Catalog Electronic Test Measurement Equipment

ND3% BASE1 XXXX3669-2162-1-Page 2162 TSQ: 3001 CMS: CMS- USM TS host OP: NN COMP: 28-07-09 Hour: 08:33 TS: TS date TS time

2162

9

Find Datasheets OnlineBENCH TEST EQUIPMENT

OSCILLOSCOPES & LOGIC ANALYZERS

STIBOINFO((NEWARK_MAIN_C124_2162)) C-2162 M-2162 Y-2162 B-2162 USEXP1-2162

Mfg.Part No. TDS1000B/2000B Series TPS2000 Series TDS3000C Series DPO3000 Series DPO4000 Series MSO4000 Series Description Stock No.1103 Probe Power Supply 83F2208A621 X X X X X X 1000A RMS, 50kHz Current Probe 01F2438A622 X X X X X X 100A AC/DC Current Probe 01F2474A6302 Current probe, 20A DC, DC-50MHz, 12-pin 83F2190CT2 X X X X Current XMFR; 200MHz 36A w/Probe 11B2402CT6 CT6 Current Probe, High-Freq/Small Geometry 90B1530K420 X X X X Workstation cart 83F2203P2220 X X X 1X/10X Passive Probe, 200MHz, 300V, 30V 11J4782P3010 10x Passive Probe 92B6773P5050 Probe, Passive; 500 MHz, 10X, W/RO for TDS 5000 Series 39C9892

P5100 X X X X X 100x 250MHz 2.5kv Probe 01F2422P5102 10x 100MHz Passive Probe 83F2180P5120 X 20x 200MHz 1000Vrms Probe 11J4783P5200 X X* Active Differential Probe 83F2204P5205 X* X X X X 1.3kv, 100MHz High-Voltage Probe 83F2205P5210 X X X X X 5.6kv, 50MHz High Voltage Probe 83F2206P6015A X X X X X 1000x, 75MHz 40kv Probe 85F019P6021 X X X X X X 60MHz AC Current Probe, 7A RMS 83F2211P6022 X X X X X X 120MHz AC Current Probe 83F2212P6101B X X X X X X 1x, 15MHz Passive Probe 83F2213

P6109B 10x, 100MHz Passive Voltage Probe w/Readout 01F2479P6117 10x Passive Probe for THS700 Series Oscilloscopes 83F2023P6131 10x 300MHz Modular Probe W/RO 11B2429P6139A X X X X 10x, 500MHz Passive Probe 83F2218P6158 X X X X 20x, GHz Low Capacitance Probe 51B1264P6205 X X 10x, 750MHz Active FET Probe* 83F2221P6243 X X 10x, 1GHz <1pF Active FET Probe* 11B2439P6245 X 10x, 1.5GHz <1pF Active FET Probe 83F2222P6246 X X X X X 400MHz Differential Probe (1X/10X)* 50B7808P6247 X X X Probe, Diff, 1GHz BW, TPI (1X, 10X)* 90B2295

P6248 X X X Probe; 1.7GHz Differential 90B9417P6330 Probe; Differential; 3.5 GHz BW 24C1357RM3000 X Rack Mount Kit 48F1572RM4000 X X Rackmount Kit; For DPO4000 & MSO4000 Series Oscilloscopes 69K6770RMD3000 X Rackmount Kit; for DPO3000 Series Oscilloscopes 84M7357TAP1500 X X X 1.5GHz TekVPI Active FTI Probe 69K6771TAP2500 X Test Probes, Bandwidth Max:2.5GHz 79K2022TCP0150 X X DC 20MHz, 150A Probe 53M2971TCP202 X X DC Coupled Current Probe 85F021TCP303 X X X DC 100MHz, 150A Probe 29H2811

TCP305 X X X X X AC/DC Current Measurement System 54H3787TCP312 X X X DC 100MHz, 30A 20H0225TCP404XL X X X X X Current Amplifier 54H4815TCPA300 X X X X Current Amplifier 20H0193TCPA400 X X X X High-Range Current Amplifier 54H4607TDP0500 X X X 500MHz High-Voltage Differential Probe with TekVPI Interface 23M9705TDP1000 X X X Probe; Differential; 1.0 GHz 23M2862TDP1500 X X Probe; Differential; 1.5 GHz (1X/10X) 88M0416

(148832)

(72453)

QUICK REFERENCE CHARTTEKTRONIX OSCILLOSCOPE PROBES AND ACCESSORIES

*Requires 1103 Probe Power Supply when used with TDS1000.

ND3% BASE1 XXXX3670-2163-1-163 TSQ: 3001 CMS: CMS- USM TS host OP: NN COMP: 28-07-09 Hour: 08:33 TS: TS date TS time

21631.800.463.9275 • Find our complete selection at www.newark.com

9

Find the Latest Technologies Online BENCH TEST EQUIPMENT



SPECIFICATIONS TPS2012 TPS2014 TPS2024Channels 2-Isolated 4-Isolated 4-IsolatedBandwidth (MHz) 100 100 200Sample Rate (GS/s) Per Channel 1.0 1.0 2.0Record Length 2.5 K Points on All ModelsVertical Resolution 8-Bit (Normal or With Averaging)Vertical Sensitivity 2 mV to 5V/div on All Models

with Calibrated Fine AdjustmentVertical Accuracy ±3% on All ModelsVertical Zoom Vertically Expand or Compress a Live

or Stopped WaveformIsolated External Trigger Input Standard on All ModelsFloat Voltage (When use with P2220 Probes) 30V rms FloatingFloat Voltage (When use with P5120 Probes) 600V rms CAT II or 300V rms CAT III FloatingPosition Range 2 mV to 200 mV/div ±2V;

>200 mV to 5 V/div ±50VBandwidth Limit 20 MHz for All ModelsLinear Dynamic Range ±5 divTime Base Range 5 ns to 50 s/div 5 ns to 50 s/div 2.5 ns to 50 s/divTime Base Accuracy 50 ppmInput Impedance 1MΩ ±2% in Parallel with 20 pFInput Coupling AC, DC, GND on All ModelsHorizontal Zoom Horizontally Expand or Compress

a Live or Stopped WaveformFFT Standard on All ModelsRS-232, Centronics - Parallel Ports Standard on All ModelsPC Connectivity Standard on All ModelsIntegrated CompactFlash Mass Storage Standard on All ModelsBND Power Option Includes 4 x P5120 Passive High VoltageProbes;

TPS2PWR1 Power SoftwareTPS2PWR1 Power Software Instantaneous Power Waveform Analyis, Waveform

Analysis, Harmonics Analysis, Switching Loss, Phase Angles, dv/dt and di/dt Cursors

TDS Series 1001B 1002B 1012B 2002B 2004B 2012B 2014B 2022B 2024BInput Channels

2 Analog

2 Analog

2 Analog

2 Analog

4 Analog

2 Analog

4 Analog

2 Analog

4 Analog

Calculated RiseTime 5 mV/div(Typical)

<8.4ns <5.8ns <3.5ns <5.8ns <5.8ns <3.5ns <3.5ns <2.1ns <2.1ns

MaximumRecordLength

2.5k Points

2.5k Points

2.5k Points

2.5k Points

2.5k Points

2.5k Points

2.5k Points

2.5k Points

2.5k Points

AnalogBandwidth*(-3dB)

40MHz 60MHz 100MHz 60MHz 60MHz 100MHz 100MHz 200MHz 200MHz

MaximumSample Rate(All channels)

500 MS/s 1 GS/s 1 GS/s 1 GS/s 1 GS/s 1 GS/s 1 GS/s 2 GS/s 2 GS/s

Display Mono Mono Mono Color Color Color Color Color Color

Mfg. Part No. Description Stock No. Price EachTPS2012 100MHz, 2-Channel, 1GS/s Digital Storage Oscilloscope 11J4788 2990.00TPS2014 100MHz, 4-Channel, 1 GS/s Digital Storage Oscilloscope 11J4789 3330.00TPS2024 200MHz, 4-Channel, 2 GS/s Digital Storage Oscilloscope 11J4790 3630.00

ACCESSORIES

AC2100 Softside Transit Case 11J4780 98.00P2220 10X - 1X Switchable Passive Test Probe, 200MHz When 10X is

Selected11J4782 107.00

P5120 High-Voltage Passive Probe 11J4783 433.00TPS2PBND Power Bundle: 4 Passive Probes and Power Measurement and

Analysis Software for TPS2000 Series Oscilloscopes11J4784 1750.00

TPS2PWR1 TPS2PWR1 Power Measurement Software 11J4785 530.00

Mfg. Part No. Description Stock No. Price EachTDS1001B 40MHz, 2-Channel Digital Storage Oscilloscope 93K5765 900.00TDS1002B 60MHz, 2-Channel Digital Storage Oscilloscope 93K5766 1100.00TDS1012B 100MHz, 2-Channel Digital Storage Oscilloscope 93K5768 1320.00TDS2002B 60MHz, 2-Channel Digital Storage Oscilloscope 93K5770 1320.00TDS2004B 60MHz, 4-Channel Digital Storage Oscilloscope 93K5772 1730.00TDS2012B 100MHz, 2-Channel Digital Storage Oscilloscope 93K5773 1610.00TDS2014B 100MHz, 4-Channel Digital Storage Oscilloscope 93K5775 2080.00TDS2022B 200MHz, 2-Channel Digital Storage Oscilloscope 93K5777 1940.00TDS2024B 200MHz, 4-Channel Digital Storage Oscilloscope 93K5779 2410.00

CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT

TDS1002B CALIBRATED 60MHz, 2-Channel Calibr. Digital Storage Scope 12M7328 1175.00TDS1012B CALIBRATED 100MHz, 2-Channel Calibr. Digital Storage Scope 17M8749 1395.00TDS2012B CALIBRATED 100MHz, 2-Channel Calibr. Digital Storage Scope 18M5808 1685.00TDS2014B CALIBRATED 100MHz, 4-Channel Calibr. Digital Storage Scope 14M4258 2155.00TDS2022B CALIBRATED 200MHz, 2-Channel Calibr. Digital Storage Scope 20M3578 2015.00TDS2024B CALIBRATED 200MHz, 4-Channel Calibr. Digital Storage Scope 12M6132 2485.00

ACCESSORIESMfg. part no. TNGTDS01 Operator Training Kit provides extensive instructions and step-by-step lab exercises to learnabout the operation of TDS1000B and TDS2000B series oscilloscopes. Kit includes self-paced CD-ROM based manualand signal source board.

Mfg. Part No. Description Stock No. Price EachTNGTDS01 Operator Training Kit 35C2480 365.00SIGEXPTE National Instruments LabVIEW SignalExpress™

Tektronix Edition Software (Full Version)84K8123 699.00

P2220 10X - 1X Switchable Passive Test Probe, 200MHzWhen 10X is Selected

11J4782 107.00

P6101B 1X Passive Test Probe,15MHz, 300Vrms (TwoRecommended)

83F2213 150.00

P6015A 1000X High-Voltage Passive Test Probe, 75MHz 85F019 1570.00P5100 2.5kV, 250MHz, 100X High-Voltage Passive Probe 01F2422 402.00P5200 High-Voltage Active Differential Test Probe, 25MHz 83F2204 803.00TEK-USB-488 GPIB-to-USB Adapter 69K6773 651.00AC2100 Softside Transit Case 11J4780 98.00HCTEK4321 Hardside Transit Case — Requires Mfg. Part No.

AC2100 Softside Case; Order Separately Above69K6768 675.00

RM2000B Rackmount Kit 11M2084 322.00(88735)

TDS1000B AND TDS2000B SERIES DIGITAL STORAGE OSCILLOSCOPES

TPS2000 SERIES DIGITAL STORAGEOSCILLOSCOPES

TDS1000B and TDS2000B series digital storage oscilloscopes deliver an unbeatable combination of performance andease-of-use, at an affordable price. These scopes provide full sample rate and full record length on all channels foraccurate acquisition, all the time. The USB host and device port enable mass storage, plug-and-play PC connectivity,and direct printing, for flexible and easy data transfer. Comes standard with OpenChoice™ software and NISignalExpress Tektronix Edition software (base version), providing multiple choices in documenting and analyzingmeasurement results, including the capability to pull screen images and waveform data directly into Microsoft® Wordand Excel. Each scopes come complete with mfg. part no. P2220 10X - 1X switchable passive probes (one perchannel), power cord, user manual and NIM/NIST traceable certificate of calibration. Order additional accessories andtest probes separately below and on page 2162.

• Up to 4 Isolated Floating Channels• Isolated External Trigger Input• BND Bundle Option For Power

Measurements, mfg. part no. TPS2PBND,available

• Integrated Mass Storage• Color Display (1⁄4 VGA LCD)• True Portability; Weighs Only 6 lbs. (Without

Batteries)• 8 Hours of Continuous Battery Operation,

one battery included, second batteryoptional

• Hot Swappable Batteries• Autoset• FFT Standard on All Models• Simplified Setup• Built-in I/O Interface• 11 Automatic Measurements

*Bandwidth is 20MHz @ 2mV/div, all models; 200MHz typical between 40°C and 50°C, 200MHz models only

Features and Benefits

Key Performance Specifications:

• Waveform and Set-up Memories• Advanced Triggers• Backlit Menu Buttons• Context Sensitive Help• 3-Year Manufacturer’s Warranty

TPS2000 series oscilloscopes from Tektronix are versatile portable instruments ideal for taking differential mea-surements up to 30V rms floating. When coupled with the BND power option bundle, they are ideal for industrial powerdesigners, installation and maintenance engineers who regularly confront high voltages up to 600V rms CAT II or 300Vrms CAT III floating. When TPS2000 series scopes are used with optional mfg. part no. TPS2PWR1 powermeasurement software, only one instrument is needed for a broad range of measurements, from measuring highvoltages and high currents to debugging control circuits. When combined with OpenChoice® PC connectivity software,your measurement results can be captured, transferred, documented, and analyzed. TPS2000 series scopes have beendesigned with your safety in mind. They employ innovative isolated channel technology, providing either 2- or 4-isolatedchannels (depending on the model) allowing you to safely, accurately and quickly measure three-phase power.TPS2000 series scopes have familiar dedicated knobs and analog style controls, plus simplified functions and setupincluding auto set, auto range, automatic measurements, probe check wizard and context-sensitive help. These scopescan be used effectively in both bright daylight and dimly lit areas by adjusting the brightness and contrast controls andthe backlit menu buttons. TPS2000 series scopes include integrated compact flash mass storage and accept any type 1compact flash card as large as 1 GB. FFT and I/O printer port interface is standard on all models.

• 40, 60, 100, and 200MHz bandwidth models• Sample rates up to 2GS/s on all channels• 2 or 4 analog channels • Color or monochrome LCD display • Suite of advanced triggers• Manufacturer’s limited lifetime warranty• CE complaint

Use TPS2000 series scopes on your bench, in your lab, or in the field with up to 8-hours of continuous battery operation.Hot-swappable batteries allow measurements to continue even while batteries are being replaced. Digital real-timesampling acquisition technology makes it possible to capture high-frequency information, such as glitches and edgeanomalies that eludes other oscilloscopes in its class.

Ease of Use Features:• USB 2.0 host port on front panel for quick and easy data

storage• Plug n’ Play PC connectivity and analysis software solutions• Direct print to all PictBridge® compatible printers via USB

device port on rear panel• 11 Automatic measurements, including FFT• Context-sensitive help• Probe check wizard• Small footprint and lightweight

TPS2000 SERIES DIGITAL STORAGE OSCILLOSCOPES

SPECIFICATIONS AT A GLANCE

Standard accessories included with all TPS2000 series scopes are: Probes — P2220 200 MHz, 1X/10X switchablepassive probe (one per channel); battery - Lithium-ion with fuel gauge; mfg. part no. TDSPCS1 OpenChoice® PCConnectivity software; user manual; AC adapter and power cord and a NIM/NIST - traceable certificate of calibration.Also available is mfg. part no. TPS2PBND Power Bundle which includes: four mfg. part no. P5120 passivehigh-voltage probes and mfg. part no. TPS2WR1 Power Measurement and Analysis software. Order additionalaccessories and test probes separately below and on page 2162.

TPS2024

TDS2024B


2164

9




TDS3000C SERIES DIGITAL PHOSPHOR OSCILLOSCOPES (CONT.)TPS2000 SERIES DIGITAL STORAGE OSCILLOSCOPES (CONT.)

Mfg. Part No. TDS3012C TDS3014C TDS3032C TDS3034C TDS3052C TDS3054CInput Channels 2 Analog 4 Analog 2 Analog 4 Analog 2 Analog 4 AnalogCalculated Rise Time5mV/div (typical)

3.5ns 3.5ns 1.2ns 1.2ns 0.7ns 0.7ns

Maximum Record Length 10k points 10k points 10k points 10k points 10k points 10k pointsAnalog Bandwidth (-3dB) 100MHz 100MHz 300MHz 300MHz 500MHz 500MHzMaximum Sample Rate(All Channels)

1.25GS/s 1.25GS/s 2.5GS/s 2.5GS/s 5GS/s 5GS/s

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachTPSBAT Additional Battery 11J4786 247.00TPSCHG Battery Charger 11J4787 431.00343-1689-00 Versatile Hanger 11J4791 9.00

Mfg. Part No. Description Stock No. Price EachTDS3012C 100MHz, 2-Channel Digital Phosphor Oscilloscope 84M7358 4400.00TDS3014C 100MHz, 4-Channel Digital Phosphor Oscilloscope 84M7359 5200.00TDS3032C 300MHz, 2-Channel Digital Phosphor Oscilloscope 84M7360 6300.00TDS3034C 300MHz, 4-Channel Digital Phosphor Oscilloscope 84M7361 7550.00TDS3052C 500MHz, 2-Channel Digital Phosphor Oscilloscope 84M7362 9050.00TDS3054C 500MHz, 4-Channel Digital Phosphor Oscilloscope 84M7363 10800.00

APPLICATION MODULESMfg. part no. TDS3AAM Advanced Analysis Module adds extended math capability, arbitrary math expressions,measurement statistics and additional automated measurements.

Mfg. Part No. Description Stock No. Price EachTDS3AAM Advanced Analysis Module 29C7990 550.00

Mfg. part no. TDS3LIM Limit Testing Module adds custom waveform limit testing capabilities

TDS3LIM Limit Testing Module 29C7992 550.00Mfg. part no. TDS3TMT Telecom Mask Testing Module adds pass/fail compliance of ITU-T G.703 and ANSI T1.102standards, custom mask testing and more.

TDS3TMT Telecom Mask Testing Module 99B1853 1110.00Mfg. part no. TDS3VID Extended Video Analysis Module adds video quickmenu, autoset, hold, line count trigger, videopicture mode, vectorscope* mode, HDTV format trigger graticules and more.

TDS3VID Extended Video Analysis Module 48F1568 550.00Mfg. part no. TDS3SDI Serial/Digital Video Module adds 601 serial digital video to analog video conversion, videopicture, vectorscope*, and analog HDTV triggering capabilities and more.

TDS3SDI 601 Serial/Digital Video Module 06C0565 3050.00

*Vectorscope does not support composite videoACCESSORIESMfg. part no. TNGDTS01 Operator Training Kit provides extensive instructions and step-by-step lab exercises to learnabout the operation of TDS3000C series oscilloscopes. Kit includes self-paced CD-ROM based manual and signalsource board.

Mfg. Part No. Description Stock No. Price EachTNGTDS01 Operator Training Kit 35C2480 365.00SIGEXPTE National Instruments LabVIEW SignalExpress™ Tektronix Edition

Software (Full Version)84K8123 699.00

TDS3GV GPIB, VGA, RS-232 Interface Communication Module 29C7991 495.00

Mfg. Part No. Description Stock No. Price EachTDS3GV GPIB, VGA, RS-232 Communication Module 29C7991 495.00

Mfg. part no. TDS3VID application module is especially useful for professionals servicing or maintaining video systems.Extends basic video triggering by adding the following features: Video picture, Vectorscope, HDTV Triggering, VideoPicture Mode, Built-in Vectorscope Capabilities, Analog HDTV Triggering.

TDS3VID Video Autoset Application Module 48F1568 550.00Mfg. part no. TDS3AAM provides advanced analysis capability allowing the user to define waveforms as arbitrary mathexpressions, including a variety of mathematical functions plus constants and measurements. Adds area and cycle areameasurements, differentiation and integration functions, measurement averaging, and measurement statistics.Enhanced XY cursor capabilities and the FFT capabilities of mfg. part no. TDS3FFT module are also included.

TDS3AAM Waveform Analysis Application Module 29C7990 550.00Mfg. part no. TDS3LIM limit testing module offers fast, simple verification that circuits are operating within intendedparameters. Allows you to create waveform reference templates and compare any number of input channels with anycombination of four references. Set actions for TDS3000C series oscilloscope to take if a waveform strays outsidereference limits: stop acquisition, sound a beep, print a hard copy, or save the waveform to disk. Excellent for repetitivetesting applications where quick Go/No-Go decisions are required.

TDS3LIM Limit Testing Module 29C7992 550.00ACCESSORIESMfg. part no. TDS3PRT plug-in printer adds easy, portable documentation capability to the TDS3000C seriesoscilloscope. Just plug it into the back of the oscilloscope and press ″Hardcopy″ to produce a printout of the screen.Compatible with existing TDS3000C series instruments.

Mfg. Part No. Description Stock No. Price EachTDS3PRT Plug-In Printer 29C7993 699.00TDS3BATC Lithium Ion Battery Pack, 14.4V 61M2323 536.00TDS3CHG Fast Charger for Battery Pack 48F1570 145.00AC3000 Soft Carrying Case for TDS3000C series Oscilloscopes 48F1571 196.00RM3000 Rackmount Kit for TDS3000C series Oscilloscopes 48F1572 376.00

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachTDS3BATC Rechargeable Lithium Ion Battery Pack 61M2323 536.00TDS3CHG Fast Charger for TDS3BATC Battery Pack; Order Separately

Above48F1570 145.00

AC3000 Softside Transit Case 48F1571 196.00HCTEK4321 Hardside Transit Case — Requires Mfg. Part No. AC3000

Softside Case; Order Separately Above69K6768 675.00

RMD3000 Rackmount Kit 84M7357 424.00

(81057)

(109370)

(61077)

TDS3000C SERIES DIGITALPHOSPHOR OSCILLOSCOPES

TDS5000B SERIES DIGITALPHOSPHOR OSCILLOSCOPES

TDS3000C SERIESOSCILLOSCOPEACCESSORIES

TDS3000C series portable digital phosphor oscilloscopes make dealing with complex signals simple. Displays, storesand analyzes in real-time three dimensions of signal information: amplitude, time and distribution of amplitude overtime. An intensity graded color display to provide frequency information of signal amplitudes and widths, to help locateand characterize elusive waveform anomalies. Fast update rate makes it easier to capture and display infrequentwaveforms or waveform variations. Optional communication and application modules, ordered separately below,enable the instrument to be configured for specific applications or upgraded without returning it to the manufacturer.The TekProbe® interface provides power to a range of application specific accessories. All models include probes,power cord, accessory tray, protective front cover, NIST - traceable certificate of calibration and three-yearmanufacturer’s warranty. Order additional accessories and test probes separately on page 2162.

TDS3000C series accessories including application modules and a portable printer that simply plug into the TDS3000Cseries oscilloscope to customize the instrument to the user’s needs. Select from a wide range of test probes andadditional accessories ; ordered separately on page 2162.

TDS3VID


AC3000, TDS3BATC and TDS3CHG

• 350MHz, 500MHz and 1GHz bandwidth models • 4 Channels on all models • Up to 5GS/s sample rate • Up to 16M record length • 100,000wfms/s Maximum waveform capture rate • Suite of advanced triggers

• 100, 300, and 500MHz bandwidth models • 2 or 4 analog channels • Sample rates up to 5GS/s on all channels • 10 kilosample record length on all channels • 3600wfm/s continuous waveform capture rate • Suite of advanced triggers• CE compliant





TDS3PRT

Ease of Use Features:

TDS3000C APPLICATION MODULES


• Optional battery operation provides up tothree hours without line power

• USB 2.0 host port on front panel for quickand easy data storage

• 25 automatic measurements, including FFT • WaveAlert® automatic waveform anomaly

detection

Mfg. part no. TDS3GV is a communication module that provides GPIB, VGA and RS-232. That combines the function oftwo previously available modules - mfg. part nos. TDS3GM and TDS3VM - Mfg. part no. TDS3GV also includes thenew OpenChoice™ software.

• MyScope™ custom control windows enhanceproductivity

• Right-mouse-click menus for exceptionalefficiency

• OpenChoice® platform with Windows® 2000delivers built-in networking and analysis

• Small footprint/lightweight, 10.4″ in. bright display• Standard Touch-Screen on TDS5054B and

TDS5104B models • Remote viewing and control

• TekProbe® interface supports active,differential and current probes for automaticscaling and units

• Small footprint and lightweight

Additional Application Support:

Additional Application Support:

• Interoperability with Tektronix Logic Analyzers • Communication Mask Testing • Pass/Fail Limit Testing

• Advanced Analysis • Limit Testing • Telecommunications Mask Testing

TDS5104B

• Extended Video • 601 Serial Digital Video

TDS3054C



9




DPO3000 SERIES DIGITALPHOSPHOROSCILLOSCOPES

MSO2000 / DPO2000 SERIES DIGITAL PHOSPHOR OSCILLOSCOPES (CONT.)

MSO2000 / DPO2000SERIES DIGITAL PHOSPHOROSCILLOSCOPES

TDS5000B SERIES DIGITAL PHOSPHOR OSCILLOSCOPES (CONT.)

Mfg. Part No. TDS5034B TDS5054B TDS5104BInput Channels 4 Analog 4 Analog 4 AnalogCalculated Rise Time5mV/div (typical)

1.15ns 800ps 300ps

Maximum Record Length 16M points / 8M points 16M points 16M pointsAnalog Bandwidth (-3dB) 350MHz 500MHz 1GHzMaximum Sample Rate(All Channels)

5/2.5/1.25GS/s 5/2.5/1.25GS/s 5/2.5/1.25GS/s

Mfg. Part No. Description Stock No. Price EachTDS5034B 350MHz, 4-Channel Digital Phosphor Oscilloscope 92H6338 10300.00TDS5054B 500MHz, 4-Channel Digital Phosphor Oscilloscope 92H6342 13800.00TDS5104B 1GHz, 4-Channel Digital Phosphor Oscilloscope 92H6344 17700.00

ACCESSORIES

071136200 User’s Service Manual — English Only 07J0720 200.00118940200 Mini Notebook Keyboard 11B2777 67.00TDSUSBF USB Test Fixture 13J0889 1640.00067040502 Probe Calibration, Compensation and Deskew Adapter 07H6772 230.00

Mfg. Part No. DPO3012 DPO3014 DPO3032 DPO3034 DPO3052 DPO3054Input Channels 2 Analog 4 Analog 2 Analog 4 Analog 2 Analog 4 AnalogCalculated Rise Time5mV/div (typical)

3.5ns 3.5ns 1.17ns 1.17ns 700ps 700ps

Maximum Record Length 5M points 5M points 5M points 5M points 5M points 5M pointsAnalog Bandwidth* (-3dB) 100MHz 100MHz 300MHz 300MHz 500MHz 500MHzMaximum Sample Rate(All Channels)

2.5GS/s 2.5GS/s 2.5GS/s 2.5GS/s 2.5GS/s 2.5GS/s

Mfg. Part No. MSO2012 / DPO2012 MSO2014 / DPO2014 MSO2024 / DPO2024Input Channels 2 Analog +

16 Digital (MSO2012)4 Analog +

16 Digital (MSO2014)4 Analog +

16 Digital (MSO2024)Calculated Rise Time 3.5 ns 3.5 ns 2.1 nsMaximum Record Length 1 M points 1 M points 1 M pointsAnalog Bandwidth (-3dB) 100 MHz 100 MHz 200 MHzMaximum Sample Rate(All Channels)

1 GS/s 1 GS/s 1 GS/s

(148678)

Mfg. Part No. Description Stock No. Price EachDPO3012 100MHz, 2-Channel Digital Phosphor Oscilloscope 84M7349 4780.00DPO3014 100MHz, 4-Channel Digital Phosphor Oscilloscope 84M7350 5750.00DPO3032 300MHz, 2-Channel Digital Phosphor Oscilloscope 84M7351 6880.00DPO3034 300MHz, 4-Channel Digital Phosphor Oscilloscope 84M7352 8280.00

Mfg. Part No. Description Stock No. Price EachMSO2012 100MHz, 2 Analog + 16 Digital Channel Mixed-Signal Scope 09P2333 3750.00MSO2014 100MHz, 4 Analog + 16 Digital Channel Mixed-Signal Scope 09P2334 4500.00MSO2024 200MHz, 4 Analog + 16 Digital Channel Mixed-Signal Scope 09P2335 5400.00DPO2012 100MHz, 2-Channel Digital Phosphor Oscilloscope 09P2330 2700.00DPO2014 100MHz, 4-Channel Digital Phosphor Oscilloscope 09P2331 3250.00DPO2024 200MHz, 4-Channel Digital Phosphor Oscilloscope 09P2332 3900.00

DPO2000 APPLICATION MODULESMfg. part no. DPO2AUTO Automotive Serial Triggering and Analysis Module enables triggering on packet levelinformation on CAN and LIN buses, as well as analytical tools, such as digital views of the signal, bus views, packetdecoding, search tools, and packet decode tables with time stamp information.

Mfg. Part No. Description Stock No. Price EachDPO2AUTO Automotive Serial Bus 09P2326 695.00

Mfg. part no. DPO2EMBD Embedded Serial Triggering and Analysis Module enables triggering on packet levelinformation on I2C and SPI buses, as well as analytical tools, such as digital views of the signal, bus views, packetdecoding, search tools, and packet decode tables with time stamp information.

DPO2EMBD Embedded Bus Serial 09P2329 695.00Mfg. part no. DPO2COMP Computer Serial Triggering and Analysis Module Enables triggering on packet levelinformation on RS-232/422/485/UART buses, as well as analytical tools, such as digital views of the signal, bus views,packet decoding, search tools, and packet decode tables with time stamp information.

DPO2COMP Computer Serial Bus 09P2327 695.00DPO2CONN Ethernet and Video Out Connectivity Module 09P2328 395.00

ACCESSORIES

SIGEXPTE National Instruments LabVIEW SignalExpress™ TektronixEdition Software (Full Version)

84K8123 699.00

TPA-BNC TekVPI-to-TekProbe BNC Adapter 69K6774 424.00TEK-USB-488 GPIB-to-USB Adapter 69K6773 651.00P2221 Passive Probe 09P2336 107.00TEK-DPG Deskew Pulse Generator Signal Source with TekVPI Scope

Interface84M7365 742.00

ACD2000 Softside Transit Case with Front Protective Cover 09P2325 196.00HCTEK4321 Hardside Transit Case — Requires Mfg. Part No. ACD2000

Softside Case; order separately above69K6768 675.00

RMD2000 Rackmount Kit 09P2337 427.00

TDS5000B series portable digital phosphor oscilloscopes offer Tektronix exclusive MyScope® customizable oscillo-scope user interface that allows the user to build their own control windows with only the controls, features andcapabilities that they need. The user can select justl the functionality needed from all the various parts of the oscilloscopeinto one control window, effectively creating a personalized “toolbox” of oscilloscope features. All models include: one500 MHz 10x passive probe per channel, accessory pouch, front cover, mouse, Quick Start user manual, TDS5000Bseries product software CD-ROM and operating system restoration CD-ROM, GPIB programmer’s reference, optionalapplications software CD-ROM, Getting Started with OpenChoice® guidebook, performance verification procedure PDFfile, calibration certificate documenting NIST traceability, Z540-1 compliance and ISO9001 registration, and power cord.Order additional accessories and test probes separately on page 2162.

(136197)

Features and BenefitsKey Performance Specifications:


Features and BenefitsKey Performance Specifications:

• 100MHz and 200MHz bandwidth models • 2 or 4 analog channels • 16 Digital channels (MSO2000 series) • Sample rates up to 1GS/s on all channels • 1 Megasample record length on all channels • 5,000wfm/s maximum waveform capture rate • Suite of advanced triggers• CE compliant

• 100, 300, 500 MHz bandwidth models • 2 and 4 analog channels • Sample rates up to 2.5 GS/s on all channels• 5 Megasample record length on all channels • 50,000 wfm/s maximum waveform capture rate • Suite of advanced triggers• CE compliant


Serial Bus Triggering and Analysis:

Serial Triggering and Analysis:

• E-mail on event • CD-RW drive • GPIB controller

• I2C, SPI, CAN, LIN, and RS-232/422/485/UARTAutomated Decode, Trigger and Search

• I2C, SPI, RS-232/422/485/UART, I2S/LJ/RJ/TDM, CAN,LIN Automated Decode, Trigger and Search Options


DPO3000 series digital phosphor oscilloscopes deliver superior performance. All models come complete with one mfg.part no. P6139A 500MHz 10x passive probe per channel, front cover, OpenChoice™ Desktop software, NationalInstruments LABview SignalExpress Tektronix edition LE software, calibration certificate documenting traceability toNational Metrology Institute and ISO90001 quality system registration, user manual, documentation CD, power cord,accessory pouch, and three-year manufacturer’s warranty. Order application modules, probes and other accessoriesseparately below. Select from a wider range of test probes and additional accessories ; ordered separately on page2162.

• Wave Inspector® Navigation and Search provides unprecedented efficiency in waveform analysis • FilterVu™ variable low-pass filter allows for removal of unwanted signal noise while still capturing high-

frequency events • 7″ (180mm) Bright, wide-screen, TFT-LCD color display • USB 2.0 host port on front panel for quick and easy data storage • USB 2.0 device port on rear panel for direct PC control of oscilloscope using USBTMC or direct printing to

any PictBridge® compatible printer • Plug n’ Play PC connectivity and analysis software solutions • TekVPI® probe interface supports active, differential, and current probes for automatic scaling and units • Small footprint and lightweight – only 5.3″ (134mm) deep and 7 lbs. 14 ozs. (3.6 kg)


Mixed Signal Design and Analysis (MSO2000 Series):• Ability to time correlate up to 4 analog and 16 digital channels • Parallel bus trigger and analysis • Multichannel set-up and hold triggering• Next-generation digital waveform display

DPO3054

MSO2000 and DPO2000 series digital phosphor oscilloscopes (DPOs) deliver the performance and tools needed tovisualize signals and find answers quickly. DPO2000 series provide 1M points of usable record length on all channels,serial trigger and decode analysis options, a variable low-pass filter that also allows user to see signal details to theoscilloscope’s full bandwidth and all in a compact form factor. MSO2000 series adds 16 integrated digital channels,enabling user to visualize and time correlate analog and digital signals on a single instrument. All models include: oneP2221 200MHz, 1x/10x passive probe per analog channel, user manual and translated front-panel overlay, docu-mentation CD, OpenChoice® desktop software, NI LabVIEW SignalExpress™ Tektronix Edition LE software, calibrationcertificates document measurement traceability to National Metrology Institute(s) and ISO9001Quality System Regis-tration, power cord, and a three-year manufacturer’s warranty. MSO series models also include one P6316 16-channellogic probe and accessory kit with accessory bag. Order application modules, probes and other accessories separatelybelow. Select from a wider range of test probes and additional accessories ; ordered separately on page 2162.


MSO2012

• Wave Inspector® controls provide unprecedented efficiency in waveform analysis • 9″ (229mm) WVGA wide-screen color display • USB 2.0 host port on front panel for quick and easy data storage; additional USB 2.0 host ports on rear panel• Plug n’ Play PC connectivity and analysis software solutions• TekVPI® probe interface supports active, differential and current probes for automatic scaling and units • Small footprint and lightweight – only 5.4″ (137mm) deep and 9 lbs. (4 kg) Serial Bus Trigger and Decode:• Serial Triggering, Decode, and Analysis Options

for I2C, SPI, RS-232/422/485/UART, I2S/LJ/RJ/TDM, CAN, and LIN

Additional Application Support:• Power Analysis option • HDTV and Custom Video Triggering option

*Not available on 2-channel models


2166

9




MSO4000 / DSO4000 SERIES DIGITAL PHOSPHOR OSCILLOSCOPES (CONT.)DPO3000 SERIES DIGITAL PHOSPHOR OSCILLOSCOPES (CONT.)

Mfg. Part No. MSO4032 MSO4034 / DPO4034 MSO4054 / DPO4054 MSO4104 / DPO4104Input Channels 2 Analog +

16 Digital4 Analog +16 Digital (MSO4034)

4 Analog +16 Digital (MSO4054)

4 Analog +16 Digital (MSO4104)

Calculated Rise Time 5mV/div (typ.)

1ns 1ns 700ps 350ps

Maximum Record Length

10M points 10M points 10M points 10M points

Analog Bandwidth (-3dB)

350MHz 350MHz 500MHz 1GHz

Sample Rate (All Channels)

2.5GS/s 2.5GS/s 2.5GS/s 5.0GS/s

Mfg. Part No. Description Stock No. Price EachMSO4032 350MHz, 2 Analog + 16 Digital Channel Mixed-Signal Scope 30M2974 9700.00MSO4034 350MHz, 4 Analog + 16 Digital Channel Mixed-Signal Scope 30M2975 12100.00MSO4054 500MHz, 4 Analog + 16 Digital Channel Mixed-Signal Scope 30M2976 15400.00MSO4104 1GHz, 4 Analog + 16 Digital Channel Mixed-Signal Scope 30M2977 19200.00DPO4034 350MHz, 4-Channel Digital Phosphor Oscilloscope 69K6764 10200.00DPO4054 500MHz, 4-Channel Digital Phosphor Oscilloscope 69K6765 12500.00DPO4104 1GHz, 4-Channel Digital Phosphor Oscilloscope 69K6766 15300.00

Mfg. Part No. Description Stock No. Price EachDPO4AUDIO Audio Serial Triggering and Analysis Module 73P4705 1300.00

Mfg. part no. DPO4AUTO Automotive Serial Triggering and Analysis Module enables triggering on packet levelinformation on CAN and LIN buses, as well as analytical toolssuch as digital views of the signal, bus views, packetdecoding, search tools, and packet decode tables with time stamp information.

DPO4AUTO Automotive Serial Triggering and Analysis Module 69K6761 1300.00Mfg. part no. DPO4AUTOMAX Extended Automotive Serial Triggering and Analysis Module enables triggering onpacket level information on CAN, LIN and FlexRay buses, as well as analytical tools, such as digital views of the signal,bus views, packet decoding, search tools, packet decode tables with time stamp information, and eye-diagram analysissoftware.

DPO4AUTOMAX Extended Automotive Serial Triggering and Analysis Module 84M7356 4500.00Mfg. part no. DPO4EMBD Embedded Serial Triggering and Analysis Module enables triggering on packet levelinformation on I2C and SPI buses, as well as analytical tools, such as digital views of the signal, bus views, packetdecoding, search tools, and packet decode tables with time stamp information.

DPO4EMBD Embedded Serial Triggering and Analysis Module 69K6762 1300.00Mfg. part no. DPO4COMP Computer Serial Triggering and Analysis Module enables triggering on packet levelinformation on RS-232/422/485/UART buses, as well as analytical tools, such as digital views of the signal, bus views,packet decoding, search tools, and packet decode tables with time stamp information.

DPO4COMP Computer Serial Triggering and Analysis Module 31M1249 1300.00Mfg. part no. DPO4PWR Power Analysis Application Module enables quick and accurate analysis of power quality,switching loss, harmonics, safe operating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt). Mfg. part no.DPO4PWRBND Power Analysis Bundle includes mfg. part no. DPO4PWR Power Analysis Application Module,TCP0030 current probe, TPA-BNC adapter, deskew pulse generator (TEK-DPG), and deskew fixture, in a hard-sidedcarrying case.

DPO4PWR Power Analysis Application Module 73P4706 1690.00DPO4PWRBND Power Analysis Bundle 71P8734 7850.00DPO4VID HDTV and Custom (Nonstandard) Video Triggering Module 51M6792 790.00

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachSIGEXPTE National Instruments LabVIEW SignalExpress™ Tektronix

Edition Software (Full Version)84K8123 699.00

TPA-BNC TekVPI-to-TekProbe BNC Adapter 69K6774 424.00TEK-USB-488 GPIB-to-USB Adapter 69K6773 651.00TLAHRA High-Impedance Adapter with Two 196-3476-01 Lead Sets

for P6516 MSO Probe80K9432 1489.60

119682700 CompactFlash-to-USB Memory Card Reader 23K8291 24.00AMT75* 1GHz 75-Ohm Adapter 11B2373 906.00TEK-DPG Deskew Pulse Generator Signal Source with TekVPI Scope


067168600 Deskew Calibration Fixture 73P4884 387.00TAP1500 1.5GHz TekVPI Active FTI Probe 69K6771 1970.00TDP0500 500MHz TekVPI 42V High-Voltage Differential Probe 23M9705 3000.00TDP1000 1GHz TekVPI 42V High-Voltage Differential Probe 23M2862 4180.00TCP0030 120MHz TekVPI 30A AC/DC Current Probe 69K6772 2960.00P6247 * 1GHz Differential Probe 90B2295 3990.00P6246 * 400MHz Differential Probe 50B7808 2820.00P5205 * 1.3kV, 100MHz High-Voltage Differential Probe 83F2205 1180.00P5210 * 5.6kV, 50MHz High-Voltage Differential Probe 83F2206 2370.00P5100 2.5kV, 250MHz, 100X High-Voltage Passive Probe 01F2422 402.00ADA400A * 100X, 10X, 1X, 0.1X High-Gain Differential Amplifier 83F2202 1560.00

Mfg. Part No. Description Stock No. Price EachDPO3052 500MHz, 2-Channel Digital Phosphor Oscilloscope 84M7353 9950.00DPO3054 500MHz, 4-Channel Digital Phosphor Oscilloscope 84M7354 11400.00

Mfg. Part No. Description Stock No. Price EachDPO3AUDIO Audio Serial Triggering and Analysis Module 73P4703 990.00

Mfg. part no. DPO3AUTO Automotive Serial Triggering and Analysis Module enables triggering on packet levelinformation on CAN and LIN buses, as well as analytical tools, such as digital views of the signal, bus views, packetdecoding, search tools and packet decode tables with time stamp information.

DPO3AUTO Automotive Serial Triggering and Analysis Module 84M7345 990.00Mfg. part no. DPO3EMBD Embedded Serial Triggering and Analysis Module enables triggering on packet levelinformation on I2C and SPI buses, as well as analytical tools, such as digital views of the signal, bus views, packetdecoding, search tools and packet decode tables with time stamp information.

DPO3EMBD Embedded Serial Triggering and Analysis Module 84M7347 990.00Mfg. part no. DPO3COMP Computer Serial Triggering and Analysis Module enables triggering on packet levelinformation on RS-232/422/485/UART buses, as well as analytical tools, such as digital views of the signal, bus views,packet decoding, search tools, and packet decode tables with time stamp information.

DPO3COMP Computer Serial Triggering and Analysis Module 84M7346 990.00Mfg. part no. DPO3PWR Power Analysis Application Module enables quick and accurate analysis of power quality,switching loss, harmonics, safe operating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt).

DPO3PWR Power Analysis Module 57P6427 1290.00DPO3PWRBND Power Analysis Bundle 73P4704 7540.00DPO3VID HDTV and Custom (Nonstandard) Video Triggering Module 84M7348 625.00

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachSIGEXPTE National Instruments LabVIEW SignalExpress™ Tektronix

Edition Software (Full Version)84K8123 699.00

TPA-BNC TekVPI-to-TekProbe BNC Adapter 69K6774 424.00TEK-USB-488 GPIB-to-USB Adapter 69K6773 651.00TDP0500 500MHz TekVPI 42V High-Voltage Differential Probe 23M9705 3000.00TDP1000 1GHz TekVPI 42V High-Voltage Differential Probe 23M2862 4180.00TEK-DPG Deskew Pulse Generator Signal Source with TekVPI Scope


067168600 Deskew Calibration Fixture 73P4884 387.00ACD4000 Softside Transit Case 84M7343 194.00HCTEK4321 Hardside Transit Case — Requires Mfg. Part No. ACD4000


RMD3000 Rackmount Kit 84M7357 424.00(109383)

MSO4000 / DSO4000 SERIESDIGITAL PHOSPHOROSCILLOSCOPES

• 350MHz, 500MHz, 1GHz bandwidth models • 2 and 4 analog channels • 16 digital channels (MSO4000 series) • Sample rates up to 5GS/s on all channels • 10 Megasample record length on all channels • 50,000wfm/s maximum waveform capture rate • Suite of advanced triggers• CE compliant

MSO4000 series mixed-signal and DPO4000 series digital phosphor oscilloscopes deliver superior performance in alightweight, portable package. All models come complete with one mfg. part no. P6139A 500MHz 10x passive probeper analog channel, front cover,CompactFlash memory card, OpenChoice™ Desktop software, National InstrumentsSignalExpress TE software (basic edition), calibration certificate documenting traceability to National Metrology Instituteand ISO9001 registration, user manual, documentation CD, accessory bag, power cord and three-year manufacturer’swarranty. MSO4000 series models also include one mfg. part no. P6516 16-channel logic probe with accessory kit.Order application modules, probes and other accessories separately below. Select from a wider range of test probes andadditional accessories ; ordered separately on page 2162.


MSO4000 / DPO4000 APPLICATION MODULESMfg. part no. DPO4AUDIO Audio Serial Triggering and Analysis Module enables triggering on packet level informationon I2S, LJ, RJ, and TDM audio buses, as well as analytical tools, such as digital views of the signal, bus views, packetdecoding, search tools, and packet decode tables with time stamp information.

MSO4104

DPO3000 APPLICATION MODULES



Mfg. part no. DPO3AUDIO Audio Serial Triggering and Analysis Module enables triggering on packet level informationon I2S, LJ, RJ, and TDM audio buses, as well as analytical tools, such as digital views of the signal, bus views, packetdecoding, search tools, and packet decode tables with time stamp information. NOTE: not available on 2-channelmodels.

Serial Triggering and Analysis:• I2C, SPI, RS-232/422/485/UART, I2S/LJ/RJ/

TDM, CAN, LIN, and FlexRay AutomatedDecode, Trigger and Search Options

Ease of Use Features:• Wave Inspector® Controls provide unprecedented efficiency in waveform analysis • 10.4″ (264mm) XGA color display • Built-in Ethernet port • USB 2.0 host and CompactFlash ports on front panel for quick and easy data storage• Two additional USB 2.0 host ports on rear panel• Plug n’ Play PC connectivity and analysis software solutions • TekVPI® probe interface supports active, differential, and current probes for automatic scaling and units • Small footprint and lightweight – only 5.4″ (137mm) deep and 11 lbs. (5 kg)

Additional Application Support:• Power Analysis Option • HDTV and Custom Video Triggering Option

Mixed Signal Design and Analysis (MSO4000):• Ability to time correlate up to 4 analog and 16 digital channels• Parallel bus trigger and analysis • MagniVu™ 60.6ps technology provides finer timing resolution • Per-channel threshold settings • Multichannel set-up and hold triggering • Next-generation digital waveform display



9




MSO4000 / DSO4000 SERIES DIGITAL PHOSPHOR OSCILLOSCOPES (CONT.)

(148858)

Mfg. Part No. Description Stock No. Price Each012161401 iView TLA Software and Cable 61H3361 1800.00

Mfg. Part No. Description Stock No. Price EachA621 Industrial-Style Clamp-On Current Probe 01F2438 541.00A622 Long-Nose Style Clamp-On AC/DC Current Probe 01F2474 541.00

(78936)

Mfg. Part No. Description Stock No. Price EachTCP202 DC-Coupled Current Probe 85F021 1880.00

Mfg. Part No. Description Stock No. Price EachP5100 High-Voltage Passive Probe 01F2422 402.00

Mfg. Part No. Description Stock No. Price EachP6021 AC Current Probe 83F2211 1340.00

Mfg. Part No. Description Stock No. Price EachTCPA300 Wide-Range Current Amplifier 20H0193 1990.00TCPA400 High-Range Current Amplifier 54H4607 1990.00TCP404XL DC-2MHz, 500A, Current Probe 54H4815 3220.00TCP312 DC-100MHz, 30A, Current Probe 20H0225 1460.00TCP305 DC-50MHz, 50A, Current Probe 54H3787 1240.00TCP303 DC-15MHz, 150A, Current Probe 29H2811 2370.00

(33690)

(33692)

(78945)

iView™ INTEGRATED VIEW

(33698)

(33697)

• TDS1000 Series • TDS2000 Series • TDS3000/3000B Series • TDS5000B DPO Series • TDS6000 Series • TDS7000B DPO Series • TDS724D, TDS754C, TDS754D,

TDS784C, TDS784D, TDS794D • TDS684C, TDS694C Series• DPO4000 Series• DPO3000 Series

AC/DC CURRENTMEASUREMENT SYSTEMS

CURRENT PROBES

DC-COUPLEDCURRENT PROBE

AC CURRENT PROBE

HIGH-VOLTAGE PASSIVE PROBE

A600 series current probes are specifically designed for current measurements with TDS series, DPO/MSO seriesoscilloscopes. Mfg. part no. A621 industrial-style clamp-on can measure AC currents from 100mA to 2000A peak overa frequency range of 5Hz to 50kHz. Unit provides 1mV, 10mV or 100mV output for each Amp measured. Mfg. part no.A622 is a long-nose style clamp-on for AC/DC current measurements from 50mA to 100A peak over a frequency rangeof DC to 100kHz. Unit provides 10mV or 100mV output for each Amp measured.

Mfg. part no. P5100 is a low-input capacitance High Voltage (2.5 kV)Probe designed for higher frequency applications. The probe can becompensated to match plug-ins and oscilloscopes with nominal inputcapacitances of 7-30pF. A variety of screw-on accessories provideeasy connection to the device under test.

When combined with a TDS series oscilloscope, mfg. part no. TCP202 enables users to make direct readout DC and ACcurrent measurements. Split core construction for easy circuit connection. DC to 50MHz bandwidth. 15 amps DC + peakAC current. 50 amps peak pulse current. Cable length: 7.2′ (2.2m).

Mfg. part no. P6021 provides wide-band performance with all TDS series and DPO/MSO series oscilloscopes,available below. Excellent low-frequency characteristics. Bandwidth: 120Hz to 60MHz, 15A peak, for 1MΩ inputs.Shielded probe head, AC only. Split core. For any Tektronix Probes/Accessories see Quick Reference Chart, on page

• AC / DC measurement capabilities • Automatic scaling and units*2 – oscilloscope on-screen readout of magnitude and units reduces

measurement errors with no more hand calculations• DC - 100MHZ, current probe amplifier (Type TCPA300 ) uses:

- DC - 100MHz, 30 A DC (Type TCP312)- DC - 50MHz, 50 A DC (Type TCP305)- DC -15MHz, 150 A DC (TypeTCP303)

• DC - 50MHZ, current probe amplifier (type TCPA400) uses:- DC - 2MHz, 750*1 A DC (Type TCP404XL) (500 A DC continuous)

iView™ supportedoscilloscopes include:

A621

The iView™ package, available for every TLA5000 series logic analyzer, includes TLA application software and aninterconnect cable to integrate the logic analyzer with more than 40 Tektronix oscilloscopes. Recommendedoscilloscopes include MSO4000 series, DPO4000 series, DPO3000 series, TDS5000B series, and TDS3000C series

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachTCPA300 * Wide-Range Current Amplifier 20H0193 1990.00TCPA400 * High-Range Current Amplifier 54H4607 1990.00AC4000 Softside Transit Case 69K6760 201.00ACD4000 Softside Transit Case 84M7343 194.00HCTEK4321 Hardside Transit Case — Requires Mfg. Part No. ACD4000


RM4000 Rackmount Kit 69K6770 721.00

Mfg. part no. TCPA300 amplifier, when used with mfg. part no. TCP312, mfg. part no. TCP305, or mfg. part no.TCP303 probes, provides a wide range of current measurement capability and spans the gap between low levelmilliamp measurements and very high current levels. The three probes provide current measurement capabilities of30A, 50A, and 150A DC continuous. For even higher current levels, mfg. part no. TCPA400 amplifier with mfg. part no.TCP404XL current probe measures 500A DC continuous and 750A DC continuous, derated with duty cycle.

TCPA300

(90361)

The iView™ seamlessly integrates and automatically time-correlates data from the logic analyzer and oscilloscope, soyou can transfer analog waveforms from the oscilloscope to the logic analyzer display with the click of a mouse. Viewtime-correlated analog and digital signals side-by-side and pinpoint the source of elusive glitches and other problems inmoments.

All TCPA300 / TCPA400 current probe amplifiers include: AC/DC current probe amplifier, instruction/service manual,TEKPROBE interface cable, male to male BNC cable (50 Ω), 50 Ω feed-through termination, certificate of traceablecalibration.

*Requires one mfg. part no. TPA-BNC TekVPI-to-TekProbe BNC adapter; order separately above.


2168

9




1000 SERIES PORTABLE DIGITAL STORAGE OSCILLOSCOPES (DSO) (CONT.)

1000 SERIES PORTABLE DIGITALSTORAGE OSCILLOSCOPES (DSO)

Mfg. Part No. Description Stock No. Price EachADA400A Differential Preamplifier 83F2202 1560.00P6101B 1X, 15MHz Passive Probe

(Two Recommended)83F2213 150.00

1103 TekProbe Power Supply 83F2208 1910.00

Mfg. Part No. Description Stock No. Price EachP5210 High-Voltage Differential Probe 83F2206 2370.00

Mfg. Part No. Description Stock No. Price EachTNGTDS01 Operator Training Kit 35C2480 365.00

(33696)

Mfg. Part No. BandwidthSample

RateScope

Channels Stock No.PriceEach

DSO1002A 60 MHz 2 GSa/s 2 Analog 71P8329 1202.00DSO1004A 60 MHz 2 GSa/s 4 Analog 71P8330 1733.00DSO1012A 100 MHz 2 GSa/s 2 Analog 71P8331 1503.00DSO1014A 100 MHz 2 GSa/s 4 Analog 71P8332 2084.00DSO1022A 200 MHz 2 GSa/s 2 Analog 71P8333 1884.00DSO1024A 200 MHz 2 GSa/s 4 Analog 71P8334 2415.00

(33691)

DIFFERENTIAL PREAMPLIFIER

(73601)

Mfg. Part No. Description Stock No. Price EachU2761A USB Modular Function Generator, 20 MHz 05N1306 1686.00

Mfg. Part No. Description Stock No. Price EachU2701A USB Modular Oscilloscope, 100 MHz 05N1302 1358.00U2702A USB Modular Oscilloscope, 200 MHz 05N1303 1674.00

ACCESSORIESU2921A-100 BNC Cable 08P3579 20.84U2921A-101 USB Secure Cable, 2m 08P3580 20.8410070C 1:1, 20MHz Passive Probe 02C6715 178.00N2862A 10:1, 150 MHz Passive Probe for U2701A only 57K6633 105.00N2863A 10:1, 300 MHz Passive Probe for U2702A only 53K6457 145.00

Mfg. part no. ADA400A provides low-level single-acquisition capa-bility to DSOs. 10uV/div sensitivity. Low-pass filter for 100Hz, 3kHz,100kHz, and full (1MHz). Selectable gain: 100, 10, 1 or 0:1. Accuratelymeasures signals as small as 5uV. Mfg. part no. ADA400A is powereddirectly from TDS3000C, TDS5000B, TDS600, TDS7000, DPO3000,DPO4000,, MSO4000, TDS7000 (TEKPROBE), and TDS7000 (Tek-Connect) w/TCA-1Meg series oscilloscopes. It may also be poweredby a 1103 probe power supply.

Mfg. Part No. Description Stock No. Price EachN2738A Softside Carrying Case, Zipper Closure, Black 71P8336 95.19N2739A Rack Mount Kit 71P8337 314.00N2740A Education Training Kit 71P8338 351.00N2862A 10:1, 150 MHz Passive Probe 57K6633 105.00N2863A 10:1, 300 MHz Passive Probe 53K6457 145.00

(134275)

OPERATORTRAINING KIT

HIGH-VOLTAGE DIFFERENTIAL PROBE

The Operator Training Kit provides education about the features, uses and basic operation of an oscilloscope through itsextensive instructions and step-by-step lab exercises. The kit includes a self-paced, CD-ROM-based manual and signalsource board. The kit is designed specifically for the Tektronix TDS1000, TDS2000, and TDS3000C series.

(147427)Mfg. part no. P5210 makes floating measurements with the scopegrounded, resulting in safer, more accurate measurements for higherproductivity. Maximum differential input voltage: 5600V (DC + peak AC)4400V rms. 50MHz bandwidth. It can be used with Tektronix TEK-PROBE™ interface oscilloscopes directly or with any oscilloscope withthe use of the 1103 TEKPROBE™ power supply. See Tektronix Probes/Accessories Quick Reference Chart, on page 2162.

USB MODULARFUNCTION GENERATORS

(134266)

Training Kit Includes:

USB MODULAROSCILLOSCOPES

• 20 MHz sine and square waveforms• Ramp, triangle and DC waveforms• Pulse generation edge• Arbitrary waveform (14-bit, 64K points

50MS/s)• 14-bit, 50 MSa/s, 64 Kpoint arbitrary

waveforms• AM, FM, PM, ASK, FSK, PSK modulation types• High-speed USB 2.0 (480Mbits/s) TMC 488.2

compliant• Standalone or modular capabilities; Requires

U2781A for modular capability

DSO1024A

• User Manual (PDF)• Signal Source Board with

Documentation• Battery• EMI Filter with Instructions for Wall

Power Use• Static Susceptibility Documentation

The U2761A signal generator offers 10 standard waveforms plus pulse and arbitrary waveforms generation capabilities.It uses the common non-proprietary standard high-speed USB 2.0 interface that provides ease of connectivity - allowingusers to set up and configure their test swiftly with the plug and play feature. It comes bundled with the AgilentMeasurement Manager for quick setup to perform measurement. Users are able to customize waveform by drawing inthe arbitrary waveform editor.

• 20 kpts memory depth — see more of thesignal, more of the time

• Big 5.7″ diagonal color LCD for brighter,crisper waveform display

• Wider viewing angle — user can see displayeven when not directly in front of unit

• True zoom mode — simultaneous viewingof main and zoomed waveform

• Optionally switch off the menu display for25% more viewing area

• Bandwidths of 100 MHz and 200 MHz• Up to 1 GSa/s maximum sample rate• 32 Mpts of waveform memory• Advanced triggering, including edge, pulse width, and TV• Compatibility with Hi-Speed USB 2.0, USBTMC 488.2 standards• Four math functions, including FFTs standard• Standalone and modular capability; Requires U2781A for modular capability

The U2701A and U2702A modular oscilloscopes combine a set of essential features that are ideal for analyzing designsin an affordable way. These devices are uniquely designed to accommodate your needs for flexibility with the dual-playfunction. The U2701A and U2702 give you the debugging power you need.

1000 series digital storage oscilloscopes (DSO) deliver the performance and features found in bigger scopes and theportability and economical price required in smaller scopes. Select from 60 MHz, 100 MHZ and 200 MHZ models, withtwo or four analog channels. These powerful yet lightweight scopes are engineered to provide more signal viewing,

more capabilities and more productivity. All models come complete with power cord, 10:1 passive probe for eachchannel (2 or 4), user’s/service guide, CD-ROM with additional documentation, and three-year manufacturer’swarranty. Dimensions: 12.78 W x 6.21 H x 5.08″ D″. Weight: 6.68 lbs. Order accessories separately below.

Features:

ACCESSORIES

U2702A

Mfg. part no. N2740A education training kit for 1000 series scopes includes training board, USB cable and manual.Mfg. part no. N2862A probe comes standard with 60 MHz and 100 MHz 1000 series scope models and mfg. part no.N2863A probe comes standard with 200 MHz scope models. Order additional probes separately below.

U2701A

More Signal Viewing...

More Capabilities...• Bandwidths up to 200 MHz• Two or four analog channels• 2 GSa/s max. real-time sample rate, 1 GSa/s each channel• 23 automatic voltage, time and frequency measurements for quick access to powerful functions• Sequence mode allows easy debug with waveform recording, playback and storage• Selectable band pass filtering eliminates unwanted signals• Advanced triggering for capturing and viewing elusive signals• Trigger modes: edge, video, pulse width, pattern, alternate channel

More Productivity...• Go/no-go mask testing automatically detects waveforms that deviate from set standards• Waveform math and FFT functions give information instantly• Built-in help system and graphical user interface• Autoscale puts the signal on screen fast with the touch of a button• User-friendly menu and easy-to-operate front-panel controls• Built-in USB host and device ports, plus IntuiLink software support PC connectivity• Store setups and waveforms in internal memory or on an external USB flash drive• Sturdy snap handle for easy carrying helps get the scope where it’s needed



9




DSO5054A

(148859)

Mfg. Part No. Bandwidth ChannelsMax.

Sample Rate Stock No. Price EachDSO6012A 100 MHz 2 Scope 2 GSPS 57K6333 5202.00DSO6014A 100 MHz 4 Scope 2 GSPS 57K6334 6335.00DSO6032A 300 MHz 2 Scope 2 GSPS 97J9955 7823.00DSO6034A 300 MHz 4 Scope 2 GSPS 97J9956 9972.00DSO6052A 500 MHz 2 Scope 4 GSPS 97J9957 10144.00DSO6054A 500 MHz 4 Scope 4 GSPS 97J9958 12474.00DSO6102A 1 GHz 2 Scope 4 GSPS 97J9959 13029.00DSO6104A 1 GHz 4 Scope 4 GSPS 97J9960 15452.00

MSO MODELS

MSO6012A 100 MHz 2 Scope + 16 Logic 2 GSPS 57K6335 7126.00MSO6014A 100 MHz 4 Scope + 16 Logic 2 GSPS 57K6336 8208.00MSO6032A 300 MHz 2 Scope + 16 Logic 2 GSPS 97J9961 9860.00MSO6034A 300 MHz 4 Scope + 16 Logic 2 GSPS 97J9962 12262.00

Mfg. Part No. Description Stock No. Price EachDSO5012A 100MHz, 2GSa/s 2-Channel Portable Oscilloscope 31M8102 4413.00DSO5014A 100MHz, 2GSa/s 4-Channel Portable Oscilloscope 31M8103 5183.00DSO5032A 300MHz, 2GSa/s 2-Channel Portable Oscilloscope 31M8104 6189.00DSO5034A 300MHz, 2GSa/s 4-Channel Portable Oscilloscope 31M8105 7590.00DSO5052A 500MHz, 4GSa/s 2-Channel Portable Oscilloscope 31M8106 9108.00DSO5054A 500MHz, 4GSa/s 4-Channel Portable Oscilloscope 31M8107 10816.00

ACCESSORIES

10070C 1:1, 20MHz Passive Probe 02C6715 178.00N2863A 10:1, 300 MHz Passive Probe for U2702A only 53K6457 145.0010073C 10:1, 500MHz Passive Probe 31C8202 327.00N2782A 50MHZ Current Probe, AC/DC 75M5841 2476.001147A 50MHz Current Probe, AC/DC, with AutoProbe Interface 95H8239 2051.001146A 100kHz Current Probe, AC/DC 50B3511 729.0010076A 100:1, 4kV, 250MHz High-Voltage Probe 24C1730 368.00N2771A 1000:1, 15kV, 50MHz High-Voltage Probe 13C3642 1350.00N2772A 20MHz Differential Probe 25C4376 797.001141A 200MHz Differential Probe 92F023 2747.001130A 1.5GHz InfiniiMax Differential Probe with AutoProbe Interface 11J6643 2959.00N2917B Hardside Transit Case 64M0546 1075.00

Mfg. Part No. Description Stock No. Price EachDSO3062A 60MHz 2-Channel Digital Storage Oscilloscope 23K8442 1380.00DSO3102A 100MHz 2-Channel Digital Storage Oscilloscope 23K8443 1654.00DSO3152A 150MHz 2-Channel Digital Storage Oscilloscope 23K8444 1818.00DSO3202A 200MHz 2-Channel Digital Storage Oscilloscope 23K8445 2039.00

(84207)

Mfg. Part No. Description Stock No. Price EachU2741A USB Modular Digital Multimeter 08P3578 1054.00

Mfg. Part No. Description Stock No. Price EachU2781A USB Modular Instrument Chassis 42M3708 1212.00U2701A USB Modular Oscilloscope, 100 MHz 05N1302 1358.00U2702A USB Modular Oscilloscope, 200 MHz 05N1303 1674.00U2761A USB Modular Function Generator, 20 MHz 05N1306 1686.00U2722A USB Modular Source Measuring Unit 05N1304 2213.00U2751A USB Modular Switch Matrix 05N1305 957.00U2741A USB Modular Digital Multimeter 08P3578 1054.00

(90375)

3000 SERIES 2-CHANNEL DIGITALSTORAGE OSCILLOSCOPES

(134276)

InfiniiVision DSO5000 SERIESPORTABLE DIGITAL STORAGEOSCILLOSCOPES

(134277)

USB MODULARINSTRUMENT CHASSIS

InfiniiVision 6000 SERIESOSCILLOSCOPES

• Color display with large waveform area• 1GSa/s sample rate• 4Kpts display memory depth• Easy to use; color-coded knobs• Setup and waveform memory• 20 Automatic measurements• 5 Math functions including FFTs• Dual-time base display• Digital filtering• Pass/Fail testing• Segmented memory: Record mode• Edge, pulse, video triggering

• MegaZoom III technology — always fast, always on• High-definition color LCD display with 256 intensity levels• Fast update rate to 100,000 waveforms per second• Responsive deep memory: 8 Mpts• New serial triggering, including I2C, SPI, CAN, LIN, and

RS-232/UART on 4-channel models• Display mode: Main, Delayed, XY and Roll with Autoscale • Triggering: Edge, Pulse Width, Pattern, TV, Duration, Sequence• Easy-to-operate front-panel controls• AutoProbe interface to identify and power probes• 50Ω and 1MΩ probe inputs• Complete connectivity — 2 USB host, 1 USB device, 10/

10Mbit LAN, GPIB and XGA out

Features:

InfiniiVision DSO5000 series highly portable digital storage oscilloscopes are capable of handling today’s designchallenges. Powered by MegaZoom III technology that delivers a responsive deep memory, high-definition displaysystem and a superior ability to capture transient signals. It’s the perfect take-along tool for engineers and technicianswho want to increase their level of productivity and catch design bugs and problems before they get to their customers.Dimensions: 15.15 W x 7.40 H x 6.86″ D″ (with convenient carrying handle), weight: 9.02 lbs. Mfg. part nos.DSO501xA and DSO503xA include one 10:1, 300MHz passive probe and mfg. part nos. DSO505xA include one 10:1,500MHz passive probe. All models come complete with user’s manual and 3-year manufacturer’s warranty. Orderadditional accessories separately below.

Features:

InfiniiVision 6000 series scopes help you see more signal detail in your designs. The instruments are ideal for verifyingand debugging designs that utilize embedded 8- or 16-bit microcontrollers, DSPs, FPGAs, ADCs, DACs, andtransducers. Standard 8Mpts of Agilent’s third generation MegaZoom III deep memory captures long, non-repeatingsignals and maintains high sample rates, allowing you to quickly zoom in on areas of interest. The high-definition (1024 x768) color display system has a real-time update rate of up to 100,000 waveforms/sec and 256 intensity levels. Thestandard interfaces (high-speed USB2.0 device, 10/100 Base-T LAN (Ethernet), and GPIB) allow waveform data orimages to be saved to a PC. Waveforms can be printed on a connected printer or saved to a connected USB storagedevice. Flexible triggering enables easy isolation and analysis of complex signals and fault conditions common in mixedanalog and digital designs. All models include a user’s guide, service guide, programmers guide, one 10:1 passive probeper scope channel, Agilent IO libraries software suite 14.0, a front panel cover, a power cord, and a 3-yearmanufacturer’s warranty. MSO models also include a 16: 2 x 8 logic probe and a logic cable tray.

• Measures up to 300Vdc with 5.5 digits resolution • Make fast measurements with up to 100 readings/s• Frequency and temperature measurement capability• Utilize wide measurement ranges: 100 mVdc to 300

Vdc and 10 mA to 2 A• Standalone and modular capabilities; Requires

U2781A for modular capability

3000 series scopes provide outstanding performance and a high-resolution color display at a very affordable price.Perfect for engineers, technicians, operators and students who require a quality view into their circuits and end products.Includes test probes and instruction manual.

• MSO Models Include Built In 16 Channel Logic Analyzer• Standard 8 Mpts MegaZoom III deep memory • Revolutionary ultra-responsive, high-definition XGA color

display • Full-scale connectivity – Standard USB, LAN, GPIB and

XGA video output • Powerful triggering includes I2C, CAN, LIN, USB, RS-232/

UART, Flexray, SPI and video, and analog HDTV/EDTV.• AutoProbe interface • Built-in help system• Flexibility to upgrade a DSO to an MSO model

• Six USB module slots• High-speed USB 2.0 (480 Mbit/s)• Hot-swappable and auto-detectable characteristic

minimizes startup time/effort• Allows expansion up to 384 channels• Simultaneous synchronization between modules• SSI/Star trigger bus synchronization between external

trigger source and modules• Dimensions: 250 mm (W) x 177 mm (H) x 271 mm (D)

The U2741A is a small form factor multimeter with huge capabilities. It provides a broad range of measurementfunctions, including temperature and frequency. The U2741A is a 5.5 digit resolution digital multimeter that is able tocapture up to 100 readings/sec. It uses the common non-proprietary standard high-speed USB 2.0 interface thatprovides ease of connectivity - allowing users to set up and configure their tests swiftly with its plug and play feature.

DSO3202A

USB MODULAR DIGITALMULTIMETERS

The U2781A USB modular instrument chassis is AC powered and compact. It has an external 10 MHz reference clock,external trigger in and trigger out functions. The U2781A is ideal for R&D, design validation and manufacturing engineersfor data logging, measurement, and monitoring over a broad range of industries.

DSO MODELS


2170

9




INFINIIVISION 7000 SERIES DIGITAL STORAGE (DSO) AND MIXED-SIGNAL (MSO) OSCILLOSCOPES (CONT.)

InfiniiVision 6000 SERIES OSCILLOSCOPES (CONT.)

MSO MODELS

Mfg. Part No. Bandwidth ChannelsMax.

Sample Rate Stock No. Price EachMSO6052A 500 MHz 2 Scope + 16 Logic 4 GSPS 97J9963 14450.00MSO6054A 500 MHz 4 Scope + 16 Logic 4 GSPS 97J9964 15682.00MSO6102A 1 GHz 2 Scope + 16 Logic 4 GSPS 97J9965 16899.00MSO6104A 1 GHz 4 Scope + 16 Logic 4 GSPS 97J9966 19486.00

Mfg. Part No. BandwidthSample

RateScope

Channels Stock No.PriceEach

DSO7012A 100 MHz 2 GSa/s 2 73P4606 5005.00DSO7014A 100 MHz 2 GSa/s 4 73P4607 6060.00DSO7032A 350 MHz 2 GSa/s 2 76M7894 7531.00DSO7034A 350 MHz 2 GSa/s 4 76M7895 9599.00DSO7052A 500 MHz 4 GSa/s 2 76M7896 9856.00DSO7054A 500 MHz 4 GSa/s 4 76M7897 12236.00DSO7104A 1 GHz 4 GSa/s 4 76M7898 15015.00

MIXED-SIGNAL OSCILLOSCOPES (MSO)

MSO7012A 100 MHz 2 GSa/s 2 73P4615 7088.00MSO7014A 100 MHz 2 GSa/s 4 73P4616 8118.00MSO7032A 350 MHz 2 GSa/s 2 76M7899 9492.00MSO7034A 350 MHz 2 GSa/s 4 76M7900 11915.00MSO7052A 500 MHz 4 GSa/s 2 76M7901 14042.00MSO7054A 500 MHz 4 GSa/s 4 76M7902 15384.00MSO7104A 1 GHz 4 GSa/s 4 76M7904 18935.00

Mfg.Part No. Description Stock No.

PriceEach

N2914A MSO Upgrade for 6000 Series 300MHz Scopes 19K6049 2222.00N2915A MSO Upgrade for 6000 Series 500MHz and 1GHz Scopes 19K6050 3558.00

APPLICATIONS

Mfg. Part No. Description Stock No. Price EachU1881A Power Measurements and Analysis Software 89M6502 1503.00N5454A Segmented Memory — For All DSO/MSO Models 89M6495 1303.00

(83780)

Mfg. Part No. Description Stock No. Price EachN2735A OPTION 002 2-Channel, 350 MHz DSO-to-MSO Upgrade Kit 76M7908 2136.00N2735A OPTION 004 4-Channel, 350 MHz DSO-to-MSO Upgrade Kit 76M7909 2580.00N2736A OPTION 002 2-Channel, 500 MHz DSO-to-MSO Upgrade Kit 76M7910 4167.00N2736A OPTION 004 4-Channel, 500 MHz DSO-to-MSO Upgrade Kit 76M7911 3595.00N2737A 4-Channel, 1 GHz DSO-to-MSO Upgrade Kit 76M7912 4116.00N5427A SEC Secure Environment Mode Factory-Installed

Option — For All DSO/MSO Models10P1666 531.00

N2733A Soft Carrying Case 76M7907 173.00N2732A Rack Mount Kit 76M7906 531.00

APPLICATIONS

N5424A CAN/LIN Automotive Triggering and Decode — ForDSO and MSO 4-Channel Models Only

96K3157 1303.00

N5423A 12C/SPI Serial Decode — For DSO and MSO4-Channel Models Only

87K0298 1303.00

N5432A FlexRay Automotive Triggering and Decode — ForMSO 4-Channel Models Only

05N1672 3190.00

N5457A RS-232/UART Triggering and Decode — For DSO andMSO 4-Channel Models Only

76M7918 1303.00

N5406A MSO FPGA Dynamic Probe Application for Xilinx 64K0300 1538.00N5434A MSO FPGA Dynamic Probe Application for Altera 45M6086 1600.00B4610A Offline Viewing and Analysis of Data on PC — For All

DSO and MSO Models73P4599 500.00

(105929)

SPECS ANALOG OSCILLOSCOPESMfg. Part No. 2190B 2160A 1541D 2125A 2120B

Stock No. 90F7712 89F1094 94B2971 87F3297 46F8595Channels 2 2 2 2 2

Bandwidth@ x 5 MAG

100MHz20MHz

60MHz10MHz

40MHz7MHz

30MHz10MHz

30MHz10MHz

Rise Time 3.5ns 5.8ns 8.8ns 12ns 12nsSensitivity 5mV/div to 5V/div (1mV/div to 1V/div @ X5 MAG)

Vert Accuracy ±3% (±5% @ X5 MAG)Input Resis. 1MΩ ±2%Input Capac. 22pF ± 3pF 25pF ± 10pF 25pF ± 10pF 25pF ± 10pF 25pF ± 10pFSignal Delay Yes … … … …Y Axis Output Yes Yes Yes Yes …

DelayedSweep

Yes Yes … Yes …

Trigger Auto-Normal; CH1, CH2, ALT, EXT, LINE; AC, TVH, TVVTrig Int 1.5div 1.5div 1.5div 1.5div 1.5div

Sensitivity Ext 600mV 100mV 1V 100mV 100mVX-Y Mode Yes Yes Yes Yes Yes

Z Axis Input Yes Yes … Yes …Sampling … ... … ... …Memory … ... … ... …Cursors/Readouts

… ... … ... …

RS232 Interface … ... … ... …Other

Features… Component

Tester… Component

Tester…

Power 120/220/240VAC ± 10%, 50/60Hz

SPECS DIGITAL OSCILLOSCOPESMfg. Part No. 2530 2532 2534 2540 2542

Stock No. 60M9896 01P0073 15N0036 04P2070 04P2071Channels 2

Bandwidth 25MHz 40 MHz 60 MHz 60 MHz 100 MHzRise Time <14ns <8.8ns <5.83ns <5.83ns <3.50nsSensitivity 2mV/div to 5V/div

DC Gain Accuracy ±3.0%Input Resis. 1MΩ in parallel with 13pf 1 MΩ in parallel with 19pfSampling 250MSa/s 500MSa/s 400MSa/s 1 GSa/sMemory 4000 point record length

I/O Interface USB port (req. incl. EasyScope software) USB port (req. incl. Comsoft Software)Other Features Cursors with readouts

Power 120-240VAC, 50VA max., 45-440Hz 100-240VAC, 50VA max, 47-440 Hz

INFINIIVISION 7000 SERIES DIGITAL STORAGE (DSO) AND MIXED-SIGNAL (MSO) OSCILLOSCOPES

DSO7034A

Mfg. Part No. Description Stock No.Price Each

1-22190B 100 MHz Analog 90F7712 1774.892160A 60 MHz Analog 89F1094 1230.881541D 40 MHz Analog, Dual Channel 94B2971 894.882125A 30 MHz Analog 87F3297 723.522120B 30 MHz Analog, Dual or Single Trace 46F8595 581.94

MSO UPGRADES

• Engineered for the best signal visibility• Bandwidths up to 1 GHz• 8 Mpts memory depth• Fast update rate to 100,000 waveforms per second• High-definition, big 12.1″ color LCD display• MegaZoom III technology — always fast, always on• Display mode: Main, Delayed, XY and Roll with Autoscale • Triggering: Edge, Pulse Width, Pattern, TV, Duration, Sequence,

CAN, LIN, Flexray, USB and more!• Easy-to-operate front-panel controls• Modes: Mani, zoom, roll, XY, segmented (optional)• Complete connectivity — 2 USB 2.0 high-speed drive, 2 USB

1.1 host,10/100-BaseT LAN, XGA out

ANALOG AND DIGITALSTORAGE OSCILLOSCOPES

InfiniiVision 7000 series highly-portable digital storage oscilloscopes (DSO) and mixed-signal oscilloscopes (MSO) arethe only scopes in their class engineered for maximum signal visibility, showing jitter, infrequent events and subtle detailother scopes miss. Powered by MegaZoom III technology that delivers a responsive deep memory, high-definitiondisplay system and a superior ability to capture transient signals. Displays up to 20 channels simultaneously with serialprotocol on 12.1″ display in a package only 6.8″ deep. Dimensions: 17.9 W x 10.9 H x 6.8″ D″, weight: 13 lbs. All modelscome complete with user’s manual and three-year manufacturer’s warranty. Order accessories, options andapplications separately below.

2190B

DIGITAL STORAGE OSCILLOSCOPES (DSO)

ACCESSORIES AND OPTIONS

NON-CALIBRATED

2530

2532

2534, 2540, 2542



9




ANALOG OSCILLOSCOPES (CONT.)ANALOG AND DIGITAL STORAGE OSCILLOSCOPES (CONT.)

Mfg.Part No.

Atten-uation

SystemBand-width

(-3dB) MHz

SystemRisetime

ns

System InputResis-tance* Mohm

Capaci-tance*

pF

Compen-sationRange

(pF)

Read-out

Actu-ator Stock No.

PriceEach

1-45800A X1 30 11.66 1 57 NA 93F2889 68.804550B X1/X10 15/100 23.33/3.5 1/10 64/10.5 NA/10-60 93F2888 75.386101A X10 150 2.33 10 10.5 10-30 X 16F4656 71.775803A X10 200 1.75 10 10 10-60 98F5200 77.665806A X1/X10 20/200 17.5/1.75 1/10 77/11.5 NA/10-60 98F5150 86.275827A X100 200 1.75 10 5.5 15-50 93F2949 138.606069A X10 250 1.4 10 10 10-30 16F4658 80.006102A X10 250 1.4 10 10 10-30 X 16F4659 86.405809A X10 300 1.17 10 17 10-60 90F2359 138.635812A X10 300 1.17 10 17 10-60 X 90F2361 142.656266 X1/X10 20/60 17.5/5.83 1/10 65/11 N/A/10-60 02B1794 52.385795A X10 100 3.5 10 9.5 10-60 90F2365 57.11

Mfg. Part No. 72-7230Bandwidth 50 MHzSensitivity 1 mV/divRise Time 7nsHoriz. Sweep 0.2 microSec to 0.5 Sec/DivSampling 20 MSPS

Channels Bandwidth Sensitivity Rise TimeHoriz.Sweep

Non-CalibratedMfg. Part No. Stock No. Price Each

2 50 MHz 5 mV/div 7ns 0.1microSec to0.5 Sec/Div

72-6815 18C2260 733.20

2 100 MHz 2 mV/div 3.5ns 50 nSec to0.5 Sec/Div

72-6820 18C2258 1184.40

2 200 MHz 2 mV/div 3.5ns 20 nSec to0.5 Sec/Div

72-6825 18C2257 1729.60

Channels Bandwidth Sensitivity Rise TimeHoriz.Sweep

Non-CalibratedMfg. Part No. Stock No. Price Each

2 20 MHz 5 mV/div 17.5ns 0.2microSec to0.5 Sec/Div

72-6800 18C2256 407.00

2 20 MHz 5 mV/div 17.5ns 0.2microSec to0.5 Sec/Div

72-6805 18C2254 473.00

2 35 MHz 5 mV/div 10ns 0.1microSec to0.5 Sec/Div

72-6810 18C2253 488.80

Mfg. Part No. Description Color Length Stock No.Price Each

1-472940-2 X10 Insulated Scope Probe Red 47″ 39M4484 180.9272940-8 X10 Insulated Scope Probe Gray 47″ 39M4485 180.9272941 X10 Insulated Scope Probe Kit ... ... 39M4486 338.2172942 X10 Insulated Scope Probe and Lead Kit ... ... 39M4487 329.89

(10016)

Mfg. Part No. Description Stock No. Price Each72-6815 CALIBRATED W/DATA 50 MHz Analog Oscilloscope 36C2998 843.2072-6825 CALIBRATED W/DATA 200MHz Oscilloscope 36C3000 1839.60

Mfg. Part No. Bandwidth Sample Rate Rise Time Stock No. Price Each72-8380 200 MHz 1S/s-500MS/s 1.8ns 05N0958 1250.0072-8385 100 MHz 1S/s-500MS/s 3.5ns 05N0957 995.0072-8390 40 MHz 1S/s-500MS/s 8.7ns 05N0956 759.0072-8395 25 MHz 1S/s-500MS/s 14ns 05N0955 499.00

Mfg. part no. Description Stock No. Price Each72-7230 50MHz 100MS/s Analog/Digital Oscilloscope 16H5081 979.00

(115435)

PASSIVEOSCILLOSCOPEPROBES

(90841)

(84488)

(84479)

These general purpose probes feature high performance for greater flexibility. Complete accessory kit included. Allprobes are rated 300V (DC + Peak AC) per IEC1010-2-03. Cat I, cables are 1.2 meters except Mfg. part no. 5827A,which is 2.0 meters.

ANALOGOSCILLOSCOPES

DIGITAL/ANALOGOSCILLOSCOPES

DUAL CHANNEL DSOCOLOR OSCILLOSCOPES

OSCILLOSCOPEPROBES AND KITS

*Measurements based on 1 MΩ, 20pF oscilloscope.

Mfg. part no. 72940 scope probes include black ground lead, sprung hook, and probe tip ground. Mfg. part no. 72941scope probe kits contain both a red and grey scope probe, black ground lead, a red and a gray sprung hook, and a probetip ground. Mfg. part no. 72942 probe and lead kit contains mfg. part no. 72940-2 red scope probe, black ground lead,red sprung hook, probe tip ground, mfg. part no. 5907A test leads, mfg. part no. 5916A and 6041B alligator clips,mfg. part no. 5910B and 5912B grabbers, and mfg. part no. 6146 carrying case.

Features

Features

72-8380, 72-8385, 72-8390

• Wide bandwidth• High sensitivity• Variety of trigger modes• Reliable• Easy to use• Economically priced• 110-230VAC, 50-60Hz operation


1-22530 25 MHz, 250MSa/s Digital 60M9896 499.002532 40 MHz, 500 MSa/s Digital 01P0073 699.002534 60 MHz, 400 MSa/s Digital 15N0036 799.002540 60 MHz, 1GSa/s Digital 04P2070 940.002542 100 MHz, 1GSa/s Digital 04P2071 1155.00

Features

72940-2

• Dual channel, dual trace• Cursors and readouts• Waveform memory• Front panel settings memory• RS232 port• 110-230V, 50-60Hz operation

• Easy to use• Economically priced• 110-240VAC, 45-440Hz operation

(5396)

72942

Use analog technology for real-time acquistion. Digital mode allows pre-trigger events to be observed, waveforms to bestored and transients to be frozen.

Mfg. part no. 72-6805 has built-in 1MHz function generator. Mfg. part no. 72-6825 also has a built-in six digit counter.Mfg. part no. 72-6820 and 72-6825 feature Cursors, Readouts, Autoset, Front Panel Setting Lock and Front PanelSetting Memory. Calibration with printed certification and data report available on all models, go online or call Newark.

• Wide bandwidth• High sensitivity• Variety of trigger modes• Reliable

72-6825

72-7230


Dual Channel Storage Oscilloscopes feature add, subtract, multiply, divide, reverse and FFT. Connect to a PC forextended analysis. Trigger type: edge, pulse, video and alternative. Record length max., 1M. Full-color 64k LCD screen,320x240. Standard RS-232C USB connection. Include 1x and 10 x swirchable probe, power cord and English manual.

72-8395


2172

9


OSCILLOSCOPES & LOGIC ANALYZERS • PC-BASED OSCILLOSCOPES


SPECIFICATIONS PICOSCOPE 5204Buffer Size, 1 Ch. in Use 128 MS/ChannelBuffer Size, 2 Ch. in Use 64 MS/ChannelNo. of Channels 2.5 K Points on All ModelsVertical Resolution 2.5 K Points on All ModelsBandwidth (At Probe Tip) 2.5 K Points on All ModelsResolution 2.5 K Points on All ModelsInputs 2.5 K Points on All ModelsOutput 2 mV to 5V/div on All Models

with Calibrated Fine AdjustmentVoltage Ranges 2.5 K Points on All Models

60, 100 AND 200MHz REPLACEMENTOSCILLOSCOPE PROBE KITS

Provide digitized signals accurately and with minimal distortion, together with 250 MHz analog bandwidth comple-mented by a real-time sample rate of 1 GS/s. For repetitive signals, equivalent time sampling (ETS) mode increases thesampling to 20 GS/s. Substantial 128 megasample (128,000,000) record length of the 5204 ensures complexwaveforms can be captured at the full sampling rate. Includes 2 x 250 MHz switchable probes, USB cable, universal ACadaptor, carry case, PicoScope oscilloscope software, free software updates for life, and 24-month manufacturerwarranty.

Mfg. Part No.No. of

ChannelsBand-width

Single-ShotSampling

RepetitiveSampling

Resolution(Bits) Stock No.

PriceEach

PICOSCOPE 2104 1 10 MHz 50 MSPS 1 GS/s 8 02M0837 207.00PICOSCOPE 2105 1 25 MHz 100 MSPS 2 GS/s 8 02M0838 328.00

SpecificationsBandwidth (X10) 100MHz (-3dB) into 16pFRiseTime (X10) <3.5nsecInput Impedance (X1/X10) 1mΩ/10MΩ

Mfg. Part No.Attenu-ation

Bandwidth

-3dB MHzInputMΩ

Capaci-tance

pF

Compen-sation Range

pF Stock No.

Price Each

1-4 5-96491 x1 25 1 <39.5 NA 30C5071 70.33 66.446493 x10 60 10 <12.5 15 - 40 30C5073 62.35 58.906494* x10 60 10 <12.5 15 - 40 30C5074 81.21 76.726495 x10 100 10 <13 10 - 35 30C5075 92.55 87.446496 x10 350 10 <14.5 10 - 35 30C5076 122.08 115.336497* x10 350 10 <14.5 10 - 35 30C5077 126.10 119.136498 x100 350 50 <7.5 10 - 50 30C5078 136.74 129.176499 1:1

10:160 1

10<78<13

NA15-40

29C7326 80.06 75.63

6500 1:110:1

100 110

<80<13

NA10-35

30C5079 82.01 77.47

SpecificationsBandwidth (X10 Position)

250MHz (-3dB) into 14pF

Rise Time (X10 Position)

<1.4nSec


1-221-1925 Test Equipment Cart 92F5415 95.95

• EN61010-2-031 CATI (IEC1010)• 600V (DC+AC Peak)• Low Noise - Improved Compensation• 1.2m Cable Length• 10-35pF Compensation Adjustment• REF Position, Tip Disconnected and Scope Input Grounded

(Types 76-102 and 76-105 Only)• Accessory Kit and Storage Pouch Included

(89093)

(32192)

(69008)

Mfg. Part No. Description Stock No. Price Each76-106 250MHz Oscilloscope Probe 84N2148 73.9576-107 250MHz Oscilloscope Probe w/Readout Pin 84N2149 65.3476-110 Replacement Sprung Hook 84N2152 5.59

Mfg. Part No. Description Stock No. Price Each76-123 100MHz Insulated Replacement Oscilloscope Probe Kit 18C2263 42.95

Mfg. part no. 76-109: 60MHz -3dB, x10 position, 10MΩ imped. (1MΩ input), 18pF capacitance, 5.8ns risetime.15MHz -3dB, x1 position, 1MΩ imped. (scope input), 46pF capacitance, 27ns risetime. Mfg. part no. 76-102: 100MHz-3dB, x10 position, 10MΩ imped. (1MΩ input), 16pF capacitance, <3.5ns risetime. 6MHz @ -3dB, x1 position, 1MΩimpedance (scope input), 90pF capacitance, 58ns risetime. Mfg. part no. 76-105: 200MHz -3dB, x10 position, 10MΩimped. (1MΩ input), 14pF capacitance, <1.8ns risetime. 10MHz @ -3dB, x1 position, 1MΩ imped. (scope input), 90pFcapacitance, 35ns risetime.

REPLACEMENT OSCILLOSCOPE PROBES

(61379)

PEN-TYPE PC-BASEDOSCILLOSCOPES

TEST EQUIPMENT CART

(5922)

250MHz REPLACEMENT OSCILLOSCOPE PROBES

Designed for use with a wide variety of oscilloscopes. Fine tip probes are suited for probing high-density chip leads withless than 0.06″(1.52mm) spacing. Features include compact ergonomically designed probe handle. Probe sets includethe probe, BNC adapter, ground blade, 8.7in (22cm) ground lead, IC tip adapters with 0.8mm to 1.27mm pitch,insulating tip, protection cap, solid tip, spring tip, sprung hook, trimmer tool, 2 footer positioner, and complete set ofinstructions and specifications (1 each). Max. input voltage is 600V, cable length is 1.2m (except Mfg. part no. 6498)max. input voltage is 2000V and cable length is 2m. Oscilloscope probes come with complete set of instructions andspecifications.

Plug a PicoScope® pen-type PC-based oscilloscopeinto your computer’s USB port, install the Pico-Scope® software and you are ready to take mea-surements, with no additional batteries, power sup-plies, or accessories required. Digital ETS providesup to 2 GS/s sampling for repetitive signals. Bothmodels include PicoScope® software, PicoLog® dataacquisition software, and 32-bit programming librar-ies. Compatible with Windows® 98SE, ME, 2000,and XP systems.

Equipment cart features slanted top for convenientviewing angle and adjustable back support. Lowershelf for storage, heavy-duty casters. Color: gray.Dimensions: 33.5H x 16W x 19″D.

100MHz INSULATED REPLACEMENTOSCILLOSCOPE PROBE KIT

Mfg. Part No. Description Stock No. Price Each76-109 60MHz Range 84N2151 26.9576-102 100MHz Range 84N2144 37.9576-105 200MHz Range 84N2147 47.9576-110 Replacement Sprung Hook 84N2152 5.59

*Mfg. part no. 6494 and Mfg. part no. 6497 are supplied w/ Readout Actuator.

• X1/X10 (type 76-107 is X10 only)• 1MΩ and 10MΩ Input Impedance• EN61010-2-031 CAT I (IEC1010)• 600V (AC+DC Peak)• Low Noise, Improved Compensation• 1.2m Cable Length• 10-35pF Compensation Adjustment• Accessory Kit and Storage Pouch Included• Type 76-107 Includes Readout Actuator Pin

• Insulated BNC• X1/X10 Attenuation• 1.2m Cable Length• 10 -35pF Compensation Adjustment• 600V Maximum Input (DC + AC Peak)• Meets IEC61010-2-031 CAT I 600V Requirements

PICOSCOPE 5000 SERIESOSCILLOSCOPE

(5923)

REPLACEMENT SPRUNG HOOK

Ideal for portable oscilloscope and otherportable instruments. Includes accesssorykit and storage pouch.

• High bandwidth and sample rate• Arbitrary waveform generator• Massive buffer memory• High speed data acquistion• Advanced Triggers



9


PC-BASED OSCILLOSCOPES • BENCH DIGITAL MULTIMETERS


SPECIFICATIONS PICOSCOPE 5204Standard Waveforms 2.5 K Points on All ModelsSpecial modes 2.5 K Points on All ModelsSample rate 2.5 K Points on All ModelsAccuracy 2.5 K Points on All ModelsTimebase Accuracy 2.5 K Points on All ModelsAmplitude 8-Bit (Normal or With Averaging)

PICOSCOPE 5000 SERIES OSCILLOSCOPE (CONT.)

(148860)

Mfg. Part No. U3401A U3402A U3606ADisplay DualResolution 50,000

countsSelectable 119,999,

39,999 or 3999 counts120,000 counts

DC Voltage Accuracy: 0.02%Range: 500mV - 1000V

Accuracy: 0.012%Range: 120mV - 1000V


True RMS AC Voltage




True RMS AC+DC Voltage



Accuracy: 0.05%Range: 10mA - 3A

DC Current Accuracy: 0.05%Range: 500µA - 10A



True RMS AC Current

Accuracy: 0.5%Range: 500µA - 10A



True RMS AC+DC Current

Accuracy: 0.5%Range: 500µA - 10A


---

Resistance 2-wireAccuracy: 0.1%

Range: 500Ω - 50MVΩ

Selectable 2- or 4-wireAccuracy: 0.05%

(for 4-wire)Range: 120Ω- 120MΩ

2-wireAccuracy: 0.05%

Range: 100Ω- 100Ω4-wire

Accuracy: 0.25%Range: 100mΩ- 10Ω

Frequency Accuracy: 0.01%Range: 500Hz - 500kHz

Accuracy: 0.005%Range: 1200Hz - 1MHz

Accuracy: 0.02%Range: 2Hz - 300kHz

Diode, Continuity Yes Yes YesMath Functions dBm, Relative, Min/Max,

Compare, Hold, Duty CycledBm, Relative, Min/Max,

Compare, HoldNull, dB, dBm, Min/Max/Avg,

Limit, Hold Security Kensington lock slot

Mfg. Part No. Description Stock No. Price EachU3401A 4 1/2 digit Dual Display Digital Multimeter 10R2310 449.00U3402A 5 1/2 digit Dual Display Digital Multimeter 10R2312 600.00

U3606A MULTIMETER/DC POWER SUPPLYMfg. art no. U3606A multimeter/ DC power supply hybrid combines a 5 1/2 digit dual-display DMM and 30-Wdual-output supply in a single unit. Operating simultaneously and independently, the instruments provide efficient,testing while saving space on the bench or in a rack. The DMM includes essential multimeter capabilities, as well as,four-wire milliohm measurements and four math functions. The power supply adds overvoltage and overcurrentprotection plus auto scan and ramp, and a square-wave generator. Includes quick start guide, product reference CD, IOlibrary suite, certificate of calibration, combo test lead kit, USB cable and AC power cord.

U3606A MultimeterDC Power Supply 10R2314 1199.00ACCESSORIES

U3400A-1CM Rackmount Kit 10R2308 58.34U3400A-1CN Lock Link Kit 10R2309 55.16U3606A-1CM Rackmount Kit 10R2316 58.34U3606A-1CN Lock Link Kit 10R2317 55.16U8201A Combo Test Lead Kit 10R2318 37.91U8202A Electronic Test Lead Kit 10R2319 29.12

(148577)

Mfg. Part No. Description Stock No. Price EachPICOSCOPE 5204 PC Oscilloscope, 128 MS/Ch. max. 42M3152 3231.00

U3400 SERIES DUAL DISPLAY DIGITALMULTIMETERS AND U3606AMULTIMETER/DC POWER SUPPLY

(94403)

Mfg. Part No.No. of

ChannelsBand-width

Real-Time

Sampling*RepetitiveSampling*

Reso-lution(Bits) Stock No.

PriceEach

PICOSCOPE 2202 2 2 MHz 20 MSPS ... 8 02M0839 328.00PICOSCOPE 3224 2 10 MHz 20 MSPS ... 12 02M0843 659.00PP298 4 10 MHz 20 MSPS ... 12 02M0844 1154.00PICOSCOPE 3204 2 50 MHz 50 MSPS 2.5 GS/s 8 02M0840 659.00PICOSCOPE 3205 2 100 MHz 100 MSPS 5 GS/s 8 02M0841 989.00PICOSCOPE 3206 2 200 MHz 200 MSPS 10 GS/s 8 02M0842 1319.00

Mfg. part nos. U3401A and U3402A dual-display digital multimeters provide basic capabilities with good performanceat 4 1/2 or 5 1⁄2 digits. PC-grade lock slot for physical security. Benchtop units are ideal for use in educational, electronicsand communications applications. Includes quick start guide, product reference CD, certificate of calibration, test leadkit and AC power cord.

Mfg. Part No. Description Stock No.PriceEach

OSCILLOSCOPE PROBE 60MHZ 60 MHz General-Purpose Passive OscilloscopeProbe, x1/x10

02M0835 24.75

OSCILLOSCOPE PROBE 250MHZ 250 MHz High-Impedance PassiveOscilloscope Probe, x1/x10

02M0834 41.25

OSCILLOSCOPE X10/X100 25 MHz Active Differential Oscilloscope Probe,x10/x100

02M0836 321.75

• Up to 119,999 counts resolution • Up to 0.012% DCV accuracy• 11 basic measurements:

DC, AC and AC+DC (True RMS) voltage and currentSelectable 2 or 4-wire resistance (Note: 2-wire only,for mfg. part no. U3401A)Frequency, continuity and diode tests

• Dual display on bright VFD • Built-in math functions: dBm, relative, min/max,

compare, hold • Selectable resolutions for variable measurement

speeds (mfg. part no. U3402A only)

(89092)

DMM SPECIFICATIONS:

PC-BASED DIGITALOSCILLOSCOPES AND PROBES

• Two instruments in one box saves space and enables simultaneous, independent operations• Basic 5.5-digit DMM functions + 4-wire milliohm measurement • Basic DC power supply functions with protection features + auto scan and ramp + square-wave • USB-TMC488.2 and GPIB connectivity • Universal AC input

Mfg. part nos. U3401A and U3402A:

PicoScope® series PC-based digital oscilloscope modules and software work with your personal desktop computer orlaptop. Simply plug the PicoScope® module into your computer’s USB port, connect scope probes, ordered separatelybelow, to the module, and install the PicoScope® software (included) on your computer. No power supply is required.The result is an ideal economical replacement for traditional bench oscilloscopes.

PicoScope® software provides scope, spectrum analyzer and multimeter functions, and it makes full use of your PC’sprocessing capabilities by allowing you to view real-time signals, zoom in on your signal, and save and print capturedwaveforms. Also supplied is PicoLog® data acquisition software that transforms your PC into a high-speed data logger.Deep memory buffers and advanced trigger modes allow the capture of large amounts of complex data at high speeds.High-speed USB 2.0 connectivity is standard on all models.

PicoScope 3224 and 3424 are high-resolution, general-purpose PC-based precision oscilloscopes, accurate to 1%with 12 or 16 bit resolution. They are ideal for audio, noise and vibration measurements. When used as a spectrumanalyzer, the wide dynamic range of these high-resolution oscilloscopes facilitates tracking down noise in sensitiveanalog circuits.

Mfg. part no. U3606A Only:

PROBES

• Kensington lock slot

PicoScope 2202 PicoScope 3000Series

All Models:

60MHz Passive Probe250MHz Passive Probe

25MHz ActiveDifferential Probe

*Sampling rates are for single channel use


2174

9


BENCH DIGITAL MULTIMETERS


(148861)

Basic VDC Accuracy 0.01%DC Voltage 1000VAC Voltage 750VResistance (2x4 Wire Ohms) 100MΩDC Current 200uA to 10AAC Current 20mA to 10AFrequency/Period 20Hz to 1MHzContinuity/Diode Test YesMath Functions Min./Max., relative, hold, compare, dB

Mfg. Part No. Fluke-8845A Fluke-8846ABasic VDC Accuracy 0.0035% 0.0024%DC Voltage 1000VAC Voltage 750V 1000VResistance (2x4 Wire Ohms) 100MΩ 1GΩDC Current 100uA to 10AAC Current 10mA to 10A 100µA to 10AFrequency/Period 3Hz to 300kHz 3Hz to 1MHzContinuity/Diode Test YesCapacitance ... 1nF to 0.1FTemperature RTD ... -200° to +600°

ADVANCED FUNCTIONSAnalytical Functions Statistics, Histogram, TrendPlot™, Limit CompareMath Functions Ratio, NULL, Min./Max. Ratio, NULL, Min./Max., dB/dBm

INPUT/OUTPUTUSB Device Memory Drive Port ... YesReal Time Clock ... YesInterfaces RS-232, IEEE-488.2, EthernetProgramming Languages/Emulation Modes

SCPI (IEEE-488.2), Agilent 34401A, Fluke-45

Mfg. Part No. 34405A 34401A 34410A 34411A 3458A 34420ADigits 51⁄2 Digit 61⁄2 Digit 61⁄2 Digit 61⁄2 Digit 81⁄2 Digit 71⁄2 DigitDual-Display

Two Channels

AC Voltage

ACV Accuracy 0.2% 0.06% 0.06% 0.06% 0.007%DC Voltage

DCV Accuracy 0.025% 0.0035% 0.0030% 0.0030% 0.0008% 0.003%AC/DC Current

2-Wire Resistance

4-Wire Resistance

Low-Power Resistance

Resistance Accuracy

0.05% 0.010% 0.010% 0.010% 0.0010% 0.006%

Frequency

Period

Ratio

Difference

Continuity

Diode Test

Capacitance

TemperatureThermistor RTD,

ThermistorRTD,

ThermistorRTD,

Thermistor

Thermocouple, Direct SPRT,

RTD, Thermistor

Triggering S/W, H/W, Pre-, Post-

Trigger, LevelSW or H/W

Math Functions

Null, Limit Test, dB, dBmMin./Max.,

HoldStatistics

Scale, Offset, Filter% Error Moving Average Filter

Connectivity IntuiLink Software, GPIBUSB 2.0 RS-232 USB 2.0 USB 2.0 RS-232

LAN, LXI-C

Mfg. Part No. Description Stock No. Price Each8808A 120V 5.5 Digit Multimeter 61M3746 775.008808A/SU 120V 5.5 Digit Multimeter, SW USB Cable Kit 61M3747 985.00

Mfg. Part No. Description Stock No. Price Each8845A 120V Benchtop Precision Digital Multimeter, 35ppm 83K1738 995.008846A 120V Benchtop Precision Digital Multimeter, 25ppm, USB/Memory 83K1739 1395.00

Mfg. Part No. Description Stock No. Price Each34405A 51⁄2 Digit, Dual-Display Benchtop Digital Multimeter 82K9129 750.0034401A 61⁄2 Digit, Benchtop Digital Multimeter 91F3030 1072.0034410A 61⁄2 Digit, Next Generation Dual-Display Benchtop

Digital Multimeter60K0566 1298.00

34411A 61⁄2 Digit, High-Performance Dual-Display BenchtopDigital Multimeter

60K0567 2006.00

3458A 81⁄2 Digit, Benchtop Digital Multimeter 92H4778 8095.0034420A 71⁄2 Digit, Nanovolt/Micro-ohmmeter 95H8766 3827.00

CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORTAll other models available with certificate of calibration; go online or call.

34401A CALIBRATED Benchtop Digital Multimeter with Certificate ofCalibration

60K7399 1162.00

ACCESSORIES

5063-9240 Rack Mounting Kit 91F3066 91.4334161A Accessory Pouch 91F3034 43.41

(15236)

(102969)

(88093)

34000 SERIES BENCHTOPDIGITAL MULTIMETERS

FLUKE 8808A DIGITAL MULTIMETERS

FLUKE-884xA SERIES BENCHTOP PRECISIONDIGITAL MULTIMETERS

• 5.5-digit resolution• Basic VDC accuracy of 0.01%• Dual display• 2x4 Wire Ohms measurement technique• Six dedicated buttons for fast access to instrument setups• Hi/Lo limit compare for pass/fail testing

34000 series benchtop digital multimeters measure DC voltage up to 1000V across 5 ranges, AC voltage up to 750Vfrom 3Hz to 300kHz, DC and AC current, resistance (up to 100MΩ across 7 ranges), frequency, and period (to 300kHz)with laboratory accuracy and at production-line speeds. They deliver dependable results and convenient features thatminimize test and troubleshooting times. Standard commands for programmable instruments (SCPI) as well as othercommand languages are built in. Power: 100/120/220/240V, 45-65Hz, 360-440Hz. Mfg. part nos. 34410A and34411A high-performance, dual-display DMMs have all of the professional qualities of mfg. part no. 34401A plusgreatly improved performance, flexibility and speed.

• 2x4 Wire Ohms measurement technique• Analytical Modes: TrendPlot™,

Histogram and Statistics• RS-232, IEEE-488 and LAN interfaces• USB Device Port for memory storage

devices (Fluke-8846A Only)• Popular DMM emulation modes• One-year manufacturer’s warranty

Fluke-8808A 5.5-digit multimeter has a broad range of functions,measuring volts, ohms and amps. Six setup buttons for instrumentpresets on front panel. Set up meter for a measurement, press shift and asetup button (1-6) and setup is saved. Pressing setup button then resetsmultimeter to saved setting. Includes TL71 test leads, line cord, spare linefuse, user manual on CD ROM.

Fluke-8845A and Fluke-8846A, 6.5 digit precision multimeters have the precision and versatility to handle demandingmeasurements on the bench or in a system. Both models are designed to comply with IEC 61010-12000-1,ANSI/ISA-S82.01-1994, CAN/CSA-C22.2 No.1010.1-92, 1000V CAT I/600V CAT II standards.

• Multi-function flexibility• Laboratory accuracy at production-line speeds• True RMS AC Volts and Current• RS-232 and GPIB Standard• Store up to 512 Readings

SPECIFICATIONS AT A GLANCE:

SPECIFICATIONS

COMPARISION AT A GLANCE:

8808A

Fluke-8846A34411A



9


BENCH DIGITAL MULTIMETERS • MICRO-OHMMETERS


Mfg. Part No. Description Stock No. Price Each310 Digital milliohmmeter, 4-wire Kelvin lead set 54M5383 469.00

Mfg. Part No. 2831D 5491A 5492True RMS X X X

VDC Accuracy

0.0005 0.0002 0.00012

DC Voltage 200 mV-1200V 500 mV-1000V 120 mV-1000VAC Voltage 200 mV-1000V 500 mV-750V 120 mV-750VDC Current 200uA to 20A 500uA to 10A 12mA to 12AAC Current 200uA – 20A 500uA -500mA 40mA – 12AResistance 200 Ohm - 20 MOhm 500 Ohm - 50 MOhm 1 mOhm- 300 MOhmFrequency 200Hz to 200kHz 500Hz to 500kHz 1200Hz to 1MHz

RS232 ... X XDBm ... X ...

2 or 4 Wire Resistance ... ... XMin/Max ... ... XData Hold ... ... X

GPIB Interface ... ... Optional


PriceEach

DLRO10 Digital Low-Resistance Microhmmeter 58K9691 2900.00DLRO10X Digital Low-Resistance Microhmmeter with Data Storage/

Downloading58K9692 3615.00

ACCESSORIES

EV6121-492 Rechargeable NiMH Battery Module 89K7296 430.00EV6280-333 NiMH Battery Module Charger 89K7146 205.00

Mfg. Part No. Description Stock No. Price Each72-7400 Wide-Range Microhmmeter 01H9899 937.13


2831D 4 1/2 Digit True RMS Bench Digital Multimeter 26K2806 319.005491A 50,000 Count Digit Dual Display Bench Multimeter 84H1355 419.005492 120,000 Count Dual Display Bench DMM, 0.012% DCV Accuracy 25H8167 725.00

(85560)

Specifications Range Resolution Current Accuracy ±(%rdg+digits)Resistance 20mΩ 0.01mΩ 1A ±(0.2%+6d)

200mΩ 0.1mΩ 1A ±(0.2%+4d)2Ω 0.001Ω 100mA ±(0.2%+4d)20Ω 0.01Ω 10mA ±(0.2%+4d)200Ω 1Ω 1mA ±(0.2%+4d)2kΩ 0.001kΩ 100uA ±(0.2%+4d)20kΩ 0.1kΩ 10uA ±(0.2%+4d)

Power 110VAC, 60Hz or 220VAC, 50HzDimensions 11 x 8.3 x 3.5″ (280 x 210 x 90mm)Weight 4.85lbs (2.2kg)

(73621)

Specifications Range Resolution Max Voltage Accuracy ±(%rdg+digits)Resistance 200mΩ 100µΩ 3.8VDC ±(0.75%+4d)

2000mΩ 1mΩ 3.4VDC ±(0.75%+2d)20Ω 10mΩ 3.4VDC ±(0.75%+2d)200Ω 100mΩ 3.2VDC ±(0.75%+2d)2kΩ 1Ω 3.2VDC ±(0.75%+2d)

Power 110VAC, 60Hz or 220VAC, 50HzDimensions 9.3 x2.8 x 3.4″ (160 x120 x 85mm)Weight 1.5lbs (680g)

(101645)

DIGITAL MILLIOHMMETER

(84894)

Mfg. Part No. Description Stock No. Price Each380560 Precision milliohm meter 110 VAC 27K9613 469.99380562 Precision milliohm meter 220 VAC 27K9615 489.99380465 Spare Kelvin Clip Test Clip set 27K9612 59.99

Mfg. Part No. Description Stock No. Price Each380460 4-Wire milliohm meter, 110 VAC 27K9608 369.99380460-NIST 4-Wire milliohm meter, 110 VAC w/ NIST cert 27K9609 494.99380462-NIST Precision Milliohm Meter; 220 VAC w/NIST cert 27K9611 514.99380560-NIST Precision Milliohm Meter; 220 VAC w/NIST cert 27K9614 594.99380465 Spare Kelvin Clip Test Clip set 27K9612 59.99

DLRO® DIGITAL LOW-RESISTANCEMICROHMMETERS

• High Basic Accuracy of 0.1%• Wide Range of 1µ Ohm to 20k Ohm• Current Reversal Switch for Detecting Thermal emf Effects• Current Diversion Switch for Easy Zeroing• 4 Terminal Measurement Using Kelvin Clip Leads• Battery Operation with Built-in Charger• 20mV Clamp for Dry Circuit Testing• Includes Manual, Kelvin Test Clip Leads, IEC Mains Lead

(91238)

BENCH MULTIMETERS

DLRO10X

PRECISION MICROHMMETER

• Four-wire Kelvin leadmeasurements

• Over-voltage and over-temperature protection

• Five ranges with 100u ohm maxresolution

• Auto power off

(91239)

• Small and lightweight — ideal for tight places• Accurate results within 3 seconds• Automatically detects continuity• 10A output current• Resistance ranges from 599.9µΩ to 1999.9Ω• Resolution up to 0.1µΩ• Displays average of results for forward and reverse current• One-year manufacturer’s warranty

SPECIFICATIONS

Mfg. part no. 310 milliohmmeter features a display resolution of 100 microohms and a professional 4-wire Kelvin testlead set for accurate readings. Heavy-duty case has rubber seal for water resistance. Includes shoulder strap andbatteries.

A dedicated but versatile instrument, mfg. part no. 72-7400 is fully optimized for the task of accurate measurement oflow resistances with a best resolution of 1µOhm. It generates sufficient test voltage across the unknown resistance tocombat noise and reduce thermal emf effects to manageable levels. Current reversal can then be used to eliminate anyremaining thermal offset. Battery: 4 internal Ni-MH cells (non-removable). AC Line: Built-in battery charger allowsinstrument operation while recharging. Nominal recharging time: 16 hours. Power: 115V or 230V ±14% 50/60Hz,adjustable internally; 20VA max. Operating electrical safety: Complies with EN61010-1. EMC: Complies with EN61326.Dimensions: 10.3W x 3.4H x 9.2″D (220 x 82 x 230mm) excluding feet and tilt stand. Weight: 1.3 kg (3 lb.).

PRECISION MILLIOHM METER

HIGH RESOLUTIONMILLIOHM METER

• High accuracy and performance for lowresistance measurements

• Large 0.7″(18mm) LCD 1999 count• 4-wire cables with Kelvin clip connectors• Manual zero display adjust• Over range indication• Built into compact, durable field service housing

with protective cover• Wide operating conditions 0 to 50°C, less than

80%RH• One year warranty

MEGGER DUCTER® DLRO10 and DUCTER® DLRO10X bring new standards to low-resistance measurement. BothDLRO® models are fully automatic instruments, selecting the most suitable test current, up to 10A DC to measureresistance from 0.1µΩ to 2000Ω on one of seven ranges. For users who desire more control over the measurementprocess, mfg. part no. DLRO10X uses a menu system controlled by a two-axis paddle to allow manual selection of thetest current. Mfg. part no. DLRO10X also adds real-time download of results and on-board storage for later download toa PC. Both DLRO® models come complete with two DH4 duplex handspike test leads, rechargeable 7Ah NiMH batterymodule, external battery charger for operation from 115/230V 50/60Hz supply, cigar lighter adapter for batterycharging, and user guide. Order additional battery modules and battery charger separately below.

• 7 ranges for wide low resistance measurements• High resolution to 0.01mΩ• 1999 count display with large 0.8″ digits• 4 wire-test cable with Kelvin clip connectors• Automatic zero• Built-in comparator for hi/lo/go resistance testing

or selection• One year warranty

Mfg. Part No. DLRO10X Only:

Complete with 4-wire cables with Kelvin clip connectors and power cord.

Complete with 4-wire cables with Kelvin clip connectors and power cord.

• Backlit display• Displays individual forward/reverse measurements and average• Datalogging and download• Alpha-numeric keypad for entering test notes• Autoranging with manual output• Selectable high and low limits

SPECIFICATIONS

SPECIFICATIONS

Mfg. Part Nos. DLRO10 and DLRO10X:


2176

9


MICRO-OHMMETERS • DC POWER SUPPLIES


(148833)

Mfg. Part No. Description Stock No. Price EachN5741A 6V, 100A 56J9856 2447.00N5742A 8V, 90A 56J9857 2447.00N5743A 12.5, 60A 56J9858 2447.00N5744A 20V, 38A 56J9859 2447.00N5745A 30V, 25A 37J0610 2447.00N5746A 40V, 19A 56J9860 2447.00N5747A 60V, 12.5A 56J9861 2447.00N5748A 80V, 9.5A 56J9862 2447.00N5749A 100V, 7.5A 56J9863 2447.00N5750A 150V, 5A 56J9864 2447.00N5751A 300V, 2.5A 56J9865 2447.00N5752A 600V, 1.3A 56J9866 2447.00

1500 W

N5761A 6V, 180A 56J9867 2900.00N5762A 8V, 165A 56J9868 2900.00N5763A 12.5, 120A 56J9869 2900.00N5764A 20V, 76A 56J9870 2900.00N5765A 30V, 50A 56J9871 2900.00N5766A 40V, 38A 56J9872 2900.00N5767A 60V, 25A 56J9873 2900.00N5768A 80V, 19A 56J9874 2900.00N5769A 100V, 15A 56J9875 2900.00N5770A 150V, 10A 56J9876 2900.00N5771A 300V, 5A 56J9877 2900.00N5772A 600V, 2.6A 56J9878 2900.00

RACKMOUNT KIT

N5740A Rack Mount Slide Kit 56J9855 138.00

Mfg. Part No. Description Stock No. Price Each12681 (444) Micro-Ohmmeter 89F2214 1672.4145029 Molded plastic case 01B7128 79.5500827 Standard test lead set 98F6132 60.63

Mfg. Part No. Total Power (W) Stock No. Price EachN6700B 400 45J0022 2385.00N6701A 600 60K0560 2706.00N6702A 1200 60K0561 3571.00

(82968)

(13168)

Mfg. Part No.Output

Voltage (V)Output

Current (A) Stock No. Price EachN6731B 5 10 56J9881 507.00N6732B 8 6.25 56J9882 507.00N6733B 20 2.5 56J9883 507.00N6734B 35 1.5 56J9884 507.00N6735B 60 0.8 56J9885 507.00N6736B 100 0.5 56J9886 507.00

N6740 SERIES BASIC DC POWER MODULES — 100W

N6741B 5 20 56J9887 934.00N6742B 8 12.5 56J9888 934.00N6743B 20 5 56J9889 934.00N6744B 35 3 56J9890 934.00N6745B 60 1.6 56J9891 934.00N6746B 100 1 56J9892 934.00


N6773A 20 15 60K0562 1355.00N6774A 35 8.5 60K0563 1355.00N6775A 60 5 60K0564 1355.00N6776A 100 3 60K0565 1355.00

N6750 SERIES HIGH-PERFORMANCE DC POWER MODULES — 50W, 100WN6750 series power modules, for applications where the power supply plays a critical role, provide low-noise,high-accuracy and programming speeds that are up to 10 to 50 times faster than other programmable power supplies.High-speed test extensions offer an oscilloscope-like digitizer that simplifies system configuration and increasesmeasurement accuracy when viewing high-speed transient or pulse events within the device-under-test (DUT). Inaddition, autoranging output capabilities enable one power supply to do the job of several traditional power supplies.

Mfg. Part No.Power

(W)Output

Current (A) Stock No. Price EachN6751A 50 5 56J9893 1149.00N6752A 100 10 56J9894 1583.00N6753A 300 50 64M0126 2440.00N6754A 300 20 39M6170 2440.00

N6760 SERIES PRECISION DC POWER MODULES — 50W, 100WN6760 series power modules for applications where precision is required provide precise control and measurements inthe milliampere and microampere region with the ability to simultaneously digitize voltage and current, and capturethose measurements in an oscilloscope-like data buffer.

N6761A 50 1.5 45J0457 2255.00N6762A 100 3 56J9895 2684.00

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachN6708A Filler Panel Kit 56J9879 54.67N6709A Rack Mount Kit 56J9880 142.00

N5700 SERIES SYSTEM DCPOWER SUPPLIES

MICRO-OHMMETER

Mfg. part no. 444 micro-ohmmeter uses test voltage of 100µV max. to avoid punch-through of contamination orcorrosion. Ideal for testing antenna grounding systems, conductive coatings, high power fuses, or aircraft skin bonding.41⁄2-digit, 20,000 count LCD. Measures from 1µΩ to 20Ω. 4 ranges: 20mΩ, 200mΩ, 2Ω, 20Ω. AC pulse and DCpolarity switching measurement methods. 120VAC power. Includes test leads and nicad battery for field use.

• 750W and 1500W high-power single-outputpower supplies

• Easy Front Panel Operation• Output Up to 600V and Up to 180A• Built-In Voltage and Current Measurement

(82996)

N6700 SERIES LOW-PROFILEMODULAR POWER SYSTEM

• Full Protection From Over-Voltage and Over-Current• Parallel Up to 4 Units for Higher Power• Universal AC Input 85 VAC to 265 VAC• LAN, USB, and GPIB Interfaces Standard

The N5700 series system DC power supplies have just the right performance - at just the right price - in a compact (1 U)package. This family of affordable 750 W and 1500 W single output programmable DC power supplies are designed tosimplfiy system development. Ideal for basic DC power applications, they provide stable output power, built-in voltageand current measurement, and output voltage and current from 6 V to 600 V and 1.3 A to 180 A. All models comestandard with GPIB, LAN and USB 2.0 interfaces. Rack mount ears and handles are provided standard with every unit. Anadditional N5740A rack mount slide kit makes it easy to integrate an N5700 series into a test rack by providing all thenecessary hardware to rack mount an N5700 series power supply in only 1 U of rack space.

• Choice of three power system mainframes: 400W, 600W or 1200W, • Up to four power modules housed in one mainframe: 50W, 100 W, or 300W, • Mix and match among basic DC, high performance, or precision power modules• Low-profile mainframe design — takes up only 1U of rack space• Stable, reliable DC output to 100V and 50A• Fast command processing: <1ms improves throughput• Connect via built-in GPIB, LAN, or USB

750 W

N6700 series is a flexible modular power platform that gives you the ability to mix and match 22 different DC powermodules to create a 1- to 4-channel DC power system optimized to meet specific test requirements. System engineerscan invest in high-performance outputs where speed and accuracy are needed, or purchase basic performance outputsfor simple DC power requirements. Plus it saves rack space for automatic test equipment (ATE) applications with thesmallest, highest density modular power supply available at only one rack unit high.

To build a modular power system, select mfg. part no. N6700B, N6701A or N6702A mainframe. Order up to fourmodules per mainframe. If fewer than four modules are used, the empty slots must be occupied by mfg. part no.N6708A filler panels; ordered separately below. When rack mounting mainframe, use only mfg. part no. N6700B-908rack mount kit; ordered separately below. NOTE: Do not use standard rack mounting hardware.

N6700B Mainframe (front view)DC Power ModulesN6700B Mainframe (rear view)


MODULAR POWER SYSTEM MAINFRAMES — 4-SLOTS

N6730, N6740, and N6770 series of basic DC power modules provide programmable voltage and current,measurement and protection features at an economical price, making these modules suitable to power thedevice-under-test (DUT) or to provide power for ATE system resources, such as fixture control.

Small in size the mfg. part nos. N6700B, N6701A and N6702A mainframes come standard with built-in measurementof voltage and current, protection features against over-voltage, over-current, and over-temperature; GPIB, USB 2.0,and 10/100 Base-T Ethernet LAN interfaces for connectivity, and interfacing disabling for extra security. Also, allnonvolatile RAM data and settings can be cleared from the front panel.



9


DC POWER SUPPLIES


N8700 SERIES HIGH POWER DC POWER SUPPLIES (CONT.)

Mfg. Part No.Output Ripple and Noise

VoltageMeter Resolution

Volts Amps Volts AmpsE3610A 8V or

15V3A or2A

<200µVrms, <2mVp-p 10mV 10mA

E3611A 20V or35V

1.5A or0.85A


E3612A 60V or120V

0.5A or0.25A


E3614A 8V 6A <200µVrms, <1mVp-p 10mV 10mA

Required mainframe: 66000AMfg. Part No.: 66101A 66102A 66103A 66104A 66105A 66106AGPIB: Yes Yes Yes Yes Yes YesOutput Voltage: 0-8V 0-20V 0-35V 0-60V 0-120V 0-200VOutput Current: 0-16A 0-7.5A 0-4.5A 0-2.5A 0-1.25A 0-0.75ARipple RMS: 2mV 3mV 5mV 9mV 18mV 30mVPower: 128W 150W 150W 150W 150W 150W

Mfg. Part No.Output Voltage

(V)Output Current

(A) Max. Power Stock No. Price EachN8731A-831-230 8 400 3200 10R2020 4690.00N8731A-861-208 8 400 3200 10R2021 4690.00N8732A-831-230 10 330 3300 10R2022 4690.00N8732A-861-208 10 330 3300 10R2023 4690.00N8733A-831-230 15 220 3300 10R2024 4690.00N8733A-861-208 15 220 3300 10R2025 4690.00N8734A-831-230 20 165 3300 10R2026 4690.00N8734A-861-208 20 165 3300 10R2027 4690.00N8735A-831-230 30 110 3300 10R2028 4690.00N8735A-861-208 30 110 3300 10R2029 4690.00N8736A-831-230 40 85 3400 10R2030 4690.00N8736A-861-208 40 85 3400 10R2031 4690.00N8737A-831-230 60 55 3300 10R2032 4690.00N8737A-861-208 60 55 3300 10R2033 4690.00N8738A-831-230 80 42 3360 10R2034 4690.00N8738A-861-208 80 42 3360 10R2035 4690.00N8739A-831-230 100 33 3300 10R2036 4690.00N8739A-861-208 100 33 3300 10R2037 4690.00N8740A-831-230 150 22 3300 10R2038 4690.00N8740A-861-208 150 22 3300 10R2039 4690.00N8741A-831-230 300 11 3300 10R2040 4690.00N8741A-861-208 300 11 3300 10R2041 4690.00

Mfg. Part No. Description Stock No. Price Each66000A Modular System Mainframe 95H9246 2273.0066101A Module Power Supply 8V, 16A 95H9249 2087.0066102A Module Power Supply 20V,7.5A 95H9250 2087.0066103A Module Power Supply 35V, 4.5A 95H9251 2087.0066104A Module Power Supply 60 V, 2.5 A 95H9252 2087.0066105A Module Power Supply 120V, 1.25A 95H9253 2087.0066106A Module Power Supply 200V, 0.75A 95H9254 2087.00


(V)Output Current

(A) Max. Power Stock No. Price EachN8742A-831-230 600 5.5 3300 10R2042 4690.00N8742A-861-208 600 5.5 3300 10R2043 4690.00

5kW

N8754A-861-208 20 250 5000 10R2044 6500.00N8755A-861-208 30 170 5100 10R2045 6500.00N8756A-861-208 40 125 5000 10R2046 6100.00N8757A-861-208 60 85 5100 10R2047 6100.00N8758A-861-208 80 65 5200 10R2048 6100.00N8759A-861-208 100 50 5000 10R2049 6100.00N8760A-861-208 150 34 5100 10R2050 6100.00N8761A-861-208 300 17 5100 10R2051 6100.00N8762A-861-208 600 8.5 5100 10R2052 6100.00

(78718)

(148557)

E3600 SERIES SINGLE, DUAL ANDTRIPLE OUTPUT DC POWER SUPPLIES

66000 MODULAR POWER SYSTEM 1200WPER MAINFRAME GPIB FEATURES

Mfg. Part No. Description Stock No. Price EachU8001A 90W, 3A/30V Single-Output DC Power Supply 14N3964 307.00U8002A 150W, 5A/30V Single-Output DC Power Supply 14N3967 385.00

ACCESSORIES

U8001A-1CM Rack Mount Kit for U8001A Power Supply 14N3966 61.52U8002A-1CM Rack Mount Kit for U8002A Power Supply 14N3969 61.523600A-100 Test Lead Kit 14N3970 15.58U8001A-ABA User’s and Service Guide in English for U8001A Power Supply 14N3965 15.63U8002A-ABA English Users & Service Guide for Agilent U8002A DC Power

Supply14N3968 15.63

N8700 SERIES HIGHPOWER DC POWERSUPPLIES

• Greater throughput in less space with theflexible modular power system

• Up to 8 modules in the required high density1200W 66000A mainframe

• Stable, low ripple and noise power source• Sequence up to 20 voltage and current setting

per output• Easy to reconfigure with front loading modules

(119548)

• Single, dual or triple output• 30W to 60W output power• Constant-Current (CC) and Constant-Voltage (CV) Modes• Linear Power• 10-Turn Voltage and Current Controls• Digital Voltage and Current Meters • Low Noise and Excellent Regulations• Dual range models available

• Small, high density 2 U high, 19 ″ widepackage

• 3.3kW and 5kW power families• Outputs up to 600V and up to 400A• Parallel multiple units for higher power• Built-in voltage and current

measurement • LAN, USB, and GPIB interfaces

standard.• Full protection from over-voltage and

over-current• Flexible AC input voltage options

The 66000 series modular power system simplifies test-system assembly, cabling, programming, de-bugging, andoperation. It is ideal for ATE and production test envi-ronments for supplying bias power and stimulus to sub-assemblies and final products.

U8000 SERIESSINGLE-OUTPUT DCPOWER SUPPLIES

N8700 series single-output programmable DC power supplies consists of 21 models for simple DC power applications.They provide stable output power, built-in voltage and current measurement, and output voltage and current from 8V to600V and 5.5A to 400A. N8700 series offers many system-ready features like multiple standard I/O interfaces tosimplify and accelerate test-system development. Its air vents are in the front and rear, so you can stack otherinstruments directly above or below to save valuable rack space.

Nine models available, up to 120V, 6A. Isolation, 240VDC. Mfg. part nos. E3610A, E3611A, and E3612A features: dualrange, 10-turn pots, constant-voltage (CV), constant-current (CC) modes. Mfg. part nos. E3614A, E3615A, E3616A,and E3617A features: adjustable overvoltage protection, voltage programming, remote sense, rear outputs, 10-turnpots, CV and CC modes, resistance programming; multiple supplies can be connected for tracking or higher power. Mfg.part no. E3620A features: dual outputs isolated, 10-turn pots, and CV and CL modes. Mfg. part no. E3630A features:tracking, common outputs, and CV and CL modes. Transient response time: <50µs following change in output currentfrom full load to half load for output to recover to within 10mV (mfg. part nos. E3610A, E3611A, and E3612A) and 15mV(mfg. part nos. E3614A, E3615A, E3616A, E3617A, E3620A, and E3630A). Common mode current: <1µArms (mfg.part nos. E3620A and E3630A only). Number of outputs: 1 (except mfg. part no. E3620A has 2 outputs; mfg. part no.E3630A has 3 outputs). Dual range models available, go online or call Newark.

• 3A/90W or 5A/150W single-output, non-programmable models• Easy-to-use front panel operation• Fast 50µsec transient response reduces test time• Excellent load and line regulation — Constant Voltage: <0.01% +2mV, Constant Current: <0.02% +2mA• Low output noise: 1mVrms, 3mArms (20Hz to 20MHz)• Over-voltage and over-current protection prevents damage to DUT• LCD display with backlight on/off option• Standby output for safety• Save-and-Recall memory function• Keypad locking prevents accidental front panel usage• Physical lock mechanism provides secure instrument storage• CSA certified, CE complaint

3.3kW

E3610A, E3620A and E3630A

U8000 series single-output, non-programmable 30V DC power supplies includes the functionality and features typicallyfound in costly programmable supplies. These benchtop units deliver excellent value by providing reliable DC power,efficient set-up capabilities and important security benefits. Ideal for a variety of applications in electronics manu-facturing and in educational lab settings. Supplies can be easily integrate into a test rack with rack mount kits; orderedseparately below. Both models come complete with product reference CD, power cord, and certificate of calibration .Order test lead set and the comprehensive user’s and service guide separately below.


2178

9


DC POWER SUPPLIES


E3600 SERIES SINGLE, DUAL AND TRIPLE OUTPUT DC POWERSUPPLIES (CONT.)

(148838)

SINGLE-OUTPUTMfg. Part No. E3640A E3641A E3642A E3643A E3644A E3645A

Outputs 1 1 1 1 1 1Output Max V/I

8V/3A or20V/1.5A

35V/0.8A or60V/0.5A

8V/5A or20V/2.5A

35V/1.4A or60V/0.8A

8V/8A or 20V/4A

35V/2.2Aor 60V/1.3A

Power Rating

30W 30W 50W 50W 80W 80W

Ripple and Noise

Less Than 5mVpp/0.5mVrms

Less Than 8mVpp/1mVrms





Mfg. Part No. Description Stock No. Price EachE3631A 80W Triple-Output Power Supply 91F3058 1294.00E3632A 105/120W Single-Output Power Supply 91F3059 1131.00E3633A 160/200W Single-Output Power Supply 95H9602 1368.00E3634A 175/200W Single-Output Power Supply 95H9603 1368.00


E3631A CALIBRATED 80W Triple-Output Power Supply 60K7372 1379.00E3632A CALIBRATED 105/120W Single-Output Power Supply 60K7373 1216.00E3633A CALIBRATED 160/200W Single-Output Power Supply 60K7374 1453.00E3634A CALIBRATED 175/200W Single-Output Power Supply 60K7375 1453.00

Mfg. Part No.Output Ripple and Noise

VoltageMeter Resolution

Volts Amps Volts AmpsE3615A 20V 3A <200µVrms, <1mVp-p 10mV (0-20V),

100mV (>20V)10mA

E3616A 35V 1.7A <200µVrms, <1mVp-p 10mV (0-20V),100mV (>20V)

1mA

E3617A 60V 1A <200µVrms, <1mVp-p 10mV (0-20V),100mV (>20V)

1mA

E3620A 25V25V

1A1A

<350µVrms, <1.5mVp-p 10mV (0-20V),100mV (>20V)

1mA

E3630A +6V+20V–20V

2.5A0.5A0.5A

<350µVrms, <1.5mVp-p 10mV 10mA

DUAL-OUTPUTMfg. Part No. E3646A E3647A E3648A E3649A

Outputs 2 2 2 2Output Max V/I

8V/3A or 20V/1.5A

35V/0.8A or 60V/0.5A

8V/5A or 20V/2.5A

35V/1.4A or 60V/0.8A

Power Rating

60W 60W 100W 100W

Rippleand Noise

<5mVpp/0.5mV rms

<8mVpp/1mV rms

<5mVpp/0.5mV rms

<8mVpp/1mV rms

(15237)

Mfg. Part No. Description Stock No. Price EachE3610A Single-Output Power Supply 91F3049 451.00E3611A Single-Output Power Supply 91F3050 451.00E3612A Single-Output Power Supply 91F3051 451.00E3614A Single-Output Power Supply 91F3052 707.00E3615A Single-Output Power Supply 91F3053 707.00E3616A Single-Output Power Supply 91F3054 707.00E3617A Single-Output Power Supply 91F3055 707.00E3620A Dual-Output Power Supply 91F3056 615.00E3630A Triple-Output Power Supply 91F3057 615.00


E3610A CALIBRATED Single-Output Power Supply 60K7366 536.00E3611A CALIBRATED Single-Output Power Supply 60K7367 536.00E3612A CALIBRATED Single-Output Power Supply 60K7368 536.00E3615A CALIBRATED Single-Output Power Supply 60K7369 792.00E3620A CALIBRATED Dual-Output Power Supply 60K7370 700.00E3630A CALIBRATED Triple-Output Power Supply 60K7371 700.00

Mfg. Part No. Stock No. Price EachE3640A 18C1837 739.00E3641A 18C1838 739.00E3642A 18C1839 788.00E3643A 18C1840 788.00E3644A 18C1841 962.00E3645A 18C1842 962.00

DUAL-OUTPUT

E3646A 13C1023 1033.00E3647A 18C1843 1033.00E3648A 18C1844 1235.00E3649A 18C1845 1235.00

(15234)

E3630A SERIES SINGLE- AND TRIPLE-OUTPUT PROGRAMMABLE DC POWERSUPPLIES

SPECIFICATIONS:Input Voltage: 90-264VACInput Frequency: 47-63HzRipple & Noise: <30mVppLine Regulation: <4mV

Mfg. Part No. Stock No. Price EachE3640A CALIBRATED 60K7376 824.00E3641A CALIBRATED 60K7377 824.00E3642A CALIBRATED 60K7378 873.00E3644A CALIBRATED 60K7379 1047.00

CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT DUAL-OUTPUT

E3646A CALIBRATED 60K7380 1118.00E3648A CALIBRATED 60K7381 1320.00E3649A CALIBRATED 60K7382 1320.00

All models operate in both constant voltage and constant current modes. Single output models have overvoltage andovercurrent protection. Up to 3 complete power supply settings can be stored and recalled from the internal none volatilememory.

E3631A:

(61083)

80W SWITCHING MODE DCPOWER SUPPLY

• Triple-Output, 80 watts total• Dual +/-25V, 1A outputs, one isolated 0∼6V, 5A output• Ripple and noise <350µ Vrms / 2mV p-p

E3640A SERIES SINGLE ANDDUAL-OUTPUT PROGRAMMABLEDC POWER SUPPLIES

• Single- and Dual-Output• 30W to 100W Output Power• Front and Rear Output Terminals• Over Voltage Protection• Remote Senses• GPIB and RS232 as Standard

E3632A:

• Constant voltage or current• 3 selectable ranges:

0 to 16V/0 to 5A0 to 27V/0 to 3A0 to 36V/0 to 2.2A

• 4-Digit LED displays• Front/Rear output terminals• Lightweight for easy portability

The E364XA series of programmable DC power supplies provide great performance. CVCI mode. All types deliver cleanpower, dependable regulation, and fast transient response. Calibration with printed certification and data report isavailable on all models, go online or call Newark.

• Single-Output 120 watts total• 0∼15V, 7A or 0∼30V, 4A• Ripple and noise <350µ Vrms / 2mV p-p

Mfg. part no. 382260 3-in-1 power supply features remotesensing for accurate applied voltage at load point. Compact slimtower housing is ideal for tight work bench. Comes completewith AC power cord.

SINGLE-OUTPUT

E3633A:

CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT SINGLE-OUTPUT

• Single-Output 200 watts total• 0∼8V, 20A or 0∼20V, 10A• Ripple and noise <350µ Vrms / 3m V p-p

3634A:• Single-Output 200 watts total• 0∼25V, 7A or 0∼50V, 4A• Ripple and noise <500µ Vrms / 3mV p-p

• 80W to 200W output power• Built-in RS-232 and GPIB interface• 0.01% load and line regulation



9


DC POWER SUPPLIES


SWITCH MODE VARIABLE POWER SUPPLIES (CONT.)80W SWITCHING MODE DC POWER SUPPLY (CONT.)

Features

Voltage regulation

Mfg. Part No. 72-8340 72-8345 72-8350Load (from 10∼100%) 50mV 50mV 70mVLine (from 90∼132VAC) 20mV 20mV 20mVRipple and noise (rms) 5mV 5mV 5mVRipple and noise (p-p) 50mV 30mV 30mV

Current Regulation

Load (from 10∼100%) 20mA 20mA 20mALine (from 90∼132VAC) 20mA 20mA 20mARipple and noise (p-p) 20mA 20mA 20mA

Dimensions 6″ (H) x 2.8″ (W) x 9.8″ (D)Weight 4.4 lbs.

Mfg. Part No. 72-8340 72-8345 72-8350Voltage range 1.0∼60.0VDC 1.0∼36.0VDC 1.0∼20.0VDCCurrent range 0∼1.6A 0∼3A 0∼5A

• Low Ripple• Variable Voltage and Current• Tight Line and Load Regulation• 115/230V, 50-60 Hz Operation• Constant Current or Constant Voltage

Operation• Overload and Reverse Polarity

Protection

Mfg. Part No. Volts Stock No.Price Each

1-99972-8350 Switch Mode Variable, 1-20VDC, 0-5A 01N4886 179.0072-8345 Switch Mode Variable, 1-36VDC, 0-3A 01N4887 179.0072-8340 Switch Mode Variable, 1-60VDC, 0-1.6A 01N4888 179.00

Mfg. Part No.

CH1 and CH2 CH3 CH4

RemoteSense Display Stock No.

Price Each

Volt-age

Cur-rent(A)

Volt-age

Cur-rent(A)

Volt-age

Cur-rent(A)

72-7245 0-30 0-3 Digital 22H6396 329.0072-6905 0-3 3-6 1 Fixed 8-15 1 Fixed Digital 36C3018 411.0072-6856

0-35

- 3.3/5Fixed

5 Fixed Digital 19C7723 766.92

72-6855 0-4 Digital 19C7719 683.7672-6854 0-10 X Digital 19C7715 1155.0072-7570 0-42 0-20 X Digital 01J2673 1596.3272-6909 0-75 0-2 Digital 01H9897 822.36

(114923)

Mfg. Part No. Stock No. Price Each72-7245 CALIBRATED W/DATA 25H6718 404.0072-6905 CALIBRATED W/DATA 25H6710 486.0072-6856 CALIBRATED W/DATA 36C3007 851.9272-6855 CALIBRATED W/DATA 36C3006 768.7672-6854 CALIBRATED W/DATA 36C3005 1240.0072-7570 CALIBRATED W/DATA 09J4722 1671.3272-6909 CALIBRATED W/DATA 25H6714 897.36

SPECIFICATIONS:Load Regulation: <20mVDisplay: Dual 4-digit LED displaysDimensions: 13 x 5 x 2″ (330 x 127 x 53.5mm)Weight: 4.2 lbs. (1.9kg)

NON-CALIBRATED

(65077)

Mfg. Part No.

Output 1 Output 2 Output 3 OutputPower

(W) Stock No.PriceEachV A V A V A

382260 16.4 5.1 27.6 3.1 36.8 2.3 80 61M1150 259.99

SWITCH MODE VARIABLEPOWER SUPPLIES

Mfg. Part No. Volts AmpsLineReg

LoadReg Ripple

RemoteSense Meters Stock No. Price Each

72-7685 12 30 5 mV 5 mV 5 mV Yes Digital 96H1236 484.0072-6535 18 3 0.1% 0.01% 0.5 mV No Digital 84N1414 242.5272-6852 18 20 0.01% 0.01% 1 mV Yes Digital 19C7705 987.0072-7690 18 20 5 mV 5 mV 5 mV Yes Digital 96H1237 484.0072-7700 24 15 5 mV 5 mV 5 mV Yes Digital 96H1239 484.00

SINGLE OUTPUT LABORATORYPOWER SUPPLIES

MULTIPLE-OUTPUT BENCHTOPLABORATORY POWER SUPPLIES

(148533)

Features

Mfg. Part No.

OutputVoltage

(V)

OutputCurrent

(A)Power

(W) Stock No. Price Each ZUP633/U 0-6 0-33 198 04M4631 1119.41 ZUP666/U 0-6 0-66 396 04M4632 1387.60 ZUP6132/U 0-6 0-132 792 26K5930 2089.57 ZUP1020/U 0-10 0-20 200 26K5917 1025.10 ZUP1040/U 0-10 0-40 400 10M5304 1476.45 ZUP1080/U 0-10 0-80 800 26K5919 2089.57 ZUP2010/U 0-20 0-10 200 26K5922 1099.20 ZUP2020/U 0-20 0-20 400 26K5923 1476.45 ZUP2040/U 0-20 0-40 800 04M4628 2089.57 ZUP366/U 0-36 0-6 216 04M4630 1119.41 ZUP3612/U 0-36 0-12 432 04M4629 1476.45 ZUP3624/U 0-36 0-24 864 26K5926 2089.57

ZUP603.5/U 0-60 0-3.5 210 13C2642 1119.41 ZUP607/U 0-60 0-7 420 26K5929 1476.45 ZUP6014/U 0-60 0-14 840 26K5928 2089.57 ZUP802.5/U 0-80 0-2.5 200 04M4633 1119.41 ZUP805/U 0-80 0-5 400 04M4634 1352.06 ZUP1201.8/U 0-120 0-1.8 216 26K5920 1066.36 ZUP1203.6/U 0-120 0-3.6 432 04M4627 1476.45


1-4 NL100 Rackmount Kit 30C9858 385.92

NL-101 Blank Panel 29C0106 36.18ZUP200/400/L Front Panel Terminals for Lambda Power Supply 87H5105 169.74

ZUP/NC401 RS-232 Cable Assembly 27M9670 39.51 ZUP/NC404 RS-485 Cable Assembly 27M9671 43.90

• Overload and reverse polarity protection• 115/230V, 50/60Hz

• Backlit four digit LCD display• Simultaneous display of voltage and current• Auto selecting constant voltage (CV) and

constant current (CC) modes• Ultra quiet convection cooling• Short circuit, overload, over voltage and

thermal protection• 84% efficiency at maximum output• RoHs compliant

(84544)

• Line and load regulation typical 0.01%• Ripple typical 1mV rms• Constant Current or Constant Voltage operation

Specifications

ZUP SERIES PROGRAMMABLEDC POWER SUPPLIES

Precision adjustable supplies are ideal for test, measurement and service applications where tight voltage and currentregulation are critical. Highly efficient switch mode design delivers outstanding performance from an extremelycompact footprint. Unique separate output ON/OFF control allows voltage and current setting, with the supply outputturned off.

All the Tenma® bench power supplies listed in the first table below are available with a 1-year calibration certificate.

72-8350

• Built-in RS232 and RS485 interface with optional GPIB• Constant voltage• Constant current• Embedded microprocessor controller• Digital encoder knob• Software calibration• Last setting memory• Parallel operation (Master/Slave) active current sharing• External voltage or resistance programming• Voltage up to 120V• Current up to 132A• Universal input voltage, 85-265VAC• 19″ rack mountable ATE and OEM• Worldwide safety agency approvals• CD Mark for LVD and EMC regulations

72-6854, 72-6854C


Features:

72-7245

ZUP SERIES ACCESSORIES

Zero-up series programmable DC power supplies offers 200W, 400W or 800Wrated output power.


2180

9


DC POWER SUPPLIES


HIGH POWER PROGRAMMABLE LABORATORY DCPOWER SUPPLIES

SINGLE OUTPUT LABORATORY POWER SUPPLIES (CONT.)

(84363)

• Fully programmable with bus readback of V and I• GPIB (.2) & addressable RS232 (ARC) interfaces• Watts display, non-volatile storage of 25 settings• Keyboard setting of all parameters• Rotary and delta (step) control of V and I• High setting resolution, remote sense terminals• Comprehensive protection including variable OVP trip• CV & CI operation with automatic crossover• Bench or rack mounting, front & rear terminals• Line regulation: O/P change for 10% mains change

<0.1% of Max output• Load regulation: O/P change for 90% load change

<0.01% of Max. output• Ripple and noise: <1mV RMS

Single Output Battery EliminatorsStock No.

Price EachMfg. Part No. Volts Amps Meters 1-2

1680 13.8 4 None 52F555 61.601682A 13.8 12 None 36C2946 142.241686A 3-14 12 LED 36C2947 235.201688A 3-14 20 LED 36C2948 357.281692 3-15 40 Digital 22C6851 319.00

Load and Load Regulation ≤0.02% + 5mVRipple and Noise ≤1mV RMSPower Requirements 100VAC 60HzDimensions 4-3/4(H) x 8 (W) x 113⁄4″(D)

Load Regulation ≤15mVLine Regulation ≤10mVRipple and Noise ≤5mVrmsPower Requirements 120VAC 60HzDimensions 43⁄4 (H) x 8 (W) x 10″ (D)Weight 11 lbs.

(85493)

VSP SERIES PROGRAMMABLEPOWER SUPPLIES

Mfg. Part No. Description Stock No. Price Each72-6630 Programmable Power Supply 50N1383 293.55


72-6630 CALIBRATED W/DATA Programmable Power Supply Calibrated w/Data

50N2287 368.55

Mfg. Part No. Description Stock No. Price Each72-6628 Triple-Output DC Power Supply 50N1382 167.0072-6628 CALIBRATED Triple-Output DC Power Supply 66K9651 252.00

72-6851

Mfg. Part No. Volts AmpsLineReg

LoadReg Ripple

RemoteSense Meters Stock No. Price Each

72-6906 30 1 0.01% 0.01% 1 mV No Digital 01H9894 282.0072-2010 30 3 0.1% 0.01% 0.5 mV No Analog 66F3559 203.0472-6610 30 3 0.1% 0.01% 0.5 mV No Analog 50N1371 240.6672-6908 35 5 0.01% 0.01% 2 mV No Digital 01H9896 542.8572-6850 35 10 0.01% 0.01% 1 mV Yes Digital 19C7696 987.0072-7695 36 10 5 mV 5 mV 5 mV Yes Digital 96H1238 499.0072-6910 42 10 0.01% 0.01% 1 mV Yes Digital 01H9898 789.6072-6907 56 1 0.01% 0.01% 1 mV No Digital 01H9895 315.8472-2015 60 1 0.1% 0.01% 0.5mV No Analog 66F3560 205.0672-7705 60 6 5 mV 5 mV 5 mV Yes Digital 96H1240 484.00

CALIBRATED

72-7685CALIBRATEDW/DATA

12 30 5 mV 5 mV 5 mV Yes Digital 02J7825 574.00


18 3 0.1% 0.01% 0.5 mV No Digital 90B8897 317.52


18 20 0.01% 0.01% 1 mV Yes Digital 36C3003 1067.00






30 1 0.01% 0.01% 1 mV No Digital 25H6711 357.00


30 3 0.1% 0.01% 0.5 mV No Analog 50N2214 278.04


30 3 0.1% 0.01% 0.5 mV No Analog 50N2275 315.66


35 5 0.01% 0.01% 2 mV No Digital 25H6713 617.85


35 10 0.01% 0.01% 1 mV Yes Digital 36C3001 1062.00




42 10 0.01% 0.01% 1 mV Yes Digital 25H6715 864.60


56 1 0.01% 0.01% 1 mV No Digital 25H6712 415.84

72-2015CALIBRATED

60 1 0.1% 0.01% 0.5mV No Analog 50N2215 280.06



(49288)

Mfg. Part No. Output Voltage Output Current Stock No. Price Each72-6851 0-35V 0-10A 19C7699 1408.1972-6853 0-18V 0-20A 19C7711 1078.70


72-6851 CALIBRATED 0-35V 0-10A 36C3002 1483.1972-6853 CALIBRATED W/DATA 0-18V 0-20A 36C3004 1153.70

HIGH CURRENT DC POWER SUPPLIES

(49284)

• 1.2 kilowatts at 20V, 40V, 60V and 120V output voltages• Compact 1U (1.75 x 19″) rack mountable cabinet• Up to nine units can be cascaded, for more than 10 kilowatts of DC power• Front-to-back air flow allows full power operation without space between supplies• Stackable

(84792)

• Adjustable 0 - 30VDC Outputs 3A• Fixed 5V @ 500mA Continuous, 1A Max• Fixed 12V @ 500mA Continuous, 1A Max• Constant Current or Constant Voltage

Operation• Overload and Short Circuit Protection• 1-Year Warranty• CE Compliant

• Fixed or Variable Output• Designed for Continuous Duty• Reliable

A single output programmable power supply, with nine user-programmable preset outputs, extra large 3-digit LEDdisplay, low noise and ripple. Order mfg. part no. 72-6630C with calibrated certificate separately below.

Modern switch mode technology produces high-power and low-noise switching supplies that cost around 25 percentless than linear supplies with the same power. The VSP series offers precise voltage control via three methods: Manualtuning utilizing front panel mounted Ten-tern potentiometers and three-digit meters, remote control from an RS-232 orGPIB interface and analog remote sensing automatically maintains desired voltage at load level of power cable.

• Low Ripple• Tight Regulation• Ideal for Substituting for Car Batteries

A triple-output power supply, with large, clear LCD digital voltand amp meters. High-current binding posts for main output.

SPECIFICATIONS

SPECIFICATIONS

1686A

72-6630 PROGRAMMABLEPOWER SUPPLY

1692

72-6628 TRIPLE-OUTPUTDC POWER SUPPLY

• Regulated 0 - 30VDC Outputs @ 3A• Digital Keypad Entry for Easy Operation• USB PC Interface• Instant Recall of Preset Output• Includes Manual, Windows and DOS Software

and Interface Cable• CE Compliant



9


DC POWER SUPPLIES


SINGLE AND TRIPLE OUTPUT DC LAB POWER SUPPLIES (CONT.)VSP SERIES PROGRAMMABLE POWER SUPPLIES (CONT.)

Mfg. Part No.Output(V/A) Stock No. Price Each

VSP12010GPIB 120/10 97J7632 1995.00RS232 INTERFACE

VSP2050 20/50 61J4143 1775.00VSP4030 40/30 61J4139 1775.00VSP6020 60/20 61J4141 1775.00VSP12010 120/10 97J7631 1775.00


1-21689 Regulated Power Supply w/Analog Display 95B1294 327.451690 Regulated Power Supply w/Digital Display 95B1297 410.70


Output Current Stock No.

Price Each1-2

1790 0-32V 20A 48F5829 1581.751791 0-64V 10A 48F5830 1609.501794 0-32V 30A 37K8733 1750.001795 0-64V 15A 37K8736 1750.001796 0-16V 50A 57K8329 1750.00

Mfg. Part No. Volts Amps Stock No.PriceEach

9120A 32 3 60M9899 709.009121A 20 5 55M8721 715.009122A 60 2.5 78M8275 779.399123A 30 5 78M8277 842.679124 72 1.2 85M2252 715.00

Mfg. Part No.

Output Voltage

(V)

Output Current

(A)LineReg

LoadReg Stock No. Price Each

1785B 0-18 0-5 < 0.1% + 3mV ≤ 0.01% + 3mV 97J8008 390.001786B 0-32 0-3 < 0.1% + 3mV ≤ 0.01% + 3mV 97J8009 390.001787B 0-72 0-1.5 < 0.1% + 3mV ≤ 0.01% + 3mV 97J8010 390.001788 0-32 0-6 < 0.1% + 3mV ≤ 0.02% + 5mV 97J8011 525.00

(48683)

Mfg. Part No.Volts(Ch 1)

Amps(Ch 1)

Volts(Ch 2)

Amps(Ch 2)

Volts(Ch 3)

Amps(Ch 3) Stock No.

PriceEach

9130 30 3 30 3 5 3 60M9900 895.00

(84503)

(48676)

(48675)

HIGH-CURRENT POWER SUPPLIES

(84557)

Mfg. Part No.Output 1 Output 2 Output 3

Meters Stock No. Price EachVolts Amps Volts Amps Volts Amps1710A 30 1 ... ... ... ... LED 81C9151 278.881730A 30 3 ... ... ... ... LED 93C9451 365.191735A 30 3 ... ... ... ... Digital 74C1209 458.081743B 35 6 ... ... ... ... Digital 41K8779 539.001711A 60 2 ... ... ... ... LED 93C9449 365.191715A 60 2 ... ... ... ... Digital 93C9450 453.99

Voltage CurrentOutput Ratings 0-60V 0-5ALoad Regulation Less than or equal to 0.01% + 3mV Less than or equal to 0.01% + 3mALine Regulation Less than or equal to 0.01% + 3mV Less than or equal to 0.1% + 2mASetting Accuracy Less than or equal to 0.05% + 10mV Less than or equal to 0.2% + 2mADisplay Accuracy Less than or equal to 0.05% + 10mV Less than or equal to 0.1% + 2mARipple Less than or equal to 2.0mVrms Less than or equal to 5mArms

PROGRAMMABLE POWER SUPPLIES

REGULATED DC POWER SUPPLIES

Mfg. Part No.Output 1 Output 2 Output 3

Meters Stock No. Price EachVolts Amps Volts Amps Volts Amps1670A 30 3 12 0.5 5 0.5 Digital 36C2945 224.001651A 24 3 24 0.5 5 4 LED 22C6850 445.971760A 30 2 30 2 4.5-6 5 Digital 93C9454 731.491761 35 3 35 3 6.5-2 5 LED 73C7912 699.001746B 16 10 ... ... ... ... LED 48K7299 539.00

PROGRAMMABLE DC POWER SUPPLIES

Programmable DC power supplies with sixteen user programmableoutputs, controllable output On/Off switch, 10mV/10mA display resolutionand closed case calibration. Ripple and Noise: 1mV. Comes complete withinterface cable and software.

(5300)

Designed to give excellent regulation even at fullload. Current can be set with the push of a switchwithout turning off the entire supply. LED metering.Low ripple and noise. Remote voltage sense. Outputstandby. Constant voltage/constant current oper-ation, facility for presetting the output voltage andmax.

Voltage CurrentOutput Ratings 1-36 VDC 0-3ALoad Regulation From 10% to 100% ± 50 mV From 10% to 100% ± 20 mALine Regulation From min to max ± 20 mV From min to max ± 20 mA

These regulated 28A DC power supplies offers multiple DCoutput terminals. 2 pairs of 3A, snap-in DC connectors areeasily accessible on the front panel, and a set of high currentconnections mounted onto the rear panel. Both provide over-load protection, high RFI stability and continuously maximumcurrent output. Both feature 1VDC to 15VDC variable output.28A output @ 13.5VDC. Mfg. part no. 1689 features analogmetering; mfg. part no. 1690 features digital LED metering.

1785B

1690

SINGLE AND TRIPLE OUTPUT DC LABPOWER SUPPLIES

1790

• Excellent display resolution• Low ripple and low noise• Outstanding temperature stability• Fast transient resonse time (<20ms)• SCPI Compatible• Front and rear output terminals• Closed case calibration

GPIB INTERFACE

1760A, 1761

912XA series are laboratory grade programmable DC Power Supplies providing great performance and features notfound in other supplies in this price category. These power supplies are designed to meet the needs of today’sapplications in R&D design verification, production testing or university labs that require clean and reliable power, highresolution/accuracy and fast transient response time.

9130 series triple output fully programmable power supplies deliver 0-30V/0-3A on 2 outputs and 0-5V/0-3A on 1output. Each output is fully floating and can be adjusted independently or connected in series or parallel to producehigher voltages or currents.

1735A and 1715A

MULTI-RANGEPOWER SUPPLY

1651A

Mfg. No. 9110 automatically recalculates voltage/current for each setting, forming a constant hyperbolic-shapedboundary, providing 100W output power in any volt/amp combination within the rated voltage (60V) and current (5A).Includes line cord, manual. Mfg. No. 1550 has a USB charging port located on the front of the panel allowing the user tocharge a cell phone or MP3 player. The 1550 is ideally used for any bench laboratoriees, work shops and schools wherebench space is limited.

All power supplies are designed for continuous duty at maximum rated output. The designs include reverse polarityprotection, thermal protection, short-circuit protection, and current limiting. Regulation is tight and ripple is lowregardless of variations in the load or the input AC line voltage. All units have constant voltage and constant currentmodes.

9110

• Digitally controlled, mixed mode linear/switching DC power supply

• 10mV/1mA resolution over full range• High reliability due to over current/

voltage/temperature protection• Store and recall 4x100 groups of preset

volt/amp values• Output On/Off control• Compact design (1550 only)• USB charging port (1550 only)

SPECIFICATIONS FOR 9110

1550

SPECIFICATIONS FOR 1550

ND3% BASE1 XXXX3708-2182-1-82 TSQ: 3001 CMS: CMS- USM TS host OP: NN COMP: 28-07-09 Hour: 08:35 TS: TS date TS time

2182

9


DC POWER SUPPLIES • AC POWER SUPPLIES


MULTI-RANGE POWER SUPPLY (CONT.)

Output Capacity 500 VAOutput Voltage 110Output Current 0∼150 V, 4.2 A, 0∼300 V, 2.1 AFrequencyWaveform Sine Wave Less Than or Equal to 0.5% THD (resistance load)Line Voltage Regulation ±0.1%Load Regulation ±0.5% + 0.1 V

Measurements

Frequency Counter 0 to 999.9HzRMS Volt Meter Range: 0 ∼ 380.0 V, Resolution: 0.1 V, Accuracy ± (1%rdg +0.1 V)RMS Amp Meter Range: 0 ∼ 2.0 A, Resolution: 1.0 mA, Accuracy ± (1%rdg +5 mA), Range: 1.8 ∼

35.0 A, Resolution: 0.01 A, Accuracy ± (1%rdg +20 mA)Wattage Meter Range: 0 ∼ 360.0 W, Resolution: 0.1 W, Accuracy ± (1.5%rdg +0.5 W), Range:

320 ∼ 350.0 W, Resolution: 1 W, Accuracy ± (1.5%rdg +1 W)Power Factor Meter Range: 0 ∼ 1.000, Resolution: 0.001, Accuracy ± (2.0%rdg +0.002)Power Source 115 - 230Dimensions 430 W x 137 H x 500mm DWeight 25 Kg

Mfg. Part No. 72-1097 72-1098Input Voltage 100∼127VACOutput Voltage 145VAC (with 110VAC input)Max Output Current 3.5A 7ALine Fuse (included) 6A 10AOutput Fuse (included) 5A 9AOutput Outlets One TwoDimensions (H x W x D) 5-3/4″ x 9-1/8″ x 9″ 6-1/8″ x 11-7/8″ x 10-1/4″Weight 13-1/4 lbs. 17-3/4 lbs

Mfg. Part No. 72-8140 72-8141 72-8142 72-8143 72-8144Continuous 3A 6A 10A 15A 20ASurge 5A 8A 12A 17A 22ADimensions(H x W x D)

3-1/4″ x 4-1/2″ x 7″ 4-3/8″ x 5-1/2″ x 9-1/4″ 4-3/4″ x 8″ x 10-1/4″

Line/load regulation 1.5%Input voltage 110-127VAC, 60Hz


1-972-110 10A Variable Autotransformer 66F3591 146.00

Mfg. Part No. Description Stock No. Price Each72-7675 500 V AC Source 96H1234 1272.60

Mfg. Part No.ICS*

(Amps)Cont. Duty

(Amps)Dimensions (in.) Wt.

(lbs.) Stock No.Price Each

H W D 1-9PR-3. 3 2 3 4.5 7.5 4 50F5009 41.40

PR3UL 3 3 4.25 3 7.5 4 46F2622 64.40PR-4.5. 4.5 3 3.25 3 8.25 5 50F5008 48.76

PR-7 7 5 3.75 6.5 7.5 7 46F2623 65.32PR-10. 10 7.5 4.5 6.75 7.75 10 46F2624 97.52

PR12 12 9.5 4.5 6.75 7.75 11 92F3245 104.88PR-15. 15 12 4.5 6 10 13 46F2625 149.04PR20. 20 16 4.5 6 10 15 92F3246 161.92PR-25. 25 20 6.75 6.25 10.25 19 46F2626 209.76PR30 30 24 6.75 6.25 10.25 21 92F3247 173.00PR-40. 40 32 6.75 10.5 11.5 27 46F2627 270.48

PR50 50 40 6.75 10.5 11.5 30 92F3248 311.88PR-60. 60 48 6.75 10.5 11.5 33 89F683 367.08

(3863)

(78386)

Mfg. Part No. Output Current Metering Stock No.Price Each

1-21655A 4A Peak, 3A Cont 41⁄2″ Analog 94B2755 598.291653A 3A Peak, 2A Cont 31⁄2″ Analog 88F5023 329.00

Mfg. Part No. Description Stock No. Price 1-99972-1097 Single Outlet 3.5A Isolated Variable AC Power Supply 01N4884 189.0072-1098 Dual Outlet 7A Isolated Variable AC Power Supply 01N4885 319.00

(32185)

Mfg. Part No. Description Stock No. Price 1-99972-8140 13.8VDC, 3A Continuous 01N4881 29.9572-8141 13.8VDC, 6A Continuous 54M4269 37.9572-8142 13.8VDC, 10A Continuous 34M2634 52.9572-8143 13.8VDC, 15A Continuous 01N4882 73.9572-8144 13.8VDC, 20A Continous 01N4883 94.95

10A VARIABLEAUTOTRANSFORMER

AC POWER SOURCE

(114927)

(114926)

PRECISION REGULATED 13.8V DC POWER SUPPLIES

(5397)

Gives you the ability to vary line voltage between 0-130VAC. Ideal for troubleshooting power supplies, regulators, outputsections, etc. Fused design enables user to limit current by changing fuse value (10A maximum). 3-prong grounded cordand socket provide convenience and safety.

• Clean 13.8V DC output (±0.5V)• 120V AC input voltage• Tight line and load regulation• Compact size• Over-current protection• Crowbar over-voltage protection

on models over 15 Amps

Features:

VARIABLE ISOLATED AC POWER SUPPLIES

ISOLATED VARIABLE AC POWER SUPPLY

REGULATED DCPOWER SUPPLIES

Specifications:

These single-output DC power supplies are ideal for use as test bench supplies, or for powering commercial/land-mobile, ham and CB radios, tape players and amplifiers. Designed for reliability and superior performance. All modelshave chassis mount fusing except mfg. part no. PR3, PR3UL, and PR4.5, which have internal fusing.


Output Current Stock No.

Price Each1-2

9110 0-60V 0-5A 60M9898 305.251550 1-36V 0-3A 04P2069 154.29

• Wide Range Variable Output Voltage/Frequency

Variable AC supplies combine the safety benefits of an isolation transformer with the service advantages of a variableautotransformer.

Features

1653A

• Input 120VAC, 60Hz• Output 0∼130VAC• Current: 10A 1.3KVA• Fuse 10A AGC (Included)• Non-Isolated• 90 day Warranty

• Provides isolation from the AC line when servicing “hot”chassis equipment

• Protects AC powered test equipment• Variable 0-145VAC output• Safely troubleshoot power supplies, regulators and output

circuits• Minimize damage to associated components• Dual analog meters simultaneously display output voltage and

current• Independent line input and variable output fusesprotect variable

supply and equipment under test• Output fuse may be changed to a lower value• Grounded 6’ line cord and outlets.

Mfg. part nos. 1655A and 1653A have anisolated output voltage of 0-150VAC, and inputvoltage of ±120VAC 10%, 60Hz. Mfg. part no.1655A includes a leakage test and solderingiron temperature control. Displays V, A, VA andleakage. Mfg. part no. 1653A displays voltageand current readings.

(102983)

*Intermittent Communications Service (50% Duty Cycle)

• 4 Sets of ″Save/Recall″ Voltage/Frequency Memory• Output Enable and Disable• Stable and Low-Distortion Output Waveforms• Software Calibration to Ensure Accuracy• Panel-Lock Function to Prevent Accidental Wrong-

Operation• Over Current Protection and Over Temperature

Protection

• Color coded binding post output• Cigarette lighter output (3A, 6A and

10A only)• Lighted rocker switch• Analog current meter• Attached 6’ three prong grounded

power cord

• Frequency, Voltage, Amps, Watts and Power Factor Display

1655A

PR-7

Specifications

Stout power supplies are perfect for cell phones, moderate to high power auto sound products, scanners, CB and hamradio equipment. Rugged design provides up to 30 minutes of full load continuous operation.

Specifications

Mfg. part no. 72-7675 AC power source is ideal for use in applications that require variable voltage and frequency atpower levels up to 500 VA. Simple front panel knobs allow the user to set voltage, frequency and current limit.

Features

72-1025

SPECIFICATIONS:

72-1097



9


ELECTRONIC LOADS


(148843)

Mfg. Part No. Description Stock No. Price EachN3300A 1800W DC Electronic Load Mainframe 95H8001 2372.00N3301A 600W DC Electronic Load Mainframe 95H8002 2016.00N3302A 150W 0-60V 0-30A Module 95H8003 1653.00N3303A 250W 0-240V 0-10A Module 95H8004 2354.00N3304A 300W 0-60V 0-60A Module 95H8005 2044.00N3305A 500W 0-150V 0-60A Module 95H8006 3014.00N3306A 600W 0-60V 0-120A Module 95H8007 2900.00N3307A 250W 0-150V 0-30A Module 95H8008 2194.00

(78752)

Mfg. Part No. Description Stock No. Price Each72-7855 300W Electronic DC Load, 80A, 80V 01J2674 1268.80

Mfg. Part No. Power (W) Voltage (V) Current Stock No. Price Each8540 150 60 1mA - 30A 13P0414 499.00

(79215)

Mfg. Part No. Description Stock No. Price Each72-7680 DC Programmable Electronic Load 96H1235 1234.2072-7680 CALIBRATED W/DATA DC Programmable Electronic Load 02J7824 1329.20

N3300 SERIES DC ELECTRONICLOAD MAINFRAME

(143525)

Features:

ELECTRONIC DC LOAD, 80 AMPS,80 VOLTS, 300 WATTS

(78432)

MFG. PART NO. 8540 150WDC ELECTRONIC LOAD

• Stable operation down to zero volts• GPIB and RS-232 control of current, voltage and resistance• GPIB and RS-232 readback of current, voltage and power• Built-in pulse waveform generation with programmable

amplitude, frequency, duty cycle and slew rate• Full protection from over-current, over-power, over-

temperature and reverse polarity• Electronic calibration• Trigger for external synchronization• Parallel units in constant current mode for higher power• VXI plug & play drivers

Mfg. Part No.Power

(W)Operating Voltage

(0.1 to V )Rated Current

(A) Stock No. Price Each8500 300 120 30 97J9482 1050.008502 300 500 15 41P0141 1150.008510 600 120 120 31M6999 2275.508512 600 500 30 41P0142 2495.008514 1200 120 240 41P0143 2950.008518 1200 60 240 41P0144 3975.008520 2400 120 240 41P0145 5350.008522 2400 500 120 41P0146 6650.008524 5000 60 240 41P0147 10150.008526 5000 500 120 41P0148 12750.00

PROGRAMMABLE ELECTRONIC DC LOAD

• Versatile Solution for Testing DC Power sources• Constant Current, Resistance, Conductance, Voltage and Power

Modes• Wide Voltage and Current Range, 0 to 80V and 0 to 80A• 300 Watts Continuous Dissipation At 40°C• Low Minimum Operating Voltage of Below 1V at 40A• Built-in Transient Generator With Variable Slew• Current Monitor Output for Waveform Viewing• Variable Drop-out Voltage for Battery Testing• Analog Remote Control Capability

Features:

Mfg. part no. 72-7855 compact electronic DC load is ideal for testing a wide variety of DC power sources. It can be usedto investigate the behavior of many different types of power sources such as batteries, solar cells, fuel cells, as well aselectronic power supply units. Mfg. part no. 72-7855 can operate at voltages below 500 mV for currents up to 10A. Thislow operating voltage allows it to be used for many low voltage applications. Includes power lead and instructionmanual.

Mfg. part no. 8540 DC electronic load is a very compact, economically-pricedinstrument that is perfect for use on both the bench and the production floor.Though small in size, it can reliably test a 5V power supply to 30A and do itcontinuously. The load can operate in CC, CV or CR mode while voltage/current orresistance/power values are measured and displayed in real time, making it wellsuited to test a variety of DC power sources. Its performance is comparable tomost full-size bench DC loads, yet it does the job at half the price and takes up halfthe bench space. Unit is supplied with power cord, user manual, and one yearmanufacturer’s warranty. Dimensions: 3.5 W x 6.9H x 11.1″D.

(84537)

Mfg. part no. N3301A and mfg. part no. N3300A electronic load mainframes accept user-installable load modules foreasy system configuration and future reconfiguration. Mfg. part no. N3301A holds up to two mfg. part no. N3302A,mfg. part no. N3303A, and mfg. part no. N3304A load modules, or one mfg. part no. N3305A or mfg. part no.N3306A load module, allowing up to 600 watts of total maximum power. Mfg. part no. N3300A holds up to six mfg.part no. N3302A, mfg. part no. N3303A, mfg. part no. N3304A and mfg. part no. N3307A load modules, or threemfg. part no. N3305A and mfg. part no. N3306A load modules, allowing up to 1800 watts of total maximum power.One GPIB address is all you need for complete control and readback of all load modules within a single mainframe. Thisseries of dc electronic loads provides the fast operation and accurate programming and readback need for high-volumedc power supply test systems.

SPECIFICTIONS

• Operates between 0-60VDC, 1 mA-30A (150W maximum)• Easy operation• Bright, easy-to-read display• Very compact and lightweight• Two current ranges: 3A (1mA resolution) and 30A (10mA resolution)• Constant current (CC), constant resistance (CR) and constant

voltage (CV) operation• Over-current and over-voltage protection• Short mode to simulate shorts• Save up to 400 instrument settings

8500 SERIESPROGRAMMABLE DCELECTRONIC LOADS

• Maximum power: 300 W • Over voltage, over current and over power protection• Current range: 6mA ∼ 60A• Voltage range: 3 ∼ 60V DC• Store up to 100 setups in non-volatile memory• Dynamic operation (CC mode only)• Easy-to-operate and user friendly panel• 3 operating modes: constant voltage(CV), constant current (CC),

constant resistance(CR)Mfg. part no. 72-7680 programmable DC load covers a wide variety of voltage, current and power inputs. Applicationsinclude the burn-in of new devices, power test requirements, dynamic load simulation, fuel cell and generator testingand the manufacture of photovoltaic element manufacturing. Order mfg. part no. 72-7680 with certificate calibrationseparately below.

Affordable full-featured programmable electronic DC loads offer a high degree of accuracy and great display resolution.Ideal for testing and evaluating a variety of DC power sources: DC power supplies, DC-DC converters, batteries, fuel cellsand solar cells. Because they are fully programmable via the RS 232 or optional USB interface they are ideal forautomated test systems. The loads can operate in constant current, constant voltage, constant resistant and constantpower mode while voltage/current or resistant/power values are measured and displayed in real time. Each unit issupplied with power cord, TTL-to-RS232 serial converter, user manual, installation CD with application software, andone year manufacturer’s warranty. Order mfg. part no. IT-E151 rack mount kit and mfg. part no. IT-132 TTL-to-USBserial adapter separately; go online or call.

SPECIFICATIONS:

• Wide operating ranges up to 0 to 500V and 0 to240A (5000W max.)

• Low minimum operating voltage <0.1V• Built-in transient generator• Short circuit test• High-resolution 0.1mA/1mV voltage/current

measurement (Models 8500 and 8502)• Bright, easy-to-read VFD display • Constant current (CC), constant resistance (CR), constant voltage (CV) and constant power (CW) operation • Over-current/over-voltage/over-power/over-temperature protection• Stores up to 25 instrument set-ups• Thermostatically-controlled fan operates quietly• All rack mountable; 300 and 600W models for bench use

600W, 1200W

2400W

5000W

300W


2184

9


SIGNAL & FUNCTION GENERATORS


Bandwidth Phase Noise Output Power Range9kHz to 3GHz CW, 20Hz to 80kHz low frequency (LF) -95 dBc/Hz -127 to +13 dBm

Mfg. Part No. Description Stock No. Price EachSML02 9kHz to 2.2GHz Signal Generator 70J9917 8550.00SMV03 9kHz to 3.3GHz Signal Generator with Vector Modulation 70J9921 16360.00

Mfg. Part No. Bandwidth Accuracy Output Power Range8648B 9 KHz to 2 GHz 1.0 +20dBm to -136dBm8648C 9 KHz to 3.2 GHz 1.5 +20dBm to -136dBm

Mfg. Part No. Bandwidth Accuracy Output Power RangeE4420B 250 kHz to 2 GHz +/- 0.5dB +16dBm to -136dBmE4421B 250 kHz to 3 GHz +/- 0.5dB,+/- 0. dB +16dBm to -136dBmE4422B 250 kHz to 4 GHz +/- 0.5dB,+/- 0.9dB +13dBm to -136dBm

Mfg. Part No. Description Stock No. Price Each8648B Synthesized RF Signal Generator, 9KHz to 2000MHz 96H5787 8623.008648C Synthesized RF Signal Generator, 9KHz to 3200MHz 57J1551 10334.00

Mfg. Part No. Description Stock No. Price EachSMB-B101 9 kHz to 1.1 GHz 07N8511 4885.00SMB-B102 9 kHz to 2.2 GHz 89M4930 6160.00SMB-B103 9 kHz to 3.2 GHz 70M8901 6800.00SMB-B106 9 kHz to 6 GHz 84M7656 14330.00

Mfg. Part No. Description Stock No. Price EachN9310A RF Signal generator 9KHz to 3.0GHz 21M4619 7273.00

Mfg. Part No. Description Stock No. Price EachE4420B 2GHz ESG-A Analog Series RF Signal Generator 09K7588 9726.00E4421B 3GHz ESG-A Analog Series RF Signal Generator 01J3302 11268.00E4422B 4GHz ESG-A Analog Series RF Signal Generator 09K7589 12828.00

(83604)

(142206)

(83789)

Mfg. Part No. Arb27 Buit-In

Waveforms Sine Square Triangle Pulse Ramp Stock No.4007DDS X X X X X 51M40354013DDS X X X X X 54M53864045 X X X X X X 54M53874084 X X X X X X X 54M53884085 X X X X X X X 54M5390

SML AND SMV SERIESSIGNAL GENERATORS

(116500)

(83788)

• AM / FM / φM• Vector Modulation (SMV Only)• Optional Pulse Modulator with Integrated Pulse

Generator• Optional Stereo Coder with Analog and Digital Audio

Inputs • 3-Year Calibration Cycle

8648 SERIES RF SIGNAL GENERATORS

ESG SERIES RF SIGNAL GENERATORS SIGNAL GENERATORS —HIGH ACCURACY/HIGHOUTPUT POWER

9 kHz to 3 GHz RFSIGNAL GENERATOR

• Excellent Performance at an Affordable Price• Frequency Ranges up to 4 GHz• Superior Level Accuracy• Wideband FM, AM, Phase, and Pulse

Modulation• High-Performance Pulse Modulation with On/

Off Ratios of >80 dB (<2 GHz) and >70 dB (>2 GHz)

• Step or List Sweep for Frequency and Power• Built-in Dual Function Generator• GPIB or RS-232 Connectivity, SCPI

Programmability

• 9 kHz to 3 GHz CW output, 20 Hz to 80 kHz lowfrequency (LF) output

• -127 to +13 dBm output level range (maximum +20dBm settable)

• -95 dBc/Hz SSB phase noise • Full sweep function: RF (9 kHz to 3 GHz) /Amplitude

(-127 to +13 dBm), LF (20 Hz to 80 kHz) • Extensive analog modulation: AM, FM, Phase, and

Pulse modulation • Optional IQ modulator, 40 MHz bandwidth • Intuitive GUI offering 11 languages • Standard USB connectivity for test automation and

memory stick support • SCPI command set for remote control

• Low SSB phase noise of typ. –128 dBc (20 kHz carrier offset, 1 GHz carrier frequency, 1 Hz measurementbandwidth)

• Very low SSB phase noise even at low output frequencies (because a new DDS synthesizer is used from 9kHz to 23.4375 MHz instead of a downconverter)

• Nonharmonics suppression of typ. –85 dBc (>10 kHz carrier offset, carrier frequency <1.5 GHz)• Low wideband noise of typ. –152 dBc >10 MHz carrier offset, 1 GHz carrier frequency)• Harmonics of typ. –30 dBc at the maximum specified output power of +18 dBm for high measurement

accuracy

• Simple, Dependable Operation • Remote and Memory Interfaces for Semi-

Automated Testing• Easily Store Test Setups for Quick,

Repeatable Measurements• GPIB Connectivity and SCPI Programming• Optional Pulse Modulation and High Power

(8648B/C/D Models Only)

• 9 kHz to 2.2 GHz/3.3 GHz• SSB Phase Noise: -128 dBc (1 Hz) (at f = 1 GHz, .f

= 20 kHz)• Setting Times <10 ms• High Level Accuracy (deviation 0.5 <dB at levels

>-120 dBm)• High Reliability Through Electronic Attenuator• Digital Frequency and Level Sweep

SMB100A series features high output power as standard. Specified output power of >+18 dBm over the widefrequency range of 1 MHz to 6 GHz. Typical maximum level of +25 dBm (in overrange) over the entire frequency rangeup to 6 GHz provides power reserve to replace external amplifiers. All-purpose RF source with a wide frequency rangefrom 9 kHz to 6 GHz, which covers the main frequency bands for RF applications. Integrated frequency, level, and LFsweeps. All important analog modulations with AM, FM/φM, and pulse modulation supported. Internal LF generatorprovides sinewave signals up to 1 MHz as well as squarewave signals up to 20 kHz. Intuitive user interface withgraphical display of the signal flow facilitates operation. SMB100A series is the ideal signal source for a wide variety ofapplications.

Mfg. part. no. N9310A RF Signal Generator features 9 kHz to 3 GHz with 0.1 Hz resolution and generates CW, analogmodulated (AM/FM/∅M) and pulse modulated signals. Wide bandwidth (40 MHz) IQ modulator enables digitalmodulated signals such as GSM, cdma, OFDM from custom IQ signals. Easy programmable control for automation,either SCPI command or with Virtual Panel software in PC environment. Multi-language UI and USB connectivity for easyoperation and data storage.

DDS FUNCTION GENERATORS

Mfg. part nos. E4420/21/22B ESG-A RF Signal Generators offer excellent performance with superior quality, reliabilityand worldwide support -- at an affordable price. The first in a new generation of signal generators, they provide excellentfrequency and level control, and wide analog modulation capabilities. They are ideally suited to meet the demandingrequirements of today’s receiver test, component test and local oscillator applications.

8648 series of Synthesized RF Signal Generators is ideal for manufacturing high-volume products such as cordlesstelephones, pagers and two-way radios. Designed for semi-automated receiver test, and a variety of general-purposeapplications, the 8648 series starts with the basic capabilities of mfg. part no. 8647A, then enhances residual FM, levelaccuracy and phase noise performance. While maintaining affordability, 8648 series is built to stringent qualitystandards, and the 8648A offers an all-electronic attenuator to promote measurement consistency and repeatability. Inaddition, the simplistic design of the front panel shortens the operator’s learning curve and increases productivity. With300 storage registers and ten user-definable sequences (accessible from a remote keypad), 8648 series easily adaptsto any test procedure.

SML series offers all features required of a state-of-the-art general-purpose signal generator: wide frequency range,large variety of modulation functions and high reliability at an extremely attractive price. Applications are virtuallyunlimited in development, servicing or production where it is used as a flexible signal source in automatic test systems.Accessories supplied: power cable, user manual.SMV series includes a broadband I/Q modulator capable of generating and digital signal in conjunction with an externalI/Q source for automatic test, R&D, and service applications.

SPECIFICATIONS

4007DDS, 4013DDS 4045

4084, 4085, 4086, 4087



9


SIGNAL & FUNCTION GENERATORS


DDS FUNCTION GENERATORS (CONT.)

Mfg. Part No.

No. ofChan-nels

Sine (MHz)

Pulse (MHz)

Arb Sample

Rate Stock No. Price Each81150A-001 1 240 120 2 GSa/s 78M7522 9202.0081150A-002 2 240 120 2 GSa/s 88M2233 13540.00


Waveforms Sine Square Triangle Pulse Ramp Stock No.4084AWG X X X X X X X 54M53894086AWG X X X X X X X 54M5392

Mfg. Part No.

No. ofChan-nels

Sine (MHz)

Pulse (MHz)

Arb Sample

Rate

OutputVoltage

(p-p) Stock No.PriceEach

AFG3011 1 10 5 250 MS/s 20mV-20V 84M7344 3610.00AFG3021B 1 25 12.5 250 MS/s 10mV-10V 47M3599 1950.00AFG3022B 2 25 12.5 250 MS/s 10mV-10V 47M3600 2920.00AFG3101 1 100 50 1 GSPS 20mV-10V 31K8494 3870.00AFG3102 2 100 50 1 GSPS 20mV-10V 31K8495 5110.00AFG3251 1 240 120 2 GSPS 50mV-5V* 31K8496 7270.00AFG3252 2 240 120 2 GSPS 50mV-5V* 31K8497 9660.00


AFG3021B CALIBRATED 1 25 12.5 250 MS/s 10mV-10V 60M5409 2100.00AFG3022B CALIBRATED 2 25 12.5 250 MS/s 10mV-10V 50M9481 3070.00AFG3011 1 10 5 125 MS/s 20mV-10V 84M7344 3610.00AFG3101 CALIBRATED 1 100 50 1 GSPS 20mV-10V 66K7024 4030.00AFG3102 CALIBRATED 2 100 50 1 GSPS 20mV-10V 66K6979 5300.00AFG3252 CALIBRATED 2 240 120 2 GSPS 50mV-5V* 66K6980 9930.00

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachRM3100 Rack Mount Kit 54K5085 319.00013034500 Fuse Adapter, BNC-P-to-BNC-R 58K0057 247.00159045400 3-Pc. Fuse Set, 0.125A, 125V 58K0076 17.00012048200 Cable Assembly, BNC Male-to-BNC Male,

Shielded, 3-ft.11B2576 214.00


1-24084AWG 20MHz Arbitrary/Function Generator 54M5389 1450.404086AWG 80MHz Arbitrary/Function Generator 54M5392 2122.40

Mfg. Part No. Description Stock No. Price Each4040DDS 20 MHz DDS Sweep Function Generator 85M2022 699.00

(113771)

Mfg. Part No. Description Stock No. Price Each33250A/ABA 80 MHz Function/ARB Waveform Generator 27C6564 4620.3833220A 20 MHz Function/ARB Waveform Generator 95H9608 1863.0033210A 10 MHz Function/ARB Waveform Generator 02P0684 1197.0033210A /002 10 MHz Function Generator w/ARB Function 02P0686 1593.0033210A /001 10 MHz Function Generator w/External Ref. IN 02P0685 1593.00OPTION 002 Arbitrary Functionality 02P0683 395.00


33220A CALIBRATED 80 MHz Function/ARB Waveform Generator 60K7398 1963.00ACCESSORIES

5063-9240 Rack Mounting Kit 91F3066 91.4334161A Accessory Pouch 91F3034 43.41

(147960)


Waveforms Sine Square Triangle Pulse Ramp Stock No.4086 X X X X X X X 54M53914087 X X X X X X X 54M5393

(102108)

(15233)

81150A PULSE FUNCTIONARBITRARY NOISE GENERATORS

(84798)

AFG3000 SERIES ARBITRARY/FUNCTION GENERATORS

Mfg. Part No. 81150A is a 4-in-1 instrument with pulse, pattern, function arbitrary and noise generation in a single box.High precision pulse generation is enhanced with a versatile signal generator, offering distortion capabilities to stress adevice to its limit. The arbitrary bit shaped pattern is a unique new feature. The function arbitrary generator providesversatile waveforms and modulation capabilities to adapt the signal to a device’s requirements. Finally, the noisegenerator combines two required extremes: random noise and long repetition repeatable noise. Includes certificate ofcalibration, local power cord, USB cable, automation and product CDs.

ARBITRARY/FUNCTION GENERATORS

FUNCTION/ARBITRARYWAVEFORMGENERATORS

20MHz DDS SWEEPFUNCTION GENERATOR


1-24007DDS 7MHz DDS Sweep Function Generator 51M4035 446.884013DDS 12MHz DDS Sweep Function Generator 54M5386 558.884045 20MHz DDS Sweep Function Generator with Arb Function 54M5387 1118.884084 20MHz Programmable DDS Function Generator 54M5388 1036.004085 40MHz Programmable DDS Function Generator 54M5390 1288.004086 80MHz Programmable DDS Function Generator 54M5391 1540.004087 120MHz Programmable DDS Function Generator 54M5393 1848.00

• 20MHz frequency range (sine and square only)• Sine, square and triangle• Modulation in both AM and FM• Lin or log sweep function• Adjustable duty cycle• Adjustable DC offset• Large easy-to-read LCD display

• 10 standard waveforms with sine and square to10MHz, 20MHz or 80MHz

• Arbitrary waveforms at 50 MSa/s or 200 MSa/s• Custom Waveform Generation• Direct Digital Synthesis for Excellent Stability• Built-In Linear and Log Sweeps, AM, FM, FSK and

Burst Modulation• THD less than 0.04% and flatness as low as ±0.1dB

AFG3000 series advanced arbitrary/function generators are simple to use. Large 5.6″ display shows all the essentialinformation about the signal being produced at a glance. All models feature color display. Waveform parameters,including function, mode, and waveshape with labeled scales, are all displayed simultaneously on the screen.On-screen menu selections include frequency, period, phase, and channel selection. All models come complete withQuick-Start user manual, CD-ROM with reference manual, service manual, ArbExpress™ software, NIST-traceablecalibration certificate and power cord. Order accessories separately below.

High performance laboratory grade synthesized function gener-ators with arbitrary capability. Direct digital synthesis (DDS)creates stable, accurate output signals for all 27 built-in standardand complex (arbitrary) waveforms. Built-in 100 MHz universalcounter with frequency measurement and totalize function.

• 1u - 120 MHz pulse generation with variablerise/fall time

• 1u - 240 MHz sine waveform output • 14-bit, 2 GSa/s arbitrary waveforms • 512k samples deep arbitrary waveform memory

per channel • Noise with a selectable crest factor and signal

repetition time of 26 days • FM, AM, PW, PWM, FSK modulation capabilities

up to 10 MHz • 1 or 2 channel, coupled and uncoupled • Differential outputs

(102109)

• Large display and intuitive user interface• Generate frequencies up to 240 MHz and sampling

rates up to 2 GS/s • Dual channel models allow completely independent

selection of waveforms and frequencies • Front panel memory USB connectivity makes it easy

to save and transfer waveforms and settings • Large 5.6″ color display• Familiar Tektronix oscilloscope look and feel• All information is displayed on screen • Bandwidths to 240MHz • Sampling to 2GS/s• AM, FM, PM, FSK, PWM, Burst modulation• Memory size: 128 Kbyte• Interface: USB, GPIB and LAN

Mfg. part nos. 33210A, 33220A and 33250A function generator/arbitrary waveform generators give you 10 standardwaveforms and the ability to create versatile arbitrary waveforms, with 12-bit or 14-bit resolution and a sample rate of50 MSa/s (mfg. part no. 33210A & 33220A), or 200 MSa/s (mfg. part no. 33250A). In addition, mfg. part nos.33210A, 33220A and 33250A can be used as a pulse generator with variable edge time. Built-in modulation capabilitiesand both linear and log sweeps further expand your test possibilities without requiring additional function generators.Plus, the external clock-reference timebase increases the frequency stability while letting you generate precisephase-offset signals, phase-lock to another function generator, or to a 10 MHz frequency standard. All include intuiLinkArbitary software to create and edit waveforms as standard. Mfg. part no. 33220A includes GPIB, LAN and USBinterfaces. Mfg. part no. 33210A & 33250A includes GPIB interface.

SPECIFICATIONS

Mfg. part no. 4040DDS is a full featured direct digital synthesis (DDS) generator with a menu-driven front panelinterface. Waveform parameter changes and data entry can be made using the front panel rotary knob. It provides sineand square wave outputs over the frequency range from 0.1Hz to 20MHz in one extended range (triangle/ramped waveoutputs to 2MHz). A full range of triggering capabilities is available, including internal-external trigger source and gatedmodes of operation. Comes complete with line cord and users manual.

*At or below 200MHz; above 200MHz, 50mV-4V

Applications:• Electronic test and design• Sensor Stimulation• Functional test• Education & training


2186

9


SIGNAL & FUNCTION GENERATORS • COUNTERS


2GHz SYNTHESIZED RF GENERATOR


1-972-585 RF Generator 66F3578 163.00

Mfg. Part No. Description Stock No. Price Each1823A 2.4GHz Universal Frequency Counter with Ratio Function 57K8330 460.001856D 3.5GHz Reciprocal Frequency Counter with Totalize, Period

Functions97J8046 530.00

Mfg. Part No. Bandwidth DC to (MHz) Stock No. Price Each4071 31.5 06H2008 1725.00

(32188)

• 150kHz to 2000MHz frequency range• 10Hz setability, ±1ppm frequency stability• Locking to external frequency standard• -127dBm to +7dBm amplitude, 0.1dB steps• AM, FM and Phase modulation, internal or external• 80 character back-lit LCD display• Keyboard and rotary encoder control• Non-volatile storage for 9 generator set-ups• Full remote control through RS232 and GPIB

SPECIFICATIONSPeriod 100ns to 10ns

(10MHz to 0.1Hz)Pulse Width 50ns to 5sDelay 50ns to 5sMin. Pulse Width >30nsInput Impedance Typically 10KΩ


Each4075 25 MHz Arbitrary/Function Generator 40P9340 1495.004078 25 MHz Dual Channel Arbitrary/Function Generator 40P9342 2350.004075GPIB 25 MHz Arbitrary/Function Generator with GPIB Interface 40P9341 1615.004078GPIB 25 MHz Dual Channel Arbitrary/Function Generator with GPIB

Interface40P9343 2470.00

ACCESSORIES

CC510 General Purpose Function Generator Kit 40P4076 169.00CC520 Deluxe Function Generator and Counter Kit 40P4077 369.00

(33277)

(48680)

RF GENERATOR

Mfg. Part No. Description Stock No. Price Each72-6860 10MHz Function Generator 19C7734 378.98


72-6860 CALIBRATED W/DATA 10MHz Function Generator w/CalibratedCertificate

36C3011 488.98

(63488)

Mfg. part no. 72-7860 synthesized RF signal generator incorporates the essential features required for mostdevelopment, test and service work; namely high frequency accuracy and stability, wide dynamic range, low phasenoise and leakage, and flexible modulation capabilities. Mfg. part no. 72-7860 has a wide frequency range 150kHz upto 2GHz and incorporates AM, FM and Phase modulation (internal and external). The instrument can be operated usingeither the numeric or rotary controls, and can be remotely controlled via either and RS-232 interface or GPIB interface.Nine memories are provided for user set-ups. Includes mains lead and instruction manual.

UNIVERSAL FREQUENCY COUNTERS

SYNTHESIZED FUNCTION AND ARBITRARYWAVEFORM GENERATOR

(148475)

Specifications:Frequency range: (A) 100KHz∼300KHz; (B) 300KHz∼1000KHz; (C) 1MHz∼3.2MHz; (D) 3.0MHz∼10MHz; (E)10MHz∼30MHz; (F) 32MHz∼150MHz (up to 450MHz on third-harmonics). Frequency accuracy: ±3%. RF output:100mV RMS, approximately (up to 35MHz). Modulation: internal: 1KHz; external: 50Hz∼20KHz, at less than 1V RMS.Power requirements: 110V/220VAC, 50/60Hz. Dimensions: 10W x 6H x 51⁄4″D. Weight: 7 lbs. To order with calibratedcertificate, go online or call.

SPECIFICATIONS

10MHZ PULSEGENERATOR

Mfg. part no. 1823A benchtop universal counter measures frequency to 2.4GHz. 8-digit display provides up to 0.1Hzresolution. Large bright LED display. Includes period, period average, totalize, ratio, time interval, selectable gate timeand min./max./avg. 8-digit LED. Sensitivity to 20mV rms. AC power: 100/120/220/240VAC, 50/60Hz. Mfg. part no.1856D benchtop reciprocal frequency counter measures frequency to 3.5GHz based a 10 MHz TCO (TemperatureControlled Oscillator). 9-digit display provides up to 10 nHz resolution. Large bright LED display. Includes RPM(revolutions per minute) period, totalize functions. Sensitivity to 30mV rms.

Synthesized function and arbitrary waveform generators offer anumber of operating modes, providing a versatile, cost-effectivesignal source. Arbitrary waveform generator, sweep function gener-ator, pulse, VCO, AM, FM, modulation, FSK and burst modes are allaccessible quickly and easily from the front panel keyboard. Atrue12-bit arbitrary generator, highly stable, accurate and drift free.Generate every data point independently of the repetition rate. Allowscustom design waveforms on a PC, or download from a number ofsources, spreadsheet, oscilloscope or application programs.

25 MHz ARBITRARY/FUNCTION GENERATORS

Features:

• 0.1Hz to 10MHz Frequency Range• Independent Control of Pulse Delay• 50ns Minimum Pulse Width• Squarewave, Double Pulse and

Delayed Pulse• Free-Run-, Gated- and Triggered-

Modes• TTL/CMOS and Sync Outputs

• Solid-State Circuitry for HighStability

• Wide Frequency Range:100KHz∼450MHz

• Built-in 1KHz Oscillator• 1-Year Warranty

• 14-bit, 100 MSa/s, 400 k point arbitrarywaveform generator

• 25 MHz sine / 25 MHz square waveforms • Predefined pulse, ramp, triangle, noise, sin

(X)/X, exponential and gaussian waveforms• AM, FM and FSK modulation• 10 mVpp to 10 Vpp with 1 mVpp settable

amplitude resolution• Large graphical LCD • Fully programmable markers• Fully protected output• Closed case calibration• SCPI compliant command set• Optional GPIB versions available

FREQUENCYFrequence Range: 150kHz to 2000MHzSetting Resolution: 10Hz by direct keyboard entry, or in user-set-increments

of 10Hz to 999.99999MHzDisplay Resolution: 10Hz

Phase Noise: -116dBc/Hz @ 25kHz offset, 500MHz carrierResidual FM:(FM Off)

Equivalent peak deviation in a 300Hz to 3.4kHzbandwith: 12Hz @ 500MHz carrier

GENERAL

Display: 20 character x 4 row backlit alphanumeric LCDData Entry: keyboard selection of frequency, amplitude, etc.; value

entry direct by numeric keys or by rotary controlStored Settings: Up to 9 complete instrument set-ups may be stored and

recalled from battery-back memoryMECHANICAL:

Size: 130mm (3U)H; 212mm (half-rack)W; 330mmDWeight: 4.6 kg. (10 lbs.)Power: 100 or 110VAC ± 10% 50/60Hz

• Fully synthesized with 0.01Hz resolution to 31.5MHz• 0.001% frequency accuracy• DTMF source, DTMF detect and power

measurement

Function/arbitrary waveform generators combine the ability to produce nearly any conceivable arbitrary waveform withaccuracy and precision. Waveforms can be output in continuous, triggered, gated or burst modes. Front panel operationis straightforward and user-friendly. The instruments can be remotely controlled using SCPI-compliant commands viaRS232. Includes null modem serial interface cable, power cord and CD containing user manual and Wave-X software.

72-6860 series pulse generator features: 2 switch settings for output: 0.1-1.0V and 1.0-10V with a rise/fall time of 10nsinto 50Ω, load 15ns max. Power requirements: 115V or 230VAC (set internally), 50/60Hz. Dimensions: 5.5H x 8.6W x9.0″D. Weight: 3.5 lbs. Comes complete with instruction manual and power cord. Order with calibration certificateseparately below.

Mfg. Part No. Description Stock No. Price Each72-7860 2GHz Synthesized RF Generator 01J2675 4171.20

All Models:

(79011)

Dual Channel Model 4078:• Both channels offer full functionality• Synchronize both output signals to the same clock signal (external or internal)



9


COUNTERS • SPECTRUM ANALYZERS


(148886)

* Units with ABA suffix include US English hard copy manual in addition to CD manual.

ESA Basic Analyzers

Mfg.Part No.

FrequencyRange

ResolutionBandwidth

Sweep Time(freq.

domain)Third Order

IM Distortion

Overall AmplitudeAccuracy

1-button pre-config.

setupsE4411B BAS 9kHz -1.5GHz Opt 1DR:

100Hz-5MHzWithoutOpt 1DR:1kHz-5MHz

4ms <-75 dBc(+7.5 dBm)

±1.1 dB Power SuiteE4403B BAS 9kHz -3GHzE4408B BAS 9kHz -26.5GHz

ESA Standard AnalyzersE4402B STD 9kHz -3GHz Opt 1DR:

1Hz-5MHzWithout Opt 1DR:1kHz-5MHz

1ms < -85 dBc (+16 dBm)

±1.0 dB (0.4 dB 95%)

Power Suite,Phase Noise(Opt 226), Cable Fault(Opt 225),Cable TV(Opt 227)

E4404B STD 9kHz -6.7GHzE4405B STD 9kHz -13.2GHzE4407B STD 9kHz -26.5GHz

SPECIFICATIONSFrequency Range 9kHz to 3GHz, 100kHz to 3GHzResolution Bandwidths 10Hz to 1MHz in 1-3-10 squenceThird Order Intercept +10dBmDisplayed Average Noise Level(1kHz-10MHz RBW)

-142dBm (typ.), -124dBm (typ.) with preamp

Phase Noise -90dBc at 10kHz offset (typ.); -112dBc at 1MHz offset (typ.)Triggers Free run, video, external

Mfg. Part No. Description Stock No. Price Each53131A/ABA Universal Counter, 10 digit/s, 500 ps* 91F3043 2213.2553131A Universal Counter, 10 digit/s, 500 ps 95H9141 2168.0053132A Universal Counter, 12 digit/s., 150 ps 95H9142 3363.0053181A RF Counter 94H7048 1889.005063-9240 Rack-Mount Kit 91F3066 91.43


53131A/ABA CALIBRATED Universal Counter, 10 digit/s, 500 ps* 60K7401 2313.25

Mfg. Part No. Description Stock No. Price EachE4411B BAS 1.5GHz Spectrum Analyzer 97J9696 8640.00E4403B BAS 3GHz Spectrum Analyzer 97J9686 13317.00E4408B BAS 26.5GHz Spectrum Analyzer 97J9694 27398.00E4402B STD 3GHz Spectrum Analyzer 97J9684 16458.00E4404B STD 6.7GHz Spectrum Analyzer 97J9688 24209.00E4405B STD 13.2GHz Spectrum Analyzer 97J9690 29566.00E4407B STD 26.5GHz Spectrum Analyzer 97J9692 35884.00

ESA SERIES SPECTRUM ANALYZERS WITH TRACKING GENERATORS

E4411B BTG 1.5GHz Spectrum Analyzer with Tracking Generator 97J9697 10574.00E4403B BTG 3GHz Spectrum Analyzer with Tracking Generator 97J9687 17445.00E4408B BTG 26.5GHz Spectrum Analyzer with Tracking Generator 97J9695 31526.00E4402B STG 3GHz Spectrum Analyzer with Tracking Generator 97J9685 18177.00E4404B STG 6.7GHz Spectrum Analyzer with Tracking Generator 97J9689 25928.00E4405B STG 13.2GHz Spectrum Analyzer with Tracking Generator 97J9691 31285.00E4407B STG 26.5GHz Spectrum Analyzer with Tracking Generator 97J9693 37603.00

Mfg. Part No. Description Stock No. Price EachN9340B Hand-Held 3 GHz RF Spectrum Analyzer 94M4922 7987.00N9340BK-INM Hand-Held 3 GHz RF Spectrum Analyzer 73P9957 721.00

Mfg. Part No. Description Stock No. Price EachN9320B 9 kHz-3 GHz Spectrum Analyzer 08P4157 7871.00

(83772)

(15232)

(148585)

(116499)

N9320B RF SPECTRUM ANALYZER

ESA SERIES SPECTRUM ANALYZERS

N9340B HAND-HELD 3GHz RF SPECTRUMANALYZER

53131A

• 100 kHz to 3 GHz• Sweep time: 10 ms to 1000 s (span > 1 kHz)

6 µs to 200 s (span = 0 Hz)• RBW: 30 Hz to 1 MHz• DANL: –144 dBm w/preamp, –124 dBm w/o• TOI: +10 dBm at 200 kHz offset• 1 dB step input attenuator• SCPI control over USB/LAN*• 4-hour battery life• 11-language user interface

• Professional performance at a value price• Resolution BW: 10 Hz to 1 MHz • Displayed Average Noise level of -130 dBm, -148

dBm with pre-amplifier • TOI: +13 dBm third order intercept • Smart and fast measurements• Auto Tune — for auto signal search • 9.2 ms non-zero span sweep time • One-button power measurement suite (Channel

power, ACPR, SEM, OBW, TOI) • Easy front panel and remote operation• Intuitive GUI offering 11 languages • Standard USB connectivity for test automation and

memory stick support• Optional GPIB interface• SCPI command set for remote control

HIGH-PERFORMANCE 225MHzFREQUENCY COUNTERS

• 0.4dB Amplitude Accuracy • 100Hz to 5MHz Resolution Bandwith • Third Order IM Distortion < -75dBc• 5 Minute Warm-Up to Guaranteed Measurement Accuracy• Rugged Design, Weather Resistant, Snap on Battery Pack • Fastest Sweep Time for its Class (4ms Minimum) • Multiformat RF Power Measurement Suite • Large, High-Resolution, Color Display • Programming Code Compatibility to 8590 Series

Spectrum Analyzers• Free IntuiLink PC Software for Screen and Data Transfer

to Microsoft® Office• BenchLink Spectrum Analyzer PC Connectivity Software• Remotely View and Control ESA over the Internet• SCPI Programming and IVI COM Driver Support

Mfg. part no. N9340B provides a reliable, accurate and detailed picture of your communication spectrum. 6.5’’ TFTscreen with bright display for use indoors and outdoors. Back-lit keys for night use. Standard features includespectogram display, one-button power measurement: SEM, Channel power, OBW, ACPR and field strength mea-surement capability. Comes complete with multi-language quick start tutorial, CD-ROM of the manual and soft carryingcase. AM/FM, ASK/FSK modulation analysis options are also available; go online or call. Mfg. part no. N9340B workswith Agilent U2000 series USB power sensors to provide high accuracy power measurements; order separately on page2189 .

• Mfg. part no. 53131A 10 digit/second 500ps timeinterval resolution

• Mfg. part no. 53132A 12 digit/second 150ps timeinterval resolution

• High-accuracy frequency and time-intervalmeasurements up to 225 MHz on 2 channels, optional 3,5, or 12.4 GHz third channel

• Measures frequency, frequency ratio, period, timeinterval, rise/fall time, pulse width, duty cycle, phase(CH1 to CH2), totalize, peak voltage, time intervalaverage, time interval delay

ESA SERIES SPECTRUM ANALYZERS

Mfg. No. N9302B spectrum analyzer is a 9 kHz-3.0 GHz swept portable spectrum analyzer that can be a fundamentalcomponent in an automated system or in manufacturing functional/final/QA test systems. Features highly sensitivemeasurements with pre-amp for signal up to 3 GHz. Upper and lower limits can be set on screen for pass/faildeterminations using trace data. Four-trace detection display. SSB noise measurement and frequency counter with0.1Hz resolution. USB interface.

SPECIFICATIONS

53181A RF Counter:

*LAN port will be activated by a free firmware update in June 2008

53131A, 53132A Universal Counters:

• 10 digit /second resolution• High-accuracy frequency measurements to 225

MHz on 1 channel, optional 1.5, 3, 5, or 12.4 GHzsecond channel

• Measures frequency, frequency ratio (with opt.015), period, peak voltage

All Models:• Automatic limit testing, math (scale and offset),

statistics (min/max, mean, standard deviation)• GPIB (SCPI) with data transfer rate of 200 meas/

sec. Talk-only RS-232

53100A series high-performance frequency counters give you fast, precise frequency measurements at an affordableprice. These frequency counters feature an intuitive user interface and one-button access to frequently used functionsso you can make accurate measurements quickly and easily. Accessories Included: each counter comes with IntuiLinksoftware, standard timebase, power cord, operating, programming and service manuals.


2188

9


SPECTRUM ANALYZERS


HAND-HELD SPECTRUM ANALYZER

• Channel Power Measurement• Adjacent Channel Power Measurement• Occupied Bandwidth Measurement• Electric Field Strength Measurement (with Optional Dipole

Antennas)• Magnetic Field Strength Measurement (with Optional PR 26M)• Min/Max Hold• Average and Overwrite Mode• Marker Measurement• Peak Search, Auto Tuning, Auto Range, Save/Load• Hard Copy of Display (with Optional PT 2650)

Mfg. Part No. Description Stock No. Price EachFSH303 3GHz Spectrum Analyzer 02H2317 8450.00FSH313 3GHz Spectrum Analyzer with Tracking Generator 02H2318 10870.00FSH323 3GHz Spectrum Analyzer with Tracking Generator and

Preamplifier70J9905 13145.00

FSH18 18GHz Spectrum Analyzer 32M7763 19635.00FSH606 6GHz Spectrum Analyzer 70J9906 13465.00FSH626 6GHz Spectrum Analyzer with Tracking Generator and

Preamplifier70J9908 16965.00

ACCESSORIES

FSH-Z1 Power Sensor for R&S FSH3, 10 MHz to 8 GHz, 200 pW to 200mW

70J9896 2915.00

FSH-Z14 Power Sensor for R&S FSH3, 25 MHz to 1 GHz, 30 mW to 300 W 19K5326 4145.00FSH-Z44 Directional Power Sensor; 200 MHz to 4 GHz; 30 mW to 120

300W70J9902 3290.00

FSH-Z2 VSWR Bridge and Power Divider Module 02H2313 2895.00FSH-Z22 Serial-to-Parallel Interface Converter Module 02H2314 320.00FSH-Z32 Battery Pack 02H2316 220.00FSH-Z21 12 V Car Adapter for Cigarette Lighter Socket 70J9927 200.00FSH-Z25 Softside Carrying Case 02H2315 250.00

SPECIFICATIONSAccuracy and High-Repeatability ±1.5dB overall amp; ±0.2dB scale fidelityFrequency Range 100kHz to 3GHz (Mfg. Part No. N1996A-503)

100kHz to 6GHz (Mfg. Part No. N1996A-506)Resolution Bandwidths 10Hz to 1MHz in 1% steps, 3MHz, 5MHzThird Order Intercept +18dBm (nom.)Displayed Average Noise Level(1GHz 10H RBW)

-128dBm (typ.), -146dBm (typ.) with preamp

Phase Noise -85dBc at 10kHz offset (typ.); -125dBc at 1MHz offset (typ.)Triggers RF Burst, video, external

Mfg. Part No. Description Stock No. Price EachN1996A-503 3GHz Spectrum Analyzer 66K0496 9565.00N1996A-506 6GHz Spectrum Analyzer 66K0497 13093.00

KEYCODE ENABLED OPTIONSMfg. part no. N1996A-271 Spectrogram and mfg. part no. N1996A-SRK Stimulus Response Calibration kit aresoftware-only upgrades added to the spectrum analyzer by entering a unique keycode on it’s keypad. The purchaser willreceive a letter from Agilent Technologies with an entitlement code and instructions. This entitlement code together withthe spectrum analyzer’s serial number are entered into Agilent’s website and a unique keycode is generated in real time.By entering the keycode into the spectrum analyzer, the feature is enabled.

Mfg. Part No. Description Stock No. Price EachN1996A-271 Spectrogram Measurement Upgrade 66K0495 520.00N1996A-SRK Stimulus Response Calibration Kit 66K0490 520.00

ACCESSORIES

N1996A-HTC Hard-side Transit Case 69K6980 835.00N1996A-SCC Soft-side Carrying Case 69K6981 206.00N1996A-1CM Rack Mount Kit without Handles 66K0493 8928.00N1996A-1CP Rack Mount Kit with Handles 66K0494 4550.00

Mfg. Part No. Description Stock No. Price Each72-6696 1GHz Spectrum Analyzer 95B8304 2163.00


72-6696 CALIBRATED 1GHz Spectrum Analyzer Calibrated w/Data

27C8730 2173.05

(73597)

(49470)

FSH series hand-held spectrum analyzers are ideal for rapid, high-precision, cost-effective signal investigations. Theyprovide a large number of measurement functions to handle anything from the installation or maintenance of a mobileradio base station to onsite fault location in RF cable to development and service. Choose from the basic 3GHz or 6GHzmodels, units with an internal tracking generator, models with an preamplifier or models with both. The trackinggenerator extends the analyzer’s range of applications to cover distance-to-fault (DTF) measurements on cable andscalar network analysis. Choose from a variety of accessories, ordered separately below, including power sensors forhigh-precision power measurements to higher frequencies.

Perfect for many different applications. Compact, lightweight and inexpensive unit, ideal for testing W-CDMA, CDMA,GSM, PDC, PHS, Wireless LAN and Bluetooth systems. There are a wide range of accessories available and some ofthem may be necessary for your application, so please review the available accessories before ordering. Includedaccessories are mfg. part no. BC 2650 AC adapter, mfg. part no. LC 2650 soft carrying case, mfg. part no. BP 2650Ni-MH battery pack, accessory pouch, fuse, and instruction manual.

(85826)


1-22650 Hand-Held 3.3GHz Spectrum Analyzer 25H8093 6720.002658 Hand-Held 8.5 GHz Spectrum Analyzer 26K2805 10395.002652 Hand-Held 3.3GHz Spectrum Analyzer with Tracking Generator 60M9897 6950.00

ACCESSORIES

AK 2650 PC Interface Software 25H8074 320.32AN 301 Dipole Antenna (0.8 to 1.0GHz) 25H8075 262.08AN 302 Dipole Antenna (1.25 to 1.65GHz) 25H8076 262.08AN 303 Dipole Antenna (1.7 to 2.2GHz) 25H8077 262.08AN 304 Dipole Antenna (2.25 to 2.65GHz) 25H8078 262.08AN 305 Dipole Antenna (390 to 410MHz) 25H8079 341.60BP 2650 Ni-MH Battery Pack 25H8080 215.04CT2701A Coaxial Adapter Kit 52M8751 225.91PR 26M Magnetic Field Probe 25H8089 3808.00PT 2650 Printer 25H8090 618.24PX 2650 Printer Roll Paper (Pkg. of 10 Rolls) 25H8091 110.88

1GHz SPECTRUM ANALYZERS

• Variety of measurement routines • Color display• Frequency range to 6GHz • 1kHz to 1MHz RBW• AM/FM monitoring demodulator• Noise marker• External trigger input• Storage of up to 100 measurements and settings • Easy data transfer to PC using FSH View software• 4 hours operating time on battery power• Dimensions: 6.7W x 4.7D x 10.6″H• Weight: 5.5 lbs.

CSA SERIES SPECTRUMANALYZERS

(74578)

Frequency range: 150kHz to 1000MHz (usable to 1150MHz). Frequency resolution: 1KHz C.F. entry. Frequency display:61⁄2 digit setting. Frequency span: zero, 2KHz to 100MHz/division, in a 1-2-5 sequence. Frequency resolutionbandwidths: 3kHz, 30kHz, 220kHz, 4MHz. Amplitude accuracy: ± 1.5dB typical @ 0dB, 80MHz. Power source:100/120/220/230/VAC, 10%, 50/60Hz. Dimensions: 121⁄4 x 6 x 18″. Weight: 19 lbs. Order mfg. part no. 72-6696C withcalibrated certificate separately below. CE compliant.

• Simple to use• Easily upgraded• Outstanding reliability• Lightweight and portable• DC power supply or optional internal

battery packs• Built-in tracking generator• Built-in VSWR bridge• Built-in functions including ACP, OBW • USB, 100MB LAN, SCPI• 1dB step attenuator

FSH SERIES HAND-HELDSPECTRUM ANALYZERS

CSA series spectrum analyzers combine best-in-class performance, low-cost, and ease-of-use in a single, lightweight,portable package. Two internal hardware upgrades, a Preamplifer and a Tracking Generator, are available by specialorder; call Newark. Convenience features, including autoscale, autorange, tunable RBW’s, easy upgrades, built-in help,self-loading firmware, and an autotune function (which centers and scales to strongest signal) allows eveninexperienced users to quickly begin making measurements. Designed for unmatched reliability (>30,000 hrs. MTBF).Features four full-speed, USB 1.1 (12Mbit/sec) ports: 2 type A ports on front panel and 1 type A and 1 type B (Slave) porton rear panel. XGA (extended graphics array) active matrix TFT LCD display measures 8.4″ diagonal with 1024 x 768screen resolution. Analyzers include a DC power supply (auto-switching input 85-265VAC, 47-63Hz).

• Frequency Range 150kHz to 1000MHz• High Frequency Stability ± 10 ppm• Digitally Synthesized• Easy-to-Operate• State-of-The-Art Phase-Locked RF• Accurate Measurement and Performance• 2 Markers for Absolute and Relative

Measurement• 9 Memories of Save/Recall

72-6696



9


SPECTRUM ANALYZERS • RF POWER METERS & SENSORS


(148881)

Mfg. Part No. Description Stock No. Price EachE4416A EPM-P Series Single-Channel Power Meter 94H7052 4763.00E4417A EPM-P Series Dual-Channel Power Meter 95H7894 7485.00

Mfg. Part No. Description Range Stock No. Price EachN1911A Single-Channel Power Meter 50 MHz - 40 GHz 56J8920 7501.00N1912A Dual-Channel Power Meter 50 MHz - 40 GHz 56J9852 10568.00N1921A Wideband Power Sensor 50 MHz - 18 GHz 56J9853 3789.00N1922A Wideband Power Sensor 50 MHz - 40 GHz 56J9854 4433.00

Mfg. Part No. Description Stock No. Price EachPSA1301T Hand Held Spectrum Analyzer, 1.3 GHz 88K0921 1683.15PSA2701T Hand Held Spectrum Analyzer, 2.7GHz 54M5938 2284.52PSAHC Case for PSA1301T & PSA2701T 88K0920 110.25

DIPOLE ANTENNAS

AN 301 Dipole Antenna (0.8 to 1.0GHz) 25H8075 262.08AN 302 Dipole Antenna (1.25 to 1.65GHz) 25H8076 262.08AN 305 Dipole Antenna (390 to 410MHz) 25H8079 341.60

Mfg. Part No. Description Stock No. Price EachU2000A 10MHz- 18GHz USB sensor 52M7891 3402.00U2001A 10MHz-6GHz USB sensor 88M0475 2608.00U2002A 50MHz-24GHz USB sensor 08P0339 4196.00U2004A 9kHz-6GHz USB sensor 52M7893 2949.00U2000B 10MHz to 18GHz USB sensor (-30 dBm to +44 dBm) 09P8814 4763.00U2001B 10MHz to 6GHz USB sensor (-30 dBm to +44 dBm) 09P8816 3969.00U2000H 10MHz to 18GHz USB sensor (-50 dBm to +30 dBm) 09P8815 3856.00U2001H 10MHz to 6GHz USB sensor (-50 dBm to +30 dBm) 09P8817 3062.00U2002H 50MHz to 24GHz USB sensor (-50 dBm to +30 dBm) 09P8818 4650.00

ACCESSORIES

U2031A Power sensor cable; 5ft. (1.5m) 09P8819 137.00U2031B Power sensor cable; 10ft. (3m) 09P8820 165.00U2031C Power sensor cable; 16.4ft. (5m) 09P8821 207.00U2032A Trigger Cable BNC Male to SMB female 50 ohm, 5 ft. (1.5m) 09P8822 172.00

(82990)

(88655)

(148552)

1.3GHz & 2.7GHz HAND HELD SPECTRUMANALYZERS

P SERIES POWER METERSAND SENSORS

Type DescriptionDimensions (mm)

L x W x H Stock No. Price EachN8485A Thermocouple Power Sensor 121 X 38 X 30 09P8792 1890.00N8481A Thermocouple Power Sensor 130 X 38 X 30 09P8790 1291.00N8482A Thermocouple Power Sensor 130 X 38 X 30 09P8791 1343.00

EPM-P AND EPM SERIESPOWER METERS

U2000 SERIES HIGHPOWER USB SENSORS

• 30 MHz Video Bandwidth With 100 MSa/s Continuous Sampling• Versatile Connectivity With USB, LAN and GPIB as Standard• Difference and Ratio Math Functions: (A-B, B-A, A/B and B/A)

(Type N1912A)• Stable Triggering With Versatile Time-Gating Features• Presets for Radar and Wireless Systems• Color Display With Graphical User Interface• 2-Year Calibration Cycle

TTI HAND-HELD SPECTRUM ANALYZER(136340)

U2000 Series of high power USB sensors offer wide frequency (up to 24GHz) and dynamic (up to +44dBm) rangesmeasurements covering most applications. With time-gated, you can measure the burst signal at the time windowdefined by you, using the built-in external trigger port. In addition to calibrating the PNA source power, the USB sensorturns your existing PNA into an accurate power meter. All these features testing are fully powered USB port, external ACpower supply is not required.

The P-series N1911A single-channel and N1912A dual-channel powermeters provide peak, peak-to-average ratio, average power, rise time, falltime, maximum power, minimum power and statistical data of widebandsignals (30 MHz video bandwidth) with 100 M samples per secondcontinuous sampling. When used with the N1921A or N1922A widebandpower sensors, these power meters offer a measurement frequency rangeup to 40 GHz with internal zero and calibration measurements, and will bebackwards compatible with the Agilent 8480 and E-series power sensors.

N8480 SERIES RFPOWER SENSORS

Features:

EPM-P Series Features:

• Frequency range 150kHz to 1.3GHz (PSA1301T)1MHz to 2.7GHz (PSA 2701T)

• Full color TFT screen, 480 x 320 pixels• Handheld format, weight under 500 grams• 4 hour battery life per charge or AC power • Integrated tilt stand for bench top use• Zero span mode with AM/FM demodulation• Continuous, Single, Peak hold and Average sweep modes• 80dB dynamic range, -93dBm noise floor• RBW of 1MHz, 280kHz or 15kHz• Twin markers with absolute/difference• Smart marker movement with peak finding• Unlimited storage for waveforms, set-ups and fully annotated

screens• Data transfer to PC for analysis and printing• Integrated handheld computer providing word processing,

spreadsheets etc

N8481A & N8482A

N1912A Meter/Sensors

• 94dB dynamic range, measure average powerup to +44dBm

• 10MHz to 24GHz frequency range• Support concurrent measurements of more

than 20 channels USB power sensors• Time-gated measurement for commonly found

burst signals• Store multiple sets of frequency dependant

offset table• Measure RF power without power meter• Fully USB-powered even in time-gated mode• Turns Agilent PNA and handheld spectrum

analyzer into an accurate power meter• Data connection via USB

• Ideal for today’s R&D and manufacturingenvironments

• Peak, average, peak-to-average ratio and time-gatedmeasurements for TDMA, CDMA and W-CDMAtesting

• Time-gated power measurements • Compatible with all 8480 series and E-series power

sensors• Speed, accuracy and reliability for greater throughput

without compromise

EPM Series Features:

N8485A

The PSA1301T and PSA2701T utilize the power of a handheld computer to provide a level of performance that waspreviously impossible for an instrument of this small size and low cost. The result is RF spectrum analyzers of highfunctionality in a compact and lightweight format. Ideal for field applications, their low cost will also make themattractive for many bench top applications. A Palm Tungsten TX handheld computer is incorporate within their housing tocreate a single integrated instrument. Access to the USB port is provided within the body of the instrument, and all of thefunctionality of the handheld computer is retained, however it can be removed from the instrument if required.

Features:

• Fast measurement speed up to 100 readings per second (E4419B) up to 200 readings per second (E4418B),over the GPIB (E4419B) with E-series sensors

• Speed doubles using the 8480 series power sensor (compared to 437B)• No range-switching delays with 8480 series sensors, and only one fast-range switching point with E-series

sensors• RS 232/422 serial interface is standard• GPIB connector for remote control of all functions

• High accuracy with excellent linearity and noisespecifications

• Excellent SWR, linearity and repeatability• Built-in EEPROM features for easy calibration• Up to 55 dB wide dynamic range for one sensors

solution from -35 dBm to +20 dBm

EPM-P series power meters offer excellent performance optimized for wireless communications testing. Mfg. part no.E4416A is a single-channel meter and mfg. part no. E4417A is a dual-channel meter, both feature a frequency range of9 kHz to 110 GHz, sensor dependent. Power meter measurements include: peak, peak-to-average ratio and averagepower of RF and microwave signals. Extensive triggering features are available for making time-gated measurements.Fast test times, with measurement speed of up to 1000 corrected readings per second.

Specifications:

EPM series power meters are low-cost, high-performance, programmable meters for average power measurements.They are compatible with 8480 series and E-series power sensors (except the E9320A series family). Depending uponwhich sensor is used, the EPM series power meters can measure the average power over the power range -70 dBm to+44 dBm, at frequencies from 9 kHz to 110 GHz.

• Frequency range: 10 MHz to 18 GHz (N8481A), 100kHz to 6 GHz (N8482A), 10 MHz to 26.5 GHz

• Damage level: 25 dBm avg. 15 W/2 µs pk• Operating temperature: 0 °C to 55 °C

The new power sensors are integrated with EEPROM feature, whichallows users to calibrate the power sensors without manually enteringthe calibration factors to the power meter. In comparsion to legacy8480 Series Power Sensors, there are tremendous improvements suchas wider dynamic range and frequency range, better accuracy, linea-rity, repeatability as well as the SWR.


2190

9


RF POWER METERS & SENSORS • DATA ACQUISITION


EPM-P AND EPM SERIES POWER METERS (CONT.)

Mfg. Part No. Description Stock No. Price Each34980A Multifunction Switch/Measure Mainframe — Holds Up to 8

Plug-in Modules56J9919 2447.00

34921A 40-Channel Armature Multiplexer with Low Thermal Offset 56J9904 810.0034922A 70-Channel Armature Multiplexer 56J9905 1309.0034923A 40/80-Channel Reed Multiplexer 56J9906 1014.0034924A 70-Channel Reed Multiplexer 56J9907 1510.0034925A 40/80-Channel Optically Isolated FET Multiplexer 56J9908 1208.0034931A Dual 4 x 8 Armature Matrix 56J9909 912.0034932A Dual 4 x 16 Armature Matrix 56J9910 1510.0034933A Dual/Quad 4 x 8 Reed Matix 56J9911 1015.0034937A 28-Channel Form C and 4-Channel Form A 56J9912 912.0034938A 20-Channel 5A Form A 56J9913 1106.0034941A Quad 1 x 4 50-Ohms, 3GHz RF Multiplexer 56J9914 1611.0034942A Quad 1 x 4 75-Ohm 1.5 GHz RF Multiplexer 29K9466 1611.00

Mfg. Part No. Description Stock No. Price EachE9323A 50 MHz to 6 GHz, 5 MHz bandwidth 95H7907 3041.00E9327A 50 MHz to 18 GHz, 5 MHz bandwidth 95H7910 3536.00

E9300 AVERAGE POWER SENSORS

E9300A 10 MHz to 18 GHz, -60 to +20 dBm 95H7899 2169.00E9300H 10 MHz to 18 GHz, -50 to +30 dBm 95H7901 2417.00E9301A 10 MHz to 6 GHz, -60 to +20 dBm 95H7902 1642.00E9301B 10 MHz to 6 GHz, -30 to +44 dBm 95H7903 2794.00E9301H 10 MHz to 6 GHz, -50 to +30 dBm 95H7904 1880.00E9304A 9 kHz to 6 GHz, -60 to +20 dBm 95H7905 1870.00

8480 SERIES POWER SENSORS

8481D 10 MHz to 18 GHz, -70 to -20 dBm 95H9453 1642.008482H 100 kHz to 4.2 GHz, -10 to +35 dBm 95H9457 1818.008481B 10 MHz to 18 GHz, 0 to +44 dBm 95H9452 4206.008481H 10 MHz to 18 GHz, -10 to +35 dBm 95H9454 1849.008487A Power Sensor, 50 MHz to 50 GHz 95H9461 4526.00

E441XA CW POWER SENSORS

E4412A 10 MHz-18 GHz Wide-Dynamic-Range Power Sensor 95H9604 1565.00E4413A 50 MHz-26.5 GHz Wide-Dynamic-Range Power Sensor 95H9605 2102.00

Mfg. Part No. Description Stock No. Price EachU2751A USB Modular Switch Matrix 05N1305 957.00

ACCESSORY

U2922A-201 32-Channel Terminal Block 08P3581 159.00

Mfg. Part No. Description Stock No. Price EachE4418B EPM Series Single-Channel Power Meter 95H9606 4588.00E4419B EPM Series Dual-Channel Power Meter 95H7895 7861.00

Mfg. Part No. Description Stock No. Price EachU2722A USB Modular Source Measuring Unit 05N1304 2213.00

(78740)

Mfg. Part No. 2460Frequency Range 100 kHz to 2 GHzFrequency Resolution Min. 6.25 kHz multiplesFrequency Selection Mode Center, Start/Stop, SpanAmplitude Measurment Range -45 dBm to -110 dBmAmplitude Internal Attenuation 10 dBSweep Trigger Mode Free Run/Single Run/Continuous/Wave Squelch RunFrequency Counter Range 35 MHz to 2 GHzFrequency Counter Resolution 7 DigitsFrequency Sampling Time 1 secSpectrum Input Port RF Connector N type Female, 50ΩOperating Temperature 0 °C to 40 °C

(134273)

(78756)

Mfg. Part No. Description Stock No. Price Each2640 RF Field Strength Meter 13P0407 2250.00

(134268)

34980A MULTIFUNCTION SWITCH ANDDATA ACQUISITION UNIT AND MODULES

E-SERIES AND 8480 SERIES RFPOWER SENSORS

Mfg. part no. 34980A multifunction switch/measure unit is a compact, economical one-box solution for medium tohigh-density switch/measure applications in design verification, automated test and data acquisition. Mfg. part no.34980A eight-slot mainframe, with built-in 6.5 digit DMM, holds your choice of 19 different plug-in modules. Theseinclude switching from DC to 26.5 GHz, digital I/O, D/A converters, and counter/totalizer functionality. One mainframecan accommodate up to 560 two-wire multiplexer channels or 4096 matrix cross points. Mfg. part no. 34980A alsoincludes USB, Ethernet, and GPIB as standard interfaces to the PC. With Ethernet connections and the graphical webinterface, you can access and control the unit remotely. Standard connectors on the modules also allow you to usestandard, off-the-shelf 50- and 78-pin shielded cables to easily connect test signals from the instrument to the unitunder test or other test points. Additional wiring options include detachable terminal blocks for discrete wiring needs andmass interconnect solutions. BenchLink Data Logger Pro Software available, go online or call.

(136331)

E-series E9320 peak and average power sensors are designed for use with the EPM-P power meters, and provide peak,peak-to-average ratio and average power of complex digital modulation formats.

USB MODULARSWITCH MATRIX

USB MODULAR SOURCEMEASURING UNITS

Features:

2.0 GHZ RF FIELDSTRENGTH METER

E-series E9300 average power sensors are designed for use with the EPM and EPM-P series power meters, andoperate over 9 kHz to 24 GHz, -60 to +44 dBm.

Features:

34980A with Modules

• 8-Slots With Integrated 6.5 Digit Multimeter• 21 Plug-in Modules with LF/RF/uW Switch, DIO,

D/A Converter, and Counter• Up to 560 2-wire mux or 4096 matrix cross-points

in one mainframe• Scan rates up to 1,000 channels/sec.• Standard LAN, USB, GPIB Connectivity to PC• Standard Cables, Terminal Cards or Mass

Interconnect• Priced Up to 40% Less Than Comparable Module

Solutions in VXI or PXI• 34832A BenchLink Data Logger Pro allows for

advanced data logging and decision makingwithout programming

E-Series E441XA CW power sensors are designed for use with the EPM and EPM-P series power meters, and operateover 10 MHz to 33 GHz, -70 to +20 dBm.

• 4x8 2-wire matrix configuration• Max. 30V/2A• -30dB crosstalk and <3dB insertion loss at 45MHz operation• 4ms Max. switching time• Command logger function• DB25 connector• High-speed USB 2.0 (480MBits/s) TMC488.2 compatible• Standalone and Modular capabilities; Requires U2781A for

modular capability

Features:

• 3 Channels• 4 quadrant operation (±20 V)• Command logger function• High current sensitivity of 100pA with 16 bit resolution• 0.1% basic accuracy• Low current measurement down to pA levels• Voltage and Current programming / readback• High speed USB2.0 (480MBits/s)TMC488.2 compatible• Standalone and modular capabilities; Requires U2781A for

modular capability

The U2751A USB Modular Switch offers a flexible connection path between the device under test and test equipment,thus allowing different instruments to be connected to multiple points on the device under test at the same time. Thisinstrument offers measurement at a higher bandwidth up to 45MHz. It uses the common non-proprietary standardhigh-speed USB 2.0 interface that provides ease of connectivity – allowing users to set up and configure their testsswiftly with the plug and play feature. Certificate of calibration available on all models, go online or call Newark.

8480 series power sensors are designed for use with the EPM series, EPM-P series, 70100A and E1416A powermeters, and operate over 100 kHz to 110 GHz, -70 to +44 dBm.

The U2722A USB modular source measure unit (SMU) is more than just a power supply—it has fast response time, andhas voltage and current programming/readback with high accuracy measurement capabilities. The U2722A is capableof four-quadrant operation, acting as current source and also as current sink (load) with both polarities of the outputvoltage.

• 100 kHz to 2 GHz measurement range with a maximum display span of 400 MHz• Hand-held and battery operated portability• Built-in 2 GHz frequency counter• Detects wide band (180 kHz) and narrow band FM (12.5 kHz), AM & SSB (2.4

kHz) signals

The hand-held RF field strength meter is battery operated and is capable of measuring RFlevels and electric field strength. The RF field strength meter provides field technicians andengineers with a cost-effictive measurement tool for basic signal investigations at only afraction of the cost of a full-featured conventional spectrum analyzer. The RF field strengthanalyzer is ideal for field testing, installing and maintaining mobile telecommunicationssystems such as cellular and cordless phone, CB paging, paging cable and satellite TVsystems as well as performing antenna site measurements and maintenance. Contentsinclude: Manual, detachable antenna, carry case, software, RS232 interface cable, coaxialcable, power supply, and rechargeable battery.

Power sensors are designed to match the user’s signals and modulation types. Choose from a versatile line of nearly 20different power sensors from Agilent Technologies. The sensors come in two series--8480 series and E-series. 8480series sensors include diode and thermocouple sensors. E-series are wide dynamic range diode sensors that store theircalibration factors in EEPROM. The E-series are comprised of three families for different applications.

E9320 PEAK AND AVERAGE POWER SENSORS

Specifications:



9


DATA ACQUISITION


34980A MULTIFUNCTION SWITCH AND DATA ACQUISITION UNIT ANDMODULES (CONT.)

Mfg. Part No. Description Stock No. Price Each34945A Microwave Switch/Attenuator Driver 64J2250 1202.0034946A-004 Dual 1 x 2 SPDT Terminated Microwave Switch (4GHz) 59K0719 1503.0034946A-020 Dual 1 x 2 SPDT Terminated Microwave Switch (20GHz) 59K0720 1739.0034947A-004 Triple 1 x 2 SPDT Unterminated Microwave Switch (4GHz) 59K0721 1265.0034947A-020 Triple 1 x 2 SPDT Unterminated Microwave Switch (20GHz) 59K0722 1471.0034951A 4-Channel Isolated D/A Converter with Waveform Memory 56J9917 1015.0034952A Multifunction Module with 32-Bit DIO, 2-Channel D/A and

Totalizer56J9918 709.00

ACCESSORIES

Y1130A Rack Mount Kit 56J9896 126.00Y1135A 50-Pin, 1.5m D-Sub Interconnect Cable 56J9897 119.00Y1137A 78-Pin, 1.5m D-Sub Interconnect Cable 56J9898 155.00Y1138A 78-Pin, 3m D-Sub Interconnect Cable 56J9899 186.00Y1139A Solder Cup Connector Kit for Types 34921/23/24/31/32/33/

37/38 — 50-Pin D-Sub Female56J9900 118.00

Y1140A Solder Cup Connector Kit for Type 34922 — 78-Pin D-SubFemale

56J9901 148.00

Y1141A Solder Cup Connector Kit for Types 34951/52 D-Sub Male 56J9902 98.41Y1142A Solder Cup Connector Kit for Type 34950A — 78-Pin D-Sub

Male56J9903 123.00

Mfg. Part Nos. ADC-20 ADC-20Resolution 20 bits 24 bitsNo. of Channels 4 Differential, 8 Single-Ended 8 Differential, 16 Single-EndedConversion Time (Per Channel)

660ms, 340ms, 180ms, 100ms, 60ms

(83000)

Mfg. Part No. Description Stock No. Price Each34970A Data Logger/Switch Unit 83F4190 1561.0034901A 20-Channel Multiplexer 83F4191 481.0034902A 16-Channel Multiplexer 83F4192 567.0034903A 20-Channel Actuator/GP Switch 83F4193 414.0034904A 4 x 8 Matrix Switch Module 83F4194 481.0034905A Dual 4-Channel RF Multiplexer 50Ω 83F4195 758.0034906A Dual 4-Channel RF Multiplexer 75Ω 83F4196 758.0034907A Multifunction Module 83F4197 360.0034908A 40-Channel Single Ended Multiplexer 83F4198 481.00

(36170)

34970A Modules

ADC SERIES PC-BASED HIGH-PRECISION DATA LOGGERS

Mfg. Part No. Description Stock No. Price EachE5810A LAN GPIB Gateway 95H9607 1112.0082350B PCI GPIB Interface Card 95H9610 531.0082357B USB/GPIB Converter 31M9424 541.00E5805A USB/4-Port RS232 Interface 56J9710 371.00E5813A Networked 5-Port USB Hub 29K9465 481.0010833A GPIB Cable Assembly, 1M Long 91F7425 80.1510833B GPIB Cable Assembly, 2M Long 91F7426 90.17

• 3-slot mainframe, 8 switch and control plug-in modules• 61⁄2-Digit (22-Bit) Internal DMM• Scan rates up to 250 channels/second• Measures 11 Functions Without External Signal Conditioning• Up to 60 2-wire mux or 96 2-wire matrix cross-points in one mainframe• Benchlink Data Logger Software to configure and control tests, display results and transfer data• Built-In GPIB and RS-232 Interfaces• 0.004% Basic DCV Accuracy• 50K Readings of Non-Volatile Memory Holds Data When Power Is Removed

Mfg. part nos. ADC-20 and ADC-24 are multi-channel, precision data acquisition solutions. High-resolution,true-differential inputs, galvanic isolation, and selectable sampling rates combine to provide precise and accuratemeasurements. Configurable inputs, digital inputs and outputs, and programmable voltage ranges enable flexibilityacross a wide variety of applications. Up to four units can be connected to one PC through the USB port. No power cord orbatteries are needed.Selectable bipolar voltage ranges allow both models to be used with a wide range of sensors and signal types. Mfg. partno. ADC-20 Series Terminal Board provides screw terminals for quickly connecting and disconnecting differentsensors; order separately below. Each differential input can also be configured as two single-ended inputs. For example, mfg. part no. ADC-24 datalogger can use four differential and eight single-ended inputs, or two differential and 12 single-ended inputs, or anothercombination as needed. Mfg. part no. ADC-24 features four configurable digital input/output channels enable control ofalarms or other devices. The I/O channels can be configured in any combination. For example, three digital inputs couldbe used with one digital output.Both models include PicoLog® software for collection, manipulation, analysis, display and exporting of data [PicoLog®

(data logger), PicoScope® (oscilloscope, spectrum analyzer, meter), drivers and examples (C, Delphi and Visual Basic,Labview, Agilent VEE6.1 and Excel)].

(78713)

GPIB & INSTRUMENT CONTROLPRODUCTS

Data Logger

34970A DATA ACQUISITIONSWITCH UNIT AND MODULES

34901A 20-Channel Armature Multiplexer60 ch/s scanning, 2- and 4-wire scanning, built-in thermocouple reference junction, 300V switching. 2 additional fusedinputs (22 channel total) route up to 1A of current to the internal DMM, allowing current measurements without the needfor an external shunt.34902A 16-Channel High-Speed Multiplexer Module 250 channels/s scanning, 2- and 4-wire scanning, built-in thermocouple reference junction, 300V switching. Userprovided shunts required for current measurements. 34903A 20-Channel Actuator/General Purpose Switch ModuleSPDT (Form C) latching relays, 300V, 1A, 50W actuation and control. Use to cycle power to test sample, actuate externalpower relays and solenoids. 34904A 4 x 8 2-Wire Matrix Switch Module 32 2-wire crosspoints, 300V, 1A switching. Rows or columns may be connected between multiple modules to build 8 x8, 4 x 16 or larger matrices, with up to 96 crosspoints in a single frame.

Agilent offers a full line of interface products to connect your instrumentation to your PC. These interface cards andconverters make it easy for you to access and control instruments, exchange data, and create your own automated testapplications. You can access your GPIB instruments using standard I/O such as LAN, USB, or if you prefer, with an IEEE488 GPIB interface. Mfg. part no. E5810A LAN-to-GPIB gateway provides remote access and control of GPIBinstruments via 10BASE-T or 100BASE-TX LAN networks, enabling resource sharing, global project communicationsand remote access to instruments. Mfg. part no. 82350B high-performance GPIB card plugs into the backplane of yourcomputer and provides maximum system throughput. Mfg. part no. 82357B provides a direct connection from a USBport on your laptop or desktop PC to GPIB instruments. Mfg. part no. E5805A provides a direct connection from the USBport on your notebook or desktop PC to up to four RS-232 instruments or devices. Mfg. part no. E5813A providesremote control and monitoring of native USB-compatible devices and RS-232 devices (using mfg. part no. E5805A) viaa standard LAN connection.

Terminal Board

• Simplified connectivity over GPIB, USB and LAN• Easy access and control of GPIB instruments• Support of industry standards – IEEE 488, USB

and Ethernet• VISA IO libraries provide industry-standard

connectivity software• High throughput solutions up to 900 kB/s

34905A Dual 4-Channel RF Multiplexer 50 Ohms 2GHz bandwidth (1GHz with included BNC-to-SMB adapters). Route signals between your DUT and signal generator,oscilloscope, spectrum analyzer, or other instrumentation. Arranged as two independent 1 x 4 multiplexers.34906A Dual 4-Channel RF Multiplexer 75 Ohms 2GHz bandwidth (1GHz with included BNC-to-SMB adapters). Route signals between your DUT and signal generator,oscilloscope, spectrum analyzer, or other instrumentation. Arranged as two independent 1 x 4 multiplexers.34907A Multifunction Module16 bits of digital input and output, 100kHz totalizer input. Two ±12V analog outputs. 34908A 40-Channel Single Ended Multiplexer Module60 channels/s scanning, single-wire switching for common-low applications, built-in thermocouple reference junction,300V switching. All two-wire internal measurements except current are supported.

• 20- or 24-bit resolution • Accurate to within 0.1%• Up to 8 true differential inputs• Up to 16 single-ended inputs • Fast conversion time • Digital output for control • Galvanic isolation from PC

eliminates noise pickup • Data acquisition software

included

E5805A

SPECIFICATIONS

MODULES:

DATA ACQUISITION SWITCH UNIT

E5813A

34970A data acquisition/switch unitIncludes operating and service manuals, calibration certificate, Quick Start package (Benchlink Data Logger software,RS-232 cable, thermocouple, screwdriver) and power cord. Modules must be purchased separately.

E5810A

POWERFUL FLEXIBILITY TO GET YOUR JOB DONE

82350B

Whether you need to measure temperature, AC/DC volts, resistance, frequency or current - mfg. part no. 34970A canhandle it. The internal autoranging DMM directly measures 11 different functions, eliminating the need for expensiveexternal signal conditioning. Each channel can be configured for maximum flexibility.

82357B


2192

9


DATA ACQUISITION • COMPONENT TESTERS • DECADE BOXES


ADC SERIES PC-BASED HIGH-PRECISION DATA LOGGERS (CONT.)

Mfg. Part No.

Total Resistance

(Ohms)Resolution

(Ohms) Decades Stock No.Price Each

1433-00 111.10 0.01 4 35K9899 1830.001433-02 1,111.0 0.1 4 35K9900 1750.001433-04 11,110 1 4 35K9901 1830.00

Mfg. Part No.

ResistanceMax.(Ω)

Resolution(Ω)

No. ofDecades Accuracy Stock No. Price Each

HPRS-F-6-1 1M 1 6 ±(1.0%+20mΩ) 35K8002 1599.00

Mfg. Part No.Inductance

Max. (H)Resolution

mH Accuracy Decades Stock No. Price EachLS-400 9.999 1 ±(2%+0.5 uH) 4 36K4128 1000.00LS-400A 0.999 1 ±(2%+0.5 uH) 3 36K4129 679.00

Mfg. Part No. Description Stock No. Price Each72-7265 Capacitance Decade Box 22H6398 73.95

Mfg. Part No. Description Stock No. Price Each72-7270 Resistance Decade Box 22H6397 63.95


1-472-965 Semiconductor Tester 52F8014 104.00

Mfg. Part No. Description Stock No. Price Each240C Power resistor decade box 62F730 1947.51

Mfg. Part No. Description Stock No. Price 1-99972-1025 Dual Display LCR Meter 01N4880 349.00

(32189)

GenRad 1433 HIGH PRECISION DECADE BOX

Mfg. Part Nos. ADC-20 ADC-20Voltage Ranges

±2500mV±1250mV

±2500mV±1250mV±625mV±312mV±156mV±78mV±39mV

Accuracy 0.2% 0.1% (±39mV to 1250mV Range)0.2% (±2500mV Range)

Digital I/O None 4-Bi-Directional (3.3V CMOS)Input Connector D25 Female

(103591)

(114925)(84984)

(74573)

(4125)

(74572)

• Accepted Industry Standard • Ranges from 0.01ohm to 111Megohm

available• 0.01% +/- 2milliohm Accuracy• TC as low as 3ppm/°C• Stability as high as 5ppm/yr • May be used for RTD Simulation

SEMICONDUCTOR TESTER

CAPACITANCE DECADE BOX

HPRS SERIES RESISTANCE DECADE BOXES

RESISTANCE DECADE BOX

DUAL DISPLAY LCR METER


ADC-20 8-Channel PC-Based High-Resolution DataLogger

02M0830 328.35

ADC-24 16-Channel PC-Based High-Resolution DataLogger

02M0832 658.35

ADC-20 SERIES TERMINAL BOARD Terminal Board for Connecting Sensors 02M0831 41.25

LS SERIES DIGITALINDUCTANCE DECADE BOXES

POWER RESISTOR DECADE BOX

Specifications:Test cycle: 4 quadrants. Maximum load: 15Ω. Audio tone: indicatesless than 20Ω. AC adaptor supplied, 9V battery not included.

Features

(89095)

Features

• Pocket Sized• Ideal for Service, Prototype and

Experimental Use• 1∼11, 111, 110 Ohms, in One Ohm

Increments• 28 Individual Slide Switches

• Dual display 20,000 count and 1,000 count• Multiple test frequencies• Selectable tolerance modes for sorting• Measurement Parameters: L, C, R, D, θ and Q• Auto/manual ranging• 0.3% basic accuracy• Parallel/series test modes• Data logging capability• Optically isolated RS-232 interface• Short/open calibration

• Pocket Sized• Ideal for Service, Prototype and

Experimental Use• 100pF∼11,111µF, in 100pF

Increments• 20 Individual Slide Switches

This useful tool may be set at any resistance value from 1 ∼ 11,111,110Ω, in 1Ω increments. 28 individual slideswitches allow the user to quickly and easily select resistor values. Wave soldered, two layer PC board utilizes highquality 1% tolerance 1/3W resistors. Maximum stray internal resistance is 1/3Ω. Color-coded binding posts provideresistor and ground connections. Passive device requires no power source. Dimensions: 53⁄4 (H) x 41⁄2 (W) x 11⁄4″ (D).

Features

Mfg. part no. 72-965 is a low-cost portable semiconductor tester designed for in and out of circuit testing on transistors,FETs, SCRs and diodes.

• High Performance• High Power

• Provides Any Ohmic Value in 1Ohm Increments From 1 to999,999 Ohms

• Power Rating of 225W @1000VDC

This useful tool may be set at any non-polarized capacitor value from 100pF ∼ 11,111µF, in 100pF increments. 20individual slide switches allow the user to quickly and easily select capacitance values. Wave soldered, two-layer PCboard utilizes high quality 5% tolerance mylar capacitors. Maximum internal residual capacitance is 50pF. Color-codedbinding posts provide capacitor and ground connections. Passive device requires no power source. Dimensions:5-3/4(H) x 41⁄2 (W) x 11⁄4″ (D).

Features:

Specifications

Features:

Applications

Specifications

1433 Series decade resistors are primarily intended for precision measurement applications where their excellentaccuracy, stability, and low zero resistance are important. They are convenient resistance standards for checking theaccuracy of resistance measuring devices and are used as components in dc and audio frequency impedance bridges.Many of the models can be used into the radio-frequency range.

• Resistance Range: 0.001Ω to 10 MΩ• Power Rating: 225 W/decade, 250 W

max.• Voltage Rating: 1000V• Accuracy: 0.5%

This highly precise LCR meter provides 20,000 count accuracy, dual display and discrete force and sense BNC probeinputs, for accurate measurement and sorting of components. Complete 48 page theory and instruction manualsupplied on disk.

• Auto Base or Gate Identifier• Tests Transistors, FETs, SCRs, and Diodes• Identifies NPN/PNP Transistors, N-Channel/P-Channel FETs,

and Silicon/Germanuim Diodes• Continuity Test: Audio Tone• 90-Day Warranty

• Resistance Determination• Load Resistance• Calibrating Meters

• Capacitance range: 200pF ∼ 10mF • Capacitance resolution: 0.01pF ∼ 0.01mF • Inductance range: 2000µH ∼ 1000H • Inductance resolution 0.1µH ∼ 0.1H • Dissipation Factor: .000∼999 Auto • Quality Factor: .000∼999 Auto • Θ Measurement: ±90° • Test Frequencies: 100Hz, 120Hz, 1KHz and 10KHz • Tolerance Mode: 1%, 5%, 10% and 20%• Dimensions: 2.80″ (H) x 10.25″ (W) x 8.31″



9



LOGIC PROBES • DECADE BOXES • CIRCUIT BOARD TEST

GenRad 1433 HIGH PRECISION DECADE BOX (CONT.)

Mfg. Part No.

Total Resistance

(Ohms)Resolution

(Ohms) Decades Stock No.Price Each

1433-10 1,111.10 0.01 5 71C9272 2295.001433-12 11,111.0 0.1 5 35K9906 2235.001433-14 111,110 1 5 35K9907 2235.001433-18 11,111,000 100 5 35K9909 3490.001433-19 1,111.110 0.001 6 35K9911 2595.001433-20 11,111.10 0.01 6 35K9912 2395.001433-22 111,111.0 0.1 6 35K9913 2495.001433-24 1.111 110 M 1 6 35K9914 2695.001433-26 11.111 100 M 10 6 35K9915 3595.001433-29 111,111.10 0.01 7 35K9918 2875.001433-31 1.111 111 0 M 0.1 7 35K9919 3180.001433-33 11.111 110 M 1 7 07H1998 3995.001433-41 111.111 111 110 M 0.001 11 35K9930 6495.00

Mfg. Part No.Capacitance

Max. (µF)Resolution

(pF) Accuracy Decades Stock No.Price Each

CS-300 99.99 100 ±(4%+3 pF) 6 35K7314 189.00CS-301 99.99 100 ±(1%+3 pF) 6 36K4127 349.00

(88740)

Mfg. Part No.Resistance

Max. (Mohms) Accuracy DecadesResolution

(Ohms) Stock No.Price Each

RS-200 9.999 ±(1%+25 mΩ) 7 1 29C8704 174.00RS-201 9.999 ±(0.1%+25 mΩ) 7 1 35K8913 324.00RS-200W 99.99 ±(1%+30 mΩ) 9 0.1 35K8912 324.00RS-201W 99.99 ±(0.1%+30 mΩ) 9 0.1 35K8914 539.00

Mfg. Part No. Description Stock No. Price 1-972-500 50MHz Logic Probe and Pulser 52F7960 34.38

Mfg. Part No.

ResistanceMax.(MΩ)

Resolution(Ω)

Accuracyunder 1kΩ

(Ω)

Accuracyover 1kΩ

(Ω) Stock No. Price EachOS-250 24 1 ohms ±1 0.1 % 70M8799 789.00OS-260 24 0.1 ohms ±0.5 0.1 % 70M8800 979.00

Mfg. Part No.

ResistanceMax.(MΩ)

Resolution(Ω)

Accuracyunder 5kΩ

(Ω)

Accuracyover 5kΩ

(Ω) Stock No.

Price Each

EachOS-270 1.5 0.01 ohms ±0.1 0.01 % 21M6260 1289.00

(84983)

(49179)

Mfg. Part No.ResistanceMax. (MΩ)

CapacitanceMax. (uF) Description Stock No. Price Each

RCS-500 9.999 999.9 Combines RS-200 and CS-300 36K4130 359.00RCS-502 9.999 999.9 Combines RS-201 and CS-301 36K4131 669.00

(103579)

Voltage Rating: 100 V (20 V for 10 - 100 µF)

(84981)

50MHz LOGIC PROBE AND PULSER

Features• Uses Real Resistors• Ideal For PT-100 and PT-1000 RTD Simulations• Microprocessor Controlled• Resistance Values Stored in Up to 10 mem

locations• Current Limiter to Prevent Possible Damage• Automatic Residual Resistance w/ No Zero

Subtraction Required

RS/RCS SERIESDIGITAL RESISTANCEDECADE BOXES

CS SERIES DIGITALCAPACITANCE DECADE BOXES

Simplifies troubleshooting digital circuits by combining a logic probe and pulser in one probe. Operating voltage:4VDC-18VDC. Maximum input signal frequency 50MHz. Input impedance: 120KΩ. TTL: Logic “1” > 3.0V ±.25V, Logic“0” < .75V ±.25V. CMOS: Logic “1” 60% VCC 5%; Logic “0” 15% VCC 5%. Pulser: sync input impedance: 1MΩ.Dimensions: 83⁄16 x 11⁄16″. Pulse rate: switchable 0.5pps or 400pps. Pulse width: 10sec. Minimum detectable pulsewidth: 10nsec.

Power Rating: 500 mW

OS SERIES DIGITALRESISTANCE DECADE BOXES

RCS SERIES

Specifications

RS SERIES

• Power Rating: 1W• Power Supply: 4 AA Batteries• RS-232 Interface

RS-201

Mfg. Part No. Fig.Dimensions (in.)

Tip DescriptionSpring Force Initial/

Final Oz. Stock No.Price Each

A B C D E 1-9 P2662AG-1C1S 1 .027 .580 .130 .021 .170 60° Contact 1-2.2 50F5567 26.22 P2662AG-1R1S 2 .027 .580 .130 .021 .170 Radius Contact 1-2.2 50F5568 26.22 P2662AG-2V1S 3 .027 .580 .130 .040 .170 120° Cup Contact 1-2.2 50F5570 26.52 S2662A-3ED 9 .022 .690 .041 .036 … Extended Socket … 84F969 41.08 P2662BG-1C1S 1 .027 .470 .105 .021 .145 60° Contact 1-2.2 50F5571 32.70 P2662BG-1R1S 2 .027 .470 .105 .021 .145 Radius Contact 1-2.2 50F5572 30.33

REPLACEABLE SPRING-LOADED POGO® CONTACTS AND SOCKETS

Fig. 1 Point Fig. 2 Radius Fig. 3 Cup Fig. 4 Waffle Fig. 5 Pyramid Fig. 6 Quadrifid Fig. 7 Tulip Fig. 8 Reduced Quadrifid

Fig. 9 Fig. 10 Fig. 11

probe body. Gold-plated contact body provides superior surface conditioning for consistently low contact resistanceover life (typically 1,000,000 cycles). Gold-plated plunger and socket. Stroke full/working: 0.125″. Sold in packages of10.

Pylon replaceable spring-loaded POGO® contacts provide high performance in testing and interconnect applicationsutilizing spring probe technology. Biasing-Ball construction maximizes wiping contact of plunger to inner diameter of

0.050″ CENTERLINE SPACING/3 AMPS MAX. ELECTRICAL RESISTANCE < 30Ω


2194

9


CIRCUIT BOARD TEST


REPLACEABLE SPRING-LOADED POGO® CONTACTS AND SOCKETS (CONT.)

(148856)

Mfg. Part No. Fig.Dimensions (in.)

Tip DescriptionSpring Force Initial/

Final Oz. Stock No.Price Each

A B C D E 1-9 P2662BG-1Q1S 6 .027 .470 .105 .021 .145 .021″ Quad Contact 1-2.2 50F5574 41.40 P2662BG-2V1S 3 .027 .470 .105 .040 .145 120° Cup Contact 1-2.2 50F5573 32.64 PR261-1 9 … .690 .037 .034 … Equiv. to S2662B 6ED (Solder Cup) … 91F7150 9.80 PR261-0 9 .021 .690 .037 .034 … Equiv. to S2662B 6ED (Crimp) … 91F7149 7.62

0.075″ CENTERLINE SPACING/3 AMPS MAX. ELECTRICAL RESISTANCE < 10Ω

P2663G-1P1S 5 .042 .670 .140 .060 .190 Pyramid Contact 1.5-4.2 50F5578 16.17 P2663G-1C1S 1 .042 .670 .140 .030 .190 60° Contact 1.5-4.2 84F964 19.55 P2663G-1R1S 2 .042 .670 .140 .030 .190 Radius Contact 1.5-4.2 50F5575 19.50 P2663G-1V1S 3 .042 .670 .140 .050 .190 120° Cup Contact 1.5-4.2 50F5576 18.98 P2663G-1W1S 4 .042 .670 .140 .060 .190 .060″ Waffle Contact 1.5-4.2 50F5577 19.50 S2663-1ED 9 .038 .760 .059 .054 … Extended Socket … 84F971 14.82

0.100″ CENTERLINE SPACING/5 AMPS MAX. ELECTRICAL RESISTANCE < 10mΩ

P2664G-1C1S 1 .054 .720 .125 .040 .185 60° Contact 1.9-4.5 50F5579 20.28 P2664G-1R1S 2 .054 .720 .175 .040 .235 Radius Contact 1.9-4.5 50F5583 20.28 P2664G-1W1S 4 .054 .720 .175 .070 .235 .070″ Waffle Contact 1.9-4.5 50F5580 22.62 P2664G-4V1S 3 .054 .720 .175 .070 .235 120° Cup Contact 1.9-4.5 50F5582 21.74 S2664-1ED 9 .047 .820 .073 .067 … Extended Socket … 84F972 30.21 S2664-2EWWD 10 … 1.33 .073 .067 … Extended Socket … 84F974 23.22 S2664-1ETD 11 … 1.050 .073 .067 … Extended Socket Rd Tail … 84F975 25.59 PR541-1 9 … .950 .070 .066 … Equiv. to S2664-1/2ED (Solder Cup) … 91F7155 10.66 P3158G-1Q1S 6 .054 720 .250 .060 .310 .060″ Quad Contact 2.5-8.5 50F5586 23.40 P3158G-1R1S 2 .054 .720 .250 .040 .310 Radius Contact 2.5-8.5 50F5587 22.43 P3158G-1V1S 3 .054 .720 .250 .070 .310 120° Cup Contact 2.5-8.5 50F5589 18.55 P3158G-1W1S 4 .054 .720 .250 .070 .310 .070″ Waffle Contact 2.5-8.5 50F5590 23.40 P3158G-2Q1S 8 .054 .720 .250 .040 .310 .040″ Reduced Quad 2.5-8.5 50F5591 25.22 P3158G-3C1S 1 .054 .720 .250 .040 .310 34° Contact 2.5-8.5 50F5585 27.82 P5160G-1Q1S 6 .054 1.000 .310 .060 .370 Quad Contact 2.5-8.5 84F967 16.99 P5160G-1R1S 2 .054 1.000 .310 .030 .370 Radius Contact 2.5-8.5 50F5594 20.31 P5160G-1V1S 3 .054 1.000 .310 .060 .370 120° Cup Contact 2.5-8.5 50F5592 16.99 P5160G-2C1S 1 .054 1.000 .310 .040 .370 60° Contact 2.5-8.5 50F5593 16.99 P5160G-2W1S 4 .054 1.000 .310 .060 .370 .060″ Waffle Contact 2.5-8.5 84F966 20.54 P5160G-3C1S 1 .054 1.000 .310 .040 .370 34° Contact 2.5-8.5 84F965 22.08 P5160G-3P1S 5 .054 1.000 .310 .060 .370 Pyramid Contact 2.5-8.5 50F5596 17.06 P5160G-4Q1S 8 .054 1.000 .310 .040 .370 .040″Reduced Quad 2.5-8.5 50F5595 13.65 S5160-1ED 9 .047 1.100 .073 .067 … Extended Socket … 50F5606 9.97 PR54-1 9 … 1.190 .072 .066 … Equiv. to S5160-1ED (Solder Cup) … 91F7152 10.37 PR54-2 10 … 1.570 .072 .066 … Equiv. to S5160-1/3EWWD … 91F7153 9.66


P2665G-1C1S 1 .080 .960 .330 .066 .420 60° Contact 1.4-3.8 50F5609 25.19 P2665G-1P1S 5 .080 .960 .330 .098 .420 Pyramid Contact 1.4-3.8 50F5613 31.87 P2665G-1R1S 2 .080 .960 .330 .066 .420 Radius Contact 1.4-3.8 50F5611 25.19 P2665G-1V1S 3 .080 .960 .330 .090 .420 120° Cup Contact 1.4-3.8 50F5612 25.19 P2665G-1W1S 4 .080 .960 .330 .090 .420 .090″ Waffle Contact 1.4-3.8 50F5610 25.45 PR80-1 9 … 1.200 .098 .093 … Equiv. to S2665-6ED (Solder Cup) … 91F7159 11.81


P2757G-1C1S 1 .116 .890 .320 .098 .410 60° Contact 2.0-5.0 50F5615 37.53 P2757G-1R1S 2 .116 .890 .320 .120 .410 .120″ Radius Contact 2.0-5.0 50F5617 37.53 P2757G-3W1S 4 .116 .890 .320 .122 .410 .122″ Waffle Contact 2.0-5.0 50F5616 39.33 S2757-2ED 9 .055 1.053 .138 .133 … Extended Socket … 84F976 18.72

(3818)



9


CIRCUIT BOARD TEST


NON-REPLACEABLE SPRING-LOADED POGO® CONTACTS

SPR-5W IP125, P2665 AAS

AS, CS, ES, FS, P2550, P2532 Low-OHM ″The Brute″Constructed of an outer tubular body and an inner spring-loaded plunger. Contacts have rugged, 1-piece machinedbodies. Materials: gold-plated barrel. For applications in test and interface assemblies where multiple connections mustbe made. Sold in packages of 10.0.050″ CENTERLINE/0.030″ TRAVEL—MAX. CURRENT 2 AMPS*A-S solder pot termination (diameter 0.025 x 0.045″ DP). Gold-plated plunger and socket. A-A-S solder pot termination(diameter 0.022 x 0.050″ DP). Gold-plated plunger and socket.

Mfg. Part No.Dimensions Tip

DescriptionSpring Force Initial/

Final Oz. Stock No.Price per Pkg.

A B C D E 1-9 A-S-C 0.035″ 0.200″ 0.030″ 0.014″ 0.037″ 60° Point 0.7-1.6 46F3775 28.98 A-S-R 0.035″ 0.200″ 0.030″ 0.014″ 0.037″ Radius 0.7-1.6 46F3776 26.99 A-A-S-C 0.030″ 0.280″ 0.030″ 0.021″ … 60° Point 0.5-2.5 89F1446 36.99 A-A-S-R 0.030″ 0.280″ 0.030″ 0.021″ … Radius 0.5-2.5 95F8680 34.44

0.075″ CENTERLINE/0.045″ TRAVEL—MAX. CURRENT: 5 AMPS*Solder pot termination (diameter 0.027 x 0.080″ DP). Gold-plated plunger and socket.

C-S-C 0.042″ 0.350″ 0.045″ 0.026″ 0.045″ 60° Point 0.5-4.6 46F3777 34.44 C-S-R 0.042″ 0.350″ 0.045″ 0.026″ 0.045″ Radius 0.5-4.6 46F3778 34.44

0.100″ CENTERLINE/0.065″ TRAVEL—MAX. CURRENT: 5 AMPS*Solder pot termination (diameter 0.046 x 0.100″ DP). Gold-plated plunger.

E-S-C 0.062″ 0.430″ 0.065″ 0.045″ 0.065″ 60° Point 1.5-3 46F3779 40.66 E-S-F 0.062″ 0.430″ 0.065″ 0.045″ 0.065″ 0.045″Flat 1.5-3 94F061 40.58 E-S-R 0.062″ 0.430″ 0.065″ 0.045″ 0.065″ Radius 1.5-3 46F3781 37.78 E-S-V 0.062″ 0.430″ 0.115″ 0.090″ 0.065″ 120° Cup 1.5-3 95F8681 40.66 E-S-W 0.062″ 0.430″ 0.110″ 0.070″ 0.065″ 0.070″ Waffle 1.5-3 46F3780 40.10


F-S-C 0.066″ 0.680″ 0.100″ 0.045″ 0.085″ 60° Point 2-8 94F3339 70.66 F-S-W 0.066″ 0.680″ 0.154″ 0.090″ 0.085″ 0.090″ Waffle 2-8 46F3782 72.32

0.125″ CENTERLINE/3.8″ TRAVEL—MAX. CURRENT: 7 AMPS*Electrical resistance: <10mΩ. Maximum curent: 7 amps. Plunger travel: .250″ (6.35). Gold plated plunger.

P2665G-1W1B 0.080″ 1.290″ 0.330″ … … Waffle 1.5 - 3.0 99F3939 3.270.156″ CENTERLINE/0.139″ TRAVEL—MAX. CURRENT: 5 AMPS*Solder pot termination (diameter 0.062 x 0.110″ DP). Gold-plated plunger and socket.

P2532-1 0.088″ 0.673″ 0.139″ 0.059″ 0.093″ Radius 1-3 46F3784 37.53 P2532-2 0.088″ 0.673″ 0.139″ 0.059″ 0.093″ 60° Point 1-3 94F3341 40.37


P2550-9 0.120″ 1.078″ 0.320″ 0.125″ 0.125″ 0.125″ Waffle 1-4 46F3789 57.410.187″ CENTERLINE/0.250″ TRAVEL—MAX. CURRENT: 7 AMPS*Probe resistance 50mΩ, with a standard deviation of <7mΩ @ 25mA test current.

P2757G2W1B 0.116″ 0.89″ 0.320″ … … 0.250″ Waffle 1.5 - 3.0 66F6076 49.68 P2757G3W1B 0.116″ 0.89″ 0.320″ … … 0.122″ Waffle 1.5 - 3.0 66F6077 41.57

0.187″ CENTERLINE/0.250″ TRAVEL—MAX. CURRENT: 8 AMPS*Probe resistance 50mΩ, with a standard deviation of <7mΩ @ 25mA test current.

SPA-5H† 0.125″ 1.42″ 0.100″ … … 0.156″ Waffle 6.13 - 16.0 90B6889 6.65 SPR-5W† 0.140″ 1.32″ 0.93″ 0.79″ … Crimp or Push-On

Termination6.13 - 16.0 94B3765 2.79

LOW-OHM SERIES (<10mΩ)—MAX. CURRENT: 10 AMPS*Mfg. part no. P2447 0.300″ travel; mfg. part no. P3325 0.100″ travel. Low resistance is achieved by making POGO® plunger and terminal in a single unit and eliminating the resistance of spring and body. Mfg. part no. P2447 has nickel-platedplunger; mfg. part no. P3325 has gold-plated plunger.

P2447-1W 0.153″ 0.700″ 0.445″ 0.187″ 0.156″ 0.187″ Waffle 6-18 94F063 114.21 P3325-0 0.082″ 0.545″ 0.100″ 0.061″ 0.085″ Radius 5-10 95F8684 33.93 P3325-1 0.082″ 0.545″ 0.150″ 0.090″ 0.085″ 120° Cup 5-10 95F8685 46.76

“THE BRUTE” (<5mΩ)/0.250″ TRAVEL—MAX. CURRENT: 25 AMPS*Gold-plated plunger and socket.

P4301-1F 0.187″ 1.500″ 0.250″ 0.154″ … Flat 16-32 98F2365 110.72*Continuous; † Sold individually(3820)


2196

9


CIRCUIT BOARD TEST


SPRING CONTACT PROBES—0.050″(SIZE S0) CENTERLINE SPACING

(148859)

Mfg. Part No. Dimension A Tip Style Stock No.Price Each

1-9 10-24 S-2-A-4-G 0.075″ 90° Cup 30C4649 10.17 8.67 S-2-B-4-G 0.040″ 30° Spear Point 30C4650 10.17 8.67 S-2-D-4-G 0.050″ Spherical Radius 30C4651 10.17 8.67 S-2-E-4-G 0.075″ 90° Convex 30C4652 10.17 8.67 S-2-H-4-G 0.075″ Waffle 30C4653 10.17 8.67

3A continuous current. Working stroke: 0.100″. Full stroke: 0.160″. Spring force: 7.0 oz. @ 0.100″ rated travel.

S-2-A-7-G 0.075″ 90° Cup 90F2893 10.53 7.60 S-2-B-7-G 0.040″ 30° Spear Point 90F2894 10.53 7.60 S-2-E-7-G 0.075″ 90° Convex 90F2895 10.53 7.60 S-2-H-7-G 0.075″ Waffle 90F2896 10.53 7.60

SOCKETS—0.100″ (SIZE 2) CENTERLINE SPACING

R-2-CR* … Crimp 30C4617 3.47 2.96 R-2-SC* … Solder Cup 30C4618 4.62 3.94 R-2-WW-429* 1.359″ Wire Wrap Sq. Post 30C4619 4.62 3.94


1-9 10-24 S-075-A-3-G 0.048″ 90° Cup 98H1374 14.79 12.61 S-075-B-3-G 0.025″ 30° Spear Point 98H1375 14.79 12.61 S-075-H-3-G 0.048″ Waffle 98H1376 14.79 12.61 S-075-J-3-G 0.025″ Spherical Radius 98H1377 14.79 12.61 S-075-T-3-G 0.048″ 60° Chisel 98H1378 14.79 12.61


R-075-CR* … Crimp 45J3541 7.92 7.02 R-075-SC* … Solder Cup 45J3542 10.32 9.15 R-075-WW-429* 1.599″ Wire Wrap Sq. Post 45J3543 12.73 11.29

Spring Contact Probe


1-9 10-24 S-1-A-3.8-G 0.060″ 90° Cup 30C4644 9.94 8.48 S-1-B-3.8-G 0.026″ 30° Spear Point 30C4645 9.94 8.48 S-1-E-3.8-G 0.060″ 90° Convex 30C4646 9.94 8.48 S-1-H-3.8-G 0.060″ Waffle 30C4647 9.94 8.48 S-1-J-3.8-G 0.026″ Spherical Radius 30C4648 9.94 8.48 S-1-K-3.8-G 0.060″ 45° Chisel 30C5429 9.94 8.48


R-1-CR/ R-SS-75-CR* … Crimp 30C4614 3.47 2.96 R-1-SC / R-SS-75-SC* … Solder Cup 30C4615 5.09 4.34 R-1-WW-429* 1.124″ Wire Wrap Sq. Post 30C4616 5.32 4.54

(74925)

(74910)

(74911)

Wire Wrap Socket

3A continuous current. Working stroke: 0.170″. Full stroke: 0.250″. Spring force: 3.0 oz. @ 0.170″ rated travel. Sold inpackages of 10.




* Mounting hole size: 0.055″/0.057″; Drill size: 1.45mm



*Mounting hole size 0.068″/0.070″; Drill size #50

SPRING CONTACT PROBES —0.075″ (SIZE S075) CENTERLINESPACING


1-9 10-24 S-0-A-2.2-G-660 0.156″ 90° Cup 30C4637 14.10 12.02 S-0-B-2.2-G 0.021″ 30° Spear Point 30C4638 14.10 12.02 S-0-E-2.2-G 0.035″ 90° Convex 30C4639 14.10 12.02 S-0-H-2.2-G 0.035″ Waffle 30C4640 14.10 12.02 S-0-J-2.2-G 0.021″ Spherical Radius 30C4641 14.10 12.02 S-0-T6-2.2-G 0.035″ 60° Chisel 30C4642 14.10 12.02 S-0-U-2.2-G 0.021″ 4-Point Crown 30C4643 14.10 12.02


R-0-CR* … Crimp 30C4612 3.24 2.76 R-0-SC / R-SS-50-SC* … Solder Cup 30C4613 5.32 4.54

* Mounting hole size 0.055″/0.057″; Drill size 1.45mm


*Mounting hole size 0.035″/0.0365″; Drill size #64



Wire Wrap Socket

Wire Wrap Socket

Wire Wrap Socket

(74909)



9


CIRCUIT BOARD TEST


SPRING CONTACT PROBES—0.125″ (SIZE S3) CENTERLINE SPACING (CONT.)


1-9 10-24 S-100-A-3.5-G 0.060″ 90° Concave 97H7042 9.71 8.28 S-100-B-3.5-G† 0.036″ 30° Spear Point 98H1470 9.71 8.28 S-100-D-3.5-G† 0.050″ Spherical Radius 98H1471 9.71 8.28 S-100-H-3.5 G† 0.060″ Serrated 30C4659 9.71 8.28 S-100-J-3.5-G† 0.036″ Spherical Radius 45J3549 14.45 12.81 S-100-K-3.5-G† 0.060″ Chisel 45J3550 14.45 12.81 S-100-T-3.5-G† 0.060″ 60° Chisel 98H1476 9.71 8.28 S-100-U-3.5-G† 0.036″ 4 Point Crown 98H1477 12.02 10.25 S-100-W-3.5-G† 0.050″ 4 Point Crown 98H1478 9.71 8.28

3A continuous current. Working stroke: 0.170″. Full stroke: 0.250″. Spring force: 6.7 oz. @ 0.170″ rated travel. Nobifurcated beams.

S-100-B-6.7-G† 0.036″ 30° Spear Point 88H4366 9.71 8.28 S-100-H-6.7-G† 0.060″ Serrated 98H1474 9.71 8.28 SH-100-H-6.7-G† 0.060″ Waffle 45J3552 3.44 3.05 S-100-W-6.7-G† 0.050″ 4 Point Crown 98H1479 9.71 8.28 S-100-Y-6.7-G-S† 0.055″ Tulip 98H1480 12.02 10.25 S-100-A-6.7-G† 0.060″ Cup 45J3548 14.45 12.81


R-100-CR* … Crimp 45J3544 5.16 4.58 R-100-SC* … Solder Cup 45J3545 6.54 5.80 R-100-WW-429* 1.594″ Wire Wrap Sq. Post 45J3546 5.85 5.19 RH-100-SC* … Solder Cup 45J3547 9.29 8.24


1-9 10-24 S-3-A-4-G 0.100″ 90° Cup 30C4666 15.94 13.60 S-3-B-4-G 0.067″ 30° Spear Point 30C4668 15.94 13.60 S-3-J-4-G 0.067″ Spherical Radius 30C4674 15.94 13.60 S-3-E-4-G 0.100″ 90° Convex 30C4670 15.94 13.60 S-3-H-4-G 0.100″ Waffle 30C4672 15.94 13.60

5A continuous current (SH series 27A). Working stroke: 0.170″. Full stroke: 0.250″. Spring force: 7.0 oz. @ 0.170″ ratedtravel.

S-3-A-7-G 0.100″ 90° Cup 30C4667 15.94 13.60 S-3-B-7-G 0.067″ 30° Spear Point 30C4669 15.94 13.60 S-3-J-7-G 0.067″ Spherical Radius 30C4675 15.94 13.60 S-3-E-7-G 0.100″ 90° Convex 30C4671 15.94 13.60 S-3-H-7-G 0.100″ Waffle 30C4673 15.94 13.60 SH-3-H-7-G 0.100″ Waffle 30C5426 27.49 23.45


R-3-CR* … Crimp 30C4623 6.24 5.32 R-3-SC* … Solder Cup 30C4624 7.63 6.51



1-9 10-24 R-3-WW-429* 1.646″ Wire Wrap Sq. Post 30C4625 8.78 7.49 RH-3-SC* … Solder Cup 30C5422 16.17 13.79

(74927)

(74926)




1-9 10-24 S-4-A-5-G** 0.156″ 90° Cup 30C4676 20.79 17.73 S-4-B-5-G 0.078″ 30° Spear Point 30C4678 20.79 17.73 S-4-D-5-G 0.090″ Spherical Radius 30C4680 20.79 17.73 S-4-H-5-G 0.156″ Waffle 30C4682 20.79 17.73

5A continuous current (SH series 32A. Spring force: 10.0 oz. @0.170″ rated travel). Working stroke: 0.170″. Full stroke:0.250″. Spring force: 7.0 oz. @ 0.170″ rated travel.

S-4-A-7-G** 0.156″ 90° Cup 30C4677 20.79 17.73 S-4-B-7-G 0.078″ 30° Spear Point 30C4679 20.79 17.73 S-4-D-7-G 0.090″ Spherical Radius 30C4681 20.79 17.73 S-4-H-7-G** 0.156″ Waffle 30C4683 31.59 16.64 SH-4-H-10-G 0.156″ Waffle 30C5427 37.20 31.72


R-4-CR ... Crimp 24C0337 6.24 5.32 R-4-SC ... Solder Cup 30C4626 7.63 6.51 RH-4-SC ... Solder Cup 30C5423 18.95 16.16

* Mounting hole size 0.068″/0.070″; Drill size #50; †Steel Option; ‡Steel

5A continuous current. Working stroke: 0.170″. Full stroke 0.250″. Spring force: 4.0 oz. @ 0.170″ rated travel. Sold inpackages of 10.

Mfg. Part No.Spring ForceRated Stroke

RatedTravel Stock No.

Price per Pkg.1-9 10-49

100785-003-922** 1.5 oz. 0.06″ 05N1437 23.92 21.42


* Mounting hole size 0.0948″/0.0960″; Drill size #41

Mfg. Part No.Spring Force

@ SwitchTravel

@ Switch Rated Travel Stock No.Price per pkg.

1-9 SW-3-CS-1.8G** 1.8 oz. 0.025″ 0.197″ 05N1432 91.86 SW-4-C-4.4-E/N** 4.4 oz. 0.107″ 0.12″ 05N1433 158.79 SW5F4.0EN147** 4 oz. 0.03″ 0.137″ 05N1435 88.24 SW5F4.0EN115** 4 oz. 0.03″ 0.137″ 05N1434 88.24



(74930)

Wire Wrap Socket

Wire Wrap Socket

CONTACT PROBES


* Mounting hole size 0.110″; Drill size #35. ** 0.187″ centers


SEMICONDUCTOR PROBESSold in packages of 10.

SWITCH PROBESA Switch Probe is a spring contact probe and receptacle combination that is normally open, and after a designated travelthe switch probe closes. The most common use for switch probes is in the cable harness testing industry. The switchprobe is used to verify the correct location of a terminal in a connector while checking the retention force as well. Switchprobes also verify the presence of nonconductive components such as caps for connectors or devices on a circuitboard.There are two separate current paths in a switch probe. From the plunger tip to the tail is normally open and closes onlyafter the probe deflects to the designated travel. The second path, from the plunger tip to the outside of the receptacle, isalways closed. Sold in packages of 10.

SPRING CONTACT PROBESSemiconductor Probe SW-4-C-4.4-E/N SW5F4.0ENSW-3-CS-1.8G


2198

9


CIRCUIT BOARD TEST


(147434)

See Enclosures, Boxes & Racks. on p.2260

1.070

.350

.125 A

.300.144

A

.140


1-9 10-24 S5A16.4G 0.156″ 90° Cup 30C4684 30.27 25.81 S5B16.4G 0.110″ 30° Spear Point 30C4685 28.65 24.43 S5H16.4G 0.156″ Waffle 30C4686 28.65 24.43 SH5H18.7G 0.156″ Waffle 30C5428 37.89 32.31


R5CR* … Crimp 30C4628 12.25 10.45 R5SC* … Solder Cup 30C4629 13.86 11.82 R-5-WW-429* 1.724″ Wire Wrap Sq. Post 30C4630 14.56 12.42 RH5SC* … Solder Cup 30C5424 20.79 17.73

(74931)



* Mounting hole size 0.141″/0.143″; Drill size 9⁄64

Mfg. Part No.ShieldingPlunger Termination

Max.Travel(inch.)

SignalConductor

SpringForce(oz.) Stock No.

Price Each

1-9 100290-B-B-F-N Non Serrated Double ended 0.09 1.6 45J3493 41.83 100290-B-B-F-S Serrated Double ended 0.09 1.6 45J3494 41.83 100445-B-F-N-12-AM Non Serrated SMA Male 0.09 1.6 45J3498 71.68 100445-B-F-N-12-NC Non Serrated ... 0.09 1.6 45J3499 56.24

WAFFLE TIP

100290-H-H-F-N Non Serrated Double ended 0.075 2 45J3495 41.83 100290-H-H-F-S Serrated Double ended 0.075 2 45J3496 41.83 100445-H-F-S-12-AM Serrated SMA Male 0.075 2 45J3500 71.68 100445-H-F-S-12-NC Serrated SMA Male 0.075 2 45J3501 56.24

90° CONICAL TIP

100563-E* ... SMB Male 0.17 2.3 45J3502 100.52


(82547)

Wire Wrap Socket

COAX PROBES

The Coax Probe is the unique arrangement of a spring loaded signal plunger continuously surrounded by a ground plane.This ground plane can be continued onto the Device Under Test (DUT) via independently spring loaded shielding plunger.The coax probe maintains matched impedence and dielectric constant throughout. It allows interconnection with theleast amount of signal deterioration while providing simple connect/disconnect features. These Coax probe packs areused for signal frequencies 3GHz and higher at -1dB insertion loss.

Mfg. Part No.Tip Style

(Top/Bottom)

Spring ForceRated Stroke

(oz.) Travel Stock No.

Price Each1-9

100410-005 ... 6.2 0.060″ 45J3497 10.40 100891-002-922 ... 9.0 0.067″ 45J3503 10.02 101050-003 ... 2.3 0.060″ 45J3508 8.13 100938-001 4 Point Crown / 4-Point Crown 1.1 0.038″ 45J3504 32.89 100938-014 4 Point Crown / Spherical Radius 1.1 0.038″ 45J3505 32.89 100938-020 4 Point Crown / 30° Spear Point 1.1 0.038″ 45J3506 32.89 100938-016 Spherical Radius / Spherical Radius 1.1 0.038″ 45J3507 32.89 101111-008 Spherical Radius 1.5 0.022″ 05N1438 74.78 101119-001 Spherical Radius 6.2 0.060″ 05N1439 27.14 100671-000 Spherical Radius 5.1 0.027″ 05N1436 32.37 DE-50-D-2-G Spherical Radius / Spherical Radius 2.0 0.080″ 45J3490 12.67 DE-50-T45-2-G 3 Sided Chisel / Spherical Radius 2.0 0.080″ 45J3491 12.67 DE-50-T60-2-G 3 Sided Chisel / Spherical Radius 2.0 0.080″ 45J3492 12.67 DE-100-T-3-G 3 Sided Chisel / Spherical Radius 3.0 0.080″ 45J3489 16.07 DE-100-J-3-G Spherical Radius / Spherical Radius 3.0 0.080″ 45J3488 16.07

Shielding Plunger

(82937)

Signal Conductor

BATTERY CONTACT ANDINTERCONNECT PROBES

100290

Battery Contact and/or Interconnect probes are designed to optimize contact performance in high reliability multiplecycle applications. These probes are very reliable, compact, durable and provide an extremely high cycle life, even in theharshest environments. Positive internal contact can be insured by various self-biasing techniques, and contactresistance can be reduced to as little as 10 milliohms. Current ratings of 5A are typical of this series. Sold in packs of 10.

100445

100410

100563

100891

• Shielding plunger spring force: 4.3oz.• Working travel: 0.07″

101050

*Shielding plunger spring force: 5.8oz; Working travel: 0.107″.

100938

30° SPEAR POINT TIP

DE-50 DE-100



9

Find the Latest Technologies Online HAND HELD TEST EQUIPMENT

HAND HELD OSCILLOSCOPES


FLUKE-190 SERIES SCOPEMETER® HAND-HELD OSCILLOSCOPES (CONT.)

(148858)

Mfg. Part No. U1602A U1604ABandwidth 20MHz 40MHzChannel 2Vertical Resolution 8 bitsMultimeter Functions 6000-Count, True rms, VDC, VAC, V DC + AC, Current, Temperature,

Humidity, Pressure, Resistance, CapacitanceDual Waveform Math Ch1+Ch2, Ch1-Ch2, Ch2-Ch1Trigger Modes Edge, Pulse, Pattern, VideoCursor Modes Voltage (Y Cursor), Time (X Cursor)Automatic VoltageMeasurements

Peak-to-Peak, Max., Min., Amplitude, Top, Base, Mean, Cycle Mean,RMS (DC), Preshoot, +Overshoot, -Overshoot

Automatic Time Measurements Frequency, Period, +Width, -Width, Rise Time, Fall Time, Phase, DelayFFT ... Rectangular, Hanning, Hamming,

Black-Harris

Mfg. Part No. Description Stock No. Price EachFLUKE-196C/003 100MHz Color ScopeMeter 39C2817 3135.00FLUKE-196C/003S 100MHz Color ScopeMeter with

SCC190 Kit39C2818 3565.00

FLUKE-199C/003 200MHz Color ScopeMeter 39C2819 3475.00FLUKE-199C/003S 200MHz Color ScopeMeter with

SCC190 Kit39C2767 3950.00

CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORTAll other models available calibrated with printed certification and data report; go online or call..

FLUKE-199C/003 CALIBRATED Calibrated 200MHz Color Scopemeter 57K9817 3585.00FLUKE-199C/003S CALIBRATED Calibrated 200MHz Color Scopemeter

with SCC 190 kit57K9818 4060.00

ACCESSORIES

AS-200-R Probe Acccessory Set, Red 25C3159 71.00AS-200-G Probe Accessory Set, Gray 25C3158 71.00VPS200-R 10:1 Voltage Probe Set, 200MHz, Red 24C5369 177.00VPS200-G 10:1 Voltage Probe Set , 200MHz, Gray 24C6393 177.00

ACCESSORIES

Mfg. Part No. Description Stock No. Price EachVPS121 1:1 Voltage Probe Set: 12MHz 25C5825 177.00VPS100 100:1 Voltage Probe Set: 100MHz 25C0386 348.00VPS201 100:1 Voltage Probe Set, 200MHz 24C6395 348.00VPS250 2.5m Voltage Probe Set, 75MHz 25C1610 348.00RS200 Voltage Probe Replacement Set 25C6529 91.00CS20MA Current Shunt 4-20mA 93B8021 75.00BP190 Rechargeable NiMH Battery Pack for

190 Series ScopeMeter93B7966 131.00

PM9080/101 Optically Isolated-to-RS-232 InterfaceAdapter and Cable

39C2821 167.00

PAC91 Serial-to-Parallel Printer Adapter Cable 16F6993 253.00SW90W/034EFG FlukeView ScopeMeter Software 35C5189 242.00C195 Softside Carrying Case for 190 Series

ScopeMeters93B7962 141.00

C190 Hardside Carrying Case for 190 SeriesScopeMeters

93B7955 157.00

SCC190EFG C190 Hardside Carrying Case,FlukeView ScopeMeter Software andOptically-Isolated Serial Interface USBAdapter/Cable

97B9565 465.00

Mfg. Part No. Description Stock No. Price EachU1602A 20MHz Hand-Held Digital Oscilloscope 04M7403 1358.00U1602A-001 20MHz Hand-Held Digital Oscilloscope with USB Host 04M7404 1509.00U1604A 40MHz Hand-Held Digital Oscilloscope 04M7405 1695.00U1604A-001 40MHz Hand-Held Digital Oscilloscope with USB Host 04M7406 1846.00

ACCESSORIESMfg. part nos. U1560A, U1561A, and U1562A scope test probes include ground lead with mini-alligator clip andhook-clip for probe tip.

Mfg. Part No. Description Stock No. Price EachU1560A 1:1 Scope Test Probe, Rated X1 CAT III 300V 04M7396 151.00U1561A 10:1 Scope Test Probe, Rated X10 CAT III 600V 04M7397 151.00U1562A 100:1 Scope Test Probe, Rated X100 CAT III 600V 04M7398 151.00U1580A Digital Multimeter Test Lead Probes — 1-Pair 04M7400 25.20U1571A 4500mA NiMH Battery Pack 04M7399 69.53U1590A Softside Carrying Case 04M7402 60.47

(48582)

(89361)

FLUKE-190 SERIES SCOPEMETER®

HAND-HELD OSCILLOSCOPES

For the more demanding applications, FLUKE-190 series ScopeMeter® high-performance oscilloscopes are ideal forengineers who need the capabilities of a high-performance oscilloscope in a hand-held, battery powered instrument. AllFLUKE-190 series ScopeMeter® models come complete with mfg. part no. BC190 battery charger/line voltageadapter, mfg. part no. BP190 NiMH battery pack, mfg. part no. TL75 hard point test lead set, mfg. part no. VPS200-Ggray voltage probe, mfg. part no. VPS200-R red voltage probe, Getting-Started guide, and user manual on CD. Inaddition, models with SCC190 kit includes: mfg. part no. C190 hardside carrying case, serial interface cable and mfg.part no. SW90W FlukeView® ScopeMeter® software for Windows®.

U1600 SERIES HAND-HELD DIGITALOSCILLOSCOPES

Mfg. Part No. Description Stock No. Price EachFLUKE-123/003 20MHz ScopeMeter® 16F6982 1385.00FLUKE-123/003S 20MHz ScopeMeter® with SCC120E Kit 16F6983 1715.00FLUKE-124/003 40MHz ScopeMeter® 29H4613 1715.00FLUKE-124/003S 40MHz ScopeMeter® with SCC120E Kit 26H5462 1999.00FLUKE-125/003 40MHz ScopeMeter® 30M9563 1990.00FLUKE-125/003S 40MHz ScopeMeter® with SCC120E Kit 30M9564 2318.00


FLUKE-123/003 CALIBRATED Calibrated 20MHz ScopeMeter® 57K9810 1495.00FLUKE-123/003S CALIBRATED Calibrated 20MHz ScopeMeter® with

SCC120E Kit57K9811 1825.00

ACCESSORIES

BP120MH Rechargeable Battery Pack 73K7383 86.00C120 Hardside Carrying Case for 120 Series

ScopeMeters16F6984 66.00

C125 Softside Fabric Meter Case 16F6985 32.00SCC120E C120 Hardside Carrying Case, FlukeView

Software and Interface Cable for 120 SeriesScopeMeters

33B1938 333.00

• Maximum 200MSa/s real time sampling, one channel• Maximum 100MSa/s, using both channels simultaneously• 2.5GSa/s repetitive sampling • 11,100 points maximum recording length• 4.5″ color LCD display• FFT• Waveform math• Waveform zoom function

(19030)

Analog Scope• Frequency Spectrum Analysis Using FFT (FLUKE-190C Series)• Fast Display Update Rate for Seeing Dynamic Behavior Instantaneously• Automatic Capture and Replay of 100 Screens• 27,500 Points Per Input Record Length Using ScopeRecord Mode• TrendPlot™ Paperless Chart Recorder For Trend Analysis Up to 22 Days

Mfg. part nos. U1602A and U1604A digital oscilloscopes combine bench perform-ance with hand held convenience. All models come complete with mfg. part nos.U1560A and U1561A scope test probes, mfg. part no. U1580A DMM test leads,USB cable, power cord and AC adapter, mfg. part no. U1571A 4500mA NiMHbattery pack, Quick-Start guide, CD (which includes PC Link application softwareand manuals), and test report. Order additional accessories separately below.

FLUKE-120 SERIESTHREE-IN-ONESIMPLICITYSCOPEMETER® HAND-HELD OSCILLOSCOPES

• Speed, Performance and Analysis Power• Dual Input - 60, 100 or 200MHz Bandwidth• Up to 2.5GS/s Real-Time Sampling Per Input• Increased Waveform Acquisition Memory Depth of 3k Point Per Input• Connect-and-View™ Automatic Triggering, Full-Range Manual Trigger

Modes• Advanced Trigger Function (FLUKE-190C Series)• Digital Persistence for Analyzing Complex Dynamic Waveforms Like on an

• Dual-Input 40MHz or 20MHz Digital Oscilloscope• 5,000 Count True-RMS Digital Multimeters• Dual-Channel TrendPlot™ Recorder• Connect-and-View™ Trigger Simplicity for Hands-Off Operation• 10:1 Voltage Probe Included for Reduced Circuit Loading• Optically-Isolated RS-232 Interface• Meets 600V CAT III Safety Standards (IEC 1010-1)• UL listed, CSA certified• Recommended accessories - C125 Case, TL220 Test Lead Set,

i200s Current Clamp

SPECIFICATIONS

• Up to 1000V Independently Floating Isolated Inputs

Compact FLUKE-120 series Scopemeter® is the rugged solution for industrial troubleshooting and installation jobs inmachinery, instrumentation, control and power systems. It’s an integrated test tool with oscilloscope, paperless datarecorder and DMM functions. You can use one and the same set to test leads for waveform display, multiple meterreadings, capacitance and resistance measurements, and continuity checking. There is no need to swap leads.

U1602A

• Waveform Reference for Visual Comparisons and Automatic Pass/Fail testing of Waveforms• Vpwm Function for Motor Drive and Frequency Inverter Applications• Four Hours Rechargeable NiMH Battery Pack• Recommended accessories - C195 Case, DP120 Differential Probe, i1000s Current Clamp

Mfg. part no. FLUKE-125 has all of the features of mfg. part no. FLUKE-124 plus network bus health test, power andharmonics measurement, RPM reading and low resistance readings.


2200

9

Find Datasheets OnlineHAND HELD TEST EQUIPMENT

HAND HELD OSCILLOSCOPES • DIGITAL MULTIMETERS


FLUKE-233 TRUE-RMS, WIRELESS REMOTE DISPLAY DIGITALMULTIMETER (CONT.)


1-472-6920 Multifunction Digital Storage Oscilloscope 36C3019 479.27

Mfg. Part No. FLUKE-233Functions: Min/Max/Average, Hold, Auto, Manual Range, Continuity/DiodeTemperature: -40°C to +400°CPower: 5 AA Batteries for 200-Hrs. of Battery LifeWireless Frequency: 2.4GHzSafety Rating: CAT III 1000V, CAT IV 600V

Mfg. Part No. FLUKE-233Counts: 6000Voltage: 0.1mV to 1000V AC/DCCurrent: 0.1mA to 10A AC/DCResistance: 0.1Ω to 40MΩCapacitance: 1000nF to 9999µFFrequency: 0.1Hz to 50kHz

(68940)

Mfg. Part No. Description Stock No. Price EachMS420 20MHz Dual Channel Digital Oscilloscope 71P2411 899.00MS460 60MHz Dual Channel Digital Oscilloscope 10R0436 1599.00

MULTIFUNCTION DIGITALSTORAGE OSCILLOSCOPES

Mfg. Part No. Description Stock No. Price EachFLUKE-233 True-rms Wireless Remote Display Digital Multimeter 10R6966 320.95

(148522)

(148702)

• 5MHz, 20MS/s Oscilloscope• 41⁄2-Digit, 20,000 Count DMM• 1.3GHz Frequency Counter• 5MHz Function Generator• Logic Analyzer

Mfg. Part No. FLUKE-27-II FLUKE-28-IIResponse: Average True-rmsCounts: 6000 6000 / 19,999Voltage: 0.1mV to 1000V AC/DCCurrent: 0.1µA to 10A AC/DCResistance: 0.1Ω to 50 MΩCapacitance: 1nF to 9999µFFrequency: 0.5Hz to 199.99kHzFunctions: Min/Max/Average, Hold, Auto, Manual Range, Continuity / DiodeTemperature: ... -200°C to +1090°CLow Pass Filter (Measurements on VSD’s):

... Yes

Safety Rating: CAT III 1000V, CAT IV 600VIP Rating: IP67Power: Three AA Batteries for 800-Hours of Battery LifeDimensions: 8″H x 3.75″W x 2.2″D

Choice of uncalibrated or calibrated models. Features 2.5 x 2.5″ 160 x 160 pixel graphic LCD, RS-232 interface.Standard accessories include: holster, AC/DC adapter, scope probe and adapter, DMM test leads, RS-232 software,RS-232 cable, and owner’s manual.

FLUKE-233 TRUE-RMS,WIRELESS REMOTE DISPLAYDIGITAL MULTIMETER

20 MHz AND 60MHz2-CHANNEL DIGITALOSCILLOSCOPES

Mfg. Part No. Description Stock No. Price EachFLUKE-27-II Waterproof Digital Multimeter 10R6967 440.00FLUKE-28-II True-rms, Waterproof Digital Multimeter 10R6968 465.95

• 3.8″ (97mm) color LCD display makes viewingmultiple waveforms easy

• Peak detect function for 50ns glitch capture • XY mode • Persistence mode for observing dynamic signals • EN61010-1, CAT II 400V safety rating• One year warranty

• Wireless technology allows display to be carried upto 30-ft. away from point of measurement

• Removable magnetic display can be convenientlymounted where it is easily seen

• No need to hold meter to make or read

Mfg. part nos. MS420 and MS460 auto-set function optimizes the position, range, timebase, and triggering to assure astable display of virtually any waveform. Five automatic measurements: frequency, cycle, average, peak to peak andRMS. Comes complete with two oscilloscope probes, test leads, Windows® compatible USB software and cable, currentshunt, capacitor measuring module, adjustment screw driver, AC adaptor/ charger, and hard carrying case. CEcompliant.

measurements, improving visual focus on probes• Low-power 802.15.4 wireless technology does not interfere with measurement accuracy• Use as a conventional multimeter when display is connected• Auto power off maximizes battery life• Radio transmitter automatically turns off when display is connected to meter• True-rms AC voltage and current for accurate measurements on non linear signals • Record signal fluctuations using Min/Max function• Test continuity and diodes• Easy-to-read display with large digits and bright backlight• Battery life approximately 200-hours• Three-year manufacturer’s warranty• Made in the U.S.A.• CE compliant, TUV approved

(148703)

FLUKE-27-II AND FLUKE-28-IIRUGGED, WATERPROOF,FULLY-SUBMERSIBLE DIGITALMULTIMETERS

FLUKE-233 true-rms, remote display digital multimeter allows the operator to be in two places at once. The removabledisplay solves the problems of holding both the meter and the test leads to make a measurement. Designed for makingmeasurements in hard-to-reach places, and in machines or panels that are physically separated from a limit switch oran isolator switch. Ideal for working in areas where the operator can’t be close to the active measurement point, likeclean-rooms or hazardous areas. Comes complete with test leads, alligator clips, temperature probe, batteries, user’smanual and three-year manufacturer’s warranty.

• IP67 waterproof and dustproof protection, imperviousto the harsh environments

• Designed to withstand 3 meter drop • Hi-resolution, easy-to-read display with large digits and

bright, two-level backlight for increased visibility• Backlit keypad buttons allows for easy visibility in low-

lit areas • Reversible holster for added protection when not in use• Improved sleep mode for long battery life• Relative mode to remove test lead resistance from low

ohms measurements• Auto and manual ranging for maximum flexibility• MSHA approved for hazardous areas• Limited lifetime manufacturer’s warranty• Made in the U.S.A.• CE complaint, TUV approved


Features:

FLUKE-27-II and FLUKE-28-II fully-submersible digital multimeters are ruggedly built to work in the toughestenvironments. These two industrial multimeters define a new standard for operating in harsh conditions with thefeatures and accuracy to troubleshoot most electrical problems. Both meters have IP-67 (waterproof and dustproof)rating, MSHA approvals, an extended operating temperature range of -15° C to + 55°C (5°F to 131°F) and 95%humidity, and are shock/vibration-resistant to withstand a 3-meter (10-ft.) drop to concrete. Both meters can withstandhazardous 8000 volt spikes caused by load switching and faults on industrial circuits and comply with second edition IECand ANSI electrical safety standards. Mfg. part no. FLUKE-28-II also features hi-resolution 20,000 count display modeand true-rms AC voltage and current for accurate measurements on non linear signals. Plus it has a unique function foraccurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisyequipment. Both models come complete with holster, test leads, alligator clips, batteries and user’s manual.


Measures:• True-rms AC voltage and current• Measure up to 1000V AC and DC• Measure up to 10A (20A for 30 seconds)• 10,000µF capacitance range• Frequency to 50kHz• Built-in thermometer conveniently takes

temperature readings without having to carry aseparate instrument

• Resistance, continuity and diode test• Min/Max and average recording to capture

variations automatically

Measures: • Built-in thermometer conveniently takes temperaturereadings without having to carry a separateinstrument

• Resistance, continuity and diode test• Min/Max and average recording to capture variations

automatically

• Measure up to 1000V AC and DC• Measure up to 10A (20A for 30 seconds)• 10,000µF capacitance range• Frequency to 200kHz• Extended AC voltage bandwidth – 15Hz to 20khz

Features:

FLUKE-27-II FLUKE-28-II



9


DIGITAL MULTIMETERS


Mfg. Part No. Description Stock No. Price EachFLUKE-289/IMSK Fluke-289 Industrial Logging Meter w/ Fluke- i400 Clamp

Meter Combo Kit09R2346 584.95

Mfg. part no. FLUKE-179/IMSK combo kit combines the rugged 179 true-rms multimeter with a built-in thermometerand the 322 AC current clamp. Together they provide the ability to troubleshoot electrical and electromechanicalproblems.

Mfg. Part No. Description Stock No. Price EachFLUKE-179/IMSK Fluke-179 Meter w/ Fluke 322 Clamp Meter Combo Kit 09R2345 295.95

(147954)

FLUKE-289/IMSK AND FLUKE-179/IMSKINDUSTRIAL MULTIMETER SERVICE COMBO KITS

Mfg. Part No. Description Stock No. Price EachFLUKE-287 Fluke 287 Digital Multimeter 42M9904 464.95FLUKE-289 Fluke 289 Digital Multimeter 42M9905 544.95

Mfg. Part No. Description Stock No. Price EachTLK287 Electronics Master Test Lead Kit 70M8699 119.55

INDUSTRIAL MASTER TEST LEAD KITMfg. part no.TLK289 Industrial Master test lead kit contains SureGrip™ alligator clips, grabbers, hook clips andindustrial test probes for dependable contact with a variety of test points. Also includes a temperature adapter withK-Type thermocouple for direct temperature measurement with user’s own DMM’s temperature measurementfunctions, a convenient, magnetic DMM hanger and a protective, softside carrying case.

Mfg. Part No. Description Stock No. Price EachTLK289 Industrial Master Test Lead Kit 70M8700 119.55

Mfg. part no. FLUKE-289/IMSK combo kit combines the advanced data logging multimeter with Trendcapture with thei400 AC current clamp. Together they provide the ability to troubleshoot most industrial problems.

Mfg. Part No. Description Stock No. Price EachFLUKE -289/FVF Fluke 287 Digital Multimeter, test leads, alligator clips,

80BK temperature probe, TPAK magnetic meter hanger,FlukeView® forms software and cable, soft case.

54M4559 615.95

(105203)

• Fluke-179 True RMS Multimeter with temperaturefrequency, capacitance0.09% basic accuracy6000 countsSmoothing mode allows filtering of rapidly changinginputs

• Fluke-322 AC 400A Current ClampMeasures AC current to 400 AMeasures AC and DC volts to 600 VPrecise measurements with 1.8% basic accuracyResolution up to 0.01A and 0.1 V

• 80BK-A thermocouple bead probe

ELECTRONICS AND INDUSTRIALMASTER TEST LEAD KITS

(94360)

FLUKE 287, 289 DIGITAL DATA LOGGINGMULTIMETERS

These master test lead kits are ideal for today’s electrical and electronics testing and design. Perfect to complementmfg. part nos. Fluke-287 and Fluke-289 logging digital multimeters; ordered separately on this page.

Mfg. Part No. Description Stock No. Price EachTPAK ToolPak Magnetic and Velcro Strap 97B3576 33.15FVF-SC1 FlukeView Forms Software with Cable for 53-II, 54-II, 87IV

and 89IV24C4883 187.15

FLUKE-FVF-SC2 FlukeView Forms Software with Cable for 280 and 180series, 789, 1550B and 1653

26K2565 179.93

FVF-SC4 FlukeView Forms Software with Cable for 8808A, 8845A,and 8846A

55M0615 243.45

FLUKE-FVF-BASIC FlukeView Forms Basic Software with Cable for 280 and180 series, 789 and 1550B

26K2563 120.20

FLUKE-FVF-UG FlukeView Forms Software Upgrade 26K2567 92.72FLUKE-BP189 High Capacity Battery Pack 26K2561 43.10FLUKE-IR189USB RS232-to-USB Cable Assembly 26K2568 40.80

• TL75 test leads • AC72 Alligator Clips • Limited lifetime warranty on Fluke-179 and 2-year warranty on Fluke-322

(48580)

Fluke-179/IMSK Kit includes:

• 50,000 count 1/4 VGA dot matrix display with white backlight • True-RMS for accurate measurements on non-linear loads• Trendcapture plots measurements as single line to help detect anomalies • LoZ: low input impedance prevents false readings due to “ghost voltage” (Model 289)• 50 Ohm Range for motor winding and low ohm measurements (Model 289) • Soft keys and navigation control provide access to secondary functions• Saved measurements allows the user to name and recall measurements made in the field• Field upgradeable and expandable meter as new capabilities added• Record events and trends, and display as a graph on the meter without downloading to a PC• Multi lingual interface• Internal memory allows stand-alone logging up to 200 hours• Min/Max/Average with Time Stamp to record signal fluctuations• Compatible with optional magnetic hanger (ToolPak) for hands free operation• Optical RS232, USB communication interface • CAT III 1000 V / CAT IV 600 V safety rated

TLK287

IV series accessories allows easy storage of multimeters. TPAK ToolPak™ allows you to hang your meter by a magnetor strap hanger. The magnet allows you to hang your multimeter just about anywhere. For use witrh FLUKE-110, -170,-180 series, 87V, 83V DMMs, 724, 725 and 789 ProcessMeter™ test tools.

TLK289

FLUKE 289

Fluke-289/IMSK Kit includes:

TYPE 289 KIT

• Fluke-289V Advanced data logging Multimeter Trendcapture: record, graph and reviewmeasurements in the fieldPrecise Performance: solve problems with speed andaccuracyLarge 50,000 count, 1/4 VGA display with whitebacklightUnique function for accurate voltage and frequencymeasurementsLoZ Volts low impedance voltage function50 ohm range

ELECTRONICS MASTER TEST LEAD KIT

FVF-SC2

Mfg. part no. TLK287 Electronics Master test lead kit includes precision electronic probes with multiple spring-loadedsharp tips to maximize contact with SMD test points, micro-grabbers and leads to enable fine SMD testing plusmini-alligator clips, grabbers and probes for virtually every electronics need. All packaged in a handy storage case.

Features:

• Fluke-i400 AC 400A Current Clamp Companion to your DMM to measure up to 400 A AC1mA/Amp output CAT IV 600 V / CAT III 1000 V safety ratingDesigned to offer maximum utility in a very compact shape22 of the most useful accessories

• TL71 Silicone Test Leads• AC72 Alligator Clips • Limited lifetime warranty on Fluke-289 and 1-year warranty on accessories

TPAK

Capabilites

Fluke-289/IMSK

Mfg. part no. FVF-SC2 FlukeView® Forms version 3.0 software allows you to document, store and analyze readings ormeasurements from mfg. part nos. 280 and 180 series , 789, 1550B or 1653 test tools. Mfg. part no. FVF-SC4version 4.0 software supports 8808A, 8845A and 8846A multimeters. FlukeView® forms software offers enhanceddisplay functions and real time logging with mfg. part nos. 187 and 189. Provides data download for mfg. part no. 189.Creation of custom forms, reports, graphs and tables. Includes interface cable, full user documentation and manual.Mfg. part no. FVF-Basic works with mfg. part nos. 280 and 180 series, 789, 1550B and 1653.

• Measures up to 1000V AC and DC• Current measurement 20A (30 seconds momentary; 10A continuous)• 10,000µF capacitance range• Frequency to 999.99kHz• Build in thermometer -200°C to +1350°C (-328°F to +2462°F)• Continuity/Conductance/Capacitance• Resistance and continuity

Mfg. part no. BP189 high capacity battery pack for Fluke-180 series DMMs. Mfg. part no. IR189USB changes theRS232 serial cable in the mfg. part no. FVF-SC2 to a USB cable.

Fluke-179/IMSK

BP189

280 Series Trend

IR189USB

LOGGING DIGITALMULTIMETER ACCESSORIES


2202

9


DIGITAL MULTIMETERS


(78759)

Mfg. Part No. Description Stock No. Price EachFLUKE-62/T+PRO/1AC FLUKE-62/T+PRO/1AC Kit with C115 Softcase 09R2347 189.00

Mfg. Part No. Description Stock No. Price EachFLUKE-179/1AC-II KIT Electricians Combo Kit 45M5421 292.95


FLUKE-179/1AC-II KIT CAL Electricians Combo Kit 50M7190 337.95

87V/E INDUSTRIAL COMBO KIT

Mfg. Part No. Description Stock No. Price EachFLUKE-179/EDA2 Electronics Combo Kit 31M7868 292.95

(74086)

Kit Contents:

(74088)

(147957)

Multimeter and accessory combination designedspecifically for today’s electrician. Rugged 1000VCAT III meter, and industrial strength test lead set,and a non-contact voltage detector all in a durablecarrying case.

Full-featured DMM with advanced electronictroubleshooting functions plus probes andhooks for delicate electronic measurementsall packed in a sleek, durable carrying case.Designed to meet the demands of the elec-tronics professional.

ELECTRICAL/HVAC COMBO KIT

• 87V Industrial Multimeter• 1.5m Silicone Leads Resist Heat• Removable Probes with 4mm of Exposed

Metal for Use on Industrial Circuits• Retractable Long Reach Alligator Clips• Magnetic Hanger to Position and Hold

Meter to Steel Surfaces• K-Type Temperature Probe• Lightweight soft case to provide optimal

protection and storage• Kit Offers a Solution for Maximum

Productivity of Industrial Electricians

ELECTRONICS COMBO KIT

• Accuracy: ±1.5% of reading • Wide temperature range from -30°C to 500°C (-20°F to 932°F) • Single point offset laser sighting • Backlit display for poorly lit areas

ELECTRICIAN’S COMBO KIT

Combo Kit Includes:

Mfg. Part No. Description Stock No. Price EachFLUKE-87-5/E2 KIT Industrial Multimeter Combo Kit 12M6081 429.95


FLUKE-87-5/E2 KIT CALIBRATED Industrial Multimeter Combo Kit 23M2642 484.95

Mfg. part no. FLUKE-62/T+PRO/1AC electrical/HVAC combo kit includes compact Fluke 62 IR thermometer teamedwith the full featured T+PRO voltage tester and the easy-to-use 1-AC-II non-contact voltage detector. Use the IRthermometer to test for overheating in electrical devices, then use the electrical test tools to find more about theproblem. Comes complete with soft case.

Combo Kit Includes:

• Fluke 179 True-rms Digital Multimeter withBacklight

• Fluke 1AC-II Non-Contact Voltage Tester• Fluke TL224 Silicone Test Leads• Fluke TP220 Industrial Test Probes• Fluke AC220 Heavy Duty Alligator Clips• Fluke 80BK-A Integrated Temperature Probe• Fluke 35 Soft Carrying Case

Fluke 62 Mini Infrared Thermometer

• Fluke 179 True-rms Digital Multimeterwith Backlight

• Fluke TL224 Silicone Test Leads• Fluke TL910 Electronic Test Probes with

Replacement Tips• Fluke AC280 Heavy Duty Hook Clips• Fluke 80BK-A Integrated Temperature

Probe• Fluke C35 lightweight soft case to

provide optimal protection and storage• TPAK Magnetic Hanger

Fluke T+PRO Voltage and Continuity Tester

Mfg. Part No. Description Stock No. Price EachFLUKE-83-5 Industrial Digital Multimeter 96H6286 369.95FLUKE-87-5 Industrial Multimeter with Temperature 96H6287 379.95FLUKE-87-5/EX Intrinsically Safe True-rms Multimeter 20M0501 899.95


FLUKE-83-5 CALIBRATED Calibrated Industrial Digital Multimeter 60K7396 424.95FLUKE-87-5 CALIBRATED Calibrated Industrial Multimeter with Temperature 58K3279 434.95

Mfg. Part No. Description Stock No. Price EachFLUKE-175 ESFP Model 175 Digital Multimeter 25C4796 237.95FLUKE-177 ESFP Model 177 Digital Multimeter 25C4800 247.95FLUKE-179-ESFP Model 179 Digital Multimeter 25C4804 257.95


FLUKE-175 ESFP CALIBRATED Calibrated Model 175 Digital Multimeter 57K9813 282.95FLUKE-177 ESFP CALIBRATED Calibrated Model 177 Digital Multimeter 57K9814 292.95FLUKE-179-ESFP CALIBRATED Calibrated Model 179 Digital Multimeter 57K9815 302.95

(78246)

(68973)

• Three forms of ac/dc voltage detection: light, sound, andvibration

• Extra heavy-duty, replacement test leads • Safety rated CAT IV 600, CAT III 1000 V• Continuity beeper

FLUKE-80 SERIES VINDUSTRIAL MULTIMETERS

Fluke 1AC-II VoltAlert™ Non-Contact Voltage Detector

FLUKE-170 SERIES DIGITALMULTIMETERS

Features:• Wide 1000 V measurement range• True-rms voltage and current measurements • 6000 count resolution• Digital display with analog bargraph and

backlight (177, 179)• Manual and automatic ranging• Display Hold and Auto Hold• Frequency and capacitance measurements• Resistance, continuity and diode

measurements• Temperature measurements (179)• Min/Max/Avg recording• Easy battery exchange without opening the

case• Closed case calibration through front panel• Ergonomic case with integrated protective

holster• EN61010-1 CAT III 1000 V, CAT IV 600 V• Recommended accessories: C25 Case, TL71

Test Lead Kit, i410 Current Clamp

• Voltbeat technology continually tests its battery and circuitry• Upon detection of voltage, tip glows and beeper sounds • Voltage detection of 90 to 1000 VAC • CAT IV 1000V

FLUKE-179

• Unique Function for Accurate Voltage and Frequency Measurements onAdjustable Speed Motor Drives and Other Electrically Noisy Equipment(FLUKE-87-V and 87V EX)

• Optional Magnetic Hanger for Hands-Free Setup and Viewing• Large Display Digits and 2-Level Bright White Backlight for Increased

Visibility• Withstands Hazardous 8,000 Volt Spikes Caused by Load Switching and

Faults on Industrial Circuits• Complies with Second Edition IEC and ANSI Electrical Safety Standards• Improved Sleep Mode for Long Battery Life• Relative Mode to Remove Test Lead Resistance for Low Ohms

Measurements• Auto and Manual Ranging for Maximum Flexibility• Meets 1000V CAT III and 600V CAT IV Safety Standards (IEC 1010-1)• UL listed, CSA certified, CE compliant, VDE approved, TUV approved• Recommended accessories: C35 Case, TLK-220 Test Lead Set, i400

Current ClampCapabilities:

AC amps: 3mA to 10.00A (20A overload for 30 seconds). DC amps: 0.01mA to 10.00A (20A overload for 30 seconds). ACvoltage: 30mV to 1000V. DC voltage: 0.1mV to 1000V. Resistance: 0.1Ω to 50.00MΩ. Capacitance: 1nF to 9999µF.Frequency voltage input: 2Hz to 100kHz; current input: 2Hz to 30kHz. Temperature range: -40°F to +752°F (-40°C to+400°C). Includes test leads, battery and manual. FLUKE-179 also includes 80BK-A temperature probe. Certificate ofcalibration available on all models, go online or call Newark.

• Measure up to 1000V AC and DC• Measure up to 10A (20A for 30 seconds)• 10,000uF Capacitance Range• Frequency to 200kHz and % Duty Cycle• True-rms AC Voltage and Current for Accurate Measurements on Non Linear Signals (FLUKE-87-5)• Built-in Thermometer (FLUKE-87-5); Thermocouple Included• Peak Capture to Record Transients as Fast as 250 µs (FLUKE-87-5)• 41⁄2 Digit Mode (FLUKE-87-5)

FLUKE-80 series V has improved measurement functions, troubleshooting features, resolution and accuracy to solvemore problems in electronics, plant automation, power distribution, and electro-mechanical equipment.



9


DIGITAL MULTIMETERS


FLUKE 179MULTIMETERAND TOOLPAK™COMBO KIT

(148859)

Combo Kit Includes:

Mfg. Part No. DescriptionCurrent Measuring

Range Stock No. Price EachI410-KIT AC/DC Current Clamp Kit 400A (AC), 400A (DC) 02J7894 240.95I1010-KIT AC/DC Current Clamp Kit 600A (AC), 1000A (DC) 85H0100 337.40

CURRENT CLAMP ONLY

I800 AC Current Clamp Probe 800A (AC) 55M0782 244.00I410 AC/DC Current Clamp 400A (AC), 400A (DC) 01F006 194.65I1010 AC/DC Current Clamp 600A (AC), 1000A (DC) 01F007 316.40

CURRENT CLAMP ONLY WITH CALIBRATION AND PRINTED CERTIFICATION AND DATA REPORT

I410 CALIBRATED Calibrated AC/DC Current Clamp 400A (AC), 400A (DC) 57K9831 234.65I1010 CALIBRATED Calibrated AC/DC Current Clamp 600A (AC), 1000A (DC) 57K9830 356.4080I-110S Calibrated AC/DC Current Clamp 92F6683 499.00

Mfg. Part No. Description Stock No. Price EachTLK-220 SureGrip Industrial Test Lead Kit 86H2845 117.00

Mfg. Part No. Description Stock No. Price EachFLUKE-117/322 Digital Multimeter and Clamp Meter Electrician’s Combo Kit 83K1722 267.95

(79163)

(79154)

(88091)

AC/DC CURRENTCLAMP KITS

Mfg. Part No. Description Stock No. Price EachFLUKE-179/TPAK True-RMS Digital Multimeter w/Magnetic

Hanging Kit74C6496 272.95


FLUKE-179/TPAK CALIBRATED True-RMS Digital Multimeter w/MagneticHanging Kit

60K7388 317.95

TLK-220 US INDUSTRIALTEST LEAD KIT

FLUKE-117 TRUE-RMS DIGITAL MULTIMETERAND FLUKE-322 CLAMP METERELECTRICIAN’S COMBO KIT

Included With Set:

Combo Kit Includes:

(74091)

• For use with yourFluke DMM to extendthe current ranges

• Choice ofnoncalibrated orcalibrated models

• Fluke-117 true-rms digital multimeter with non-contactvoltage detection

• Fluke-322 Compact clamp meter• Mfg. part no. TL75 hard point test lead set• Mfg. part no. TPAK ToolPak™ magnetic meter hanging

strap• Mfg. part no. C115 deluxe carrying case with shoulder strap

• AC220 Plunger Style Alligator Clips• AC285 Large Jaw Alligator Clips• TP220 Sharp Test Probes• TL224 Right-to-Straight Test

Leads• Zippered Vinyl Carrying Case With

Moveable Divider

These special-value current clamp kits are ideal for electrical professionals looking to add on DC and AC currentmeasurement capabilities to their DMM. Each kit includes a zippered, vinyl carry case with moveable divider. Case isroomy enough to hold and protect current clamp (included) along with your own digital multimeter and accessories

FLUKE 179 multimeter plus magnetic hanger (TPak) for hands free viewing.

Mfg. Part No. Fluke-117 Fluke-116 Fluke-115 Fluke-114 Fluke-113AC/DC Voltage 600V 600V 600V 600V 600VAC/DC Current 10A Continuous 10A ContinuousMicroAmps

VoltAlert™

AutoVolts

VCHEK™

LoZ

Resistance 40MΩ 40MΩ 40MΩ 40MΩ 60KΩTemperature

Capacitance 1nF to 9999µF 1nF to 9999µF 1nF to 9999µF 1nF to 9999µFFrequency 0.1Hz to 50kHz 0.1Hz to 50kHz 0.1Hz to 50kHzContinuity

Min./Max./Avg.

Diode Test

Hold

• Fluke 179 Meter (w/Temperature)

• Two Universal Hanger clips• Two hook & Loop Straps• Strong Magnet

NON-CALIBRATED KITS

Special value SureGrip Set for industrial applications. Includes two sizes of alligator clips and sharp test probes forreliable connections, test leads and a roomy carrying case to hold and protect your meter and all your accessories. All1000V CAT III, 600V CAT IV related.

Fluke117/322 multimeter and clamp meter electrician’s combo kit isthe perfect solution to meet the demands of electrical professionals.The NEW Fluke 117 DMM is paired with a Fluke 322 clamp meter forproductive and effective troubleshooting in one total solution. Includesthe NEW mfg. part no. C115 durable soft carrying case for protectionand easy meter transportation.

Mfg. Part No. Description Stock No. Price EachFLUKE-117 Electrician’s True RMS Digital Multimeter 83K1721 186.95FLUKE-116 HVAC True RMS Digital Multimeter 83K1719 176.95FLUKE-115 True RMS Digital Multimeter 83K1718 156.95FLUKE-114 Electrical True RMS Digital Multimeter 83K1717 129.95FLUKE-113 Utility Digital Multimeter 94M4662 119.95

ACCESSORIESC25 Softside Vinyl Meter Case 44F7741 31.00TPAK ToolPak Magnetic and Velcro Strap Tool Hanger 97B3576 33.15TL75 Replacement Test Leads 44F622 18.05

(88089)

FLUKE 110 SERIESDIGITAL MULTIMETERS

110 series digital multimeters have features and functions professional electricians need to get their job done. Mfg.part no. Fluke-117 is the ideal DMM for demanding settings like commercial buildings, hospitals and schools. Thecompact design makes it easy to hold and use one-handed. Mfg. part no. Fluke-116 has a built-in thermometer and isspecialized for HVAC applications including temperature and microamp measurements to quickly troubleshootproblems with HVAC equipment and flame sensors. Mfg. part no. Fluke-115 is designed for a wide variety of electricaland electronic testing applications. Mfg. part no. Fluke-113 is simple-to-use and has the features needed to repairmost electrical problems Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultane-ously test for voltage or continuity. All models compatible with mfg. part no. TPAK ToolPak™ magnetic hanger forhands-free operation; ordered separately below. These DMMs include mfg. part no. TL75 hard point test lead set,registration and manual.

FLUKE-117

COMPARISON AT A GLANCE:

• VoltAlert™ technology non-contact voltage detection

• AutoVolt automatic AC/DCvoltage selection

• LoZ: low input impedanceprevents false readings due to“ghost voltage”

• Large display and white LEDbacklight to work in poorly litareas more effectively

• CAT III 600V safety rated• UL listed, CSA certified, CE

compliant, VDE approved, TUVapproved


2204

9


DIGITAL MULTIMETERS


(148860)

Mfg. Part No. U1251A U1252A U1253ADC Voltage Accuracy 0.03% 0.025%DC Volts 1000AC Volts 1000DC + AC Volts 1000DC Current 10AC Current 10DC + AC Current 10Resistance 50MΩ 500MΩCapacitance 100mFAC Frequency Limit 1MHzTemperature -200 to 1372°CConductance 500nSDBm

DBV

Duty Cycle

Pulse Width

Diode Check

Square Wave Output 0.5Hz - 4800HzFrequency Counter 20MHzSafety Rating EN61010-1 to 1000V CAT III, 600V CAT IV

Mfg. Part No. Description Stock No. Price EachU1251A Datalogging Hand-Held Digital Multimeter 04M7393 402.00U1252A Datalogging Hand-Held Digital Multimeter with Frequency

Counter and Square Wave Output04M7394 442.00

U1253A Datalogging Hand-held Digital Multimeter w/OLED Display 12P6194 450.00

Mfg. Part No. Description Stock No. Price EachU1173A IR-to-USB Connectivity Cable Assembly 04M7391 30.23U1160A Standard Test Lead Kit 04M7389 60.47U1161A Extended Test Lead Kit 04M7390 42.33U1180A Temperature Probe Thermocouple Accessory Kit 04M7392 35.25

Mfg. Part No. Description Stock No. Price EachCXT80 Extreme Case 12P9337 155.95CXT170 Extreme Case 09R2344 155.95CXT280 Extreme Case 67P4216 155.95

Mfg. Part No. Description Stock No. Price EachC510 Leather Meter Case 01C1138 53.65C520A Leather Electrical Tester Case 39C3071 41.70

(89359)

DATALOGGING HAND-HELDDIGITAL MULTIMETERS

Mfg. Part No. Description Stock No. Price EachC550 Tool Bag 06C0817 77.50

• High-resolution 50,000 count display• Unlimited datalogging

Mfg. Part No. Description Stock No. Price EachC25 Large, Soft Vinyl Meter Case 44F7741 31.00

Mfg. Part No. Description Stock No. Price EachC-90 Soft Vinyl Meter Case 44F597 29.65

Mfg. part nos.U1251A and U1252A datalogging DMMs provide high-accuracy and unique features. AC current andvoltage can be measured to 1MHz, with display of frequency on the dual display. The AC+DC current and voltage featureseparates AC and DC components of a signal and displays them simultaneously on the dual display, allowing user tomeasure ripple on a DC source or DC offset on an AC signal. The datalogging feature on both models allows manualstorage of 100 points, interval storage of 200 points and unlimited storage when connected to a PC via mfg. part no.U1173A IR-to-USB connectivity cable; ordered separately below. The supplied application software allows continuousdatalogging that is limited only by the user’s PC storage media. Mfg. part no. U1252A features a 20MHz frequencycounter and a square wave generator, variable in steps, with adjustable duty cycle. Both DMM models come completewith a softside carrying case, test lead kit, quick-start guide, CD which includes user’s guide, application software andinstrument drivers, certificate of calibration and test report. Mfg. part no. U1251A also includes one 9V battery and mfg.part no. 1252A includes one 7.2V rechargeable battery with AC adapter and power cord. Mfg. part no. U1253A is theworld’s first organic LED handheld digital multimeter.

All Models:

Mfg. Part No. Description Stock No. Price EachC125 Soft Fabric Meter Case 16F6985 32.00

Mfg. Part No. U1252A & U1253A Only;

Mfg. Part No. Description Stock No. Price EachC789 Fabric Meter and Accessory Case 92F7017 101.65

• Built-in 20MHz frequency counter• 0.5 to 4800Hz variable square wave

output• 10A DC+AC measurement range• Rechargeable battery with built-in

charger

Mfg. Part No. Description Stock No. Price EachC1600 Gear Box 81H6396 47.20

SPECIFICATIONS

Mfg. Part No. Description Stock No. Price EachFLUKE-C101 Hardside Carrying Case 26K2562 47.65

U1252A

(61079)

C510

Mfg. part no. U1160A standard test lead kit includes: test probe leads rated 1000V/15A, fine-tip test probes rated300V/3A , SMT grabber and mini-grabber clips both rated 300V/3A and alligator clips rated 1000V/10A. Mfg. part no.U1161A extended test lead kit includes: extended test leads and extension test probes both rated 1000V/15A, mediumalligator clips and 4mm banana plugs both rated 600V/10A. Mfg. part no. U1180A temperature probe thermocoupleaccessory kit (limits the temperature range to -20° to +200°C) includes: non-compensation transfer adapter, yellowK-type tip thermocouple and black J-type tip thermocouple.

ACCESSORIES

METER AND ACCESSORY CASES

U1253A

C510 AND C520A LEATHER CASES• Oiled genuine top-grain cowhide (brown)• Rugged construction with heavy-duty stitching and reinforced rivets• Large tool belt loop and top flap to secure meter• C510 case designed for Fluke 110 and 170 series meters and most other Fluke DMMs, thermometers, and

process calibrators• C520A case designed for Fluke T2 and T5 series electrical testers

C550

C550 TOOL BAG• Rugged, black and yellow ballistic cloth with heavy-duty hardware• Steel reinforced frame• Large, zippered storage compartment with 25 pockets• Weather resistant• Carry all your tools to the job

C25 LARGE, SOFT VINYL METER CASE FOR DMMs• Zippered, black and yellow soft vinyl case with padding• Inside pocket

C90 SOFT VINYL METER CASE• Zippered, black and yellow soft vinyl case • Inside pocket and belt loop

C125 SOFT FABRIC METER CASE

C789 FABRIC METER AND ACCESSORY CASE• Large black fabric carrying case with 3 compartments• Removable handle and shoulder strap

C1600 GEAR BOX FOR METER AND ACCESSORIES• Deep interior, lift-out tray keeps everything organized• Rubber gasket in lid seals out dust and keeps contents dry• Includes five hook and loop straps to wrap cords and test leads when not in use• Can be locked• Large carry handle for comfortable hauling

C1600

• Zippered, black and yellow fabric case • Detachable external pouch

FLUKE-C101 HARDSIDED CARRYING CASE FOR INDUSTRIAL TEST TOOLS• Tough, black polyprophylene exterior shell measures 12 x 14.2 x 4.1″• Interior cavity measures 9 x 11.5 x 2.5″• Configure diced foam interior to fit, store and protect all Fluke test tools• Durable molded latches and handle

CXT80, 170, 280 EXTREME CASES• Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof • Buoyancy allows case to float in salt water with 7.94 lb load • Includes an automatic purge valve for quick equalization • Features an exclusive neoprene O-ring and ABS latches for excellent seal

CXT80



9


DIGITAL MULTIMETERS


COMPACT MULTIMETERS WITH MAGNE-GRIP™ HOLSTER ANDVOLTECT™ (CONT.)

Mfg. Part No. Description Stock No. Price 1-99972-7222 Digital Clamp Multimeter with Temperature 01N4891 37.95

DC Voltage Accuracy 0.09%+5DC Volts 1000VAC Volts 1000VDC Current 10AAC Current 10ADC + AC Current 10AResistance 100MΩCapacitance 10mFAC Frequency Limit 1MHzTemperature -40°C to 1000°CSafety Rating 1000V CAT III Overvoltage Protection, 600V CAT IV

Manual Data Logging

Built-in Switch Counter, Harmonic Ratio

Dual/Differential Temperatures Capabilities

(93048)

Mfg. Part No. Description Stock No. Price EachU1241A Handheld Digital Multimeter 53M4052 201.00U1242A Handheld Digital Multimeter with Data Logging 53M4053 221.00

ACCESSORIESMfg. part no. U1181A immersion probe measures temperature of food, oil, and other liquids within -50° to +700°range. Mfg. part no. U1182A industrial surface probe measures still surface temperature within -50° to +400°range.Mfg. part no. U1183A air probe measures dryer, transport pipe and surrounding air temperature within -50° to+800° range. Mfg. part no. U1583A AC current clamp extends current measurement range up to 400A.

U1162A Alligator Clip 53M4043 10.07U1163A SMT Grabber 53M4044 10.07U1164A Fine Tip Test Probe 53M4045 10.07U1181A Immersion Temperature Probe 53M4046 59.39U1182A Surface Temperature Probe 53M4047 180.00U1183A Air Temperature Probe 53M4048 69.47U1184A Temperature Probe Adapter 53M4049 10.07U1185A Thermocouple ( J-type) and Adaptor 53M4050 20.04U1186A Thermocouple ( K-type) and Adaptor 53M4051 20.04U1583A Current clamp (400A) 53M4054 139.00

Mfg. Part No. Description Stock No. Price Each30XR-A Model 30XR Digital Multimeter 29M6225 64.95

Mfg. Part No. 5XP-A 15XP-A 35XP-ADC / AC Current 200µA to 200mA 200µa TO 2A 400uA to 2AResistance 200 Ohm to 20 MOhm 200 Ohm - 20 MOhm 400 Ohm to 40 MOhmCapacitance ... ... 4nF - 400 µFTemperature ... ... 20 to 1000°C, (-4 to 1832°C)Frequency ... ... 4KHZ to 1MHz

Mfg. Part No. Description Stock No. Price EachRC100 Tweezer Style Passive Component R/C SMD 61M1002 59.99

Mfg. Part No. 5XP-A 15XP-A 35XP-ADC Voltage 200mV - 1000V

(5 Ranges)400mV - 1000V(5 Ranges)

AC Voltage 200MV - 750V(5 Ranges)

400mV - 750V(5 Ranges)

DIGITAL CLAMP MULTIMETERWITH TEMPERATURE

(72225)

(148528)

Features:

(100234)

Mfg. Part No. Description Stock No. Price Each5XP-A Compact DMM w/Non-Contact Voltage Detector 29M6539 42.9515XP-A Compact DMM w/Logic Test, Non-Contact Voltage Detector 29M6212 62.9535XP-A Compact DMM w/Temperature, Frequency and Capacitance 29M6228 83.95

3 1⁄2 digit LCD, 2000 count, low battery indication. Dimensions: 195 x 91 x 60mm ( 7.7 x 3.5 x 2.4″). Weight: approx.426gr. ( 0.94 lbs.) including battery. Shipped with test leads, 9V battery (installed), Magne-Grip™ holster with magnethanging strap and operating instructions. Non-contact voltage indicator. Indicates AC voltages: 70V to 600VAC, red LEDand speaker both indicate presence of AC voltages in this range.

Specifications: Range

(79168)

HAND-HELD DIGITALMULTIMETERS

Mfg. part no. RC100 one-hand operation for fast,precise identification and measurement of surfacemount components. Comes complete with two AG13batteries and slide cover for storage.

• Built-in Non-Contact Voltage Detector with Audible and Visual Indicators• Data Hold• Min./Max. Value Recording• Continuity, Diode Test and Battery Test (1.5V, 9V)• DC Volts Ranges: 200mV, 2V, 20V, 200V, 600V• AC Volts (45Hz - 500Hz) Ranges: 200mV, 2V, 20V, 200V, 600V• DC Current Ranges: 200µA, 2mA, 20mA, 200mA, 10A• AC Current (45Hz - 500Hz) Ranges: 200µA, 2mA, 20mA, 200mA,10A• Resistance Ranges: 200Ω , 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ• CAT II 600V, CAT III 300V Rated, CE• UL and cULus Listed• One-Year Warranty

COMPACT MULTIMETERS WITHMAGNE-GRIP™ HOLSTER ANDVOLTECT™

• 10,000 count display• 0.09% basic DCV accuracy• True RMS AC measurement• Basic functions: ACV, DCV, ACI,

DCI, resistance, frequency,diode, continuity test

• Advanced functions:capacitance, temperature,MINMAX recording

• 1999 count autoranging display• Diode test• Continuity buzzer• Data hold• Sleep mode• Full icon display• Low battery indicator

• 4000 count LCD• Measures resistance,

capacitance, and diode test• Relative mode for zero or user

supplied reference• Overange and low battery

indicators• Auto power ofF

• DC voltage: 200mV, 2V, 20V, 200V, 600V• AC voltage: 2V, 20V, 20V, 600V• AC current: 2A, 20A, 200A, 400A• Resistance: 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ• Temperature: -40°F – +1832°F

35XP-A

TWEEZER STYLE PASSIVECOMPONENT R/C SMD

Mfg. part nos.U1241A and U1242A enable checking more with wide measurement ranges. Feature true RMS on their10,000 count displays. Dual-level backlighting allows operaton even in subdued lighting conditions while prolongingbattery life. Built-in switch counter, harmonic ratio, dual temperature and differential temperature capabilities can beaccessed with the press of a button. Rated CAT III 1000 V, CAT IV 600V protection. Both DMM models come completetest lead kit, quick-start guide, CD which includes user’s guide, application software and instrument drivers, certificateof calibration, and four 1.5V AAA alkaline batteries.

MODEL 30XR-A DIGITALMULTIMETER

Features:

U1242A

Digital Clamp Multimeter with Temperature Measurement is perfect for general purpose applications including HVACand appliance repair. Comes complete with zipper case, test leads, two AAA batteries and owners manual.

Both Models:

• 2000-Count (Mfg. part no. 35XP-A) 4000-Count Display• Voltect™, Non-Contact Voltage Detection, 70 to 600VAC, 50Hz ∼ 60Hz• DC Voltage and AC Voltage Measurements• DC Current and AC Current Measurements• Resistance, Continuity, Diode Test• Logic Test TTL to 20MHz (Mfg. part no. 15XP-A)• Capacitance, Temperature and Frequency (Mfg. part no. 35XP-A)• Range Lock, Data Hold, Input Jack Warning Tone (Mfg. part nos.

15XP-A and 35XP-A)• One-Year Warranty

Three new compact multimeters from Meterman. The 5XP-A, 15XP-A, and 35XP-A include MagneGrip™ Holster andVoltect™. The exclusive Magne-Grip™ holster wih magnetic hanging strap frees both your hands for work, andVoltect™ , a non-contact voltage dector, allows the quick detection of dangerous AC voltages without probing.

Mfg. Part No. U1242A Only:

SPECIFICATIONS

• Manual data logging• Built-in switch counter,

harmonic ratio• Dual/differential temperatures

capabilities

SPECIFICATIONS-U1241A & U1242A

SPECIFICATIONS-U1242A ONLY

DIGITAL MULTIMETERS


2206

9


DIGITAL MULTIMETERS


ADVANCED DIGITAL MULTIMETERS (CONT.)

(148861)


1-972-7730 True RMS Multimeter with USB Interface 45M5527 159.67

AC Volts 3V - 450VDC Volts 300mV - 450VResistance 300Ω - 30MΩ

(93043)

TRUE RMS MULTIMETER WITHUSB INTERFACE

Mfg. Part No. Description Stock No. Price Each72-4040 Pocket Digital Multimeter 66F1961 45.60

Mfg. Part No. 72-7770 72-7765 72-7720 72-7725Stock No. 02J5547 02J5546 02J5538 02J5539

Capacitance 2 nF - 100 µF 2 nF-20 µFTemperature -40°C to 1000°CFrequency 2kHz to 20kHz

Fused 10A rangeDuty Cycle

Relative modeRS232C

CalibrationMin/MaxPeak/Avg

ConductanceSafety IEC 1010, 600V CAT I, 300V CAT II,

CEIEC 1010, 1000V CAT II, 600V CAT III, CE

Features:

Mfg. Part No. 72-7770 72-7765 72-7720 72-7725Stock No. 02J5547 02J5546 02J5538 02J5539Backlight X X X

Auto rangingBargraphTrue rms

Display counts 2000 4000 2000 20000DCV accuracy ±0.5%+2 ±0.8%+1 ±0.5%+1 ±0.5%+1

DC V 200 mV to 500 V 400 mV to 500 V 200 mV to 1000 V 200 mV to 1000V

AC V 200V to 500 V 4V to 500 V 200 mV to 750 V 2V to 750 VDC A 2000uA to 10A 400uA to 10A 20uA to 20A 2mA to 20AAC A 400uA to 10A 20uA to 20A 2mA to 20AOhms 200 Ohm - 200

MOhm400 Ohm to 40

MOhm200 Ohm - 200

MOhm200 Ohm - 200

MOhm

(5427)

POCKET DMM WITH BARGRAPH

Mfg. Part No. Stock No. Price Each72-7770 02J5547 12.6972-7765 02J5546 19.9572-7720 02J5538 30.2572-7725 02J5539 37.95

• Large 19,999 count backlit displaywith analog bargraph

• True RMS Measurement• Selectable auto/manual range

• Data logging and data recall• Max/min mode• Sleep mode Mfg. Part No.

72-7735CALIBRATED

W/DATA

72-7740CALIBRATED

W/DATA

72-7750CALIBRATED

W/DATA

72-7745CALIBRATED

W/DATA72-7755

CALIBRATEDStock No. 02J7830 02J7831 02J7833 02J7832 73K2532Backlight X X X X

Auto ranging X X X X XBargraph XTrue rms X

Display counts 4000 4000 6000 4000 4000DCV accuracy ±0.8%+1 ±0.8%+1 ±0.5%+3 ±0.8%+1 ±0.8%+1

DC V 400mV to1000V

400mV to 1000V

600mV to 1000V

400mV to 1000V

400mV to 1000V

AC V 4V to 750 V 4V to 750 V 600 mV-1000 V 4V to 750 V 4 to 750 VDC A 400uA to 10A 400uA to 10A 60mA to 10A 400uA to 10A 400uA to 10AAC A 400uA to 10A 400uA to 10A 60mA to 10A 400uA to 10A 400uA to 10AOhms 40 Ohm to

40 Mohm400 Ohm to40 MOhms

600 Ohm to 60 MOhm

400 Ohm to 40 MOhm

400 Ohm to 40 MOhm

Capacitance 40 nF - 100 µF 40 nF - 100 µF 6 nF - 6 mF 4 nF - 40 mFTemperature -40°C to

1000°C-40°C to1000°C

-40°C to1000°C

-40°C to1000°C

Frequency 10Hz to10MHz

10Hz to10MHz

6kHz to60MHz

10Hz to10MHz

4kHz to400 MHz

Fused 10A range X X X X XDuty Cycle X X X

Relative mode X X X XRS232C X X X X

Calibration X X X X XMin/Max XPeak/Avg

ConductanceSafety IEC 1010, 1000V CAT II, 600V CAT III, CE IEC 1010,

1000V CATIII,600V CAT IV,

CE

SPECIFICATIONS

Features:

Mfg. Part No. Stock No. Price Each72-7735 CALIBRATED W/DATA 02J7830 71.6372-7740 CALIBRATED W/DATA 02J7831 80.9972-7750 CALIBRATED W/DATA 02J7833 122.9572-7745 CALIBRATED W/DATA 02J7832 119.0072-7755 CALIBRATED 73K2532 149.00


• 31⁄2-Digit LCD with Bargraph• 3200-Count Display• Over Range Indicator• Auto Power-Off• Data Hold, Range Hold• Continuity and Diode Test• Low-Battery Indicator• 450VDC/AC RMS Overload Protection• 90-Day Manufacturer’s Warranty• Includes Battery and Owner’s Manual• CE Compliant

(83983)

• DC voltage: 200mV, 2V, 20V, 200V, 1000V• AC Voltage: 2V, 20V, 200V, 1000V• DC Current: 200uA, 2000uA, 20mA, 200mA, 10A• AC Current: 200uA, 2000uA, 20mA, 200mA, 10A• Resistance: 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ• Capacitance: 20nF, 200nF, 2uF, 20uF, 200uF, 2mF, 20mF• Temperature: -40°F - 1832°F• Frequency: 20Hz, 200Hz, 2KHz, 20KHz, 200KHz, 2MHz, 20MHz, 200MHz• Duty Cycle: 10% - 90%• Current Loop: 4 - 20mA displays 0 - 100%• Input Impedance: 10MΩ• Dimensions: 8″ x 3 5⁄8″ x 1 1⁄2″ (H x W x D)

ADVANCED DIGITAL MULTIMETERS

Full function multimeter offers a variety of ranges for every service application and an optically isolated USB interface.Includes four foot opto-coupled USB cable, data logging software, standard test leads, short clip leads for accuratecapacitance measurement, alligator clip adaptors, standard 9V battery, soft case and instruction manual.

• 1-Year Warranty• Data Hold (Except 72-7765)• Diode and Continuity Tests

• Great Meters, Great Values• Selected Models Calibrated with

Documentation

New digital multimeters’ advanced designs use high-resolution A/D converters and microcontrollers. Performance,versatility, and safety are optimized for the most demanding applications. All models include test leads, holster, manual,and batteries.

72-7770 72-7765

72-772072-7725

72-7735C, 72-7745C72-7740C, 72-7750C

72-7755C

NON-CALIBRATED UNITS

CALIBRATED UNITS WITH CERTIFICATION AND DATA REPORT



9


DIGITAL MULTIMETERS • VOLTAGE TESTERS


T+ AND T+PRO ELECTRICAL TESTERS (CONT.)

Mfg. Part No. Description Stock No. Price EachLVD1 Volt Light 11J3453 28.25

(84888)

NON-CONTACT ACVOLTAGE DETECTOR

Mfg. Part No. 388B 389A 390A 391ATrue RMS XDCV Accuracy 0.005 0.0025 0.001 0.0005Display Count 4000 4000 4000 20000Bargraph X XRanging Manual Auto/Manual Auto/Manual ManualTransistor Test XLogic Probe X XAC/DC Voltage 750 VAC/1000 VDC 750 VAC/1000 VDC 750 VAC/1000 VDC 750 VAC/1000 VDCAC/DC Current 20A 20A 20A 20ACapacitance 4 nF - 40 µF 4 nF - 40 mF 4 nF - 40 mFResistance 400 Ohm to 40

MOhm400 Ohm to 40

MOhm400 Ohm to 40

MOhm200 Ohm, 2 kOhm,

20 kOhm, 200kOhm, 2 MOhm, 20

MOhmFrequency To 4MHz To 40MHz To 40MHz To 200kHzTemperature 58° to 2372°FMin./Max. PeakHold, Rel. Mode

X X

Data Hold X X XDuty Cycle XRS-232Interface andSoftware

X

Mfg. Part No. Description Stock No. Price EachTIC 300HV Tic Tracer - AC Voltage Detector 72M4734 79.95TIC 410A Hot Stick 72M4735 109.95

• Built-in flashlight• Detector glows blue when

AC voltage is present• Detector glows red when it

is at the source• 40V to 300VAC

(147138)

Mfg. part no. LVD1 non-contact AC voltage detector and LED flashlight is combined in one convenient, compact design.With exclusive dual-sensitivity. The voltage detector glows blue when it’s 1-5″ or 2.5-12.5cm away from the source ACvoltage, and glows red when it’s at the source. Detects voltages from 40 V AC to 300 V AC. Voltage detector glows blue50 Hz - 60 Hz or 2.5 - 38 cm (1 - 5″) away from source. Operating temperature 0 °C to 50 °C. Ultra-bright white LED with100,000 hour bulb life. AAA battery included.


T+ US T+ Electrical Tester 30M9569 49.95T+PRO US T+PRO Electrical Tester 30M9570 88.95


T+PRO-1AC KIT T+PRO Electrical Tester and VoltAlert AC Voltage Detector Kit 30M9580 104.95T5-KIT Starter Kit for T5 Electrical Tester 97H3607 40.90AC220 SureGrip Alligator Clips 81C7979 30.10TP1 Flat Bladed Test Probes 83F2783 14.45


1-2388B Basic Test Bench Digital Multimeter 22C6856 149.85389A Test Bench Digital Multimeter with Bargraph 22C6857 155.00390A Test Bench Digital Multimeter with Bargraph, RS-232

Interface and Software22C6858 194.25

391A Test Bench Digital Multimeter with True rms 22C6859 195.00CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT

391A CALIBRATED Test Bench Digital Multimeter with True rms 60K7400 250.00

Mfg. Part No. Description Stock No. Price EachFLUKE-1AC-A1-II VoltAlert AC Voltage Detector, 90 to 1000VAC 55K3325 25.95FLUKE-1LAC-A-II VoltAlert AC Low-Voltage Detector, 20 to 90VAC 55K3327 25.95FLUKE-1AC-A1-II 5 PK VoltAlert AC Voltage Detector Kit, Pkg. of 5 04M4406 109.95

ACCESSORIES

T5-KIT Starter Kit for T5 Electrical Tester 97H3607 40.90AC220 SureGrip Alligator Clips 81C7979 30.10TP1 Flat Bladed Test Probes 83F2783 14.45

• 9 VDC power supply • Audible signal • Lightweight yet rugged • Integrated switchguard • Made in the USA

(90368)

(5416)

(6534)

TEST BENCH® HIGH-PERFORMANCE DIGITALMULTIMETERS

T+ AND T+PROELECTRICAL TESTERS

AC VOLTAGE DETECTORS

Safer than traditional solenoid testers, mfg. part nos. T+ and T+PRO electrical testers use all three voltage detectionmethods: light. sound and vibration, to work more efficiently in noisy environments, dimly lit areas or tight spaces. Mfg.part no. T+PRO is the perfect choice for demanding commercial and industrial applications, with its voltage andcontinuity measurement, a Rotary Field indicator, resistance to 9.99kΩ and a LCD digital display with 0.1V resolutionand ″hold″ feature for easier viewing in hard-to-test areas. Basic electrical tester, mfg. part no. T+ is ideal forresidential electricians and HVAC techs who need a durable, reliable tool for testing voltage and continuity. All modelsinclude test leads and probes, test lead strap for managing leads, two AAA batteries and 2-year manufacturer’swarranty. Mfg. part no. T+PRO-1AC KIT also includes mfg. part no. FLUKE-1AC-II VoltAlert™ pocket-sized,non-contact AC voltage detector. Mfg. part no. T5-Kit is a starter kit for use with the Fluke T5 electrical tester. Includesmfg. part no. TP220 SureGrip test probes with removable comfort grips, mfg. part no. AC285 SureGrip large jawalligator clips and mfg. part no. C33 zippered soft case. SureGrip™ alligator clips are designed to improve steadiness inslippery hands. Blunt tip grabs round screw heads up to 9.5 mm. Includes one pair (red, black) of small, insulated, nickelplated jaws. Mfg. part no. TP1 flat blade design holds securely in blade type electrical wall sockets. Includes one pair(red, black) of slender probe bodies.

• Resistance measurement• Diode check• Frequency measurement• Audible continuity• All current ranges fused• Ruggedized case• Auto power off• Designed to Meet IEC61010-1 CATIII

1000V, Class 2• Three-year manufacturer’s warranty

Mfg. Part No. TIC 300HV Features:

FLUKE-1AC-II/1LAC-IIVOLTALERT NON-CONTACTVOLTAGE DETECTORS

Mfg. Part No. TIC 410A Features:

Mfg. Part No. Fluke 1AC-II and 1LAC-II ac voltage detectors, with VoltAlert™ non-contact voltage detection, are easyto use - just touch the tip to a terminal strip, outlet, or cord. When tip glows red and unit beeps, there’s voltage in the line.Allow users to quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.

389A

• Uses 3 forms of AC/DC voltage detection:light, sound and vibration

• AC/DC voltage: 12 to 600V on LED bar, 10.2to 600V on LCD (T+PRO only)

• Replaceable, heavy-duty test leads• Continuity beeper• Bright LED flashlight• GFCI trip• On/Off switchable beeper• Compliant with NFPA 70E recommendations• UL listed, CSA certified, CE compliant

• Up to 121kV • 48″ long

• The 1AC-II continually tests its battery and itscircuit integrity

• Fluke Voltbeat™ technology• The 1AC-II and 1LAC-II are Category IV – 1000 V

overvoltage rated• Voltage detection of 90 to 1000 VAC, 1LAC-II

range: 20 to 1000 VAC control circuit model• Rugged, reliable, and have two-year warranty

Test Bench® high-performance, multifunctional DMMs include component test capabilities, resistance, and capac-itance. Tough, dual-injection molded case allows for a better grip and more protection for meter. Includes 9V battery,test leads, thermocouple temperature probe (mfg. part no. 390A only) and instruction manual. UL listed, CE compliant.Calibration with printed certification and data report is available on all models, go online or call Newark.

T+PRO

Mfg. part no. TIC 300HV is used to check fuses, breaker panels, power outlets, load breakconnectors, transmission lines, etc. and detects AC voltage without connection. Operatingtemperature 32°F to 125°F (0°C to 52°C).

Features:

TIC 300HV

SPECIFICATIONS

TIC 410A


2208

9


VOLTAGE TESTERS • CLAMP METERS


(79136)

Mfg. Part No. Description Stock No. Price EachTLK-225 SureGrip Master Accessory Set 02J7895 117.00

Specifications 321 322AC Current Range 0-400.0A 0-40.00A, 40.0-400.0AAC Volts 0-400.0V, 400-600V 0-400.0V, 400-600V

L215 SUREGRIP™ KIT WITH PROBE LIGHTAND PROBE EXTENDER

Mfg. Part No. Description Stock No. Price EachLVD2 Volt Light 30M9568 32.10

Mfg. Part No. Description Stock No. Price EachT5-H5-1ACKIT/US Voltage, Continuity and Current Tester Kit w/Holster 02J7897 161.95

(79146)

• Includes L200 Probe Light, TP220 SureGrip™Test Probes, TL224 SureGrip™ Test Lead, TP280Test Probe Extenders, Soft Foldable Pouch

• SureGrip™ Accessories Provide Better Contactfor Better Measurements

• Small, Rugged Light Frees Both Hands for Work• 8″ Test Probe Extenders Keep Hands Always

From Live Circuits

(79157)

(90367)

Mfg. Part No. Stock No. Price Each2557 92N4750 19.97

LVD2 VOLT LIGHT NON-CONTACT AC VOLTAGEDETECTOR AND LED FLASHLIGHT

T5-H5-1AC VOLTAGE, CONTINUITY ANDCURRENT TESTER KIT WITH HOLSTER

(16531)

TLK-225 SUREGRIP™MASTER ACCESSORY SET

Mfg. part no. LVD2 non-contact AC voltage detector and LED flashlight are combined into one easy-to-use, pen-styledesign. Suitable for commercial and industrial applications. Dual levels of detection — blue indicates proximity (1” to 5”)to AC voltage source and red indicates when at the source. CAT IV 600V rated. Includes one AAA battery.

CIRCUIT ALERT™ AC VOLTAGE TESTER

• Precise Low Current Measurements WithBetter Than 2% Basic Accuracy

• Controls Positioned for One-Hand Operation• Auto Shut-Off, Display Hold, Continuity Test• Safety Rating: IEC 1010-2-031, 600V CAT III• Two-Year Warranty• Includes (2) AAA Batteries, Test Leads,

Instruction Card, Safety Information and SoftCarrying Case

• Recommended accessories: H3 Holster,TL223 Test Lead Set, AC285 Alligator Clips

SureGrip™ Set Includes:

Fluke T5-1000 Features:

Mfg. Part No. Description Stock No. Price EachL215 SureGrip Kit with Probe Light and Probe Extender 96H1189 72.55

• AC220 Plunger Style Alligator Clips• AC280 Plunger Style Hook Clips• AC283 Plunger Style Pincer Clips• AC285 Large Jaw Alligator Clips• TP220 Sharp Test Probes• TL224 Right-to-Straight Test Leads• 6-Pocket Storage Pouch

Fluke-321

Non-contact voltage tester detects AC voltage through a fullyinsulated probe tip without the risk of contacting live electricalwires. Dual audible (beeping) and visual (flashing) indicators signalthe presence of AC voltage. Tests from 50-600VAC. Ideal forlocating breaks in wires and voltage at receptacles, switches, andmotors. Quickly locates the hot and neutral terminals in anyreceptacle. Built-in “safe-test” feature indicates tester and batter-ies are operating properly. UL listed.

• Automatically Measures Up to 1000VAC or DC• Measures Up to 100.0A AC• Measures Resistance to 1000Ω• OpenJaw™ Technology Lets You Measure Current

Without Breaking The Circuit

• Dual Sensitivity• Ultra-bright LED light with

100,000 hour-life • Detects from 90 to 600V AC

FLUKE 320 SERIESCLAMP METERS

Fluke VoltAlert™ Features:


T5-600 USA 600V Voltage/Continuity/Current Tester 91F6069 104.95T5-1000 1000V Voltage/Continuity/Current Tester 91F6070 130.95


T5-600 USA CALIBRATED Calibrated 600V Voltage/Continuity/Current Tester 57K9849 144.95T5-1000 CALIBRATED Calibrated 1000V Voltage/Continuity/Current Tester 57K9848 170.95

ACCESSORIES

C520A Leather Tester Case 39C3071 41.70H5 Holster 83F2779 24.05T5-KIT Starter Kit for T5 Electrical Tester 97H3607 40.90

Special value SureGrip™ Master Set is a complete selection of test tool accessories for any industrial application.Includes a convenient toll-up pouch that neatly stores each accessory. 1000V CAR III, 600V CAT IV rated.

• Easy To Use• Detects 90-1000VAC• Fits in Shirt Pocket For

Convenience• Detects Voltage Without

Metallic Contact

Certificate of calibration available on all models, go online or call Newark.


C520A Leather Tester Case 39C3071 41.70H5 Holster 83F2779 24.05T5-KIT Starter Kit for T5 Electrical Tester 97H3607 40.90FLUKE-62/T+PRO/1AC FLUKE-62/T+PRO/1AC Kit with C115 Softcase 09R2347 189.00

H5 Custom Holster

(19028)

• Designed for T5 Tester• Rugged Fabric Holster• Includes Flap for Lead

Stoage• Built-in Belt Loop

T5-1000

FLUKE-T5-600 AND -1000VOLTAGE/CONTINUITY/CURRENT TESTERS• Compact Design with Probe

Storage• Automatically Measures Volts AC

and Volts DC with Precise DigitalResolution

• Resistance and Continuity Beeper• Easy and Accurate OpenJaw™

Current Measurement to 100 A ac• Available in 600V and 1000V

Models• Mfg. part no. T5-600 meets 600

V CAT III safety standards (IEC1010-1)

• Mfg. part no. T5-1000 meets1000 V CAT III, 600 V CAT IVsafety standards (IEC 1010-1)

• UL listed, CSA certified, CEcompliant

Troubleshoots a wider range of problems safer and faster than a traditional solenoid tester. T5 series voltage/continuity/current testers provide a variety of measurements in one compact testing unit. Measure up to 100A AC current and 1000ohm resistance. Mfg. part no. T5-600 measures AC or DC voltage to 600V. Mfg. part no. T5-1000 measures AC or DCvoltage to 1000V. Includes 4mm detachable probes, instruction sheet, and 2-year manufacturer’s warranty. Orderleather carrying case, holster, or starter kit , that attaches to a belt and neatly stows test leads, separately below.Mfg. part no. FLUKE-62/T+PRO/1AC electrical/HVAC combo kit includes compact Fluke 62 IR thermometer teamedwith the full featured T+PRO voltage tester and the easy-to-use 1-AC-II non-contact voltage detector. Use the IRthermometer to test for overheating in electrical devices, then use the electrical test tools to find more about theproblem. Comes complete with soft case.

ACCESSORIES

Mfg. part no. FLUKE-62/T+PRO/1AC electrical/HVAC combo kit includes compact Fluke 62 IR thermometer teamedwith the full featured T+PRO voltage tester and the easy-to-use 1-AC-II non-contact voltage detector. Use the IRthermometer to test for overheating in electrical devices, then use the electrical test tools to find more about theproblem. Comes complete with soft case.

Fluke 62 Mini Infrared Thermometer • Accuracy: ±1.5% of reading • Wide temperature range from -30°C to 500°C (-20°F

to 932°F) • Single point offset laser sighting • Backlit display for poorly lit areas

Fluke T+PRO Voltage and Continuity Tester • Three forms of ac/dc voltage detection: light, sound,

and vibration • Extra heavy-duty, replacement test leads • Safety rated CAT IV 600, CAT III 1000 V• Continuity beeper

Fluke 1AC-II VoltAlert™ Non-ContactVoltage Detector • Voltbeat technology continually tests its

battery and circuitry• Upon detection of voltage, tip glows and

beeper sounds • Voltage detection of 90 to 1000 VAC • CAT IV 1000V

FLUKE-62/T+PRO/1AC



9


CLAMP METERS • PROCESS METERS & CALIBRATORS


FLUKE 320 SERIES CLAMP METERS (CONT.)

Mfg. Part No. Function Resolution and Range Accuracy Notes771, 772, 773 mA

measurement0 to 20.99 mA21.0mA to 100.0 mA

0.2% + 2 counts measured by clamp

772 and 773 mA measurement

0 to 24.00 mA 1% + 5 counts measured in series by test jacks

772 and 773 mA source

0 to 24.00 mA 0.2% + 2 counts Maximum mA drive:24mA into 1,000 ohms

772 and 773 mA simulate

0 to 24.00 mA 0.2% + 2 counts Maximum voltage 50 V dc

773 voltage source

0 to 10.00 V dc 0.2% + 2 counts 2 mA maximum drive current

773 voltage measure

0 to 30.00 V dc 0.2% + 2 counts ...

(148830)

Specifications 321 322DC Volts N/A 0-400.0V, 400-600VResistance Range 0-400.0Ω 0-400.0Ω

Mfg. Part No. FLUKE-333A FLUKE-334A FLUKE-335A FLUKE-336A FLUKE-337AAC Current Range 0-400.0A 0-600.0A 0-600.0A 0-600.0A 0-999.9ADC Current Range N/A 0-600.0A 0-999.9AAC/DC Volts 0-600.0V 0-600.0V 0-600.0V 0-600.0V 0-600.0VResistance Range 0-600Ω 0-600Ω

601-6000Ω0-600Ω

601-6000Ω0-600Ω

601-6000Ω0-600Ω

601-6000ΩTrue-rms No No Yes Yes YesAverage Responding Yes Yes No No No

Mfg. Part No. Description Stock No. Price EachFLUKE-771 Milliamp Process Clamp Meter 30M9567 499.00FLUKE-772 Milliamp Process Clamp Meter 09R2350 695.00FLUKE-773 Milliamp Process Clamp Meter 09R2351 995.00

Mfg. Part No. Description Stock No. Price EachFLUKE-360 AC Leakage Current Clamp Meter 30M2188 642.95

Mfg. Part No. Description Stock No. Price EachFLUKE-333A Fluke-333A Clamp Meter 49M0849 150.95FLUKE-334A Fluke-334A Clamp Meter 50M7408 171.95FLUKE-335A Fluke-335A Clamp Meter 46M4415 231.95FLUKE-336A Fluke-336A Clamp Meter 31M3539 317.95FLUKE-337A Fluke-337A Clamp Meter 30M9512 368.95


FLUKE-335A CALIBRATED Calibrated Fluke-335A Clamp Meter 59M9152 281.95FLUKE-336A CALIBRATED Calibrated Fluke-336A Clamp Meter 54M4076 367.95FLUKE-337A CALIBRATED Calibrated Fluke-337A Clamp Meter 42M9978 418.95

Mfg. Part No. Description Stock No. Price EachFLUKE-321 Type 321 Clamp Meter 39C5515 102.95FLUKE-322 Type 322 Clamp Meter 39C1688 111.95


FLUKE-322 CALIBRATED Calibrated Mfg part no 322 Clamp Meter 57K9820 161.95

(90370)

Mfg. Part No. Description Stock No. Price EachFLUKE-353 AC/DC True-rms Clamp Meter, 2000 A, Amps only 64M1119 585.95FLUKE-355 AC/DC True-rms Clamp Meter, 2000 A 64M1120 706.95

(90373)

(72229)

FLUKE 770 SERIES MILLIAMPPROCESS CLAMP METER

FLUKE-360 AC LEAKAGECURRENT CLAMP METER

(68964)

(103501)

FLUKE 350 SERIESTRUE-RMS 2000ACLAMP METERS

Mfg. part no. FLUKE-360 AC leakage current clamp meter, designed for noninvasive checks of insulation condition,allows user to perform tests without powering down the installation or disconnecting equipment — saving time, withoutcompromising on quality or safety. Unique jaw design eliminates the influence of adjacent current conductors, andminimizes the effects of external magnetic fields, even at low currents — perfect for performing accurate and reliabletests in todays crowded electrical environments. Uses one 3V Lithium button-cell battery. Meter comes complete withsoft carrying pouch and multi-language user’s manual. Overall dimensions: 6.9L x 2.8W x 1″H.

FLUKE-330 SERIESCLAMP METERS

Mfg. part no. FLUKE-771 compact process clamp meter measures mA signal for PLC and control systems analog I/O.Detachable clamp with extension cable allows user to take measurements in tight locations, and the built-in spotlightilluminates hard to see wires in dark enclosures. Features automatic power-off after 15 minutes and 2 minuteautomatic-off for backlight and spotlight. Uses two AA 1.5V alkaline batteries. Meter includes soft carrying case, user’smanual and manufacturer’s warranty: 3-years for electronics, 1-year for clamp cable assembly.

• Reliably handle a wide range of high-current applications with 2000Aac + dc true-rms, 1400A ac, and 2000A dc

• 2.3 in. jaw capacity is suitable for large, or multiple conductors• In-rush current measurement captures ‘power-on′ surge current with

accuracy and repeatability high voltage measurement of 1000V ac +dc true-rms, 600V ac, and 1000V dc allows users to perform multipletests with only one tool (355 only)

• Resistance to 400kΩ coupled with a continuity beeper, provide theconvenience of a multimeter (355 only)

• Accurately measure frequency up to 1kHz for optimum troubleshooting• Quickly analyze readings using the MIN, MAX, and AVG functions• Large backlit display allows for easy visibility in low-lit areas• Use display hold feature to capture readings even when the display

cannot be viewed• Use the low-pass filter to smooth out noisy loads and stabilize readings• CAT IV 600 V, CAT III 1000 V rating for added user protection

• Measures 4-20mA output signals fromtransmitters without breaking the loop

• Measures 10 to 50mA signals in older controlsystems using the 99.9mA range

• Accuracy: 0.2%• Resolution and sensitivity to 0.01mA • Hold function captures and displays changing

measurements • Dual backlit display with both mA measurement

and percent of 4 to 20mA span

• Measures current from from 1mA to 60A with1mA of resolution

• Durable clamp withstands over 50,000operations — wide 1.5″ jaw size

• Dual display — 3200-count digital, 32-segments LCD bargraph

• “Display-Hold” button to capture readings inhard-to-reach places

• Auto power-Off with warning buzzer• Conforms to IEC1010 and EMC standards• Meets safety standard VDE0404-4 and

VDE0702 requirements

• Small Body and Jaws• In-Rush Current Function (Except mfg. part no. FLUKE-333A)

for MeasuringMotor Starting Current

• True-RMS (Except mfg. part nos. FLUKE-333A and -334A)• Large Backlit Display (Except mfg. part nos. FLUKE-333A)• Microprocessor Technology for Low-Current Measurement

Accuracy• Display Hold and Continuity Tester• Frequency Measurement (mfg. part nos. FLUKE-337A): 5 -

400Hz• Auto Shut-Off to Maximize Battery Life• 3-Year Manufacturer’s Warranty• Meets 600V CAT III Safety Standards (IEC 1010-1)• Recommended accessories: H3 Holster, TL223 Test Lead Set,

AC285 Alligator Clips• UL listed, CSA certified, CE compliant

771 Milliamp Process Clamp Meter:

FLUKE-337A

Fluke 350 series clamp meters address the need for accurate high current measurements up to 2000A. Meters comecomplete with C43 soft carrying case, 6 AA batteries, and users manual. Mfg. part no. Fluke-355 also includes TL2241.5 m silicone rubber test leads, TP2 test probes and AC285 alligator clips. Perfect for electrical contractors andindustrial service technicians.

772 and 773 Milliamp Process Clamp Meters:

SPECIFICATIONS

• DC voltage measurement to verify 24 V powersupplies or voltage I/O signals

• Source dc voltage to test input devices that accept a1 to 5 volt or 0 to 10 volt signal

Certificate of calibration available on all models, go online or call Newark.

• Scaled mA output provides a continuous mA signal that corresponds to a 4 to mA signal measured by themA clampOutput signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking theloop

• mA in/out: simultaneously measure the mA signal Apply a mA input signal to a device and measure its’ 4 to 20 mA output on devices such as valves or mAisolators

• Voltage output linear ramp of 25% step outputAutomatically change the voltage output for remote testing

SPECIFICATIONS


2210

9


CLAMP METERS


DIGITAL AC/DC CLAMP-ON MULTIMETERS (CONT.)

Mfg. Part No. Description Stock No. Price Each72-7226 Digital Clamp Multimeter

with Frequency and TrueRMS AC Measurement

45M5526 84.95

72-7224 Digital Clamp Multimeterwith Frequency

45M5525 63.95

Mfg. Part No. Description Stock No. Price EachI5S Low-Level 5A AC Current Clamp 43K8757 433.80I5SPQ3 5A AC Current Clamp 43K8758 997.85

Mfg. Part No. Description Stock No. Price EachFLUKE-902 True-rms HVAC Clamp Meter 05M4770 229.99

Mfg. Part No. Description Stock No. Price EachFLUKE-1630 Earth Ground Clamp Meter 30M9565 1429.95

(147930)

(93047)

(90372)

(85474)

i5s SERIES LOW-LEVEL5A AC CURRENT CLAMP

DIGITAL CLAMP MULTIMETERWITH FREQUENCY

FLUKE 902 TRUE RMS HVACCLAMP METER

FLUKE-1630 EARTH GROUNDCLAMP METER

Mfg. Part No. ACDC-400AC Voltage 600 VDC Voltage 600 VAC AMPS 400A

Mfg. Part No. ACDC-400DC AMPS 400A

Resistance X

Features:

• Ideal for use with Fluke 433 and434 series 3-Phase Power QualityAnalyzers

• Measures 10mA to 5A AC• Accuracy 10mA to 1A: 1% ±5mA

(48 to 65Hz)• Accuracy 1A to 5A: 1% (48 to 65Hz)• Bandwidth from 40Hz to 5kHz• Output level: 400mV/A• Buy the 3-Pack and Save

Mfg. Part No. ACD-15 PROACD-15 TRMS

PRO ACD-16 PROACD-16 TRMS

PROTrue RMS X XAC AMPS 2000A 2000A 1000A 1000A

AC/DC Voltage 600 600 600 600Resistance X X X X

Capacitance X XFrequency X X X X

Temperature X XAC/DC micro-Amps

Non-contact voltmeter X XPC Connection X X

Safety CAT III 600V CAT III 600V CAT III 600V CAT III 600V

True-rms HVAC clamp meter includes two AA alkaline batteries, one pair TL75 test leads, one 80BK integrated DMMtemperature probe, soft carrying case and a users manual with safety information.

• Easy, clamp-on, stakeless testing — no ground stakes required• Measures ground resistance from 0.025Ω to 1500Ω• Measures ground leakage current from 0.2mA to 1000mA • AC current measurement range from 0.2 A to 30A• Continuity loop test with audible alarm• User-defined “HI/LO” alarm limits for rapid measurement evaluation• “Display-Hold” button to capture readings in hard-to-reach places• Time-saving memory function automatically records and stores up to 99

measured values • Automatic self-calibration • Overload protection: 200A

Mfg. Part No. Description Stock No. Price EachACDC-400 400A Clamp-On Digital Multimeter 02J0397 179.95

ACCESSORIES

DKTA-620 Single-to-Dual Input Temperature Adapter 48F5520 29.95TAC-DMM Type-K Temperature Adapter 48F5519 17.95

Mfg. part no. FLUKE-1630 earth ground clamp meter provides ground loop and continuitytesting without breaking the circuit and enables non-intrusive leakage current mea-surement. Ideal for commercial, industrial, and utility applications, such as high-voltagepylon installations, cell phone substations, RF transmitters and inspection of lightningprotection systems. Compact, rugged design features a large, 1.38″ jaw opening toaccommodate a variety of conductors. Meter comes complete with a hard carrying case withshoulder strap, resistance test loop, 9V battery and multi-language user’s manual.


(85524)

Specially configured to provide low-current accuracy while taking measurements on secondary current transformers.Mfg. part no. i5s AC current clamp accommodates conductors up to 0.6″ (15mm). Compact shape makes transportingand storing convenient; the clamp measures only 4. 6 x 1.7 x .9″ (116 x 43 x 23mm) . Takes accurate readings withoutbreaking the circuit. Output cable is 2.5 meters long with BNC connector termination. Rated CAT III 600V (insulatedconductors only). One-year manufacturers warranty.

Mfg. Part No. Description Stock No. Price EachACD-14 PLUS 600A Clamp-On Multimeter with Dual Display 40P3919 99.95ACD-14 TRMS-PLUS 600A Clamp-On Multimeter with Dual Display TRMS 40P3920 139.95ACD-15 PRO Clamp-on, 2000A AC 66K6275 149.95ACD-15 TRMS PRO TRMS Clamp-on, 2000A AC 66K6276 159.95ACD-16 PRO Clamp-on, 1000A AC, PC connection 66K6277 149.95ACD-16 TRMS PRO TRMS Clamp-on, 1000A AC, PC connection 66K6278 169.95

• Designed for HVAC applications with capacitance,DC Current (µA), and temperature measurements

• Small body and jaws fit perfectly in your hand andinto tight places

• Handy ’Display Hold’ button keeps measurementson the display

• Meter controls are positioned so currentmeasurements can be done with one hand (indexfinger on clamp opening lever and thumb on rotaryswitch)

• Large, backlit display is easy-to-see in less thanideal conditions

• Auto shut-off maximizes battery life so the meterworks when you need it

• Three year warranty

(85778)

DIGITAL AC/DC CLAMP-ONMULTIMETERS

i5sPQ3

72-7226

AC CLAMP-ONMULTIMETERS

• 3999 count autoranging display• 1″ Clamp diameter• Diode test• Continuity buzzer• Data hold• Sleep mode• Full icon display• Low battery indicator

SPECIFICATIONS

All are designed to conform to UL, ULc,TÜV, CE, IEC standards, except mfg.part no. ACDC-400 CATIII 600, CE.Also included are test leads, carryingcase, battery, and instruction manual.

SPECIFICATIONS

• DC voltage: 400mV, 4V, 40V, 400V, 600V• AC voltage: 4V, 40V, 40V, 600V• DC current: 40A, 400A• AC current: 40A, 400A• Resistance: 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ• Frequency: 10Hz - 100MHz• Duty cycle: 0.1 - 99.9%• *TRMS AC voltage frequency: 40Hz - 400Hz• *TRMS AC current frequency: 50Hz - 60Hz

*Mfg. part no. 72-7226 only

ACD-15 TRMS PRO

Digital Clamp Multimeter with Frequency Measurement is perfect for general purpose applications. Comes completewith zipper case, test leads, 9V battery and owners manual.

ACD-16 TRMS PRO



9


CLAMP METERS • ANALOG METERS


TEST EQUIPMENT ACCESSORIES

Mfg. Part No. Description Stock No. Price Each12388 (260-8) Analog Voltmeter 62F300 219.4312389 (260-8RT) Analog Voltmeter 62F303 263.2512391 (260-8P) Analog Voltmeter 62F1191 292.3712392 (260-8PRT) Analog Voltmeter 62F2270 335.44

Mfg. part nos. 260-8Xi, 260-8XPi offer the same features in a highly-visible yellow, durable ABS plastic housingdesigned for the toughest environments. Mfg. part no. 260-6XLM has special low power ohms. Mfg. part no.260-6XLMP also features overload protection.

12395(260-8Xi) Analog Voltmeter 50F3533 236.9912396(260-8XPi) Analog Voltmeter 50F3534 309.9312206(260-6XLM) Analog Voltmeter 98F3358 291.1712211 Analog Voltmeter 01B6875 349.55

Mfg. Part No. Description Stock No. Price Each00832 Nylon Case-Yellow* 50F3535 59.1300834 Nylon Case-Black* 50F8971 59.1300805 CASE Leatherette Case* 62F302 73.9900248 Roll-Top Case

(260-8, 8P, 270-5)62F204 59.74

00043 Probe Leads w/ScrewClips (260-8, 8P, 270-5)

62F3012 18.76

00125 Probe Leads w/AlligatorClips (260-6XLM, 6XLMP,8Xi, 8XPi, 228, 229-2)

01B6608 18.76

00545 150-2 AC Amp-Clamp(260-8, 8P, 270-5)

62F2377 117.96

Mfg. Part No. Description Stock No. Price 1-99972-7228 Digital Clamp Amp Meter, TRMS, AC/DC Voltage,

Current, Frequency01N4892 105.00

(5320)

*For use with mfg. part nos. 260-8, 8P, 8Xi, 8XPi, 6XLM, 6XLMP, 270-5, 228, 229-2

Mfg. Part No. Description Stock No. Price Each40027 Model 228 Current Leakage Detector 93F6825 613.7012267 (229-2) Model 229-2 Current Leakage Detector 62F324 333.34

Mfg. Part no. Description Stock No. Price Each12226 (270-5) High Accuracy Analog Voltmeter 62F380 249.2912227 (270-5RT) Analog Voltmeter with Roll-Top Case 16F2247 292.37Mfg. Part No. 330B 313A 350B 369A

Jaw Opening: 2.24″ 0.98″ 2.24″ 2.24″Autoranging: ... X ... ...Bargraph: ... ... X XDisplay Counts: 2000 ... 3200 4000True RMS: ... ... ... XAC (A): 1000 A 600 A 1000 A 1000 ADC (A): ... 600 A ... 1000 AAC (V): 750 V 600 V 750 V 750 VDC (V): 1000 V 600 V 1000 V 1000 VResistance: 2000 Mohm 1 kohm 30 Mohm 40 MohmFrequency: ... ... 32kHZ 400kHzCapacitance: ... ... ... 4 nF-400 nFContinuity: X X X XData Hold: X X X XMax Hold: X ... ... ...Peak Hold: ... ... X XRange Hold: ... ... X XMin/Max: ... ... ... XRelative Mode: ... ... ... X

(116529)

260 SERIES ANALOG VOM


1-2330B Clamp-On Meter 92F385 110.88313A Mini Clamp-On Meter 68H8394 159.00350B Clamp-On Meter 92F383 183.68369B Clamp-On Meter 92F382 224.00

(5376)

DIGITAL TRUE RMS CLAMP METER

The 260 series is for monitoring fluctuating trends and rates.Large color-coded dial with mirrored scale to eliminate paral-lax error. More than 20 measuring ranges for DC voltage, ACvoltage, DC current, resistance, and dB level. Also measuresAC current up to 250A with Mfg. part no. 150-2 amp clampaccessory, ordered separately; go online or call. Mfg. partnos. 260-8P and 260-8PRT also feature additional relayoverload protection that is resettable and audible continuitycheck. Mfg. part nos. 260-8RT and 260-8PRT includeroll-top case. All models include batteries, test leads withalligator clips, and manual. Carrying cases and other acces-sories ordered separately; on this page .

(13528)

(5321)


1-2301 AC Line Separator 54M5379 21.00

MODELS 228 AC/DCAND 229-2 CURRENTLEAKAGE TESTERS

Features:

260-8 and 260-8Xl

270-5 SERIES HIGH-ACCURACY VOM

(85502)

228

Extra-high accuracy VOM for applications requiring criticalmeasurements: 1.25% f.s. DC volt accuracy, 2% f.s. ACvolt accuracy. Large color-coded dial with mirrored scaleto eliminate parallax errors. Self-shielding meter move-ment. More than 20 measuring ranges for DC voltage, ACvoltage, DC current, resistance, and dB level. Also mea-sures AC current with mfg. part no. 150-2 amp clampaccessory, order separately; go online or call. Both modelsinclude test leads with alligator clips, batteries, andmanual. Mfg. part no. 270-5RT comes with roll-top case.Order other accessories separately; go online or call.


229-2

• 5999 count autoranging display • Backlit display • True RMS AC measurement • AC surge current measurement • 10MΩ input impedance • Diode test • Continuity buzzer • Max hold • Data hold • Full icon display • Sleep mode • Low battery indicator • Includes zipper case, test leads, owners manual • Requires one 9V battery (292-035), included

BK PRECISION CLAMP METERS

Model 228 AC/DC is designed to mimic the human body’s sensitivity to electrical shock (Let-Go, reaction, and burnhazard). Model 229-2 detects small leakage currents in appliances, motors, and other equipment. Model 228 complieswith UL, IEC, and ANSI guidelines. Model 229-2 checks both 120 and 240VAC equipment. Conforms to ANSIC101.1-1986 and UL safety standards. Both include test leads, battery, and manual. Carrying cases and other accessoriesordered separately, on this page .

• DC voltage: 6.6V, 66V, 600V (±0.8% +1) • AC voltage: 6.6V, 66V, 600V (±1.2% +5) • DC current: 66A, 1000A (±1.5% +8) • AC current: 66A, 1000A (±2% +8)

BK Precision offers a wide variety of cur-rent clamps for safe non-invasive currentmeasurement. Measure up to 1000A withthese reliable, rugged instruments. Allclamps are much more than a currentclamp offering the ability to measure volt-age resistance, capacitance and even fre-quency. Additionally, special featuresallow for the recording of minimum andmaximum values, peak values, test diodesand for continuity.

• Resistance: 660Ω, 6.6KΩ, 66KΩ, 660KΩ, 6.6MΩ,66MΩ (±1% +2)

• Frequency: 660Hz ∼ 66MHz (±0.1% +3) • Duty Cycle 0.1-99.9%

AC LINE SEPARATOR

Perfect for applications where higher accuracy is critical. This compact clamp meter measures AC/DC voltage, AC/DCcurrent, resistance and frequency.

Used with AC current clampmeter to separate conductors on 110VAC devices with 2-conductor power cords. Separatorplugs into wall outlet and the device is plugged into the separator. Openings in separator then allow X1 or X10 currentmeasurements.

330B 301


2212

9


ANALOG METERS • SIGNAL & FUNCTION GENERATORS


FUNCTION AND SIGNAL GENERATORS

280 SERIES ARBITRARY WAVEFORM GENERATORS (CONT.)

Mfg. Part No. Description Stock No. Price Each72-8170 Deluxe Analog Display VOM 20M0354 31.95

Mfg. Part No. Description Stock No. Price Each72-805 CATV Analog Signal Level Meter 01N4889 613.00

SPECIFICATIONSFrequency Range 0.0MHz to 10MHzFrequency Resolution 7 Digits or 0.1MHzOutput Impedance 50Ω or 600Ω SwitchableAmplitude 5mV to 20V pk-pk Open Circuit (2.5mV to 10V into 50Ω/600Ω)

Output can be specified as V-H: 2

Mfg. Part No. Description Stock No. Price Each291-U 115V 1-Channel 100 MS/s Arbitrary Waveform Generator 61M3743 3515.00292-U 115V 2-Channel 100 MS/s Arbitrary Waveform Generator 61M3744 5325.00294-U 115V 4-Channel 100 MS/s Arbitrary Waveform Generator 61M3745 7730.00

Mfg. Part No. Description Stock No. Price Each281-U 115V 1-Channel Arbitrary Waveform Generator 43K0434 2125.00282-U 115V 2-Channel Arbitrary Waveform Generator 43K0435 3620.00

(92286)

Mfg. Part No. Description Stock No. Price Each284-U 115V 4-Channel Arbitrary Waveform Generator 43K0436 5860.00Y200H 19″ Rack Mounting Kit, Half-Rack for Type 281 43K0432 345.00Y200F 19″ Rack Mounting Kit, Full-Rack for Types 282 and 284 43K0431 345.00

3001

(114929)

Mfg. Part No. Description Stock No. Price Each271-U 115V Direct Digital Synthesis (DDS) Function Generator with ARB 43K0433 1595.00Y200H 19″ Rack Mounting Kit, Half-Rack 43K0432 345.00

(102973)

CATV SIGNAL LEVEL METER

DELUXE ANALOG DISPLAY VOM

(85277)

(85278)

290 SERIES WAVEFORMGENERATORS

Fully portable, compact signal level meter is essential when installing CATV or off–air antenna systems. Easily verifyproper signal level of any channel at each drop throughout a structure. FM demodulator and internal speaker provideaudio output of measured channel. Compact ergonomic unit is less than 9″ tall, and is easily held in one hand. InternalNiMH battery with included wall charger. Battery life: 5-8 hours. Includes carry case, carry strap and manual

FLUKE-271 DIRECT DIGITAL SYNTHESIS (DDS)FUNCTION GENERATOR WITH ARB

280 SERIES ARBITRARYWAVEFORM GENERATORS

4011A

• Large three-color mirrored scale• Carry handle doubles as a stand• Continuity buzzer

• Direct channel input of off–air channels 2-69 andCATV channels 2-136

• Direct frequency input from 5-870MHz• Simultaneously displays video carrier and audio carrier

strength• Selectable dBmV and dBµV units• Spectrum scan and channel scan modes• Tilt measurement of seven user definable channels• Carrier/noise ratio measurement • Trunk voltage measurement • Self recalibration• Large 11⁄2″ x 21⁄4″ dot matrix LCD display• Data logging• RS-232C port with serial print function

SPECIFICATIONS

• Four row alphanumeric LCD • Arbitrary capability with storage for five user defined

waveforms • Multiple standard and complex waveforms recalled from

internal memory • Extensive modulation capabilities include Sweep, AM, Gating,

Trigger/Burst, FSK and Hop• Variable symmetry, variable duty cycle • RS-232 and IEEE-488 interfaces

• Powerful modulation capabilities • Built-in trigger generators • Multi-channel phase locking and summing • Waveform Manager Plus for Windows® software

included• Multiple standard waveforms recalled from

internal memory • RS-232 and IEEE-488 interfaces

Deluxe Analog Display VOM is perfect for educational purposes or in applications where unstable readings make digitaldisplays inconvenient. Comes complete with test leads, instruction manual, one 9V battery and two AA batteries.

• Choice of 1, 2 and 4 independent or linkedchannels

• 100 MS/s 12-bit arbitrary waveform capability• 1M point waveform memory• 40 MHz function generator capabilities using DDS

(50MHz for square waves)

• 10ns pulse pattern generator• Waveform sequencing with up to 1024 segments• Unlimited waveform storage using CF® memory

card• Waveform Manager Plus software for Windows• USB interface in addition to RS-232 and GPIB

• DC voltage: 600mV, 3V, 12V, 60V, 300V, 1000V• AC Voltage: 600mV, 3V, 12V, 60V, 300V, 1000V• DC Current: 120uA, 3mA, 30mA, 300mA, 10A• Resistance: x1Ω, x100Ω, x1KΩ, x10KΩ• Battery Test: 1.5V @ 300mA, 9V @ 30mA• Continuity: Audible indication, less than 100Ω• Input Impedance: 20KΩ/V (DC), 9KΩ/V (AC)• Dimensions: 6.7″ x 4.9″ x 1.9″ (H x W x D)

Features:

• Choice of 1, 2 and 4 independent or linked channels• Uses Direct Digital Synthesis (DDS) techniques• 40MS/s max. sampling speed • 16MHz function generator • 10MHz pulse generator • Pulse train pattern generator • 12-bit arbitrary generator • Link 16 (max.) arbitrary waveforms in a sequence

Mfg. part no. 271 is a high-performance function generator using Direct Digital Synthesis (DDS) techniques. Standardwaveforms include: sine, square, positive pulse, negative pulse, triangle, ramp up, ramp down. Additionally arbitrarywaveforms include multi-level squarewaves, waveform hopping and pseudo-random noise. Extensive modulationcapabilities make this a highly versatile signal source. Up to five arbitrary waveforms of 1024 10-bit words can be storedin non-volatile memory. All waveforms can be swept over their full frequency range at a rate variable between 10milliseconds and 15 minutes. All functions are accessible via the front panel. Size: 3U, 5.11’’ (130mm) high; half-rack8.34’’ (212mm) wide, 12.99’’ (330mm) deep. Weight: 9 lbs. Power: 110 to 120VAC or 220 to 240VAC +/– 10 %,50/60Hz AC by internal adjustment. Includes user manual, power cord. Order mfg. part no. Y200H 19″ rack mountingkit separately below. Also available, mfg. part no. SW200ARB Window®-based Waveform Manager Plus software,allows advanced waveform creation, editing and management; order separately, go online or call.

Mfg. Part No. Sine Square Triangle TTL CMOS Pulse Ramp Burst Stock No.4011A X X X X X X X 22C68604017A X X X X X X X 22C68614017B X X X X X X X 36M23693001 X X 90F23124040A X X X X X X X X 96B40964012A X X X X X X X 97J8431

Features:

290 series uses Direct Digital Synthesis techniques and variable clock sampling technology to provide fully featuredprogrammable function and arbitrary waveform capability, combining many generators into one instrument. Signalsimulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator,trigger generator, tone generator, and amplitude modulation source. Maximum arbitrary waveform size is 1 M points. Upto 500 user-defined waveforms may be stored on the removable memory card. Arbitrary waveforms can be defined byfront panel editing controls, by downloading of waveform data via RS-232,USB or GPIB, or by writing directly to theremovable memory card using the USB card reader/writer connected to a PC. Waveforms: Sine, square, triangle, DC,positive ramp, negative ramp, sin(x)/x, pulse, pulse train, cosine, haversine and havercosine.

280 series universal waveform generators combine many generators in one instrument. Their extensive signalsimulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator,trigger generator, tone generator, and amplitude modulation source. These waveform generators use Direct DigitalSynthesis (DDS) techniques and variable clock sampling technology to provide a fully featured programmable functionand arbitrary waveform capability. Standard waveforms include: sine, square, triangle, dc, positive ramp, negativeramp, sine(x)/x, pulse, pulse train, cosine, haversine and havercosine. By using the Versatile Pulse generator capabilitieseach channel can generate complex pulse trains. Fully programmable via RS-232 or IEEE-488 interfaces. All functionsare accessible via the front panel. Size: 3U, 5.11’’ (130mm) high; half-rack 8.34’’ (212mm) wide, 12.99’’ (330mm) deep.Weight: 9 lbs. Power: 110 to 120VAC or 220 to 240VAC +/– 10%, 50/60Hz AC by internal adjustment. Includes powercord, user manual, and WIndow®-based mfg. part no. SW200ARB Waveform Manager Plus software, that allowsadvanced waveform creation, editing and management. Order mfg. part no. Y200H or Y200F 19″ rack mounting kitseparately below.

291

281


292-294

284



9


SIGNAL & FUNCTION GENERATORS • SPECTRUM ANALYZERS


FIELDFOX RF ANALYZER (CONT.)FUNCTION AND SIGNAL GENERATORS (CONT.)

(148833)

Frequency Range 100 kHz to 3 MHzSetting Resolution 1% of Reference LevelResolution Bandwidth 30 Hz to 1 MHz in 1-3-10 SequenceDisplayed Average Noise Level (DANL) -126 dBm at 50 MHzSweep Time 10 ms to 1000 sFlatness ±3 dB at 50 MHz3rd Order Intercept +10 dBm

Mfg. Part No. Description Stock No. Price EachN9340B Hand-Held 3 GHz RF Spectrum Analyzer 94M4922 7987.00

Mfg. Part No. DescriptionStockNo.

PriceEach

N9912A-104 FieldFox RF Analyzer with 4GHz Cable and Antenna Analyzer 46P5209 7614.00N9912A-106 FieldFox RF Analyzer with 6GHz Cable and Antenna Analyzer 46P5210 8617.00

FIELDFOX OPTIONS

OPTION 110 Transmission Measurement Software Upgrade Key for InsertionLoss or Gain Measurement

46P5211 1363.00

OPTION 111 QuickCal Calibration Software Upgrade Key 46P5212 952.00OPTION 230 4GHz Spectrum Analyzer Capability Software Upgrade Key — For

N9912A-104 Only46P5213 3706.00

OPTION 231 6GHz Spectrum Analyzer Capability Software Upgrade Key — ForN9912A-106 Only

46P5214 6713.00

OPTION 235 Preamplifier Software Upgrade Key for Spectrum AnalysisCapability (Requires Option 230 or 231; order separately above)

46P5215 751.00

OPTION 302 External USB Power Sensor Support Software Upgrade Key 46P5216 500.00OPTION 303 Network Analysis Capability Software Upgrade Key for 1 Port

(Requires Option 110 for 2nd Port; order separately above)46P5217 8114.00

OPTION 308 Vector Voltmeter Software Upgrade Key 46P5218 1550.00FIELDFOX ACCESSORIES

N9910X-800 T-Calibration Kit, DC-6GHz, Type-N(m) 46P5190 651.00N9910X-801 T-Calibration Kit, DC-6GHz, Type-N(f) 46P5191 892.00N9910X-802 T-Calibration Kit, DC-6GHz, 7/16 DIN(m) 46P5192 892.00N9910X-803 T-Calibration Kit, DC-6GHz, 7/16 DIN(f) 46P5193 892.00N9910X-810 Rugged Phase Stable Cable, Type-N(m) to Type-N(m), 5-ft. 46P5194 550.00N9910X-811 Rugged Phase Stable Cable, Type-N(m) to Type-N(f), 5-ft. 46P5195 550.00N9910X-812 Rugged Phase Stable Cable, Type-N(m) to Type-N(m), 12-ft. 46P5196 782.00N9910X-813 Rugged Phase Stable Cable, Type-N(m) to Type-N(f), 12-ft. 46P5197 782.00N9910X-820 Antenna, Directional, Multiband, 800-2500MHz, 10dBi 46P5198 500.00N9910X-821 Antenna, Telescopic Whip, 70MHz - 1GHz 46P5199 50.02

FIELDFOX ACCESSORIES

Mfg. Part No. DescriptionStockNo.

PriceEach

N9910X-843 Coaxial Adapter, Type-N(m) to 7/16 DIN(f) 46P5200 80.23N9910X-845 Adapter Kit:Type-N(f) to 7/16 DIN(f), Type-N(f) to 7/16 DIN(m), Type-

N(f) to Type-N(f)46P5201 156.00

N9910X-860 Fixed Attenuator, 40dB, 100W, 3GHzDC, Type-N(m) to Type-N(f) 46P5202 601.00N9910X-861 Fixed Attenuator, 40dB, 50W, 8.5GHzDC, Type-N(m) to Type-N(f) 46P5203 487.00N9910X-870 Replacement Battery 46P5204 100.00N9910X-872 External Battery Charger 46P5205 276.00N9910X-873 AC/DC Adapter 46P5206 151.00N9910X-874 External Bias-Tee, 2.5MHz to 6GHz, 1W, 0.5A 46P5207 201.00N9910X-881 Hard Transit Case 46P5208 401.00

Mfg. Part No. Description Stock No. Price Each2650A Handheld 3.3 GHz Spectrum Analyzer 09R1812 6450.002652A Handheld 3.3 GHz Spectrum Analyzer with Tracking Generator 09R1813 8450.002658A Handheld 8.5 GHz Spectrum Analyzer 09R1814 10995.00

ACCESSORIES

CC265 Deluxe Spectrum Analyzer Accessory Kit for 2650/2650A Series 54M4448 155.00CC560 Deluxe Spectrum Analyzer Accessory Kit 75M0242 650.00

(94377)

(141917)

(147959)

FIELDFOX RF ANALYZER

HAND-HELD 3GHZ RFSPECTRUM ANALYZER

HAND-HELD SPECTRUMANALYZERS, 3.3 GHzAND 8.5 GHz• Frequency range 50kHz to 3.3GHz or 8.5GHz• Portable, weighs 1.8 kg including the battery• 4 hour battery life; easy-to-replace rechargeable lithium-ion battery• USB interface for PC connectivity• PC software for remote control and documentation of measurement

results• Conveniently save measurement data to USB flash drive• Large easy-to-read color display• External trigger for zero span measurements• SCPI-like remote control commands

• Cable and antenna analyzer for return loss, one-port cable loss,distance to fault, line sweeping, and VSWR measurements

• Vector network analysis display (S11, S21, phase, and Smith chart) • Built-in spectrum analyzer• Optional preamplifier; order separately below

• 6.5″ transflective LCD with 640 x 480 resolution• Multi-language user interface: 11 languages• Modern USB connectivity for PC control and data transfer• Low SSB phase noise helps detect low signals close to carrier• Narrow RBW helps to resolve close-in signals• Measurement applications for HD radio and DSL interference

testing• Four hours of battery life

N9912A series 4GHz or 6GHz FieldFox RF analyzer is an integrated hand-held instrument for wireless networkinstallation and maintenance. Combines 4GHz or 6GHz cable/antenna analysis, spectrum analysis, power metermeasurements and vector network analysis into one rugged, compact, lightweight and weather-resistant package.Comes complete with AC/DC adapter, lithium ion battery, soft carrying case, user manual, CD-ROM with FieldFox DataLink software and one-year manufacturer’s warranty. Order license key software upgrade options and accessoriesseparately below.

Full-featured spectrum analyzers are compact, light weight for quick and precise signal investigations. Built-in trackinggenerator to rapidly determine transmission characteristics of 2 port devices (model 2652A). Measurement functions:channel and adjacent channel power, occupied bandwidth, electric and magnetic field strength. Smart one button “AutoTune″ function automatically scans the full frequency range, detects and centers the maximum signal, and configuresoptimum values for RBW, VBW, sweep time and reference level. All models include AC adapter, PC software and USBcable, lithium-ion battery, soft carrying case, accessory pouch and users manual.

Mfg. part no. N9340B provides good usability and exceptional performance for installation and maintenance, spectrummonitoring, and on site tasks. Supports one-button measurement in occupied bandwidth, channel power and adjacentchannel power ratio, virtually eliminating set up time in the field. Comes with multi-language quick start tutorial,CD-ROM of manual, and a soft carrying case. 3 GHz pre-amplifier, 3 GHz tracking generator and a hard-side transit caseare available; go online or call.

Features:

NON-CALIBRATED

Measurements:


1-24011A 5MHz Function Generator 22C6860 371.854017A 10MHz Sweep Function Generator 22C6861 465.094017B 10MHz DDS Sweep Function Generator 36M2369 582.753001 Audio Generator 90F2312 94.084040A 20MHz Sweep Function Generator 96B4096 728.004012A 5MHz Sweep Function Generator 97J8431 375.00

Calibration:

SPECIFICATIONS

• Integrated QuickCal allows user to calibrate FieldFox without a calibration kit, providing worry-free accuracyand repeatability

• Immediate calibration with FieldFox’s CalReady makes unit calibration ready at the test port immediatelyfollowing power-up

• Broadband calibration with automatic interpolation eliminate re-calibration when test frequency or number ofpoints changes

• Mechanical open, short, load calibration support

(5299)

Cable and Antenna Analyzer:• Frequency range: 2MHz to 4GHz or 6GHz• Directivity: > 42dB • Measurement speed: 1.5ms / per pointNetwork Analyzer:• Vector measurements, S11 phase and S11

magnitude• Scalar measurement, S21 magnitude• Display: log, linear, phase, VSWR, Smith chart

Spectrum Analyzer:• Frequency range: 100kHz to 4GHz or 6GHz• DANL (Displayed Average Noise Level): -148dBm• Phase noise: -88dBc at 10kHz • TOI (Third Order Inter-modulation distortion): +18dBm • Sweep speed: 1 second / full span (6GHz) Power Meter:• 9kHz to 24GHz • U2000 Series USB power sensor dependent

Features:

• SD flash card slot for additional data storage• USB ports for convenient data transfer• Connector covers help keep dust out• Convenient side strap makes it easy to hold and carry• Meets MIL-PRF-28800F Class 2 specification• Dimensions: 11.5”H x 7.4”W x 2.8”D (292 x 188 x 72mm)• Lightweight: 6.2 lbs/2.8kg including battery

• Bright 6.5” color anti-glare LCD display with LED backlight• Task-driven keys are grouped to easily perform standard

field measurements• Portrait design and large buttons for easy operation, even

with gloves on• Dedicated marker keys for quick marker function access• Backlit keypad• Easily accessible battery compartment• LAN port for fast data transfer


2214

9


SPECTRUM ANALYZERS • DATA ACQUISITION • PROCESS METERS & CALIBRATORS



1-22630 Spectrum Analyzer 52F6288 2458.40

Mfg. Part No. Description Stock No. Price EachMP MeasuringPAD: Color touch LCD display, AC Power adapter/

battery charger, carry strap, one MP-32M 32 Megabyte CompactFlash Memory Card, user guide

59K9488 4850.00

MP600V High Voltage POD 59K9502 175.00MP300V Medium Voltage POD 59K9501 175.00MP30V Low Voltage POD 59K9500 175.00MP20MA Low Current POD 59K9499 175.00MPUT Thermocouple POD 59K9498 200.00MP-32M 32M memory 59K9496 105.00MP-64M 64M memory 59K9497 160.00MP-128M 128M memory 59K9495 265.00MP-SSC Soft Sided Carry Bag 59K9494 145.00MP-RSC Re-usable shipping container 59K9493 305.00FR-USB FLASH Reader USB 59K9487 135.00MP-HVC High Voltage Cable Set 59K9491 325.00MP-LVC Low Voltage Cable Set 59K9492 236.00


1-24 25-249EL-USB-3 0-30VDC USB Datalogger 80K5461 92.56 81.27EL-USB-4 4-20mA USB Datalogger 80K5462 92.56 81.27

(85556)

(6515)

(88047)

VOLTAGE AND CURRENT USB DATA LOGGERS

MEASURINGPAD ALL-IN-ONE DATAACQUSITION SYSTEM

SPECTRUM ANALYZER

• Frequency Range: 0.15MHz to 1050MHz• 41⁄2-Digit Display (Center and Marker Frequency: 0.1MHz

Resolution)• –100 to +13dBm Amplitude Range• Dynamic Range: 80dB• Level Accuracy: ±2dB• 100kHz/div to 100MHz/div Spanwidth• Frequency Accuracy: ±100kHz• 4 x 10dB Attenuators

Provides live readout of up to 16 differential analog channels sampling at 10 kHz/input and 8 digital TTL-level samplingat 40 kHz/channel. Interchangeable input pods provide instrument versatility as user can quickly change measurementscheme by varying pods (thermocouples, current sources, and voltage sources). Digital inputs may be used to triggerdatalogging, perform counting and timing operations, and monitor frequency and quadrature. Additional cross-channelmath calculations can be used to display and monitor process variable such as efficiency, horsepower, and signalmin/max/avg values. MeasuringPAD monitors data continuously, records automatically and “by exception” using limit-sensitive and logicon/off triggers (by event). Data is stored internally on removable memory card and may be easily exported without anyspecial software or equipment. Records pre- and post-trigger data up to 10,000 times/second.Data may be displayed in a variety of formats, including bargraphs, trend charts, oscilloscope mode, and DiscreteFourier Transforms for harmonic analysis. Touch screen pages are intuitive and speed setup. Multiple setups can bestored for instant reloading.

The EL-USB-3 accepts voltage inputs from 0-30VDC, permitting the record-ing of measurements from a wide range of sensors. EL-USB-4 enables quickand easy monitoring of manufacturing processes with a 4-20mA range.Connection to the circuit is via screw terminals housed in the cap.

Mfg. Part No. Description Stock No. Price EachFLUKE-718-1G 1psi Pressure Calibrator 83K0435 1995.00FLUKE-718 30US 30psi Pressure Calibrator 48F2059 1995.00FLUKE-718 100US 100psi Pressure Calibrator 48F2060 1995.00FLUKE-718-300G 300psi Pressure Calibrator 83K0436 1995.00FLUKE-718EX 300 Intrinsically-Safe 300psi Pressure Calibrator 14N6781 2795.00

• 0-30VDC (EL-USB-3) or 4-20mA (EL-USB-4) measurement range• USB interface for setup and download• More than 32,000 reading capacity• Programmable sample rates from 1 sec. to 12 hrs.• Two progammable alarm threshholds with LED indication• Replaceable internal battery (included)• Connection via screw terminals in cap• Includes free Windows® data logging configuration and graphing software

• Multipurpose data acquisition solution for maintenance,troubleshooting, quality control, variable speed drive, andenergy measurement applications

• Combines the latest high-speed data acquisition technologywith a user-friendly front end

• Rapidly collects, monitors, and displays multiple sensorinputs

• Ideal for troubleshooting, process tuning, fault recording,control-loop monitoring, R&D, and trend analysis

• Color icon-based touch screen and super-simple setups

• Input Impedance: 50Ω• AM/FM Demodulation• 6″ CRT• Built-in Tracking Generator

• TG Level: –50dBm to +1dBm• TG Attenuation: 0 to 40dB (4 x 10dB)• TG Output Impedance: 50Ω• Comes Complete with Instruction Manual and Power Cord

Mfg. Part No. 789 787 715 707, 707EX 705VDC 0 to 20mA DC 0 to 20 0 to 20 0 to 24 0 to 20 0 to 2024V Loop Supply X X X X

MEASUREMENTSVDC 1000 1000 10 28 28VAC True-rms 1000 1000Ohms 40MΩ 40MΩmA DC 1000 1000 24 24 24mA AC 1000 1000Frequency 20kHz 20kHzMin./Max. X XHold X XIEC 61010 Category Cat. IV Cat. III

Mfg. Part No. Description Stock No. Price EachFLUKE-705 Loop Calibrator 48F2058 599.00FLUKE-707 Loop Calibrator with ″Quick Click″ Control Knob 39C2941 649.00FLUKE-707EX Intrinsically-Safe Loop Calibrator with ″Quick Click″

Control Knob63H2496 949.00

FLUKE 715 Voltage/mA Calibrator 83F4183 895.00FLUKE 787 ProcessMeter 91F6067 699.00FLUKE-789 ProcessMeter 81C7984 795.00


FLUKE 715 CALIBRATED Voltage/mA Calibrator 60K7384 985.00FLUKE 787 CALIBRATED Calibrated ProcessMeter 60K7405 818.00

FLUKE-718 AND FLUKE-717SERIES PRESSURE CALIBRATORS

(34070)

FLUKE-718 Series

FLUKE-718 SERIES

HAND-HELD LOOP CALIBRATORS

FLUKE-717 Series

These powerful loop calibrators are ideal for loop calibration, maintenance and repair applications. Mfg. part no. 707features a one-handed user interface with ″Quick-Click″ detented knob making it extremely fast and easy to use. Itsintrinsically-safe version, mfg. part no. 707EX, is for use in explosion endangered areas and is certified in accordancewith the ATEX directive (Ex II 2 G Eex ia IIC T4) in Zones 1 and 2, ZELM 02 ATEX 0120 X. All models come complete withalligator test clips, safety-designed test lead set, protective holster with Flex-Stand™, one 9V battery (mfg. part no. 789has four AA batteries), instructions and a three-year manufacturer’s warranty (mfg. part no.707EX has a one-yearmanufacturer’s warranty and includes Instruction manual on CD-ROM). Mfg. part nos. 787 and 789 ProcessMeter™also include Quick-Reference guide and users manual. Recommended accessories: Mfg. part no. C50 Case, Mfg. partno. TL71 Test Leads, Mfg. part no. TPAK Meter Hanger (for 705 and 707), Mfg. part no. C25 Case, Mfg. part no. T71Test Leads, Mfg. part no. AC72 Alligator Clips (for 715) Mfg. part no. C116 Case, Mfg. part no. TLK225 Accessory Set,Mfg. part no. Mfg. part no. Meter Hanger (for 787 and 789).

FLUKE-718 and FLUKE-717 series pressure calibrators include: protective yellow holster, test leads, alligator clips,single 9V alkaline battery (two with FLUKE-718 series models), instructions and three-year manufacturer’s warranty.NOTE: Pressure may also be measured using 1 of 29 mfg. part no. 700Pxx pressure modules ordered separately; goonline or call.

FLUKE-705 FLUKE-789

• DC current measurement: 0 to 24mA• Loop supply: 24VDC• Min./Max. and Hold Functions• Clear, 5-digit display• EMI tolerant, dust- and splash-resistant• CSA certified, CE compliant• Recommended accessories - TL220 Test

Lead Set, 700PTP Pneumatic Test Pump

787

FLUKE-718 AND -717 SERIES MODELS

FLUKE-715

FLUKE-718 SERIES MODELS ONLY• Built-in hand pump — sources -11psig to

full scale

COMPARISON AT A GLANCE:SOURCES

FLUKE-707



9


PROCESS METERS & CALIBRATORS


RTD AND THERMOCOUPLE CALIBRATORS (CONT.)FLUKE-718 AND FLUKE-717 SERIES PRESSURE CALIBRATORS (CONT.)

Function Measure or Source Range Resolution Accuracy NotesPressure719-30G

-12 to 36 psi,-850 mbar to 2.4

bar

0.001 psi, 0.1mbar

0.025 % Range

6 month spec., 0.035% of

Range for 1 year

Pressure719-100G

-12 to 120 psi,-850 mbar to 8

bar

0.01 psi, mbar

mA0 to 24 mA 0.001 mA 0.015% Rdg + 2

counts

Max load, 1000 Ω

750 Ω in HART mode

Loop Supply 24 V dc N/A 10% ...

Mfg. Part No. Description Stock No. Price EachFLUKE-719 30G Electric Pressure Calibrator, 30 PSI 08P4409 2795.00FLUKE-719 100G Electric Pressure Calibrator, 100 PSI 08P4408 2795.00

Meaure/SimulateMfg. Part No.

FLUKE-712 FLUKE-714 FLUKE-724Thermocouple Types

... J, K, T, E, R, S, B, L, U

J, K, T, E, R, S, B, L, U, N, XK, BP

mV ... -10 to 75 -10 to 75mA DC ... ... 24

Measure Only

Mfg. Part No. FLUKE-725, -725EX FLUKE-726Documenting ... Memory Storage for

up to 8 CalibrationsmA Accuracy 0.025% 0.015%RTD Accuracy 0.33C 0.15CRTD Coefficient ... XPressure+ 29 Rgs., 0.05% 29 Rgs., 0.05%Switch Test ... XTC/RTD Ranges 12/7 12/8Error Calculation ... X

Meaure/SimulateMfg. Part No.

FLUKE-712 FLUKE-714 FLUKE-724RTD -200° to 800°C ... -200° to 800°CRTD Types

Pt 100, 200, 500, 1000 (385);Pt 100 (392); Pt 100 (392) JIS;

Ni120 (672)

... Pt 100, 200, 500, 1000 (385); Pt 100 (393); Pt 100 JIS; Ni120

Resistance 15 to 3200Ω ... 15 to 3200ΩThermocouple ... -200° to 1800°C -200° to 1800°C

(134285)


FLUKE-725 US Multifunction Process Calibrator 48F6885 2095.00FLUKE-725EX Intrinsically-Safe Multifunction Process Calibrator 19K1381 2895.00FLUKE-726 Precision Multifunction Process Calibrator 64K0072 2795.00

Mfg. Part No. Description Stock No. Price EachFLUKE 712 RTD Process Calibrator 83F4179 895.00FLUKE 714 Thermocouple Calibrator 83F4182 895.00FLUKE-724 Temperature Calibrator 10C2607 1595.00


FLUKE-724 CALIBRATED Temperature Calibrator 60K7394 1725.00

FLUKE 719 ELECTRICPRESSURE CALIBRATORS

FLUKE-717 SERIES

Mfg. Part No. Description Stock No. Price EachFLUKE-717-1G 1psi Pressure Calibrator 83K0428 995.00FLUKE-717 30G 30psi Pressure Calibrator 83F9129 1095.00FLUKE-717 100G 100psi Pressure Calibrator 55C4468 1095.00FLUKE-717-300G 300psi Pressure Calibrator 83K0431 995.00FLUKE-717-500G 500psi Pressure Calibrator 83K0433 995.00FLUKE-717-1000G 1000psi Pressure Calibrator 83K0429 1095.00FLUKE-717-1500G 1500psi Pressure Calibrator 83K0430 1095.00FLUKE-717-3000G 3000psi Pressure Calibrator 83K0432 1095.00FLUKE-717-5000G 5000psi Pressure Calibrator 83K0434 1095.00

Features:

Mfg. Part No. Description Stock No. Price EachFLUKE 700TC1 10-Piece Thermocouple Plug Kit 83F4188 79.00

Mfg. part no. FLUKE-700TC2 kit contains seven thermocouple mini-plugs supporting the most popular thermocoupletypes supported by mfg. part nos. FLUKE-714 and FLUKE-724 calibrators. The kit includes: two Type J (black), twoType K (yellow), one Type T (blue), one Type E (purple), and one Type R/S (green).

FLUKE 700TC2 7-Piece Thermocouple Plug Kit 83F4189 69.00

(34075)

• Electric pump for one handed pressure calibration• Best in class pressure measurement uncertainty of 0.025%• Measure and source mA with best in class 0.015% accuracy• Precision pressure adjust vernier • Variable release rate bleed valve for easy pressure adjustment• Ideal performance for high accuracy transmitter calibration• Programmable pump limit allows:

Protection from damage due to over-pressurizationThe user to program target pressures for pumping

• Extended measurement range with any of twenty nine (29) 700Pxx PressureModules

• Source mA with simultaneous pressure measurement to test valves and I/Ps • Simulate mA signals to troubleshoot 4-20 mA loops• Test pressure switches with built in switch test function• Power transmitters during test using 24 V loop supply with simultaneous mA

measurement• Proven cleanout ports reduce pump failures

FLUKE-725

(65175)

With built-in electric pump, the Fluke 719 provides pressure calibrator makes it possible to calibrate and test pressuredevices quickly and easily with one hand saving valuable time. Use the programmable pump limit settings to avoidover-pressurization, and to set ’pump to’ pressure values. The unique cleanout port design reduces pump failures, andmakes the 719 easy to clean without repair. The compact, lightweight form, combine with one-handed use, makes thispressure calibrator the ideal tool for process professionals.

RTD AND THERMOCOUPLECALIBRATORS

FLUKE-725 AND FLUKE-726MULTIFUNCTION PROCESSCALIBRATORS

Mfg. part no. FLUKE-700TC kit contains 10 thermocouple mini-plugs supporting each of the thermocouple typessupported by the mfg. part nos. FLUKE-714 and FLUKE-724 calibrators. The kit includes one each of the following:Type J (black), Type K (yellow), Type T (blue), Type E (purple), Type R/S (green), Type B or Cu (white), Type L (J-DIN)(blue), Type U (T-DIN) (brown), Type C (red), and Type N (orange). Recommended accessories: Mfg. part no. C25 Case,Mfg. part no. TL71 Test Leads, Mfg. part no. TPAK Meter Hanger (for 724), Mfg. part no. C25 Case, Mfg. part no. T71Test Leads, Mfg. part no. AC72 Alligator Clips (for 714), Mfg. part no. TL220 Test Leads, Mfg. part no. TPAK MeterHanger (for 724).

Mfg. part no. FLUKE-725 multifunction process calibrator is a powerful, yet easy-to-use field calibrator for themaintenance and troubleshooting of process control instrumentations. Mfg. part no. FLUKE-725EX, its intrinsically-safe version, is able to calibrate almost any process instrument likely to need service in an area where explosive gassesmay be present and is in compliance with safety specfications ATEX II 1 G EEx ia IIB 171°C KEMA 04ATEX 1303X; I.S.Class I, Division 1 Groups B-D, 171°C. Mfg. part no. FLUKE-726 precision multifunction process calibrator is designedspecifically for broader workload coverage, calibration power and unsurpassed accuracy. It interprets results withoutthe help of a calculator and stores measurement data for later analysis. All models operate on 4 AA batteries and comecomplete with one-set each of mfg. part no. TL75 test leads, mfg. part no. AC72 alligator clips, and stackable testleads, plus a product manual and a users guide on CD.

FLUKE 719

FLUKE-726

FLUKE-714


FLUKE-724FLUKE-712

• Precise measuring and calibrating — accuracies of 0.01%• Transmitter error % calculation — no calculator needed• Memory storage for later analysis• Enhanced flow meter testing with frequency pulse train source mode• HART mode inserts 250Ω resistor in mA measure• Integrated pressure switch test• Custom RTD curves for enhanced temperature measurement• Voltage input protection for improved reliability

FLUKE-726 Only:

THERMOCOUPLE PLUG KITS

All Models:


• Streamlined, hand-held design• Reliably-built to stand up to tough field use• Two-channel, measure/source screen, for viewing input and output simultaneously• Easy-to-read display with backlight for poorly lit areas• Measures volts, mA, RTDs, thermocouples, frequency, resistance to test sensors

and transmitters• Source/simulate volts, mA, RTDs, thermocouples, frequency, resistance, pressure

to calibrate transmitters• Supports flow meter testing with frequency function• Auto-Step and Auto-Ramp for fast linearity testing• Power transmitters during test using 24V loop power supply with simultaneous mA

measurement• Stores frequently-used test setups for later use• Three-year manufacturer’s warranty• CSA certified, CE compliant• Recommended accessories - C280 Case, TL220 Test Leads, TPAK Meter Hanger

(for 725) C115 Case, TL220 Test Leads, TPAK Meter Hanger (for 726)

Mfg. part nos. FLUKE-712 and FLUKE-714 calibrators include protective yellow holster with test lead storage, testleads and alligator clips (except mfg. part no. FLUKE-714), instruction sheet, single 9V alkaline battery andNIST-traceable calibration report and data. Mfg. part no. FLUKE-724 calibrator includes test clips, test leads, one pair ofstackable test leads and users manuals on CD-ROM.

• Compact and lightweight• Simple controls• Clear, easy-to-read display• Three-year manufacturer’s

warranty• CSA certified

+Measure or source* pressure (*pressure pump required) using any of the FLUKE-700P series pressuremodules; order separately, go online or call Newark.


2216

9


PROCESS METERS & CALIBRATORS


FLUKE-725 AND FLUKE-726 MULTIFUNCTION PROCESSCALIBRATORS (CONT.)

Mfg. part no. FLUKE-744 offers all of thecapabilities of the mfg. part no.FLUKE-743B 120, plus the ability to main-tain and calibrate selected HART transmit-ters without a second tool.


U1401A Handheld Multi-Function Calibrator/Meter 51P3341 751.00U1401A ACCESSORIES

U5481A IR to USB cable 51P3342 30.01U1160A Standard Test Lead Kit 04M7389 60.47U1161A Extended Test Lead Kit 04M7390 42.33U1181A Immersion Temperature Probe 53M4046 59.39U1182A Surface Temperature Probe 53M4047 180.00

Mfg. Part No. DescriptionRange/Resolution

1 year

Maximum Over-

pressure Stock No. Price EachFLUKE 700P00 Differential 1in. H2O/0.001 30 in. H2O 18C0609 1494.00FLUKE-700P01 Differential 10.000 in. H2O/2.491OkPa 30 in. H2O 83F9098 1112.00FLUKE-700P02 Differential 1.0000 psi/6.8948kPa 3 psi 83F9099 1112.00FLUKE-700P22 Differential 1.0000 psi, Wet/6.8948kPa 3 psi 83F9107 1112.00FLUKE-700P03 Differential 5.0000 psi/34.474kPa 15 psi 83F9100 1112.00FLUKE-700P23 Differential 5.0000 psi, Wet/34.474kPa 15 psi 83F9108 1112.00FLUKE-700P04 Differential 15.000 psi/103.42kPa 45 psi 83F9101 1112.00FLUKE-700P24 Differential 15.000 psi/103.42kPa 45 psi 83F9109 1112.00FLUKE-700P05 Gage 30.000 psi/206.84kPa 90 psi 83F9102 1112.00FLUKE-700P06 Gage 100.00 psi/689.48kPa 300 psi 83F9103 1112.00FLUKE 700P27 Gage 300.00 psi/0.001 900 psi 18C0619 1112.00FLUKE-700P07 Gage 500.00 psi/3447.4kPa 1500 psi 83F9104 1112.00FLUKE-700P08 Gage 1000.0 psi/6894.8kPa 3000 psi 83F9105 1112.00FLUKE-700P09 Gage 1500.0 psi/10342kPa 3000 psi 83F9106 1112.00FLUKE-700P29 Gage 3000.00 psi/20.684 MP. 6000 psi 83F9110 1812.00FLUKE-700P30 Gage 5000.0 psi/34.474 mp 10000 psi 83F9111 1812.00FLUKE-700P31 Gage 10000 psi/68.948 mp 15000 psi 83F9112 1812.00FLUKE-700PA3 Absolute 5.0000 psi/34.474kPa 20 psia 83F9113 1282.00FLUKE-700PA4 Gage 15.000 psi/103.42kPa 60 psi 83F9114 1282.00FLUKE-700PA5 Absolute 30.000 psi/206.84kPa 105 psia 83F9115 1282.00FLUKE-700PA6 Absolute 100.00 psi/689.48kPa 315 psia 83F9116 1282.00FLUKE-700PV3 Vacuum -5.0000 psi/-34.474kPa 15 psi 83F9124 1282.00FLUKE-700PV4 Vacuum -15.000 psi/-103.42kPa 45 psi 83F9125 1282.00FLUKE-700PD2 Dual ±1.0000 psi/±6.8948kPa 5 psi 83F9118 1282.00FLUKE-700PD3 Dual ±5.0000 psi/±34.474kPa 15 psi 83F9119 1282.00FLUKE-700PD4 Dual ±15.000 psi/±103.42kPa 45 psi 83F9120 1282.00FLUKE-700PD5 Dual -15/30.000 psi/

-100/208.84kPa90 psi 83F9121 1282.00

FLUKE-700PD6 Dual -15/100.00 psi/-100/689.48kPa

300 psi 83F9122 1282.00

FLUKE-700PD7 Dual -15/200.00 psi/-100/1379.0kPa

600 psi 83F9123 1282.00

(34077)

Mfg. Part No. Description Stock No. Price EachFLUKE-741B 120 Process Calibrator with Simultaneous Source

and Measuring83F9130 3795.00

FLUKE-743B 120 Process Calibrator with 2-Way SerialInterface

83F9131 4795.00

FLUKE-744 Pressure Calibrator with HART Transmitter 48F2061 5795.00CALIBRATION WITH PRINTED CERTIFICATION AND DATA REPORT

FLUKE-741B 120 CALIBRATED Process Calibrator with Simultaneous Sourceand Measuring

60K7395 3975.00

ACCESSORIES

FLUKE-700SW DPC/TRACK Software 83F9126 2099.00FLUKE-700-IV Current Shunt 83F9097 246.00BC7217 120 Battery Charger 48F5502 146.00BE9005 120 Battery Eliminator 83F9093 157.00BP7235 Nickel Metal Hydride Battery Pack 50B9873 199.00C700 Hardshell Carrying Case 83F9094 189.00C781 Compact Softshell Carrying Case 91F6072 47.65C789 Large Softside Fabric Carrying Case 92F7017 101.65

HANDHELD MULTI-FUNCTIONCALIBRATOR/METER

FLUKE-700P SERIESPRESSURE MODULES

(34076)

Mfg. Part No. Description Stock No. Price EachFLUKE-700PTP-1 Hand-Held Pressure Pump 55M0610 578.00

FLUKE-700PMP PRESSURE PUMP700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting: 1/8 FNPT.

700P-PMP Pressure Measuring Pump 31C1618 379.00FLUKE-700HTP-1 HYDRAULIC TEST PUMPMfg Part No. 700HTP-1 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as mfg. part nos.Fluke-700P09, 700P29, 700P30 and 700P31.

FLUKE-700HTP-1 Hydraulic Test Pump 55M0607 925.00(68957)

FLUKE-740 SERIESDOCUMENTING PROCESSCALIBRATORS

FLUKE-700P22

• Conveniently source voltage, current or pulse signals and performDMM measurements at the same time, with the same tool

FLUKE-744

Mfg. part no. U1401A handheld multi-function calibrator/meter incorporates complete DMM performance into aprocess calibration tool, with the unique ability to both source and measure simultaneously. Capable of generatingconstant voltage and current, it also functions as a pulse signal generator, well-suited for calibration of process controldevices such as flow meters. Simultaneously, the U1401A allows users to conveniently utilize its DMM functions as well,such as to measure output mA readings from devices such as transmitters and isolators. Calibration needs that requireboth sourcing and measuring at the same time are met. Its standalone DMM features are just as versatile to be used onthe electronics bench. Capable of measuring both AC and DC signals, it readily tackles everyday DMM tasks such asmeasuring resistance, frequency, temperature and diode checking.

700 SERIES FILTER AND PUMPS



FLUKE-725 US CALIBRATED Multifunction Process Calibrator 60K7385 2230.00(85726)

FLUKE-740 series documenting process calibrators help with troubleshooting problems or running routine mainte-nance. They do many different tasks quickly and well to help get the job done fast. Recommended accessories - C789Case, 700PTP Pneumatic Test Pump, 700PXX Pressure Modules.

Simultaneous source and measure in a singleinstrument:

FLUKE-700PTP-1 PNEUMATIC PRESSURE PUMP

Process calibration tool incorporated with completeDMM features:

Mfg. Part No. 700PTP-1 For use with 700 series pressure modules or test gauges. Can be directly connected to thereference port consolidating two separate pieces when performing pressure calibration and testing. Can also be usedwith 717 pressure calibrators. Ideal for calibrating pressure transmitters, pressure switches and pressure gauges up to600 PSI/40 bar.

Mfg. part no. FLUKE-741B 120 offers simultaneous source and measure capabilities for all common processparameters. Create and execute automated procedures and automatically capture the results. Mfg. part no.FLUKE-743B 120 offers all the capability of mfg. part no. FLUKE-741B 120, plus adds a serial interface for 2-waycommunication with popular PC-based instrumentation management applications. Each FLUKE-740 series processcalibrator includes: mfg. part no. TL224 test leads (2 sets), mfg. part no. AC220 test clips (2 sets), mfg. part no. TP220test probes (1set), battery pack, battery charger, serial port cable (except mfg. part no. FLUKE-741B 120), HARTcommunications cable (mfg. part no. FLUKE-744 only), DPC/TRACK sample with free PC communication utilitysoftware (except mfg. part no. FLUKE-741B 120), instruction manual, and NIST traceable calibration report and data.3-year manufacturer’s warranty.

FLUKE-700PTP-1

• Full-featured DMM capable of measuring AC and DC signals, resistance,frequency, temperature as well as perform diode and continuity checks

• Auto SCAN and RAMP modes to ease automated testing

FLUKE-700HTP-1

Reliability and value:

700-PMP

• Mfg. part no. U1401A comes complete with certificate of calibration,stylish carrying case, protective holster, rechargeable battery pack, ACpower adapter and power cord, calibrator and meter standard test leadkit, yellow test lead for mA simulation, printed Quick Start Guide.

• Data logging software and optional IR-USB cable for PC connectivity• Three-year manufacturer’s warranty



9


PROCESS METERS & CALIBRATORS • TACHOMETERS • MOTOR PHASE/ROTATION TESTERS


HANDHELD MULTI-FUNCTION CALIBRATOR/METER (CONT.)

Range 5∼99,999RPMResolution 0.1RPM <1000RPM, 1RPM ≥1000RPMAccuracy ±(0.05% + 1 digit)Dimensions 27⁄8″W x 71⁄2″L x 11⁄2″HWeight 8.8 oz.

U1401A ACCESSORIES


U1183A Air Temperature Probe 53M4048 69.47U1184A Temperature Probe Adapter 53M4049 10.07U1186A Thermocouple ( K-type) and Adaptor 53M4051 20.04

Mfg. Part No. Description Stock No. Price EachFLUKE-9040 Phase Rotation Indicator 52K4229 249.95


1-472-6633 Digital Photo Tachometer 50N1386 159.90


72-6633 CALIBRATED W/DATA Digital Photo TachometerCalibrated w/Data

50N2290 179.99

Mfg. Part No. 461700 461750Display Counts: 99,999 count LCD 99,999 count LCD Range rpm: 10 to 99,999rpm 10 to 9,999rpm ft/min: — 3 to 6560ft/min m/min: — 1 to 1999.9m/min yd/min: — 1 to 5,000yd/min Basic accuracy: ±(0.1%rdg +2d) ±(0.1%rdg +2d) Max rpm Resolution: 0.001 0.001ft/min Resolution: — 0.0001Dimensions: 4.88x1.97x1.3″ 5.87x1.97x1.3″

(124x50x33mm) (149x50x33mm) Weight: 4oz (114g) 5oz (142g)

(85494)

Mfg. Part Nos. TACH20Speed Dia. 1 m Dia. 6 in Dia. 12 in

0.10 ...1999 m/min 0.10 ...1524 m/min 0.40 ...609.6 m/min0.40 ...6550 ft/min 0.40 ...5000 ft/min 0.40 ...2000 ft/min

4.00 ...78700 in/min 4.00 ...60000 in/min 4.00 ...24000 in/min0.10 ...33.30 m/sec 0.10 ...25.40 m/sec 0.10 ...10.16 m/sec0.10 ...109 ft/sec 0.10 ...83.33 ft/sec 0.10 ...33.30 ft/sec

(142152)

(73438)


Each 9300-HTK Hand Tachometer Kit;

RPM MeasuringRange:6.0 to 99999 RPM;Tach Display:LCD; TachFeatures:Memory; TachType:Contact/Non-Contact

05N0111 181.00

Mfg. Part No. Description Stock No. Price EachTACH20 Tachometer 11P0029 349.95

Mfg. Part No. Description Stock No. Price Each461700 Mini Photo Tachometer 26K9266 139.99461750 Mini Contact Tachometer 26K9267 139.99461937 Spare Reflective Tape (5pks 23″ each roll) 27K9916 39.99

PHASE ROTATIONINDICATOR

(115443)

(91074)

Mfg. part no. FLUKE-9040 phase rotation indicator is a portable, handheld instrument designed to detect and measurethe phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems.Provides clear indication of the three phase via an LCD display and the phase rotation direction (clockwise orcounterclockwise) to determine correct connections. It allows rapid determination of phase sequence and has a voltageand frequency range suitable for commercial and industrial applications. Meets IEC 61010/EN 61010, IEC 61557-7/EN61557-7 electrical safety specifications. Comes complete with three self-retaining test leads, probes, alligator clips andusers manual.

DIGITAL PHOTO TACHOMETER

(135707)

POCKETTACH MINI®TACHOMETERS

MODEL 93 HAND HELDTACHOMETER KIT

• Three phase indication• Indication of phase rotation • Large LCD display • Voltage range: 40 to 700V• Frequency range: 15-400Hz• No battery required — power supplied

by unit under test• Rated CAT III 600V to ground• Two-year manufacturer’s warranty

COMBO TACHOMETER

• Large 5-Digit LCD• 1 Second Response Time at Distances from 2″ to 6″• Stores Last/Min./Max. Readings• Includes 23″ Reflective Tape, Carrying Case and

Owners Manual• Requires (4) 1.5V ″AA″ Batteries (Not Included)

Features:

Accurate non-contact measurements from 5 to 100,000RPM.Simply place a reflective marker on a rotating object, point andmeasure.

• Combination unit - photo andcontact

• Laser sighting operating range upto 40.0″ [1000mm]

• Auto ranging - fixed decimal• Low battery indicator• Carrying case included, Tripod

mounting bushing

FEATURES:

• Hold button freezes display reading• Ergonomically designed and pocket sized housing with protective finger

guard• Easy to operate by simply contacting the rotating object with the sensor

tip and read• (Mfg Part No. 461750) Contact model with surface wheels enable

tachometer to measure linear surface speeds in ft/min, m/min, and yd/min

• (Mfg Part No. 461700) Non-contact integral light beam model withideal measurement range up to 6″ (150 mm) distance

• One year warranty

SPECIFICATIONS

The Redington Model 9300-HTK hand tachometer is simple to use… push the measurement button to record the speed.It also has a Max/Min/Avg recall with 40 points of memory standard. The tachometer can be used for contact ornon-contact measurement on rotating machinery or surface speed. The 9300-HTK can indicate RPM or rotationalspeed, length measurement, meters, yards, or feet per minute. The photoelectric probe is used with reflective tape todetect rotating objects. The accessory adaptor with pointed tip can be added for contact measurement or wheels can beused for surface speed measurement. Optional equipment include: 9V battery, Instruction manual, Certificate ofcalibration, Cone adapter, Funnel adapter, Contact adapter, Master wheel 3.94” [100mm], Reflective tape 0.59” x20.67” [15mm x 525mm].

Complete with 9V battery: Mfg. part no.461700 includes reflective tape and mfg.part no. 461750 includes surface wheels

• Measures rotational and surface speed• Built-in memory• Digital Display• Auto power off function• Easy to select units and mode functions• Contact and non-contact measurement• Agency Approvals & Certifications: CE

SPECIFICATIONS

SPECIFICATIONS:

461750

• Accuracy: ±0.02% v. reading ±1 Digit• Length: 0 ...99999 m / 0...99999 ft / 0...99999 in• Measuring Ranges(rpm): optical: 1 - 99999 min; mech.: 1 - 19999 min• Sensing Distance (optical): max. 600 mm (24 in)• Battery type: 2x AA 1.5V Battery LR6 (ALKALINE) or rechargeable• Operating Temperature: 32 to 122°F• Size: 175x60x28 mm (7x2.5x1 in)SPECS FOR SPEED:


2218

9


MOTOR PHASE/ROTATION TESTERS • GAUSSMETERS


5100 GAUSS METER & PROBES (CONT.)

(148838)

Mfg. Part No. Description Stock No. Price Each6010 Hall-Effect Gaussmeter 83F9146 2896.28

AVAILABLE PROBES

HAD61-2508-05 Axial Probe 93C9428 759.51HAD61-2508-05-T Temperature Compensated Axial Probe 93C9429 906.95HTD61-0608-05 Transverse Probe 93C9430 811.55HTD61-0608-05-T Temperature Compensated Transverse Probe 93C9431 913.32

Minimum Cable SizeMfg. Part No. 1.00 inch 0.50 inch 0.25 inch 0.125 inch

659600 (CHM600) 10-50 feet 10-50 feet 10-39 feet 10-32 feet659600E (CHM600E) 10-75 feet 10-50 feet

Mfg. Part No.Basic DCAccuracy

FrequencyBandwidth Digits Stock No.

Price Break 1Each

5170 2 % DC-20 kHz 3 1/2 60K8441 999.785180 1.1 % DC-30 kHz 3 2/3 89J5968 1344.88

Mfg. Part No. Description Stock No. Price Each302 3-phase presence and motor rotation tester 54M5380 79.00

(41770)


EachSAH17-1904 4″ Probe Length, 0.187″ dia. 89J1899 304.50SAH17-1902 2″ Probe Length, 0.187″ dia. 89J1898 304.50

MODEL 5180 PROBES

HTH17-0604 4″ Probe Length, 0.180″ dia. 85J8888 304.50STD18-0404 4″ Probe Length, 0.158″ dia.(incl. w/5180) 89J4065 304.50STD18-0402 2″ Probe Length, 0.158″ dia. 89J4064 304.50SAD18-1904 4″ Probe Length, 0.187″ dia. 89J1855 304.50SAD18-1902 2″ Probe Length, 0.187″ dia. 89J1854 304.50

MODEL 5170/5180 GAUSSMETER PROBES

STB1X-0201 1″ Probe Length, 0.050″ dia. 89J4053 421.23MOS51-3204 4″ Probe Length, 0.285″ dia. 85J8922 779.07

Mfg. Part No.Basic

AccuracyAnalogOutput Stock No.

Price EachEach

4180 +/-(2% + 1 digit) None 96M1812 282.324190 +/-(1% + 1 digit) 8K samples/sec 38M8608 517.96


EachHTD18-0604 4″ Probe Length, 0.180″ dia. 85J8874 304.50STH17-0404 4″ Probe Length, 0.158″ dia. (incl. w/5170) 89J4103 304.50STH17-0402 2″ Probe Length, 0.158″ dia. 89J4102 304.50

Mfg. Part No. Description Stock No. Price Each659600 (CHM600) Cable Height Meter, 50 Feet Max 60K8346 840.00659600E (CHM600E) Cable Height Meter, 75 Feet Max 70K7561 960.00

(101647)

(135713)

(89378)

(135712)

PHASE AND MOTORROTATION METER

6000 SERIES HALL-EFFECT GAUSSMETER

Mfg. part no. 302 is a 3-phase presence and rotation meter combined with a 3-phase motor rotation tester. Can beused on a powered system (supply side) or on an unpowered motor (load side). Fused. Includes color-coded test leads,soft case.

CABLE HEIGHT METERS

5100 GAUSS METER & PROBES

Mfg. Part No. Description Stock No. Price EachPRM-4 Phase Sequence and Motor Rotation Tester 78M6840 109.95

Mfg. part no. 6010 Hall-effect gaussmeter represents the latest innovations and state-of-the-art design. ExclusiveDynamic Probe Correction feature, along with temperature compensation, allows measurements up to 300kG with abasic accuracy of 0.25%. Key features include: peak hold, max./min. hold, auto zero, auto range, relative mode, andtemperature measurement. Mfg. part no. 6010 also features a corrected analog output (± 3V Full Scale for each range),an RS-232 communications port, a rechargeable battery and probe temperature compensation which allows the user totake temperature readings (–40°C to +85°C) while monitoring the magnetic field. The easy-to-read large formatalpha-numeric LCD with dual 33⁄4-digit read out gives the user magnetic field flux density reading while also displayingtemperature (or peak hold, or max./min. hold). User prompts on the custom formatted LCD allow fast, simple pushbutton operation. All models come equipped with a zero gauss chamber, accessory hard case, built-in rechargeablebattery, quick reference card and instruction manual.

4100 GAUSS METER

• Shortens measuring time• Inherently safe — 3 button operation• Easy to use and compact• Calibration and maintenance free

operation• Non-contact measurement• Measures the height of up to six

overhead cables

• Large Format LCD• Dual 33⁄4-Digit Readouts• Temperature Measurement• Displays in Gauss, Tesla or Ampere/Meters• Peak Hold• Max./Min. Hold• Corrected Analog Output• Auto Range• Temperature Compensated Probes• Auto Zero/Auto Calibration• RS-232 Interface• Rechargeable Battery• Compatable with Type 9200 Probes• CE Compliant

(147132)

• Indicates phase presence• Indicates phase rotation• Indicates motor rotation/wiring• Indicates battery status• Phase and motor rotation

indicator works as low as 1VAC• Phase presence indication from

as low as 100VAC

• Auto Zero, Min/Max./Peak Hold• Auto Range and Relative Mode• Gauss, Tesla or Ampere/Meter readings• 5180 features a corrected analog output (+/- 3V FS) and a USB communication port

• Gauss or Tesla Display Units• Waveform and RMS Analog Output (4190)• Selectable X, Y, or Z Axis plus Vector

Summation• Min/Max Hold• True RMS Reading and Relative Mode• Measuring Range: 0.1mG to 199.9 .uT• Resolution: 0.1 mG / 0.01 uT• Frequency Respone +/-5%: 30 to 2kHz

Features:

CHM series cable height meters use ultrasonic techniques to determine the height of overhead power cables up to 75feet. Results may be displayed in either meters or feet and inches. The meters measure the lowest cable’s height and thespacing between the next five cables. A battery and instruction manual are included.

This new design incorporates the use of digital signal processing technology making it the world’s first hand-heldgaussmeter to have a digital signal processor (DSP) on board. F.W. Bell’s exclusive Dynamic Probe Correction allowsmeasurements from 0 to 30 kG with a basic accuracy of 1%. Built-in software eliminates the need for complexcalibration procedures. User prompts on the custom formatted LCD allow fast, simple push button operation. All modelscome equipped with a detachable transverse probe, zero gauss chamber, instruction manual, hard carrying case, andfour AA batteries. Axial, ultra thin transverse and low-field probes are available as options.

Lightweightand completely self contained, the easy to use 4100 Series ELF Meters are ideal for commercial or homeuse. The 4100 Series accurately measures Extremely Low Frequency Magnetic Fields generated by electricalequipment. Applications include detecting magnetic field emissons from a wide variety of sources, including videodisplay terminals, AC power lines office equipment, household appliances, and all types of electronic equipment. The4100 Series Hand-HeldGaussmeter’s built-insoftware eliminates the need for complex calibration procedures. Userprompts on the custom formatted LCD allow fast, simple push button operation. All models come with instructionmanual, soft carrying case, and four AAA batteries.

PHASE SEQUENCE ANDMOTOR ROTATION TESTER

Mfg. part no. PRM-4 phase sequence and motorrotation tester comes complete with test leads (red,green, and blue) with alligator clips mfg. part no.TL-PRM-4, 9 V battery, soft vinyl case and users manual.

MODEL 5170 PROBES

• Identifies 3-phase sequence and open phasecheck

• Motor shaft rotation indication protected byCAT III circuitry

• CAT III 600V rated for both testing segments• Meets EN61010 safety requirements, CSA,

EN61557-7

Features:



9


HANDHELD CAPACITANCE/LCR METERS (CONT.)


INSPECTION • COMPONENT TESTERS


1-2875B LCR Meter 46F8205 222.88


1-2878A Dual Display LCR Meter with Autoranging 07J0231 276.39879 Deluxe Dual Backlit Display LCR Meter with Autoranging 96H7063 299.00

(5293)

(5294)

Mfg. Part No. U1701A U1731A U1732ATest Signals DC 120Hz, 1kHz 100/120Hz, 1k/10kHzFunctions C L,C,R,Q,D L,C,R,Q,D,θPrimary Counts 11,000 20,000 20,000Inductance - Up to 999.9H Up to 999.9HCapacitance Up to 199.99mF Up to 19.99mF Up to19.99mFResistance - Up to 9.999MΩ Up to 9.999MΩ

878A AND 879 DUAL DISPLAY LCRMETERS WITH AUTORANGING

875B 31⁄2 -DIGIT LCD LCR METER


U1701A Handheld Capacitance Meter 51P3610 150.00U1731A Handheld LCR Meter 51P3612 276.00U1732A Handheld LCR Meter 51P3614 331.00

Mfg. Part No. Description Stock No. Price EachMC108 Digital Mini Microscope 71P2407 299.99

Mfg. Part Nos. FLUKE 411D FLUKE 416DRange (for extendeddistances, use a target plate)

0.1 m to 30 m(0.33 ft to 100 ft)

0.05 m to 60 m(0.16 ft to 200 ft)

Measuring accuracy ± 3 mm (0.118 in) ± 1.5 mm (± 0.059 in)Units displayed 00.000 m, 000 ft 00in 1⁄8, 000.00 ft 00.000 m, 000 ft 00in 1⁄16, 000.00

ftLaser Class II IILaser type 635 nm, < 1 mW 635 nm, < 1 mWAutomatic power off after 180 seconds after 180 secondsContinuous measurement • •Addition/subtraction • •Battery life up to 3,000 measurements up to 5,000 measurementsLCD illumination - •Data locations - 10Min/Max - •Audible feedback - •Pythagoras (Indirectmeasurement)

Simple Full

Ingress protection IP40 IP54Dimensions 123 mm x 50 mm x 26 mm

(4.84 in x 1.97 in x 1.02 in)135 mm x 46 mm x 31 mm(5.31 in x 1.81 in x 1.22 in)

Weight 150 g (5.29 oz) 110 g (3.88 oz)Temperature Storage range -25 °C to 70 °C (-13 °F to 158 °F) -25 °C to 70 °C (-13 °F to 158 °F)Temperature Operation range 0 °C to 40 °C (32 °F to 104 °F) 0 °C to 40 °C (32 °F to 104 °F)Operating altitude (ISO 9022) up to 3500 m up to 3500 mStorage humidity (at 35 °C) maximum 85% for 24 h maximum 85% for 24 hBatteries AAA (2) AAA (2)

ACCESSORIES


U1701A-SMD Soft Carrying Case and SMD Tweezer Bundle 51P3611 30.11U1732A-SMD Soft Carrying Case and SMD Tweezer Bundle 51P1540 306.11U1174A Soft Carrying Case 78M8406 20.04U5481A IR to USB cable 51P3342 30.01U1782A SMD Tweezer 51P3616 30.01U1780A Power Adapter and Cord 51P3615 150.00

Mfg. Part No. Description Stock No. Price EachFLUKE-411D Laser Distance Meter, 100 ft. 06P9669 109.00FLUKE-416D Laser Distance Meter, 200 ft. 06P9670 229.00

• 8 Capacitance Ranges: 1000pF to 10mF• 7 Resistance Ranges: 10Ω to 10MΩ• 8 Inductance Ranges: 1mH to 10,000H

• 8 Capacitance Ranges: 200pF to 20mF• 7 Resistance Ranges: 2Ω to 20MΩ• 7 Inductance Ranges: 200µH to 200H

(142151)

(148527)

DIGITAL MINI MICROSCOPE

Mfg. part nos. 878A and 879 LCR meters also measure capacitordissipation factor and inductor Q factor. Simultaneously displays thesevalues and remembers minimum and maximum. Keeps running aver-age of tested component values. Relative mode displays differencebetween measured and reference values. Tolerance mode beeps toindicate component outside 1%, 5%, 10%, (20% mfg. part no. 879only) reference value. Mfg. part no. 878A has two test frequencies(120Hz, 1KHz); mfg. part no. 879 has four test frequencies (100Hz,120Hz, 1KHz, 10KHz). 41⁄2-digit LCD displays values to 19,999, and thesecondary 3-digit 1,000 count display reads D or Q. Mfg. part no. 879has backlit display for poorly lit areas. Both models can be used in eitherauto or manual ranging modes. Includes pair of test alligator clips, DC9V battery and user manual.

Rotary switch allows easy function/range selection. Measure dis-sipation factor of capacitors and 1/Q of inductors. Low battery andoverload indicator. Overload: fuse protected 250VAC, 100mA. Mea-surement rate: 2.5 per second, nominal. Includes test clips, 9V battery,spare fuse, instructions.

(133292)

HANDHELDCAPACITANCE/LCRMETERS

FLUKE LASERDISTANCE METERS

Mfg. part no. MC108 dual window view simultaneously displays the magnified image next to the original image.Includes microscope stand, three AAA Ni-MH rechargeable batteries, adaptor/charger, Windows® compatible PCsoftware with mini USB cable, cleaning cloth, and wrist strap. Dimensions: 4.7 x 2.2 x 0.8″ (120 x 56 x 20mm). Wt. 2.5oz. without batteries. CE compliant.

Mfg. part nos. U1731A/32A feature dissipation factor and quality factor, one-touch access to capacitance, inductanceand resistance measurements, 20,000 counts resolution and 2 to 4 selectable test frequencies. Additionally, mfg. partno. U1732A provides auto calculation of phase angle and back light. Mfg. part no. U1701A features 11,000 countsresolution. PC data logging is optional to all units via IR-to-USB cable. Each unit comes complete with certificate ofcalibration, alligator clip leads, 9V alkaline battery, data logging software, quick start user’s and service guides.Three-year manufacturer’s warranty.

• Reduction of estimation errors, saving both time and money• Instant measurement with one-button operation• Easy targeting with bright laser• Quick calculation area (square footage) and volume• Pythagoras calculation for determining distance indirectly

from two other measurements• Two-year warranty

Features:

• 1.8″ TFT color LCD screen with 2MB memory• 7x to 108x magnification range

Optical Zoom: 7x to 27xDigital Zoom: 4x

• Four white LEDs with adjustable brightness for objectillumination

• 5 Image Effect modes: normal, gray, inverse, emboss,and dual window view

• Dual Window View simultaneously displays themagnified image next to the original image

• One year warranty

• Min/Max/Average values recordings• Visible and audible tolerance mode for component

sorting• Guard terminal for better noise immunity (to be used

with SMD tweezer)• Dual display with backlight (U1701A/32A)• Data Hold function to freeze readings• Relative Mode

FEATURES:

SPECIFICATIONS

The compact and handy Fluke laser distance meters were designedfor indoor and limited outdoor applications. Both models are simpleto operate, with the Fluke durability and quality you expect. And, withshortcut keys for addition, subtraction, area and volume, mea-surements could not be simpler.

FLUKE 411D FLUKE 416DSPECIFICATIONS:


2220

9


COMPONENT TESTERS • CABLE & CONTINUITY TESTERS (COPPER)


MICROSCANNER2 CABLE VERIFIER (CONT.)BATTERY CAPACITY ANALYZERS

Mfg. Part No. Description Stock No. Price EachMT-8200-50A IntelliTone Pro 100 Kit with Toner and Probe 92H6882 146.00MT-8200-60A IntelliTone Pro 200 Kit with Toner and Probe 92H6885 198.00

ACCESSORIES

MT-8202-05 IntelliTone Pro Carrying Case 92H6889 20.00MT-8203-20 IntelliTone Pro Test Leads with Bed of Nails 92H6894 19.00MT-8203-22 IntelliTone Pro Test Leads with Alligator Clips 92H6895 11.00

TDR500 655510F (TDR1000/2)Ranges (feet) 100, 300, 1000, 3000, 10,000 30, 100, 300, 1000, 3000, 10000Accuracy + 1% range + 1 pixel + 1% range + 1 pixelResolution 1% 1%Output Pulse 5V peak to peak 5V peak to peakGain Automatic 4 selectable steps per rangeVelocity Factor 0.30 to 0.99, 0.01 per step 0.20 to 0.99, 0.01 per stepDe-Energized Cable Yes YesEnergized Cable YesInput Protection IEC61010-1, 300V CAT3TX Null 0 to 120 OhmsRefresh Rate 1 to 3 times per second, selectableWarble Tone 5V peak to peakDisplay 122 x 32 pixel graphic LCD 128 x 64 pixel graphic LCDConnectors BNC Two 4mm safety terminalsTest Leads (two) 300mm long with crocodile clips 2-meters long, shrouded connectors to miniature

crocodile clips

(79293)


1-41577 PC Cable-Check™ Pro 63K9834 207.59

Mfg. Part No. Description Stock No. Price EachMS2-100 Microscanner2 Cable Verifier 47M2208 449.00MS2-KIT Microscanner2 Cable Verifier Kit 47M2205 749.00

ACCESSORIES

MS2-IDK27 MicroScanner2 Remote Identifier Kit 2-7 47M2204 249.00MS2-CPK MicroScanner2 Professional Kit Carrying Case 47M2203 79.00

600

INTELLITONE™ PRO KITS WITHTONER AND PROBE

(100939)

• InteliTone digital processing eliminates noise and false signals• New SmartTone™ analog toning precisely isolates individual

wire pairs• Locates cables safely and effectively on active networks• Verifies twisted-pair installation with visual end-to-end

continuity test• Identifies, diagnoses, and troubleshoots datacom/telecom

services

Mfg. Part No. Description Stock No. Price Each1594 LAN and A/V Cable-Check™ 63M4214 44.99

CABLE FAULT LOCATORS

MicroScanner2 displays all key test results -- wiremap, pair lengths, distance to fault, cable ID and far-end devices -- onone screen. Both the main unit and the far-end identifiers can be used to test telephone jacks, Ethernet jacks, and CATVoutlets right out of the box. Built-in Intellitone digital and analog toning to precisely locate virtually any wire pair. Mfg.part no. MS2-KIT Microscanner2 kit includes: Cable Verifier, remote identifiers #2-7, Intellitone Pro 200 probe, shieldedtwisted pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to8 alligator clip bare wire adapter, F coax push-on patchcord, accessory soft pouch, batteries and operator guides, all packaged in a deluxe carry case.

INTELLITONE™ Pro 200 also features:

601

(7559)

• Simple operation• Tough ABS case• IP 54 protection• 3-year manufacturers warranty

• Length meter shows distance to termination,open or short

• PoE detection rules out insufficient power• Detail mode gives additional test status

information• Intuitive icons show what’s at the end of any

cable• Modular port accepts RJ45 and RJ11 plugs• Coax connector for video and audio testing

• Identifies and diagnoses 10/100/1Gb Ethernet link connectivity withNIC/Hub indication

• Identifies and diagnoses POTS with Line 2 service and polarity• Validates twisted pair installation with Cablemap capability, which

identifies common cable miswires

CABLE-CHECK™ TESTERS

TDR cable fault locators find faults in metallic electrical cables, includingtwisted pair, coaxial, and parallel cables. TDR500, for use on de-energizedcable only, has a warble tone for tracing with any tone tracing probe.655510F (TDR1000/2), suitable for both energized and de-energizedcables, has a display that is twice the size, TX null feature for finding nearend faults, and a fast find feature to locate faults in seconds. Six AAbatteries, test leads, and instruction manual are included.

MICROSCANNER2 CABLE VERIFIER

602

IntelliTone™ Pro’s breakthrough digital and analog toning finds cables other toners/probes can’t. Mfg. part no.MT-8200-50A IntelliTone Pro 100 toner and probe kit includes: toner and probe, coax F connector adapter, RJ-11 andRJ-45 patch cable, test leads with alligator clips, lanyards, owner’s CD, quick-start guide and two 9V batteries. Mfg.part no. MT-8200-60A IntelliTone Pro 200 toner and probe kit includes: toner and probe, coax F connector adapter, twoRJ-11 and two RJ-45 patch cable, test leads with alligator clips, lanyards, owner’s CD, quick-start guide and two 9Vbatteries.

1577

SPECIFICATIONS

MS2-KIT

These battery capacity analyzers are ideal for testing lead acid batteries used in UPS devices, emergency lighting,sprinkler systems, communications equipment and alarm systems. All testers display stored charge capacity along withloaded and unloaded voltage. Mfg. part nos. 601 and 602 also display batteries internal resistance.

PC CABLE-CHECK™ PRO

MS2-100

• Auto and manual scanning modes• True cable mapping• Easy-to-read LED Indicators• Power shut-off conserves battery• Rugged case with built-in handle• Non-slip rubber feet grip desk or bench• Cable length: 1000′ max. (600′ 75Ω coax)• Output signal: 8V DC @ 10mA

SPECIFICATIONS 600 601 602Battery Test Voltages 12 6, 12 24, 36, 42Selectable Amp-Hours 7, 12, 24, 42, 65, 100 1-100 Amp-Hrs. in 1 Amp-Hr. StepsDimensions 6.3(H) x 3.14(W) x 1.6″(D) 9.5(H) x 3.14(W) x 1.6″(D)

Mfg. part no. 1577 PC Cable-Check™ Pro cable tester is designed to test popular PC cable by identifying the wireconnection status: open, short, or cross, in LAN, telephone, Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2keyboard and parallel printer cable. It is a simple and easy-to-use troubleshooting tool ideal for cable assembly testingand quick diagnostic checking of cable with the following terminations: RJ45, RJ11 and RJ12 UTP/STP modular plugs,BNC and CATV ″F″ coaxial, 9-, 15- and 25-pin D-sub, 15-pin HD-sub, A, B, and mini 5-pin USB, 4- and 6-pin 1394FireWire and 36-pin Centronics printer. Requires 9V battery (included). Size: 11″H x 6.56″W x 1.60″D. One-yearmanufacturer’s warranty.


1-4600 12V Lead-Acid Battery Capacity Analyzer 29C9349 376.14601 6V and 12V Lead-Acid Battery Capacity Analyzer 84H9306 465.09602 24V, 32V, and 42V Lead-Acid Battery Capacity Analyzer 84H9307 471.75

Mfg. part no. 1594 LAN and A/V Cable-Check™ tester is designed for quick and easy testing of RJ45, UTP or STPmodular plugs, CATV ″F″ coaxial, RCA, and BNC cabling used in smart home installations. Tests RJ45 patch cords andnetwork installations to identify good connections, opens, shorts or cross-connections. Identifies data and telephoneconnection schemes and maps cable pin-out. Tests continuity of network and coaxial cable (Cat5, Cat5e, Cat6, RG6,RG6 Quad, RG59) and installed cable runs. Includes main and remote units, two RJ45 patch cords, 75-ohm maleterminator, CATV ″F″ female adapter, two CATV ″F″(male)-to-BNC (female) adapter, two CATV ″F″(male)-to-RCA(female) adapter, 9V battery and durable nylon carrying case. Battery life for 15 hours continuous use. One-yearmanufacturer’s warranty.

(68948)

1594LAN and A/V CABLE-CHECK™ • Continuity tester for network and coax cable• Quickly check cable installations and patch

cords • Automatic scanning • User selectable slow or fast speeds• Easy-to-use with clear LED read-outs• Cable length: 1650′ max.• Output signal: 9V DC @ 10mA max.



9


CABLE & CONTINUITY TESTERS (COPPER) • CABLE TESTERS (FIBER)


CABLE FAULT LOCATORS (CONT.)

PC CABLE TESTER

(148843)


1-972-6068 Combo Kit 66F6719 105.07

ACCESSORIES

72-6065 Tone Generator 66F6716 32.0272-6066 Inductive Amplifier 66F6717 59.7572-6067 Carrying Case 66F6718 15.94

Mfg. Part No. Description Stock No. Price EachDTX-1800 CableAnalyzer; Test to 900MHz, Certifies Cat. 6 Links

in 12 Seconds07J2396 8595.00

Mfg. part no. DTX-1200 CableAnalyzer™ includes DTX-1200 main unit and smart remote, LinkWare PC software, Cat6/Class E permanent link adapters (2) Cat 6/Class E channel adapters (2), headsets for talk (2), AC chargers (2), carryingcase, USB interface cable (mini-B), and a user manual.

Mfg. Part No. Description Stock No. Price EachDTX-1200 CableAnalyzer; Tests to 350MHz, Certifies Cat. 6 in 12

Seconds07J2395 8268.00

DTX-1200-M Copper and Multimode Fiber Certification Kit 23J8041 11475.00DTX-1200-MS Copper and Multimode/Singlemode Fiber Certification

Kit20J7037 15655.00

DTX SERIES FIBER MODULE SETSDTX series fiber modules add record-fast fiber certification and fault location to the DTX series CableAnalyzers™;ordered separately above.. Quickly certify multimode and singlemode fiber attenuation, length, and polarity.

Mfg. Part No. Description Stock No. Price EachDTX-MFM2 Set of 2 DTX multimode Fiber Modules--850nm and

1300nm LED Sources84K0583 4655.00

DTX-SFM2 Set of 2 DTX Gigabit Multimode FiberModules--850nm VCSEL and 1310nm Laser Sources

18M6085 6490.00

DTX-GFM2 Set of 2 DTX Singlemode Fiber Modules--1310nmand 1550nm Laser Sources

18M6084 5310.00

DTX SERIES NETWORK SERVICE MODULEMfg. part no. DTX-NSM network service module certifies cabling, verifies network service availability and linkconnectivity, and documents findings in one LinkWare report. Documentation provides clear evidence that the job wasdone right. Module plugs into the back of the DTX series CableAnalyzer main unit; order separately above.

Mfg. Part No. Description Stock No. Price EachDTX-NSM Network Service Module 76K2751 1090.00

DTX SERIES OTDR MODULESOptical Time Domain Reflectometer (OTDR) module snaps onto the Fluke Networks DTX CableAnalyzer and makes theDTX powerful certification tool a complete, easy-to-use OTDR that shoots and analyzes traces on singlemode andmultimode fiber. Plugs into the back of the DTX series CableAnalyzer main unit.

Mfg. Part No. Description Stock No. Price EachDTX-OTDR-KIT Includes DTX Compact OTDR Module, launch fibers,

accessories and carrying case 50M3537 11955.00

DTX-OTDR-QMOD DTX Compact OTDR Module. Includes 850/1300/1310/1550 OTDR Module and carrying case

50M3538 10395.00

DTX-QUAD-OTDR 120 Includes DTX-1800 CableAnalyzer and DTX CompactOTDR Module

50M3542 13515.00

DTX SERIES ACCESSORIESMfg. part no. DTX-10GKIT enables testing and certification of twisted pair cabling for 10 Gigabit Ethernet deployments– whether it is an existing Cat 6 or newly installed Augmented Cat 6 cabling system. Includes two mfg. part no.DTX-AXTLK1 communication modules, AxTalk Analyzer™ software, mfg. part nos. DTX-PLA002S and DTX-CHA01AS, and a total of 8 terminators (2 sets of mfg. part no. DTX-AXTERM).

Mfg. Part No. Description Stock No. Price EachDTX-10GKIT DTX-1800 Alien Crosstalk Analyzer Kit 18M6086 2865.00DTX-AXTERM Alien Crosstalk Link Terminators - Set of Four 33M7448 270.00DTX-CHA001AS Cat6/Class E Channel Adapter (AXTalk) - Set of Two 31M9537 255.00DTX-PLA002S Cat6A/Class EA Permanent Link Adapter - Set of Two 46M2473 835.00DTX-COAX DTX Series Coax Cable Adapter Kit 73J6920 625.00DTX-CH003 DTX Series Coax Cable Replacement Adapter 73J6919 325.00DTX-FTK DTX Series Multimode Fiber Test Kit 73J6921 1249.00DTX-PCU6S DTX Series UTP Cat 6 Patch Cord Adapter Kit 73J6923 735.00DTX-PCU6S/MN DTX-PCU6S/MN UTP Cat 6 Patch Cord Main Adapter 73J6924 350.00DTX-PCU6S/SR DTX-PCU6/SR UTP Cat 6 Patch Cord Smart Remote

Adapter73J6925 350.00

DTX-TERA TERA Adapter Kit 73J6927 1130.00DTX-CHA011 TERA Channel Adapter 73J6918 170.00DTX-PLA011 TERA Permanent Link Adapter 73J6926 425.00

(5390)

• Test For Open, Shorted and MiswiredCables, Continuity, and PinConfiguration

• Auto and Manual Scanning• Adjustable Scan Speed• Easy-to-Read Multi-LED Display

Mfg. Part No. Description Stock No. Price Each72-6706 Multi-Network/Modular Cable Tester 18C2275 89.95

(79290)

Mfg. Part No. Description Stock No. Price EachTDR500 Cable Fault Locator 63K9719 655.00655510F (TDR1000/2) Cable Fault Locator 43K9843 1610.00

(65110)

TONE TEST KIT

Mfg. part no. 72-6068 is designed to help identify the termination point of wires or to trace their paths. Built ofhigh-impact plastic. Kit contains tone generator (Mfg. part no. 72-6065), inductive amplifier (Mfg. part no. 72-6066)and carrying case (Mfg. part no. 72-6067). The tone generator includes polarity, continuity and 1kHz warble or solidtone emission. A hanging strap minimizes strain on leads supporting the unit. The inductive amplifier offers featuressuch as wrist wrap, low battery light and buttset connections with weather cover. It is crushproof up to 4000 lbs.One-year limited warranty. Tone generator, inductive amplifier, and carrying case can also be ordered separately below.

(89379)

MULTI-NETWORK ANDMODULAR CABLE TESTER

DTX SERIES CableAnalyzer™AND ACCESSORIES

Mfg. part no. 72-6707 cable tester is a stand-alone unit. It is designed to test popular PC data cables, monitor, printer,modem, mouse extension, BNC coax, RJ-45, 1394, and USB cables by identifying the wire connection status: open,short, cross, miswire, and continuity of wires and pin configuration. It is a simple and easy-to-use trouble shooting toolideal for cable assembly testing or by system integrator to quickly check the pin configurations. Requires 9V battery (notincluded).

• Easy Verification of CableContinuity, Open, Short andMiswiring

• Remote Terminator Tests InstalledCables up to 1000′ Away

• Grounding Test• Auto or Manual Scanning of Pin-

Outs


1-472-6707 PC Cable Tester 18C2273 139.13

DTX-1800

(65112)

• Exceeds Cat 5e/6/7 requirements• Fast 9-second Cat 6 Autotest• Fast diagnostics pinpoint faults and suggest fixes• 900MHz capability for 10 Gig Ethernet, Class F, CATV• Resident fiber modules allow one-button switching from

copper to fiber• Fast, reliable, and rugged• Color display• 12-hour batttery life• Reduces certification costs by as much as 33% a year• All models are upgradable to the top model

Mfg. part no. 72-6706 multi-network and modular cable tester easily reads the correct pin configuration of 10Base-Tcable (category 5), 10Base-2 cable (coax), RJ-45/RJ-11 modular cables, 356A, TIA-568A/568B and Token Ring cableby comparing transmitting end to the corresponding receiving end. Includes: 2 BNC adapter cables, BNC male/maleadapter, RJ-45 modular cable, carrying case and owners manual, requires 9V battery (not included).

DTX series CableAnalyzers™ significantly reduces total time to certify byimproving every aspect of testing. Three times faster and more accuratethan other testers.

DTX SERIES MAINFRAMES AND PACKAGESMfg. part no. DTX-1800 CableAnalyzer™ includes DTX-1800 main unit and smart remote, LinkWare PC software,16MB MMC card, Cat 6/Class E permanent link adapters (2), Cat 6/Class E channel adapters (2), Headsets for talk (2), ACchargers (2), carrying case, USB interface cable (mini-B), serial RS-232 cable (DB9 to IEEE 1394), and a user manual.


2222

9


CABLE TESTERS (FIBER)


SIMPLIFIBER PRO OPTICAL POWER METER AND FIBER TEST KITS (CONT.)

Mfg. Part No. Description Stock No. Price EachVISIFAULT Visual Fault Locator 56J8969 300.00NF380 1.25 VisiFault Adapter 56J8967 92.00

Mfg. Part No. Description Stock No. Price EachCIQ-VOIP CableIQ VoIP Enterprise Service Kit 13P0343 3995.00

(83018)

Mfg. Part No. FTK-1000 FTK-2000 FTK-1300 FTK-1350 FTK-1450SimpliFiber Pro®

SimpliFiber Pro®

850/1300 Multimode Source

SimpliFiber Pro®

1310/1500 Singlemode Source

VisiFault™ Visual Fault Locator

FT120 Fiber ViewerOptical Microscope

FT500 FiberInspector Mini

FindFiber Remote ID Sources

NFC-Kit-Box fiber optic cleaning kit

Carrying Casefor protection and easy transport

(143698)

Mfg. Part No. Description Stock No. Price EachSFPOWERMETER SimpliFiber Pro Power Meter w/ SC Adapter,

Carrying Pouch45P8143 925.00

SFSINGLEMODESOURCE SimpliFiber Pro SingleMode Source 1310/1500 w/SC Port, Carrying Pouch

45P8144 1695.00

Mfg. Part No. Description Stock No. Price EachFTK1000 Basic Verification Kit (Multimode) 45P6662 1995.00FTK2000 Basic Verification Kit (Singlemode) 45P6666 2795.00FTK1300 Full-Featured Verification Kit with FiberViewer 45P6663 2965.00FTK1350 Full-Featured Verification Kit with FiberInspector Mini 45P6664 4118.00FTK1450 Complete Fiber Verification Kit 45P6665 6045.00FINDFIBER FindFiber Remote ID source w/ SC Port, Carrying Pouch 45P6657 150.00FINDFIBER-6 Set of Six (6) FindFiber Remote ID Sources, Carrying

Pouch45P6658 900.00

ACCESSORIES

NFK1-SMPLX-LC 62.5 uM Simplex Test Reference Cord Set (SC/LC, LC/LC), 1m; Mandrel

45P7931 100.00

NFK1-SMPLX-SC 62.5 uM Simplex Test Reference Cord Set (SC/SC), 1m;mandrel

45P7932 100.00

NFK1-SMPLX-ST 62.5 uM Simplex Test Reference Cord Set (SC/ST, ST/ST), 1m; Mandrel

45P7933 100.00

NFK2-SMPLX-LC 50 uM Simplex Test Reference Cord Set (SC/LC, LC/LC),1m; Mandrel

45P7934 100.00

NFK2-SMPLX-SC 50 uM siSimplex Test Reference Cord Set (SC/SC), 1m;Mandrel

45P7935 100.00

NFK2-SMPLX-ST 50 uM Simplex Test Reference Cord Set (SC/ST, ST/ST),1m; Mandrel

45P7936 100.00

NFK3-SMPLX-LC Singlemode Simplex Test Reference Cord Set (SC/LC,LC/LC), 1m

45P7937 100.00

NFK3-SMPLX-SC Singlemode Simplex Test Reference Cord Set (SC/SC),1m

45P7938 100.00

NFK3-SMPLX-ST Singlemode Simplex Test Reference Cord Set (SC/ST,ST/ST), 1m

45P7939 100.00

NFA-SC-SINGLE SC Interchangeable Connector Adapter (1) 45P7929 98.00NFA-LC-SINGLE ST Interchangeable Connector Adapter (1) 45P7928 98.00NFA-ST-SINGLE LC Interchangeable Connector Adapter (1) 45P7930 98.00NF-MANDREL-625 Multimode Fiber Mandrel for 62.5/125 µm Fiber with 3

mm Jacket (Gray)53H7347 10.00

NF-MANDREL-50 Multimode Fiber Mandrel for 50/125 µm Fiber with 3mm Jacket (Red)

53H7346 10.00

SUPPORT

GLD-FTK Gold Support Package for SimpliFiber Pro 70M9806 445.00

VISIFAULT™ VISUALFAULT LOCATOR

CableIQ™ VoIPENTERPRISESERVICE KIT

(142261)

• Accelerates end-to-end fiber continuitychecks

• Speeds fiber tracing and identification • Simplifies fiber polarity verification • Aids in location of fiber faults including

tight bends, breaks and bad connectors • Features continuous and flashing modes • Connects to 2.5mm standard and

1.25mm SFF connectors • Over 80 hours of battery life with two AA

batteries

SIMPLIFIBER PROOPTICAL POWER METERAND FIBER TEST KITS

VisiFault™ Visual Fault Locator (VFL) traces optical fibers, verifies continuity and fiber polarity, and helps find breaks incables, connectors and splices. The bright red laser light is easily visible from a distance. Continuous and flashing outputmodes makes identification easier. Ruggedly constructed with an energy-absorbing, impact-resistant case to ensureyears of trouble-free use. A handy lanyard attachment and a carrying case make it easy to attach the VisiFault™ to yourbelt where it is readily available.

• Includes the CableIQ Advanced IT Kit and NetTool VoIP Enterprise Service Kit• Use the CableIQ Qualification tester to check existing cabling to see if it can support VoIP bandwidth • Do a VoIP Performance Check using the NetTool Series II inline network tester, or quickly troubleshoot if

issues arise once you are up and running. • Locate and trace network cables with the included IntelliTone™ Probe• Save cable and network test reports to PC with included reporting software

Mfg. part no. CIQ-VOIP CableIQ VoIP Enterprise Service Kit is the all-in-one solution for IT desktop professionals whoneed to deploy VoIP. The Cable IQ VoIP Enterprise Service Kit bundles two great tools together to support your VoIPdeployment. CableIQ Advanced IT Kit includes: CableIQ main unit with remote adapter, CableIQ reporter software CD,IntelliTone 200 digital probe, remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB cable, coax ″F″ push-on adapter, 75-ohmcoax patch cord, RJ45/11 universal coupler, RJ11-RJ11 patch cord, owners CD and quick start guide, (4) AA batteries,test accessory soft pouch, and hard carry case. NetTool Series II Pro VoIP network tester includes: 10/100/1000Mbps inline, VoIP option, NetProve diagnostics, IntelliTone toning, NetTool Connect PC software, wireviewwiremapper #1, (4) AA alkaline batteries, USB to mini-USB cable, ethernet cable, getting started guide, CD with multilanguage user manuals, and soft carrying case.

• Dual-wavelength testing – complete testingin half the time

• Additional wavelengths to include 1490 and1625 – calibrated to extend from typicalenterprise wavelengths for broaderapplications

• Min/Max – automated precision tracking ofintermittent power fluctuations

• FindFiber – quick end-to-end cable routingidentification

• CheckActive – audible tone and display iconalerts you to a live wire

• Saves 1000 results – large internal memoryenables continuous testing and recording;fully compatible with our popularLinkWare™ Cable Test ManagementSoftware

• Quickly locate cable fault, polarity, andconnector problems with VisiFault™ VFL*

• Inspect end-faces at 200x magnification withthe FT120 FiberViewer or FT500FiberInspector Mini*

With new advanced capabilities that make testing simple, SimpliFiber® Pro Optical Power Meter and Fiber Test Kits arethe best “go-to” kits for anyone involved in first-line optical fiber cabling installation and verification. Whether you are afiber technician or contractor, our expertly configured kits contain all the tools necessary to quickly measure loss andpower levels, locate faults and polarity issues, and inspect and clean connector end-faces. Industry-leading featuressuch as single-port dual-wavelength testing and auto-wavelength detection, combined with time-saving capabilitiessuch as CheckActive™, FindFiber™, and Min/Max make SimpliFiber Pro the best fiber test kit on the market. BASIC VERIFICATION KIT (MULTIMODE)Includes SimpliFiber Pro power meter, 850/1300 multimode source (SC port), and carrying case.BASIC VERIFICATION KIT (SINGLEMODE)Includes SimpliFiber Pro power meter, 1310/1550 singlemode source (SC port), and carrying case.FULL-FEATURED VERIFICATION KIT with FIBERVIEWERIncludes SimpliFiber Pro power meter, 850/1300 source (SC port), FindFiber Remote ID source, FT120 FiberVieweroptical microscope, VisiFault VFL, LC and ST adapters, and carrying case.FULL-FEATURED VERIFICATION KIT with FIBERINSPECTOR MINI Includes SimpliFiber Pro power meter, 850/1300 source (SC port), FindFiber Remote ID source, FT500 FiberViewervideo microscope, VisiFault VFL, LC and ST adapters, and carrying case.COMPLETE FIBER VERIFICATION KITIncludes SimpliFiber Pro power meter, 850/1300 and 1310/1500 sources (SC port), two (2) FindFiber Remote IDsources, FT500 FiberViewer video microscope, VisiFault VFL, LC and ST adapters, NFC-KIT-BOX cleaning equipment,and carrying case.

KIT CONTENTS AT A GLANCE

*Not available in all kit configurations

FTK1450



9


CABLE TESTERS (FIBER)


Mfg. Part No. FTK-150SimpliFiber™ Power Meter

SimpliFiber™ Sources850nm and 1300nm

SimpliFiber™ Sources1310nm and 1550nmVisiFault™ Visual Fault LocatorFT120 200X Fiber ViewerFiberInspector Mini VideoViewerCableIQ™ Advanced IT KitCarrying Casefor protection and easy transport

Mfg. Part No. Description Stock No. Price EachCIQ-100 CableIQ Qualification Tester 73J6912 1075.00

Mfg. part no. CIQ-Kit advanced IT kit includes CableIQ™ qualification tester with remote adapter, CableIQ™ Reportersoftware CD, Intellitone 200 digital probe, 6 remote office ID’s, (2) RJ-45-RJ45 patch cords, USB cable, coax ″F″push-on adapter, 75-ohm coax patch cord, RJ45/11 universal coupler, CD and user guides, test accessory soft pouch,hardside carrying case, and (4) AA batteries.

CIQ-KIT CableIQ Advanced IT Kit 73J6909 1625.00Mfg. part no. CIQ-KRQ residential qualifier kit includes CableIQ™ qualification tester, (2) RJ-45 patch cords, (2) RJ11patch cords, USB and coax cable, bare wire and speaker wire adapters, coax BNC and RCA adapters, pack of 50″Qualified″ labels, CD and user guides, softside carrying case, and (4) AA batteries.

CIQ-KRQ CableIQ Residential Qualifier Kit 44K0059 1175.00Mfg. part no. CIQ-SVC service kit includes CableIQ qualification tester with remote adapter, LinkRunner NetworkMultimeter, IntellTone 200 Probe, six remote office IDs, rugged carrying case and all needed batteries.

CIQ-SVC CableIQ Service Kit 17M9683 2025.00Mfg. part no. CIQ-GSV includes CableIQ Qualification Tester with remote adapter, LinkRunner Pro Network Multimeter,IntelliTone 200 Probe, six remote cable IDs, rugged carrying case, and all needed batteries

CIQ-GSV CableIQ Gigabit Service Kit 50M3437 2475.00CableIQ™ ACCESSORIESMfg. part no. C1Q-Coax CableIQ™ coax adapter kit includes F, BNC, and RCA connectors.

CIQ-IDK24 CableIQ Remote Identifier Kit, Numbers 2-4 73J6907 235.00CIQ-IDK57 CableIQ Remote Identifier Kit, Numbers 5-7 73J6908 235.00CIQ-COAX CableIQ Coax Adapter Kit 73J6906 19.95CIQ-SPKR CableIQ Speaker Wire Adapter 73J6911 54.95CIQ-RJA CableIQ RJ45/11 Modular Adapter 73J6910 44.95CIQ-QL CableIQ ″Qualified″ Labels , Pkg. of 50 44K0060 6.95CIQ-CIT CableIQ Hardside Carrying Case 73J6905 79.00

Mfg. Part No. Description Stock No. Price

OF-500-01/50M OptiFiber Multimode OTDR (50um Accessories) 85K1327 13995.00

OF-500-02/50M OptiFiber Advanced Multimode OTDR (50um Accessories) 85K1328 14995.00OF-500-03 OptiFiber Singlemode OTDR 17M8965 12760.00OF-500-10 OptiFiber Certifying Multimode OTDR 87H9533 19995.00OF-500-10/50M OptiFiber Certifying Multimode OTDR (50um Accessories) 85K1329 19995.00OF-500-13 OptiFiber Singlemode SR Certifying OTDR 18M6177 23351.00OF-500-15 OptiFiber SR Certifying OTDR 21J6262 24990.00OF-500-15/50M OptiFiber SR Certifying OTDR (50um Accessories) 85K1330 24990.00OF-500-35 OptiFiber Pro Inspector LL OTDR 21J6263 30795.00OF-500-35/50M OptiFiber MM/SM Pro Inspector LL OTDR (50um and SM

Accessories)85K1331 30795.00

OF-500-45 OptiFiber MM/SM Certifying OTDR 18M6178 39126.00SMART REMOTE MODULESMfg. part no. OFSR-MMREM OptiFiber™ smart remote with multimode module package is used with the OptiFiber™mainframe to cerify multimode fiber using standards-based two fiber, dual wavelength DTX fiber module methodology.Mfg. part no. OFSR-SFM singlemode module for smart remote is used with the OptiFiber™ smart remote to certifysinglemode fiber using standards-based two fiber, dual wavelength DTX fiber module methodology. Mfg. part no.OFSR-MFM multimode module for smart remote is used with the OptiFiber™ smart remote to certifiy multimode fiberusing standards-based two fiber, dual wavelength DTX fiber module methodology.

Mfg. Part No. Description Stock No. Price EachOFSR-MMREM Smart Remote with Multimode Module Package, USB, Mini

B Connector21J6276 4995.00

OFSR-SFM Singlemode Module for Smart Remote 21J6278 2995.00OFSR-MFM Multimode Module for Smart Remote 21J6279 1995.00

Mfg. Part No. Description Stock No. Price EachFT600 FiberInspector Pro 56J8960 3495.00OFTM-5352 FiberInspector Pro for OptiFiber Certfying OTDR 41J2293 2495.00NF366 FiberInspector E2000 Video Probe Adapter Tip 21J6271 567.00

Mfg. Part No. Description Stock No. Price EachFTK150 Basic Fiber Verification Test Kit 76K2754 1695.00FT525 Fiber Inspector Mini and cleaning kit 62M4288 1670.00

(83782)

(74094)

(83017)

CableIQ™ QUALIFICATION TESTER, KITSAND ACCESSORIES

(87530)

OptiFiber™ Professional OTDR gives private network owners the visibilityinto fiber network to quickly isolate faults, restore network performanceand meet the emerging requirements for fiber testing and certification. Inaddition, OptiFiber™ integrates loss and fiber length measurement, OTDRanalysis,and fiber connector end-face imaging to provide extended certifi-cation and diagnostics. The companion LinkWare PC software documents,reports and manages all test data.

FIBERINSPECTOR PRO™ VIDEOMICROSCOPE

FiberInspector Pro Video Microscope is a portable video microscope that provide superior vision to inspect fiber while it’sstill in place. It works 10 times faster than traditional scopes — saving valuable time inspecting installed fiberterminations in hardware devices and patch panels. Eliminate the #1 cause of fiber failure: contamination. The displaysprovides crisp, clear images of microscopic debris and end-face damage. Simply insert the video probe and inspectinstalled fiber connectors through the bulkhead adapters without accessing the backside of the patch panels.

• Boost productivity with an easy-to-use interface and small,lightweight design

• Diagnose fiber cabling issues with integrated ChannelMap™,auto OTDR and fiber end-face inspection

• Certify fiber with integrated Auto OTDR analysis, automatedloss and length measurements and fiber end-face inspection

• Enhance visibility into premise, campus and metro networkswith short event dead zones

• Document fiber with LinkWare PC data management andreporting software

• Qualifies — sees if existing cabling has the bandwidth to support voice, 10/100, VoIP or gigabit Ethernet

• Troubleshoots — shows why existing cabling cannot support the network’sbandwidth requirement (e.g. crosstalk at 11 meters)

• Discovers — detects what’s at the end of any cable and displays deviceconfiguration (Speed/Duplex/Pairing)

• Identifies unused switch ports that can be reallocated• Graphically maps wiring configuration and shows distance to faults with

intelligent wiremap• Tests all copper cabling media: twisted-pair, coax, and audio cable

SIMPLIFIBER™ OPTICAL LOSS TEST KIT

• Tests singlemode and multimode links • Verify system loss and power levels at 850nm,

1300nm, 1310nm, 1550nm withSimpliFiber™ Power Meter and Sources

• Easily inspects installed fiber end-faceson patch panels, patch cords andhardware devices

• Eliminates hazards of inspecting live fiber• Ten times faster than traditional

microscopes• New displays provide crisp, clear images

of microscopic debris and end-facedamage

• Various probe adapter tips allow forinspection through different connectorport types

Mfg. part no. CIQ-100 CableIQ™ qualification tester is designed to meet the emerging needs ofnetwork technicians who need to upgrade to higher network speeds and troubleshoot connectiv-ity problems. It allows network technicians to perform a series of troubleshooting steps to betterisolate cabling from network problems and identifies whether insufficient cabling bandwidth isthe cause of the problem. Supports UTP, STP, FTP, SSTP, RG6, RG59, audio and security typecable. Supported tests include wiremap, length, cable signal performance, digital and analogtoner, Ethernet port detection and ID, analog phone and video signal detection, continuity, andcable fault finding. Measures crosstalk and impedance and compares against appropriate limitsbased on qualification test selected. Tester stores up to 250 qualification test results.

OPTIFIBER™ CERTIFYING OTDR

Mfg. part no. FT600 includes 250/400x dual magnification probe, display with 3.5″ screen, AC adapter/battery charger,probe adapter tips (ST, SC, FC and universal 2.5mm patch cord tip) and hard carrying case.

SimpliFiber™ optical loss test kits provide all the tools needed to verifyproper installation and maintain optical fiber cabling infrastructures inone protective carrying case.

OptiFiber™ has several models to choose from. All come with a mainframe, battery, carrying strap, AC power supply,USB cable, 32MB MMC card, compact disk with quick reference guide, manuals, LinkWare management software and62.5um launch fiber cable.

Mfg. part no. CIQ-100 CableIQ™ qualification tester comes complete with remote adapter, CableIQ™ Reportersoftware CD, two RJ-45-RJ45 patch cords, USB cable, coax ″F″ push-on adapter, CD and user guides, softside carryingcase and four AA batteries.

BASIC FIBER VERIFICATION TEST KITMfg. part no. FTK-150 is a starter kit for installing and maintaining fiberlinks with multimode optical fiber. Verifies optical loss and power levelsat 850nm and 1300nm. Order singlemode sources, microscope, andvisual fault locator as needed; go online or call.FIBERINSPECTOR MINI™ AND CLEANING KIT Mfg. part no. FT525. Use FiberInspector™ Mini to examine installedfiber terminations or ensure terminations are smooth and clean. Avoidthe #1cause of fiber link failure: dirty end-faces. Includes cleaning cube,10 cleaning cards, solvent pen, port cleaning swabs and soft carry case.

CableIQ™ TESTER AND KITS

KIT CONTENTS AT A GLANCE


2224

9


LAN TESTERS


(148886)

Mfg. Part No. Description Stock No. Price EachES2-LAN-SX/I EtherScope S2 LAN Analyzer with SX Fiber and ITO 05M6677 9995.00ES2-PRO-SX/I EtherScope S2 LAN and Wireless LAN Analyzer, SX Fiber

and ITO30M8899 10900.00

ES2-PRO-SX/I-AA EtherScope S2 LAN and Wireless LAN Analyzer, SX Fiber,ITO and AnalyzeAir Software

30M8900 12995.00

ES2-PRO-SXLX-I/S EtherScope S2 LAN and Wireless LAN Analyzer, SX abndLX Fiber, ITO and ES-ACCY KIT*

18M6111 10995.00

ACCESSORIES

ES2-SX SX Gig Fiber SFP Transceiver (850nm VCSEL,Replacement Item)

18M6114 199.00

ES2-LX LX Gig Fiber SFP Transceiver (1310nm FP Laser, SXFiber Option Required)

18M6109 399.00

ES2-ZX ZX Gig Fiber SFP Transceiver (1550nm DFB Laser, SXFiber Option Required)

18M6116 2295.00

ES-ACCY-KIT* Etherscope S2 Accessories Kit 62K4573 895.00DSP-FTK Fiber Optic Test Kit, 850nm and 1300nm LED Source,

and 850/1300/1550 nm Meter16F9098 1249.00

ES-BATTERY Replacement Battery 56J8958 350.00ES-BATT-CHG External Battery Charger 56J8957 195.00WIREVIEW 2-6 Remote Identifiers 2-6 62K5705 315.00OPVS2-KB Mini USB Keyboard 33K4161 125.00ES-WCARD Replacement WLAN Card (Hardware Only) 62K4583 395.00DTX-ACUN Universal AC Charger 40K6052 50.00OPV-POE Power Over Ethernet Adapter 29K6247 68.00MT-8200-63A IntelliTone Pro 200 Probe 92H6887 104.00MT-8200-53A IntelliTone Pro 100 Probe 92H6884 83.00944806 Null Modem Cable (DB9) 45M5783 13.97

Mfg. Part No. Description Stock No. Price EachNTS2-VOIP 10/100/1000 Inline Testing, VoIP Application, NetProve,

PoE, IntelliTone Toning, Reporter18M6175 2995.00

NTS2-PRO 10/100/1000 Inline Testing, NetProve, PoE, IntelliToneToning, Reporter

18M6174 2495.00

NT-VOIP 10/100 Inline Testing, VoIP Application, Reporter 27K6765 1995.00

NT 10/100 Single-Ended Testing 18C2600 995.00NETTOOL™ SERIES II UPGRADE

NTS2-VOIP-OPT VoIP Option to Upgrade NTS2-PRO to NTS2-VOIP 18M6176 595.00

Features LinkRunner LinkRunner ProLink/Ping Speed 10/100 10/100/1000POTS/ISDN/Ethernet Detection

Cable Wiremap

Discovery Protocols CPD/EPD CPD/EPD/LLPDIntelliTone Digital Toning

PoE Verification

Configurable Ping List 10 IP Addresses802.1X Authentication

Link Status Reports

USB Application Port

Protective Rubber Mold

(83015)

Mfg. Part No. Description Stock No. Price EachES2-DTX-PRO-KIT Pro Technician Tool Kit — DTX-1800-M and ES2-PRO-

SX/I-KIT73P9500 23215.35

LAN technician kit includes both the mfg. part no. DTX-1800 and mfg. part no. ES2-LAN-SX plus all the basics forcopper cable certification and wired LAN troubleshooting. Handles 10Mbps-to-10Gig copper cable certification and10/100/Gig Ethernet troubleshooting. The DTX-1800 CableAnalyzer™ includes main and smart remote, LinkWare PCsoftware, 128MB MMC card, Cat 6A/Class EA permanent link adapters, Cat 6/Class E channel adapters, headsets fortalk, AC chargers, carrying case, USB iInterface cable (Mini-B), Serial RS-232 cable (DB9 to IEEE1394), and user manual.The EtherScope™ Series II Network Assistant LAN-SX includes mainframe with LAN option, SX SFP with fiber option,rechargeable Li-Ion battery pack (installed), protective holster, carrying strap, carrying case, AC adapter/battery charger,wire map remote, RJ-45 coupler, patch cable, 128 MB CompactFlash® card and resource CD.

Mfg. Part No. Description Stock No. Price EachES2-DTX-LAN-KIT LAN Technician Tool Kit — DTX-1800 and ES2-LAN-SX 73P9499 15474.00

Mfg. Part No. Description Stock No. Price LRPRO-1000 LinkRunner Pro Network Multimeter 43M0075 999.00LINKRUNNER LinkRunner Network Multimeter 76C0203 450.00LINKRUNNER-KIT LinkRunner Network Multimeter Extended Test Kit 76C0204 895.00LRPRO-KIT LinkRunner Pro Extended Test Kit 50M4150 1499.00

LINKRUNNER™ ACCESSORIES

NT-BATT-CHG NiMH Battery Charger, 1.25A 18C2620 62.00BATT-AA-NIMH Rechargable AA NiMH Battery Pack 18C2610 15.00LR-HOLSTER Holster Storage Case 44K0061 20.00

(61370)

ETHERSCOPE™ SERIES II NETWORKASSISTANT LAN ANALYZERS

NETTOOL™ SERIES II NETWORKTESTERS AND ACCESSORIES

(145371)

(74095)

• NetProve™ diagnostics – isolate device and applicationconnectivity issues in seconds

• Quickly resolve and document network problems with powerfulinline visibility into 10/100/Gig links between switches, PCs, IPphones and other devices

• Connect inline for visibility into VoIP calls to quickly diagnose IPphone boot-up and call control problems and to measure keycall quality metrics

• Verify readiness of PoE systems and troubleshoot PoE deviceproblems

• IntelliTone™ digital cable location and isolation technologyspeeds cable troubleshooting

NETWORKTECHNICIAN TOOLKITS

• Analyze 10/100/Gigabit twisted pair and Gigabit fiber opticEthernet LANs

• Troubleshoot performance and connection issues• Monitor traffic statistics• Measure throughput, latency and frame loss per RFC 2544 at

rates up to 1 Gbps over copper or optical fiber cabling• Analyze 802.11a/b/g wireless LANs• Secure your WLAN by identifying and locating unauthorized

rogue devices

LINKRUNNER™ NETWORK MULTIMETER,KIT AND ACCESSORIES

NETTOOL™ SERIES II NETWORK TESTERS

• Maximize value when purchasing a DTX CableAnalyzer™and EtherScope™ together in a kit!

• Install, validate and troubleshoot LANs fast• Get two of the best in class solutions for cable certification

and Ethernet performance assessment• DTX-1800 CableAnalyzer™ reduces the total time to certify

network cabling• EtherScope™ Series II Network Assistant reduces the time

to measure Ethernet performance and validate LAN services

Mfg part nos. LRPRO-1000 and LINKRUNNER Network Multimeters arethe essential tools to quickly verify and troubleshoot network drops. Mfg.part no. LR-KDW includes the LinkRunner Network Multimeter as well asKey Device Watch software to monitor networks and alert user of failures,reports and network maps. Mfg. part no. LINKRUNNER-KIT extended testkit includes: LinkRunner™ Network Multimeter, cable ID kit (#1-8),wiremap adapter, RJ-45 coupler, IntelliTone 100 probe, test clip set, NiMHbattery pack, NiMH battery charger, custom carrying case, and PC Inspec-tor. Mfg. part no. LRPRO-KIT includes LinkRunner Pro, IntelliTone Pro 200Probe, WireView Cable IDs #1-6, CLIP-SET RJ45 to 8-alligator-clip barewire adapter, LinkRunner Connect software CD, test accessory soft pouch,USB cable, LinkRunner Pro Getting Started Guide, IntelliTone Pro GettingStarted Guide, 4 AA alkaline batteries, one 9V alkaline battery, carry case.

EtherScope™ Series II Analyzers are the essential toolkits for first responders. They combine the right troubleshootingtools in a handheld platform to help network professionals solve a wide range of problems fast. Features includetroubleshooting switched networks, characterizing the performance of LAN and WAN links, and discovering accesspoints, devices, mobile clients, networks and VLANs.

LRPRO-1000

Pro technician kit includes both mfg. part no. DTX-1800-M and mfg. part no. ES2-PRO-SX/I-KIT plus everythingneeded for copper and fiber cable certification, Ethernet performance assessment, and wired and wireless LANtroubleshooting. Handles 10Mbps-to-10Gig copper cable certification, multimode fiber certification (Tier I), 10/100/GigEthernet troubleshooting, 802.11 wireless LAN troubleshooting, Gigabit Ethernet performance measurement withLinkRunner™ Pro Reflector and service performance assessment. The DTX-1800M includes DTX-1800 CableAna-lyze™ with a set of DTX-MFM2 multimode fiber modules, and user manual. The EtherScope™ Series II NetworkAssistant PRO-SX/I-KIT includes mainframe with LAN option, 802.11a/b/g adapter with WLAN option, SX SFP with fiberoption, ITO/RFC2544 option, external directional antenna, rechargeable Li-Ion battery pack (installed), protective holster,carrying strap, carrying case, AC adapter/battery charger, wire map remote, RJ-45 coupler, patch cable, 128MBCompactFlash® card and resource CD, and LinkRunner™ Pro with Reflector, Li-Ion battery, AC adapter/battery charger,and carrying case.

*Mfg. part no. ES-ACCY-KIT contains an EtherScope battery, external battery charger, AC charger and line cord,USB mini keyboard, WireView identifiers #2 - #6 and a larger carrying case.



9


POWER QUALITY ANALYZERS


FLUKE-430 SERIES THREE-PHASE POWER QUALITY ANALYZERS (CONT.)

Volts/Amps/Hertz TransientsTrue-Rms Voltage: (AC + DC) 5.0V to 1240V* True-RMs Current: (AC + DC) 50.00 to 1250KA Frequency: 10.0Hz to 15.0KHz

Minimum Pulse Width: 40ns Voltage Threshold Settings: 20%, 50%, 100%, 200%

Power Display Inrush CurrentWatts, VA, VAR Reactive Power 1-Phase and 3-Phase, onBalanced Loads: 250W to 1.56 GW PF Power Factor: 0.00 to 1.0 DPF Displacement Power Factor: 0.00 to 0.25

Current Ranges (Selectable): 1A to 1000A Inrush Times (Selectable): 1sec. to 5 min.

Specifications Fluke VR1710Operating Volage 70V to 300VMIN/MAX/AVG RMS value Resolution 0.125Number of Events 175,000Voltage Resolution 0.125VHarmonics Measurement EN 610000-4-7 (up to 32nd)Number of Recording Channels 1 Phase to Neutral

2 Phase/Neutral to GroundFrequency Range 50 Hz ± 1 Hz and 60 Hz ± 1 Hz Harmonics Measurement Cat II 300V

Mfg. Part No. Description Stock No. Price EachVR1710 VR1710 Plug-in Voltage Quality Recorder 64M6536 779.00

Current Measuring Range 0 to 2000A DC or 1400 AC rmsVoltage Measuring Range 0 to 825V DC or AC rmsWatts Measuring Range (Single- and Three-Phase) 0 to 1650kW DC or 1200kW ACVA Measuring Range (Single- and Three-Phase) 0 to 1650kVA DC or 1200kVA ACVAR Measuring Range (Single- and Three-Phase) 0 to 1250kVARFrequency (From Current or Voltage Sources) 15Hz to 1kHzJaw Opening/Capacity 2.36″/2.28″ Dia.Overall Size 12L x 3.75W x 2″H

(103578)

Mfg. part no. FLUKE-43B power quality analyzer performs the measurements you need to maintain power systems,troubleshoot power problems and diagnose equipment failures. Combines capabilities of a power quality analyzer,multimeter and scope. Calculates 3-phase power on balanced loads, from a single-phase measurement. Measurespower harmonics, captures voltage sags, transients and inrush current. Monitoring functions help track intermittentproblems. Single keystroke toggle for most commonly-used power quality modes . Records 2 selectable parameters forup to 16 days. Flukeview software provides a complete harmonic profile up to 51st harmonic. Measures resistance,diode voltage drop, continuity, and capacitance. Includes voltage probes, 500A current clamp, Flukeview™ softwareand optically isolated interface cable. 3-year manufacturer’s warranty on the FLUKE-43B analyzer, 1-year manu-facturer’s warranty on accessories. Order mfg. part no. 1400S AC current clamp separately below.

Mfg. Part No. Description Stock No. Price EachFLUKE-345 Power Quality Clamp Meter 30M9566 1707.00

FLUKE VR1710 VOLTAGE QUALITY RECORDER

SPECIFICATIONS

Mfg. Part Nos. Fluke-434* Fluke-435Fully Class A Compliant

Report Generation and Logger Analysis Software Power Log

*To Add These Three FeaturesOrder Fluke-434/LOG Upgrade Kit

separately below

Logger Function with Multi-Parameter Logging, Mains Signaling

Mains Signaling

Voltage Accuracy 0.5% of nominal Class A - 0.1% of nominalMemory 8MbCurrent Probes 40A/400A Clamp (Four) 4000A Flexible (Four)Carrying Case Rugged Hard Case Watertight Hard Case with RollersGPS Time Synchronization When used with

Mfg. Part No. GPS430 Module;order separately below

When used with Mfg. Part No. GPS430 Module;

order separately below

Mfg. Part No. Description Stock No. Price EachFLUKE-434/003 Power Quality Analyzer, Three-Phase 56J9491 5212.00FLUKE-435/003 Logging Power Quality Analyzer, Three-Phase 83K1732 7293.00

ACCESSORIES

C435 Watertight Hard Storage Case with Rollers 83K1711 432.00GPS430 GPS Time Synchronization Module 83K1734 1150.00FLUKE-434/LOG Firmware/Software Upgrade Kit 83K1731 1654.00I430-FLEX 3000A Flexible Current Probe; Sold Individually 83K1735 358.10I5SPQ3 5A AC Current Clamp 43K8758 997.85TLS430 Replacement Test Leads 56J9494 93.60

• Fast and easy recording of voltage trends, dropouts, and powerquality

• Easy to use• Continuous recording of all values with no gaps• Clear graphical summary of data and quick overview of key

power quality parameters• Min, Max, Average RMS values (1/4 cycle) with time stamps• Actual transient display (>100 µs) with time stamp• Flicker according to EN 61000-4-15, individual harmonic and

THD values with trends• Statistical analysis of voltage event• Includes PowerLog software package for quick download,

analysis, and automatic reporting

(90371)

FLUKE-345 POWERQUALITY CLAMP METER

(82913)

FLUKE-43BPOWER QUALITYANALYZER

Mfg. part no. Flule VR1710 is a single-phase, plug-in voltage quality recorder for detecting and recording voltagequality problems. Voltage quality parameters including RMS average, transients, flicker, and harmonics up to the 32ndare recorded using a user-selected average period from 3 seconds to 10 minutes.The Fluke VR1710 satisfies the needsof maintenance and facilities management personnel in industrial, utilities, and large service organizations wherereliable voltage quality is essential.

Mfg. part no. FLUKE-345 power quality clamp meter features a bright, color LCD displaywith 2-level backlight to analyze the harmonic spectrum, a low-pass filter to remove highfrequency noise, and a high EMC immunity design. Ideal for commissioning, trouble-shooting and measuring modern electrical switching loads, such as variable frequencydrives, electronic lighting and UPS systems. Additionally, the Hall Effect measurementsystem makes measurement of DC current possible without the need to break the circuit,and the internal memory enables long-term datalogging for analysis of trends orintermittent problems. Meter comes complete with Power Log software, test leads andprobes, alligator clips, USB cable, international AC adapter/battery eliminator, softcarrying case, printed user manual and multi-language manual on CD .

FLUKE-430 SERIES THREE-PHASE POWER QUALITYANALYZERS

• Measure all three phases and neutral with included four current probes• AutoTrend: every measurement is always automatically recorded, without any setup • System-Monitor: Up to seven power quality parameters on one screen according to EN50160 • Inrush mode for troubleshooting nuisance circuit breaker tripping• Rugged, hand-held troubleshooter with three- year manufacturer’s warranty• Seven hours operating time per charge on NiMH battery pack • View graphs and generate reports with included analysis software

• Clamp-on measurement without breaking the circuit • Accurate in noisy environments even with distorted waveforms • Datalogging power parameters for minutes or months• Troubleshoot, analyze and log harmonics digitally or graphically• Capture and analyze nuisance tripping, from 3 to 300 seconds• 3-Phase power — built-in capability for balanced loads• View graphs and generate reports with Power Log software• 600V CAT IV safety rating, CSA certified, CE compliant

• Troubleshoot real-time: Analyze the trends using the cursors and zoom tools — even while backgroundrecording continues

• Highest safety rating in the industry — 600V Cat IV / 1000V CAT III• Automatic transient mode captures 200kHz waveform data on all phases simultaneously — up to 6kV

Mfg. part nos. Fluke-434 and Fluke-435 three-phase power quality analyzers help locate, predict, prevent andtroubleshoot problems in three- and single-phase power distribution systems. Troubleshooting is faster with on-screendisplay of trends and captured events, even while background recording continues. Measures voltage, current, dips,swells, interruptions, harmonics, inter-harmonics, flicker, power, energy, transients, frequency, unbalance, inrush,EN50160 overview. The new IEC standards for flicker, harmonics and power quality are built right in to take the guesswork out of power quality. Both models include USB cable, color localization set, FlukeView® analysis software, five testleads (four black, one green), five test clips (four black, one green), current probes, NiMH battery pack and charger, hardcarrying case, user manual CD, and printed ″getting-started″ manual.

SPECIFICATIONS

FLUKE-434/003

In Addition — Only Fluke-435 Features:• Fully Class A Compliant — conduct tests according to the stringent international IEC 61000-4-30 Class A

standard • Logger function — configure for any test condition with memory for over 400 parameters at user defined

intervals • Mains signaling — measure interference from ripple control signals at specific frequencies

Both Models Feature:

FLUKE-435/003

COMPARISION AT A GLANCE:


2226

9




FLUKE-1740 SERIES POWER QUALITY LOGGERS-MEMOBOX (CONT.)FLUKE-43B POWER QUALITY ANALYZER (CONT.)

Volts/Amps/Hertz TransientsVolts, Amps, Watts: 2 to 51st Harmonic Phase: 2nd (±3°) . . . 51st (±15°)

Input Impedance: 1MΩBandwidth Input: 1 (Voltage): DC to 20 MHZ TimeBase: 60 s/div to 20 ns/divSampling Rate: 25MS/s

General DMMRated: 600Vrms Category III Surge Protection: 6KV on Input 1 and 2 Floating Measurements: 600Vrms From Any Terminal to Ground

Resistance: 500.0Ω to 30.00 MΩCapacitance: 50.00nF, to 500.0µFTemperature:** -100.0°C to 400.0°C

Mfg. Part No. Description Stock No. Price EachFLUKE-1750 3-Phase Power Quality Recorder 23M4644 11485.00

Mfg. Part No. Description Stock No. Price EachFLUKE-43B/003 Power Quality Analyzer 31C1557 2762.00I400S AC Current Clamp 56J9493 218.95

Mfg. Part No. Description Stock No. Price EachFLUKE-1735 Power Logger-Analyst 83K1727 2842.00

ACCESSORIES

MBX CLAW-GRIP MBX CLAW-GRIP Safety Claw-Grip Test Lead withBuilt-in 2A Fuse

66K7479 95.00

MBX USB-RS232 MBX USB-RS232 USB-to-Serial (DB-9 Male) Converter 66K7488 41.00MBX 300 POLESET MBX 300 POLESET Pole Mounting Kit — Incl. One Plate,

One Strap 66K7491 39.00

(94364)

Supplied Current Transducer DM-CT-HTA 1000A Standard CT 2”internal diameter CT +/-(0.5% Rdg + 2 LSD

AC Current DM-CT-100:0.5A to 100A / DM-CT-HTA:5 - 1000A /AM-FLEX33: Selectable: 5 – 1000A or 15 - 3000A +/-(0.5% Rdg + 2 LSD)

AC VoltageIncluding Sags and Surges

0 - 600V +/-(0.5% Rdg + 2 LSD

FLUKE 1750 3-PHASE POWERQUALITY RECORDER

(88084)

(68961)

• Premium accuracy and measurement techniques:Guaranteed for all power quality parameters, with IEC61000-4-30 Class A measurement systems

• Quick and reliable configuration: PDA wireless “front panelinterface” provides a window into what the instrument isrecording, enabling quick and reliable configuration even inawkward test locations

• Threshold-free set up: Apply thresholds after data iscollected with Fluke Power Analyze Software

• Captures everything: Cross-channel and current triggeringcapture every measurement, on every channel, every time

• Intuitive PC software: Easily analyze data and generatereports

• Plug and play: Set up in minutes with self-identifyingcurrent probes and single-lead voltage connections

FLUKE-1735 POWERLOGGER-ANALYST

Mfg. Part Nos. FLUKE-1743 FLUKE-1744 FLUKE-1745Logs Voltage, Current, Dips, Swells, Interruptions, Voltage Harmonics, Power Energy

Logs Current Harmonics, Interharmonics, Flicker, Frequency

Dust/Water Resistance IP65 IP65 IP50Display LEDs LEDs LEDs + LCDUPS 1s 1s >5 hrs.Memory 4MB 4MB 8MB

• No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections arenot correct

• Measure every parameter: Voltage and current on three phases, neutral, and ground • 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events • Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection

Mfg. Part No. Description Stock No. Price EachFLUKE-1743 60Hz Power Quality Logger-Memobox 83K1728 4295.00FLUKE-1744 60Hz Power Quality Logger-Memobox 83K1729 5395.00FLUKE-1745 60Hz Power Quality Logger-Memobox 83K1730 6495.00

ACCESSORIES

MBX CLAW-GRIP MBX CLAW-GRIP Safety Claw-Grip Test Lead withBuilt-in 2A Fuse

66K7479 95.00

MBX USB-RS232 MBX USB-RS232 USB-to-Serial (DB-9 Male)Converter

66K7488 41.00

MBX 300 POLESET MBX 300 POLESET Pole Mounting Kit — Incl. OnePlate, One Strap — Incl. One Plate, One Strap

66K7491 39.00

I20A/200A CLAMP PQ4 Clamp PQ3 3-Phase 1A/10A 46P4452 649.00I5A/50A CLAMP PQ4 Clamp PQ3 3-Phase 1A/10A 58M2823 649.00I1A/10A CLAMP PQ4 Clamp PQ3 3-Phase 1A/10A 58M2824 649.00I5A/50A CLAMP PQ3 Clamp PQ3 3-Phase 1A/10A 71M4066 495.00I1A/10A CLAMP PQ3 Clamp PQ3 3-Phase 1A/10A 71M4064 495.003000/6000A FLEX 4 36 in. Flexi Probe 4 Phase 72M5141 1658.00

• Record loading according to NEC 30-day load study requirement• Monitor demand at 15 minute or user-defined averaging periods• Prove the benefit of efficiency improvements with energy

consumption tests• Measure harmonic distortion caused by electronic loads• Improve reliability by capturing voltage dips and swells from load

switching• Easily confirm instrument setup with color display of waveforms

and trends • Measure all three phases and neutral with included 4 flexible

current probes• View graphs and generate reports with included Power Log

software• Compact, rugged design with IP65 case• Rated 600V CAT III• 2-year manufacturer’s warranty

POWER QUALITYRECORDER KITS

*Rated 600V CAT III, **Requires Optional Temperature Accessory

(88085)

FLUKE-1740 SERIES POWERQUALITY LOGGERS-MEMOBOX

• True RMS (TRMS) • Works with single and three phase

systems (Y and Delta) • Records up to 64 parameters (single or

three phase) simultaneously • Megohmmeter functions: selectable test

voltages up to 1000V • Ground resistance and resistivity

functions:three measuring modes • Phase sequence indication

Fluke 1735 Power Logger-Analyst is the ideal electrician’s tool for conducting load studies according to National ElectricCode 220.65. Sets up in seconds with the included flexible current probes and color display. Logs most electricalparameters and harmonics as well as capturing voltage events. Includes soft carrying case, 4 flexible current probes(15A/150A/3000A), Power Log software, voltage leads and clips, color localization set, PC interface cable , universal ACadapter, printed English manual, and multi-language manual CD.

• Measure all three phases and neutral with included 4 flexible current probes• No power supply or batteries required – logger and current probes are powered from voltage inputs • Accurately validate system performance with IEC 61000-4-30 class A voltage accuracy (0.1% of VI) and

EN50160 overview • Trend recorded data, generate reports, and monitor real-time with included PQ Log software• Set up in minutes with the self-identifying current probes and single lead voltage connections• Assess severity of power quality problems by capturing up to 13.000 dips, swells, or interruptions• 600 V CAT III• 2-year manufacturer’s warranty

Mfg. part nos. DM-III Multitest and DM-III Multitest F measure and record a broad spectrum of power qualityparameters: AC current, AC voltage to 600V including sags and surges, harmonics (THD and individual up to 49th),active, reactive and apparent power and energy, peak demand, power factor, frequency measurement and phasesequence. Both are compatible with a wide range of current transducers, DM-CT-HTA supplied with DM-III Multitestand AM-FLEX33 supplied with DM-III Multitest F. Kits include: CTs, voltage leads, ground probes and leads, PC softwareand download cable.

Fluke 1740 series power quality loggers-memobox are the power quality technician’s everyday instrument. Capable oflogging over 500 parameters for up to 85 days, these power quality loggers help uncover intermittent and hard-to-findissues. The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at theload according to the latest EN50160 standard. All three logger models include a soft carrying case, four flexible currentprobes (15A/150A/1500A /3000A), PQ Log software, voltage test leads and clips, color localization kit, PC interfacecable, international plug adapters, printed English manual, and multi-language manual CD.

SPECIFICATIONS

FLUKE-1743, FLUKE-1744 FLUKE-1745




9




POWERVISA 3-PHASE POWER QUALITYANALYZER

POWER QUALITY RECORDER KITS (CONT.)

(148881)

Mfg. Part No. Description Stock No. Price EachPG106 PowerGuide 4400 Package 59K9503 7750.00CT109 Set of three 2510A CT probes 59K9486 771.00CT101 Set of three RR3035A/24 Flex CT probes, CA4300LEM Adapter,

RR/PS/4P59K9484 2440.00

• 8 independent channels collecting data at 256 samples/cycle/channel

• Meets the most advanced power quality instrumentsstandards, worldwide

• Icon-based, color touch screen • Selectable data collection mode• Selectable data collection length• Low and medium frequency transient capture• RS-232, Ethernet, and USB options• Triggers on voltage and current• Lightweight and portable• Comes with industry-leading Dran-View® power quality

analysis software

(85558)

Mfg. Part No. Description Stock No. Price EachDM-II PLUS Power Quality Recorder 05N1460 3195.00

Harmonics THD, DC and individual up to 49th +/-(0.5% Rdg + 2 LSD)Power Working (W), Reactive (VAR) and

Apparent (VA) +/-(1.0% Rdg + 2 LSDSelectable Fundamental Frequencies 50/60 Hz Safety CATIII, 600V Phase to phase,

CATIII, 300V Phase to ground, EN 61010-1+A2(1996)

(147134)

Mfg. Part No. Description Stock No. Price EachAT1000 Advanced Wire Tracer Kit 16F9054 349.95

AT-2000 series advanced wire tracing kits trace live wires buried or hidden behind walls up to 13-ft. deep. Performtests without having to interrupt power. Locate breakers, neutral and ground lines. Locate and trace wires in walls,floors, conduit, computer cable, etc. Pinpoint shorts, ground faults and broken wires. Choose from four upgradeable wiretracing systems.

Mfg. part no. AT-2001 advanced wire tracer kit includes receiver, 9-300V load signal generator (transmitter), cordset110V plug-to-banana plugs, one fuse, manual and carrying case.

AT2001 Advanced Wire Tracer Kit 96F5469 614.86Mfg. part no. AT-2002 advanced wire tracer kit includes: receiver, 9-600V load signal generator (transmitter), cordset110V plug-to-banana plugs, adapter, one fuse, manual and carrying case.

AT2002 Advanced Wire Tracer Kit 96F5470 749.95Mfg. part no. AT-2004 advanced wire tracer kit includes: receiver, 9-600V load signal generator (transmitter) ,transmitter for open tracing, clamp-on attachment, cordset 110V plug-to-banana plugs, cordset alligator clips-to-banana plugs, adapter, two fuses, manual and carrying case.

AT2004 Advanced Wire Tracer Kit 96F5472 999.95Mfg. part no. AT2005 advanced wire tracer kit includes: receiver, 9-600V load signal generator (transmitter),transmitter for open tracing, clamp-on attachment, battery booster, charger for battery booster, cordset 110Vplug-to-banana plugs, cordset alligator clips-to-banana plugs, adapter, two fuses, manual and carrying case.

AT2005 Advanced Wire Tracer Kit 16F334 1099.95AT-4000 CON series advanced wire tracer kits include: receiver, transmitter, 110V pigtail cordset, alligator clip cordset2pcs., grounding test lead 25ft. with alligator clip, fast acting fuse, manual and carrying case. Additionally, AT4004CONand AT4005CON kits include a clamp-on attachment and AT4005CON also includes a battery booster and charger.

AT-4001CON Advanced Wire Tracer Kit 12M9309 499.95AT-4003CON Advanced Wire Tracer Kit 12M9310 649.95AT-4004CON Advanced Wire Tracer Kit 87K2031 749.95AT-4005CON Advanced Wire Tracer Kit 12M9311 899.95

Mfg. part no. CT-326B current tracer traces energized wires and locates breakers without power interruption: 9-300VAC/DC 300-600VAC. Features 12 sensitivity settings. Locates and traces live wires in walls, floors, conduit, computercable buried or hidden behind walls up to 13-ft. deep. Kit includes power cord, adapter, pigtail connectors, earphone,voltage converter, one fuse, manual and carrying case.

CT326B Current Tracer Kit 89F1200 979.95

Mfg. Part No. Description Stock No. Price EachDM-III MULTITEST PQ Recorder with Standard Current Clamps 66K6290 3495.00DM-III MULTITEST F PQ Recorder with Flexible Current Clamps 66K6291 3495.00

Applications:

POWERGUIDE 3-PHASE,8-CHANNEL POWER MONITOR

(5347)

(147137)

• Troubleshooting power disturbances• Compliance monitoring (IEEE 1159, IEC 61000-4-30 Class A, and EN50160)• Energy surveys (energy consumption, peak demand evaluation, etc.)• Equipment performance testing (evaluating facility power prior to installing new equipment,: checking

whether UPS’s are operating properly.)• Harmonics, interharmonics, and subharmonics capture and analysis

POWER QUALITYRECORDER


• Meets the most advanced power quality instrumentstandards, worldwide

• Icon-based, color touch screen • Selectable data collection mode• Selectable data collection length• Low and medium frequency transient capture• RS-232, Ethernet, and USB options• Triggers on voltage and current• Lightweight and portable• Comes with industry-leading Dran-View® power quality

analysis software

Applications:

Designed for the busy electrician, the PowerVisa® 440D delivers an easy to setup, easy to navigate color graphical touchscreen interface with the advanced horsepower you expect from a Dranetz-BMI power monitor. The PowerVisa®

provides the user with unique tools, such as the Dranetz-BMI annunciator “report card” panel to help users that are newto power quality monitoring successfully collect meaningful data each time they use the instrument. The annunciatorcollects, analyzes and tabulates data on screen in color-coded categories to immediately identify areas of concern(which are identified in red). The user can drill down for more detailed information by simply touching the intuitive touchscreen to troubleshoot problems and locate the source. Automated setup, pre-programmed application modes,real-time scope and meter data, detailed event characterization of RMS variations and transients, and waveform captureare viewed on screen in real time, while being saved to a removable memory card.Mfg. part nos. PV101, PV102 andPV103 all contain flash memory card, soft carrying case, battery charger, voltage cable set with pouch, and user guide.

Mfg. part no. DM-II PLUS is a full-featured three phase power qualityrecorder to maintain, diagnose and troubleshoot electrical systems.User selectable rates allow recording from one hour to several months.Readings and charts can be viewed on the DM-II LCD screen ordownloaded to a PC. Optional transducers available for 100A and3000A (flexible) current capability.

ADVANCED WIRE TRACER KITS

• AC current up to 1000A, AC voltage, active, reactive, apparentpower, energy, peak demand and power factor

• All readings are True RMS• 5 built-in selectable languages: English, French, Italian,

German and Spanish• Works with single and three phase systems (Y & delta)• Capable of recording all parameters (single or three phase)

simultaneously

Mfg. Part No. Description Stock No. Price EachPV10 PowerVisa 4400 mainframe, DRAN-VIEW (USB hasp version/

DVPXHASP version), 3 each TR 2510A probes59K9504 5550.00

PV500 PowerVisa 4400 mainframe, DRAN-VIEW (USB hasp version/DVPXHASP version), 3 each TR 2500A probes

59K9505 5550.00

PVFLEX PowerVisa 4400 mainframe, DRAN-VIEW (USB hasp version/DVPXHASP version), 3 each RR3035A/24 probes, CA4300Adapter, RR/PS/4P

59K9506 6575.00

• Fault recording of electrical malfunctions and identification of faults within a facility’s infrastructure• Inrush evaluation (motors, transformers, breaker trips, etc.)• Long-term monitoring w/min/max/avg and continuous data logging• Compliance monitoring (IEEE 1159, IEC 61000-4-30 Class A, and EN50160)• Power quality surveys, studies and forensic analyses• Energy surveys (energy consumption, peak demand evaluation, etc.)• Equipment optimization (provides RMS triggers and peak threshold crossings to optimize the performance

and longevity of essential equipment)

Mfg. part no. AT1000 advanced wire tracer traces energized lines up to 300VAC/DC, unenergized and openconductors. Identifies breakers and fuses without powering down. Locates shorts, identifies wires in bundles andidentifies control, alarm and telephone system wiring. Receiver range 1 to 3 ft. from cable being traced. Kit includes:receiver, transmitter, 110V pigtail cordset, 2-pc. alligator clip cordset, adapter, manual and softside carrying case.

(85557)

The workhorse, the PowerGuide 4400 lets the user select the length and mode of data collection, simultaneously testingfor power quality, data logging, energy, fault recording, motor health and compliance projects. The PowerGuide 4400has all the features and capabilities of the PowerVisa, plus several unique attributes such as the Dranetz-BMI patentedAnswerModules®. These are exclusive algorithms that tell users the source, severity and cause (direction) of powerproblems. The 4400 includes Sag Directivity, Power Factor Capacitor Switching and Motor Health Annunciator, whichanalyzes a range of motor health parameters to provide advanced warning of factors that could impact motorperformance.

AT1000 AT2005


2228

9


POWER QUALITY ANALYZERS • INSULATION & GROUND RESISTANCE TESTERS


Mfg. Part No. Description Stock No. Price EachFLUKE-1550B 5kV Megohmmeter 89H3660 3432.95

(148857)

Mfg. Part No. FLUKE 1577 FLUKE 1587DMM functions: AC/DC voltage, DC mV, AC/DC mA,

Resistance (0.1Ω-50MΩ), ContinuityInsulation test: 0.1MΩ to 600MΩ 0.01MΩ to 2GΩInsulation test voltages: 500V, 1000V 50V, 100V, 250V, 500V, 1000V

(72287)


PriceEach

PX108 PowerXplorer PX5 Package 59K9507 10620.00CT109 Set of three 2510A CT probes 59K9486 771.00CT101 Set of three RR3035A/24 Flex CT probes, CA4300LEM Adapter, RR/

PS/4P59K9484 2440.00

Mfg. Part No. Description Stock No. Price EachFLUKE-1587 ET Advanced Electrical Troubleshooting DMM Kit 55K4999 794.95

Mfg. Part No.Insulation

Test RangeInsulation

Test Voltages Stock No. Price Each1503 0.1Ω-2000MΩ 500V, 1000V 57K0680 342.951507 0.01MΩ-10GΩ 50V, 100V, 250V, 500V, 1000V 57K0681 453.95

(85509)

Mfg. Part No. Description Stock No. Price EachFLUKE-1577 500-1000V Insulation Multimeter 30K6970 502.95FLUKE-1587 50 -1000V Insulation Multimeter 30K6971 621.95

Mfg. Part No. Description Stock No. Price EachTPAK ToolPak Magnetic and Velcro Strap Tool Hanger 97B3576 33.15FLUKE-C101 Hardside Carrying Case 26K2562 47.65C25 Softside Vinyl Meter Case 44F7741 31.00

1550B MEGOHMMETER

(85559)

• Standard test voltages of 250V, 500V, 1000V, 2500V, 5000V

PX5 POWERQUALITY ANALYZER

FLUKE-1587ET ADVANCED ELECTRICALTROUBLESHOOTING DMM KIT

(84802)

(85521)

• Programmable test voltages available in 50 volt steps from250 to 1000 volts and 100 volt steps from 1000 to 5000 volts

• Automatic calculation of Dielectric Absorption and PolarizationIndex with no additional setup

• Improved ramp function (0 to 5000 VDC) for breakdowntesting

• Measures resistances up to 1 Tera-Ohm• Measures cable or insulation capacitance and leakage current• Warning voltage function alerts the user that voltage is

present and gives the voltage reading up to 600 V AC or DC• Guard system eliminates the effect of surface leakage current

on high-resistance measurements• Measurements can now be stored in up to 99 memory

1503 AND 1507 INSULATION TESTERS


• Meets or exceeds worldwide power quality instrumentsstandards

• Simple to use, icon-based color touch screen• 1 microsecond per channel sampling (voltage and current

triggers)• Ability to create individual annunicator “report card” panels

in addition to standard PQ and motor health options• Lightweight and portable• RS-232, Ethernet, and USB options• Comes with industry-leading Dran-View® power quality

analysis software

FLUKE 1577 AND 1587INSULATION MULTIMETERS

Kit includes:• Fluke-1587 insulation digital multimeter• Fluke-I400 AC current clamp• Fluke-62 mini infrared thermometer• Test probes, test leads and alligator test clips• Durable hardside carrying case• Documentation and users manuals

• Automatic calculation of Polarization Index and Dielectric AbsorptionRatio saves both time and money (mfg. part no. 1507 only)

• Compare (Pass/Fail) function makes repetitive tests simple and easy(mfg. part no. 1507 only)

• Remote test probe makes repetitive or hard-to-reach testing easier• Live circuit detection prevents insulation test if voltage >30V is

detected for added user protection• Auto-discharge of capacitive voltage for added user protection• AC/DC voltage: 0.1V to 600V• 200mA continuity• Resistance: 0.01Ohm to 20.00KOhms• Large, backlit digital display for easy readability• CAT III – 1000V, CAT IV – 600V overvoltage category rating for

added user protection• One-year manufacturer’s warranty• Recommended accessories - TL225 Test Leads, C25 Case, TPAK

Meter Hanger

locations, with each location assigned a unique, user defined, four character (alpha-numeric) label for easyrecall

• Includes improved Quicklink 1550B Software and Optical Interface cable for easier downloading to aWindows® PC

• Runs off of high-capacity rechargeable batteries • 2-year warranty

All models:

Applications:

Mfg. part nos. 1503 and 1507 insulation testers are compact, rugged, reliable, and easy to use. Multiple test voltagesmake them ideal for troubleshooting, commissioning, and preventative maintenance. Additional features save both timeand money. Included accessories: remote probe, test leads and probes, alligator clips. Four AA alkaline batteries (NEDA15A or IEC LR6) for at least 1000 insulation tests. These insulation testers accept mfg. part no. TPAK ToolPak magnetictool hanger to free your hands for other work. Order magnetic tool hanger and carrying cases separately below.

Mfg. part no. Fluke-1587ET advanced electrical troubleshooting DMM kit contains everything needed for preventativemaintenance and troubleshooting electrical system problems. With mfg. part no. Fluke-1587 digital multimeter,perform insulation tests plus a wide-range of DMM tasks, including resistance, capacitance, temperature, continuity,and frequency measuring, with confidence and ease. Use mfg. part no. Fluke I400 current clamp with mfg. part no.Fluke-1587 DMM to accurately measure AC current without breaking the circuit. Check for hot spots and measuretemperature with mfg. part no. Fluke-62 mini noncontact IR thermometer.

Features:

• Power quality surveys and diagnostics, including full event capture, characterization and directionality viaunique AnswerModules.

• Scope-like capture and display of fast transients (as short as 1 microsecond) for capacitor switching, loadshifting, medical diagnostic equipment, et.al.)

• Identification of load distortion and imbalance caused by non-linear loads • Flicker capture (IEC 61000-4-15) and evaluation• Compliance monitoring (IEEE 1159, IEC 61000-4-30 Class A, and EN50160)• Complete harmonics studies, including measurement of current harmonics

• A multimeter and insulation resistance tester all in one meter!• Large backlit display• Auto-discharge of capacitive voltage• Auto power off• Live circuit detection to prevent insulation test when voltage is >30V• CAT III-1000V, CAT IV-600V measurement category• 3-year warranty• Recommended accessories: C25 Case, TLK-225 Accessory Set, i1010

Current Clamp

Mfg. part no. Fluke-1550B 5kV megohmmeter tests the insulation resistance of switchgears, motors, generators andcable. Megohmmeter includes heavy-duty leads, probes, and alligator clips, Quicklink 1550B PC software with interfaceadapter and cable, line cord, soft carrying case with waterproof base, user’s manual and ″getting-started″ guide.

FLUKE 1577 and 1587 insulation multimeters combine a digital insulation tester with a full-featured digital multimeter ina single, compact handheld unit. Provides maximum versatility for both troubleshooting and preventative maintenance.Rugged, reliable and easy to use. Ideal for work on motors, cables and switch gear. Included accessories: Remote probe,test leads and probes, alligator clips, and rugged utility hard case.

For the power expert, the PowerXplorer delivers the most advanced feature set available in a power monitoringinstrument; including high-speed sampling and data capture (1 microsecond/channel and the unique ability to clearlycharacterize non-sinusoidal and unbalanced systems, in a user-friendly package). The PX5 contains all features and capabilities of the PowerGuide 4400, adding the ability to capture transients generatedby fast-switching electronics, medical diagnostic equipment, capacitor switching, lightning, transformer energizationand load shifting. Dranetz-BMI’s patented transient capability captures and characterizes the complete power qualityspectrum, providing scope-like display of the entire transient. The PX5 also measures the full range of arithmetic, vectorand sequencing parameters contained in IEEE 1459, to evaluate distortion created by non-linear electric loads. Thisdistortion can have a significant derating effect, cause overheating of motors and other equipment, and shortenequipment life.

ACCESSORIES

FLUKE 1587

INSULATION TESTERS

FLUKE 1587 Only:

1503 and 1507

• Filter for motor drive measurements• Capacitance, Diode Test, Temperature,

Min/Max, Frequency (Hz)• Also includes K-type thermocouple



9


INSULATION & GROUND RESISTANCE TESTERS


FLUKE-162X SERIES GEO EARTH GROUND TESTERS (CONT.)

Mfg. Part No. Description Stock No. Price EachFLUKE-1587 MDT Advanced Motor and Drive Troubleshooting DMM Kit 55K5000 887.95

Specification Range and ResolutionTesting Voltage 100V to 5000V with 25V IncrementsResistance 100K - 500G OhmsAutomatic Voltmeter 0-5000VConfiguration Memory 20 Programmable Set-Up ConfigurationsInternal Memory 200 Measurements

Features AMB-25 AccuracyInsulation resistance with 250,500,1000V VDC test voltage

0 - 4.000/40.00/400.0/4000 MΩ ±3% Rdg ± 5 LSD <1GΩ

Resistance 0 - 9999Ω 1% Rdg +2 LSDLow Resistance --- 2% Rdg +2 LSDAC/DC Voltage --- ±2.0% Rdg ± 1 LSD

(85510)

FLUKE-1587MDT ADVANCED MOTOR ANDDRIVE TROUBLESHOOTING DMM KIT

Mfg. Part No. Description Stock No. Price EachAMB-25 Digital Megohmmeter 250, 500, 1000 VDC 02J0398 299.95

Mfg. Part Nos. FLUKE-1621 FLUKE-1623 FLUKE-1625Fall of Potential Tests 3 Pole 3 and 4 Pole Using Stakes 4 Pole Using StakesSoil Resistivity Tests 2 Pole 4 Pole Using StakesSelective Tests Use 1 Clamp and StakesStakeless Tests Use 2 Clamps OnlyAutomatic Frequency Control

R* Measurement, Earthing Impedance with 55Hz

Adjustable Limits

Field Service and Industrial Maintenance

Utilities and Telecom

AMB-6D Specifications Range & ResolutionInsulation Resistance with 50VDC Test Voltage 0.01-19.99 49.9, 99.9MΩInsulation Resistance with 100VDC Test Voltage 0.01-19.99 99.9, 1.99.9MΩInsulation Resistance with 250VDC Test Voltage 0.01-19.99 199.9, 249, 499.9MΩInsulation Resistance with 500VDC Test Voltage 0.01-19.99 199.9, 449, 999.9MΩInsulation Resistance with 1000VDC Test Voltage 0.01-19.99 199.9, 999, 1999MΩ

AMB-45 Specifications Range & ResolutionInsulation Resistance with 250, 500, 1000VDC Test Voltage 0 - 4.000 40.00, 400.0 4000MΩLow Resistance 0 - 400.0, 4000MΩAC/DC Voltage 0.1 - 600.0V

(79235)Mfg. Part No. Description Stock No. Price EachFLUKE-1625 KIT Advanced GEO Earth Ground Tester Kit 83K1726 3279.95FLUKE-1623 KIT Basic GEO Earth Ground Tester Kit 83K1724 2289.95FLUKE-1625 Advanced GEO Earth Ground Tester 83K1725 2369.95FLUKE-1623 Basic GEO Earth Ground Tester 83K1723 1369.95FLUKE-1621 Basic Earth Ground Tester 50M1641 849.95

Kit includes:

Mfg. Part No. Description Stock No. Price EachAMB-6D Digital Insulation Resistance Tester 73C2311 849.95AMB-45 Digital Insulation Resistance Tester 50H8694 474.95

AMB-5KVD DIGITAL MEGATEST 5000

DIGITAL MEGOHMMETER INSULATIONRESISTANCE TESTER

• Fluke-1587 insulation digitalmultimeter

• Fluke-I400 AC current clamp• Fluke-9040 phase rotation indicator• Test probes, test leads and alligator

test clips• Durable hardside carrying case• Documentation and users manuals

(72283)

Mfg. Part No. Description Stock No. Price EachGEO CABLE-REEL 50M Ground/Earth Cable Reel of Wire, 50M 66K7435 65.00EI-162BN Split Core Transformer, 12.7″ 83K1712 1825.00

Mfg. Part No. Description Stock No. Price EachEI-1623 Selective/Stakeless Clamp Set for FLUKE-1623 83K1713 585.95EI-1625 Selective/Stakeless Clamp Set for FLUKE-1625 83K1714 736.95ES-162P3 Earth Stake Set for 3 Pole Measurement 83K1715 221.95ES-162P4 Earth Stake Set for 4 Pole Measurement 83K1716 312.95GEO EARTH STAKE Ground/Earth Stake 66K7436 53.00GEO CABLE-REEL 25M Ground/Earth Cable Reel of Wire, 25M 66K7434 50.00

• Tests insulation of wires, cables, transformersand electrical motors

• Comes as a complete kit including test leads • Selectable test voltages up to 1000V • Programmable timer to perform the Dielectric

Absorption Ratio Test • Sensitive Ohmmeter for checking resistance of

motor windings • Internal memory (stores 9 reading)• Fast and easy to use rugged durable design

• 5000V Digital Insulation Resistance Tester• Tests Insulation of Wire, Cables, Transformers

and Electrical Motors and Generators• Programmable Set-Up of Test Voltages and

Timers• Rugged Durable Design• Performs Dielectric Absorption Ratio Test• Built-In Automatic Voltmeter Up To 5000V Warns

Against Hazardous Energized Systems• Inludes Test Leads and PC Software• One Testing Instrument For Low and High

Voltage Systems

DIGITAL MEGOHMMETER INSULATIONRESISTANCE TESTERS

Mfg. part no. Fluke-1587MDT advanced motor and drive troubleshooting DMM kit contains everything needed forpreventative maintenance and troubleshooting motor and variable frequency drive electrical problems. With mfg. partno. Fluke-1587 digital multimeter, perform insulation tests plus a wide-range of DMM tasks, including resistance,capacitance, temperature, continuity, and frequency measuring, with confidence and ease. Use mfg. part no. FlukeI400 current clamp with mfg. part no. Fluke-1587 DMM to accurately measure AC current without breaking the circuit.Check the rotation of three-phase motors easily and safely with mfg. part no. Fluke-9040 phase rotation indicator.

(88086)

Includes carry case, Test leads complete set and instruction

For each test, mfg. part nos. Fluke 1623 and 1625 earth ground testers inform the user which stakes or clamps need tobe connected. Both models also have an IP56 rating, suitable for outdoor use.

• Tests Insulation of Wire, Cables,Transformers and Electrical Motors

• Fast and Easy to Use, Rugged DurableDesign

• Programmable Timer to Perform DielectricAbsorption Ratio Test

• Selectable Test Voltages Up to 1000V• Sensitive Ohmmeter for Checking

Resistance of Motor Windings• Automatic Voltmeter Warns Against

Hazardous Energized Systems (AMB-6D)• Build-In Voltmeter (AMB-45)• Internal Memory (AMB-45)• Includes Test Leads and PC Software• Safety CAT III 250V (AMB-6D), CAT III

600V (AMB-45) AMB-6D

FLUKE-1625 Kit FLUKE-1623

AMB-45

FEATURES AT A GLANCE

ACCESSORIESMfg. part nos. EI-1623 and EI-1625 clamp sets include one inducing clamp, one measuring clamp and necessarycable and adapters. Mfg. part no. EI-162BN clamps around power pylon legs to perform selective tests. Mfg. part nos.ES-162P3 and ES-162P4 earth stake sets work with both mfg. part nos. Fluke-1623 and Fluke-1625 GEO testers alsoworks with mfg. part no. Fluke-1621. Mfg. part no. ES162P3 set includes three earth stakes, one 25m reel and one50m reel of wire. Mfg. part no. ES162P4 set includes four earth stakes, two 25m reels and one 50m reel of wire. NOTE:the GEO Cable-Reels of wire are terminated on both ends; one end to plug into tester and the other to clip to the stakes.

Mfg. part no. Fluke-1621 basic tester comes with test leads, one 9V battery, manual and protective holster best usedwith ES-162P3 accessory. Sold separately in table below. Mfg. part no. Fluke-1623 offers an innovative solution, called Stakeless testing, along with additional advancedfeatures to make your earth ground loop resistance testing quicker and easier. Kit comes with mfg. part no. 1623 basicGEO earth ground tester, test leads, four earth ground stakes, three cable reels with wire, two clamps, batteries, manualand hard carrying case. Mfg. part no. Fluke-1625 offers three unique features: Automatic Frequency Control (AFC) to identify existinginterference and choose a measurement frequency to minimize its effect, R* measurement, earthing impedance with55Hz for short circuit current in power distribution systems, and Adjustable Limits for quicker testing. Mfg. part no.Fluke-1625 kit comes with mfg. part no. 1625 advanced GEO ground earth tester, test leads, 4 earth ground stakes, 3cable reels with wire, 2 clamps, batteries, manual and hard carrying case.

FLUKE-1621

FLUKE-162X SERIES GEOEARTH GROUND TESTERS


2230

9


INSULATION & GROUND RESISTANCE TESTERS


AMB-5KVD DIGITAL MEGATEST 5000 (CONT.)

Mfg. Part No. Description Stock No. Price EachMJ15 Analog 5 kV Insulation Tester 70K3429 2360.00

MIT510/2 MIT520/2 MIT1020/2Test Voltages 10 kV X

5 kV X X X2.5 kV X X X1 kV X X X

500 V X X X250 V X X X

10V Steps 50V-1kV, 25V Steps 1kV to 5kV XMeasurements Max resistance 15 TOhms 15 TOhms 35 TOhms

Min resistance 10 kOhms 10 kOhms 10 kOhmsVoltage X X X

Capacitance and time constant X X XLeakage curent X X X

Tests Auto IR X X XPolarization index X X

Step voltage X XDielectric discharge X X

Dielectric absorption ratio X XTimer Timer control X X

Timer display X X XOutput USB X X

RS232 X X

Mfg. Part No.MIT xxx-EN

Industrial Applications

Service and TelcoApplications

SpecialApplications

400 410 420 430 480 481 485 40XINSULATION VOLTAGE RANGE

10-100V Variable (2GΩ - 20GΩ) X50V X X X X X X100V X X X X X X250V X X X X X X500V X X X X X X1000V X X X X X X

PI/DAR TESTINGTimed Testing (30/60 Seconds, 1 min./10 min.

X X X X X X

UPPER INSULATION RESISTANCEInsulation Range GΩ 20 100 200 200 100 200 200 2 - 20Leakage Current Display X X X X X XINS Test Voltage Display X X X X X X X X

CONTINUITY200mA (0.01 to 200Ω) X X X X X X X XVariable Current Limit 200mA/20mA X X X X X X X XFast Buzzer — Selectable Threshold X X X X X X X XK Ohm Range to 999KΩ X X X X X X

VOLTAGELive Circuit Warning @ 50V X X X X XLive Circuit Warning @ 75V X X XDefault Voltmeter X X X X X X X XTRMS Measurement to 600V X X X X X X X X

MEASUREMENT RANGESFrequency 40Hz to 400Hz X X X X X XCapacitance (0.1nF to 10µF) X X X XDistance by Capacitance X XMV/Transducer (0.1V to 19.99V) X X X X X X X X

STORAGEBluetooth Downloading X XStorage Only X X

Mfg. Part No. Description Stock No. Price Each309 Digital Earth Resistance Meter 54M5382 189.00

(89377)

Mfg. Part No. Description Stock No. Price EachMIT510/2 5kV Insulation Resistance Tester 98M0028 3265.00MIT520/2 5kV Insulation Resistance Tester 98M0031 4250.00MIT1020/2 10kV Insulation Resistance Tester 98M0003 5135.00

Mfg. Part No. Description Stock No. Price EachAMB-5KVD 5000V Digital Insulation Resistance Tester 73C6168 2495.00

(101646)

ANALOG 5kVINSULATION TESTER

(89376)

Mfg. Part No. Description Stock No. Price EachMIT400-EN Insulation and Continuity Tester, 20GΩ 84K9406 555.00MIT410-EN Insulation and Continuity Tester, 100GΩ, PI/DAR Testing 84K9407 635.00MIT420-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, Data

Storage84K9408 685.00

MIT430-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, DataStorage, Bluetooth Wireless Data Storage and Downloading

84K9409 780.00

SERVICE AND TELECOM APPLICATIONS — LIVE CIRCUIT WARNING @ 75V

MIT480-EN Insulation and Continuity Tester, 100GΩ 84K9410 610.00MIT481-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, Data

Storage, Distance by Capacitance84K9411 830.00

MIT485-EN Insulation and Continuity Tester, 200GΩ, PI/DAR Testing, DataStorage, Bluetooth Wireless Data Storage and Downloading,Distance by Capacitance

84K9412 930.00

SPECIAL APPLICATIONS — LIVE CIRCUIT WARNING @ 50V

MIT40X-EN Insulation and Continuity Tester, 2 to 20GΩ, Variable 10 to 10VTest Voltage

84K9405 655.00

DIGITAL EARTH/GROUNDRESISTANCE METER

(88602)• Four test voltages to 5 kV• Hand crank or 8AA batteries• Shock mounted analog scale• Voltage range to 600V indicates

auto discharge• Pass/fail overlays for rapid testing

(72284)

• Line supply or battery operated• Digital/Analog backlit display• Automatic insulation resistance tests• 3 mA short circuit current• Rated IP65• Meets EN-61010 for arc-flash

protection• Calibration certificate included

MIT400 SERIES INDUSTRIALINSULATION AND CONTINUITYTESTERS

Mfg. part no. MJ15 is compact, simple to use, quick and accurate. It measures to 20 Gohms, with test voltages 500 V, 1kV, 2.5 kV, or 5 kV. Comes complete with soft carrying case, test lead set, test record cards, and 8AA batteries.

Designed for testing and maintenance of high voltage equipment. All have large, easy to read backlit LCD displays thatshow resistance, voltage, leakage current, capacitance, battery status, and time constant. Elapsed time is displayedconstantly, automatically starting at the beginning of a test. No external timer is needed. The MIT1020/2 allows up to 3timed measurement positions to be set to simplify DAR testing and includes a breakdown and alarm mode where analarm sounds if the resistance is under a preset selectable level.If the instrument is accidentally connected to a live voltage, the voltage will be displayed and testing will be inhibited ifthe voltage exceeds 50V for MIT510/2 and MIT520/2 or 80V for MIT1020/2. At the end of the test, any stored voltage isdischarged and monitored on the display. All models include a guard terminal and a guard test lead, a 3-meter test leadset, and a user guide on CD.

309

MIT430-EN

SPECIFICATIONS

• Measures Earth resistance in 20/200/2000 ohm ranges• Measures Earth ACV to 2000VAC (40 tto 500Hz)• 2mA measuring current measures resistance without tripping

circuit breakers• Data hold• Auto power off

• Insulation testing to 1000V and to 200Gohms• Continuity testing at 200mA down to 0.01ohms • Analog and dual digital display with backlight• Insulation and continuity limit alarms• PI/DAR timer function (except mfg. part nos.

MIT400 and MIT480)• AC/DC Voltage measurement• CATIII 600V or CATIV 600V • Calibration certificate

5kV AND 10kV INSULATIONRESISTANCE TESTERS

Mfg. part no. 309 digital earth resistance meter is a compact, battery-powered portable meter. Includes test leads, auxiliary earth spikes, carryingcase abd batteries.

MIT400 series industrial insulation and continuity testers are designed to meet IEC1010-2 and EN61557, and sealed toIP54. Mfg. part nos. MIT420-EN and MIT481-EN are capable of saving test results for recall to the screen. A simplestorage structure allows for a test number and screen results to be recalled individually. Mfg. part nos. MIT430-EN andMIT485-EN support both test result storage and downloading. Rubber boot combines tough, shock-absorbing outerprotection with an excellent grip, on a strong modified ABS housing. All models are supplied with: test leads — 2 wirelead set to CAT IV 600V, consisting of red and black leads 1.25m complete with probe, red and black crocodile clips,instrument rubber boot, calibration certificate and user manual. Requires six AA batteries (either alkaline or NiMH)rechargeable type, ordered separately; go online or call.

SPECIFICATIONS

INDUSTRIAL APPLICATIONS — LIVE CIRCUIT WARNING @ 50V



9


INSULATION & GROUND RESISTANCE TESTERS • TELEPHONE LINE TEST


308A DIGITAL INSULATION TESTER

307A ANALOG INSULATION TESTER

Mfg. Part No. Description Stock No. Price Each19800003 TS19 Telecom Test Set 48F4962 102.4019800009 TS19 Telecom Test Set with Angled Bed-of-Nails 48F4943 102.40

Mfg. Part No. Description Stock No. Price Each22800-001 TS22 Telecom Test Set Standard Cord 48F4944 260.2722801-001 TS22A Telecom Test Set with Piercing Pin Cord 48F4945 301.3722801-009 TS22A Telecom Test Set with Speaker Phone 48F4946 298.46

SPECIFICATIONS

(148858)

(39374)

(39375)

Mfg. Part No. Stock No.Price Each

1-4093-0005 74M5623 329.58

Mfg. Part No. Description Stock No. Price Each701K Classic Tone Generator and Probe Kit 06C9930 133.1677HP High-Power Tone Generator 07C0056 43.66200EP Standard Inductive Amplifier 06C5591 83.57

Mfg. part no. 308A provides selectable voltage testing of 250V, 500Vor 1000V with resistance to 2000MΩ. 31⁄2-digit LCD. Battery operated.Low resistance test. Includes batteries, integral carrying case w/strap,test leads, and instruction manual.

Mfg. part no. 307A provides selectable voltage testing with250V/50MΩ, 500V/100MΩ, or 1000V/200MΩ ranges. Analog display.Battery operated. Low resistance test. Includes batteries, integralcarrying case w/strap, test leads, and instruction manual.

TS®19 SERIESTELECOM TEST SET

TS®22 SERIESTELECOM TEST SET

(116629)

(62183)

CLASSIC TONEGENERATOR ANDPROBE KIT

SURFACE RESISTANCEMETER

Range Accuracy Resolution200MΩ (500V) ±(3% +1d) 0.1MΩ1000MΩ (1000V) ±(3% +1d) 1MΩ2000Ω ±(3% +1d) 0.1ΩPower DC 12V (8 x 1.5V AA batteries)


1-2307A Analog Insulation Tester 52M2681 222.88


1-2308A Digital Insulation Tester 54M5381 308.00

TS®22 series telecom test set offers an unbeatable combination of reliability, durability and expanded utility. Multiplememories enable storage of nine 18-digit telephone numbers in repertory dialer (speed dialing) for easy access to thetest boards, the CO and other frequently called numbers. The last-number redial feature eliminates the need to re-keyyour last entry. TS®22A series telecom test set’s unique built-in amplified speaker provides 3 audio levels for hands freelistening and use with automated voice response systems.

Mfg. Part No. Description Stock No. Price Each501 5 Test Voltage Insulation Tester 95B9088 1036.58

TS®19 series telecom test set combines all of the basic test set features at an incredible price. Its high-impedancemonitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus providing theintegrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity testbutton and last number redial make this test set the perfect combination of features and price.

Used to identify single conductors or cable within a bundle, at a cross-connect point or at remote ends. Mfg. part no.701K classic tone and probe kit includes: mfg. part no. 77HP high-power tone generator and mfg. part no. 200EPinductive amplifier packaged in a rugged woven polyester carrying case. Order kit replacement components separatelybelow.

(6573)

(6572)

22800-001

• Designed to measure both surface resistance andresistance to ground

• The meter will test conductive, static dissipative andinsulative surfaces

• Decade changeover ± 1/2 decade on a logarithmic scale• Resolution 1 decade • Accuracy ± 1/2 decade • Temperature 4°C to 55°C• Powered by 9V PP3 alkaline battery• Test voltage nominal 9V• Weight 182 grams• Dimensions 128 x 63 x 25mm

Mfg. Part No. Description Stock No. Price 1-472-6782 Digital Insulation Tester 17C6506 148.48

(51479)

INSULATION TESTER

(69132)

DIGITAL INSULATION TESTER

Mfg. part no. 501 insulation tester measures insula-tion resistance with 5 test voltages up to 1000V.Voltmeter to 1000V AC/DC. Test probe signal lampilluminates work area and indicates pass/fail of insula-tion resistance. Includes carrying case, 2 test probes,2 alligator clips and 6 D size batteries. CE compliant.

• Easy-to-Read Display• Wide Measuring Range• Built-In Over-Input and

Low-Battery Indication• Overload Protection on All Ranges• Sensitive Ohm Meter Scale:

0-200Ω for Measuring Low-Resistance Circuits

• Automatic Zero Adjustand Circuit Discharge

• CE Compliant

Compact, easy-to-read, battery-powered digital insulation tester. Includes instruction manual and alligator clips.Batteries not included.


2232

9


TEST LEADS & ACCESSORIES


Mfg. Part No. Description Stock No. Price EachTLK287 Electronics Master Test Lead Set 70M8699 119.55

Mfg. Part No. Description Stock No. Price EachTLK289 Industrial Master Test Lead Set 70M8700 119.55

Mfg. Part No. Description Stock No. Price EachFTP Fused Test Probe Set 09R2352 74.95FTPL Fused Test Probe Set with Test Leads 09R2353 84.95Mfg. Part No. Description Stock No. Price Each

AC220 SureGrip Alligator Clips 81C7979 30.10


MTL-500 Double Insulated Silicon Test Leads, Short Prods, and InsulatedCrocodile Clips, One Pair Each

66K6292 35.95

MTL-501 MTL-500 PLUS USA Mains Socket Test Adapter and Sprung Hooks,One Pair Each

66K6293 59.95

Mfg. Part No. Description Stock No. Price EachTL75 Hard Point™ Test Lead Set 44F622 18.05

(147953)

Mfg. Part No. Description Stock No. Price EachAC285 SureGrip Large Alligator Clips 81C7982 18.05

FTP AND FTPL SUREGRIPFUSED TEST PROBES AND KIT

Mfg. Part No. Description Stock No. Price EachTL71 Premium Test Lead Set 94B7832 21.65

Mfg. Part No. Description Stock No. Price EachAC280 SureGrip Hook Test Clips 81C7980 26.45

(85791)

DMM TEST LEAD KITS

• Built-in fuses for additional measurement protection • Probes allow indication of live voltage even with blown

fuse• 2 mm threaded probe tips include removable 4 mm

lantern-style spring contacts and removable GS38insulated IC caps

• Operating temperature: -20°C to 50°C (-5°F to 120°F) • Rated to CAT III 1000 V, CAT IV 600 V, 10A

Mfg. Part No. Description Stock No. Price EachAC283 SureGrip Pincer Test Clips 81C7981 30.10

Mfg. Part No. Description Stock No. Price EachL210 Probe Light and Probe Extender Kit 82H8219 30.40

MTL-500

Mfg. Part No. Description Stock No. Price EachTP220 SureGrip Industrial Test Probes 81C8008 14.45

Modular FTP probes can mount onto any Fluke modular lead format. FTPL set includes Fluke TL224 modular leads withthe fused test probes. Also include removable sheathed tips for additional safety.

(61081)

TLK287 ELECTRONICTEST LEAD SET

Mfg. Part No. Description Stock No. Price EachTL222 SureGrip Silicone-Insulated Industrial Test

Leads30H0450 22.85

MTL-501

Mfg. Part No. Description Stock No. Price EachTL224 SureGrip Silicone-Insulated Industrial Test

Leads81C8007 22.85

• The TLK287 is TLK287Electronics Master Test Lead Set

• Precision electronic probes withmultiple spring-loaded sharp tipsto maximize contact with SMDtest points

• Micro-grabbers and leads toenable fin SMD test

• Mini-alligator clips, grabbers,and probes for virtually everyelectronics need

Mfg. Part No. Description Stock No. Price EachTL220 SureGrip Industrial Test Lead Set 30H0448 59.10

TLK 289 INDUSTRIAL MASTER TEST LEAD SET

Mfg. Part No. Description Stock No. Price EachTL221 SureGrip Silicone-Insulated Test Lead

Extension Kit30H0449 22.85

• SureGrip™ alligator clips, grabbers, hook clips and industrial test probes for dependable contact with avariety of test points

• Magnetic hanger for convenient suspension of your DMM from a metal surface• Temperature adapter with K-Type thermocouple for direct temperature measurement with your DMM’s

temperature measurement functions• Protective soft case for your DMM and all its accessories

Mfg. Part No. Description Stock No. Price EachTL223 SureGrip Electrical Test Lead Set 26H1655 59.10

TL75 HARD POINT™ TEST LEAD SET

Mfg. Part No. Description Stock No. Price EachTL238 SureGrip High-Energy Test Lead Set 10J8436 58.45

• Set Includes: One Pair (Red, Black) Comfort Grip Probes with PVC Insulated, Leads with Right-Angle,Shrouded Banana Plugs

• Recommended for General-Purpose Measurements• Rating: Dual Safety Rated CAT III 1000V and CAT IV 600V• UL listed

Mfg. Part No. Description Stock No. Price EachFLUKE-TL225 SureGrip Stray Voltage Eliminator Adapter Test

Lead Set26K2570 86.10

TL71 PREMIUM TEST LEAD SET

(74806)

• Set Includes: One Pair (Red, Black) Comfort Grip Probes with Silicone Insulated, Right-Angle Test Leads• Replacement Test Leads for Series 80 IV DMMS• Recommended for µV Measurements• Rating: Category III, 1000V, 10A• UL listed

SUREGRIP™ ACCESSORIES

L210 PROBE LIGHT AND PROBE EXTENDER KIT• Kit Includes Probe Light and Test Probe Extenders• 8″ Probe Keep Hands Away From Live Circuits• Extender Fits Between Modular Test Probe and Test Lead• 120 Hours of Battery Life, Uses 2-3 Volt Watch Batteries

SureGrip™ accessories were designed to provide a reliable grip inslippery hands. Rubber-overmolded surfaces and finger-huggingcurves give the user a comfortable steady hold. For industrial, electricaland electronic environments. Designed for comfort, ergonomic sup-port and durability. Can be used safely in both CAT III and CAT IVsettings (1000V CAT III, 600V CAT V).

TL81A

AC220 SUREGRIP™ ALLIGATOR CLIPS• One Pair (Red, Black) of Small, Insulated, Nickel-Plated Jaws• Blunt Tip Grabs Round Screw Heads Up to 9.5mm

TEST LEAD SETS AND PROBE LIGHT KIT

AC280 SUREGRIP™ HOOK CLIPS• One Pair (Red, Black) of Nickel-Plated Clips• Profile Narrows to 5.6mm at Tip, Hook Opening 6.4mm at Front, 2mm at Base

AC283 SUREGRIP™ PINCER CLIPS• One Pair (Red, Black) of Nickel-Plated Pincers Open to 5mm• 11.4 cm Flexible Insulated Shaft

TP220 SUREGRIP™ INDUSTRIAL TEST PROBES• One Pair (Red, Black) of Industrial Probes• 12mm Stainless Steel Tip Provides Reliable Contact

TL222 SUREGRIP™ SILICONE-INSULATED INDUSTRIAL TEST LEADS• DMM Test Leads (Red, Black) with Safety Shrouded, Standard Diameter Banana Plugs• Right Angle Connector on Both Ends, Reinforced Strain Relief

TL224 SUREGRIP™ SILICONE-INSULATED INDUSTRIAL TEST LEADS• DMM Test Leads (Red, Black) with Safety Shrouded, Standard Diameter Banana Plugs• Right Angle Connector on One End and Straight Connector on the Other• Reinforced Strain Relief 1.5m Silicone-Insulated Wire Resists Heat and Cold

TL220 SUREGRIP™ INDUSTRIAL TEST LEAD SET• Mfg. part no. AC220 SureGrip™ Alligator Clip Set• Mfg. part no. TP220 SureGrip™ Test Probe Set• Mfg. part no. TL222 SureGrip™ Silicone Test Lead Set (Right-to-Right)

TL221 SUREGRIP™ SILICONE-INSULATED TEST LEAD EXTENSION SET• One Pair (Red, Black) of Silicone-Insulated Leads with Straight Connectors on Both Ends• Reinforced Strain Relief• Includes One Pair (Red, Black) of Female Couplers• Extends Test Leads by 1.5m

TL223 SUREGRIP™ ELECTRICAL TEST LEAD SET• Mfg. part no. AC220 SureGrip™ Alligator Clip Set• Mfg. part no. TP1 Slim-Reach™ Test Probes (Flat Bladed)

TL225 SUREGRIP™ STRAY VOLTAGE ELIMINATOR ADAPTER TEST LEAD SET• Mfg. part no. SV225 SureGrip™ Stray Voltage Eliminator • Mfg. part no. TL224 SureGrip™ Silicone Test Lead Set (Right-to-Straight) • Mfg. part no. TP220 SureGrip™ Test Probe Set • Mfg. part no. C75 Accessory Case

AC285 SUREGRIP™ LARGE ALLIGATOR CLIPS• One Pair (Red, Black) of Large Alligator Clips with Nickel-Plated Steel Jaws• Multipurpose Tooth Pattern Grips Anything from Fine Gauge Wire to a 20mm Bolt

TL238 SUREGRIP™ HIGH-ENERGY TEST LEAD SET• Pair Insulated Tip Probes Lessen the Risk of Arc Flash Explosion• Pair 8″ Probe Extenders Keep Hands Away from Live Circuits• Mfg. part no. TL224 SureGrip™ Silicone Test Lead Set (Right-to-Straight)



9




DMM TEST COMPANION™ KITS


1-45677B Deluxe DMM Kit 30C4814 149.71

(5328)


DL243D Basic Test Lead Kit 71M3145 34.95

Mfg. Part No. Fig. Convert From Convert To Color Stock No.Price Each

Each73084-0 1 6-32 Male Terminal Jack Banana Jack Black 08R6366 1.9973084-2 1 6-32 Male Terminal Jack Banana Jack Red 08R6367 1.9973084-4 1 6-32 Male Terminal Jack Banana Jack Yellow 08R6368 1.9973084-6 1 6-32 Male Terminal Jack Banana Jack Blue 08R6369 1.9973088-0 1 8-32 Male Terminal Jack Banana Jack Black 08R6378 1.9973088-2 1 8-32 Male Terminal Jack Banana Jack Red 08R6379 1.9973088-4 1 8-32 Male Terminal Jack Banana Jack Yellow 08R6380 1.9973088-6 1 8-32 Male Terminal Jack Banana Jack Blue 08R6381 1.9973085-0 1 10-32 Male Terminal Jack Banana Jack Black 08R6370 1.9973085-2 1 10-32 Male Terminal Jack Banana Jack Red 08R6371 1.9973085-4 1 10-32 Male Terminal Jack Banana Jack Yellow 08R6372 1.9973085-6 1 10-32 Male Terminal Jack Banana Jack Blue 08R6373 1.9973086-0 2 10-32 Female Terminal Jack Banana Jack Black 08R6374 1.9973086-2 2 10-32 Female Terminal Jack Banana Jack Red 08R6375 1.99

6172A

(147136)

DELUXE DMM TESTMAXI KIT

BASIC TESTLEAD KIT

Mfg. part no. 5677 is ideal for Test and Measurement Scenarios using DMM’s. Includes silicone insulated 4ft (1.2m)leads with right angle plug, modular probe set with replaceable tips, replacement tips set, Retractable tip test probe set,test lead coupler set, medium alligator clip set, large alligator clip set, spade lugs, IC probe tip adapter, Minigrabber® testclip leads, Minipincer® test clip leads, and Nylon storage pouch.

TERMINAL JACK-TO-BANANAJACK ADAPTERS

6173A

• Silicone lead wires, 48” long, redand black

• Standard probe tips, red and black • Alligator clips, red and black • Spade lugs, red and black • Carry case with pockets and

VELCRO® closure • EN61010-2-03, CE safety approved


1-9 5910B Test Clip Set with Pincer 73K9952 30.67 5911B Test Clip Set with Hook 73K9953 23.42 5912B Test Clip Set with Jaws 73K9954 32.81 5913 Insulation Piercing Test Clip Set 95F1295 53.66

• Provides banana jack connection by replacing the screw in a terminal strip or control panel• Allows a standard sheathed or unsheathed banana plug / patch cord to securely connect to a terminal strip• Helps to avoid accidental arc-over by eliminating the usage of alligator clips, or test probe “slip offs” during

measurement applications• Perfect for use with model 73087 jumper test lead sets in peer-checking system test sequences• Nickel-plated brass banana jacks with polypropylene V-2 insulation

(42174)

Fig. 1

MAXIGRABBER® TEST CLIP SETS

6174

Rated to IEC 1010-2-031 CATIII 1000V, 10A (except mfg. part no. 5913, IEC 1010-2-031 CAT III 1000V 5A). Each setcontains one black and one red clip.

Fig. 2

5913

6175

5910B 5911B

Cordura Carrying CaseDMM Test Companion™ kits are specifically designed to accompany Fluke 80 series DMM’s and other DMM’s withsafety inputs. Four professional grade kits have been created to provide tools to match your needs in the field. Each kitcomes with a shoulder-pack style Cordura carrying case with shoulder strap. Cases are weather resistant and aredesigned with extra padding to hold an protect instruments. These cases also have several compartments designed tohold accessories, tools, batteries, and documentation.

5912B

Mfg. part no. 6172A includes a medium alligator clip set, 2 spade lug adapters, 2 pincer tip test clips, 2 hook tip testclips, 2 banana tip modular test probes, 2 48″ (1.2m) modular test leads and 2 48″ (1.2mm) stainless steel tip test leads.Includes Condura Carrying Case.

Mfg. part nos. 5910B, 5911B and 5912B feature a long shaft that is ideal for electronic, electrical and industrialapplications where access to hard to reach high voltage test points is a requirement. Safety sheathed jack mates toPomona’s 5907A, 5908A and 5909A flexible test leads for digital multi-meter interfacing. Mfg. part no. 5910B pincercan securely grab a 0.16″ (4mm) max. O.D. terminal post. Mfg. part no. 5912B clip jaws securely grip wires and testpoints for solid contact with conductors.

Mfg. part no. 6173A includes a medium alligator clip set, large alligator clip set, 2 spade lug adapters, 2 jaw tip testclips, 2 pincer tip test clips, 2 hook tip test clips, 2 banana tip modular test probes, 2 48″ (1.2m) modular test leads and 248″ (1.2mm) stainless steel tip test leads. Includes Condura Carrying Case.

Mfg. part no. 5913 pierces wire up to 0.14″ diameter and is for use with 23-16 AWG wire. Compatible with all Pomonabanana plug leads. Sheathed 4mm receptacle accepts shrouded and unshrouded banana plugs.

Mfg. part no. 6174 includes a medium alligator clip set, flexible test lead set, Minigrabber® test set, extended tip, IC testtip adapter, spade lug with jack, Micrograbber® test clip-to-pop jack, SMD Grabber ® test clip-to-pop jack, and SMD testtweezer-to-sheathed banana plugs. Includes Cordura Carrying Case.Mfg. part no. 6175 includes a medium alligator clip set, flexible test lead set, Minigrabber® test clip, extended tip, IC testtip adapter, assorted replacement tips, Minipincer® test clip set, spade lug with jack, Micrograbber® test clip-to-popjack, SMD grabber test clip-to-pop jack, SMD test tweezer-to-sheathed banana plugs, and test probes with replacementtip. Includes Cordura Carrying Case.


1-4 6172A Industrial Digital Multimeter Test Kit 73K9972 135.80 6173A Deluxe Digital Multimeter Test Kit 73K6638 186.66

6174 Electronic Digital Multimeter Test Kit 48F1174 173.456175 Digital Multimeter Test Kit 48F1175 203.73

(5394)


2234

9




TERMINAL JACK-TO-BANANA JACK ADAPTERS (CONT.)

(148831)


1-24 5519A CAT III 1000V, UL 90F2354 18.65 5517A 30VAC, 60VDC 90F2362 29.06 5898 CAT III 1000V, UL 95F1303 19.20 6262-02 Fine Point Extended Adapter for Pomona DMM Test Probes 30C4846 19.18


1-45674C Electronic Digital Multimeter Kit 73K9941 171.70


1-9 5325A Basic Electronic DMM Test Lead Kit 94F1526 22.97


1-9 6341 Probe Kit with Tip Set and Case 51B961 47.28 6342 Probe Set with Gold-Plated Tips 91B0558 27.30 6275 Probe Set with Stainless Steel Tips 91B1291 23.96 6601 Probe Set with Removable 4mm Banana Plug Adapter 82H6149 23.52

(61176)


1-9 5906A Test Probe Handle Set 95F1302 14.80

(9154)

(65379)


1-4 5900A/POM Basic Electrical Digital Multimeter Kit 73K9949 68.65

(61182)

Mfg. Part No. Fig. Convert From Convert To Color Stock No.Price Each

Each73086-4 2 10-32 Female Terminal Jack Banana Jack Yellow 08R6376 1.9973086-6 2 10-32 Female Terminal Jack Banana Jack Blue 08R6377 1.99

DELUXEELECTRONICDMM KIT

• Ideal for Probing Fine Pitch ICLeads and Densely Packed PCBoards

• Slim Design Tip Enables aFirm Grip and Access IntoTight Spots

• Rating: 1000V, 3A Max.

(61180)

Nickel plated brass tip offers high conductivity for precision measurements. Contains 2 each test probe leads andalligator clips, one black, one red. Also includes two pieces of dogleg micro tips. Supplied in a reusable plastic pouch.


1-9 5907A Right-Angle Sheathed Banana Plug 95F1291 18.27 5908A Straight Sheathed Banana Plug To

Straight Shreathed Banana Plug48F1708 18.27

5909-A Straight Sheathed Banana Plug 95F1293 17.75 6358 Straight DMM Plug To Retractable Sheath Plug 96B9220 20.77

REPLACEMENTTEST PROBE KITS

(5399)

Mfg. part no. 5519A kit has general-purpose replacement leads with standard 0.080 tip. Fit most meters from Fluke,Wavetek (Meterman), HP (Agilent), Tektronix, Amprobe and many others. Mfg. part no. 5517A leads fit Simpson mfg.part no. 260 meters with pin-type input jacks. Mfg. part no. 5898 leads have stainless-steel tips for penetratingcorroded or oxidized test points. All leads have 4′ silicone insulated wires.

Designed for electronic DMM testing scenarios. Includes silicone insulated 4 ft (1.2m) leads with right angle plug,modular probe set with standard tips, extended probe tip adapters, medium alligator clips, IC probe tip adapters,Minigrabber® test clip leads, Minipincer® test clip leads, Maxigrabber® test clips with pincer tip, and nylon storagepouch. Insulated 4ft (1.2m) test leads with right-angle DMM plugs fit most meters from Fluke, HP, Wavetek (Meterman),and others.

BASIC ELECTRICAL DMM KIT

(147910)

Ideal for probing fine pitch IC leads and densely packed PC Boards. Slim design tip enable firm grip and access into tightspots. Rated to IEC 1010-2-031 CAT III 1000V, 3A Max. Compact and ergonomic, these high precision probes fit mostDMM’s. Note: Mfg. part no. 6341 includes a set of 5 0.040” dia. Stainless steel and gold-plated replacement tips.

BASIC ELECTRONICDMM TEST LEAD KIT

5906A TEST PROBE HANDLE SET

Basic test lead kit contains a set of modular test probesand 4’ silicone insulated test leads. The set of Maxigrab-ber® test clips attach to the leads in place of the probes.Supplied with a convenient carry pouch. IEC1010-2-031CAT III 1000V. UL listed.

6275

Mfg. part no. 5906A set contains test probe handle with brass caged banana plug tip and sheathed 0.158″ (4) bananajack in handle. Set contains one black, one red probe rated CAT III 1000V, 10A. Mfg. part no. 6232 similar to mfg. partno. 5906A except .080 notch tip.

PRECISION ELECTRONICPROBE SETS AND KITS

FLEXIBLE TEST LEAD SETS

Set fit Fluke, HP, Tektronix, and Wavetek brand-multimeters. Rated CAT III 1000V. One black, one red lead. 48″ longhigh-temperature silicone wire. Mfg. part no. 5907A right-angle sheathed banana plug to straight sheathed bananaplug. Mfg. part no. 5908A straight sheathed banana plug each end. Mfg. part no. 5909A right-angle sheathed bananaplug each end.

5907A

REPLACEMENTMODULAR TESTLEADS ANDPROBES



9




(148859)

Mfg. Part No. Fig. Plug Type Stock No.Price Each

1-9 10-24 25-49 50+5952A 1 Stacking Banana 35C4345 30.45 27.13 26.02 24.64

5953A 2 Multimeter 29C9527 30.45 27.13 26.02 24.64REPLACEABLE TIP PROBES TO BANANA PLUGS

5950A 3 In-Line Banana 30C4823 30.45 27.13 26.02 24.645951A 4 Right-Angle Banana 30C4824 30.45 27.13 26.02 24.64

(8970)

EXTENDABLE TIP PROBES

Mfg. Part No. L Color Stock No.

Price Each

1-24 25-49 50-99100-249

P-4-0 4″ Black 06M7552 7.57 7.26 7.10 6.57 P-4-2 4″ Red 06M7553 7.57 7.26 7.10 6.57 P-8-0 8″ Black 06M7554 7.74 7.42 7.26 6.71 P-8-2 8″ Red 06M7555 7.74 7.42 7.26 6.71 P-12-0 12″ Black 06M7546 7.74 7.42 7.26 6.71 P-12-2 12″ Red 06M7547 7.74 7.42 7.26 6.71 P-24-0 24″ Black 06M7548 8.05 7.72 7.55 6.98 P-24-2 24″ Red 06M7549 8.05 7.72 7.55 6.98 P-36-0 36″ Black 06M7550 8.20 7.86 7.69 7.11 P-36-2 36″ Red 06M7551 8.20 7.86 7.69 7.11

STACKING STANDARD BANANA PLUG EACH END — FIG. 218 AWG. 5000VDC, 15A, +55°C.

B-4-0 4″ Black 06M6942 6.22 5.96 5.83 5.40 B-4-2 4″ Red 06M6943 6.22 5.96 5.83 5.40 B-8-0 8″ Black 06M6951 6.37 6.10 5.97 5.52 B-8-2 8″ Red 06M6952 6.37 6.10 5.97 5.52 B-12-0 12″ Black 34F880 6.37 6.10 5.97 5.52 B-12-2 12″ Red 34F879 6.37 6.10 5.97 5.52 B-12-6 12″ Blue 96F7092 6.37 6.10 5.97 5.52 B-12-9 12″ White 84F885 6.37 6.10 5.97 5.52 B-18-0 18″ Black 34F882 6.54 6.26 6.13 5.67 B-18-2 18″ Red 34F881 6.54 6.26 6.13 5.67 B-18-6 18″ Blue 70B7185 6.54 6.26 6.13 5.67 B-18-9 18″ White 94F284 6.54 6.26 6.13 5.67 B-24-0 24″ Black 34F849 6.68 6.40 6.26 5.79 B-24-2 24″ Red 34F848 6.68 6.40 6.26 5.79 B-24-8 24″ Gray 96B8428 6.68 6.40 6.26 5.79 B-36-0 36″ Black 34F851 6.68 6.40 6.26 5.79 B-36-2 36″ Red 34F850 6.68 6.40 6.26 5.79 B-36-8 36″ Gray 70B4665 6.68 6.40 6.26 5.79 B-48-4 48″ Yellow 91B3621 6.82 6.54 6.40 5.92 B-60-9 60″ White 92B0840 6.97 6.68 6.54 6.04 B-72-3 72″ Orange 50B6691 7.11 6.82 6.67 6.17 B-72-4 72″ Yellow 50B6692 7.11 6.82 6.67 6.17 B-72-5 72″ Green 50B6693 7.11 6.82 6.67 6.17 B-72-6 72″ Blue 50B6694 7.11 6.82 6.67 6.17 B-72-8 72″ Gray 50B6696 7.07 6.77 6.63 6.13 B-72-9 72″ White 50B6697 7.11 6.82 6.67 6.17 2948-12-0 12″ Black 90B3695 8.78 7.93 7.65 7.46 2948-36-0 36″ Black 10M4226 11.38 10.91 10.67 9.87 2948-36-2 36″ Red 10M4227 11.38 10.91 10.67 9.87

INSULATED ALLIGATOR CLIP EACH END — FIG. 318 AWG. 150V, 5A, +50°C.

AL-B-12-0 12″ Black 06M6923 7.11 6.82 6.67 6.17 AL-B-12-2 12″ Red 06M6924 7.11 6.82 6.67 6.17 AL-B-24-0 24″ Black 06M6925 7.43 7.12 6.96 6.44 AL-B-24-2 24″ Red 06M6926 7.43 7.12 6.96 6.44 AL-B-36-0 36″ Black 06M6927 7.57 7.26 7.10 6.57 AL-B-36-2 36″ Red 06M6928 7.57 7.26 7.10 6.57 AL-B-60-2 5ft Red 78B1539 8.80 8.44 8.25 7.63

MINIGATOR CLIP TO STACKING BANANA PLUG — FIG. 420 AWG. 45V, 5A, +50°C.

3220-36-0 36″ Black 10M4234 6.97 6.68 6.54 6.04 3220-36-2 36″ Red 10M4235 6.97 6.68 6.54 6.04

TEST PROBE SETS

Mfg. Part No. Fig. Description Stock No.Price Each

1-24 25-49 50-99 3788 1 Female BNC to 2 Minigrabber™ Clips 35F1061 14.46 13.02 12.59 3789 ... Male BNC to 2 Minigrabber™ Clips 35F975 17.82 16.06 15.52 5305 2 Female BNC to 2 SMD Grabber Clips 46F2415 19.72 17.77 17.17 2630 3 Female BNC to 2 Alligator Clips 10M4222 14.90 13.42 12.97 2631 3 Female BNC to 2 Minigator Clips 10M4223 14.90 13.42 12.97 3221 ... Female BNC to Stacking Pin Tip Plugs 10M4236 17.98 16.20 15.66 3901 4 Male BNC to Stacking Pin Tip Plugs 77B2426 22.37 20.15 19.48 3073 5 Female BNC to Stacking Banana Plugs 10M4233 13.88 12.50 12.08 4969 6 Female BNC with 20 AWG leads 94F1506 9.77 8.80 8.51 4970 ... Male BNC with 20 AWG leads 94F1507 13.44 12.11 11.70 3957 7 Male BNC to Multistacking Banana Plug 94F1581 20.16 18.17 17.56 5188 8 Female BNC to Micrograbber™ Clips 90F1316 18.96 17.08 16.51

Fig. 1

PATCH CORDS

(8975)

Fig. 2

STACKING PIN TIP PLUG EACH END — FIG. 10.080″ (2.03) O.D. pin tip. 20 AWG. 3000VDC, 5A, +55°C.

MOLDED BREAKOUTS

Fig. 3 Fig. 4

Pomona has made it easy for you to get exactly what you need with a huge selection of patch cords and test leadsdesigned for reliable, convenient connections.

Breakouts convert coaxial cable with BNC male or female connectors to test cable with choice of one black and one redclips or plugs. Tarnish-resistant, plated-brass BNC with gold-plated copper contact. Overall length: 7.0″. Mfg. part nos.4969, 4970, 3221, 3957 and 3073 rated 500Vrms; mfg. part nos. 3788 and 3789 rated 300Vrms; mfg. part nos.5188, 5305 and 2630 rated 150Vrms; mfg. part no. 2631 rated 45Vrms.

Fig. 1Mfg. part nos. 5952A and 5953A probes have tip that extends to 3.00″ (76.20) for hard-to-reach points. Mfg. part nos.5950A and 5951A probes have replaceable .080″ (2.03) O.D. stainless steel tip. Probes connected by 48″ (1.22M) 18AWG, 0.144″ (3.66) O.D. PVC wire. 1 black, 1 red probe.

Fig. 8

Fig. 2

Fig. 4

Fig. 3

Fig. 7

Fig. 1

Fig. 4 Fig. 5 Fig. 6


2236

9




PATCH CORDS (CONT.)

(148860)

Mfg. Part No. Color Fits Cable No. of Slots Stock No.Price Each

1-24 25-49 50-991508 Orange 0.210″ 14 34F956 16.15 14.63 14.154408 Black 0.320″ 10 34F1017 13.20 11.96 11.572708 Blue 0.450″ 9 34F957 16.17 14.65 14.17

(8976)


1-4 5-9 10+ 5523 Minigrabber® Type 3781-24 90F2175 51.91 49.04 45.21 5525 Micrograbber® Type 4613-24 90F2173 82.01 77.47 71.43 5521 SMD Grabber® Type 5301-24 90F2333 107.51 101.56 93.63

Mfg. Part No. L Stock No.Price Each

1-9 10-24 25-49 50+ 1368-A-18 18″ 10M4167 36.51 32.18 31.54 30.74 1368-A-36 36″ 10M4168 36.51 32.18 31.54 30.74 1368-A-48 48″ 89F403 36.51 32.18 31.54 30.74 1368-A-60 60″ 94F294 36.51 32.18 31.54 30.74

TEST LEAD ACCESSORIES

(9039)

File patch cords and cable assemblies for easyselection. Mount on any vertical surface. Coldrolled steel with baked enamel finish.

(8912)

Mfg. Part No. Color Wire O.D. Stock No.Price Each

1-24 25-49 50-99 100+ 3925-0* Black 0.090″ (2.29) 73C4848 18.84 17.84 16.84 16.04 3925-2* Red 0.090″ (2.29) 20H0137 18.84 17.84 16.84 16.04 3925-4* Yellow 0.090″ (2.29) 30F1406 18.84 17.84 16.84 16.04 3925-5* Green 0.090″ (2.29) 94F1578 18.84 17.84 16.84 16.04 3925-9* White 0.090″ (2.29) 94F1580 18.84 17.84 16.84 16.04 4555-0* Black 0.144″ (3.66) 48F5004 20.63 19.53 18.43 17.56 4555-2* Red 0.144″ (3.66) 48F5005 20.63 19.53 18.43 17.56


1-24 25-49 50-99 100+ 4233-0* Black Test Clip 48F5003 22.04 20.25 18.23 17.39 4233-2* Red Test Clip 13H6565 22.04 20.25 18.23 17.39


1-24 25-49 50-99 100+ 4176-02 1 Black, 1 Red Mfg. part no. 3925 Clip 46F2201 4.40 4.17 3.94 3.75 5522 10 Mfg. part no. 3925 Clips, 1 each:

Black, Red, Brown, Orange, Yellow, Green, Blue, Violet, Gray, White

90F2174 21.25 20.12 18.99 18.08

TEST CLIP-TO-TESTCLIP PATCH CORD KITS

BANANA PLUGS/DUALBANANA PLUGS

Rating: 300Vrms +50°C.

Mfg. Part No. Color Stock No.Price Each

1-24 25-49 50-99 100+ 4723-0 Black 46F2380 5.68 5.38 5.08 4.84 4723-2 Red 46F2381 5.68 5.38 5.08 4.84

Each kit contains ten patch cords, 24″ (0.610M) long, with grabber test clips on each end of patch cord. Patch cordsavailable in ten colors: black, red, brown, orange, yellow, green, blue, violet, gray and white. Mfg. part no. 5523 rated300V, 5A; mfg. part nos. 5525 and 5521 rated 150V, 0.5A.


1-24 25-49 50-99 100+ 4521-0 Black Test Clip 35F1691 3.85 3.54 3.19 3.04 4521-2 Red Test Clip 35F1692 3.85 3.54 3.19 3.04

(8964)


1-24 25-49 50-99 100+ 5790-0 Black Test Clip 95F1351 7.92 7.28 6.55 6.25 5790-2 Red Test Clip 95F1352 7.92 7.28 6.55 6.25

MFG. PART NO. 3925 MINIGRABBER TEST CLIP KITS

Mfg. Part No. L Color Stock No.

Price Each

1-24 25-49 50-99100-249

18 AWG. 5000VDC, 15A, +55°C.

4702-24-0 24″ Black 10M4345 8.80 8.44 8.25 7.63 4702-24-2 24″ Red 10M4346 8.80 8.44 8.25 7.63 4702-36-0 36″ Black 10M4347 8.95 8.57 8.39 7.76 4702-36-2 36″ Red 10M4348 8.95 8.57 8.39 7.76

EXTENSION STACKING BANANA PLUG EACH END — FIG. 6Insulates hot leads. 0.144″ (3.66) O.D. 18 AWG. 5000VDC, 15A, +55°C. Other sizes available, go online or call.

HB-36-0 36″ Black 06M7324 13.50 12.94 12.66 11.71 HB-36-2 36″ Red 06M7325 13.50 12.94 12.66 11.71 HB-60-0 60″ Black 06M7328 13.08 11.98 11.10 10.28 HB-60-2 60″ Red 81F4626 13.31 12.75 12.48 11.54

(8966)

(8971)

MICROGRABBER®

TEST CLIPS AND KIT

MINIGRABBER® TESTCLIPS AND KITS

MFG. PART NO. 4233 MICROGRABBER TEST CLIPS AND KIT

Feature plunger-action clip with gold-plated contact hook that attaches to component leads, terminals. No sharp teeth todamage wires. Fingertip operation. 0.625″ (15.88) diameter. +102°C.

Rated 1000WVDC, 3A, +102°C. Accept 0.090″ (2.29) maximum wire O.D. 1.71″ (43.43)L.

MFG. PART NOS. 3925 AND 4555 MINIGRABBER TEST CLIPS

MFG. PART NO. 4521 MICROGRABBER TEST CLIPS WITH 0.025″ SQUARE PIN

Rated 3000WVDC, 12A, 2.54″ (64.52)L, +102°C.

MFG. PART NO. 4723 MINIGRABBER TEST CLIPS WITH BANANA JACK

Have 0.025″ (0.635) square pin within 0.15″ (3.81) square access hole. 1.73″ (43.94) long. Rated 45VAC, 3A, +102°C.

Nickel-plate brass standard banana jack in plunger directly connects test clip to banana plug patch cord. 45VAC, 5A.+102°C.

MFG. PART NO. 5790 ROTATING MICROGRABBER TEST CLIPSIdeal for testing surface mount devices. High-density leads have 0.050″ (1.27) spacing and 0.004″ (0.101) gauge wires.2 access entries with 0.025″ (0.635) square pins.

*Sold in packages of 10

*Sold in Package of 10; +Each.

3925

4233

4723

4521 5790



9




LOW EMF PATCH CORDS (CONT.)

Mfg. Part No. Cable Length Stock No.Price Each

1-9 6510-V-12-0 12″ 30C5088 24.42 6510-V-24-0 24″ 30C5089 24.42 6510-V-36-0 36″ 30C5090 24.42 6510-V-48-0 48″ 30C5091 29.37 6510-V-60-0 60″ 30C5092 29.37

(68987)

TRUE 75Ω BNC MALE CABLES

Mfg. Part No. DescriptionLgth.(in.) Stock No.

PriceEach1-24

5291A-60-0 Retractable Sheath Banana, Black 5 95B0991 19.20 5291A-60-2 Retractable Sheath Banana, Red 5 95B0997 19.20 5295-36-0 Retractable Sheath Banana Plug to Spade Lug, Black 3 94F5215 17.87 5295-36-2 Retractable Sheath Banana Plug to Spade Lug, Red 3 94F5216 17.87

Mfg. Part No. DescriptionLgth.(in.) Stock No.

PriceEach1-24

1693-36-0 Spade Lug Patch Cord, Black 3 51B931 19.20 1693-36-2 Spade Lug Patch Cord, Red 3 51B932 19.20 1693-60-0 Spade Lug Patch Cord, Black 5 98F961 18.62 1693-60-2 Spade Lug Patch Cord, Red 5 94F296 18.62 1756-48 Shielded Spade Lug Patch Cord 4 77B1776 47.11

(84757)

Rating: 500Vrms +50°C.

• BNC Connectors are Perfectly Matched to75Ω Impedance for Superior VSWR andReturn Loss Performance

• Ideal for Digital Video andTelecommunications Applications

• Cable Type: High-Flex, Multistrand CenterConductor, RG59 Type, Black

Mfg. Part No. Fig. Color Fits Cable Stock No.Price Each

1-24 5155-0+ 1 Black RG 58, 141 48F5006 8.99 5156-0+ 1 Black RG 59, 62, 210 20H0126 8.79 5076-0* 2 Black RG 58, 141 44F5342 4.47

Mfg. Part No. Cable Length (in.) Stock No.Price Each

1-4 5-9 10+ 4935-BB-24 24 77B4084 59.48 55.44 51.40 4935-BB-48 48 10M4376 59.48 55.44 51.40 4935-BB-60 60 10M4377 59.48 55.44 51.40

TYPE ’N’ MALE, EACH END 50 OHM CABLE — FIG. 2

1658-T-36 36 77B2158 80.23 74.79 69.34 1658-T-60 60 77B2160 106.09 98.89 91.69

MULTI-STACKING DOUBLE BANANA PLUG, ONE END ONLY - FIG 3

1326-A-60 60 96F7101 20.18 18.81 17.44TWO CONDUCTOR SHIELDED BALANCED LINE — FIG 4

1167-36 36 10M4160 45.18 42.11 39.04TRIAXIAL 3 LUG MALE TRIAXIAL CABLE — FIG 5

5223-36 36 94F5207 123.70 115.30 106.91TRIAXIAL 2 LUG MALE TRIAXIAL CABLE — FIG 5

5054-36 36 78B1833 123.70 115.30 106.91 5054-60 60 78B1834 131.63 122.70 113.76

LOW EMF PATCH CORDS

(8969)

Mfg. Part No. Fig. DescriptionContact

Diameter Amps Stock No.Price Each

1-24 4690-0 3 Black Socket 0.030″ 5.0 81F4641 4.49 4690-2 3 Red Socket 0.030″ 5.0 81F4649 4.49 4691-0 4 Black Pin 0.030″ 5.0 81F4642 4.49 4691-2 4 Red Pin 0.030″ 5.0 81F4650 4.49 3560-0 3 Black Socket 0.040″ 7.5 81F4643 4.38 3560-2 3 Red Socket 0.040″ 7.5 81F4651 4.38 3561-0 4 Black Pin 0.040″ 7.5 81F4644 4.38 3561-2 4 Red Pin 0.040″ 7.5 81F4652 4.38 3562-0 3 Black Socket 0.063″ 13.0 81F4645 4.38 3562-2 3 Red Socket 0.063″ 13.0 81F4653 4.38 3563-0 4 Black Pin 0.063″ 13.0 81F4646 4.38 3563-2 4 Red Pin 0.063″ 13.0 81F4654 4.38 3564-0 3 Black Socket 0.093″ 23.0 81F4647 6.87 3564-2 3 Red Socket 0.093″ 23.0 81F4655 6.87 3565-0 4 Black Pin 0.093″ 23.0 81F4648 4.49 3565-2 4 Red Pin 0.093″ 23.0 81F4656 4.49

All products have 12 AWG wire. Spade Lug are gold plated Electrolytic Tough Pitch (ETP) 110 Copper Alloy, 1⁄2 hard.Banana plug bodies are gold plated tellurium copper; Spring are gold-plated beryllium copper. Rated up to 1000V perIEC1010-2-031, 7A, +131°F (+55°C). The 1693 and 1756 series Rating: Hands free testing in controlled voltageenvironment: 2000 Vdc; Not intended for hand held use at voltages above 33 Vrms/70 Vdc, 20A, +131°F (+55°C) max.The 5291 series Rating: up to 1000V per IEC1010-2-031, 7A, +131°F (+55°C). The 5295 series Rating: Hands freetesting in controlled voltage environment up to 1000V; Not intended for hand held use at voltages above 33 Vrms/70 Vdc,7A, +131°F (+55°C) max.

1693-36-0

BNC MALE TO SMA MALE INSULATED CABLE — FIG. 1

Mfg. Part No. Fig Description Stock No.Price Each

1-24 122505A 5 4mm Banana Plug for 18AWG Wire, Black 99F7945 4.84 122506A 5 4mm Banana Plug for 18AWG Wire, Red 02B1440 4.84

IN-LINE BANANA PLUG

6383-0 ... User Installed In-Line Banana Plug, Black 32H5245 26.48 6383-2 ... User Installed In-Line Banana Plug, Red 57H6847 26.48

IN-LINE BANANA JACK

6384-0 ... User Installed In-Line Banana Jack, Black 35H7046 28.09

CABLE ASSEMBLIES

(43070)

5291A-12-2

TEST LEAD ACCESSORIES

5295-36-0

Rating: 335Vrms. Cable Type: RG316/U. 0.98″ O.D.

MOLDED PVC STRESS RELIEF BOOTS

Fig. 1 Fig. 2

Protects cable 0.185-0.2.00″ (4.70-5.08) outer diameter except (*) which fit 0.237-0.247″ (6.02-6.27) outer diameter.

Fig. 3

CONNECTOR TEST ADAPTERS

Fig. 4

For rapid testing of hard-to-reach contacts of multi-pin and socket rack or panel connectors. 2500 WVDC, +50°C.

RETRACTABLE SLEEVE BANANA PLUGS

Fig. 5

* Each; +Sold in Packages of 10.

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Fig. 5


2238

9





1-46303 Kelvin Probes 03C3869 119.07

Mfg. Part No. Length (in) Stock No.Price Each

1-9 10-24 25-49 50+ 2249-C-6 6 91B6405 19.94 17.56 17.38 16.76 2249-C-12 12 35F1072 19.94 17.56 17.38 16.76 2249-C-24 24 35F1073 19.94 17.56 17.38 16.76 2249-C-36 36 35F1074 19.94 17.56 17.38 16.76 2249-C-48 48 35F1075 25.07 22.07 21.85 21.08 2249-C-60 60 35F1076 25.07 22.07 21.85 21.08 2249-C-72 72 89F333 25.07 22.07 21.85 21.08 2249-C-120 120 89F332 29.90 26.33 26.07 25.14 2249-C-180 180 89F331 36.19 31.86 31.54 30.42 2249-C-300 300 88F6303 49.27 43.39 42.95 41.42 2249-C-600 600 88F6302 72.37 63.72 63.08 60.84 2249-E-12 12 35F1077 21.36 18.81 18.62 17.96 2249-E-24 24 35F1078 21.36 18.81 18.62 17.96 2249-E-36 36 35F1079 21.36 18.81 18.62 17.96 2249-E-48 48 35F1080 25.20 22.19 21.97 21.19 2249-E-60 60 35F1081 25.20 22.19 21.97 21.19 2249-E-72 72 50F1471 25.07 22.07 21.85 21.08 2249-E-120 120 14C7842 30.20 26.59 26.32 25.39 2249-E-180 180 98F7840 36.19 31.86 31.54 30.42 2249-E-240 240 51B934 42.74 37.63 37.26 35.93 2249-E-300 300 97B2360 49.41 43.51 43.07 41.54 4964-SS-24 24 89F334 26.24 23.10 22.87 22.06 4964-SS-36 36 89F328 27.01 23.78 23.55 22.71 4964-SS-48 48 89F329 32.48 28.60 28.31 27.31 4964-SS-60 60 89F330 31.92 28.11 27.83 26.84 4964-SS-240 20 50B6750 48.37 42.59 42.16 40.66

BNC RIGHT ANGLE EACH END CABLE ASSEMBLIES

4276-C-12 1 94F5162 49.09 43.23 42.79 41.27


1-4 5940 Kelvin Clips Set for 4-Wire Resistive Measurement 95F1364 217.42

Mfg. Part No. Pins Stock No.Price Each

1-24 25-49 5250 8 46F2416 14.24 12.98 5251 14 46F2417 14.24 12.98 5252 16 46F2418 16.01 14.60 5253 20 46F2419 18.55 16.92 5254 24 46F2420 27.04 24.66 5437 28 89F422 32.85 29.96

Mfg. Part No. L Stock No.Price Each

1-24 25-49 50-99 100+ BNC-C-18 18″ 30F1417 23.38 21.04 20.42 19.81 BNC-C-24 24″ 34F842 23.38 21.04 20.42 19.81 BNC-C-36 36″ 34F843 23.38 21.04 20.42 19.81 BNC-C-48 48″ 44F2636 26.41 23.76 23.06 22.37 BNC-C-60 60″ 44F2638 26.41 23.76 23.06 22.37 5697-12* 12″ 50F1529 10.95 9.85 9.56 9.28 5697-24* 24″ 50F1530 10.95 9.85 9.56 9.28 5697-36* 36″ 50F1531 10.95 9.85 9.56 9.28 5697-48* 48″ 50F1532 15.83 14.24 13.82 13.41 5697-60* 60″ 50F1533 15.83 14.24 13.82 13.41 5697-72* 72″ 50F1534 15.83 14.24 13.82 13.41 5697-120* 120″ 50F1535 19.19 17.27 16.76 16.26

(68955)

Mfg. Part No.Length

(in.) Color Stock No.Price Each

Each73087-6-0 6 Black 10R1515 17.1173087-6-2 6 Red 10R1516 17.1173087-6-4 6 Yellow 10R1517 17.1173087-6-6 6 Blue 10R1518 17.1173087-9-4 9 Yellow 10R1523 17.4973087-12-0 12 Black 10R1500 17.8373087-12-2 12 Red 10R1501 17.8373087-12-4 12 Yellow 10R1502 17.8373087-12-6 12 Blue 10R1503 17.8373087-20-4 20 Yellow 10R1505 18.6873087-24-0 24 Black 10R1507 19.1073087-24-2 24 Red 10R1508 19.1073087-24-4 24 Yellow 10R1509 19.1073087-24-6 24 Blue 10R1510 19.1073087-36-0 36 Black 10R1511 20.3773087-36-2 36 Red 10R1512 20.3773087-36-4 36 Yellow 10R1513 20.3773087-36-6 36 Blue 10R1514 20.3773087-72-0 72 Black 10R1519 24.1973087-72-2 72 Red 10R1520 24.1973087-72-4 72 Yellow 10R1521 24.1973087-72-6 72 Blue 10R1522 24.19

Mfg. Part No. PinsDimensions

Stock No.Price Each

A B 1-24 25-49 6107 32 0.870″ 0.870″ 91F2996 45.79 41.76 6108 40 1.070″ 1.070″ 91F2997 54.30 49.52 6109 44 1.170″ 1.170″ 91F2998 57.16 52.13

(8906)

(8984)

KELVIN PROBES

(8905)

BNC MALE CABLEASSEMBLIES

SHEATHED 4mm BANANAJUMPER TEST LEAD SETS

Designed for use with 4- and 2-wire measurements.

BNC MALE EACH ENDCABLE ASSEMBLIES

(16327)

KELVIN CLIPS

BNC male/BNC male. 50Ω. 500Vrms,+80°C. (*)Economy style.

• Patented Design for High-Precision Rapid Testing

• Easily Move from One Test Pointto Another for Rapid Readings

• Rating: 30VAC/70VDC• For Use with 4-Wire Kelvin

Meters

SOIC TEST CLIPS

Each jumper test lead set includes one sheathed 4mm banana plug to sheathed 4mm banana plug test lead, and onesheathed 4mm banana plug to sheathed 4mm banana jack patch cord. Plug and housing are molded directly to thecable in an intergral one piece design and wire is double crimped. Multi-leaf banana spring is beryllium copper,nickel-plated for extended insertion cycle life and low contact resistance.High strand count silicone insulated wire offersflexibility and high temperature resistance. Can be used with terminal jacks on pages 2233-2234.

Accurate four wire measurements. 24″ (0.65) long cable features two gold-plated Kelvin clips for low contact resistance,and four color-coded gold-plated banana plugs. Minigator to banana plug lead is included for grounding or guarding.Rated: 30VAC/70VDC.

Molded stress relief boot. 2249-C series: ideal for mosttest and measurement applications, RG58C/U, 50Ω;2249-E series: ideal for use with TV, video and LANsignals, RG59B/U, 75Ω; 4964 series: ideal for low power,low frequency measurements.

BNC-C

Spring-loaded clips for testing SOICand SOJ small outline ICs.

• Nickel-plated brass plugs• Nickel-plated beryllium copper spring• Polypropylene insulator• Silicone wire insulation, O.D. 0.146”

(3.7mm)• 18 AWG wire

8-, 14-, 16-, 20-, 24-, AND 28- PIN SOIC CLIPS—BODY WIDTHS 0.15″ – 0.3″

32-, 40-, AND 44-PIN SOIC/SOJ CLIPS—BODY WIDTHS 0.30″ – 0.60″



9




SHEATHED 4mm BANANA JUMPER TEST LEAD SETS (CONT.)


1-976-005 Male BNC Adapter-To-Binding Posts 16F7677 9.15

Mfg. Part No. Length Color Stock No.Price Each

1-2476-092 20″ Black 84N2134 6.0676-093 20″ Red 84N2135 6.0676-120 40″ Black 84N2157 8.1376-122 40″ Red 84N2158 7.36

(32171)


1-2476-004A Test Clip Lead Kit 12M5887 33.40


1-476-081 Basic Test Lead Accessory Kit 16F7740 35.3176-082 Deluxe Test Lead Accessory Kit 16F7741 68.53

Mfg. Part No. Color Stock No.Price Each

1-2476-006 Red 16F7678 2.5876-007 Black 16F7679 2.58


1-976-108A Test Lead Set 09H0918 7.25

(19633)

• Rated 3A, 500VRMS

Mfg. Part No. DescriptionLeadPitch

Numberof Units Stock No.

Price Each1-5

6351 Long Tip (8mm), 2 Colors 0.85mm to 0.2mm(0.03″ to 0.01″)

10 91B7435 514.95

6352 Long Tip (13mm), 2 Colors 1.25mm to 0.3mm(0.05″ to 0.01″)

10 96B3362 514.95

6353 Short Tip (2mm), 2 Colors 1.25mm to 0.3mm(0.05″ to 0.01″)

10 30K7344 530.39

Mfg. Part No.Length

(in.) Color Stock No.Price Each

Each73087-150-4 150 Yellow 10R1504 32.4773087-210-4 210 Yellow 10R1506 38.84

Mfg. Part No. Length Color Stock No.Price Each

1-976-008 40″ Red 16F7680 6.3476-009 40″ Black 16F7681 6.3476-010 60″ Red 16F7682 7.5376-011 60″ Black 16F7683 7.53

(5968)

Mfg. Part No. Clip Length Color Stock No.Price Each

1-9 SPC12049 Standard 1′ Red 95C0317 6.07 SPC12050 Standard 1′ Black 95C0318 5.99 SPC12051 Standard 3′ Red 95C0319 6.22 SPC12052 Standard 3′ Black 95C0320 6.22 SPC12053 Standard 5′ Red 95C0321 7.07 SPC12056 Standard 5′ Black 95C0324 7.07 SPC12054 Mini 1′ Red 95C0322 4.54 SPC12055 Mini 1′ Black 95C0323 4.69 SPC12057 Mini 3′ Red 95C0325 6.22 SPC12058 Mini 3′ Black 95C0326 5.61

(5955)

(148550)

BNC male connector to 4mm bindingposts. Black thermoplastic body.Black and red binding post insulators.

(74266)

76-082

(32172)

RETRACTABLE STACKINGPLUG-TO- PLUG TEST LEADS

(84767)

(5957)

(5958)

TEST CLIPLEAD KIT

MICRO-SMD GRABBERS

Kit comprised of 8 patch cords: 2 black, 2 red, 1 green, 1 yellow, 1 blue, and 1 white. Every patch cord has miniaturehook clips on each end of 50 cm long, PVC wire. 20VAC/60VDC; 2A max. Sold in sets of 8 cords.

4mm stacking banana plugs with clear retrac-table safety sheath. Flexible PVC jacketed wire.Nickel plated contacts. Choice of 2 colors.

76-006

BASIC AND DELUXE TEST LEAD ACCESSORY KITS

UNSHIELDEDJUMPERS

76-008

TEST LEAD SET

SILICONE PATCH CORDS

Unshielded jumpers available with standard or mini alligator clip on each end. Feature cadmium-plated steel clips withvinyl plastic boots. All leads are 18 AWG, 300V insulated wire.

Mfg. part no. 76-082 contains everything in76-081 but also includes fully-insulated IEC alli-gator clips, in black and red; insulated bananaplug adapters in black and red: insulated spadelug adapters, in black and red; and spring-loadedtip probes, in black and red.

76-004A

SHEATHED STACKINGBANANA PLUGS

MALE BNC ADAPTER-TO-BINDING POSTS

• Low-Cost Test Lead Set forDMMs

• 2mm Tip Probe• 4mm Sheathed Bannana Plugs• Alligator Clip Finger Guards• 1000V CAT III, 10A

• Rated 12A, 750V• Resistance <15mohms

Use with PQFP, SOIC, TSOP and SSOPpackages. Thin body allows an unlimitednumber of clips to be stacked side byside. Maximum frequency is 100MHz.Profile Height: 14 mm (0.55″). Rated forhands free testing in controlled envi-ronment up to 45V. Supplied with femaleto male flying leads.

6311 and 6351

Flexible PVC jacketed wire measures 1.2M long (1-black, 1-red). Right-angle sheathed DMM bananna plugs. Includesgold-plated, phosphor bronze contact alligator clips with finger guards for improved conductivity and retention. CEcompliant.

4mm stacking banana plugs on each end ofhighly flexible silicone-jacketed wire. Rated12A/1200V. Choice of 2 colors. CEcompliant.

SPC 12049

Fully-insulated plug and jack. When assembled meets IEC1010 CAT III 1000V, 36A safety standards. Choice of 2 colors.Allen wrench required for assembly, ordered separately.

76-081• 60″ Red and Black PVC Insulated

Leads 1000V CAT III 12A• Probe Bodies with Replaceable Tips

1000V CAT III 36A• Flexible Pincer Clip 1000V CAT III 6A


2240

9




ALLIGATOR CLIPS

(148861)

Mfg. Part No. Length Stock No.Price Each

1-24 25-49 50-99BU-5050-B-12-0 12″ 89F470 12.09 11.32 9.88BU-5050-B-24-0 24″ 89F471 12.09 11.32 9.88BU-5050-B-36-0 36″ 93F9739 12.09 11.32 9.88BU-5050-B-60-0 60″ 16F3544 20.10 18.87 16.03

Mfg. Part No. Description Length Stock No.Price Each

1-24 25-49BU-00286 Alligator 12″ 83F8069 5.76 5.39BU-00285 Mini-Alligator 18″ 12P9348 6.11 5.76BU-00287 Alligator 18″ 83F8070 8.64 8.09

BU-3030

(9045)

Mfg. Part No. Mounting Stock No.Price Each

1-24 25-49 02-0 Standard Thread Stud 28F550 3.08 2.76 02-60 Studless 57F2651 3.14 2.81 02-20 Miniature Thread Stud 28F414 3.48 3.12 02-41 Ultraminiature Single 28F624 3.48 3.12 02-42 Ultraminiature Double 28F625 3.72 3.33

(39470)

(5061)

BNC MALE BOTH ENDS

INSULATED ALLIGATORAND MINI-ALLIGATORLEAD KITS

Econo-Line lead kits offer skin-tight flexible insulator. All kits have multiple colors to simplify identification. Mfg. partnos. BU-00285 and BU-00287 include 2 each of black, red, yellow, green, and white. Mfg. part no. BU-00286 includes1 each of black, red, yellow, green and white. 22 AWG for all kits. Jaw openings: mfg. part no. BU-00285: 1⁄4″ (6.4mm),mfg. part no. BU-00286: 7⁄16″ (11.1mm) and mfg. part no. BU-00287: 5⁄16″ (7.9mm) max. Mfg. part no. BU-00285 aresold in packages of 10.

BU-3056

Mfg. Part No. Length Color Current Jaw Opening Stock No.

Price Each

1-99100-499

BU-651-0 2.24″ (57) Black 10A 0.27″ 93B1389 5.42 5.15BU-651-2 2.24″ (57) Red 10A 0.27″ 93B1392 5.42 5.15

SAFETY

BU-652-0 3.24″ (82) Black 20A 0.27″ 95B8434 13.18 12.33BU-652-2 3.24″ (82) Red 20A 0.27″ 95B8439 13.55 12.71

FLANGED

Mfg. Part No. Length Color Current Jaw Opening Stock No.Price Each

1-4 5-9 BU-654-0 3.19″ (81) Black 20A 1.00″ 50B5848 11.06 10.44 BU-654-2 3.19″ (81) Red 20A 1.00″ 50B5849 11.06 10.44

BU-5050

02 SERIES TEST CLIPS

Mfg. part no. 02-0 is standard size, #8-32 UNC-2A threaded stud clip. Fits panel up to 0.25″ (6.35) thick; 0.550″ (13.97)wide, 1.25″ (31.75) above board. Mfg. part no. 02-60 is standard size, studless clip with extruded hole tapped toreceive #8-32 UNC-2A threaded screw (not supplied) to adjust tension; 0.576″ (14.63) wide, 1.144″ (29.06) aboveboard. Mfg. part no. 02-20 is miniature size, #6-32 UNC-2A threaded stud clip. Fits panel to 0.25″ (6.35) thick; 0.406″(10.31) wide, 0.719″ (18.26) above board. Mfg. part no. 02-41 is ultraminiature size single-unit clip, 0.406″ (10.31)above board; requires 0.312″ (7.92) x 0.125″ (3.18) panel area. Mfg. part no. 02-42 is ultraminiature size, double-unitclip which requires 0.25″ (6.35) x 0.125″ (3.18) panel area.

BU-5050-B series has a male BNC Connector at both ends. Gold-plated center contact and silver plated bodies. Coaxialcable is shielded RG58C/U, MIL-C17F, 50 ohm.

BU-00287

(49976)

BU-3131

FULLY INSULATEDALLIGATOR CLIPS

Mfg. Part No. AmpClip

LengthHandleInsulat.

Max. JawOpening

Pkg.of Stock No.

Price Each1-49

T115SR 10 2.3″ Red 0.32″ Each 90F7186 0.48T115SB 10 2.3″ Black 0.32″ Each 90F7187 0.48T154 5 1.2″ None 0.24″ Each 90F7188 0.17T641CPR 50 3.0″ Red 0.87″ Each 90F7189 0.62T641CPB 50 3.0″ Black 0.87″ Each 90F7190 0.62

Mfg. Part No. AmpClip

LengthHandleInsulat.

Max. JawOpening

Pkg.of Stock No.

Price Each1-4

T160 10 2.0″ None 0.32″ 500 42F2393 90.85T160S 10 2.0″ None 0.32″ 500 42F2394 70.37T510S 10 2.0″ None 0.43″ 500 42F2398 241.55

Fully-insulated alligator clips that accept either unshrouded or retractable 4mm banana plugs. Available in 2 colors.BU-651 series is 2.24″ (57mm) long. BU-652 series is 3.24″ (82mm) long. Both are IEC 1010 compliant 300V CAT II,150V CAT III. BU-654 series is 3.19″ (81mm) long, IEC 1010 compliant 1000V CAT II, 600V CAT III.

(5478)

BU-652-0

BU-3156

ALLIGATOR CLIPS

T115S

BU-654-0

T154

BU-3070

BU-651-0

T160

T160S

BU-5030

T510S

BU-5031

T641 CPR, T641CPB

Mfg. part no. BU-3030 insulated alligator clip both ends.

All are steel with nickel plating. Suffix S in mfg. part no. indicates clip with screw.

Mfg. part no. BU-3056 nickel-plated steel, insulated alligator clips with 2″ (51mm) positive lead and 7″ (178mm)negative lead. With molded Y-block to insulated BNC Male.Mfg. part no. BU-3070 insulated alligator clips, positive and negative with 3″ (76.2mm) and 8″ (203.2mm), respectivelylead wires with molded Y-block to stackable double banana plug.Mfg. part no. BU-3131 insulated mini-alligator clip, both ends.Mfg. part no. BU-5030 insulated alligator clips, positive and negative with 3″ (76.2mm and 8″ (203.2mm), respectivelylead wires with molded Y-block to BNC Male.Mfg. part no. BU-5031 insulated mini-alligator clips, positive and negative with 3″ (76.2mm) and 8″ (203.2mm),respectively lead wires with molded Y-block to BNC Male.Mfg. part nos. ending with -0 are black, -2 are red.

Mfg. Part No. Length Stock No.Price Each

1-24 25-49 50-99BU-3030-A-24-0 24’’ 89F463 11.00 9.93 8.96BU-3030A-24-2 24’’ 89F464 11.00 9.93 8.96BU-3131-A-24-0 24’’ 89F467 10.60 9.56 8.63BU-3131-A-24-2 24’’ 89F468 10.60 9.56 8.63BU-3056-C-24-0 24’’ 16F3573 26.22 23.56 22.74BU-3070-C-24-0 24’’ 90F5728 50.45 45.29 40.96BU-5030-C-24-0 24’’ 90F5770 30.25 27.29 24.64BU-5031-C-24-0 24’’ 90F5771 30.25 27.29 24.64

(9047)



9




GENERAL-PURPOSE BANANA PLUGS, BANANAJACKS AND SAFETY SOCKETS

(148841)

BU-00245

Mfg. Part No. Jaws Open (in.) Stock No.

Price Each

1-24 25-49 50-99100-499

BU-45 5⁄16 28F513 0.97 0.88 0.79 0.72BU-45C 5⁄16 28F514 1.61 1.46 1.32 1.20

CROCODILE SOLID COPPER CLIPSMfg. part no. BU-50C has beryllium copper piercing needle in top jaw; 6-32 brass screw, rated 20A. Mfg. part no.BU-51C same as mfg. part no. BU-50C, but no needle; clip length: 29⁄32″ , 6-32 steel screw. Mfg. part nos. BU-85 andBU-85C are 10A clips; clip length 21⁄8″

BU-50C 0.500 28F510 3.88 3.50 3.16 2.88BU-51C 0.500 28F511 2.78 2.51 2.26 2.06

BU-85 0.313 28F507 1.09 0.98 0.89 0.81 BU-85C 0.313 28F508 2.10 1.89 1.71 1.56

ALLIGATOR TEST CLIPSMfg. part no. BU-27 solid copper, crimp or screw connection; jaw opening 5⁄8″, rated 40A. Mfg. part no. BU-55 is aneconomy steel clip with screw connections; jaw opening 7⁄16″, rated 10A.

BU-27CG 1⁄4″(6.3) L-Copper 16F3583 2.41 2.17 1.96 1.79 BU-27CGW 1⁄2″ (12.7) L-Copper 16F3584 2.41 2.17 1.96 1.79

BU-55 Economy Steel Clip 16F3582 0.78 0.71 0.70 0.65

BU-00246

(9066)

GENERAL-PURPOSE“PEE-WEE” CLIPS

LengthBlack

Mfg. Part No. Stock No.Red

Mfg. Part No. Stock No.Price Each

1-24 25-494.6″ (117.5) BU-20431-0 93F9781 BU-20431-2 93F9782 8.03 7.585.3″ (133.4) BU-20432-0 93F9783 BU-20432-2 93F9784 11.86 11.195.3″ (133.4) BU-20434-0 93F9785 BU-20434-2 93F9786 34.46 32.517.3″ (184.1) BU-20433-0 16F3557 BU-20433-2 16F3558 13.39 12.63

Mfg. Part No. Fig. Clip Length Stock No.

Price Each

1-24 25-49 50-99100-499

BU-30 2 13⁄32″ 28F528 0.49 0.44 0.40 0.36 BU-30C 2 13⁄32″ 28F529 0.74 0.67 0.61 0.55 BU-30BL 4 11⁄4″ 46F3810 0.47 0.42 0.38 0.35 BU-30TBO 3 11⁄2″ 87F3721 1.05 0.95 0.86 0.78 BU-34 1 13⁄32″ 28F496 0.88 0.79 0.72 0.65 BU-34C 1 13⁄32″ 28F497 1.17 1.05 0.95 0.87

BU-00247

Mfg. part no. BU-45 plated steel finish; rated 5A . Mfg. part no. BU-45C burnished copper finish; rated 10A. Clip length:117⁄32″.

(9062)

Mfg. Part No. Fig. Clip Length (in.) Stock No.Price Each

1-24 25-49 50-99BU-60CHS-0 1 211⁄32 28F506 1.91 1.72 1.55BU-60CHS-2 1 211⁄32 28F505 1.91 1.72 1.55BU-60HS-0 1 211⁄32 28F504 1.27 1.14 1.03BU-60HS-2 1 211⁄32 28F503 1.27 1.14 1.03

BU-60HPR-0 2 215⁄64 16F6684 0.90 0.82 0.79 BU-60HPR-2 2 215⁄64 16F6685 0.90 0.82 0.79 BU-60PR-2 2 131⁄32 28F464 1.01 0.91 0.83 BU-70CS 2 111⁄16 28F532 1.21 1.09 0.98 BU-70S 2 111⁄16 28F531 0.97 0.88 0.79

BU-63-0 3 21⁄4 28F533 1.85 1.67 1.51BU-63-2 3 21⁄4 28F534 1.85 1.67 1.51BU-63C-0 3 21⁄4 28F535 2.49 2.24 2.03BU-63C-2 3 21⁄4 28F536 2.49 2.24 2.03

BU-60 4 131⁄32 28F500 0.59 0.53 0.44 BU-60C 4 131⁄32 16F3572 0.90 0.82 0.80 BU-60CS 4 131⁄32 28F502 1.46 1.32 1.19 BU-60S 4 131⁄32 28F501 0.80 0.72 0.65 BU-60U 4 131⁄32 46F3809 0.59 0.53 0.48 BU-60X 4 131⁄32 83F8060 1.17 1.09 0.96 BU-60TBO 4 131⁄32 82C0881 1.19 1.07 0.97 BU-65-0 5 31⁄4 93F9833 8.29 7.48 6.75 BU-65-2 5 31⁄4 93F9831 8.29 7.48 6.75

(9064)

5-AMP MINIATUREALLIGATOR CLIPS

PLUNGER-TYPE TEST CLIPS

(9065)

Fig. 1

BU-20431

BU-00243, BU-00244

10A ALLIGATOR CLIPS

BU-20434

All general-purpose banana plugs and jacks are rated 15A. Size: 0.16″ (4). Also available in red and other styles; goonline or call Newark.

Fig. 1

Fig. 2

Fig. 2

BANANA PLUGS AND JACKS

BU-20432

Fig. 3


1-24BU-00245-0 Banana Plug with Set Screw, Black 93F9718 2.56BU-00246-0 Banana Plug with Tapered Handle, Black 93F9720 1.76BU-00249-0 Stackable Banana Plug, Black 37B8573 3.54BU-00247-0 Dual Banana Plug, Black 93F9710 4.07BU-00243-0 Solderless Banana Plug, Black 93F9716 3.07BU-00244-0 Solderless Banana Plug, Hex Design, Black 93F9714 3.07BU-00233-0 Insulated Banana Jack, Black 93F9819 1.76

BU-20433Fig. 3

Fig. 4

(84785)

BU-20431 series insulated plunger hook clips with spring-loaded rigid hook for connection to terminals up to 0.059″(1.5). IEC 1010 compliant rated 1000V 3A. BU-20432 series insulated hook clips with 2 fine steel wire hooks forconnection to small circuitry. Flexible shaft. IEC 1010 compliant rated 1000V 1A. BU-20434 series insulated plungerjaw clips feature steel alligator clip type jaw that opens up to 0.78″ (19.91) when plunger is depressed. IEC 1010compliant rated 1000V 15A. BU-20431 and BU-20432 series and BU-20433 series are UL listed and CE compliant.Suffix 0: black, suffix 2: red.

Fig. 4

Plated steel except “C” suffix burnished copper. Mfg. part nos. BU-30 and BU-30C for #20 wire or smaller. Mfg. partno. BU-30BL barrel tail; solder or crimp connection. Mfg. part no. BU-30TBO threaded barrel tail; connects to 6-32threaded male test prod. Mfg. part nos. BU-34 and BU-34C for #20 wire or smaller; solder connection.

Fig. 5All clips are plated-steel except for mfg. part nos. BU-60CHS, BU-63C, BU-60C, BU-60CS and BU-70CS which areburnished-copper, and mfg. part no. BU-65 which is plated-brass. Mfg. part nos. BU-60CHS and BU-60HS haveinsulated acetate handle and 6-40 screw. Mfg. part no. BU-60HPR has 0.080″ I.D. barrel with insulated acetate handle.Mfg. part nos. BU-63 and BU-63C have 2-piece flexible vinyl insulation and barrel takes wire or banana plug. Mfg. partnos. BU-60 and BU60C have lip for soldering. Mfg. part nos. BU-60S and BU-60CS are the same as mfg. part nos.BU-60 and BU60C except have a 6-40 screw. Mfg. part no. BU-60X is the same as BU-60 except solid stainless steel.Mfg. part no. BU-60U has a U-shaped barrel. Mfg. part no. BU-60TBO has a threaded barrel. Mfg. part no. BU-70S israted 5A and has a 6-40 screw. Mfg. part no. BU-65 is an insulated, plug-on clip rated 30A, UL listed with jaws thatopen to 3⁄4″. NOTE: Mfg. part nos. with suffix 0 are: black, suffix 2 are: red. Other colors available; go online or callNewark.


2242

9




PLIER-TYPE BATTERY CLIPS (CONT.)

(148844)

Mfg. Part No. For Clips Stock No.

Price Each

1-24 25-49 50-99100-499

BU-13-2 BU-11-A, BU-11-C 28F488 5.05 4.55 4.11 3.75BU-13-0 BU-11-A, BU-11-C 28F489 5.05 4.55 4.11 3.75BU-23-2 BU-21-A, BU-21-C 28F484 2.37 2.14 1.93 1.76BU-23-0 BU-21-A, BU-21-C 28F485 2.37 2.14 1.93 1.76BU-26-2 BU-24-A, BU-25, BU-25-C 28F482 1.75 1.58 1.43 1.30BU-26-0 BU-24-A, BU-25, BU-25-C 28F483 1.75 1.58 1.43 1.30BU-29-2 BU-27, BU-27-C 28F486 1.17 1.05 0.95 0.87BU-29-0 BU-27, BU-27-C 28F487 1.17 1.05 0.95 0.87BU-31-2 BU-30-BL, BU-30-TBO 87F3718 0.41 0.37 0.34 0.31BU-31-0 BU-30-BL, BU-30-TBO 87F3719 0.41 0.37 0.34 0.31BU-32-2 BU-30, BU-30-C 28F472 0.37 0.34 0.31 0.28BU-32-0 BU-30, BU-30-C 28F473 0.37 0.34 0.31 0.28BU-35-2 BU-33-C 28F480 12.78 11.48 10.38 9.48BU-35-0 BU-33-C 28F481 12.78 11.48 10.38 9.48BU-36-2 BU-34, BU-34-C 28F499 0.37 0.34 0.31 0.28BU-36-0 BU-34, BU-34-C 28F498 0.37 0.34 0.31 0.28BU-47-2 BU-45, BU-45-C 28F476 0.45 0.41 0.37 0.34BU-47-0 BU-45, BU-45-C 28F477 0.45 0.41 0.37 0.34BU-49-2 BU-48-B, BU-48-C 28F478 1.05 0.95 0.86 0.78BU-49-0 BU-48-B, BU-48-C 28F479 1.05 0.95 0.86 0.78BU-62-2 All BU-60 Series 28F492 0.41 0.37 0.34 0.31BU-62-0 All BU-60 Series 28F493 0.41 0.37 0.34 0.31BU-87-2 BU-85, BU-85-C 28F490 0.68 0.62 0.56 0.51BU-87-0 BU-85, BU-85-C 28F491 0.68 0.62 0.56 0.51

(9070)

FLEXIBLE VINYLINSULATORS FOR CLIPS

Mfg. Part No. Fig. Clip Length Jaws Open Stock No.

Price Each

1-24 25-49 50-99100-499

BU-75K 1 15⁄8″ 5⁄16″ 90F1604 20.90 18.85 17.02 15.51 BU-78K 2 2.28″ 1⁄2″ 84F764 88.66 79.98 72.21 65.81

Protective flexible vinyl insulators. Mfg. part nos. with suffix 0 = black, suffix 2 = red. Other colors available; go online orcall .

(9583)

BU-13-2

KELVIN CLIPS (10-AMP)

Mfg. Part No.Current

(A) Color Stock No.Price Each

1-99 BU-102W-0 500 Black 20J3348 18.01 BU-102W-2 500 Red 20J3349 18.01

BU-X15400-0 400 Black 51B571 10.10BU-X15400-2 400 Red 51B572 10.39

Mfg. Part No.Current

(A) Color Stock No.Price Each

1-99BU-40A-0 15 Black 20J3360 0.78BU-40A-2 15 Red 20J3361 0.78BU-40C-0 20 Black 20J3362 1.27BU-40C-2 20 Red 20J3363 1.27BU-46A-2 50 Red 28F468 1.85BU-46A-0 50 Black 28F467 1.85BU-46C-2 75 Red 46F3812 3.28BU-46C-0 75 Black 46F3811 3.28BU-41A-2 200 Red 28F465 6.64BU-41A-0 200 Black 28F466 6.64BU-41C-2 400 Red 90F1267 19.50BU-41C-0 400 Black 87F3651 19.50

BU-102B-0 300 Black 20J3344 20.87 BU-102B-2 300 Red 20J3345 20.87 BU-102BK-0 300 Black 20J3346 26.68 BU-102BK-2 300 Red 20J3347 26.68

Mfg. Part No. Fig. AmpsClip

LengthJawsOpen Stock No.

Price Each

1-24 25-49 50-99100-499

BU-11APN 1 100 6″ 15⁄8″ 16F6674 7.44 6.80 6.63 6.16BU-11APS 1 100 6″ 15⁄8″ 16F6675 7.62 6.98 6.69 6.34BU-11CPN 1 200 6″ 15⁄8″ 16F6676 15.20 13.89 13.30 12.59BU-11CPS 1 200 6″ 15⁄8″ 16F6677 15.20 13.89 13.30 12.59

BU-33C 1 300 73⁄4″ 113⁄16″ 28F522 45.40 40.95 36.98 33.70BU-21APN 2 50 47⁄64″ 11⁄16″ 16F6678 2.85 2.60 2.53 2.36BU-21APS 2 50 47⁄64″ 11⁄16″ 16F6679 2.85 2.60 2.53 2.36BU-21CPN 2 100 47⁄64″ 11⁄16″ 16F6680 7.86 7.19 7.00 6.51BU-21CPS 2 100 47⁄64″ 11⁄16″ 16F6681 7.86 7.19 7.00 6.51BU-24APN 3 25 227⁄32″ 3⁄4″ 16F6682 1.46 1.34 1.30 1.21BU-24APS 3 25 227⁄32″ 3⁄4″ 16F6683 1.46 1.34 1.30 1.24

BU-25 4 40 3″ 3⁄4″ 90F2011 1.96 1.77 1.60 1.46 BU-25C 4 75 3″ 3⁄4″ 28F519 4.87 4.40 3.97 3.62

GENERAL-PURPOSE CLIPSMfg. part nos. BU-27, BU-48B are steel; mfg. part nos. BU-27C, BU-48C are burnished copper.

BU-27 4 20 27⁄16″ 5⁄8″ 28F523 1.40 1.26 1.14 1.04BU-27C 4 40 27⁄16″ 5⁄8″ 28F524 2.31 2.09 1.88 1.72

BU-48B 4 10 2″ 1⁄2″ 28F515 1.28 1.16 1.05 0.96 BU-48C 4 20 2″ 1⁄2″ 28F538 1.81 1.63 1.47 1.34

Fig. 1

(9068)

(9067)

PLIER-TYPE BATTERY CLIPS

Fig. 2

HEAVY-DUTY TESTAND BATTERY CLIPS

Used for 4-wire resistance measurement systems. Jaws are electrically isolated when open, shorted when closed. Mfg.part no. BU-75K silver/gold tip contacts, 18 AWG wire. Mfg. part no. BU-78K features a current path for the source anda circuit path for the sense gold contacts, 20 AWG wire.

BU-40A-0

Fig. 1

BU-40A-2

Fig. 2

BU-41 series clips lock on both side and top terminal batteries, 9⁄16″ ID lug for #2 AWG wire. Jaws open: 19⁄16″. Cliplength: 6″. BU-40 and BU-46 series clips are ideal for trickle chargers and timing lights. Jaws open: 11⁄8″. Clip length:37⁄8″. BU-102B series clips are similar to BU-41 series clips except they are fully insulated. BU-102BK series arefully-insulated Kelvin clips. BU-102W series are fully-insulated clips ideal for welding applications. BU-X15400 seriesepoxy coated steel clips with copper-plated jaws that open 11⁄2″. Clip length: 63⁄4″. All clips have vinyl insulating sleevesexcept those that are fully-insulated or epoxy-coated. NOTE: “A” in mfg. part no. indicates copper-plated steel; “C”indicates burnished solid copper. Suffix 0 in type number indicates black; suffix 2 indicates red . Other colors areavailable; go online or call Newark.

Fig. 3

BU-102B-0

Fig. 4

BU-102B-2

A range of versatile heavy-duty clips designed for battery operated equipment and automotive use etc. Mfg. part nos.with suffix “A” are steel; suffix “C” are burnished copper; suffix “PN” are unmarked; suffix “PS” marked positive.

HEAVY-DUTY CLIPS



9

Find the Latest Technologies Online ENVIRONMENTAL TEST EQUIPMENT

THERMAL IMAGERS


FLK-Ti4x AND FLK-Ti5x INFRARED FLEXCAM® THERMAL IMAGERS WITHIR-FUSION™ (CONT.)

Mfg. Part Nos.FLK-

Ti40FT-20FLK-

Ti45FT-20FLK-Ti45FT/

HT-20FLK-

Ti50FT-20FLK-

Ti55FT-20Thermal Sensitivity ≤0.09°C NETD ≤0.08°C NETD ≤0.08°C NETD ≤0.07°C NETD ≤0.07°C NETDFeatures 180° articulating flexible lens

3 interchangeable lenses 5″ high-contrast color LCD Fully radiometric for detailed temperature analysis and tracking SmartFocustm for best image quality and accurate temperaturemeasurements Windows® CE based menus simplify use Personalized setups for multiple users or applications CompactFlash memory cards for storage of 1000 IR images plus fullradiomaetric temperature data SmartViewtm reporting and analysis software Autocapture for identifying intermittent problems On-board analysis functions User-defined text annotations for simplid=fied reporting Built-in visible light camera IR-Fusiontm blends thermal and visible light images to pinpointproblems IR/Visible Alarm function Laser pointer Flash and torch light for high-quality images in dark environments

Mfg. Part Nos.FLK-

Ti40FT-20FLK-

Ti45FT-20FLK-Ti45FT/

HT-20FLK-

Ti50FT-20FLK-

Ti55FT-20Detector Size 160 x 120 320 x 240Temperature Range -20° to 350°C

(-4° to 1112°F)-20° to 600°C(-4° to 1112°F)

-20° to 600°C(-4° to 1112°F)

-20° to 350°C(-4° to 1112°F)

-20° to 600°C(-4° to 1112°F)

Mfg. Part Nos. FLK-TIR2/FT-20 FLK-TIR3/FT-20 FLK-TIR4/FT-20Detector Size 160 x 120 320 x 240Temperature Range -20° to 100°C (-4° to 212°F)Thermal Sensitivity ≤0.07°C at 30°C (70mK) ≤0.05°C at 30°C (50mK)Features 180° articulating flexible lens

5″ high-contrast color LCD SmartFocustm for best image quality and accurate temperaturemeasurements Windows® CE based menus simplify use CompactFlash memory cards for storage of 1000 IR images SmartViewtm reporting and analysis software Autocapture for identifying intermittent problems On-board analysis functions User-defined text annotations for simplid=fied reporting Built-in visible light camera IR-Fusiontm blends thermal and visible light images to pinpointproblems IR/Visible Alarm function Laser pointer Flash and torch light for high-quality images in dark environments

Mfg. Part No. Description Stock No. Price EachFLUKE-TI40T Infrared Flexcam Thermal Imager with IR-Fusion 11N6469 13990.00FLUKE-TI45FT/HT Infrared Flexcam Thermal Imager with IR-Fusion 11N6470 21490.00FLK-TI45FT-20 Infrared FlexCam Thermal Imager with IR-Fusion 89K7334 18490.00FLUKE-TI50FT-20 Infrared Flexcam Thermal Imager with IR-Fusion 11N6471 22990.00FLK-TI55FT-20 Infrared FlexCam Thermal Imager with IR-Fusion 89K7357 26490.00

Mfg. Part No. Description Stock No. Price EachFLK-TIR2/FT-20 IR FlexCam Thermal Imager with IR-Fusion 89K7315 12495.00FLK-TIR3/FT-20 IR FlexCam Thermal Imager with IR-Fusion 55M0583 16495.00FLK-TIR4/FT-20 IR FlexCam Thermal Imager with IR-Fusion 55M0588 19995.00

(88861)

Mfg. Part Nos. TiR1 TiR Ti25 Ti10Field of View (FOV) 23° horizontal x 17° verticalMinimum focus distance Thermal lens: 15 cm (approx. 6 in), Visible (visual) light lens: 46 cm

(approx. 18 in)Thermal Sensitivity (NETD) <0.07°C at

30°C (70mK)<0.1°C at 30°C

(100mK)<0.1°C at 30°C

(100mK)<0.2°C at 30°C

(200mK)Detector size 160 x 120Temperature Measurement range

-20 °C to +100 °C (-4 °F to +212 °F)

-20 °C to +350°C (-4 °F to+662 °F), 2

ranges

-20 °C to +250°C (-4 °F to+482 °F)

Accuracy ±2°C or 2%(Whichever is

greater)

±5°C or 5%(Whichever is

greater)

± 2 °C o r 2 %(whichever is

greater)

± 5 ° C o r 5 %(whichever is

greater)Digital display 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCDPalettes Ironbow, blue-

red, highcontrast,

amber, hotmetal, grey

Ironbow, blue-red, high

contrast, grey

Ironbow, blue-red, highcontrast,

amber, hotmetal, grey

Ironbow, blue-red, high

contrast, grey

Storage medium 2GB SD card stores up to 3000 .bmp IR images or 1200 .IS2 IR-Fusion images

Voice memo recorder(voice annotation)

Yes No Yes No

Battery type Internal rechargeable battery (included)Battery operating time 3 to 4 hours continuous operation

Mfg. Part No. Description Stock No. Price EachFLK-TIR 9HZ Thermal Imager with IR Fusion® 72M5711 4495.00FLK-TIR1 9HZ Thermal Imager with IR Fusion® 72M5712 6995.00FLK-TI10 9HZ Thermal Imager with IR Fusion® 72M5714 4495.00FLK-TI25 9HZ Thermal Imager with IR Fusion® 72M5715 7495.00TI-CAR CHARGER Thermal Imager Car Charger 72M5717 110.00

ACCESSORYDurable, heavy-duty plastic accessory visor is perfect for reducing LCD screen glare, reflections in bright sunlight, or inother areas where ambient lighting conditions are bright. For use inside or outside, clips onto the thermal imager withoutthe need for any additional hardware. Easily removed and stored when not in use. For use with: FLK-Ti25, FLK-Ti10,FLK-TiR1, and FLK-TiR Thermal Imagers.

Mfg. Part No. Description Stock No. Price EachTI-VISOR Thermal Imager Visor 46P3044 99.73

(116820)

FLK-Ti4x AND FLK-Ti5x INFRARED FLEXCAM®

THERMAL IMAGERS WITH IR-FUSION™

IR FlexCam® thermal imagers produce the industry’s largest and sharpest thermal images, thanks to a 5″ display andlow-noise VOx sensors. These easy-to-use, professional-quality imagers offer an extended troubleshooting feature setfor on-the-spot analysis in the field. The ideal tool for maintenance and production engineers, both models featureIR-Fusion™ technology to better pinpoint impending problems and have an RCA video output jack for thermal videorecording (using an external VCR or DVD recorder, not included). All models include heavy-duty carrying case, tworechargeable battery packs, battery charger, AC adapter, video cable, 512MB compact flash card, compact flash cardreader, USB cable, PCMCIA compact flash card reader, neck strap, SmartView™ reporting and analysis software on CD,and a user manual on CD. Other models and accessories are available; go online or call.

(105373)

FLEXCAM THERMAL IMAGERWITH IR-FUSION™

The Fluke TiR2FT, TiR3FT and TiR4FT Thermal Imagers include the innovative IR-Fusion® Technology to assist inpinpointing building problems. IR-Fusion captures both a visual (or visible light) image and an infrared image and fusesthem together, not overlay the image. It alligns the two on the imager for a more accurate view at any distance. Allmodels include heavy-duty carrying case, two rechargeable battery packs, battery charger, AC adapter, video cable,512MB compact flash card, compact flash card reader, USB cable, neck strap, SmartView™ reporting and analysissoftware on CD, and a user manual on CD. Other models and accessories are available; go online or call.

FLUKE Ti25 and Ti10THERMAL IMAGERS

SPECIFICATIONS:

SPECIFICATIONS:

Ti, TiR

• IR-Fusion® technology provides enhancedproblem detection and analysis capabilitiesthrough the blending of visual and infraredimages in various different viewing modes

• Rugged and Reliable• Intuitive, three-button menu is easy to use • Identify even small temperature

differences that could indicate problemswith excellent thermal sensitivity (NETD).

• Includes easy-to-use SmartView® fullanalysis and reporting software

• Two-year warranty

SPECIFICATIONS:

High-performance, fully radiometric imagers are ideal for troubleshooting electrical installations, electro-mechanicalequipment, process equipment, HVAC/R equipment and other applications. Order optional car charger seperately below.


2244

9

Find Datasheets OnlineENVIRONMENTAL TEST EQUIPMENT

THERMAL IMAGERS • IR THERMOMETERS


(148887)

Mfg. Part No. FLUKE-62 FLUKE-63 FLUKE-66 FLUKE-68MAX./MIN. Temperatures No Yes Yes MAX onlyAudible/Visible LO Alarm No Yes Yes NoAudible/Visible HI Alarm No Yes Yes NoDatalogging No No Yes Yes

Mfg. Part No. Description Stock No. Price EachFLK-050-CLKT Infrared Window, 2″ (50mm) C-Range, Kwik-Twist Cover 10R2302 299.00FLK-075-CLKT Infrared Window, 3″ (75mm) C-Range, Kwik-Twist Cover 10R2303 538.00FLK-100-CLKT Infrared Window, 4″ (100mm) C-Range, Kwik-Twist Cover 10R2304 625.00

Mfg. Part No. FLUKE-572 FLUKE-574MAX./MIN. Temperatures Yes YesDIF./AVG. Temperatures No YesAudible/Visible LO Alarm No YesAudible/Visible HI Alarm No Yes100-Point Datalogging No YesDatagraphing Software No Yes

Mfg. Part No. Description Stock No. Price EachFLUKE-62 Mini Infrared Thermometer 26K2578 99.50FLUKE-63 Infrared Thermometer 16J0481 265.00FLUKE-66 Infrared Thermometer 16J0485 490.00FLUKE-68 Infrared Thermometer 16J0482 615.00FLUKE-68IS* Intrinsically-Safe Infrared Thermometer with RTD Temperature

Probe57K0679 840.00

ACCESSORIES

80PR-60 RTD Temperature Probe 41J1651 66.85H6 Holster Case 21J7078 35.75

(148582)

Mfg. Part No. Description Stock No. Price EachFLUKE-572 Precision Infrared Thermometer 26K2572 830.00FLUKE-572-CF Precision Infrared Thermometer with Close Focus 37K6867 830.00FLUKE-574-CF Precision Infrared Thermometer with Close Focus and

Datalogging37K8685 1265.00

FLUKE-574NI Nonincendive Precision Infrared Thermometer withDatalogging

36K4115 2525.00

(84678)

HAWK IR C-RANGEINFRARED WINDOWS

(84527)

FLUKE-570 SERIES PRECISIONINFRARED THERMOMETERS

• Engineered and tested to withstandelectric-arcs up to 50kA for 30 cycles

• Certified by UL and CSA for Type 3/12(Outdoor) environments

• CLIRVU® coating • Quadraband™ optic is IR-Fusion®

compatible • C-Range windows include an attached

identification plate

FLUKE-60 SERIES INFRARED THERMOMETERS

FLUKE-62

• Temperature range: -30° to 900°C (-25° to1600°F)

• Backlit LCD display for poorly lit areas• Holds last ten temperature readings and

displays on bargraph for easy reference• Enhanced optics (distance-to-spot ratio up

to 60:1) allows measurements of smallerobjects from farther away

• Coaxial three-dot laser sighting systemhighlights the true diameter ofmeasurement spots at all distances

• 250 mSec response time • Adjustable emissivity setting

C-range infrared windows increase the safety and speed of electrical thermography. These arc-resistant, outdoorcertified, infrared windows allow thermal, ultraviolet, visual and fusion technologies to be used without exposingpersonnel to live equipment. All infrared windows from Hawk IR International use the unique Quadraband™multispectral optic, allowing inspection with any camera for total flexibility. Each infrared window comes complete witha security access key, installation instructions and self-adhesive drilling template.

All Models:

• Spot measure: Determine the absolute surface temperature of an object• Temperature differential: Compare two spot measurements against each other• Scanning: Detect changes along a wide or continuous region target

Temperature Measurement Techniques

FLUKE-68

• Fast response• Dual display• Choice of calibrated or non-calibrated models• Temperature range: -30° to 760°C (-25° to 1400°F)• Backlit LCD display for poorly lit areas• Holds temperature reading for 7 seconds• Single point, offset laser sighting• Recommended accessories - H6 holster, 80PR-60 Temperature Probe• Includes 9V battery and operator’s guide

FLUKE-570 series noncontact, infrared thermometers are ideal diagnostic tools for maintenance professionalsrequiring the most accurate temperature readings at all distances. Measures surface temperatures, helping to quicklylocate potential blockages or malfunctioning systems reducing work and follow-up time and improving performance.From close-up electrical connections, to far-distance room balancing checks, these precision thermometers can take IRtemperature measurements with ease. Maintenance professionals requiring analysis and documentation should ordermfg. part no. FLUKE- 574 with 100-point data logging and digital photographs with the included Windows® compatiblesoftware. FLUKE-570 series units include: 2 AA batteries, operator’s guide (on CD), durable hard storage case,thermocouple K probe (mfg. part no. FLUKE-574), AC power supply with RS232 data cable (mfg. part no. FLUKE-574),USB 1.1 cable, and data-graphing, storage, and analysis software for follow-up reporting and documentation (mfg. partno. FLUKE-574).

All Models:

FLUKE-63, FLUKE-66 and FLUKE-68:

FEATURES AT A GLANCE:

• Enhanced optics (distance-to-spot ratio up to 50:1) allowsmeasurements of smaller objects from farther away

• ±1% of reading, or ±1°C (±2°F) accuracy, whichever is greater• Displays maximum measurements• Includes 1 year warranty, CD with user manuals and durable hard case

FLUKE-66 and FLUKE-68:

FLUKE-574:

• Logs temperature measurements to memory• Adjustable emissivity setting for more accurate measurements• Displays minimum, maximum and average measurements• Jack for optional RTD contact probe

• Instantly captures photographs oftemperature measurement locationsfor improved documentation

FLUKE-60 series non contact, infrared thermometers are ideal diagnostic tools for quick and accurate temperaturereadings at all distances. These handheld portable tools enable professionals to research heating and ventilationproblems and monitor the status of electrical motors and electrical panels. Mfg. part no. FLUKE-62 Mini is the perfectintroduction to infrared thermometers for the professional. This compact and portable tool offers quick and reliablesurface temperature readings. Mfg. part no. FLUKE-63 allows for continuous temperature monitoring with the lockingtrigger and tripod mount capability. Mfg. part nos. FLUKE-66 and -68 are the ideal professional diagnostic tools forHVAC technicians performing room balance checks, electricians evaluating electrical connections and auto mechanicsdiagnosing catalytic converters. They measure surface temperatures, helping to quickly locate potential blockages ormalfunctioning systems reducing work time and improving performance. Order mfg. part no. 80PR-60 RTD probe formfg. part nos. FLUKE-66 and -68 models and mfg. part no. H6 nylon holster case separately below.

FLUKE-576

FLUKE-62 Only:

FLUKE-572, FLUKE-574

• 10:1 distance to spot size• ±1.5% of reading, or ±2°C (±3.5°F) accuracy, whichever is greater• Fitted carrying case

Mfg. part nos. with CF suffix feature close focusing for specialized applications, such as electrical components andprovide minimum measurement diameter 0.24″ (6mm) and distance-to-spot (D:S) ratio: 50:1. When safety is a concernand data logging and downloading are required, mfg. part no. Fluke-574NI nonincendive model is ideal. It has thesame features as mfg. part no. FLUKE-574 with the extra confidence of a Factory Mutual approval for use in hazardousenvironments. Its nonincendive rating reads: “Class I, Division 2, Groups A, B, C, D; Class I, Zone 2 IIC; T4 Ta=50°C whenused with 1.5V alkaline batteries.” Mfg. part no. Fluke-574NI does not release enough electrical or thermal energy toignite flammable gases or vapors under normal operational and environmental conditions.

FLUKE-62 and FLUKE-63:• Emmissivity pre-set to 0.95• Large temperature display provides current and MAX surface

temperature

*Mfg. part no. 68IS intrinsically-safe model is approved by Factory Mutual Research, a USA organization, for usein hazardous locations. Factory Mutual Research Intrinsically Safe approval, including probe (Intrinsically Safe,Class I, Division 1, Groups A, B, C, D Class I, Zone 0, AEx ia IIC, T4 at 50 C when used with 9 V alkaline battery.)Groups A, B, C, D refers to: Acetylane, Hydrogen, Ethylene and Propane. Approval does not apply to atmospherecontaining coal dust, grain dust, metal dust, or fibers.



9


IR THERMOMETERS


Mfg. Part Nos. TMD10Display Dual 5-digit LCD displaysPower Supply 9V NEDA 1604, IEC 6F22, JIS 006P batteryMeasurement Rate 0.5 secOperating environment 0°C to 50°C (32°F to 122°F)Sensor Type K and J thermocouplesAutomatic power off approx. 6 minutesThermocouple type K-type: -200°C to 370 °C (-328 °F to 2498 °F)

J-type: -200°C to 1050 °C (-328°F to 1922 °F)Resolution 0.1 degree C or FBattery life approx. 200 hoursAccuracy ± (0.05 % rdg + 0.7 °C), ± (0.05 % rdg + 1.4 °F)

Mfg. Part No. DescriptionMeasurement

Range Stock No.PriceEach

80PK-1 Type-K Thermocouple Bead Probe -40° to +260°C 46F3517 24.2580PJ-1 Type-J Thermocouple Bead Probe -40° to +260°C 95B1732 21.9080PK-3A Type-K Thermocouple Surface Probe 0° to 260°C 46F3519 121.6580PK-8 Type-K Thermocouple Pipe Clamp Probe for

0.25″ - 1.375″ pipes-29° to +149°C 66F792 133.75

80PK-10 Type-K Pipe Clamp Probe for 1.25 to 2.5″pipes

-40° to +260°C 09R2355 169.95

80PK-18 Type-K, Pipe Clamp Thermocouple Probe Kit,0-2.5″

-50 to 150°C 09R2356 269.95

80PJ-9 Type-J Thermocouple General-PurposeProbe

-40° to +260°C 95B1777 43.60

80T-150UA Universal Temperature Probe -50 to 150°C 05N1068 194.6580PK-EXT Type-K Thermocouple Extension Wire Kit, 3M Max. 260°C 95B1780 40.2080PJ-EXT Type-J Thermocouple Extension Wire Kit, 3M Max. 260°C 95B1779 40.2080PT-EXT Type-T Thermocouple Extension Wire Kit, 3M Max. 260°C 95B1781 40.20

THERMOCOUPLE MODULES FOR USE WITH MULTIMETERS

80TK Type-K Thermocouple Module with Mfg.Part No. 80PK-1 Probe

–50° to +1000°C 46F8464 109.45

THERMOCOUPLE ADAPTERAdapts Type-K thermocouple mini-connector-to-dual banana plug inputs. Measurement range and accuracy: probedependent. Suitable for low voltage applications (below 30V AC, 60V DC).

Mfg. Part No. Description Stock No. Price Each80AK-A Type-K Thermocouple Adapter 55M2589 20.60

Mfg. Part No. Description Stock No. Price EachFLUKE-561 Infrared and Contact Thermometer 83K1733 161.00FLUKE 566 Infrared and Contact Thermometer with Dot Matrix Display 64M6508 379.00FLUKE 568 Infrared and Contact Thermometer with Dot Matrix Display 64M6509 499.99

Mfg. Part No. DescriptionMeasurement

Range Stock No.PriceEach

80PK-22 SureGrip Type-K Immersion TemperatureProbe

-40° to 1090°C 88H4051 72.95

80PK-24 SureGrip Type-K Air Temperature Probe -40° to 816°C 02J7902 91.2080PK-25 SureGrip Type-K Piercing Temperature Probe -40° to 350°C 02J7903 85.1580PT-25 SureGrip Type-T Piercing Temperature Probe -196° to 350°C 02J7905 85.1580PK-26 SureGrip Type-K Tapered Temperature Probe -40° to 816°C 02J7904 91.2080PK-27 SureGrip Type-K Industrial Surface

Temperature Probe -127° to 600°C 97H6105 242.15

(88092)

Mfg. Part No. Description Stock No. Price EachFLUKE-51-2 60HZ Single-Input Thermometer 95B1678 222.00FLUKE-52-2 60HZ Dual-Input Thermometer 95B1685 269.00FLUKE-53-2 60HZ Single-Input Thermometer w/Recording 95B1687 320.00FLUKE-54-2 60HZ Dual-Input Thermometer w/Recording 95B1692 369.00

ACCESSORIES

FVF-SC1 FlukeView® Forms Software 24C4883 187.15

FLUKE-560 SERIES INFRAREDAND CONTACT THERMOMETERS

(5348)

(48585)

80 SERIES TEMPERATURE PROBESAND ACCESSORIES

FLUKE 50 SERIES IITHERMOMETERS ANDACCESSORIES

• IR thermometer for quick measurements up close or at a distance• Single-point laser sighting• Contact thermometer for use with mini-connector K-type thermocouples (not included)• Temperature range, -40 °C to 550 °C (-40 °F to 1022 °F)• Easy emissivity adjustment for measuring pipes and ducts more accurately• Efficient — no need to shut down equipment when making IR measurements• MIN/MAX and DIF functions help identify problems quickly• Scan large areas or small objects quickly and efficiently• Recommended accessories – H6 Holster, 80PK-27 Temperature Probe, 80PK-8 Temperature Probe

DUAL INPUT THERMOMETER

With the easy-to-use, lightweight mfg. part no. Fluke-561 HVACPro IR thermometer, take contact and ambienttemperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized andhard-to-reach objects instantly. Check motors, insulation, breakers, radiant heating, pipes, corroded connections andwires. Plus, scan ducts from the floor — leave the ladder in the truck! Includes Velcro® pipe probe for superheat/sub-cooling and other contact and ambient measurements and a users manual. Can be plugged in any industry-standardK-type mini-connector thermocouple probes, ordered separately; go online or call.

FEATURES:

The rugged, hand-held, Fluke 50 Series II thermometers have extra large dual displays with bright backlights. Theyoffer fast response and a basic accuracy of ±0.05% +0.5°F, and a wide measurement range from -418°F to 3212°F(depending on thermocouple type). Readings can be displayed in °C, °F or Kelvin. Mfg. part no. FVF-SC1 FlukeviewForms Software allows you to document, store and analyze measurements from Fluke 53-2, 54-2 and 189 DMM. Mfg.part nos. 53-2 and 54-2 are thermometers. Mfg. part no. 189 is a DMM. Download data. Real-time logging. Createcustom forms, reports, graphs and tables.

SureGrip™ temperature probes are designed to provide a reliable grip in slippery hands. Soft rubber handle combinedwith a new ergonomic design.

• Compatible with K and J typethermocouples

• Dual temperature for easy Super-Heat and Sub-Cool calculations

• Data Hold function to retainreading on the screen for laterviewing

• Min/Max recording• Selectable °F or °C

SUREGRIP™ TEMPERATURE PROBES

Fluke-561 IR Thermometer:

• Rugged Design with Holster• K, J, T, E-Type Thermocouple Compatibility• Hold / MIN / MAX / AVG Recording• Relative Time Stamp• Electronic Offset Minimizes Thermocouple Error• Dual Display with Backlight• User Friendly Front Panel Set-Up• Readout in °C, °F or Kelvin (K)• 3-Year Warranty• Recommended accessories - C50 Case, TPAK

Meter Hanger, 80PK-27 Temperature Probe

SPECIFICATIONS:

Fluke-566 and Fluke-568:

TEMPERATURE PROBES FOR USE WITH MULTIMETERS

51-2

80PK-8

Fluke 53 and 54 Additional Features

• Measure -40 °C to 800 °C /-40 °F to 1472 °F Fluke-568 or -40 °C to 650 °C/-40 °F to 1202 °F Fluke-566• Easily access advanced features with the soft-key buttons and graphical display• Measure objects from further away, with a distance-to-spot ratio of 50:1 Fluke-568 or 30:1 Fluke-566• Compatibility with all standard miniconnector K-type thermocouples • Measure a wide variety of surfaces with adjustable emissivity feature, including a built-in material table• Capture up to 99 points Fluke-568 or 20 point Fluke-566 of data, for downloading and recalling later• Easily trend and analyze data with included FlukeView® Forms software Fluke-568• Use USB Fluke-568 and your laptop for“Hands-free” datalogging• Troubleshoot equipment with 1% measurement accuracy• Versatile interface six languages from which to choose• Two-year manufacturer’s warranty

80TKFluke-561

• Data Logging Up to 500 Points with User Adjustable Intervals• Additional Thermocouple Type Inputs• Real Time Clock• IR Communication Port Allows Data to Be Exported to Optional FlukeView® Software

Fluke-568


2246

9


IR THERMOMETERS • TEMPERATURE & HUMIDITY


VIEW BAROMETRIC PRESSURE,TEMPERATURE + HUMIDITYWITH A WEB BROWSER

RELATIVE HUMIDITYTEMPERATURE METER

DUAL INPUT THERMOMETER (CONT.)

Mfg. Part Nos. TMD10Weight 150 g (5.29 oz)Temperature Storage range -25 °C to 70 °C (-13 °F to 158 °F)Temperature Operation range 0 °C to 40 °C (32 °F to 104 °F)Operating altitude (ISO 9022) up to 3500 mStorage humidity (at 35 °C) maximum 85% for 24 hBatteries AAA (2)

Specifications Range AccuracyHumidity 0 % RH to 100 % RH

5 % RH to 95 % RH: <5%RH, >95% RH

±3 % RH @ 23 °C±5 % RH @ 23 °C

Temperature Coefficient ... 0.1 x specified accuracy/ °C <23 °C, >23 °CResolution 0.1 %RH ...Temperature (Dry Bulb) -20 °C to 60 °C:

-4 °F to -140 °F±0.8 °C±1.6 °F

Dew Point (DP) -20 °C to 60 °C:-4 °F to -140 °F

±0.8 °C±1.6 °F

Web Bulb (WB) -20 °C to 60 °C: -4 °F to -140 °F

±0.8 °C±1.6 °F

Resolution 0.1 °C/0.1 °F ...

Mfg. Part No. Description Stock No. Price EachTMD10 Dual Input Thermometer 11P0033 99.95

Specifications Range AccuracyTemperature display 0.2 °C or 0.5 °F ...Targets

– 1 °C to 400 °C (30 °F to 750 °F) – 18 °C to – 1 °C (0 °F to 30 °F)

± 2 % of reading or ± 2 °C(±3.5 °F), whichever is greater

± 3 °C (± 5 °F) at 23 °C(73 °F) ± 2 °C (± 3.5 °F)

Repeatability ... ± 2 % of reading or± 2 °C (± 3 °F)

Response Time 500 mSec, 95 % response ...Spectral Response 7 to 18 µm ...Ambient OperatingTemperature

0 °C to 50 °C (32 °F to 120 °F) ...

Relative Humidity 10 % to 95 % RH non condensing, @up to 30 °C (86 °F) ...


THWD-3 Relative Humidity Temperature Meter 58M2681 119.95

Mfg. Part No. Description Stock No. Price Each

ITHX-M iServer MicroServer for Temp + Humidity with 8″ Wand probe,LCD display 2M bytes Memory Card, Universal power adaptor

73J4828 395.00

ITHX-M-5/N iServer MicroServer for Temp + Humidity with 5″ Industrial probe 10 ft cable

05R6340 420.00

ITHP-W-6 Replacement Wand Probe 8″ (203mm), cable 6″ (152mm) with DB9 Connector

05R6337 100.00

ITHP-2-DB9 Replacement Industrial Probe 2″ (51mm), cable 3 ft (0.9m) with DB9 Connector

05R6338 115.00

ITHP-5-DB9 Replacement Industrial Probe 5″ (137mm), cable 10 ft (3m) with DB9 Connector

05R6339 125.00

ITH-MC8 Memory Data Flash Card, 8M bytes 05R6369 44.40

Mfg. Part No. Description Stock No. Price EachIR608A Infrared Thermometer 55M0777 79.95


EachIBTX-W/N Virtual Chart Recorder for Barometric Pressure and

Temperature, Includes universal (100-240 Vac) power adaptor, Wand Probe, 6″ cable

46P4845 295.00

IBTX-D DIN Rail Virtual Chart Recorder for Barometric Pressure andTemperature, Includes Industrial 5″ Probe, cable 10 ft withStripped Wire Leads. DC powered

05R6494 295.00

IBTHX-W Virtual Chart Recorder for Barometric Pressure,Temperature, Humidity and Dewpoint, includes universal (100-240 Vac) power adaptor, Wand Probe, 6″ cable

60K8768 395.00

IBTHX-D DIN Rail Virtual Chart Recorder for Barometric Pressure,Temperature, Humidity and Dewpoint. Includes Industrial 5″Probe, cable 10 ft with Stripped Wire Leads. DC powered

05R6493 395.00

IBTHX-W-5 Virtual Chart Recorder for Barometric Pressure,Temperature, Humidity and Dewpoint, includes universal (100-240 Vac) power adaptor, Industrial 5″ Probe, 10 ft cable with DB9 connector

46P5500 420.00

IBTX-M Virtual Chart Recorder for Barometric Pressure and Temperaturewith LCD Display, includes 2Mbytes Flash Memory Card, 2 Relay Alarm, Battery Back-up, and universal (100-240 Vac) power adaptor, Wand Probe, 6″ cable

05R6495 395.00

ITH-MC8 Memory Data Flash Card, 8M byte / 4 Years @ 1 minute Intervals (iBTX-M)

05R6369 44.40

IDRN-PS-1000 Power Supply (switching), 95 to 240 Vac input, 24Vdc output @ 850mA, Required for iBTX-D and iBTHX-D

85C2407 150.00

(135632)

(147133) (147113)

(147122)

(147131)

INFRAREDTHERMOMETER

Mfg. part no. THWD-3 uses a precision capacitance sensor todeliver accurate performance with long term stability. This highaccuracy instrument measures the full range of relative humidityfrom 0% to 100% and features an exceptionally wide ambienttemperature measurement range from -20 °C (-4 °F) to 60 °C (140°F). THWD-3 comes with soft carrying case, sensor cover, batteryinstalled and user’s manual.

Monitor and record Temperature and Relative Humidity overan Ethernet network or the Internet with no special softwareexcept a Web browser. The iTHX-M serves Active WebPages to display real time readings, display charts oftemperature and humidity, or log data in standard dataformats for use in a spreadsheet or data acquisition pro-gram such as Excel or Visual Basic. Store the data locallyusing a removable flash memory card. This data storagecan go for years and can be retrieved over the Ethernet orthe Internet. Flash memory cards of 2, 4, or 8 Mbytes can beused. If temperature or/and humidity exceeds the iTHX-Mcan trigger an alarm that can be sent by email to an Internetenabled pager or cell phone.

• Virtual Chart Recorder• Web Server• Email Alarms• Data Logging• No Special Software Required

ITHX-M TRANSMITTER ANDRECORDER MONITOR ANDRECORD TEMPERATURE +HUMIDITY WITH A WEB BROWSER

FEATURES:

The NEWPORT® iBTHX monitors and records Barometric Pressure, Temperature, Relative Humidity and Dew Point overan Ethernet network or the Internet with no special software except a Web Browser. The NEWPORT iBTHX serves ActiveWeb Pages to display real time readings, display charts of barometric pressure, temperature and humidity or log data instandard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic. The virtualchart viewed on the web page is a JAVA™ Applet that records a chart over the LAN or Internet in real time. The modeliBTX-M with LCD display, adds several valuable features in addition to the backlit local display of temperature andbarometric pressure. The “Memory” model, iBTX-M comes complete with a removable 2 Megabyte Flash Memory cardthat can store one full year of readings taken at one minute.

• Dual display• Extended probe stem to easily

access air ducts• Dew Point• Wet Bulb• Min/Max readings• Data Hold• Auto Power off• One-year warranty

• Comfortable pistol grip design• Small enough to fit in your pocket• Measuring range – 18 °C to 400 °C (0

°F to 750 °F)• Fixed emissivity at 0.95• Laser sighting for accurate targeting

(CE EN60825 certified Class II)• Display hold• Fast response time• Distance to spot size ratio 8:1• Accuracy to 2%• Backlit display• Battery included



9


TEMPERATURE & HUMIDITY



1-472-2060 Single Input 92F5409 77.0772-2065A Dual Input 73C8088 86.95


1-9 10-24EL-USB-2-LCD RH/Temperature/Dew Point USB Data Logger with

LCD Display13P0588 106.95 104.04


1-472-2061 Bead Probe 84N2123 17.1072-2062 Immersion Probe 50N1356 51.3072-2063 Surface Probe 50N1357 85.50

(137186)


1-9 10-24EL-USB-RT Real-Time Temperature/RH/Dew Point USB Data Logger 39P9593 78.75 77.07


EachITHX-2/N iServer MicroServer for Temp + Humidity, with 5″

Industrial Probe, 10 ft cable. Two Channel Capability, includes universal ac powor adapter

05R6342 295.00

ITHP-2 Industrial Probe 2″ (51mm),cable 3 ft (0.9m)

05R6296 115.00

ITHP-5 Industrial Probe 5″ (137mm),cable 10 ft (3m)

05R6297 125.00

IDRN-PS-1000/N Power Supply (switching), 95 to 240Vac,24V output @ 850 mA

91F9168 150.00

(137189)

(28367)

(147115)

• 0 to 100% RHmeasurement range

• -35° to +80°C (-13° to+176°F) measurementrange

• Dew point indication viaWindows® controlsoftware (included)

• USB interface for set-upand data download

• Stores up to 16,379 RH

SINGLE- AND DUAL-INPUTDIGITAL THERMOMETERS


ITHX-W/N iServer MicroServer for Temp + Humidity, with 8″ Wand Probe,Two Channnel Capability, includes universal ac power adapter.

80K8263 295.00

ITHX-W-5/N iServer MicroServer for Temp + Humidity, with 5″ industrial Probe,10 ft cable. includes universal ac power adapter.

05R6341 320.00

ITHP-W-6 Replacement Wand Probe 8″ (203mm), cable 6″ (152mm) with DB9 connector

05R6337 100.00

ITHP-2-DB9 Industrial Probe 2″ (51mm), cable 3 ft (0.9m) with DB9 connector

05R6338 115.00

ITHP-5-DB9 Industrial Probe 5″ (137mm), cable 10 ft (3m) with DB9 connector

05R6339 125.00

DB9-Y DB9 ″Y″ Connector adaptor for 2probes with DB9 connector

05R6335 37.00

DB9-CA-3 Extension Cable, 3 ft (0.9)with DB9 connector

05R6334 19.43

The NEWPORT® i®THX-2 transmitter let’s you monitor and record Temperature, Relative Humidity and Dew Point overan Ethernet network or the Internet with no special software except a Web browser. The NEWPORT iTHX-2 Active WebPages to display real time readings, display charts of temperature and humidity, or log data in standard data formats foruse in a spreadsheet or data acquisition program such as Excel or Visual Basic. The JAVA™ Applet chart scales are fullyadjustable on the fly. For example, the chart can display one minute, one hour, one day, one week, one month or oneyear. Users can select channel 1, channel 2 or the difference of the two channels. Temperature and humidity can becharted across the full span (-40 to 124°C, and 0-100% RH) or within any narrow range such as (20 to 30°C). TheiTHX-2 transmitters come complete with a humidity + temperature probe for measurement of a single location. With theaddition of a second probe, the transmitter can measure and display humidity + temperature and dew point in a secondlocation up to twenty feet away. The transmitter can display and chart absolute measurements in both locations, or adifferential measurement between the two locations. The second probe requires no change to the basic iTHX-2transmitter hardware, firmware or software. A second probe can be added at the time of purchase or in the future.NEWPORT offers a choice of industrial probes in 2 inch and 5 inch.

and 16,379 temperature readings• Programmable sample rates: 10 sec., 1min., 5min., 30min., 1hr., 6 hr., 12 hr.• User-programmable alarm thresholds• Red and green LED status indication• High-contrast 2.5 digit LCD display shows RH, temperature, hi/low and last readings• Immediate, delayed and push-to-start logging• Replaceable lithium battery (included)

• Data displayed on PC monitor as it happens— real-time

• -20° to +70°C (-4° to +158°F) measurementrange

• 0 to 100% RH measurement range• Dew point indication via Windows® control

software (included)• USB interface for set-up and data download• User-programmable alarm thresholds• Powered by the USB

Mfg. part no. EL-USB-RT real-time data logger is easy to install and use. The user can measure temperature andrelative humidity and view downloaded data by plugging the logger into a PC’s USB port and using the suppliedWindows® control software (runs under 2000, XP and Vista). The PC displays the temperature, RH and dew point inreal-time and saves it to a file which can store up to seven day’s worth of data. This data file is overwritten at thebeginning of each new logging session. The supplied software provides the option for the user to save the data filepermanently to the hard-drive. Temperature, relative humidity and dew point can be graphed, printed and exported toother applications.

(147114)

Specifications:Digital thermometers have a temperature measuring range of –58°F to +2000°F. 2.5 readings per second. Comescomplete with holster and manual. 9V battery included.

Mfg. part no. EL-USB-2-LCD standalone data logger is easy to set up, install and use. The user can view downloadeddata by plugging the logger into a PC’s USB port and using the supplied Windows® control software (runs under 2000, XPand Vista). Relative humidity, temperature and dew point data can then be graphed, printed and exported to otherapplications. The high-contrast LCD shows a variety of temperature and humidity information. Six different functions areavailable, which can be cycled through using the built-in push button. The most recent logged value, maximum andminimum logged stored values can be displayed separately for RH and temperature. Data rollover feature allowsunlimited logging periods by overwriting the oldest data when the memory is full.

RH/TEMPERATURE/DEW POINTUSB DATA LOGGER WITH LCDDISPLAY

72-2065A

ITHX-W TRANSMITTER VIEWTEMPERATURE + HUMIDITYWITH A WEB BROWSER

REAL-TIME TEMPERATURE/ RH/DEW POINT USB DATA LOGGER

ITHX-2 TRANSMITTER VIEWTEMPERATURE + HUMIDITYWITH A WEB BROWSER

K-TYPE THERMOCOUPLE

The NEWPORT® i®THX-W transmitter let’s you monitor and record Temperature, Relative Humidity and Dew Point overan Ethernet network or the Internet with no special software except a Web browser. The NEWPORT iTHX-W serves ActiveWeb Pages to display real time readings, display charts of temperature and humidity, or log data in standard dataformats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic. The JAVA™ Applet chartscales are fully adjustable on the fly. For example, the chart can display one minute, one hour, one day, one week, onemonth or one year. Users can select channel 1, channel 2 or the difference of the two channels. Temperature andhumidity can be charted across the full span (-40 to 124°C and 0-100%RH) or within any narrow range such as (20 to30°C). The iTHX-W transmitters come complete with a humidity + temperature probe for measurement of a singlelocation. With the addition of a second probe, the transmitter can measure and display humidity + temperature and dewpoint in a second location up to twenty feet away. The transmitter can display and chart absolute measurements in bothlocations, or a differential measurement between the two locations. The second probe requires no change to the basiciTHX-W transmitter hardware, firmware or software except for a simple “Y” connector. A second probe can be added atthe time of purchase or in the future. NEWPORT offers a choice of industrial probes in 2 inch and 5 inch (51mm and137mm) lengths, and a wand style for ambient indoor applications.

Common Features:• 31⁄2 Digit LCD• Select °C or °F • Mfg. Part No. 72-2060: 0.1°C or 1.0°C• Mfg. Part No. 72-2065 : 1.0°C• K-Type Thermocouple (4′ Bead Probe Included)• Resolution: 0.1°C, 0.1°F• Reading Hold• Maximum Record

Mfg. Part No. 72-2065A Exclusive Features:• Dual Thermocouple Input• Differential Temperature T1, T2, T1 - T2• 2 K-Type Thermocouples

ACCESSORIES


2248

9


MANOMETERS • CHART RECORDERS & DATA LOGGERS • AIR QUALITY


Mfg. Part No. Description Stock No. Price EachFLUKE-983 Particle Counter 73J7957 4495.00


CTXL-TRH-W/N White temperature/relative humidity recorder with 2built-in relays

78M5240 795.00

CTXL-TRH-G/N Gray temperature/relative humidity recorder with 2 built-inrelays

01P0087 795.00

CTXL-DTC-W/N White dual thermocouple input recorder with 2 built-inrelays

05R2260 795.00

CTXL-DTC-G/N Gray dual thermocouple input recorder with 2 built-inrelays

05R2259 795.00

CTXL-DPR-W/N White dual-process recorder with 2 built-in relays 05R2258 795.00CTXL-DPR-G/N Gray dual-process recorder with 2 built-in relays 05R2257 795.00CTXL-CABLE-6 1.8 m (6’) extension cable 78M5242 22.20CTXL-CABLE-10/N 3.05 m (10’) extension cable 05R2256 37.00CT485-CDF/N 100 Charts, 1 day°F, double sided 92F6587 26.22CT485-CWF/N 100 Charts, 7 day°F, double sided 92F6589 26.22CT485-CMF/N 100 Charts, 32 day°F, double sided 93F9241 26.22

Mfg. Part No. Description Stock No. Price EachMAN02 Manometer 11P0025 179.95

Mfg. Part Nos. THWD-5Range RH: 0 to 100%

Temperature: 14 to 140 °FDP: -100 to 139.8 °FWB: 7.88 to 139.8 °F

Accuracy RH: ±3% from 10 to 90% at 25°C and ±5% for othersTemperature: ±1 °F

Response Time 60 secondsResolution 0.1 °FDimension 175 x 69.85 x 33 mmOperating Temperature 32 to 122 °FDimension 175 x 69.85 x 33 mm

Mfg. Part No. Description Stock No. Price EachCO250 Portable Indoor Air Quality CO2 Meter/Datalogger 69P2496 379.99

Mfg. Part No. Description Stock No. Price EachTHWD-5 RH/Temperature Meter 11P0031 139.95

(147088)

(135691)

Mfg. Part No. Description Stock No. Price EachRH520A Humidity + Temperature Chart Recorder 02P7937 249.99

FLUKE-983 PARTICLE COUNTERAND FLUKE CO-220 CARBONMONOXIDE METER

MANOMETER

(135710)

MICROPROCESSOR-BASEDPORTABLE UNIVERSALCIRCULAR CHARTSUPERECORDERS

(148530)

(148523)

Mfg. part no. RH520A is easy to use, set up and operate. LCD indicates percentage of memory remaining. Audible andvisual alarm with Hi/Low setpoints. Replaceable probe does not require recalibration. Audible and visual alarm withHi/Low setpoints. Desk or wall mount. Includes built-in stand, detachable probe with 3ft. (1m) cable, RS232 cable,RS-232 To USB adaptor, LabView-based PC software, adaptor, and 3 AA batteries.

PORTABLE INDOOR AIRQUALITY CO2 METER/DATALOGGER

RELATIVE HUMIDITY/TEMPERATURE METER

Quickly and accurately measure particle concentrations in the air. Particle data is important in mold remediation, particlesource identification, and filter testing. Mfg. part no. FLUKE-983 is invaluable for plant maintenance and utilitytechnicians, HVAC-service contractors, and industrial hygienists who assess indoor air quality (IAQ). Lightweight andaccurate in any position, mfg. part no. FLUKE-983 has a six-channel particle size display and extensive data-loggingcapacity, making it the perfect tool for monitoring problem areas. Includes: Certificate of Calibration (NIST), Windows®

compatible software download utility, DB9-to-RS-232 adapter and cable, isokinetic probe, high-purity tubing, 1⁄8 in.hose barb adapter, power supply, zero-count filter, operation manual, and molded plastic case.

FEATURES:

The CTXL-TRH is a temperature/ relative humidity chart recorder with a temperature range of -17 to 49##Undef-Tag-786##C (2 to 120##UndefTag-786##F), and a humidity range of 2 to 98%. The CTXL-DTC is a dual thermocoupleinput chart recorder that accepts J, K, or T Type thermocouple probes. The CTXL-DPR is a dual-process input chartrecorder that accepts 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc, 0 to 20 mA, and 4 to 20 mA inputs. Models have dual backlitLCDs that display two inputs in real-time. The charted data is stored in the nonvolatile memory that can be downloadedto a PC at a later time. This provides an electronic copy of the charted data. In addition, the CTXL Series provides manypowerful functions such as audible and visual alarms with built-in relay contacts; real time clock to monitor and storedata vs. time; monitoring of the Minimum, Maximum, and Average values; 1, 7, or 32-day recording; chart re-scaling,and more.

FEATURES:

• Backlit LCD with Six Particle Size (0.3, 0.5,1.0, 2.0, 5.0, 10.0µm) Display

• 5000 Sample Record Capacity• Selectable Sample Time, Count Data,

Programmable Delay• Concentration, Totalize, and Audio

Counting Modes• Built-In RH and Temp• Rechargeable NiMH Battery Providing Up

to 8 Hours Continuous Operation• Low Battery Alarm

Mfg. part no. CO250 measures carbon dioxide (C02), temperature,humidity, dew point, and wet bulb. User programmable auduble alarm.Built-in RS-232 interface for capturing readings on PC. Includessoftware and cable, 4 AA batteries, and carrying case. CE compliant.

• Constant voltage or current• • 3 selectable ranges:• - 0 to 16V/0 to 5A• - 0 to 27V/0 to 3A• - 0 to 36V/0 to 2.2A• • 4-Digit LED displays• • Front/Rear output terminals• • Remote sensing for accurate applied voltage at load

point• • Compact slim tower housing is ideal for tight work

bench• • Lightweight for easy portability• • Complete with AC Power cord

• Reads gauge and differential pressure• Five selectable units of measure: InH2O, psi,

mbar, bar, mmH2O• Ideal for measuring HVAC/R pressure levels• Also used for Pneumatic controls• Offers Maximum and Minimum value

recordings, Data Hold• Auto power off function, Large backlight LCD

SPECIFICATIONS:

• Calculates statistical weighted averages of TWA (8 hourtime weighted average) and STEL (15 minute short termexposure limit)

• Maintenance free NDIR (non-dispersive infrared) CO2sensor

• Measurement ranges:CO2: 0 to 5,000ppmTemperature: 14 to 140°F (-10 to 60°C)Humidity: 0.0 to 99.9%

• User programmable audible alarm• Backlit triple LCD display• One year warranty

HUMIDITY AND TEMPERATURECHART RECORDER

FLUKE-983

• Four measurements in one meter• Relative Humidity, Temperature, Dew Point and Wet Bulb• Extended probe for easy target access• Large digital dual display with backlight• Measure both relative humidity and temperature together• Temperature in °C or °F, front panel selectable• 0.1 degree resolution for temperature• Minimum and Maximum measurements stored• Data Hold to freeze last measurement reading• Tripod mountable

• Range: 0 to +/-2 Psi• Accuracy: +/- 0.3% full scale at 77 °F• Response Time: 0.5 second• Resolution: per 0.401 in of H2O• 0.001 per 0.0145 Psi• 0.1 per mbar• Operating Temperature: 32 to 122 °F

SPECIFICATIONS:

FLUKE CO-220 CARBON MONOXIDE METER AND ACCESSORIESMfg. part no. FLUKE CO-220 carbon monoxide meter measures CO levels from 0 to 1000ppm, with an audible signaltriggered more frequently as CO levels rise. Used to detect dangerous CO leaks. Mfg. part no. FLUKE CO-220 respondsvery quickly to ambient changes in carbon monoxide concentration without the use of a pump. Perfect for professionalswho need to measure CO levels where the accumulation of combustion gas is possible. Mfg. part no. FLUKE CO-210



9


AIR QUALITY • ANEMOMETERS • GAS LEAK DETECTORS


FLUKE-983 PARTICLE COUNTER AND FLUKE CO-220 CARBON MONOXIDEMETER (CONT.)

(148853)

Mfg. Part No. Description Stock No. Price EachFLUKE-922 Airflow Meter 38M9737 469.99FLUKE-922/KIT Airflow Meter Kit 89M0304 579.99

Mfg. Part No. Description Stock No. Price EachTMULD-300 Ultrasonic Leak Detector Kit 15B4483 399.95ULD-300 Ultrasonic Leak Detector Kit 15B4498 329.95

Mfg. Part No. Description Stock No. Price EachFLUKE CO-220 Carbon Monoxide Meter 26K2559 309.99FLUKE CO-205 Aspirator Kit 26K2557 109.99

(94365)

Specifications Range Resolution Basic AccuracyAir Velocity 0.4 to 30.00 m/s 0.01 m/s ±3% m/s

1.4 to 108.0 km/h 0.1 km/h ±3% km/h80 to 5906 ft/min 1 ft/min ±3% ft/min0.9 to 67.2 mph 0.1 mph ±3% mph0.8 to 58.3 knots 0.1 knots ±3% knots

Air Temperature 14 to 140°F (-10 to 60°C) 0.1°F/°C ±4.0°F(2.0°C)InfraRed Temperature -58 to -4°F (-50 to 20°C) 0.1°F/°C ±9.0°F(5°C)(Mfg. Part No. AN200 only) -4 to -500°F (-20 to 260°C) 1°F/°C ±2% reading or

±2°F(°C) whichever is greater

Airflow 0 to 9999 CMM (m³/min) 0.10 to 9999 CFM (ft³/min) 0.1

Mfg. Part No. Description Stock No. Price EachGSD600 Gas Leak Detector 11P0021 149.95

FLUKE 922 AIRFLOW METER

Mfg. Part No. Description Stock No. Price EachAN100 CFM/CMM Thermo-Anemometer 80K7606 149.99AN200 CFM/CMM Thermo-Anemometer + IR Thermometer 87K0998 199.99

(147135)

Specifications Range Resolution AccuracyAir Velocitym/s (meters per sec)

0.40 m to 25.00 m/s 0.01 m/s ± 2 % of full scale

scaleft/min (feet per minute) 125 ft to 4900 ft/min 1 ft/min ± 2 % of full scaleAir FlowCMS (cubic meters per sec)

0.01 m to 99.99 m3/sec 0.01 0 to 9.999 m

CFM (cubic feet per minute) 1 ft to 9999 ft3/min 1.0 0 to 9.999 ftAir Temperature°C (°F)

0 °C to 50 °C (32 to 122 °F) 0.1 °C/(°F) ± 0.8 °C (1.5 °F)

(135636)

(83701)

ULTRASONIC LEAKDETECTOR KITS

Mfg. Part No. Description Stock No. Price EachTMA10A Anemometer Thermometer 42M3497 204.95

GAS LEAK DETECTOR

• Powerful meter provides differential andstatic pressure, air velocity and flowreadings

• Convenient colored hoses help properinterpretation of pressure readings

• Bright, backlit display for clear viewing inall environments

• User-defined duct shape and size formaximum airflow accuracy

• Resolution down to 0.001 in H2O • 99 point data storage capacity • Min/Max/Average/Hold functions for easy

data analysis • 2 year warranty

(91358)

FEATURES:

Mfg. part no. TMULD-300 detects any pressurized gas leakregardless of type CFC’s, HFC’s, Nitrogen, etc. and is unaf-fected by contaminants. Mfg. part no. TMULD-300 kitincludes UT-300 ultrasonic transmitter, flexible tubing adap-ter, extension tube, parabola (reflector) and headphones.Mfg. part no. ULD-300 kit includes headphones, extensiontube and parabola (reflector).

CFM/CMM THERMO-ANEMOMETER+ IR THERMOMETER

(147139)

• UT-300 transmits an ultrasonic signal for nonpressurized applications

• Tests the “air-tightness” of weather seals,tanks, ovens, refrigerators, etc.

• Locating leaks in duct work • Finds the ends of buried PVC pipes

ANEMOMETERTHERMOMETER

• Detects Methane and Propane gas• Quickly identifies and pinpoints gas

leaks• Automatic calibration feature• 5 level LED alarm: >40, >80,

>160, >320, and >640 ppm• Flexible probe to access difficult

measurement areas• Auto Power Off

• Measures remote surface temperatures to500°F (260°C) with 8.1 distance to spot ratioand Laser Pointer (mfg. part no. AN200 )

• Simultaneous display of Ambient Temperatureand Air Flow or Air Velocity

• 3% velocity accuracy via low friction2.83″D(72mm) ball-bearing vane wheel on 3.9ft(120cm) cable

• Data Hold and MIN/MAX• One year warranty

SPECIFICATIONS:

Complete with vane sensor with 3.9 ft (120cm) cable 9V battery, protective rubber holster and carrying case.

Mfg. Part No. TMULD-300 Features:

Mfg. part no. TMA10A offers numerous functions use it to check air velocity FPM (Feet per minute), air volume (flow)CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Ideal for HVAC/Rtechnicians measuring heat/ventilation/ air conditioning/refrigeration wind flow and temperature in commercial andindustrial air conditioning systems. Includes TMA10A anemometer with remote vane and cord, deluxe hard plasticcarrying case, battery (installed) and user’s manual.

SPECIFICATIONS

• Sensor: Semiconductor• Response Time: < 10 seconds• Warm up time: < 60 seconds• Operating Temperature: -5°C ∼ 45°C / 23°F ∼ 113°F• Auto Power Off: 10 minutes after last key pressure

• Measure CFM by inputting the ventdimensions

• Obtain air flow average by takingup to eight data points

• Vane has three foot cord formeasurement flexibility

• Deluxe carrying case

Mfg. Part No. ULD-300 Features:• Identifies failing solenoids, valves and bearings • Battery, audible and visual leak indicators

carbon monoxide probe, a stand-alone device or an accessory to a digital multimeter with DC millivolt inputs, displaysCO level readings from 0 to 999ppm, with a resolution of 1ppm. Mfg. part no. FLUKE CO-205 aspirator kit contains allthe components necessary for providing a clean sample for the Fluke® family of gas measuring devices.


2250

9


LIGHT METERS • SOUND LEVEL METERS


(148862)

Mfg. Part Nos. LM-100 LM-120Illumination Accuracy at 23°C ± 5°C (73.4°F ± 5°F), <

75% R.H.Accuracy at 23°C ± 5°C (73.4°F ± 5°F), <

75% R.H.Sensor Silicon photodiode and filter Silicon photodiode and filterMeasurement rate 2.5 times per second 2.5 times per secondRange 20, 200, 2000, 20000, 200000 Lux

20, 200, 2000, 20000 Foot candles20, 200, 2000, 20000, 200000 Lux20, 200, 2000, 20000 Foot candles

Accuracy ± 3% (Calibrated to standardincandescent lamp at 2854°K)6% other visible light sourcesAngle deviation from cosine

(Characteristics)30° (± 2%)60° (± 6%)80° (± 25%)

Cosine Angular corrected per JIS C1609:1993 and CNS 5119 general A class

± 3% (Calibrated to standardincandescent lamp at 2854°K)6% other visible light sourcesAngle deviation from cosine

(Characteristics)30° (± 2%)60° (± 6%)80° (± 25%)

Cosine Angular corrected per JIS C1609:1993 and CNS 5119 general A class

Mfg. Part No. Description Stock No. Price EachLM-100 Light Meter 11P0023 94.95LM-120 Light Meter 11P0024 119.95

Mfg. Part Nos. SM-10 SM-20Display 4 digits LCDMicrophone 1/2 inch Electret condenser microphonePower Supply 9V NEDA 1604, IEC 6F22, JIS 006P batteryPower Life Approx. 50 hrs (alkaline Battery)Auto Power Off Approx. 5 minTemperature / Humidity 41°F to 104°F; < 80% RHDynamic range 50 dBResolution 0.1 dB, Display Update: 0.5 sec.Time weighting FAST(125mS), SLOW(1 sec)Frequency range 31.5 Hz to 8 kHzMeasuring level range (Auto Range)

A Weighting: 30 to 130 dBC Weighting: 35 to 130 dB

Accuracy ± 1.5 dB

(135679)

Mfg. Part No. Description Stock No. Price EachSM-10 Sound Meter 11P0027 149.95SM-20 Sound Meter 11P0028 349.95

LIGHT METERS

(135703)

FEATURES:

SOUND METERS

FEATURES:

• Measure in Lux or Footcandles, frontpanel switchable

• Silicon photodiode sensor and filter• Data Hold to freeze reading on the

digital display• MIN / MAX ability to show high and

low readings• Auto Power Off to save battery life• Includes protective sensor cap• Large, 3-1/2 digit display

• Data Hold to freeze reading on digital display• MAX/MIN recording• Slow (1 sec) and fast (125ms) response settings to

check peak and average noise levels• Display with 0.1dB steps on a 4 digit LCD

SPECIFICATIONS:

SPECIFICATIONS:

LM-100

SM10 and SM-20 sound level meters are designed to meet themeasurement requirements of safety engineers, health, indus-trial safety offices and quality control in various environments.Each offers two types of measurements: A and C weighting. TheA weighting is for general noise sound level and the C weightingis for measuring sound level of acoustic material control invarious environments. Both include windscreen, user manual,9V battery and carrying case.

LM-120

SM-10 SM-20



9

Find the Latest Technologies Online MECHANICAL TEST EQUIPMENT

CALIPERS, MICROMETERS, & DIAL INDICATORS


DIAL AND ELECTRONIC INDICATORS (CONT.)

Mfg. Part No. Description Stock No. Price Each500-196-20 6″/150mm Digimatic Caliper 73K0564 141.00500-197-20 8″/200mm Digimatic Caliper 81K9215 199.00500-193 12″/300mm Digimatic Caliper 81K9213 390.00

WITH OUTPUT

500-171-20 6″/150mm Digimatic Caliper 81K9203 163.00500-172-20 8″/200mm Digimatic Caliper 81K9204 214.00500-173 12″/300mm Digimatic Caliper 81K9205 455.00


1-24TL11016 6″ Digital Caliper 01N3623 13.85

(88527)

Mfg. Part No. Description Range Graduations Stock No. Price EachST436.1AXRLZ 0-3 inch Mic Set-Outside 0-3″ .0001″ 85K3633 492.00ST436.1CXRLZ 0-6 inch Mic Set-Outside 0-6″ .0001″ 85K3637 1198.00

DEPTH MICROMETER

445AZ-6RL Ratchet Stop, Lock Nut, Case 0-6″ .001″ 85K5394 244.00446AZ-6RL Ratchet Stop, Lock Nut, in Case 0-6″ .001″ 85K5415 368.00449AZ-6R Non-Rotating Blades 0-6″ .001″ 85K5425 285.00

INSIDE MICROMETER

124BZ Solid Rod Inside Mic 2-12″ 2-12″ .001″ 85K4353 251.00124DZ Solid Rod Inside Mic 2-32″ 2-32″ .001″ 85K4357 649.00823BZ Tubular Inside Mic 1 -1/2-12″ 1.5-12″ .001″ 85K7114 303.00823FZ Tubular Inside Mic 1-1/2-32″ 1.5-32″ .001″ 85K7118 581.00

Mfg. Part No. Description Range Stock No. Price Each120-12 Slide Caliper, White Dial, without Case 0-12″ 85K4294 299.00120A-6 Slide Caliper, White Dial, in Fitted Plastic Case 0-6″ 85K4296 162.001202-12 Slide Caliper, White Dial, in Fitted Case 0-12″ 85K4317 266.001202-6 Slide Caliper, White Dial, in Fitted Case 0-6″ 85K4319 129.00

ELECTRONIC CALIPERS

797B-6/150 IP65 Elect.Caliper with Output Fitted Plastic Case 0-6″ 85K6980 193.00797B-8/200 IP65 Elect.Caliper with Output in Fitted Plastic Case 0-8″ 73K3463 251.00797B-12/300 IP65 Elect.Caliper with Output in Fitted Plastic Case 0-12″ 85K6978 380.00799A-6/150 Electronic Caliper in Fitted Plastic Case 0-6″ 85K6986 140.00799A-8/200 Electronic Caliper in Fitted Plastic Case 0-8″ 85K6987 198.00799A-12/300 Electronic Caliper in Fitted Plastic Case 0-12″ 85K6985 372.00

(116704)

(88726)

(88730)

DIGITAL CALIPER

DIGIMATIC CALIPER WITH SET ANDFORGET TECHNOLOGY

Mfg. Part No.Graduations

(In.)Range(In.) Dial Reading Stock No. Price Each

25-141J .001 .250 0-50-0 85K4918 123.0025-441J .001 1.00 0-100 85K4991 123.0025-631J .0005 1.00 0-50 85K5002 142.0081-141J .001 .250 0-50-0 85K7021 123.0081-241J .001 .250 0-100 85K7053 123.00196A1Z .001 .200 0-100 85K4596 201.00196B1 .001 .200 0-100 85K4599 116.00711GCSZ .001 .030 0-15-0 85K6648 200.00

SLIDE CALIPERS

Mfg. Part No. Description Stock No. Price Each3600-5 Electronic Indicator Inch AGD Group2 (no output) 88K0944 150.003600M-5 Electronic Indicator mm AGD Group2 (no output) 88K0945 150.00

CONTACT POINT

PT06632/2 Contact Point for AGD Indicator 74K0511 11.40

• On/off, origin set, zero/ABS• Convenient thumb roller• Data output function, output models only• 20,000 hours battery life under normal

use• Resolution: .0005″/0.01mm (inch/metric),

0.01mm (metric)• Accuracy: ±.001″/0.02mm (6″ and 8″),

±.0015″/0.03mm (12″)

TL11016

MICROMETERS AND SETS

OUTSIDE MICROMETERS

SLIDE CALIPERS

• Manufactured from extra strong carbonfibre composites

• LCD, internal/external measurement• True mm/inch conversion• Lightweight and durable

(88718)

NON-OUTPUT

1202-12

DIAL AND ELECTRONICINDICATORS

DEPTH MICROMETER FEATURES:• Ergonomically designed• All precision screws are ground and lapped• All bases and rods are hardened, ground, and lapped for

permanent accuracy• All reading surfaces have a satin chrome finish that

resists rust and provides a no-glare background for thesharp lines and figures

• All measuring rods are adjustable• Quick and easy adjustment

797 Series

Starrett indicators are made to American Gauge Design (AGD) specifications. The 25 series and 81 series indicatorshave a shockless, hardened steel gear train and jewel bearings. They are furnished with a lug-on-center back. The 196series is an accurate Universal Back-Plunger style indicator with 3 Contact Points. The 711 series Last Word® Indicatoris a small, jeweled, lever-action indicator, complete with all attachments.

799 Series

ELECTRONIC INDICATORS

INSIDE MICROMETER FEATURES:• Each rod marked with length• Hardened and ground anvils on rods, adjustable for

length. Head anvil is hardened and ground• Quick-reading figures – every thousandth numbered on

Inch reading tools• 124 series measuring rods are solid and assembled on

one side of the micrometer head • 823 series tubular measuring rods are lightweight, yet

extremely rigid

711 Series

OUTSIDE MICROMETER SETS FEATURES:

The 120 and 1202 series offer clear dial graduations of .001″ per revolution, sharp black graduations on the satinfinished bar every .100″, knife-edge contacts and thumb operated fine adjustment. 120 series is manufactured in theUSA. The 797 and 799 series electronic calipers have large easy-to-read displays, fine adjustment to precision, zero atany position, .0005″ resolution, lock to hold position and hardened stainless steel body for long life. The 799 seriesprovides a lightweight, ergonomic design. The 797 series features IP65 level of protection against coolant, water, dirtand dust.

25 Series

• Protective cases keep micrometers and standardstogether and readily accessible

• Carbide faces, ratchet stop and lock nut• Mfg. part no. ST436.1AXRLZ set includes: 1″, 2″ and

3″ micrometers with 2 standards• Mfg. part no. ST436.1CXRLZ set includes: 1″, 2″, 3″,

4″, 5″ and 6″ micrometers with 5 standards

3600 Series

ST436.1CXRLZ

445AZ-6RL


2252

9

Find Datasheets OnlineMECHANICAL TEST EQUIPMENT

CALIPERS, MICROMETERS, & DIAL INDICATORS • FORCE GAUGES • GAUGES


MECHANICAL FORCE GAUGES

DIGITAL FORCE GAUGES (CONT.)

Mfg. Part No. Description Stock No. Price Each950-212 6″ Spring Divider 82K5495 16.00950-215 12″ Spring Divider 82K5498 29.75

OUTSIDE SPRING CALIPER

950-222 6″ Outside Spring Caliper 82K5500 16.00INSIDE SPRING CALIPER

950-236 6″ Inside Spring Caliper w/ Quick Nut 84K7229 22.00950-232 6″ Inside Spring Caliper 82K5505 16.00950-235 12″ Inside Spring Caliper 82K5508 30.00

HERMAPHRODITE CALIPER

950-242 6″ Hermaphrodite Caliper 82K5510 25.50

Mfg. Part No. DescriptionRange(In.) Stock No. Price Each

259-24 Digital/Dial Height Gauge with Scriber, Scriber Carrier 0-24 85K5060 2336.00VERNIER HEIGHT GAUGES

254Z-24 Vernier Height Gauge 0-24 85K5035 2018.00254Z-48 Vernier Height Gauge 0-48 85K5037 5929.00

Force Gauge Model: FGE-50X FGV-50X FGE-100X FGV-100X DFS-100Capacity: 50 lb

20 kg200 N

50 lb20 kg200 N

100 lb50 kg500 N

100 lb50 kg500 N

100 lb50 kg500 N

Resolution: 0.01 lb0.01 kg0.1 N

0.01 lb0.01 kg0.1 N

0.1 lb0.01 kg0.1 N

0.1 lb0.01 kg0.1 N

0.1 lb0.01 kg0.1 N

Accuracy: 0.2% 0.2% 0.2% 0.2% 0.2%Display: 4 digit

LCD4 digitLCD

4 digitLCD

4 digitLCD

4 digitLCD

Average mode: X X X X XPeak compression mode: X X X X X

Peak tension mode: X X X X XPower required: Univeral AC

adapter/NiCad charger

Univeral ACadapter/NiCad charger




RS232C output: X X XDigimatic output

for Mitutoyo Printers:X

Analog output: X X X

MF-100

(88476)

SPRING DIVIDERS AND CALIPERS

Mfg. Part No.Capacity

(lb.) Description Stock No. Price EachFGE-50 X 50 Digital Force Gauge 82K8531 595.00FGV-50 X 50 Digital Force Gauge with RS232C and Analog Outputs 82K8565 695.00FGE-100 X 100 Digital Force Gauge 82K8526 595.00FGV-100 X 100 Digital Force Gauge with RS232C and Analog Outputs 82K8559 795.00DFS-100 100 Digital Force Gauge with RS232C, Analog and

Digimatic Outputs, 1000 Memory, Hi-low ForceLimits

82K8346 950.00

SPRING DIVIDERS

MOTORIZED STANDS FOR FORCE GAUGES


(lb.) Description Stock No. Price EachFGS-50PVH 110 Vertical Standard Speed Motorized Force Gauge

Stand82K8544 2750.00

FGS-50PVL 110 Vertical Low Speed Motorized Force Gauge Stand 82K8545 2750.00FGS-50PXH 110 Horizontal Standard Speed Motorized Force Gauge

Stand82K8546 2975.00

FGS-50PXL 110 Horizontal Low Speed Motorized Force Gauge Stand 82K8547 2975.00

FGS-50H


(lb.) Description Stock No. Price EachFGS-5S 50 Lever Operated Force Gauge Stand 82K8541 650.00FGS-50L 200 Lever Operated Force Gauge Stand 82K8543 795.00FGS-50H 200 Hand Wheel Operated Force Gauge Stand 82K8542 895.00

(89394)

Ergonomically designed for handheld use, the MF series gauges may be used with the optional handle (great for loadsover 15 pounds). Due to their mechanical design, response time is immediate. Large, easy to read dial indicators aredesigned to reduce gauge parallax. The MF series gauges feature a die-cast aluminum housing and easy mounting toall Shimpo test stands for even greater control of repetitive testing.

HEIGHT GAUGESAND CASES

Force Gauge Model: MF-50 MF-100Capacity: 50 lb. 100 lb.

Resolution: 0.5 lb. 0.25 lb.Accuracy: 0.2% 0.2%

Display: Dial DialPeak compression mode: X X

Peak tension mode: X XPower required: NA No

• Height Gages come in a variety ofstyles, sizes, readouts, andaccuracy’s to suit individual needs

• Accuracy’s range from .001″ and0.03mm on the dial and vernierheight gages

• Standard height measurements areavailable to 85″ or 2150 mm

DIGITALFORCEGAUGES

With an internal update rate of 1000HZ, ability to read and display both Peak Tension and Peak Compression as a pushpull gauge, the FGE-X and FGV-X series gauges are still ergonomically designed to fit in the palm of your hand. Therugged, all metal construction of the microprocessor-controlled FGE-X and FGV-X series permits accurate mea-surement of compression and tension forces up to 100 pounds. The FGE-X and FGV-X series feature a unique,push-button inverted digital display, permitting the user to read the display in a right side-up fashion. The FGV seriesincludes all FGE series features plus RS232C and analog outputs and an overload output signal. Microprocessor-controlled, the DFS series represents a unique approach to force testing. Designed to be handheld or stand mounted.Intelligent and versatile, these high performance gauges are easily user configured for sampling and display update rate,units of measure, baud rate, data output stream, memory type and high and low set points. Large memory capacity (100samples) and on board statistical processing allows the DFS series to operate with or without computer control.Additionally, each gauge possesses three types of signal outputs for data collection and function analysis.

MECHANICAL FORCE GAUGES


(lb.) Description Stock No. Price EachMF-50 50 Mechanical Force Gauge 82K8602 450.00MF-100 100 Mechanical Force Gauge 82K8592 450.00

259-24

MECHANICAL STANDS FOR FORCE GAUGES

DIGITAL FORCE GAUGES

MECHANICAL STANDS FOR FORCE GAUGES

375212⁄300


(lb.) Description Stock No. Price EachFGS-5S 50 Lever Operated Force Gauge Stand 82K8541 650.00FGS-50L 200 Lever Operated Force Gauge Stand 82K8543 795.00FGS-50H 200 Hand Wheel Operated Force Gauge Stand 82K8542 895.00

MOTORIZED STANDS FOR FORCE GAUGES

FGS-50PVH 110 Vertical Standard Speed Motorized Force GaugeStand

82K8544 2750.00

FGS-50PVL 110 Vertical Low Speed Motorized Force Gauge Stand 82K8545 2750.00FGS-50PXH 110 Horizontal Standard Speed Motorized Force Gauge

Stand82K8546 2975.00

FGS-50PXL 110 Horizontal Low Speed Motorized Force Gauge Stand 82K8547 2975.00

Mfg. part no. 259-24 is one of the fastest and most reliable height gauges for its range and accuracy (within .001″ atany location). The 254 series master vernier height gauges are accurate, have the easiest reading vernier style, and isoffered in greater ranges than other height gauges. The 751 series electronic height gauge is light, portable and easy touse for vertical measurements. The 3752 series electronic height gauge is a full featured, versatile and economicsolution for most height measurement applications.

FGE-50X

(89391)

DFS-100

DIGITAL/DIAL HEIGHT GAUGE



9


GAUGES • INSPECTION


HEIGHT GAUGES AND CASES (CONT.)

(148858)

(88474)

Mfg. Part No. Magnification Stock No. Price Each183-302 10X 81K7527 32.05

ELECTRONIC HEIGHT GAUGES

Mfg. Part No. DescriptionRange(In.) Stock No. Price Each

751Z-6/150 Electronic Height Gauge in Case 0-6 85K6779 592.003752-12/300 Electronic Height Gauge without Case 0-12 85K5213 705.003752-24/600 Electronic Height Gauge without Case 0-24 85K5214 1155.00

Mfg. Part No. Description Fig. Stock No. Price EachTKSZ-LV2 ESD Safe Stereo-Zoom 4.5 Microscope with Dual Ball

Bearing Arm and LED Ring IlluminatorA 59P7383 2082.20

TKSZ-F ESD Safe Stereo-Zoom 4.5 Microscope with Dual BallBearing Arm and Fluorescent Ring Illuminator

... 50H7671 1896.60

TKSZ-A ESD Safe Stereo-Zoom 4.5 Microscope with Dual BallBearing Arm and Fiber Optic Annular Illuminator

... 50H7669 2418.60

TKSZ-D ESD Safe Stereo-Zoom 4.5 Microscope with Duall BallBearing Arm and Fiber Optic Dual Point Illuminator

... 50H7670 2360.60

(88510)

WIRE GAUGES

Designed for checking wire and platethickness. American Std. is used togauge non-ferrous wire and sheet.U.S. Std. is used to gauge sheet steel.

(75420)

CLEAR LOUPE

Mfg. Part No. Description Stock No. Price Each945 Wood Case only for mfg. part no. 259-24 85K7267 205.00928 Wood Case only for mfg. part no. 3752-12 85K7247 185.00

Mfg. Part No. Description Stock No. Price EachSZ-WF10 10x Power 50H7663 109.10SZ-WF20 20x Power 50H7665 110.20

EYEGUARD — SOLD PER PAIR

SZ-EG Eyeguard 50H7658 11.55AUXILIARY LENSES FOR BINOCULAR AND MONOCULAR ZOOM SYSTEMS — SOLD INDIVIDUALLY

SZ-OBO50 0.5x Power 50H7661 92.80SZ-OBO75 0.75x Power 50H7662 98.60SZ-OBO150 1.5x Power 50H7659 103.24SZ-OBO200 2.0x Power 50H7660 110.20

Mfg. Part No. Description Stock No. Price EachDMXLC-B 7.5″ x 6.2″ Dual Mag™, Black, Table Clamp 50H7638 270.32DMXLC-W 7.5″ x 6.2″ Dual Mag™, White, Table Clamp 50H7639 270.32

13359 13 Watt Full Spectrum Replacement Bulb 50H7679 15.36DMLC-W-RAB 7.5″ x 5.75″ Dual Mag™, White, Floor Base 23K8364 292.94DMLC-B-RAB 7.5″ x 5.75″ Dual Mag™, Black, Floor Base 23K8363 292.94DMLC-B 7.5″ x 5.75″ Dual Mag™, Black, Table Clamp 67H5839 213.77DMLC-W 7.5″ x 5.75″ Dual Mag™, White, Table Clamp 56K6690 213.77

Mfg. Part No. Description Stock No. Price Each950-202 American Std. Wire Gage #0-36 82K5487 34.75950-203 U.S. Std. Wire Gage #0-36 82K5488 34.75

PROLITE® ESD SAFE STEREO-ZOOM BINOCULAR 3DMICROSCOPES

(75427)

Drawtube is made of acrylic resin forclear image of the workpiece. Drawtubeis removable for use as a magnifyingglass.

(75425)

(88710)

• Standard magnification range 3.5-45x (up to 225x)• 0.5x aux lens included for increased working distance• Extra larrge (22mm) 10X eyepieces• 160mm working distance• Protective eyeguards• Parfocal zoom• Double ball-bearing arm for precise and easy

movement• 4 light sources to choose from:

A. - High output LED illuminatorB. - Fluorescent ring illuminatorC. - Annular fiber optic illuminatorD. - Dual point fiber optic illuminator

• 5-year mechanical warranty• Optional accessories available

PROLITE® DMSC SERIES DUAL-MAG™ ILLUMINATED MAGNIFIERS

PROLITE® DMLC SERIES DUAL-MAG™ ILLUMINATED MAGNIFIERS

EYEPIECES FOR BINOCULAR AND MICROCULAR ZOOM SYSTEMS — SOLD PER PAIR

SZ-WF10

• Free 10 Diopter Swing Away Lens• Distortion Free Optical Lens• E-Z Swivel Neck Allows Unlimited Head

Angles of Use• 13 Watt Full Spectrum Dual Illumination• Independent Light Switches• Shielded Bulbs• Large Clamp on Base• 45″ Internal Spring Arm• White or Carbon Black for ESD Reduction• 1-Year Warranty

Standard 5″ round viewing area magnifier. ″3 Diopter″ Lens provides 1.75x power. Unit is provided with a ″10 Diopter″swing away lens that provide a total of ″13 Diopter″ or 3.25x power.

The largest viewing area of any ″3 Diopter″ Mag-nifier on the market today. 7.5″ x 6.2″ provides46.3 sq. inches of viewing area. ″3 Diopter″ Lensprovides 1.75x - 1.85x power. Unit is providedwith a ″10 Diopter″ swing away lens that providesa total of ″13 Diopter″ or 3.25x power.

CASES

SZ-EG

DMSC-B

DMLC-B-RAB

SZ-0B050

DMSC-W-RAB

PROLITE MICROSCOPES ACCESSORIES

• Free 10 Diopter Swing AwayLens

• Distortion Free Optical Lens• E-Z Swivel Neck Allows

Unlimited Head Angles of Use• 22 Watt 8″ Full Spectrum

Circular Bulb• Shielded Bulbs• Large Clamp on Base• 45″ Internal Spring Arm• White or Carbon Black for ESD

Reduction• 1 Year Warranty


2254

9


INSPECTION • RULES & SQUARES


PROLITE® DMSC SERIES DUAL-MAG™ ILLUMINATED MAGNIFIERS (CONT.)

(148859)

Mfg. Part No. Description Fig. Stock No. Price EachTKPZ-LV2 Pro-Zoom 6.5 Microscope; Super-Wide (28mm) A 59P7375 2546.20TKPZ-A Pro-Zoom 6.5 Microscope; Super-Wide (28mm) ... 30M6188 2894.20

Mfg. Part No. Description Fig. Stock No. Price EachTKPZT-LV2 Pro-Zoom 6.5 Microscope; Super-Wide (28mm) ... 59P7378 5098.20TKPZT-A Pro-Zoom 6.5 Microscope; Super-Wide (28mm) B 30M6202 5446.20TKDPZT-A Pro-Zoom Digital Trinocular Microscope ... 88M4719 4518.20TKDPZT-LV2 ESD Safe Analog Digital Microscope with Dual Ball

Bearing Arm and LED Ring Illuminator... 59P7350 4170.20

Mfg. Part No. Description Stock No. Price EachLWL-10600-120 6 Spot LED Machine Light ″Head Only″ Style 56P3603 326.67LWL-11600-120 6 Spot LED Machine Light on Articulating Arm 59P6808 345.39

Mfg. Part No. Description Stock No. Price Each434-12-4R 12″, 4R Graduation 85K5283 228.00434-12-16R 12″, 16R Graduation 85K5282 240.00434-18-4R 18″, 4R Graduation 85K5285 259.00434-18-16R 18″, 16R Graduation 85K5284 268.00434-24-4R 24″, 4R Graduation 85K5287 274.00434-24-16R 24″, 16R Graduation 85K5286 285.00435-12-4R 12″, 4R Graduation 85K5293 192.00435-12-16R 12″, 16R Graduation 85K5292 198.00435-18-4R 18″, 4R Graduation 85K5294 217.00435-24-4R 24″, 4R Graduation 85K5295 230.00

(88640)

(147239)

(147241)

Mfg. Part No. Description Stock No. Price EachDMSC-B Black 5″ Dual Mag™ Magnifier with Table Clamp 50H7636 168.53DMSC-W White 5″ Dual Mag™ Magnifier with Table Clamp 50H7637 168.53

13367 8 ″ Round Full Spectrum Replacement Bulb 50H7680 23.76DMSC-B-RAB Black 5″ Dual Mag™ Magnifier with Floor Base 23K8365 220.09DMSC-W-RAB White 5″ Dual Mag™ Magnifier with Floor Base 23K8366 247.7011459-W Roll-A-Round Base, White 23K8368 81.97

Mfg. Part No. Description Stock No. Price Each52400 Big Eye™ 43″ Reach, Light Gray, Table Clamp 23K0958 346.8552400-B Big Eye™ 43″ Reach, Black, Table Clamp 30M7315 346.85

13362 10″ Round Replacement Bulb for Big Eye™ 37K5966 33.0132400 Magnilite™ 43″ Reach, Light Gray, Table Clamp 56K7719 230.8532400-B Magnilite™ 43″ Reach, Black, Table Clamp 30M7229 275.60

13367 8″ Round Full Spectrum Replacement Bulb 50H7680 23.76

COMBINATION SETS

HIGH INTENSITY ULTRAFLEX®

WATERPROOF MACHINE TOOLILLUMINATION

(75430)

ESD-SAFE PRO-ZOOM STEREOBINOCULAR AND TRINOCULAR 3DMICROSCOPES

The 435 series with reversible lock bolts, scriber, spirit level in both square head and protractor head, direct readingdouble 180° protractor scale, hardened steel, machine-divided blade. Cast iron heads with black wrinkle finish. The 434series squares have the same features as the 435 Series except that the square heads and center heads are forged,hardened steel with smooth, black enamel finish. These Combination Sets are available in 12, 18 and 24 inch sizes witheither 4R or 16R graduations, go online or call.

• Built-in electronic transformer• CE and IP65 approvals• Multiple mounting options available• 50,000+ hrs. of trouble free service

(147240)

• 3 light sources to choose from:A. - High output LED illuminatorB. - Annular fiber optic illuminatorC. - Dual point fiber optic illuminator

• 5-year mechanical warranty• Optional accessories available

ESD-SAFE BIG EYE™ 7.5’ROUND AND STANDARD 5″MAGNILITE® MAGNIFIERS

• 120V-277VAC, 50/60Hz (24V available)• 6 ft., 3 prong molded cord• High output energy efficient 9W LED• Light output: 540 total lumens• “No Heat” high intensity spot light

434 Series

• Made in the USA• Crown white, optical quality glass• 3 dioper lens standard (1.75x) on both models• 5 dioper (2.25x) available on 5″ models

For any machine illumination application that demands the highest spot-light intensity and near limitless positioningpossibilities, while operating in challenging environments. Fully sealed against the impingement of water, synthetic, andpetroleum based fluids, 10600/11600 LED series meets the stringent IP65 waterproof standards.

435 Series

• Standard magnification renge 5-65x (up to 390x)• Super wide (28mm) 10x eyepieces for comfort• Large standard working distance (118mm-195mm)• .5x CCD adapter included standard (trinocular)• True trinocular allows simultaneous use of eye and video port• Double ball bearing arm standard

• 10″, 34W bulb• Table clampstandard (other mounts available)• Standard reach of 43″ (25″ also available)• 10-year mechanical warranty

LWL-11600-120 LWL-10600-120

All metal ESD safe construction, paired with superior optical quality glass, provide unrivaled performance in anymanufacturing environment.

PRO-ZOOM TRIINOCULAR PACKAGES

32400

Pro-Zoom trinocular packages feature the optical performance above and are availalbe in both digital and analogconfigurations (analog shown below): Analog package features 1⁄2″ high sensitivity color camera with 19″ high definitionLCD. Digital package features 1.3 megapixel camera with image capture and measurement software suite.

PRO-ZOOM BINOCULAR PACKAGES

Fig. A Fig. B



9


RULES & SQUARES • SCALES & BALANCES


CBK BENCH SCALES

(148860)

Mfg. Part No. Size Graduations* Width Stock No. Price Each182-101 6″(4R) 1/8; 1/16; 1/32; 1/64 3/4″ 81K7380 12.50182-105 6″ x 150mm 1/32; 1/64; 1mm; 0.5mm 3/4″ 81K7384 12.50182-121 12″(4R) 1/8; 1/16; 1/32; 1/64 1″ 81K7395 26.75182-125 12″ x 300mm 1/32; 1/64; 1mm; 0.5mm 1″ 81K7399 26.75182-161 24″(4R) 1/8; 1/16; 1/32; 1/64 1 3/16″ 81K7416 53.50182-165 24″ x 600mm 1/32; 1/64; 1mm; 0.5mm 1 3/16″ 81K7419 53.50182-201 6″(4R) 1/8; 1/16; 1/32; 1/64 1/2″ 81K7424 11.85182-205 6″ x 150mm 1/32; 1/64; 1mm; 0.5mm 1/2″ 81K7428 11.85182-221 12″(4R) 1/8; 1/16; 1/32; 1/64 1/2″ 81K7444 23.50182-225 12″ x 300mm 1/32; 1/64; 1mm; 0.5mm 1/2″ 81K7448 23.50182-272 24″ x 300mm 1/8; 1/16; 1/32; 1/64 3/4″ 84K5279 37.85182-273 24″ x 300mm 1/32; 1/64; 1mm; 0.5mm 3/4″ 84K5280 37.85

BLACK CHROME RULE

182-109 6″(4R) 1/8; 1/16; 1/32; 1/64 3/4″ 81K7388 11.50182-127 12″(4R) 1/8; 1/16; 1/32; 1/64 1″ 81K7401 14.00182-166 24″(4R) 1/8; 1/16; 1/32; 1/64 1 3/16″ 81K7420 40.75

POCKET STEEL RULE

950-300 6″ x 150mm 1mm; 1/64 1/2″ 82K5521 7.75950-301 6″ 1/32; 1/64 1/2″ 84K7231 3.90

(88423)


(lbs.)Readability

(lbs.)Platform Size

(in.) Stock No. Price EachCBK8A 8 0.0002 8.9 × 10.8 08R4494 395.00CBK16A 16 0.0005 8.9 × 10.8 08R4490 395.00CBK16AH 16 0.0002 8.9 × 10.8 08R4491 495.00CBK35A 35 0.001 8.9 × 10.8 08R4492 395.00

Mfg. Part No. Description Size Graduations Stock No. Price EachCH604R-6 Chrome with

Reversible Hook6″(4R) 1/8; 1/16; 1/32;

1/6485K2416 24.00

C305R-6 Chrome, Full-Flexible*

6″ (5R) 1/10; 1/100; 1/32;1/64

85K2498 19.50

C305R-12 Chrome, Full-Flexible*

12″ (5R) 1/10; 1/100; 1/32;1/64

85K2493 39.00

C310K-6 Chrome,Flex., withPocket Clip

6″ (10R) 1/32; 1/64 85K2503 19.50

C310T-6 Chrome,Flexiblewith Tapered End

6″(10R) 1/32; 1/64 85K2508 20.50

C604R-6 Chrome,SpringTempered, RegularSteel Finish

6″ (4R) 1/8; 1/16; 1/32;1/64

85K2647 19.50

C604RE-6 Chrome with EndGraduations

6″ (4R) 1/8; 1/16; 1/32;1/64

85K2650 21.00

C604R-12 Chrome,SpringTempered, RegularSteel Finish

12″(4R) 1/8; 1/16; 1/32;1/64

85K2636 32.50

C331-150 Chrome,English/Metric

150mm or 5-3/4″ 1/32″; 1/64″;1/2mm;

85K2549 20.50

C331-300 Chrome,English/Metric

300mm or 11-3/4″ 1/32″; 1/64″;1/2mm;

85K2550 39.00

STEEL RULESManufactured from hardened and tem-pered stainless steel. Available in satin orblack chrome finish for easy reading.

(88729)

SATIN CHROME FINISH

RULES


(lbs.)Readability

(lbs.)Platform Size

(in.) Stock No. Price EachCPW PLUS 6 13 0.005 11.8 × 11.8 08R4512 195.00CPW PLUS 15 33 0.01 11.8 × 11.8 08R4499 195.00CPW PLUS 35 75 0.02 11.8 × 11.8 08R4508 195.00CPW PLUS 75 165 0.05 11.8 × 11.8 08R4513 195.00CPW PLUS 150 330 0.1 11.8 × 11.8 08R4500 205.00CPW PLUS 200 440 0.1 11.8 × 11.8 08R4504 215.00

CPWplus-M

CPW PLUS 35M 75 0.02 19.7 x 19.7 08R4510 350.00CPW PLUS 75M 165 0.05 19.7 x 19.7 08R4515 360.00CPW PLUS 150M 330 0.1 19.7 x 19.7 08R4502 370.00CPW PLUS 200M 440 0.1 19.7 x 19.7 08R4506 380.00

CPWplus-W

CPW PLUS 35W 75 0.02 19.7 x 19.7 08R4511 425.00CPW PLUS 75W 165 0.05 19.7 x 19.7 08R4516 435.00CPW PLUS 150W 330 0.1 19.7 x 19.7 08R4503 445.00CPW PLUS 200W 440 0.1 19.7 x 19.7 08R4507 455.00

CPWplus-L

CPW PLUS 35L 75 0.02 35.4 x 23.6 08R4509 525.00CPW PLUS 75L 165 0.05 35.4 x 23.6 08R4514 535.00CPW PLUS 150L 330 0.1 35.4 x 23.6 08R4501 545.00CPW PLUS 200L 440 0.1 35.4 x 23.6 08R4505 555.00CPW PLUS300L 660 0.02 35.4 x 23.6 08R4517 575.00

ACCESSORIES

Mfg. Part No. Description Stock No. Price Each7954 Hard Carry Carrying Case with Lock for CPWplus 08R4562 85.00

(147872)

C310K-6

*Unit of measurement is inches unless otherwise specified.

CBK includes basic weighing, check weighing with LED limit indicators and parts counting. CBK features RS232interface, date and time, a built in rechargeable battery pack and AC adapter. Ideal for production, warehousing or evenin the field.

• Non-slip adjustable feet • Large backlit LCD display • Overload protection • Easy to use keypad • Rechargeable battery with up to 90 hours operation • Tare function • Large stainless steel pan • Memory accumulation • Pre-set weighing with alarm • Check weighing LED bar graph • Capacity tracker

CPWplusPLATFORM SCALES

C604RE-6

CPWplus scales utilize the same versatile indicator whichfeatures 4 weighing modes (lb, kg, oz, lb:oz), a crisp backlitdisplay, color coded buttons with positive click feel, and simple,quick operation. The indicator can be mounted where you needit for total flexibility and the best viewing position. Rechargeablebattery pack and AC adapter both included.

C331-150

• Battery and AC operation• Crisp backlit LCD• Removable stainless steel platforms• RS-232 interface• Display Hold function• Dynamic weighing• Weighs in lb, kg, oz and lb:oz

CPWplus

CPWplus CPWplus-M

CPWplus-W

CPWplus-L


2256

9


SCALES & BALANCES


PGL PRECISIONBALANCES

PGL PRECISION BALANCES (CONT.)CBK BENCH SCALES (CONT.)

(148861)


(lbs.)Readability

(lbs.)Platform Size

(in.) Stock No. Price EachLBK6A 6 0.001 9.9 x 7.1 08R4535 145.00LBK12A 12 0.002 9.9 x 7.1 08R4533 145.00LBK25A 25 0.0005 9.9 x 7.1 08R4534 145.00LBK65A 65 0.01 9.9 x 7.1 08R4536 145.00


(g.)Readability

(g.)Platform Size

(in.) Stock No. Price EachCQT202 200 0.01 4.7 ∅ 08R4520 225.00CQT251 250 0.1 4.7 ∅ 08R4521 105.00CQT601 600 0.1 4.7 ∅ 08R4524 145.00CQT1501 1500 0.1 4.7 ∅ 08R4518 210.00CQT2601 2600 0.1 5.7 ∅ 08R4522 245.00CQT2000 2000 1 5.7 ∅ 08R4519 105.00CQT5000 5000 1 5.7 ∅ 08R4523 145.00


(g)Readability

(g)Platform Size

(in.) Stock No. Price EachHCB123 120 0.001 4.7 ∅ 08R4526 405.00HCB153 150 0.005 4.7 ∅ 08R4528 345.00HCB302 300 0.01 4.7 ∅ 08R4530 325.00HCB602H 600 0.01 4.7 ∅ 08R4532 425.00HCB602 600 0.02 4.7 ∅ 08R4531 345.00HCB1002 1000 0.01 4.7 ∅ 08R4525 495.00HCB1502 1500 0.05 4.7 ∅ 08R4527 345.00HCB3001 3000 0.1 4.7 ∅ 08R4529 325.00


(lbs.)Readability

(lbs.)Platform Size

(in.) Stock No. Price EachWBW5A 5 0.0005 8.3 × 6.8 08R4557 270.00WBW9A 9 0.001 8.3 × 6.8 08R4558 270.00WBW18A 18 0.002 8.3 × 6.8 08R4555 270.00WBW35A 35 0.005 8.3 × 6.8 08R4556 270.00


(lbs.)Readability

(lbs.)Platform Size

(in.) Stock No. Price EachCBK70A 70 0.002 8.9 × 10.8 08R4493 395.00CBK100A 100 0.005 8.9 × 10.8 08R4489 395.00

Mfg. Part No. Description Stock No. Price Each9307 Hard Carry Carrying Case with Lock for CQT, HCB 08R4569 75.008030 Kensington Lock and Cable for PGW, PGL, HCB, CQT 08R4564 28.009306 Wet Cover for CQT 87P0586 20.00

Mfg. Part No. Description Stock No. Price Each9307 Hard Carry Carrying Case with Lock for CQT, HCB 08R4569 75.008030 Kensington Lock and Cable for PGW, PGL, HCB, CQT 08R4564 28.009304 USB to USB Cable 87P0585 35.009305 Wet Cover for HCB 08R4568 20.00

(147875)

(147876)

Mfg. Part No. Description Stock No. Price Each9025 Hard Carry Carrying Case with Lock for CBC, CBK 08R4566 85.006080 Below Balance Weighing (CBK factory install) 08R4561 125.005006 Wet Cover for CBC, CBK 87P0423 20.005006-5 Wet Cover for CBC, CBK 08R4560 40.005006-10 Wet Cover for CBC, CBK 08R4559 75.00

(147879)

WBW WASHDOWN SCALES

(147878)


(g)Readability

(g)Platform Size

(in.) Stock No. Price EachPGL2002 2000 0.01 7.6 x 7.6 08R4539 725.00PGL4001 4000 0.1 7.6 x 7.6 08R4541 650.00PGL6001 6000 0.1 7.6 x 7.6 08R4542 725.00PGL8001 8000 0.1 7.6 x 7.6 08R4543 795.00PGL10001 10000 0.1 15.7 x 11.8 08R4537 1750.00PGL20001 20000 0.1 15.7 x 11.8 08R4538 2100.00

LBK WEIGHING SCALES

• Rechargeable battery or ACadapter operation (adapterincluded)

• Stainless steel pan• 5 weighing units• Pre-set tare• Auto power off• Overload alarm• Adjustable level feet

Mfg. Part No. Description Stock No. Price Each8030 Kensington Lock and Cable for PGW, PGL, HCB, CQT 08R4564 28.007238 Below balance Hanger for PGW, PGL 87P0538 25.00

• IP65 rated for wash down• Backlit LCD with capacity tracker• Colored LED check limit indicators• Rechargeable battery and AC adapter included• Stainless steel pan• Weighs in g, kg, lb, oz and lb:oz• Overload protection

(147873)

HIGHLAND™ PORTABLEPRECISION BALANCES

CORE™ COMPACTPORTABLE BALANCE

(147877)

• RS-232 and USB interfaces• Can be stacked for storage and transportation• ShockProtect™ overload protection• Audible overload indicator• HandiCal™ internal calibration for fast accurate readings• Lock down mounting slot for Kensington™ type lock and cable• Dual tare keys, color coded for easy recognition• Internal rechargeable battery with auto power off and low-

battery indicator• Capacity tracker• Removable draft shield

Compact LBK scales offer quick and easy weighing.Simple to use with only 5 keys, which are color coded tohighlight the most used keys for faster operation.

WBW scales feature amber, green and red LED indicators toquickly show if a sample is within acceptable limits, over, orunder, without looking at the actual weight.

• Stainless steel pan• Three-point ShockProtect™ overload protection• Built in security slot for Kensington™ type lock• Dual tare keys, color-coded for easy recognition• Battery powered with 6 x AA batteries or AC adapter• Auto power off to save battery life• Low-battery indicator• Large backlit display is clear and quick to read• Removable draft shield on 4.7” / 120mm ø pans• Stacking storage (CQT202, 251, 601 and 1501 models)

Core series durable ABS housing is designed to withstand field and laboratory environments, while being easy to cleanand protected from accidental spills.

• All metal construction• Backlit LCD display with capacity tracker• Stainless steel platform

Highland balances feature multiple weighing units, RS-232 and USB interfaces, rechargeable battery pack and ACoperation, capacity tracker, adjustable feet and level and lock down.

• RS-232 interface• AC power or rechargeable battery operation• 8 weighing units including one customer unit• Below balance weighing

ACCESSORIES

ACCESSORIES

ACCESSORIES

PGL balances feature full-metal die cast housing, sealed front panel, and readabilities of 1mg, 10mg, and 0.1g. Ideal forapplications that demand both high precision and ruggedness.

ACCESSORIES



9


SCALES & BALANCES


DIGITAL BALANCE, 300g x 0.01g WITH COUNTING FUNCTION

(148829)

• Microprocessor Circuit with High Accuracy for BetterPerformance

• 0.0005 Oz. Resolution and Wide Measuring Capacity• Large LCD 18mm ( 0.7″ ) Digit Size for Easy Readout• Built-In Gram and Oz. Display Unit, Select By the Internal

Slide Switch• High-Precision Counting Scale Function (10pc, 20pc, 50pc

or 100pc) • RS-232 Computer Interface• Built-In ″Level Bubble″ and Adjustable ″Rubber Pads″• Heavy-Duty ABS Plastic Housing/Case


1-472-6787 Digital Scale 17C6514 163.24


(g)Readability

(g)Platform Size

(in.) Stock No. Price EachPGW153E 150 0.001 5.5 x 5.5 08R4545 850.00PGW253E 250 0.001 5.5 x 5.5 08R4547 925.00PGW453E 450 0.001 5.5 x 5.5 08R4550 1050.00PGW753E 750 0.001 5.5 x 5.5 08R4551 1375.00PGW1502E 1500 0.01 7.6 × 7.6 08R4544 850.00PGW2502E 2500 0.01 7.6 × 7.6 08R4546 925.00PGW3502E 3500 0.01 7.6 × 7.6 08R4548 1025.00PGW4502E 4500 0.01 7.6 × 7.6 08R4549 1125.00

(65294)


(lbs.)Readability

(lbs.)Platform Size

(in.) Stock No. Price EachCBC 8A 8 0.0002 8.9 × 10.8 08R4487 395.00CBC 16A 16 0.0005 8.9 × 10.8 08R4484 395.00CBC 35A 35 0.001 8.9 × 10.8 08R4485 395.00CBC 70A 70 0.002 8.9 × 10.8 08R4486 395.00CBC100A 100 0.005 8.9 × 10.8 08R4488 395.00

DIGITAL SCALE

Benchtop digital balance features a built-in self-calibration system. The calibration value can memorize into EEPROMcircuit permanently even when power is off. Two-way power either battery or AC/DC adapter (not included); go online orcall. Order RS-232 software and cable separately below.

Mfg. Part No. Description Stock No. Price Each8036 Anti -Vibration Table use with PGW 87P0574 675.008030 Kensington Lock and Cable for PGW, PGL, HCB, CQT 08R4564 28.007238 Below balance Hanger for PGW, PGL 87P0538 25.008031 Wet Cover for PGW, PGL 08R4565 25.00

Mfg. Part No. Description Stock No. Price Each9025 Hard Carry Carrying Case with Lock for CBC, CBK 08R4566 85.005006 Wet Cover for CBC, CBK 87P0423 20.005006-5 Wet Cover for CBC, CBK 08R4560 40.005006-10 Wet Cover for CBC, CBK 08R4559 75.00


(lbs.)Readability

(lbs.)Platform Size

(in.) Stock No. Price EachPT112+AE401 2500 0.5 47.2 × 47.2 08R4552 1125.00PT312-5+AE401 5000 1 47.2 × 47.2 08R4554 1125.00PT312-10+AE401 10000 2 47.2 × 47.2 08R4553 1125.00

(147882)

SPECIFICATIONS

(147880)

Mfg. Part No. Description Stock No. Price Each9072 PT 12R Ramp Option 08R4567 275.00

• Load Cell Transducer• Platform Size: 7.2″ x 7.2″• Power Supply: 6 x 1.5AA Batteries or DC 9V

Adapter (Not supplied)

CBC BENCHCOUNTING SCALES

Measuring Rangeand

Resolution

Unit Range Resolutionoz. 0.005 to 9.995 0.0005

10.000 to 10.581 0.001 Accuracy* + or - (0.05% +0.04g)Maximum Display Weight oz. 21Minimum Display Weight oz. 0.005 Size Cabinet: 250 x 180 x 70mm

Platform: Round, 120mm Diameter

(147881)

• Lightweight and Portable• Displays Weight up to 11 lbs.• 11.022 lb x 0.002 lb Resolution• High-Resolution, High-Quality

PGW PRECISIONBALANCES

PT PLATFORM SCALES

Durable CBC scales offer speed and simplicity for counting applications. With three displays to show weight, unit weightand number of parts simultaneously its analysis is quick and complete. CBC scales provide reliable performance.

• Metal casing • Force restoration mechanism • RS-232 bi-directional interface • Accessories interface • Security locking station • External calibration • Internal calibration models • GLP print outs • Date and time • Colour coded keys • Backlit LCD with dual display • Up to 18 weighing units (including one

custom unit) • Draft shield supplied as standard with

models with 0.001g readability • Capacity tracker • Multilingual display

Extra-large display, heavy-duty ABS plastic housing. Includes instruction manual.

*Accuracy within 2 hours after self-calibration @ 23°C ± or - 5°C

Mfg. Part No. Description Stock No. Price Each72-7255 Digital Balance w/Counting Function 16H5083 273.4872-6701A RS-232 Software 94H7485 34.6072-6704 RS-232 Cable 18C2268 12.95

PGW precision balances are designed to deliver the ultimate in speed and accuracy in an easy- to-use and reliablemodel.

• Non-slip adjustable feet • Large backlit LCD displays • Overload protection • Easy to use keypad • Rechargeable battery with up to 90

hours operation • Preset tare function • Large stainless steel pan • Memory accumulation

• Adjustable levelling feet • Approximately 3 meter long shielded cable • Available in a range of capacities and platform sizes

ACCESSORIES

ACCESSORIES

(74447)

• Overload protection • Precision load cells for accurate weighing

results every timePT platforms with AE401 indicator offer a variety of features for many different applications. The stainless steel housingis sealed for IP65 wash down environments and comes complete with the wall mount bracket and hardware.

ACCESSORIES

PT Platform AE401 Indicator

Catalog Electronic Test Measurement Equipment

Documents

Transcript of Catalog Electronic Test Measurement Equipment