Catálogo Cidepe - 15ª edição - Inglês
-
Upload
cidepe-ciencia -
Category
Documents
-
view
235 -
download
10
description
Transcript of Catálogo Cidepe - 15ª edição - Inglês
INSTRUMENTATION
AND ACQUISIT
ION
SETS
SCIENCE R
OO
M
MATHEMATICS
PHYSIOLO
GY
BIOLOGY
For Cidepe, to think outside the box is to invest in the future. That is why our work consists of investments in education, of sparking the best ideas and make current-time studies become major turning points for tomorrow. If we do not think about the future, it will be impossible to create instruments capable of
showing what happens around us in a practical manner. Cidepe’s products are intended to raise students’ awareness to learning, as well as to encourage their creativity and increase their ability to face several situations.
PHYSIC
S
FluidMechanics
SolidMechanics
Thermodynamics
Opticsand Waves
Electricity andMagnetism
ModernPhysics
K
NOWLEDGE IN LOVE WIT
H
AREAS
7 to 23 | Instrumentation and Acquisition
24 to 126 | Physics
127 to 132 | Sets
133 | Science Room
134 to 139 | Mathematics
140 to 141 | Physiology
142 | Biology
PRODUCTS
WARNINGThe products may be technically improved without further notice. Reproduction of this publication, in part or in full, is strictly prohibited. Each Cidepe product is protected by industrial patents and, therefore, they are protected by the law of patents of industrial property; thus they must not be copied. The technical manuals and books that accompany the Cidepe products are protected by copyright laws.
TABLE OF CON
TE
NT
S
17 CL010 Photoelectric sensor barrier (photogate), miniDIN7 CL005C Software for data acquisition and Lab200 USB interface, 5 VCC9 CL011 Force sensor, miniDIN9 CL012B Absolute pressure sensor, miniDIN10 CL012C Differential pressure sensor, miniDIN11 CL013A Ultrasonic position sensor (SONAR), miniDIN, gab/met12 CL014A Light intensity sensor, miniDIN13 CL016B Temperature sensor, short thermocouple with stainless steel sheath, miniDIN12 CL016D Temperature sensor, flexible thermocouple, miniDIN13 CL016E Temperature sensor, long thermocouple with stainless steel sheath, miniDIN, -50 to
150 ºC14 CL019B Voltage sensor, miniDIN15 CL019C Voltage sensor, miniDIN15 CL020B Electric current sensor, miniDIN16 CL020C Electric current sensor, miniDIN16 CL021 Magnetic field sensor, miniDIN18 CL028A Short acoustic sensor with stand
17 CL034 Temporary switch with digital output and power supply 24 VCC141 CL035 Signal conditioner for physiology – pneumograph and kimograph44 EQ001F Kersting inclined plane45 EQ001P Inclined plane with sensors and data scrolling multi timer50 EQ002N Rotational equipment, multi timer with data treatment, 5 inputs and scrolling, 5 VCA52 EQ005J Mechanics kit with electromagnetic releaser, 24 VCA49 EQ006B Large C-Clamp23 EQ007.1N Tubular dynamometer, 1N23 EQ007.2N Tubular dynamometer, 2N23 EQ007.2NM Tubular dynamometer with magnetic fixture, 2N23 EQ007.5N Tubular dynamometer, 5N23 EQ007.5NM Tubular dynamometer with magnetic fixture, 5N23 EQ007.10gf Tubular dynamometer, 10gf23 EQ007.10N Tubular dynamometer, 10N23 EQ007.10NM Tubular dynamometer with magnetic fixture, 10N141 EQ016D Pneumograph with sensor, interface and software57 EQ020M Air track with flow unit and xt spark registration
TABLE OF CONTE
NT
S
59 EQ024A Physical pendulum kit69 EQ028B Hooke’s Law kit and Archimedes Principle81 EQ029A Master equipotential surfaces kit 19 EQ030A Digital power supply 0 to 25 VCA / 5 A - 0 to 127 VCA / 2 A19 EQ030B Digital power supply 0 to 25 VCA / 5 A - 0 to 220 VCA / 2 A18 EQ030C Programmable digital power supply for electrochemistry - 0 to 9.9 A / 20
VCA20 EQ030F Digital power supply 0 to 30 VCA / 5 A – stabilized 20 EQ030J Nadal digital power supply 0 to 25 VCA / 5 A – stabilized 67 EQ032E Forces panel with tripod67 EQ032G Forces panel with tripod for mechanics29 EQ033A Panel for hydrostatic II35 EQ037E Boyle-Mariotte’s kit with manometer34 EQ037F Emilia gases study kit with manometer141 EQ042 Small size surgical table105 EQ045A3 Catelli plane optical bench, double beam106 EQ045B Linear optical bench107 EQ045G Linear optical bench84 EQ047B Electrostatic generator kit, Van De Graaff’s generator, 400kV95 EQ051 Kit for demonstration of heat transfer - gel104 EQ053 Double vessel calorimeter with resistor, 250 mL127 EQ055B Senior science cabinet for four groups128 EQ060 Guimarães kit for general physics83 EQ061B Electrostatics kit72 EQ062I Equipment for rotation dynamics, 5 VCA82 EQ065B Variable capacitor with switchable parallel plates kit 80 EQ069 Kit for Lenz-Faraday laws and Foucault’s currents113 EQ072A Kit for determination of the spectral lines of mercury113 EQ072B Kit for determination of spectral lines of sodium117 EQ073C Kit for interferometry with HeNe laser 86 EQ082A Panel for electro-electronic associations 104 EQ085 Double vessel water calorimeter, 250 mL129 EQ088A Kit for thermoelectric thermometry70 EQ090 Torsion scale with laser130 EQ100A General physics master unit, cabinet
38 EQ101 High vacuum chamber, demountable38 EQ101A Low vacuum chamber, demountable83 EQ105A Kit for magnetism30 EQ115A Hydraulic press with manometer, for demonstration36 EQ124P Stokes’ viscometer, multi timer for data treatment, 5 inputs, scrolling, five
sensors and two tubes, 5 VCA66 EQ127 Tuning fork kit 440 Hz69 EQ128 Atomic arrangements, cubic crystals model134 EQ129F Mathematics master unit, with sensors, software and interface, for teachers136 EQ129G Mathematics unit with sensors, software and interface, for each group of
students86 EQ130 Trapezoid galvanometer, D’Arsonval type 100 / 0 / 100 mA86 EQ131 Trapezoid ammeter AC/DC, D’Arsonval type 0 to 8 A86 EQ132 Trapezoid voltmeter AC/DC, D’Arsonval type 0 to 30 V87 EQ156A Panel for Ohm’s laws with insulating towers98 EQ163A Thermoelectric thermometry kit, Seebeck effect48 EQ164A Rotation dynamics interactive kit II119 EQ173C Mechanical waves kit, digital frequency meter, electromagnetic transducer 94 EQ177A DC / AC Electromagnet 120 EQ181F Mechanical wave kit II, adapter for oscilloscope with sensor and software91 EQ182A Advanced demountable transformer100 EQ184B Thermodynamics kit for heat exchanges and thermal expansion of liquids98 EQ185A Kinetic theory of gas kit with electromagnetic transducer87 EQ187A Hoffmann’s voltameter with tripod102 EQ191B Thermodynamics and power control kit112 EQ192 Physical optics and geometrical optics kit to be used with overhead projector31 EQ193A Hinging panels for capillary and meniscus141 EQ194D Computer-assisted kimograph140 EQ194DP Computer-assisted kit including kimograph, pneumograph, and digital
stimulator69 EQ197A Car with retro-propulsion42 EQ200 Matzembacher kit for Young modulus43 EQ200A Kit for determination of Young modulus in metallic wires31 EQ204A Atmospheric pressure kit32 EQ204K Vacuum and pressure chambers kit76 EQ207 Jumping ring or Thomson’s ring
TABLE OF CON
TE
NT
S
116 EQ208D Energy conversion kit with 5W solar battery100 EQ213 Standard thermodynamics kit, calorimetry (dry)49 EQ219 Heliodon21 EQ228F Multi timer with data treatment, scrolling, 5 inputs, sensors, 5 VCA89 EQ230B Panel for electro-electronics124 EQ231G Digital ripple tank with stroboflash – VI41 EQ235B Falling body kit with multi timer for data scrolling and sensor, LM pin, 5 VCA40 EQ235C Falling body kit with multi timer for data scrolling and sensor, 5 VCA78 EQ236B Atwood machine, multi timer with data treatment, 5 inputs, scrolling, 5 VCA61 EQ237B Projector kit, multi timer with data treatment, 5 inputs and scrolling55 EQ238F Air track with 5 VCA data scrolling multi timer, 2 sensors, 24 VCA coil and flow unit96 EQ239C Dilatation kit, digital, electric steam generator, dilatometer105 EQ241 Plane optical bench127 EQ249A The harmful effects of cigarettes 137 EQ251D Kit for solids, surfaces of revolution and sections.127 EQ253 Piaget scale for concept construction114 EQ255A Spectral kit with spectral tubes and high voltage power supply II115 EQ256B Spectral analysis and photoelectric effect kit III123 EQ260B Speed of sound kit with sensor and timer with scrolling data108 EQ262B Advanced optical bench64 EQ263 Rotation dynamics kit for air tables111 EQ265 Kit for the study of Malus Law39 EQ268A Panel with elements of machines and mechanisms – gears, pulleys and jagged bars142 EQ274 Plants nursery65 EQ281 3-axle gyroscope73 EQ282 Equipment for rotation dynamics with sensor and multi timer, 5 VCA24 EQ310 Kit for hydraulics with sensor, software and hydrodynamic interface133 EQ500A Max panel for Foucault currents with timer with scrolling data133 EQ501 Interactive Newton disc for science room131 EQ800A General physics master unit with sensors, interface and software, 24VCA46 EQ801 Inclined plane with sensors and software47 EQ801A Inclined plane with magnetic adhesion sensors and software 51 EQ802B Rotational equipment with sensors and software, 5 VCA33 EQ804K Vacuum and pressure chambers kit, with sensor and software53 EQ805A Mechanics kit with releaser, sensors and software - 24 VCA77 EQ807 HM analyzer with sonar and software
59 EQ808 Physical pendulums kit with sensor and software121 EQ809A Mechanical waves kit with sensor and software99 EQ810A Thermodynamics kit with sensors and software41 EQ811K Falling body kit, with multi timer for data scrolling, sensor, LM pin and software79 EQ812B Atwood machine, with sensor and software, LM101 EQ813 Thermodynamics, calorimetry (dry) kit, with sensor and software30 EQ815A Hydraulic press with sensor and software97 EQ816 Thermal comfort kit with sensor and software109 EQ817 Optical bench with sensor and software61 EQ818 Projector kit with sensor and software56 EQ820C Air track with sensors and software, 24 VCA57 EQ820D Air track with sonar sensors and software, 24 VCA132 EQ823A Kit for architecture and urban design with sensors, software and interface90 EQ830 Panel for electro-electronics with sensors and software29 EQ833 Panel for hydrostatics with sensor and software35 EQ837E Boyle-Mariotte’s kit, with sensor and software34 EQ837F Emilia kit to study gases with sensor and software88 EQ844 Panel for electronics with sensors and software126 EQ846A Planck’s constant – luminescent kit with sensors and software66 EQ856A Resonant blades kit with sensors and software74 EQ862I Equipment for rotation dynamics with sensor and software, 24 VCA92 EQ870A AC and DC electromagnetics kit with sensor and software28 EQ880A Kit for oil extraction and refinery with interface, sensor and software63 EQ887A Air table (Packard’s apparatus) with sensor, software and rotation dynamics kit70 EQ890A Torsion scale with sensors and software37 EQ891C Stokes viscometer with two tubes, four sensors and software139 EQ892B Kit for parabolic and sine waves functions, with sensor and software, 24 VCA137 EQ893A Kit for sine waves, solids and surfaces of revolution, with sensor and software26 EQ894 Liquid dynamics kit, with sensor and software27 EQ895 Kit for water hammers
Experimental activities book:Orientation on how to use the equipment
Put the theoretical knowledge in practice through experimental activities in the real world
Getting to know the equipment
Theoretical foundations and assembling instructions Experimental activities
In the section designed for teacher, you will find the “get to know”, which contains a description of each component of the equipment along with its identification and functions.
You will have a theoretical revision of the topics related to the equipment where images and pictures explaining how they should be used, the maintenance process and each experiment’s assembling mode are presented.
Teachers are supported in the development of experimental activities through the students’ section, thus contributing for the teaching-learning process.
Cidepe equipment comes with a unique feature: the experimental activities book. A full and constantly updated manual which is intended to assist users in order to take full advantage of our products. The manuals come with a section to assist teachers and students’ activities section.
6
Experiment with calorimetric block Capacitor charge and dischargeMonitoring of temperatures in a calorimeter Example of a circuit for data acquisition for Ohm’s Law
Software for data acquisition and Lab200 USB interface, 5 VCA
CL005C
This software and interface kit, developed for Windows XP / 7 / 8, is important for data acquisition from experiments. The software collects and stores data to be analyzed in charts and graphs. The interface may be connected to computers through the USB port. It is intended to send signals acquired from sensors to computers.
• Communication interface with PCs and tablets through USB port and several other devices such as PALM and cell-phones through files exchange.
Applications:
7
INSTRUMENTATION
AND ACQUISITIO
N
Usual applications:• Acquire real-time signals from sensors;• Measure the variables of experiments carried out with the equipment.• Design graphs and charts with data collected;• Record and export data to spreadsheets, for instance, Excel and Matlab;• Time and store events.
Interface characteristics:• It comes with four analog inputs that enable signals from diverse sensors to be captured. For instance, pressure sensors, force sensors, position sensors, light intensity sensors, power sensors, current sensors, temperature sensors, etc.;• It comes with four inputs for connecting digital sensors, thus enabling events for different types of timing to be captured;• Computer connection, through the USB port;• Maximum acquisition rate: 5,000 samples per second;• Headcount rate: 10,000 samples per second;• Supply: 85 to 250 VAC – automatic.
Tools for signal acquisition
Tools for charts
Tools for graphs
Timers
Software characteristics:Designed for Windows XP/ 7/ 8
8
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Force sensor, miniDIN
Absolute pressure sensor, miniDIN
CL011
CL012B Applications:
Applications:
Range of operation: 0 to 10 NResolution: 0.1 NFunction: it is intended to measure dynamic and static force electronically.
• Metal fixture provides stability;• Robust, with a steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Range of operation: 20 to 250 kPaResolution: 0.25 kPaFunction: it is intended to measure static and dynamic pressure in closed containers.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Force measurement;Oscillation of a spring-mass system
Data capture with the toolOscilloscope of CidepeLab software
Lowering the pressure inside a vacuum chamber
Atmospheric pressure Low pressure (Low vacuum)
9
INSTRUMENTATION
AND ACQUISITIO
N
Medição indireta de vazão Medição indireta de vazão
Differential pressure sensor, miniDIN
CL012C
Range of operation: 0 to 250 mm H2OResolution: 0.25 mm H20Function: it is intended to measure the difference of pressure between two points.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Applications:
10
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Sine wave acquisition Graph Sine functions – with sonar
Ultrasonic position sensor (SONAR), miniDIN, gab/met
CL013A
Range of operation: 0.2 to 1.5 mResolution: 1.5 mmFunction: it is intended to be used in several machines for ultrasonic measure of position versus time.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
11
INSTRUMENTATION
AND ACQUISITIO
N
Light intensity sensor, miniDIN
Temperature sensor, flexible thermocouple, miniDIN
CL014A
CL016D
Range of operation: 0 to 5000 luxFunction: it is intended to measure light intensity electronically.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Range of operation: -50 to 150 oCResolution: 0.2 oCFunction: it is intended to measure temperature in fluids.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Applications:
Applications:
Study of light intensity based on the distance from the light source (CL014A) Results obtained with the light sensor (CL014A)
Monitoring of temperature in a calorimeter (CL016D)
12
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Monitoring of temperature in a calorimeter
Temperature sensor, short thermocouple with stainless steel sheath, miniDIN
CL016B
Range of operation: -50 to 150 ºCResolution: 0.2 ºCFunction: it is intended to measure temperature electronically.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab). Applications:
In use with the refining chamber (EQ880A) Coupled with a metal rod (EQ880A)
Temperature sensor, long thermocouple with stainless steel sheath, miniDIN, -50 to 150 ºC
CL016E
Function: it is intended to measure temperature electronically.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
13
INSTRUMENTATION
AND ACQUISITIO
N
Applications:
Graph: V versus t – capacitor charge and discharge
Voltage sensor, miniDINCL019B
Range of operation: -20 to 20 VResolution: 0.05 VFunction: it is intended to measure the difference of electric potential electronically.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Capacitor charge and discharge
Power measurement in a light bulb parallel circuit
14
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Monitoring the voltage and current in the panel (EQ230B)
It can be used to obtain the threshold voltage (Vo) of the emitting diode (CL019C)Determination of Planck’s constant with sensors (CL019C)
Voltage sensor, miniDIN
Electric current sensor, miniDIN
CL019C
CL020B
Range of operation: -5 to 5 VResolution: 0.01 VFunction: it is intended to measure the difference of electric potential electronically.
Range of operation: -200 a 200 mAResolution: 0.5 mAFunction: it is intended to measure the intensity of electric currents.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Applications:
Applications:
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
15
INSTRUMENTATION
AND ACQUISITIO
N
Electric current sensor, miniDIN
Magnetic field sensor, miniDINCL020CCL021
Range of operation: -20 to 20 mAResolution: 0.05 mAFunction: it is intended to measure the intensity of electric currents.
• Metal fixture provides stability;• Robust, with aluminum and stainless steel cabinet;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Range of operation: -10 to 10 GResolution: 0.02 GFunction: it is intended to measure the magnetic field.
• Metal fixture provides stability;• It works with software and data acquisition interface (Lab 100 USB CidepeLab, Lab 200 USB CidepeLab).
Determination of Planck’s constant – with sensors. It can be used to obtain the threshold voltage (Vo) of the emitting diode
Graph: Magnetic field measurement in a Helmholtz coil
Applications:
With Helmholtz coil
Applications:
16
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Examples of applications of CL034
Examples of applications of CL010
Photoelectric sensor barrier (photogate), miniDIN
Temporary switch with digital output and power supply 24 VCC
CL010
CL034
Function: it is intended to measure time intervals.
Function: it is intended to supply the 24 VDC tripping and retention coils or send tripping signals to timers, multi timers and CidepeLab interfaces, indicating when the experiment starts.
• Robust, with stainless steel cabinet.
• Metal fixture provides stability;• Robust, with stainless steel cabinet;• It works both with the digital multi timer with scrolling, the digital timer or the Cidepe data acquisition interface.
Applications:
17
INSTRUMENTATION
AND ACQUISITIO
N
EQ030CProgrammable digital power supply for electrochemistry - 0 to 9.9 A / 20 VCA
Function: DC electric supply in electrochemistry experiments.
• Stabilized and regulated programmable output from 0 to 9.9 ACC;• Digital ammeter with resolution of 0.1 ACC;• Highest voltage 20 VCA;• Highest power 200 W;• 10% variation for line regulation: lower than 0.05 %;• Charge regulation from 0% to 100%: lower than 0.1 %;• Electronic protection against short circuit;• Convection cooling;• Selectable power supply: 127 VCA / 220 VCA, 50 Hz / 60 Hz.
CL028AShort acoustic sensor with stand
Function: it is intended to measure the speed or sound, echo, am-plitude, wavelength, etc.
• Metal fixture provides stability and resistance to sensor.
18
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ030ADigital power supply from 0 to 25 VCA / 5 A - 0 to 127 VCA / 2 A
EQ030BDigital power supply from 0 to 25 VCA / 5 A - 0 to 220 VCA / 2 A
Function: DC power supply in several experiments, including electricity and electromagnetism.
• Regulated and stabilized adjustable output from 0 to 25 VCA (two bands) / 5 ACC;• Adjustable AC output (0 to network voltage) / 2 A;• Digital voltmeter, resolution of 0.1 VCA;• 10% variation for line regulation: lower than 0.05 %;• Charge regulation from 0% to 100%: lower than 0.1 %;• Full load ripple: lower than 15 mVpp;• Electronic protection against short circuit;• 20 VCA / 8 A AC fixed output;• Forced ventilation cooling;• Power supply: 127 VCA, 50 Hz / 60 Hz.
Function: DC power supply in several experiments, including electricity and electromagnetism.
• Regulated and stabilized adjustable output from 0 to 25 VCC (two bands) / 5 ACC;• Adjustable AC output (0 to voltage) / 2 A;• Digital voltmeter, resolution of 0.1 VCA;• 10% variation for line regulation: lower than 0.05 %;• Charge regulation from 0% to 100%: lower than 0.1 %;• Full load ripple: lower than 15 mVpp;• Electronic protection against short circuit;• 20 VCA / 8 A AC fixed output;• Forced ventilation cooling;• Power supply: 220 VCA, 50 Hz / 60 Hz.
19
INSTRUMENTATION
AND ACQUISITIO
N
EQ030FDigital power supply from 0 to 30 VCA / 5 A – stabilized
EQ030JNadal digital power supply from 0 to 25 VCA / 5 A – stabilized
Function: DC power supply in several experiments, including elec-tricity and electromagnetism.
• Regulated and stabilized adjustable output from 0 to 30 VCC / 5 ACC;• Digital LCD voltmeter, resolution of 0.1 VCA;• Digital LCD ammeter, resolution of 0.1 ACC;• Electronic protection against short circuit • 5 VCA / 1A fixed output;• Forced ventilation cooling;• Selectable power supply: 127 VCA / 220 VCA, 50 Hz / 60 Hz.
Function: CC power supply in several experiments, including electricity and electromagnetism
• Regulated and stabilized adjustable output from 0 to 25 VCA (two bands) / 5 ACC;• Digital voltmeter, resolution of 0.1 VCA;• 10% variation for line regulation: lower than 0.05 %;• Charge regulation from 0% to 100%: lower than 0.1 %;• Full load ripple: lower than 15 mVpp;• Electronic protection against short circuit;• 20 VCA / 8 A fixed output;• Forced ventilation refrigeration;• Selectable power supply: 127 VCA / 220 VCA, 50 Hz / 60 Hz.
20
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ228FMulti timer with data treatment, scrolling, 5 inputs and sensors5 VCA
• Software not required;• Computer not required;• It measures and determines time intervals, periods, frequency, speeds, accelerations, motion energy, etc.;• It measures and stores from 1 to 4, 10, 20 and 30 time intervals.
Function: to measure consecutive time intervals for transition between and by sensors (from 1 to 5 sensors), measure 10 consecutive time intervals for motion by the same sensor; measure the time interval of the object movement between the start of a coil and a sensor; measure, simultaneously, the time intervals of colliding objects, registering up to 30 data collection instances; determine speed, the speed of motion under the sensor, and the final speed; determine the object’s acceleration; measure the period of periodic movement carried out by a physical body (Simple Harmonic Motion, Circular, etc.), determine the frequency of the movement carried out by a physical body (Simple Harmonic Motion, Circular, etc.); measure the speed out sound; determine the kinetic energy of an object; determine the initial kinetic energy of an object before motion; auto-shooting mode; manual shooting for the measurement of up to 10 consecutive time intervals regardless of sensors; increment and decrement of insertion digits. The identification and presentation of measured values is done through data scrolling, without the need for a computer.
Exemplos de utilizações:
Measure the speed in the Atwood machine (EQ236A)
Measure the initial speed in a ramp
21
INSTRUMENTATION
AND ACQUISITIO
N
EQ228A presentation screens
Measure the speed of sound with the sensor CL028A
Measure the frequency with the kit for rotation dynamics
Measure the frequency with the resonant blades kit
22
INSTRUMENTATION
AND ACQUISITIO
N
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ007.2NM Tubular dynamometer with magnetic fixture, 2 N
EQ007.5NM Tubular dynamometer with magnetic fixture, 5 N
EQ007.10NM Tubular dynamometer with magnetic fixture, 10 N
DynamometersFunction: to measure the intensity of tractive force in any direction due to its being mechanically adjusted to resetting.
EQ007.1N Tubular dynamometer, 1 N
EQ007.2N Tubular dynamometer, 2 N
EQ007.5N Tubular dynamometer, 5 N
EQ007.10gf Tubular dynamometer, 10 gf
EQ007.10N Tubular dynamometer, 10 N
23
INSTRUMENTATION
AND ACQUISITIO
N
Kit for hydraulics with sensor, software and hydrodynamic interface – hydrodynamicsEQ310
Function: it is geared towards the study of fluid mechanics, fluid dynamics, closed-tube manometers, hydraulic pumps, Rey-nolds number, flow, constant flow, variable flow, hydraulics, yield regimes, energy equation, laminar yield, energy line, piezome-tric line, distributed load loss, relative influence of localized load
losses, stagnation pressure, elbows and bends, enlargement and narrowing, localized load loss, hydraulic piping systems, relative influences between the piping system and load lines, gear flow dis-tribution, siphons, lifting systems, ramified systems, flow in ramified ducts, lifting height and manometric height, booster sets, cavita-
tion, equivalent conducts, water intake between two tanks, mano-metric pressure, serial and parallel piping systems, associations of serial and parallel pumps, etc.• Software for data acquisition, Windows XP / 7 / 8 it exports data to software such as Excel and MatLab.
Fluid Mechanics
24
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Graphs: Applications:
Load loss in a hydraulic system An example of how the siphon operates in sinks
Formation of cavities in ducts Doser to visualize the laminar flow
Instruments for flow adjustmentReynolds Experiment – intermediate flow Reynolds Experiment – turbulent flowReynolds Experiment – laminar flow
Portability• It does not require special installations;• It operates on conventional benches;• Average dimension of panels: width 900 mm, height 1300 mm and depth 500 mm.
Conveniences • Panels and components are screen-painted;• Quick hitch connection (no glue or tools);• Ducts are supported with magnetic fixture.
Fluid Mechanics
Low energy and water consumption• 1.5 l of water in a closed circuit;• Highest power 50 W, 12 VCA / 2 A, no risk of electric shock.
Analog and digital meters• The experiment may be computer-assisted.
Transparent ducts
Flow control• Pumps systems with electronic flow control.
25
PHYSIC
S
Function: it is geared towards the study of fluid mechanics, Stevin’s principle, fluid dynamics (open and closed-tube manometers, hydraulic pumps, Reynolds number, constant flow, variable flow), hydraulics (yield regimes – laminar, intermediate and turbulent, energy equation, energy line, piezometric line, distributed load loss, enlargement and narrowing); hydraulic piping systems (gear flow distribution, booster sets, lifting and manometric height, booster sets, lifting kit power, cavitation).
• It does not require special installations and operates on conventional benches. It uses less than 1 liter of water in a closed circuit and presents low energy consumption (25 W – 12 V) – safe and easy to use;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ894Liquid dynamics kit with sensor and software
Applications:
Reynolds Experiment – laminar flow
Reynolds Experiment – turbulent flow
Reynolds Experiment – intermediate flow
Fluid Mechanics
26
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Pressure peak graph after operation of shut-off valve
Computer-assisted water hammer
Fluid Mechanics
Function: it is geared towards the study of fluid mechanics, fluid dynamics, water hammers, pressure peaks, hydraulic pumps, constant flow, variable flow, hydraulics, distributed load loss, hydraulic piping systems, lifting systems and manometric height, etc.
• It does not require special installations and operates on conventional benches. It uses less than 1 l of water in a closed circuit and presents low energy consumption (25 W – 12 V) – safe and easy to use;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ895Kit for water hammers
27
PHYSIC
S
Function: it is geared towards the study of the applications of fluid mechanics, extraction through fluid pumping from a smaller reservoir to a larger storage tank; fluid transfer by gravity; comparative refinement system, waste cleaning through collection, admission, heating and separation.
• Ring resistance, with steatite and power of 250 W;• Software for data acquisition, for Windows XP / 7 / 8, it exports data to software such as Excel and MatLab;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ880AKit for oil extraction and refinery with interface, sensor and software
Applications:
Fractionating tower with data acquisition
Pumps from refrigeration and extraction systems with rotameter
Larger storage reservoir
Fluid Mechanics
28
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ033APanel for hydrostatics II
EQ833Panel for hydrostatics with sensor and software
Function: it is geared towards the study of pressure in a point of a liquid at equilibrium, thrust, Archimedes principle, Stevin’s principle, Pascal’s principle, difference between force and pressure, atmospheric pressure, open and closed-tube manometers, hydraulic press, etc.
Function: it is geared towards the study of pressure in a point of a liquid at equilibrium, thrust, Archimedes principle, Stevin’s principle, Pascal’s principle, difference between force and pressure, atmospheric pressure, open and closed-tube manometers, hydraulic press, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Applications:
Applications:
Observation of the Archimedes principle for thrust
Quick connection of the pressure sensor
Graph of pressure in a point of the system
Fluid Mechanics
29
PHYSIC
S
EQ115AHydraulic press with manometer, for demonstration
EQ815AHydraulic press with sensor and software
Applications:
Applications:
Adjusting the valve
Connection between the sensor and valve
Function: it is geared towards the study of fluid mechanics, hydrostatics, Pascal’s principle, hydraulic press, fluid dynamics and hydraulic pumps.
Function: it is geared towards the study of fluid mechanics, hydrostatics, Pascal’s principle, hydraulic press, fluid dynamics and hydraulic pumps.
• It enables the conduction of experiments with data acquisition or conventional ones.
Fluid Mechanics
30
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Function: it is geared towards the study of cohesive forces, adhesive forces, capillarity, concave meniscus, convex meniscus, capillarity between parallel boards, capillarity between wedge plates, capillarity and conditions for occurrence, etc.
EQ193AHinging panels for capillary and meniscus
Capillarity in wedge plates
Function: it is geared towards the study of pressure, atmospheric pressure, Magdeburg’s experiment, etc.
EQ204AAtmospheric pressure kit
Applications:
Pressure inside the vacuum chamber with sensor CL012B being lowered Atmospheric pressure Low chamber pressure
Fluid Mechanics
31
PHYSIC
S
EQ204KVacuum and pressure chambers kit
Function: study of cavities under different pressures.
Preparation of a test chamber (EQ204K, EQ804K) Adjusting the valve for the gas compression experiment in the chamber (EQ204K, EQ804K)
Expansion of test chamber (EQ204K, EQ804K) Control of valves and pressure regulators inside the vacuum chamber (EQ204k, EQ804K)
Applications:
Fluid Mechanics
32
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ804KVacuum and pressure chambers kit, with sensor and software
Function: computer-assisted study of chambers under different pressures.
• It enables the conduction of experiments with data acquisition or conventional ones.
Top view of valves, regulators and sensor system (EQ804K)
Applications:
Fluid Mechanics
33
PHYSIC
S
EQ037FEmilia gases study kit with manometer
EQ837FEmilia gases study kit with sensor and software
Function: it is geared towards the study of fluid statics, the behavior of confined space gases and the behavior of such gases before pressure, temperature and volume; Boyle-Mariotte’s Law.
• Millimetric advancement with control of round and fraction count.• It enables the conduction of experiments with data acquisition or conventional ones.
Function: it is geared towards the study of fluid statics, the behavior of confined space gases and the behavior of such gases before pressure, temperature and volume; Boyle-Mariotte’s Law.
• Millimetric advancement with control of round and fraction count.
Compressing the gas sample (EQ037F, EQ837F)
Round and fraction control
Graph Pressure x Volume of a gas sample (EQ037F, EQ837F)
Applications:
Fluid Mechanics
34
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Function: it is geared towards the study of fluid statics, the behavior of confined space gases and the behavior of such gases before pressure, temperature and volume; Boyle-Mariotte’s Law.
• Millimetric advancement with control of round and fraction count.
Function: it is geared towards the study of fluid statics, the behavior of confined space gases and the behavior of such gases before pressure, temperature and volume; Boyle-Mariotte’s Law.
• Millimetric advancement with control of round and fraction count.• It enables the conduction of experiments with data acquisition or conventional ones.
EQ037EBoyle-Mariotte’s kit with manometer
EQ837EBoyle-Mariotte’s kit with sensor and software Fluid
Mechanics
35
PHYSIC
S
EQ124PStokes’ viscometer, multi timer for data treatment, 5 inputs, scrolling, five sensors and two tubes, 5 VCA
Releasing the specimen (EQ124P, EQ891C) Dragging the specimen (EQ124P, EQ891C)
Graph of the speed of a falling specimen in a viscous media
Applications:
Function: it is geared towards the study of Stokes’ viscometer, free fall motion in a vis-cous media, Stokes’ Law, acting forces on a falling body in a viscous media, thrust force, drag forces, Reynolds’ number, viscosity, absolute viscosity, dynamic viscosity, kinematic viscosity, determination of the terminal speed of a sphere in a liquid, etc.
Fluid Mechanics
36
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Releasing the specimen (EQ124P, EQ891C) Dragging the specimen (EQ124P, EQ891C)
Graph of the speed of a falling specimen in a viscous media
Applications:
Function: it is geared towards the study of Stokes’ viscometer, free fall motion in a viscous media, Stokes’ Law, acting forces on a falling body in a viscous media, thrust force, drag forces, Reynolds’ number, viscosity, absolute viscosity, dynamic viscosity, kinematic viscosity, determination of the terminal speed of a sphere in a liquid, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ891CStokes viscometer with two tubes, four sensors and software
Fluid Mechanics
37
PHYSIC
S
EQ101High vacuum chamber, demountable
EQ101ALow vacuum chamber, demountable
Function: it is used in experiments that require the need for a rarefied environment.
Function: it is used in experiments that require the need for a rarefied environment.
Applications:
Low pressure inside the chamber using EQ204A
Fluid Mechanics
38
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ268APanel with elements of machines and mechanisms – gears, pulleys and jagged bars
Function: it is geared towards the study of pulleys, gears, jagged bars, racks and pinions, levers, mechanical advantage, mechanical power, moment of force, rigid body’s equilibrium, (kinematics of rigid bodies: 2D movement, rigid body’s rotation: kinematic of rotations), (rotation dynamics: conservation of angular momentum, moment of inertia).
Applications:
SolidMechanics
39
PHYSIC
S
EQ235C Falling body kit with, multi timer for data scrolling and sensor, 5 VCAFunction: it is geared towards the study of mechanics, particle kinematics, 1D movement, particle dynamics, Newton’s Laws, work and energy, conservation of mechanical energy, etc.
An application with a fence-like specimen
An application with a spherical specimen
Y versus T graph for free fall
Position of sensor for proper reading
Applications:
SolidMechanics
40
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Free fall data acquisition with a specimen with ten similar intervals (EQ235B, EQ811K)
Free fall data acquisition with a specimen with ten different intervals (EQ235B, EQ811K)
Free fall data acquisition with a specimen with two intervals (EQ235B, EQ811K)
EQ811KFalling body kit, with multi timer for data scrolling, sensor, LM pin and software
Function: it is geared towards the study of mechanics, particle kinematics, 1D movement, particle dynamics, Newton’s Laws, work and energy, conservation of mechanical energy, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ235BFalling body kit with multi timer for data scrolling and sensor, LM pin, 5 VCA
Function: it is geared towards the study of mechanics, particle kinematics, 1D movement, particle dynamics, Newton’s Laws, work and energy, conservation of mechanical energy, etc.
SolidMechanics
41
PHYSIC
S
Function: it is geared towards the study of modulus of elasticity, Young modulus, stress, deformation, Poisson relation, Hooke’s Law, etc.
EQ200Matzembacher kit for Young modulus
Applications:
Attaching the dynamometer to the indicator
Bar clamped at one of the ends
Calibration
SolidMechanics
42
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ200AKit for determination of Young modulus in metallic wires
Function: it is geared towards the study of the following solid mechanics topics: modulus of elasticity, Young modulus, stress, deformation, Poisson relation, Hooke’s Law, etc.
Applications:
Safety lock for mass sets Measuring the elongation of the steel wire
Mass set to vary the tensions in the wireMirror ruler to avoid parallax
SolidMechanics
43
PHYSIC
S
EQ001FKersting inclined plane
Function: it is geared towards the study of co-linear forces, concurrent coplanar forces, equilibrium of a body in a ramp, static and kinetic friction, rectilinear motion, uniformly accelerated linear motion, rectilinear motion in a viscous media, particle dynamics, transverse radius and energy discussions.
Applications:
Determining the object’s weight
Example of friction force
SolidMechanics
44
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ001PInclined plane with sensors and data scrolling timer
Function: it is geared towards the study of co-linear forces, concurrent coplanar forces, equilibrium of a body in a ramp, static and kinetic friction, rectilinear motion, uniformly accelerated linear motion, rectilinear motion in a viscous media, particle dynamics, transverse radius and energy discussions, moment of inertia, rotation mechanics, transverse radius, etc.
Example of the influence of the transverse radius
Example of the plane with two photoelectric sensors
Applications: Solid
Mechanics
45
PHYSIC
S
Function: it is geared towards the study of co-linear forces, concurrent coplanar forces, equilibrium of a body in a ramp, static and kinetic friction, rectilinear motion, uniformly accelerated linear motion, rectilinear motion in a viscous media, particle dynamics, transverse radius and energy discussions, moment of inertia, rotation mechanics, transverse radius, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
Applications:
Measuring the motion speed of a sphere (EQ801, EQ801A, EQ001F e EQ001P)
Graph showing the moment two objects moving in different directions meet (EQ801, EQ801A, EQ001F and EQ001P)
Measuring the average speed using the interface
SolidMechanics
EQ801Inclined plane with sensors and software
46
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ801AInclined plane with magnetic adhesion sensors and software
Attaching the sensor magnetically (EQ801A)
Starting point of a spherical specimen (EQ801A)
Starting point of a circular specimen (EQ801A)
Function: it is geared towards the study of co-linear forces, concurrent coplanar forces, equilibrium of a body in a ramp, static and kinetic friction, rectilinear motion, uniformly accelerated linear motion, rectilinear motion in a viscous media, particle dynamics, transverse radius and energy discussions, moment of inertia, rotation mechanics, transverse radius, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
Applications: SolidMechanics
47
PHYSIC
S
EQ164ARotation dynamics interactive kit II
Applications:
The conservation of angular momentum with platform and gyroscope and locked chair
The conservation of angular momentum with platform and dumbbell and locked chair
Observation of centripetal force and centrifugation
Radius dependence in centripetal force
The conservation of angular momentum with rim gyroscope
Function: it is geared towards the study of rotation dynamics, principle of inertia, effects caused by the variation of angular momentum, observation of alterations in a liquid’s surface form due to centripetal force, etc.
SolidMechanics
48
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ006BLarge C-Clamp Function: fixation of frames, sensors and scales.
Applications:
SolidMechanics
EQ219Heliodon
Applications:
Function: to make the understanding of the appar-ent motions of the Sun easier, the way it is seen from the Earth; to estimate the length of the solar day and sunset and sunrise times any day of the year, any-where on the planet, etc.
It is intended to show the most adequate position to start construction works; it enables farmers to choose the most appropriate time for planting and harvest-ing in a determined region.
Solar motion, as seen from the South Pole in the summer
Fixing frames
Fixing sensor CL021 Solar motion, as seen from the South Pole in the winter Latitude adjustment
49
PHYSIC
S
Applications:
It is suitable for projec-tions (EQ002N, EQ802B)
Arrows – effects (EQ002N, EQ802B)
EQ002NRotational equipment, multi timer with data treatment, 5 inputs and scrolling, 5 VCA
Function: it is geared towards the study of kinematics and dynamics of material points and rigid bodies, benchmarks, uniform circular motion, variable circular motion, Kepler’s Laws, planets’ orbits, simple harmonic motion, motion equations, energy discussions, etc.
It operates both vertically, for group work, and horizontally, on overhead projectors, for larger group works.
With two sensors (EQ802B, EQ002N)
SolidMechanics
Opticsand Waves
50
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ802BRotational equipment with sensors and software, 5 VCA
Function: it is geared towards the study of particle mechanics, particle kinematics, 2D motion, Kepler’s Laws, planets’ orbits, particle dynamics, work and energy, principles of conservation, conservation of mechanical energy, rigid body mechanics, rigid body rotation, rotation kinematics, transverse radius, rotation dynamics, waves, simple harmonic motion, amplitude, wavelength, frequency, period.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
Applications:
With arrows – shade effect (EQ002N, EQ802B)
It is suitable for projections (EQ002N, EQ802B)
SolidMechanics
Opticsand Waves
51
PHYSIC
S
EQ005JMechanics kit with electromagnetic releaser, 24 VCA
Function: it is geared towards the study of mechanics, pendulum, springs, thrusts, rollers, amount of motion, moment of inertia, col-lisions, horizontal launch, work and energy, simple harmonic mo-tion, particle and rigid body dynamics, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;
Fluid Mechanics
SolidMechanics
Opticsand Waves
52
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ805AMechanics kit with releaser, sensors and software - 24 VCA
Function: it is geared towards the study of particle mechanics, particle kinematics, 2D motion, particle dynamics, Newton’s Laws, equilibrium, work and energy, mechanical advantage, conservation principles, mechanical energy conservation, conservation of the amount of motion, elastic collision, rigid body mechanics, rigid body rotation, rotation kinematics, rotation dynamics, moment of inertia and conservation of the amount of motion, simple pendulum, fluid mechanics, hydrostatics, Archimedes’ principle, determination of densities, waves, oscillatory motion, simple harmonic motion, damped harmonic motion, mechanical waves, longitudinal mechanical waves, amplitude, beat, wavelength, frequency, period, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
Fluid Mechanics
SolidMechanics
Opticsand Waves
53
PHYSIC
S
Graph: Spring mass system with a force sensor (EQ805A)
Archimedes’ principle. 1 – Non-submerged body. 2 – Submerged body (EQ005J, EQ805A)
Measure of the starting speed, with the sensor (EQ805A)
Applications:
Stable equilibrium of a supportive body (EQ005J, EQ805A)
Parallel hoist (EQ005J, EQ805A)
Fluid Mechanics
SolidMechanics
Opticsand Waves
54
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Function: it is geared towards the study of solid mechanics, equilibrium conditions in a ramp, uniformly accelerated linear motion (with positive, negative, constant and variable acceleration), speed, mass and acceleration, inertia, energy conservation, buoyancy, amount of motion, conservation of the amount of linear motion, linear elastic collisions, linear inelastic collisions, energy discussions, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;
EQ238FAir track with 5 VCA data scrolling multi timer, 2 sensors, 24 VCA coil and flow unit
SolidMechanics
55
PHYSIC
S
Function: it is geared towards the study of solid mechanics: statics, kinematics and dynamics, rectilinear motion and uniformly accelerated linear motion, positive and negative acceleration, inertia, energy conservation, buoyancy, amount of movement, collisions, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ820CAir track with sensors and software, 24 VCA
SolidMechanics
56
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ820DAir track with sonar sensors and software, 24 VCA
Function: it is geared towards the study of the main fundamentals of mechanics and its laws: speed, rectilinear motion, mass and acceleration, uniformly accelerated linear motion, positive and negative acceleration, inertia, energy conservation, buoyancy, amount of motion, conservation of the amount of linear motion, elastic and inelastic collisions, falling bodies, energy discussions, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ020MAir track with flow unit and xt spark registration
Function: it is geared towards the study of the main fundamentals of mechanics and its laws: speed, uniformly accelerated linear motion, positive and negative acceleration, inertia, buoyancy, energy conservation, equilibrium conditions in a ramp, amount of motion, conservation of the amount of linear motion, elastic and inelastic collisions, energy discussions, etc.
Spark registration on thermal sensitive paper allows for xt analysis.
SolidMechanics
57
PHYSIC
S
Rectilinear motion graph
Elastic collision graph
Use of CL034 as a releaser
Pulley with sensor (EQ820C, EQ238F)Holes that allow for plane leveling (EQ020M, EQ238F, EQ820C, EQ820D)
Uniformly linear motion with varied velocity (EQ820C, EQ820D)
Thermal tape sparking (EQ020M)Car with activating rod and sensor (EQ238F, EQ820C) Car with activating fence (10 intervals) and sensor (EQ238F,
EQ820C)
An example of car 2 being used for sparking (EQ020M)
An example of car 1 being used for sparking (EQ020M)
Applications:
SolidMechanics
58
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ024APhysical pendulum kit
Function: observation of the position of the center of mass using different means. It enables the observation of the physical pendulum motion, measurement of parameters, analysis of periodical motions, physical pendulum laws, etc.
Function: observation of the position of the center of mass using different means. It enables the observation of the physical pendulum motion, measurement of parameters, analysis of periodical motions, physical pendulum laws, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ808Physical pendulums kit with sensor and software
SolidMechanics
Opticsand Waves
59
PHYSIC
S
Regulating the length of the wire of the simple pendulum (EQ808, EQ024A)
Specimen situations (EQ024A, EQ808)
Isochronous timing (EQ808)Measuring the period with the sensor (EQ808)
Examples of use with specimens and photoelectric sensors (EQ808)
Applications:
SolidMechanics
Opticsand Waves
60
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ237BProjector kit, multi timer with data treatment, 5 inputs and scrolling
EQ818 Projector kit with sensor and software
Function: it is geared towards the study of horizontal, oblique e perpendicular projections, energy conservation, moment of inertia and its relations with mass distribution, momentum conservation, collision, total momentum in a particle system, elastic collisions, inelastic and perfectly inelastic collisions, ballistic pendulum, etc.
Function: it is geared towards the study of horizontal, oblique e perpendicular projections, energy conservation, moment of inertia and its relations with mass distribution, momentum conservation, collision, total momentum in a particle system, elastic collisions, inelastic and perfectly inelastic collisions, ballistic pendulum, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
SolidMechanics
61
PHYSIC
S
Applications:
Effects with the ballistic pendulum (EQ237B, EQ818) Measuring the initial speed with a photoelectric sensor and without ballistic panel (EQ237B, EQ818)
Measuring the initial speed in the ballistic pendulum (EQ818)
Determining the minimum height (EQ237B, EQ818)
Flying time in an oblique projection (EQ237B, EQ818)
SolidMechanics
62
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ887AAir table (Packard’s apparatus) with sensor, software and dynamic rotation kit
Frontal elastic collision (EQ087A, EQ887A)
Applications:
Simulating Rutherford scattering (EQ087A, EQ887A)
Rotation dynamics using the barrier sensor (EQ887A)
Function: it makes the learning of the main fundamentals of mechanics and its laws easier: speed, motion, mass and acceleration, accelerated motion, positive and negative acceleration, energy conservation, buoyancy, amount of motion, elastic and inelastic collisions, rotation dynamics, Newton’s Laws, action and reaction, inertia, amount of motion, impulse, circumferential and circular motion, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
SolidMechanics
Opticsand Waves
63
PHYSIC
S
EQ263Rotation dynamics kit for air tables
Function: it is geared towards the study of rotation dynamics, Newton’s Laws, action and reaction, inertia, amount of motion, impulse, circumferential and circular motion, etc.
• It works with the air table (Packard Plane) EQ087A.
Applications:
Turning off the retro propeller by remote control
Activating the remote control receiver
Using it with a barrier sensor
SolidMechanics
Opticsand Waves
64
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ2813-axle gyroscope
Function: it is geared towards the study of angular momentum, of gyroscopic effect and the exploitation of the phenomena associated with rotation dynamics.
Vertical and horizontal scales for angular measures
Mass variation for the conservation of the angular momentum
Starting the gyroscope’s pulley
Applications:
SolidMechanics
65
PHYSIC
S
EQ856AResonant blades kit with sensors and softwareFunction: it is geared towards the study of resonance
• It enables a better understanding of wave reception by cell phone, radio, television, vision, hearing, etc;• It enables the conduction of experiments with data acquisition or conventional ones.
Applications:
Using the magnetic field sensor
Resonance graph
Using the photoelectric sensor and interface
Using the magnetic field sensor and interface
Opticsand Waves
Function: it is geared towards the study of sound
EQ127Tuning fork kit 440 Hz
66
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ032EForces panel with tripod
Function: it is geared towards the study of mechanics, force composition and decomposition, etc.
Function: it is geared towards the study of mechanics, force composition and decomposition, simple machines, simple har-monic motion, springs and their associations, work and energy, etc.
EQ032GForces panel with tripod for mechanics
Applications:
Scale with mirrors (EQ032E, EQ032G)
Action of concurrent forces (EQ032E, EQ032G)
SolidMechanics
67
PHYSIC
S
1st class lever (EQ032G)
Applications:
Concurrent forces at 120° (EQ032E, EQ032G) Equilibrium of a rigid body (EQ032E, EQ032G)
Exponential hoist tackle (EQ032G) Mechanical advantage bar (EQ032G) 3rd class lever (EQ032G)
SolidMechanics
68
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ028BHooke’s Law and Archimedes’ Principle kit
Function: it is geared towards the study of the laws of physics related to buoyancy, Archimedes’ principle, helical springs, equilibrium of an object suspended by a spring, restoring force, notions of particle dynamics, constant elasticity of a spring, Hooke’s Law, work and energy in a spring, simple harmonic motion, etc.
EQ128Atomic arrangements, cubic crystals model
Function: it is geared towards the study of atomic arrangement in cubic crystals made of pure metals, whose atoms may be grouped in a primitive cubic (ps), body-centered cubic (bcc) and face-centered cubic (fcc), etc.
EQ197ACar with retro-propulsion
Function: it is geared towards the study of Newton’s Laws, action and reaction, inertia, fundamental law, amount of motion, impulse, rectilinear motion, etc.
Applications:
Determination of acceleration with the position and data sensor x, t
SolidMechanics
Fluid Mechanics
SolidMechanics
69
PHYSIC
S
EQ090Torsion scale with laser
Function: it enables the study of the moment of inertia, torque, determination of the elastic torsion constant by the static method, determination of the elastic torsion constant by the dynamic method, sensitivity of torsion systems, determination of the moment of inertia in a bar, simple angular harmonic motion, pseudoperiodic angular harmonic motion, operation of the D’Arsonval current meter, appraisal of magnetic induction, etc.
EQ890ATorsion scale with sensors and software
Function: it enables the study of the moment of inertia, torque, determination of the elastic torsion constant by the static method, determination of the elastic torsion constant by the dynamic method, sensitivity of torsion systems, determination of the moment of inertia in a bar, simple angular harmonic motion, pseudoperiodic angular harmonic motion, operation of the D’Arsonval current meter, appraisal of magnetic induction, measurement of the amplitude of the oscillatory motion using a magnetic field sensor.
• It enables the conduction of experiments with data acquisition or conventional ones.
SolidMechanics
Opticsand Waves
70
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Determination of the intensity of the B magnetic field inside a coil(EQ090, EQ890A)
Determination of the torsion constant of a wire by the dynamic method (EQ890A)
Graph: Torsion constant of a wire
Applications:
SolidMechanics
Opticsand Waves
71
PHYSIC
S
EQ062IEquipment for rotation dynamics, 5 VCAFunction: it is geared towards the study of solid mechanics, rigid body mechanics, rigid body kinematics, 2D motion, rigid body rotation, rotation kinematics, rotation dynamics, centripetal force, gravitation, conservation of angular momentum, conical pendulum, etc.
SolidMechanics
72
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ282Equipment for rotation dynamics with sensor and multi timer, 5 VCAFunction: it is geared towards the study of solid mechanics, rigid body mechanics, rigid body kinematics, 2D movement, rigid body rotation, rotation kinematics, rotation dynamics, centripetal force, gravitation, conservation of angular momentum, conical pendulum, etc.
Using the photoelectric sensor with the multi timer
SolidMechanics
73
PHYSIC
S
EQ862IEquipment for rotation dynamics with sensor and software, 24 VCCFunction: it is geared towards the study of solid mechanics, rigid body mechanics, rigid body kinematics, 2D movement, rigid body rotation, rotation kinematics, rotation dynamics, centripetal force, gravitation, conservation of angular momentum, conical pendulum, etc.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
Using the photoelectric sensor with the interface
Applications:
SolidMechanics
74
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Positioning the photoelectric sensor (EQ282, EQ862i)
Applications:
Regulating the centripetal force (EQ062i, EQ282, EQ862i)
Adjusting the dynamometer (EQ062i, EQ282, EQ862i)
Recognizing the reading position (EQ062i, EQ282, EQ862i)
SolidMechanics
75
PHYSIC
S
EQ207Jumping ring or Thomson’s ring
Applications:
Showing the ring under electromagnetic forces Showing the ring as it rests
Function: it is geared towards the study of electromagnetic forces, etc.
Eletricidade eMagnetismo
76
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ807HM analyzer with sonar and software
Applications:
Function: it enables the study of both simple and damped oscillations.
• It enables the conduction of experiments with data acquisition or conventional ones.
Positioning the coil
Graph: Damped HM
Attaching the larger disc for the damped HM Spring-mass system with sonar
Opticsand Waves
Eletricidade eMagnetismo
77
PHYSIC
S
Applications:
Object’s initial position (EQ236B, EQ812B) Roller with sensor (EQ236B, EQ812B)
Graph: Y versus T in the Atwood machine (EQ236B, EQ812B)
Function: it is geared towards the study of particle mechanics, particle kinematics, 1D movement, uniformly accelerated linear motion, particle dynamics, Newton’s Laws, equilibrium, 1D movement, work and energy; conservation principles, solid mechanics, rigid body mechanics, center of mass, rigid body dynamics, rigid body rotation, rotation kinematics, rotation dynamics, determination of the moment of inertia, amount of motion and inertia moment.
EQ236BAtwood machine, multi timer with data treatment, 5 inputs, scrolling, 5 VCA
SolidMechanics
78
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Function: it is geared towards the study of particle mechanics, particle kinematics, 1D movement, uniformly accelerated linear motion, particle dynamics, Newton’s Laws, equilibrium, 1D movement, work and energy; conservation principles, solid mechanics, rigid body mechanics, center of mass, rigid body dynamics, rigid body rotation, rotation kinematics, rotation dynamics, determination of the moment of inertia, amount of motion and moment of inertia.
• It works with the digital multi timer with scrolling, digital timer or the Cidepe data acquisition interface;• It enables the conduction of experiments with data acquisition or conventional ones.
EQ812BAtwood machine, with sensor and software, LM
Applications:
Atwood’s experiment - uniformly accelerated rectilinear motion
SolidMechanics
79
PHYSIC
S
EQ069Kit for Lenz-Faraday laws and Foucault’s currents
Function: it is geared towards the study of electromagnetism, Foucault’s currents, induced currents, Eddy currents, magnetic brakes, Lenz-Faraday’s Laws, etc.
Applications:
Capsule is placed in the tube
Using the pendulum body 2
Using the pendulum body 1
Using the pendulum body 3
Eletricidade eMagnetismo
80
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ029AMaster equipotential surfaces kit
Function: it is geared towards the study of electric field, equi-potential lines, equipotential surfaces, etc.
Applications:
Some examples of equipotential surfaces and electric field for analysis
Eletricidade eMagnetismo
81
PHYSIC
S
Applications:
EQ065BVariable capacitor with switchable parallel plates kit
It can be coupled with square platesIt can be coupled with larger circular platesThe relationship between capacitance and the reverse of the distance between the plates It can be connected to the terminal of the capacitor’s plate
The relationship between capacitance and the distance between the plates
Function: it is geared towards the study of capacitance between parallel plates from different areas, the influence of the dielectric between the plates, etc.
• Sliding scale to zero.
Eletricidade eMagnetismo
82
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ061BElectrostatics kit
Applications:
EQ105AKit for magnetism
Magnetic field generated by a bar magnet using a magnetic spectrum table
Magnetic field generated by a transformer’s armature
Function: it is geared towards the study of magnetism, magnetic field, magnetic induction, earth’s magnetic field, etc.
Function: it is geared towards the study of electrostatics, the observation of electric charges, the differentiation between electric charges in electrified bodies, etc.
Eletricidade eMagnetismo
83
PHYSIC
S
Function: it is geared towards the study of electrostatics, the laws of electric charges, electric induction by friction, contact, induction, atmospheric discharges, force lines configuration, visual analysis of the electric field between electrodes of different shapes, etc.
EQ047BElectrostatic generator kit, Van De Graaff’s generator, 400kV
Applications:
Electric field lines between charges of opposing signals
Electrostatic discharge in the auxiliary sphere
Charge generator system
Eletricidade eMagnetismo
84
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Fun activities
Electronic turnstile for projection
Electrostatic discharge between spheres
Visualization of field lines using an overhead projector
Eletricidade eMagnetismo
85
PHYSIC
S
EQ082APanel for electro-electronic associations
Applications:
Measuring the capacitance of a parallel association of capacitors
Function: it is geared towards the study of resistors, light bulbs, capacitors and diodes and their serial, parallel and mixed associations, charge and discharge in capacitors, etc.
EQ131Trapezoid ammeter DC/AC, D’Arsonval type 0 to 8 A – to be used in class
EQ130Trapezoid galvanometer, D’Arsonval type 100 / 0 / 100 mA
EQ132Trapezoid voltmeter DC/AC, D’Arsonval type 0 to 30 V – to be used in classFunction: it is used in several experiments: it may
be used as an indicator of balance in bridgewires; it may indicate the direction of induced current between magnets and coils, etc. Function: it is used in several experiments to measure
both alternated and continuous currents.Function: it is used in several experiments, including with demountable transformers; it may also be used to design equipotential surfaces
Eletricidade eMagnetismo
86
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ156APanel for Ohm’s laws with insulating towers
Applications:
Measurement of resistance throughout the length of a wire
Function: it is geared towards the study of electrical resistance, electrical resistivity and its relations with the length and the nature of the material and the conductor’s straight line segment, Ohm’s Law, bridgewires, Wheatstone bridge, etc.
EQ187AHoffmann’s voltameter with tripod
Applications:
Electrolysis of water
Function: it is geared towards the study of electrolysis, electric dissociation, ionic migration, breaking of water molecules in hydrogen and oxygen atoms, etc.
Eletricidade eMagnetismo
87
PHYSIC
S
EQ844Panel for electronics with sensors and software
Applications:
Picture showing a capacitor’s charge and discharge
Function: it is geared towards the study and basic activities in electronics, resistor associations, Ohm’s Law, Kirchhoff’s laws, capacitance, association of capacitors, diode, a capacitor’s charge and discharge, transistor (as a key, delayed effect key), oscillatory or multivibrator circuits in motion, timer circuit, double layer key circuit or flip-flop circuit, memory circuit, impurities that turn semiconductors into N or P type semiconductors, light-emitting diode, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Eletricidade eMagnetismo
88
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
A RLC circuit (EQ839, EQ230B)
EQ230BPanel for electro-electronicsFunction: it is geared towards the study of several associations, from DC and AC circuits, capacitor’s charge and discharge, Kirchhoff’s Laws, Ohm’s Law, transistor, capacitance, etc.
Eletricidade eMagnetismo
89
PHYSIC
S
Function: it is geared towards the study of several associations, from DC and AC circuits, capacitor’s charge and discharge, Kirchhoff’s Laws, Ohm’s Law, transistor, capacitance, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
EQ830Panel for electro-electronics with sensors and software
Applications:
Graph: Tension in the RLC circuit capacitor (EQ830)
Curve of current and tension in a capacitor using sensors, interface e software (EQ830)
Example of the measurement of the power in a circuit of parallel light bulbs
EQ830
Eletricidade eMagnetismo
90
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ182AAdvanced dismountable transformer
Applications:
Function: it is geared towards the study of AC electromagnetism and electrodynamics, alternated current and tensions, electromagnetic phenomena, step up and step down transformers, energy conservation, etc.
Interaction between the magnetism generated by the coil and a magnet
Magnetic field generated by the transformer’s armature
Eletricidade eMagnetismo
91
PHYSIC
S
EQ870AAC and DC electromagnetics kit with sensor and softwareFunction: it is geared towards the study of electromagnetism, coils, solenoids, demountable transformers, step up and step down transformers, magnetic field, magnetic induction, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Magnetic field generated by a solenoid – on an overhead projector
Magnetic field generated by a bar magnet on the magnetic spectrum table – on an overhead projector
Applications:
Eletricidade eMagnetismo
92
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Magnetic field generated by a circular spiral on an overhead projector
Appraising the intensity of magnetic field in the Helmholtz’s coil
Magnetic field generated by the transformer’s armature
Demountable transformer – association of coils
Data acquisition for Lenz’s Law
Electromagnet - Biot-Savart LawDemonstration of repulsion between parallel conductors
Eletricidade eMagnetismo
93
PHYSIC
S
EQ177ADC / AC Electromagnet Function: it is geared towards the study of magnetic field, magnetic induction, Foucault’s current, electromagnets, Biot-Savart Law, etc.
Applications:
Electromagnet in use Electromagnet – Biot-Savart Law
Eletricidade eMagnetismo
94
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ051AKit for demonstration of heat transfer - gel
Applications:
Attesting convection currents
Heating the thermometer’s bulb by irradiation
Function: it is geared towards the study of the means of heat transfer, to demonstrate transfer by conduction, convection, and irradiation and compare the degree of thermal insulation between different materials, etc.
Thermodynamics
95
PHYSIC
S
EQ239CDilatation kit, digital, electric steam generator, dilatometer
Function: it is geared towards the study of linear dilatation of materials, it determines the coefficient of linear dilatation, the variation of length due to temperature changes, initial length and the type of material.
Applications:
Coupling the specimen with the dial indicator
Data obtained from specimens whose initial length is of 500 mm
Thermodynamics
96
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Heating trend curve with radiation cubeObservation of irradiation of different surfaces Observation of absorption in different surfaces
EQ816Thermal comfort kit with sensor and software
Function: it is geared towards the study of waves, thermodynamics, thermal radiation, etc. It enables the conduction of experiments that attest the absorption and transfer of thermal radiation in several materials and types of surfaces.
• It enables the conduction of experiments with data acquisition or conventional ones.
Thermodynamics
ModernPhysics
97
PHYSIC
S
EQ185AKinetic theory of gas kit with electromagnetic transducer
Function: it is geared towards the study of the kinetic theory of gas, the effects of temperature on the speed of particles, volume and pressure relations under the same temperature, average molecular kinetic energy, internal energy of a perfect gas, what is to be understood by model, etc.
Applications:
An analogy with the agitation of the molecules of a gas
EQ163AThermoelectric thermometry kit, Seebeck effectFunction: it is geared towards the study of thermometry, thermocouple circuits, eletromotive force measurement, serial associations of thermocouples, parallel associations of thermocouples, etc.
Thermodynamics
98
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ810AThermodynamics kit with sensors and software
Applications:
Heating trend curve with radiation cube
Observation of absorption in different surfaces
Observation of the effects of convection for energy discussions
Function: it is geared towards the study of thermodynamics, calorimetry, temperature, heat transfers, thermometric scales, thermal radiation absorption and transfer, vapor pressure, saturated vapor, degree of thermal insulation, linear and volumetric dilatation, heat propagation, heat capacity, mechanical equivalent of heat, thermoelectric thermometry, kinetic theory of gases, Boyle-Mariotte’s Law.
• It enables the conduction of experiments with data acquisition or conventional ones.
Thermodynamics
ModernPhysics
99
PHYSIC
S
EQ184BThermodynamics kit for heat exchanges and thermal expansion of liquids
Function: it is geared towards the study of thermodynamic laws concerning heat transfer, method of mixtures, equivalent in water, changes of state, specific heat, latent heat, thermometric scales and their associations, thermoscope, thermal expansions in liquids, etc.
EQ213Standard thermodynamics kit, calorimetry (dry)
Function: it is geared towards the study of thermodynamics, calorimetry, energy balance in a thermodynamic system, heat capacity (thermal capacity), specific hear (mass-specific heat capacity), heating-related and cooling properties, etc.
Thermodynamics
100
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ813Thermodynamics, calorimetry (dry) kit, with sensor and software
Function: it is geared towards the study of thermodynamics, calorimetry, heat propagation, heat capacity, mechanical equivalent of heat, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Applications:
Determination of the specific heat through data acquisition (EQ813)
Temperature measurement of the calorimetric block (EQ813)
Safety device to remove the calorimeter from the heated block
Thermodynamics
101
PHYSIC
S
EQ191BThermodynamics and power control kit
Function: it is geared towards the study of thermodynamics, kinetics of gases, temperature, heat exchanges, thermometric scales, thermal expansions, thermal radiation absorption and transmission, manometers, barometers, vapor pressure, saturated vapor, heat, degree of thermal insulation, fluid statics, the behavior of gases before pressure, temperature and their volume, linear and volumetric dilatation, picnometry, etc.
Applications:
Observation of convection currents (EQ051A)
Heating by irradiation (EQ051A)
Fluid Mechanics
Thermodynamics
ModernPhysics
102
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Observation of the irradiation of different surfaces Coupling the specimen with the dial indicator (EQ239C)
An experiment with the Gravesande ring with cable (EQ133B) An analogy with the agitation of the molecules of a gas (EQ185A)
Graph: ΔL x t for three specimen of 500 mm (EQ239C)
Pressure x volume (EQ037F)
Applications:
Fluid Mechanics
Thermodynamics
ModernPhysics
103
PHYSIC
S
EQ053Double vessel calorimeter with resistor, 250 mL
Function: it is geared towards the study of thermodynamics and calorimetry, heat exchanges, a substance’s specific heat, thermal capacity, mechanical equivalent of heat, etc.
Function: it is geared towards the study of thermodynamics and calorimetry, heat exchanges, a substance’s specific heat, thermal capacity, mechanical equivalent of heat, etc.
EQ085Double vessel water calorimeter, 250 mL
Monitoring of the temperature in a calorimeter (CL016D)
Applications:
Thermodynamics
104
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ045A3Catelli plane optical bench, double beam
Function: it is geared towards the study of visual impairments, reflection laws, light refraction and refraction laws, vision optics, human eyes, Snell-Descartes laws for refraction, Faraday rotation, etc.
Function: it is geared towards the study of visual impairments, reflection laws, light refraction and refraction laws, vision optics, human eyes, Snell-Descartes laws for refraction, Faraday rotation, introduction to physical optics, etc.
EQ241Plane optical bench
Determining the focus of a concave mirror (EQ241)
Simulating normal vision (EQ045A3, EQ241)
Measuring wavelength (EQ241)
Simulating the farsightedness correction (EQ045A3, EQ241)
Applications:
Applications:
Opticsand Waves
105
PHYSIC
S
EQ045B Linear optical benchFunction: it is geared towards the study of geometrical optics, physical optics, continuous spectrum, discontinuous spectrum, wavelength measurement, polarization, etc.
Opticsand Waves
106
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Function: it is geared towards the study of geometrical optics, physical optics, spectral analysis, continuous spectrum, discontinuous spectrum, absorption spectrum, reflection spectrum, wavelength measurement, introduction to optical fibers, polarization, filtrations, etc.
EQ045G Linear optical bench
Applications:
Color composition by overlapping lights (EQ045G)Grooved diaphragm (EQ045B, EQ045G)Measuring the length of light’s wave (EQ045B, EQ045G)
Opticsand Waves
ModernPhysics
107
PHYSIC
S
EQ262BAdvanced optical bench
Function: it is geared towards the study of physical optics, geometrical optics, spectral analysis, spectra, spectrum of emission of mercury, helium, hydrogen, nitrogen, oxygen, wavelength measurement, visual impairments, polarization, Faraday rotation, reflection, refraction, Young’s Law, etc.
By placing the bulkhead with windows and multiple splits in the equipment
Optical fiber principle Diffraction standard with simple slitBy placing the diffraction net into the equipment
As a height orientating device for the equipment
Applications:
Opticsand Waves
ModernPhysics
108
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ817Optical bench with sensor and softwareFunction: it is geared towards the study of physical optics, geometrical optics, spectral analysis, spectra, spectrum of emission of mercury, helium, hydrogen, nitrogen, oxygen, wavelength measurement, visual impairments, polarization, Faraday rotation, reflection, refraction, Young’s Law, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.Optics
and Waves
ModernPhysics
109
PHYSIC
S
Applications:
Example of the use of a diffraction net (EQ045B, EQ045G EQ262B, EQ817)
Reflection in a plane mirror (EQ045B, EQ045G EQ262B, EQ817)
Total reflection in a prism (EQ045B, EQ045G EQ262B, EQ817)
Laser light diffraction – observation of the length of the slits of a net (EQ045B, EQ045G EQ262B, EQ817)
Reflection in a plane mirror (EQ045B, EQ045G EQ262B, EQ817)
Refraction within the semi-circle (EQ045B, EQ045G EQ262B, EQ817)
Refraction in the semi-circle (EQ045B, EQ045G EQ262B, EQ817)
Total reflection in a prism (EQ045B, EQ045G EQ262B, EQ817)
Focus of converging lens (EQ045B, EQ045G EQ262B, EQ817)
Parallel beams (EQ045B, EQ045G EQ262B, EQ817) Optical fiber principle (EQ045B, EQ045G EQ262B, EQ817)
Opticsand Waves
ModernPhysics
110
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Preparation for the experiment of Malus Law
Iris adjustment
Graph: Light intensity versus light’s polarization angle
EQ265Kit for the study of Malus Law
Function: it is geared towards the study of optical physics, spectral analysis, spectra, light intensity, polarization angle, Malus Law, etc.
Opticsand Waves
Eletricidade eMagnetismo
111
PHYSIC
S
EQ192Physical optics and geometrical optics kit to be used with overhead projectors
Function: it is geared towards the study of geometrical optics, optical physics, electromagnetic waves in the visible band, eclipses, reflection, color composition by overlapping, image formation, diffraction fringes, diffraction, refraction, visual impairments, dispersion, interferences, polarization, continuous spectrum of white lights, spectra of filter absorption, spectra of absorption of transparent materials, spectral analysis, wavelength measurement in a discontinuous spectrum, length of medium waves of a continuous spectrum, observation of reflection spectra, etc.
Applications:
Study of geometrical optics
Experiment for the determination of wavelength using the Young’s method
Details
Color composition Detail
Study of physical optics
Opticsand Waves
ModernPhysics
112
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ072AKit for determination of the spectral lines of mercury
Function: it is geared towards the study of physical optics, interference, diffraction, spectra, electromagnetic waves, etc.
Function: it is geared towards the study of physical optics, interference, diffraction, spectra, electromagnetic waves, etc.
EQ072BKit for determination of the spectral lines of sodium
Opticsand Waves
ModernPhysics
113
PHYSIC
S
EQ255ASpectral kit with spectral tubes and high voltage power supply II
Function: it is geared towards the study of physical optics, interference, diffraction, spectra, electromagnetic waves, wavelength measurement of the spectrum rays of discrete emissions of sodium, hydrogen, helium and mercury, nitrogen, oxygen vapor, etc.
Applications:
Clear visualization of spectral rays
Using the Young’s Method to measure wavelength on an optical bench busbar
Opticsand Waves
ModernPhysics
114
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
EQ072A Side window for UV exhaustion Visualization of spectral raysSpectrum of Mercury emission – Hg
Function: it is geared towards the study of physical optics, interference, diffraction, spectra, electromagnetic waves, and wavelength measurement of the spectrum rays of discrete emissions of sodium, hydrogen, helium and mercury, nitrogen, oxygen vapor, etc.
EQ256BSpectral analysis and photoelectric effect kit III
Opticsand Waves
ModernPhysics
115
PHYSIC
S
EQ208DEnergy conversion kit with 5W solar battery
Applications:
Storing the energy and activating an electrical motor
Measuring tension x current on a motor fed by the system
Function: it is geared towards the study of energy transformations, photovoltaic effect, semiconductors, etc. it enables the observation of the conversion of solar energy into electric and mechanical energy, the selective character of the operation as to the region of the spectrum in which it occurs and the storage of the obtained energy through the solar panel.
Eletricidade eMagnetismo
ModernPhysics
116
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ073CKit for interferometry with HeNe laser
Function: it is geared towards the study of physical phenomena related to interferometry, Michelson’s experiment, etc.
ModernPhysics
117
PHYSIC
S
Mirror with manual displacer
Result of an interference figure
An example of the equipment in use
Alignment with fine adjustment of the reflector
Using the alignment tool for laser
Placer with mirror - front
Positioner with lens - front
Positioning stand with flashlight
Applications:
ModernPhysics
118
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
EQ173C Mechanical wave kit, digital frequency meter, electromagnetic transducer and tension measurement
Function: it is geared towards the study of issues concerning mechanical waves, longitudinal waves, transverse waves, waves on ropes, string waves, noise, amplitude, wavelength, frequency, period, interference, speed, etc.
Nut and bridge of a stationary transversal wave in a string with determined frequency and tensional force
Nut of a longitudinal stationary wave in a helicoid spring with known frequency and tensional force
Opticsand Waves
119
PHYSIC
S
EQ181FMechanical wave kit II, adapter for oscilloscope with sensor and software
Function: it is geared towards the study of issues concerning mechanical waves, longitudinal waves, transverse waves, waves in strings, waves in springs, sound waves, sound, stationary waves in strings and vibrating springs, noise, reverberation, echo, amplitude, wavelength, frequency, period, propagation speed, beating, interference, speed, vibration in plaques, Chladni figures, etc.
Visualization of nuts and crest of a stationary wave in a Kundt tube
Applications:
Opticsand Waves
120
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ809AMechanical waves with sensor and software kit
Function: it is geared towards the study of issues concern-ing mechanical waves, longitudinal waves, transverse waves, waves in strings, waves in springs, sound waves, sound, stationary waves in vibrating springs and strings, noise, reverberation, echo, amplitude, wavelength, fre-quency, period, speed of propagation, beating, interfer-ence, speed, vibration in plaques, Chladni figures, super-ficial mechanical waves, reflection and diffraction, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Visualization of nuts and crest of a stationary wave in a Kundt tube
Light sensor graph
Applications:
Opticsand Waves
121
PHYSIC
S
Applications:
Nodal figure formed with the square vibrating plate with F3 frequency
Circular waves in a ripple tank
Interference between circular waves in a ripple tank Nodal figure formed with the square vibrating plate with F4 frequency
Nodal figure formed with the circular vibrating plate with F2 frequency
Nodal figure formed with the circular vibrating plate with F1 frequency
Opticsand Waves
122
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ260BSpeed of sound kit with sensor and timer with scrolling data
Function: it is geared towards the study and measurement of the speed of sound.
Applications:
Measuring the speed of sound in the air
Opticsand Waves
123
PHYSIC
S
Applications:
Interference between actual plane waves with those reflected in a heat shield at 45º
Circular waves in a ripple tank
Refraction of circular waves in a ripple tank
Interference between the waves generated at the core of a circular heat shield with those reflected onto a ripple tank
Reflection of plane waves on a circular heat shield converging to the focus
Function: it is geared towards the study of 2D mechanical waves.
• It comes with an electromagnetic transducer, frequency control, digital fre-quency meter, stroboflash with and without synchrony, reflector and panel.
EQ231GDigital ripple tank with stroboflash – VI
Opticsand Waves
124
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Vibrator being attached to the tripod’s rod
Ripple tank being used for projection in the roof
Ripple tank on the overhead projector *the overhead projector does not come with the product
Top view of the lighter with the cold light matrix
Applications:
Opticsand Waves
125
PHYSIC
S
EQ846APlanck’s constant luminescent kit with sensors and software
Applications:
Function: it is geared towards the study and determination of Planck’s constant by luminescence, semiconductors, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Determining Planck’s constant with multimeters
Obtaining the threshold tension (Vo) of the emitting diode
Determining Planck’s constant with sensors
Opticsand Waves
126
PHYSICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Function: it is geared towards the study of sciences in Elementary and Middle School, and is suitable for more than 30 students in up to four groups, at the same time.
• It can be used in Physics, Chemistry and Biology classes.
EQ055BSenior science cabinet for four groups
Applications:
Reflection onto the plane mirror. Refraction onto the semicircle. Observing the fan due to the conservation current.
EQ249AThe harmful effects of cigarettes
EQ253Piaget scale for concept construction
Function: it enables the study of the harmful effects of cigarettes and detection of CO2.
Function: it is geared towards the study of the construction of concepts according to Piaget, etc.
127
SETS
EQ060Guimarães kit for general physics
Function: it is geared towards the study of solid and fluid mechanics, optics, thermodynamics, waves, electricity, electromagnetism, magnetism, etc.
Applications:
Concurrent forces at 120º
Motion in a fluidSimulating normal vision Electric field lines Arrows – shade effect
128
SETS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ088AKit for thermoelectric thermometry
Function: it is geared towards the study of thermometric laws, circuits with thermocouples, measurement of the electromotive force, determination of thermoelectric power, commercial thermocouples, compensation wires, serial and parallel associations of thermocouples, differential thermocouple, etc.
Details
Differential thermocouple
Seebeck effect
129
SETS
Applications:
EQ100AGeneral physics master unit, cabinet
Function: it is geared towards the study of solid mechanics, fluid mechanics, thermodynamics, geometrical optics, physical optics, oscillations and waves, electrostatics, electricity, magnetism, electromagnetism, among many other areas.
Interference in a ripple tankElectric field lines between punctual charges
Electric discharge in the auxiliary sphere
Concurrent forces at 120º
Projection of a Uniform Circular Motion on a heat shield
130
SETS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ800AGeneral physics master unit with sensors, interface and software, 24VCA
Function: it is geared towards the study of particle mechanics, particle kinematics, particle dynamics, conservation principles, collisions, rigid body mechanics, fluid mechanics, thermodynamics, geometrical optics, physical optics, waves, oscillatory motion, mechanical waves, longitudinal mechanical waves, stationary waves, transverse waves, helicoids spring waves, waves in liquid means, electromagnetic waves, electricity, static electricity, DC electrodynamics, AC electrodynamics, magnetism, electromagnetism.
• It enables the conduction of experiments with data acquisition or conventional ones.
Applications:
Meeting time of two objects Monitoring of the temperature of a calorimeter
Heating of the thermometer bulb by irradiation Action of current forces
131
SETS
Function: it is geared towards the study of the modulus of elasticity, Young modulus, in embedded and supported bars, application of the concepts of energy, units, thermometry, heat and its forms of transfer, illuminance, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
EQ823AKit for architecture and urban design with sensors, software and interface
132
SETS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ500AMax panel for Foucault currents with timer with scrolling data
EQ501Interactive Newton disc for science roomFunction: it is geared towards the study of light composition considering the time the image stays in the retina
Function: it is geared towards the study of electromagnetic phenomena, Lenz’s Law, Foucault’s currents, induced currents, eddy currents, magnetic brake, etc.
133
SCIENCE R
OO
M
EQ129FMathematics master unit, with sensors, software and interface, for teachers
Function: it is geared towards the experimental study of mathematics by addressing the concepts of measures, errors, lines in a plane, angles (vertical, corresponding, internal, complementary, alternate, collateral), parallelism, transverse lines, triangles, plane and 3D figures, solids of revolution, areas, volumes, trigonometric functions, Pythagorean theorem, Law of Cosines, etc.
134
MATHEMATICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Direct measurement of volume
Parabola
Construction of a scalene triangle
Construction of an equilateral triangle
Visualizing a toroidal surface
View of the cut in the surface of revolution
Hyperboloid surface of revolution
View of the cut in the surface of revolution
Acquisition of data for designing the parabola
Solid of revolution – sphere
Circular section
Solid of revolution – cylinder
Section - ellipse
135
MATHEMATICS
Applications:
EQ129GMathematics unit with sensors, software and interface, for each group of students
Function: it is geared towards the study of the following topics: measures, errors; trigonometry, triangles (rectangle, scalene, isosceles); metric relations of the rectangle triangle; Pythagorean theorem; trigonometric functions; Law of Cosines; plane geometry: lines in a plane, angles (vertical, corresponding, internal, complementary, alternate, collateral); parallelism; transverse lines; plane figures; spatial geometry: 3D figures; areas; volumes; surfaces of revolution; solids of revolution; cylinder of revolution, cylindrical sections, cone of revolution, conic sections, sphere of revolution; areas; volumes, etc.
Cylinder of revolution with cylindrical ellipse section
Cone of revolution with conic ellipse section
Cone of revolution with circular conic section
Sphere of revolution with circular spherical section
136
MATHEMATICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
Function: it is geared towards the study of solids, surfaces of revolu-tion, sections, etc.
EQ893AKit for sine waves, solids and surfaces of revolution, with sensor and software
Function: it is geared towards the study of mathematics, by addressing figures of revolution, sine functions, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Applications:
Acquisition of sine waves – graph
EQ251DKit for solids, revolution surfaces and sections
137
MATHEMATICS
A toroidal surface
View of the cut in the surface of revolution
Hyperboloid surface of revolution
View of the cut in the surface of revolution
Solid of revolution: cone – ellipse conic section
Solid of revolution: cone – conic circle section
Solid of revolution: sphere – circle section
Spherical specimen Generating line figure in a semicircleGenerating line figure in a rectangle
Solid of revolution: cone – conic hyperbole section
Applications:
138
MATHEMATICS
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Applications:
EQ892BKit for parabolic and sine waves functions, with sensor and software, 24VCC
Function: it is geared towards the study of parabolic and sine waves functions, graphs, tables, etc.
• It enables the conduction of experiments with data acquisition or conventional ones.
Study of quadratic function, parabola - with sonar Study of sine waves, sines – with sonar
139
MATHEMATICS
EQ194DPComputer-assisted kit including kimograph, pneumograph, and digital stimulator
Function: it is geared towards the study of skeletal muscles, non-skeletal muscles, muscle physiology (All or Nothing response, staircase effect, muscular tetany, muscular fatigue, comparative study of neurotransmitters, degrees of muscular excitability and contractility, among others). It enables the capture of cardiac activities in small-size Guinea pigs with a graphic registration of contractions in the stimulated organs and for the comprehension of the concepts of pulmonary ventilation, geared towards the practical application of the study of spirometry, thus allowing for the registration of the main alterations of pulmonary volume when inhaling and exhaling, according to pulmonary activities, besides the application of the discoveries of Galvani, Lapicque, etc.
It comes with software for data acquisition and Lab200 interface for several experiments with data acquisition. The software was developed for Windows XP / 7 / 8, acquiring real time data through the computer’s USB port. Collected data may be saved for further analysis and comparisons. The acquired curves may be printed through tables and graphs, which may be applicable to diverse studies.
140
PHYSIOLOG
Y
Check the analytical and remissive indexes of the manuals of our equipment on our website.
EQ194DComputer-assisted kimograph
EQ016DPneumograph with sensor, interface and software
CL035Signal conditioner for physiology – pneumograph and kimograph
EQ042Small size surgical table
Function: it is geared towards the study of skeletal muscles, non-skeletal muscles, muscle physiology (All or Nothing response, staircase effect, muscular tetany, muscular fatigue, comparative study of neurotransmitters, degrees of muscular excitability and contractility, among others).
• It enables the capture of cardiac activities in small-size Guinea pigs with a graphic registration of contractions in the stimulated organs. It comes with software for data acquisition and Lab200 interface for several experiments with data acquisition.
• The software was developed for Windows XP / 7 / 8, acquiring real time data through the computer’s USB port. Collected data may be saved for further analysis and comparisons. The acquired curves may be printed through tables and graphs, which may be applicable to diverse studies.
Function: it is geared towards the study of the concepts of pulmonary ventilation. It is also geared towards the practical application of the spirometry studies, allowing for the registration of the main alterations in the pulmonary volume when inhaling and exhaling, according to pulmonary activities.
• It comes with software for data acquisition and Lab200 interface for several experiments with data acquisition, such as the respiratory rhythm and the effects of the factors that may interfere in the normal respiratory rhythm. The software was developed for Windows XP / 7 / 8, acquiring real time data through the computer’s USB port. Collected data may be saved for further analysis and comparisons.
• The acquired curves may be printed through tables and graphs.
Function: to condition the signal sent by the pneumograph or kimograph to the Lab200 interface.
Function: the surgical table is fundamental and used both for scientific and educational purposes, due to its character in enabling experimental surgeries and the introduction of fundamental concepts related to physiology.
Applications:
Pneumograph in use
141
PHYSIOLO
GY
Function: analysis and comparisons of budding of similar seeds with diversified irrigation processes (amount of water, acid solutions, basic solutions, diversified hormones, among others), comparisons between several seeds (budding time, root size, response to irrigation and diverse soils) and comparison of the budding time of modified seeds, conditioned to the type of soil they are seeded.
EQ274Plants nursery
Applications:
Testing of several plants in several types of soil and different irrigation methods
It enables the observation of the full development of the seeds
The growth of roots, stem and other structures may be analyzed and quantified
It may compared to other types of plants
Every story based on pioneering and hard work focused on clients’ needs makes Cidepe increasingly popular in the lives of thousands of students, thus bringing more interested students to experience knowledge.
Relying on an experienced team of engineers, professors, doctors, consultants and other employees, Cidepe has developed cutting-edge products and human talent to improve teaching dynamics in Brazilian institutions and abroad, in Physics, Biology, Chemistry, Sciences, Physiology, Mathematics, Architecture and Engineering.
THE EDUCATION OF THE FUTURE, TODAY.
142
BIOLOGY
Check the analytical and remissive indexes of the manuals of our equipment on our website.
Every story based on pioneering and hard work focused on clients’ needs makes Cidepe increasingly popular in the lives of thousands of students, thus bringing more interested students to experience knowledge.
Relying on an experienced team of engineers, professors, doctors, consultants and other employees, Cidepe has developed cutting-edge products and human talent to improve teaching dynamics in Brazilian institutions and abroad, in Physics, Biology, Chemistry, Sciences, Physiology, Mathematics, Architecture and Engineering.
THE EDUCATION OF THE FUTURE, TODAY.
Cidepe D Unit - Showroom, PD&I and training
143