm depth (size 1) 10 XB8351




• Made to BS5733 standard • Colour and size match to hager 8000, 9000, 9088, 10088 series White WA

• Knockouts are provided on the base and sides for cable entry

• With earth terminal

• Material: PVC

System 9000

The clip on cover feature ensures all fixing screws are hidden.

Also during renovation, by removing the cover, it is possible to

ensure that no paint or wall paper will look untidy, as this can be

covered by re-fitting the cover when finished. Our changeable

colour clip on cover is today's electrical fashion device and

aims to suit any interior design theme perfectly. We provide

a complete product range to cover all customer requirements,

including sensor movement detectors, which could upgrade

your lighting system, saving energy and cost.

System 9000

Wall switches P.36

Bell switches P.37

Dimmer and fan control switches P.37





Communication and data P.40


Shaver socket P.41



15A and 16A socket outlets P.43




Others P.45

35

36

Wall switches


Plate switches 10AX 1 gang 1 way 10 XP9110 1 gang 2 way 10 XP9120







4 gang 1 way (size 2) 5 XP9412





intermediate switch 10 XP9001

Plate switches 20AX 1 gang 1 way 10 XP9211











2 x 2.5mm2




XP9110/ 9120XP9211/ 9212

XP9210/ 9120XP9221/ 9222

XP9310/ 9320XP9231/ 9232

XP9410/ 9420XP9241/ 9242

XP9610/ 9620

XP9412

XP9810/ 9820

XP9001

37


Bell switches single pole 10A Marked bell 10 XP9910

Marked press 10 XP9911


Dimmer and fan control switches 500W 2 way switched single dimmer 5 XP9515

500W 2 way switched twin dimmer 5 XP9525

400VA 2 way switched fan control 5 XP9105

• Complies with BS EN 60669-1 IEC 60669-1




2 x 2.5mm2


Dimmer and fan control switches

XP9910

XP9911

XP9515

XP9525

XP9105

• Complies with BS EN 60669-2-1, a.c only IEC 60669-2-1 CB certificate



2 x 2.5mm2

• Frequency: 50 Hz

• Rating 500W max

• For incandescent lamps and max 150W halogen lamps


Bell switches

38



Double pole control switches 20AX 10 XR9200

20AX with neon 10 XR9206

20AX with flex outlet 10 XR9201

20AX with neon and flex outlet 10 XR9207

20AX double gang with neon 10 XR9222


Double pole control switches 32A with neon 10 XR9327

45A with neon 10 XR9457

45A double pole cooker control unit on (size 2) 10 XR9456


• Complies with BS EN 60669-1, a.c. only IEC 60669-1 CB certificate



E: 2 x 4.0mm2






E: 2 x 16.0mm2


XR9200 XR9206

XR9201 XR9207

XR9222

XR9327

XR9457 XR9456

39

Cooker control unit


Double pole cooker control unit45A cooker control unit (size 2) 5 XR9458


Double pole control switch with special marking20AX with neon marked "Water Heater" 10 XR9206WH

20AX with flex outlet marked "Air Conditioner" 10 XR9201AC

20AX with neon and flex outlet 10 XR9207ACmarked "Air Conditioner"

20AX with neon and flex outlet 10 XR9207WHmarked "Water Heater"

32A with neon marked "Air Conditioner" 10 XR9327AC


• Combined switch / sockets have double pole 45A main switch and 13A switched socket outlet


• Capacity of each terminal: L, N: 1 x 16mm2

E: 1 x 10mm2



XR9458

XR9206WH

XR9201AC

XR9207AC

XR9207WH

XR9327AC



Surcharge applies

40



Communication and dataTelephone outlet (BS style master) 10 XT9001

Telephone outlet (BS style slave) 10 XT9002

FM co-axial outlet 10 XT9003

TV co-axial outlet 10 XT9004

TV & FM connector 10 XT9005

TV / FM splitter isolator SCV outlet (size 2) 10 XT9025 (blank plate only)

TV / FM outlet with splitter 10 XT9006

RJ45 data outlet (1 mod) Cat 5e 10 XT9007

RJ45 data outlet (2 mod) Cat 5e 10 XT9008

RJ45 data outlet (1 mod) cat 6 10 XT9607

RJ45 data outlet (2 mod) cat 6 10 XT9608

RJ11 + RJ45 data outlet 10 XT9009

RJ11 data outlet (1 mod) 10 XT9010

RJ11 data outlet (2 mod) 10 XT9011

RG6 cable TV outlet 10 XT9012

Branching terminal 5-pair tel. terminal 10 XT9013

2A telephone socket with shutter 10 XT9014

TV/ FM outlet 10 XT9015

TV/ FM outlet slave 10 XT9016

TV/ RG6 connector without splitter 10 XT9017



XT9001 XT9002

XT9003 XT9004

XT9005 XT9006

XT9007XT9607

XT9008XT9608

XT9009 XT9010

XT9011 XT9012

XT9014 XT9015

XT9016 XT9017

XT9025

XT9013

41



Blank plates Blank plate (size 1) 20 XV9101

Blank plate (size 2) 10 XV9102


Shaver socket 115V / 230V [20VA] (size 2) 1 XS9200

Shaver socket



• Designed for use in bathrooms and washrooms and incorporates a double wound isolating transformer for an earth free supply. Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets rating 20VA on either voltage


• Primary circuit is protected by a self-resetting thermal overload device. Insertion of shaver plug automatically switches on the transformer, removal automatically switches it off. A positive interlock prevents 2 plugs being inserted simultaneously


XS9200

XV9101

XV9102



42

13A socket outlets


Socket outlets 13A single unswitched 10 XS9113

13A double unswitched (size 2) 5 XS9213

13A single switched 10 XS9114F

13A double switched (size 2) 5 XS9214F

13A single switched with neon 10 XS9117

13A double switched with neon (size 2) 5 XS9217





E: 3 x 2.5mm2




XS9113

XS9213

XS9114F

XS9214F

XS9117

XS9217




E: 3 X 1.5mm2



5A socket outlets



5A round pin switched 10 XS9906XS9905 XS9906

* Socket are with FREE dust preventive sticker to give additional protection during installation


43

15A and 16A socket outlets




German style sockets 16A German style socket (without shutter) 10 XS9413

16A German style socket (with shutter) 10 XS9414




E: 3 X 2.5mm2



XS9915 XS9916

XS9413XS9414

• Complies with IEC 884-1



E: 3 X 2.5mm2




Socket outlets 10A 2 pin unswitched universal socket 10 XS9211P

10A 2 pin switched universal socket 10 XS9212P

10A 2 pin unswitched twin universal socket 10 XS9221P

10A socket outlets

XS9211P

XS9212P

XS9221P

44






• Capacity of each terminal: L, N: 3 X 4.0mm2 E: 2 X 4.0mm2

• All units fitted with a 13A fuse link to BS 1362, can be supplied with 2A, 5A fuse link.




Fused connection units13A fused with flex outlet 10 XR9130

13A switch fused with flex outlet 10 XR9131

13A switch fused with neon and flex outlet 10 XR9137

13A fused with neon and flex outlet 10 XR9138

XR9130

XR9131

XR9137

XR9138

45

XC 9001

XC 9002

Connection units


Door chime • complies with BSEN 60335-1, IEC 60669-1 10 XD9001• 250V AC or 4.5V DC (AAA x 3) • frequency 50 Hz • with adjustable melody / ding dong sound • supplied with M3.5 x 25mm long fixing screws

WA covers WA Cover for switch 10 XC9001

WA Cover for socket 10 XC9002

XD 9001


Connection units 25A connection unit with flex outlet 10 XR9250

45A connection unit with flex outlet 10 XR9450

XR9250

XR9450



E: 2 x 6.0mm2

45A connection unit• Capacity of each terminal: L, N: 2 x 6.0mm2

E: 2 x 6.0mm2


Others

System 9088

System 9088

Wall switches P.48

Bell switches P.49


Double pole control switches P.50


Hotel ranges P.51

The large concave rocker switch feature provides a subtle feel

when switching. The product is available in a full range of colours

and finishes, which ensures the compatibility of the switches with

the interior design. The changeable clip on cover enables you to

mix and match to create your own product character.

The unique "Blue Mechanism" represents Hager's Professional

products in order to ensure quality and safety. System 9088* has

obtained the British certificate under the International Third Party

Laboratory Nemko UK.

47

48

Wall switches

Description Pack Cat

Qty. Ref.

Large dolly switches 10AX1 gang 1 way, large dolly 10 XL9110

1 gang 2 way, large dolly 10 XL9120

1 gang Intermediate large dolly 10 XL9001





4 gang 1 way, large dolly (size 2) 10 XL9410


Large dolly switches with neon 10AX 1 gang 1 way, large dolly with neon 10 XL9117

1 gang 2 way, large dolly with neon 10 XL9127





Large dolly switches 20AX1 gang 1 way, large dolly 10 XL9211


2 gang 1 way, large dolly 10 XL9221-2

2 gang 2 way, large dolly 10 XL9222-2








• Switches with neon for illuminated identification in the dark enviroment


2 X 2.5mm2

•Two way switches can be wired either 1 way or 2 way



XL9110/ 9120

XL9001

XL9210/ 9220

XL9310/ 9320

XL9410/ 9420

XL9117/ 9127 XL9217/ 9227

XL9317/ 9327

XL9211XL9212

XL9221-2XL9222-2

XL9231XL9232

XL9241XL9242

49

Bell switches


Bell switches single pole 10AMarked bell large dolly 10 XL9910

Marked press large dolly 10 XL9911

Without marking large dolly 10 XL9911NM

• Complies with BS EN 60669-1




2 X 2.5mm2


XL9910 XL9911

XL9911NM




• For incandescent lamps only


XL9515 XL9525

Description Pack Cat Qty. Ref. Dimmer switches600W 1 gang, large dolly 10 XL9515dimming switch with neon (cycle action)

400W 2 gang, large dolly 10 XL9525dimming switch with neon (cycle action)

Dimmer switches

50



Double pole control switches with special marking

20AX 1 gang, large dolly with neon 10 XL9206WH

marked "Water Heater"

20AX 2 gang, large dolly with neon 10 XL9222WM

marked "Washing Machine"

XL9206WH

XL9222WM

Special marks Abbreviation

"Air Conditioner" - AC

"Cooker Hob" - CB

"Cooker Hood" - CH

"Computer Power" - CP

"Dryer" - DR

"Dish Washer" - DW

"Fridge" - FR

"Oven" - OV

"Water Heater" - WH

"Washing Machine" - WM

Surcharge applies




20AX 1 gang, large dolly 10 XL9200

20AX 2 gang, large dolly 10 XL9221

20AX 1 gang, large dolly with neon 10 XL9206

20AX 2 gang, large dolly with neon 10 XL9222




E: 2 x 16.0mm2


XL9200

XL9206 XL9222

XL9221

51

Hotel ranges

Description Pack Cat Qty. Ref. Hotel rangeKey tag switch with key card (time delay 60s) 5 XH9001

Key card only 5 XH9001CARD

"DND" & "Please clean up" switches with (RED) neon 10 XH9002

"DND" & "Please clean up" indication box with door bell switch 10 XH9003XH9003XH9002

XH9001CARDXH9001

• Complies with BSEN 60669-1 • Supplied with M3.5 x 25mm long fixing screws


Stainless Steel series incorporates double pole switched sockets, fused connection units, communication, connection unit, blank plates.

Brushed Chrome finishing of this range provides stylish appearance to complement

any setting, whether in the office, hotel or at home. The products are highly

scratch resistant with an epoxy lacquer finish, the products will maintain their

appearance for many years.

The unique “Blue Mechanism” represents Hager’s Professional products and in

order to ensure quality and safety. Stainless Steel series* has obtained the British

certificate under the International Third Party Laboratory PSB Corporation.

Stainless steel

52

53

Stainless steel

Wall switches P.54

Bell switches P.54



32 & 45A double pole control switches P.55

Communication & data P.56

Moulded blank plates P.56





54

• Complies with BS EN 60669-1, a.c only SS227 MS616





• Terminal markings denote: L1 = one way L2 = two way

XP120SS

XP001SS

XP220SS

XP320SS

XP910SS


Bell switch single pole 10ABell switch 10 XP910SS

• Complies with BS EN 60669-1 SS227 MS616


• Bell push / press can be zwired to make 250V a.c.


Plate switches 10AX1 gang 2 way 10 XP120SS

2 gang 2 way 10 XP220SS

3 gang 2 way 10 XP320SS

4 gang 2 way (size 2) 5 XP420SS

1 gang intermediate switch 10 XP001SS

XP420SS

Bell switch

Wall switches

55

XP215SS


Dimmer switch 40-400W 1 way un-switched dimmer 10 XP215SS

• Complies with BS EN 60669-2-1, a.c only IEC 60669-2-1 CB certificate SS227 MS616



• Frequency 50/60Hz

• Rating 400W max

20A double pole control switch


XR206SS

XR327SS

XR457SS

• Complies with BS EN 60669-1, a.c. only SS227 MS616


• Capacity of each terminal: 3 x 2.5mm2 conductor



• Capacity of each terminal: 1 x 16mm2 conductor 1 x 10mm2 earth conductor


Double pole control switch 20A with neon 10 XR206SS


Double pole control switches 32A with neon 10 XR327SS

45A with neon 10 XR457SS

Dimmer switch

56



Blank plate (size 1) 20 XV102SS

Blank plate (size 2) 10 XV202SS

XV202SS

XV102SS

Blank plates



Communication and data RJ 45 data outlet (1 mod) 10 XT007SS

RJ 45 data outlet (2 mod) 10 XT008SS

RJ 11 data outlet (1 mod) 10 XT010SS

XT007SS

XT008SS

XT010SS


57

• Complies with BS 1363 Pt 2, a.c. only SS145 MS589


• Capacity of each terminal: 4 x 2.5mm2 conductors switched; 4 x 2.5mm2 unswitched


• Double pole switching mechanism


Socket outlets 13A single unswitched 10 XS113SS

13A double unswitched (size 2) 5 XS213SS

13A single switched 10 XS114SS

13A double switched (size 2) 5 XS214SS

13A single switched with neon 10 XS115SS

13A double switched with neon (size 2) 5 XS215SS

XS114SS

XS115SS

XS113SS

XS214SS

XS215SS

XS213SS

13A socket outlets

58






• Capacity of each terminal: switched; 4 x 2.5mm2 unswitched; 4 x 2.5mm2 conductors




Fused connection units13A fused with flex outlet 10 XR130SS

13A double pole switch fused with flex outlet 10 XR131SS

13A double pole switch fused with neon 10 XR134SS

13A double pole switch fused with neon and flex outlet 10 XR137SS

13A fused with neon and flex outlet 10 XR138SS

XR130SS

XR134SS

XR138SS

XR137SS

XR131SS

15A socket outlets


Socket outlets 15A round pin switched 10 XS916SS

15A round pin switched with neon 10 XS917SS

XS916SS XS917SS

• Complies with BS 546 SS472 MS589


• Capacity of each terminal: 3 x 2.5mm2 conductors 3 x 2.5mm2 earth conductors

59


Connection unit 25A connection unit with flex outlet 10 XR250SS

XR250SS

• Complies with BS573 SS241



E: 2 x 6.0mm2

Connection unit

Metal Clad series incorporates double

pole switched sockets, fused connection

units, connection unit, blank plates.

The hard-wearing range of Metal Clad accessories

is designed to withstand the toughest conditions

and heaviest knocks, particularly in industrial

installations. The front plate is coated with a two

layer tough paint finish and will maintain its good

looks through years of hard labour.

Metal Clad series* has obtained the British

certificate under the International Third Party

Laboratory PSB Corporation.

Metal clad

60

61

Metal Clad

Wall switches P.62


32A and 45A double pole control switches P.62




62

• Complies with BS EN 60669-1 a.c. only SS227 MS616

• 'X' rated - No need to derated for fluorescent loads


• 1, 2, 3 and 4 gang units supplied with a two knockout matching surface box

• Capacity of each terminal: 2 x 2.5mm2 conductors 5 x 1.5mm2 earth terminal (box) • Other switches are available without mounting boxes on request

• Knockouts accept 20mm diameter conduit

• Earth terminal supplied with each box

XP120MC XP220MC

XP320MC XP420MC


Single pole plate switches 10AX1 gang 2 way 10 XP120MC

2 gang 2 way 10 XP220MC



Wall switches

XR206MC

XR457MC



• Capacity of each terminal: 3 x 2.5mm2 conductor




• Capacity of each terminal: 1 x 16mm2 conductor 1 x 10mm2 earth conductor


Double pole control switches 45A with neon 10 XR457MC


Double pole control switches 20A with neon 10 XR206MC


63

13A socket outlets

XS115MC

XS916MC

XS214MC

XS215MC

15A socket outlets

• Complies with BS 546 SS472 MS589


• Capacity of each terminal: 3 x 2.5mm2 conductors 3 x 2.5mm2 earth conductors







Socket outlets 15A round pin switched 10 XS916MC


Socket outlets 13A single switched 10 XS114MC

13A double switched (size 2) 5 XS214MC

13A single switched with neon 10 XS115MC

13A double switched with neon (size 2) 5 XS215MC

XS114MC







• Optional flex outlet - for choice of use -


Fused connection units13A double pole switch fused with neon 10 XR134MC

13A double pole switch fused with neon and flex outlet 10 XR137MCXR134MC XR137MC


64

Floor mounting RCD socket IP55 IP66 IP66 isolator Doorbellsocket

65

Floor mounting RCD socket IP55 IP66 IP66 isolator Doorbellsocket

IP55/66 rangeIP55 Switches P. 66

IP55 Special Function Switches P. 66

IP55 Sockets P. 67

IP66 Sockets P. 68

IP66 isolator P. 68

Independent function itemsRCD socket P. 70

Doorbell P. 70

Floor mounting socket P. 71

66

IP55 Switches

Description Conduit Pack Cat. Entries Qty. Ref.

IP55 switches 10AX Inductive load rated1 gang 1 way 4 x 20 mm 1 XPW5110

1 gang 2 way 4 x 20 mm 1 XPW5120




IP55 Special Function Switches

IP55 Switches

IP55Available in 1, 2 & 3 gang

Complies withBS EN 60529 IP testBS EN 60669-1

Features • Clear Silicon gasket allows operation of switch without lifting cover.

• Clear Silicon gasket is replaceable.

• Large switch rocker allows easy operation.

• Mounting screws locations segregated from the back box by gaskets for improved IP installations.

• 20 mm Conduit entries available on all sides.

• IP rated cable gland included

Technical data • IP55

• 250V 10AX rated (suitable for fluorescent loads)

• 1 way & 2 way models

• Terminals capable of taking 3 x 1.5 mm2 or 2 x 2.5 mm2 cables.

• Earth Terminal mounted in back box.


IP55 switches 20AX Double pole1 gang 1 way double pole 4 x 20 mm 1 XRW5200

IP55 switches 10AX Bell Press1 gang 1 way bell press 4 x 20 mm 1 XPW5910

XPW5110 XPW5120

XPW5210XPW5220

XPW5320

XPW5910

XRW5200

67

IP55 Sockets

IP55 Sockets

Single & Twin Switched and Un-switched sockets outlets.

Complies withBS EN 60529 IP testBS 1363 Socket outletsSS145MS589

Features • Clear silicon gasket allows visual identification of switch position without lifting cover.

• Clear silicon gasket is replaceable.


• 20 mm Conduit entries available on all sides.



• 250V 13A

• Terminals capable of taking 3 x 2.5 mm2 or 2 x 4 mm2 cables.

• Earth Terminal mounted in back box.


IP55 Un-switched sockets Single socket un-switched 13A 4 x 20 mm 1 XSW5113

Double socket un-switched 13A 8 x 20 mm 1 XSW5213

IP55 Switched sockets Single socket switched 13A 4 x 20 mm 1 XSW5114

Double socket switched 13A 8 x 20 mm 1 XSW521

XSW5113

XSW5114

XSW5213

XSW5214

68

IP66 Sockets

IP66 SocketsSingle Un-switched

Twin Switched & Un-switched

Fuse Connection UnitsBS1363: Part 4 1995 Connection Units

Complies withBS EN 60529 IP testBS 1363 Socket outlets

Features • Soft GEL cable seals to maintain IP66 when plug is inserted.


• 20 mm conduit entries available on all sides.



• 250V 13A• Terminals capable of taking 3 x 2.5 mm2 or 2 x 4 mm2 cables.

• Earth terminal mounted in back box.


IP66 Un-switched sockets Single socket un-switched 13A 4 x 20 mm 1 XSW6113

Double socket un-switched 13A 8 x 20 mm 1 XSW6213

IP 66 Switched sockets Double socket switched 13A 8 x 20 mm 1 XSW6214

IP66 Spur units 13A Fused spur with flex outlet 4 x 20 mm 1 XRW6130

Fused spur with switch 4 x 20 mm 1 XRW6131

XSW6113

XSW6213

XSW6214

XRW6130

XRW6131

69

IP66 isolator

Description Pack Cat Qty. Ref. Rating: AC 22A

2 pole

20A 2 pole IP66 utility isolator 1 JG220U 32A 2 pole IP66 utility isolator 1 JG232U

40A 2 pole IP66 utility isolator 1 JG240U


3 pole

20A 2 pole IP66 utility isolator 1 JG320U 32A 2 pole IP66 utility isolator 1 JG332U 40A 2 pole IP66 utility isolator 1 JG340U

3 pole + switched neutral

20A 2 pole IP66 utility isolator 1 JG420U 32A 2 pole IP66 utility isolator 1 JG432U



Rating: AC23A2 pole

20A 2 pole IP66 isolator 1 JG220I 32A 2 pole IP66 isolator 1 JG232I 40A 2 pole IP66 isolator 1 JG240I

63A 2 pole IP66 isolator 1 JG263I

3 pole 20A 2 pole IP66 isolator 1 JG320I








Description:The range of IP66 isolators are designed to be used in outdoor applications with IP66 degree of protection. They are rated at AC22A and AC23A offer options of 2, 3 poles and 4 poles with switched neutral. They are compact and easy to install with 2 screw quick release top cover

Electrical specification:Tested and complies with BSEN 60947-3.

Rated voltage: 250V ~ AC 440V ~ AC

Rating AC22A is for switching of mixed resistive and inductive loads, including moderate overloads.

Rating AC23A is for switching of motor loads or other highly inductive loads.

Mechanical specification:Protection Category: IP66

Material: Polycarbonate – UV grade.

Devices & accessories:DP 20-40ATP & N 20-40A

TP & SW N 20-63A

70


Doorbells 220-240V AC 50Hz 1 XC001

4 X 1.5V R14C batteries 1 XC002

XC001

XC002

• Complies with BS EN 61558-1:1998 BS EN 61558-2-8:1999

XC001Dimension:105mm (w) x 168mm (h) x 45mm (d)

Power source: 220-240V AC 50Hz

XC002Dimension:105mm (w) x 168mm (h) x 45mm (d)

Power source: 4 x 1.5V R14C batteries

• Complies with BS7288:1990

• Voltage: 220/240 ac 50Hz

• Rated trip current: 30mA

• RCD section: double pole: breaking capacity 250A on earth fault

• Through fault withstand current: 1500A

• Tripping: less than 40mS at 150mA


RCD sockets1 gang latching 10 XS114RCD

2 gang latching 10 XS214RCD

XS114RCD

XS214RCD

RCD Socket

Doorbell

71

Floor mounting socket


Floor mounting socket1 gang 13A single floor mounting socket 10 XS113FM

2 gang 13A twin floor mounting socket 5 XS213FM

XS113FM

XS213FM

Floor mounting socketSingle and Twin un-switched sockets outlets

Complies with BS1363 Socket outletsMS589SS145

Technical data• 250V 13A

• Single and Twin

• Terminals capable of taking: 3 x 2.5 mm2 or 2 x 4 mm2 cables

72

Hager products are designed and

manufactured to the relevant IEC

standards and the high level of

quality is made possible by the

use of advanced equipment and

a quality assurance system man-

aged by a team of highly qualified

men and women.

Technical information

73

Product standard page 74 - 76

CE marking page 77

Ingress Protection page 78

Circuit diagram page 79 - 84

IP product - dimension page 85

IP65 / 66 isolatior page 86

Index page 87 - 88

74

Product standards

Compliance with standards

Regulation 511-01-01 of BS 7671 : Requirements for Electrical

Installations, IEE Wiring Regulations Sixteenth Edition is of particular

importance to specifiers and installers with respect to product stan-

dards.

Regulation 511-01-01 requires every item of equipment to comply

with the relevant requirements of the applicable British Standard, or

Harmonised Standard appropriate to the intended use of the equip-

ment.

British Standards (BS)

The BSI (British Standards Institution) was the first national

standards body in the world. There are now more than 100 simi-

lar organisations which belong to the International Organisation

for Standardisation (ISO) and the International Electrotechnical

Commission (IEC).

British Standards are drawn up by all those who have a particular

interest in the subject i.e. manufacturers, users, research

organisations, government departments and consumers. This work

is co-ordinated by BSI staff, acting as secretaries to the

committees where the work is done. All standards are made

available for public comment before they are published.

Harmonised standards

A Harmonised standard is a European standard formally presented

by CENELEC, to the European Commission and published in the

commission’s official journal. CENELEC is the Comite European

de Normalisation Electrotechnique i.e. European Committee for

Electrotechnical Standardisation.

BS 7671 part 2 defines a harmonised standard as a standard which

has been drawn up by common agreement between national stan-

dards bodies notified to the European Commission by all member

states and published under national procedures. The UK national

standards body is the British Standards Institution. In the UK a har-

monised standard will normally be published as a British Standard

European Norm i.e. BS EN.

British Standard European Norm (BS EN)

CENELEC European standards are pre-fixed EN (European Norm).

Adoption of the European Standard within the EC is mandatory

and member countries of CENELEC are obliged to publish them

unchanged. In the UK such standards are further endorsed with

the additional prefix ‘BS’, for example BS EN 60669-1 : 1996 is the

British Standard European Norm for Switches for household and

similar fixed electrical installations.

Whilst a European Standard can be a direct replica of an IEC

standard, discussions within CENELEC may result in the

formulation of a standard which includes commonly agreed

variations and Special National Conditions.

International Electrotechnical Commission (IEC)

Founded in 1906 the International Electrotechnical Commission (IEC)

is the world organisation that prepares and publishes

international standards for all electrical, electronic and related

technologies. The membership consists of 60 participating

countries, including all the worlds major trading nations and a grow-

ing number of industrialising countries.

Foreign national standards based on IEC standards are permitted

to be used by BS 7671. However the specifier must verify that any

differences between the foreign standard and the corresponding

British Standard or Harmonised Standard does not result in any

lesser degree of safety than that afforded by compliance with the

British Standard. This assessment would probably need to be made

by specialists.

Conclusion

BS 7671 (IEE Wiring Regulations) recognises equipment which com-

plies with a British Standard or Harmonised Standard

appropriate to the intended use of the equipment without the need

for further qualification.

Hager products have always been designed and

manufactured to a high standard to ensure compliance with the cur-

rent British or Harmonised Standard. See the table below for further

information.Modiam in utetuero commolumsan vullamet nonulput

luptat nim ipit nit nit irit, voloreet velit, quam do estrud modoles

equatet veliscilit in ulputpat. Dui tatisse quisi.

75

Product description BS number Description

Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations

Indicators BS 5733 : 1995 General requirements for Electrical Accessories

Fused connection unit, cord outlets BS 5733 : 1995 Switches for household and similar fixed electrical installations

with particular requirements for timedelay switches (TDS)

Dimmers BS EN 60669-2-3: 2006 Switches for household and similar fixed electrical installations


Frames and plates BS 5733 : 1995 Switches for household and similar fixed electrical installations


Boxes BS 4662 : 1980 or Specification for boxes for the enclosure of electrical accessories

BS 5733 : 1995

Product standards

76

Product standards

Product description BS number Description

10 Amp Wall switch BS EN 60669-1: 2000 Switches for household and similar fixed electrical installations

IEC 60669-1 Ed.3.2b:2007

CB certificate

Dimmer switches BS EN 60669-2-1: 2004 Electronic variable control switches (dimmer switches) for tungsten

IEC 60669-2-1 Ed.4.0b: 2002 filament lighting

CB certificate

13 Amp Socket Outlets BS 1363 : Part 2 : 1995 13A plugs, socket-outlets, adaptors and connection units

15 Amp Switched Socket BS 546 : 1950 (1988) Specification. Two-pole and earthing-pin plugs, socket-outlets and socket-

outlet adaptors

20 Amp D.P. Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations

IEC 60669-1 Ed.3.2b: 2007

13 Amp Fused Connection Unit BS 1363 : Part 4 : 1995 Specification for 13A fused connection units switched and unswitched

45 Amp D.P. Switches BS EN 60669-1 : 2000 Switches for household and similar fixed electrical installations

BS 3676 : 1 : 2000

45 Amp Cooker Control Unit BS 4177 : 1992 Cooker control units

IEC 60669-1

CB certificate

Shaver Socket Outlet BS EN 61558-2-5: 1998 General Requirements Isolating transformers and safety isolating

transformers

IEC 61558-2-5: 1997 Electromagnetic compatibility, immunity requirements for household

CB certificate appliances tools and similar apparatus.

25 Amp/ Amp Flex Outlet Plate BS 5733: 1995 General Requirements for Electrical Accessories

BS Batten BS EN 61184:1997 Home office shield are T2 rated

Ceiling rose BS 67

77

CE marking

Objective of CE marking.

CE marking is a “technical passport” which indicates that a

product conforms to all relevant directives which require CE

marking, thus enabling the product to travel within the E.U.

A directive is a piece of mandatory European Legislation

implemented by regulations in all member countries. Its purpose is

to allow free movement of goods that are safe and fit for use into

and within the European Union.

CE marking is not a quality mark and it does not indicate that any

testing or certification has been carried out.

The marking.

CE marking is a statement by the manufacturer that the product

complies with the essential requirements of all relevant Directives,

notably in the area of technical safety and conformity assessment.

CE marking can appear on the product or packaging or

documentation or combination thereof dependant upon which

directive it has to comply with.

CE marking is a very specific graphical symbol and must be clearly

separated from other marks.

Directives.

It is the responsibility of the manufacturer or his authorised

representative who places the product onto the EC market to decide

which Directive(s) apply and to ensure the CE marking is affixed by

the dates stated in the relevant directive(s)

For the majority of Hager products only one directive is applicable

this is referred to as the Low Voltage Directive. Where some

products incorporate electronic devices the Low voltage Directive

and the Electromagnetic Compatibility Directive are applicable.

The Low Voltage Directive.

EC directives are requirements adopted by the European Council and

published in the Official Journal of the European Communities and

are addressed to the member states.

European Council Directive 73/23/EEC with an amendment 93/68/

EEC is known as the Low Voltage Directive.

The Low Voltage Directive has been implemented into UK law by the

“ Electrical Equipment (Safety) Regulations 1994” and apply to all

electrical / electronic equipment operating at a voltage of

50-1000 V a.c. or 75-1500 V d.c.. They do not apply to plugs,

socket outlets and adapters which are covered by the Plugs and

Sockets (Safety) Regulations 1994.

Relationship between the Electrical Equipment (Safety)

Regulations, Harmonised standards and the IEE Wiring

Regulations Sixteenth Edition.

The Electrical Equipment (Safety) Regulations requires electrical

equipment to be safe. Electrical equipment which satisfies the safety

provisions of Harmonised standards shall be taken to comply with

this requirement, unless there are reasonable grounds for suspecting

that the equipment does not so comply.

Regulation 511-01-01 of BS 7671 Requirements for Electrical

Installations, IEE Wiring Regulations Sixteenth Edition requires every

item of equipment to comply with the relevant requirements of the

applicable British Standard, or Harmonised Standard appropriate to

the intended use of the equipment.

78

Ingress protection

IP Test Short Definition Description0 Non - protected No special protection

1 Protected against A large surface of solid objects the body, such as a greater than hand (but no protection ∅ 50mm 50mm against deliberate access) solid objects exceeding 50mm in diameter.

2 Protected against Fingers or similar objects solid objects not exceeding 80mm in greater than length; solid objects ∅ 12.5mm 12,5mm exceeding 12,5mm in diameter

3 Protected against Tools, wires, etc...., of solid objects diameter or thickness greater than greater than 2,5 mm; ∅ 2.5mm 2,5 mm solid objects exceeding 2,5 mm in diameter

4 Protected against Wires or strips of solid objects thickness greater than greater than 1,0 mm; solid objects 1,0 mm exceeding 1,0 mm in diameter

5 Dust-protected Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment

6 Dust - light No ingress of dust

Thefirstcharacternumeralindicates the degree of protection provided by the enclosure with respect to persons and solid objects, also to the equipment inside the enclosure.

Thesecondcharacternumeralindicates the degree of protection provided by the enclosure with respect to harmful ingress of water; a third character may be used to indicate mechanical strength. An x signifies that no test has been carried out.

Thefirstcharacternumeralprotection against solid substances

Thesecondcharacternumeralprotection against liquid substances

IP Test Short Definition Description0 Non - protected No special protection

1 Protected a gainst Dripping water (vertically) dripping water falling drops) shall have no harmful effect

2 Protected against Vertically dripping water dripping water shall have no harmful when titled up effect when the enclosure to 15° is titled at any angle up to 15° from its normal position

3 Protected against Water falling as a spray at spraying water an angle up to 60° from greater than 60° the vertical shall have no harmful effect

4 Protected against Water splashed against splashing water the enclosure from any direction shall have no harmful effect

5 Protected against Water projected by a water jets nozzle against the enclosure from any direction shall have no harmful effect

6 Protected against Water from heavy seas heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities

7 Protected against Ingress of water in a the effect of harmful quantity shall not immersion be possible when the enclosure is immersed in water under defined conditions of pressure and time

8 Protected against The equipment is suitable submersion for continuous submersion in water under conditions which shall be specified by the manufacturer

15 cm

m

79

Circuit diagram

One way switch Two way switch

Marked Bell Switch

Intermediate Switch

Marked Press Switch

Dimmer Switch

Fan Control

80

Circuit diagram

Double Pole Control Switch Double Pole Control Switch with Neon

Double Pole Control Switch 20AX with Neon + 10AX

Double Pole Control Switch 20AX without Neon + 20AX with Neon

81

Circuit diagram

One way Large Dolly Switch with LED1. LED as location indicator 2. LEDas ON indicator

Two way Large Dolly Switch with LED1. LED as location indicator 2. LEDas ON indicator

3. LED as location indicator

600W 1 Gang Large Dolly DimmingSwitch with Neon(cycle Action)

400W 2 Gang Large Dolly DimmingSwitch with Neon(cycle Action)

82

Circuit diagram

83

Circuit diagram

Jack pin A B

1 White/Green White/Orange

2 Green/White Orange/White

3 White/Orange White/Green

4 Blue/White Blue/White

5 White/Blue White/Blue

6 Orange/White Green/White

7 White/Brown White/Brown

8 Brown/White Brown/White

Jack pin A B

1 White/Green White/Orange

2 Green/White Orange/White

3 White/Orange White/Green

4 Blue/White Blue/White

5 White/Blue White/Blue

6 Orange/White Green/White

7 White/Brown White/Brown

8 Brown/White Brown/White

84

Circuit diagram

HOTEL RANGE"DND" & PLS CLEAN UP" INDICATION BOX WITH DOOR BELL

DimensionSize 1 Size 2 Dimension: 87mm x 87mm Dimension: 87mm x 147mm Mounting: 60.3mm Mounting: 120.6mm

87mm

87mm

60.3mm87mm

147mm

120.6mm

Dimension

85

IP product dimension

Reference ProductRange IPRating Height Width DepthNo. mm mm mm

XPW5110 1G 1 Way Switch 10 AX IP55 91.0 84.0 67.5


XPW5910 1G 10AX Bell Switch IP55 91.0 84.0 67.5

XRW5200 1G DP Switch 20 AX IP55 91.0 84.0 67.5





XSW5113 1G Socket Un-switched 13 A IP55 91.0 84.0 67.5

XSW5114 1G Socket Switched 13 A IP55 91.5 110.0 67.5






XRW6131 Switched Fused Spur 13 A IP66 120.5 110.0 81.5

XRW6130 Fused Spur with Flex outlet 13 A IP66 120.5 110.0 81.5

hager

IP55

W

H

D

hagerIP66

W

H

D

IP55 IP66

8686

hager

OFF

ON

IP 65 isolator

IP 66 isolator

2 pole

Reference Current H W D

JG220U 20 A 170 84 87

JG232U 32 A 170 84 87

JG240U 40 A 170 84 87

JG220U 63 A 170 84 87

• All dimensions are in mm

3 pole


JG320U 20 A 170 84 87

JG332U 32 A 170 84 87

JG340U 40 A 170 84 87




JG420U 20 A 170 84 87

JG432U 32 A 170 84 87

JG440U 40 A 170 84 87

JG420U 63 A 170 84 87


2 pole


JG220I 20 A 170 84 87

JG232I 32 A 170 84 87

JG240I 40 A 170 84 87

JG220I 63 A 170 84 87


3 pole


JG320I 20 A 170 84 87

JG332I 32 A 170 84 87

JG340I 40 A 170 84 87




JG420I 20 A 170 84 87

JG432I 32 A 170 84 87

JG440I 40 A 170 84 87

JG420I 63 A 170 84 87


hager

OFF

ON

87

Index

JGJG220I 69JG220U 69JG232I 69JG232U 69JG240I 69JG240U 69JG263I 69JG263U 69JG320I 69JG320U 69JG332I 69JG332U 69JG340I 69JG340U 69JG420I 69JG420U 69JG432I 69JG432U 69JG440I 69JG440U 69JG463I 69JG463U 69

WGCWGC1 20WGC1CA 20WGC1GD 20WGC1MP 20 WGC1SV 20WGC1TG 20WGC2 20WGC2CA 20WGC2GD 20WGC2MP 20WGC2SV 20WGC2TG 20

WGDWGD001 19

WGHWGHBD 13WGHDC 13WGHKT 13WGHKTCARD 13

WGLWGL101 10WGL111 10WGL111N 10WGL112 10WGL112N 10WGL11B 11

WGL11P 11WGL121 10WGL121N 10WGL122 10WGL122N 10WGL131 10WGL131N 10WGL132 10WGL132N 10WGL211 10WGL211N 10WGL212 10WGL212N 10WGL221 10WGL221N 10WGL222 10WGL222N 10WGL231 10WGL231N 10WGL232 10WGL232N 10WGL2D1N 12WGL2D1WH 13WGLD2D1 12

WGPWGP1D600 11

WGR WGR13 18WGR13S 18WGR13SN 18WGR25 18WGR32D1 12WGR45D1 12WGR45D2 12WGRCCU 12

WGSWGS105S 15WGS10IS 17WGS10U 17WGS10U2 17WGS10US 17WGS113 15WGS113N 15WGS113S 15WGS115 16WGS115S 16WGS116 16WGS116S 16WGS164M 17WGS167M 17WGS200 16

WGS213 15WGS213N 15WGS213S 15WGS267M 17

WGT WGT1M 14WGT1RJ 14WGT1RJ5 14WGT1RJ6 14WGT1S 14WGT2RJ 14WGT2RJ5 14WGT2RJ6 14WGTBT5 14WGTD 14WGTFM2 14WGTV75 14WGTV75F 14

WGV WGV1 19WGV2 19WGVE2 17WGVE3 17

XBXB8001 32XB8002 32XB8003 32XB8351 33XB8352 33XB8471 33XB8472 33

XC XC001 70XC002 70XC9001 45XC9002 45

XDXD9001 45

XHXH9001 51XH9001CARD 51XH9002 51XH9003 51

XL XL9001 48XL9110 48XL9117 48XL9120 48XL9127 48XL9200 50XL9206 50XL9206WH 50XL9210 48XL9211 48XL9212 48XL9217 48XL9220 48XL9221 50XL9221-2 48XL9222 50XL9222-2 48XL9222WM 50XL9227 48XL9231 48XL9232 48XL9241 48XL9242 48XL9310 48XL9317 48XL9320 48XL9327 48XL9410 48XL9420 48XL9515 49XL9525 49XL9910 49XL9911 49XL9911NM 49

XPXP001SS 54XP120MC 62XP120SS 54XP215SS 55XP220MC 62XP220SS 54XP320MC 62XP320SS 54XP420MC 62XP420SS 54XP8001 24XP8105 25XP8110 24XP8110RED 24XP8120 24XP8210 24XP8211 24XP8212 24XP8220 24

Ref. pageno. no.

Ref. pageno. no.

Ref. pageno. no.

Ref. pageno. no.

88

XRWXRW5200 66XRW5910 66XRW6130 68XRW6131 68

XS XS113FM 71XS113SS 57XS114MC 63XS114RCD 70XS114SS 57XS115MC 63XS115SS 57XS213FM 71XS213SS 57XS214MC 63XS214RCD 70XS214SS 57XS215MC 63XS215SS 57XS8113 28XS8114 28XS8117 28XS8211P 30XS8212P 30XS8213 28XS8214 28XS8217 28XS8221P 30XS8311P 30XS8314 30XS8413 29XS8414 29XS8905 29XS8906 29XS8915 29XS8916 29XS9113 42XS9114F 42XS9117 42XS916MC 63XS916SS 58XS917SS 58XS9200 41XS9211P 43XS9212P 43XS9213 42XS9214F 42XS9217 42XS9221P 43XS9413 43XS9414 43XS9905 42XS9906 42XS9915 43XS9916 43

XSWXSW5113 67XSW5114 67XSW5213 67XSW5214 67XSW6113 68XSW6213 68XSW6214 68

XT XT007SS 56XT008SS 56XT010SS 56XT8001 27XT8002 27XT8004 27XT8005 27XT8007 27XT8010 27XT8012 27XT8014 27XT8017 27XT8607 27XT9001 40XT9002 40XT9003 40XT9004 40XT9005 40XT9006 40XT9007 40XT9008 40XT9009 40XT9010 40XT9011 40XT9012 40XT9013 40XT9014 40XT9015 40XT9016 40XT9017 40XT9025 40XT9025 40

XVXV9101 41XV102SS 56XV202SS 56XV8101 27XV8102 27XV9102 41

Ref. pageno. no.

Index

XP8221 24XP8222 24XP8231 24XP8232 24XP8241 24XP8242 24XP8310 24XP8320 24XP8410 24XP8420 24XP8510 24XP8515 25XP8520 24XP8525 25XP8910 24XP8911 24XP9001 36XP9105 37XP910SS 54XP9110 36XP9120 36XP9210 36XP9211 36XP9212 36XP9220 36XP9221 36XP9222 36XP9231 36XP9232 36XP9241 36XP9242 36XP9310 36XP9320 36XP9410 36XP9412 36XP9420 36XP9515 37XP9525 37XP9610 36XP9620 36XP9810 36XP9820 36XP9910 37XP9911 37

XPWXPW5110 66XPW5120 66XPW5210 66XPW5220 66XPW5320 66

XRXR130SS 58XR131SS 58XR132MC 63XR134MC 63XR134SS 58XR137MC 63XR137SS 58XR138SS 58XR206MC 62XR206SS 55XR250SS 59XR327SS 55XR457MC 62XR457SS 55XR8130 31XR8131 31XR8137 31XR8138 31XR8200 25XR8203 25XR8204 25XR8206 25XR8206AC 26XR8206WH 26XR8207 25XR8222 25XR8250 31XR8327 26XR8327DW 26XR8450 31XR8456 26XR8457 26XR8458 26XR9130 44XR9131 44XR9137 44XR9138 44XR9200 38XR9201 38XR9201AC 39XR9206 38XR9206WH 39XR9207 38XR9207AC 39XR9207WH 39XR9222 38XR9250 45XR9327 38XR9327AC 39XR9450 45XR9456 38XR9457 38XR9458 39

Ref. pageno. no.

Ref. pageno. no.

Ref. pageno. no.

Wiri

ng A

cces

sorie

s 2

009

Hager Electro S.A.S132, Boulevard d'Europe67210 ObernaiFrance Tel: + 33 (0) 88 49 50 50Fax: + 33 (0) 88 49 51 44Email: [email protected]: www.hagergroup.net

Hager Electro LimitedSuite 310, Chinachem Golden Plaza77 Mody Road, TST East, KowloonHong Kong Tel: + (852) 2688 0228Fax: + (852) 2688 0336Email: [email protected]: www.hager.hk

Hager Electro Systems Pte Ltd23 New Industrial Road #01-03/04Century Industrial BuildingSingapore 536209 Tel : + (65) 6383 1030Fax : + (65) 6383 0230Email: [email protected]: www.hager.com.sg

Hager Engineering (M) Sdn, Bhd.Level 5, Lot 8, Jalan Astaka U8/84Seksyen U8, Bukit Jelutong40150 Shah AlamSelangor Darul EhsanMalaysia

Tel: + (60) 3 7859 1935Fax: + (60) 3 7859 1945Email: [email protected]: www.hager.com.my

Hager (VN) Electro Ltd82 Nguyen Ba Tuyen Street,War 12, Tan Binh District, Ho Chi Minh City, Vietnam

Tel: + (84) 8 3811 3548/ 49/ 50/ 51Fax: + (84) 8 3811 3552Email: [email protected]: www.hager.hk

Full Catalogue 2009

Documents

Transcript of Full Catalogue 2009