Cam and Groove Information - International Belt and · PDF fileDixon Valve & Coupling Cam &...

Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991

Cam and Groove Information

"Andrews", "Boss-Lock" and "EZ Boss-Lock" Cam and Groove couplers and adapters areproduced to interchange with all product produced to Mil-C-27487F.No standard exists for the 1/2" and 8" fittings, and generally these sizes do not interchange withother manufacturers.Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety andenvironmental reasons.Designed for use with Liquids, consult Dixon for specific recommendations.

Recommendations based on the use of mating Dixon fittings at ambient temperature (70° F)with standard Buna-N Seal installed. For use at elevated temperature or other unusualoperating conditions, consult the factory.

Specifications:

SPECIFICATIONS ON OUR CAM AND GROOVE

Pressure Ratings:

"ANDREWS"

Operation of Cam and Groove1. To make connection, simply slide the adapter into

the coupler and with normal hand pressure, pressthe cam levers down.

2. Uncoupling is as quick and simple as coupling.Just lift the cam arms and remove the adapter.

"BOSS-LOCK"

The Cast-in lugs allow safety clips to be attached oncethe lugs are passed through slots in the special camlever arms. These clips prevent the coupler from beingunlocked until they are removed, providing a positivelocking action.

"Boss-Lock" Cam & Groove provides aunique patented safety feature.

Dixon has developed the Pull Ring Safety Clip tosimplify the locking action on "Boss-Lock" couplers.No more inserting clips or dangling lanyards, just atwist and it's locked, giving you a low profile positivelocking action.The Pull Ring Safety Clip will be phased into stock onall "Boss-Lock" couplers as inventory is replaced.

Buy with Confidence"Boss-Lock" Investment StainlessSteel Cam Arms are Guaranteed!!!

Should you ever break a "Boss-Lock" InvestmentStainless Steel Cam Arm, simply return it to thenearest warehouse for a free replacement.

Pull Ring Safety Clips

1/2"

150

"Andrews", "Boss-Lock" and "EZ Boss-Lock" Couplers and Adapters Maximum Working Pressure

5" & 6"

75

4"

100

Sizes

PSI

3/4"-2"

250

2 1/2"

150

3"

125

4

If coupling is a reducing size, the coupler or adapter isthe first size (i.e. 4030-C is 4 inch coupler to 3 inch hoseshank.)

200 - A - AL - *

Gasket

Material Code

Style Code

Size of coupler or adapter and hoseor pipe end; i.e. = 2 inch size.

ANDREWS ORDERING SYSTEM

1. Precision machined to rigid tolerances.2. Durable stainless steel cam arm pins will not rust or

bind, for greater strength and safety.3. Recess holds gasket firmly in place - assures

proper placement.4. Long shank design allows proper banding thus

eliminating the major cause of hose damage.

2

1 32


TYPE D(female coupler x female NPT)

CAM & GROOVE LINE DRAWINGS"EZ BOSS-LOCK"

Cam and Groove Information

TYPE DP *(dust plug)

NOTE: Line drawings are representative of theDixon / "Andrews" line of cam and groove.

* Dust Caps and Dust Plugs are NOT to be used inPressure Applications for safety and environmentalreasons.

No more fumbling with clamps, wire, clips or pins . .Just close the handles and the locking

mechanism is engaged.

Unlike other safety couplings . . .

• The EZ Boss-Lock is extremely EASY TO OPEN!!!

The release lever is under your thumb when you want

to open the fitting. ERGONOMIC.

• The EZ Boss-Lock is resistant to accidental

disconnection when being dragged. The release

lever opens in the direction opposite to the cam arm,

so movements that tend to open the release lever also

tend to close the cam arm!!!

• The EZ Boss-Lock alerts you if it is not properly

engaged. If the rotating lever is not flush with the

handle, it is not properly engaged.

• The EZ Boss-Lock has no sliding pins to jam.

The EZ Boss-Lock’s rotating action helps keep the

locking device free of debris.

• The EZ Boss-Lock has no sliding pins to pop

open. The EZ Boss-Lock is designed to protect critical

parts from impact and to withstand rugged use.

• The EZ Boss-Lock can be supplied with special

shanks custom suited to your needs. The EZ

Boss-Lock is available with Swaged and PF shank

designs, for hard to couple chemical hoses.

• The EZ Boss-Lock cam arm assemblies are made of

investment cast Stainless Steel with plated

Carbon Steel pull rings.

• The EZ Boss-Lock is easier to insert into the

hose tubes on Tank Trucks, and easier to use in

restricted spaces. This is due to the smaller

maximum O.D. and a more snag free exterior.

• The EZ Boss-Lock Cam Arm assemblies can be

retrofitted onto Undamaged Stainless Steel

Boss-Lock. This allows you to protect your

investment in Stainless Steel Boss-Lock couplings

while you upgrade.

• The EZ Boss-Lock is Made in the USA.

TYPE A(male adapter x female NPT)

TYPE F(male adapter x male NPT)

TYPE DC *(dust cap)

TYPE C(female coupler x hose shank)

TYPE B(female coupler x male NPT)

3

All measurements in this brochure are for referenceonly and are subject to change. Where dimensionsare critical, please consult the factory. For productsnot shown or special application questions, pleaseconsult the factory.

WARNING:

UNDER NO CIRCUMSTANCES

should Cam and Groove couplings

be used for compressed air

or steam service!

TYPE E(male adapter x hose shank)


Dixon "Andrews" / "Boss-Lock" Type A Adapters4

Male Adapter x Female NPT

-----

-----

-----

A

B

C

Overall Length

Adapter Length

Distance Across Flats

ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS

Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

8"BL

1 9/16

1

1

1 5/8

1

1 5/16

1 7/16

1

1 5/16

1 11/16

1 5/16

1 1/2

2 3/16

1 9/16

2

2 7/32

1 5/8

2 9/32

2 19/32

1 7/8

2 25/32

2 3/4

1 15/16

3 1/4

2 3/4

2

3 7/8

3 1/8

2 1/16

5

3 17/32

2 5/16

5 15/16

3 3/8

2 1/4

7 3/4*

4 13/16

3 9/16

10 5/8*

4 7/16

2 1/4

10 5/8*

STAINLESS STEEL DIMENSIONS

A

B

C

Overall Length

Adapter Length


Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

8"BL

1 9/16

1

1

* Distance Over Lugs.

1 19/32

1

1 5/16

1 1/2

1

1 5/16

1 31/32

1 5/16

1 1/2

2 3/16

1 9/16

2

2 3/16

1 5/8

2 1/4

2 19/32

1 7/8

2 11/16

2 11/16

1 15/16

3 1/4

2 29/32

2

3 3/4

3 11/64

2 1/16

5

3 5/16

2 5/16

6 3/4*

3 1/4

2 1/4

6 3/4*

-----

-----

-----

* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.

• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured

by P.T. Coupling.

50-A-SS

7550-A-SS

75-A-SS

100-A-SS

125-A-SS

150-A-SS

200-A-SS

250-A-SS

300-A-SS

400-A-SS

500-A-SS

600-A-SS

-----

-----

-----

-----

75-A-PM

100-A-PM

-----

150-A-PM

200-A-PM

250-A-PM

300-A-PM

400-A-PM

-----

600-A-PM

-----

-----

-----

-----

-----

-----

-----

150-A-MI

200-A-MI

-----

300-A-MI

400-A-MI

500-A-MI

-----

-----

-----

50-A-BR

7550-A-BR

75-A-BR

100-A-BR

125-A-BR

150-A-BR

200-A-BR

250-A-BR

300-A-BR

400-A-BR

-----

600-A-BR

-----

-----

-----

-----

-----

-----

-----

150-A-ALH

200-A-ALH

-----

300-A-ALH

400-A-ALH

-----

600-A-ALH

-----

-----

50-A-AL

7550-A-AL

75-A-AL

100-A-AL

125-A-AL

150-A-AL

200-A-AL

250-A-AL

300-A-AL

400-A-AL

500-A-AL

600-A-AL

800-A-AL

801-A-AL

1/2"

3/4" x 1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

5"

6"

8" AND*

8" BL*

Aluminum

Part #

AluminumHard Coat Brass

Size Part #Part # Part #

UnplatedMalleable Iron

Part #

PlatedMalleable Iron

Part #

StainlessSteel


Dixon "Andrews" / "Boss-Lock" Type E Adapters 5

Male Adapter x Hose Shank


A

B

C

Overall Length

Hose Shank Length

Hose Shank O.D.

Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

2 7/16

1 7/16

9/16

2 3/4

1 5/16

9/16

3

2

13/16

4 25/64

2 43/64

1 3/64

4 7/8

2 7/8

1 5/16

5

2 15/16

1 9/16

5 17/32

3 5/32

2 1/16

6 1/4

3 3/4

2 19/32

6 11/16

4

3 3/32

6 53/64

4 1/4

4 3/32

7 15/16

4 15/16

5 3/32

8 5/8

5 1/2

6 3/32

--------

--------

--------


A

B

C

Overall Length

Hose Shank Length

Hose Shank O.D.

Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

2 1/2

1 7/16

9/16

2 3/4

1 5/16

19/32

3

2

27/32

3 13/16

2 1/2

1 3/64

4 15/16

2 13/16

1 11/32

5 1/16

2 15/16

1 9/16

5 5/8

3 1/4

2 1/16

6 1/4

3 3/4

2 19/32

6 7/8

4 3/16

3 3/32

7 3/16

4 1/4

4 3/32

7 5/32

4 1/4

5 3/32

9 13/16

6 3/4

6 3/32

11 13/16

8

8 1/16

8"BL

11

8

8 1/16

50-E-SS

7550-E-SS

75-E-SS

100-E-SS

125-E-SS

150-E-SS

200-E-SS

250-E-SS

300-E-SS

400-E-SS

500-E-SS

600-E-SS

-----

-----

-----

7550-E-PM

75-E-PM

100-E-PM

125-E-PM

150-E-PM

200-E-PM

-----

300-E-PM

400-E-PM

-----

600-E-PM

-----

-----

-----

-----

-----

-----

-----

150-E-MI

200-E-MI

-----

300-E-MI

400-E-MI

-----

-----

-----

-----

50-E-BR

7550-E-BR

75-E-BR

100-E-BR

125-E-BR

150-E-BR

200-E-BR

250-E-BR

300-E-BR

400-E-BR

-----

600-E-BR

-----

-----

-----

-----

-----

-----

-----

150-E-ALH

200-E-ALH

-----

300-E-ALH

400-E-ALH

-----

600-E-ALH

-----

-----

50-E-AL

7550-E-AL

75-E-AL

100-E-AL

125-E-AL

150-E-AL

200-E-AL

250-E-AL

300-E-AL

400-E-AL

500-E-AL

600-E-AL

800-E-AL

801-E-AL

1/2"

3/4" x 1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

5"

6"

8" AND*

8" BL*

Aluminum

Part #


Size Part #Part # Part #


Part #


Part #

Stainless Steel


• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured by

P.T. Coupling.


Dixon "Andrews" / "Boss-Lock" Type F Adapters6

* Distance Over Lugs

Male Adapter x Male NPT


A

B

C

Overall Length

Adapter Length


Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

8"BL

2 1/8

1

1

2 1/4

1

1 5/16

2 1/16

1

1 5/16

2 23/32

1 5/16

1 1/2

2 15/16

1 9/16

1 7/8

3 1/8

1 5/8

2 1/4

3 21/32

1 7/8

2 11/16

4 5/16

1 15/16

3 1/4

4 17/32

2

3 3/4

4 59/64

2 1/16

5

------

------

------

4 15/16

2 1/4

7 3/4*

------

------

------

------

------

------


A

B

C

Overall Length

Adapter Length


Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

8"BL

2 1/8

1

1

2 7/16

1

1 5/16

2 1/16

1

1 3/8

2 3/8

1 5/16

1 1/2

2 15/16

1 9/16

1 7/8

3 5/32

1 5/8

2 1/4

3 17/32

1 7/8

2 11/16

4 3/8

1 15/16

3 1/4

4 15/32

2

3 3/4

4 21/32

2 1/16

5

4 1/2

2 5/16

6 1/2*

5 17/32

2 1/4

8 1/32*

6 15/16

3 9/16

10 5/8*

6 3/8

3 1/16

10 5/8*

Part #

50-F-BR

7550-F-BR

75-F-BR

100-F-BR

125-F-BR

150-F-BR

200-F-BR

250-F-BR

300-F-BR

400-F-BR

-----

600-F-BR

-----

-----

50-F-SS

7550-F-SS

75-F-SS

100-F-SS

125-F-SS

150-F-SS

200-F-SS

250-F-SS

300-F-SS

400-F-SS

-----

600-F-SS

-----

-----

1/2"

3/4" x 1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

5"

6"

8" AND*

8" BL*

50-F-AL

7550-F-AL

75-F-AL

100-F-AL

125-F-AL

150-F-AL

200-F-AL

250-F-AL

300-F-AL

400-F-AL

500-F-AL

600-F-AL

800-F-AL

801-F-AL

-----

-----

-----

-----

-----

150-F-ALH

200-F-ALH

-----

300-F-ALH

400-F-ALH

-----

600-F-ALH

-----

-----

AluminumAluminumHard Coat Brass

-----

-----

75-F-PM

100-F-PM

-----

150-F-PM

200-F-PM

250-F-PM

300-F-PM

400-F-PM

-----

600-F-PM

-----

-----

-----

-----

-----

-----

-----

150-F-MI

200-F-MI

-----

300-F-MI

400-F-MI

-----

-----

-----

-----

Part #


Part #


Part #

Stainless Steel

Part #Size Part #


• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured by

P.T. Coupling.


Dust caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.

Dixon "Andrews" / "Boss-Lock" Type DP Dust Plug 7

Dust Plug


A

B

C

Overall Length

Adapter Length

Outside O.D.

Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

1 1/4

1

1 1/4

1 1/4

1

1 1/4

1 11/32

1 5/16

1 7/16

2

1 9/16

1 25/32

2 1/2

1 5/8

2 3/32

2 3/4

1 7/8

2 31/64

2 7/8

1 15/16

2 63/64

2 27/32

2

3 19/32

3 1/8

2 1/16

4 45/64

------

------

------

3 3/8

2 1/4

6 59/64

------

------

------

8"BL

------

------

------


A

B

C

Overall Length

Adapter Length

Outside O.D.

Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

1 1/4

1

1 1/4

1 1/4

1

1 1/4

1 11/32

1 5/16

1 7/16

2 3/8

1 9/16

1 25/32

2 13/32

1 5/8

2 3/32

2 7/8

1 7/8

2 31/64

2 9/16

1 15/16

2 63/64

2 13/16

2

3 19/32

3 1/16

2 1/16

4 45/64

3 11/16

2 5/16

5 47/64

3 3/16

2 1/4

6 59/64

5 1/4

3 1/4

9 7/64

8"BL

4 1/2

2 3/4

8 59/64

-----

-----

100-DP-PM

125-DP-PM

150-DP-PM

200-DP-PM

250-DP-PM

300-DP-PM

400-DP-PM

-----

-----

-----

-----

50-DP-BR

75-DP-BR

100-DP-BR

125-DP-BR

150-DP-BR

200-DP-BR

250-DP-BR

300-DP-BR

400-DP-BR

-----

600-DP-BR

-----

-----

-----

-----

-----

125-DP-MI

150-DP-MI

200-DP-MI

-----

300-DP-MI

400-DP-MI

-----

-----

-----

-----

50-DP-AL

75-DP-AL

100-DP-AL

125-DP-AL

150-DP-AL

200-DP-AL

250-DP-AL

300-DP-AL

400-DP-AL

500-DP-AL

600-DP-AL

800-DP-AL

801-DP-AL

-----

-----

-----

-----

150-DP-ALH

200-DP-ALH

-----

300-DP-ALH

400-DP-ALH

-----

600-DP-ALH

-----

-----

AluminumAluminumHard Coat Brass

1/2"

3/4"

1"

1 1/4"

1 1/2"

2"

2 1/2"

3"

4"

5"

6"

8" AND*

8" BL*

Part #Size Part #Part #

50-DP-SS

75-DP-SS

100-DP-SS

125-DP-SS

150-DP-SS

200-DP-SS

250-DP-SS

300-DP-SS

400-DP-SS

-----

600-DP-SS

-----

-----


PlatedMalleable Iron Stainless Steel

Part # Part #Part #


• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured

by P.T. Coupling.


Dixon "Andrews" Type C Couplers8


--------------------150-C-MI200-C-MI-----300-C-MI400-C-MI---------------

50-C-SS75-C-SS100-C-SS125-C-SS150-C-SS200-C-SS250-C-SS300-C-SS400-C-SS500-C-SS600-C-SS-----

Stainless Steel

Part # Part #

1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

50-C-AL75-C-AL100-C-AL-----150-C-AL200-C-AL-----300-C-AL400-C-AL500-C-AL600-C-AL800-C-AL

Aluminum

Part #


Size

--------------------150-C-ALH200-C-ALH-----300-C-ALH400-C-ALH-----600-C-ALH-----

Part # Part #

50-C-BR75-C-BR100-C-BR-----150-C-BR200-C-BR-----300-C-BR400-C-BR-----600-C-BR-----

* "Andrews" and "Boss-Lock" Cam and GrooveCouplings DO NOT INTERCHANGE IN THE8" SIZE.

• See "Boss-Lock" for 1 1/4" and 2 1/2" couplers.• The 8" "Andrews" design has 4 cam arms. 1/2"

Andrews has only one cam arm.• Finger rings are not supplied on 1/2" - 1"

"Andrews" couplings.


A

B

C

D

E

Overall Length

Coupler Length

Distance Across Closed Cam Arms

Distance Across Open Cam Arms

Hose Shank O.D.

Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

2 21/32

1 7/32

1 17/32

2 11/16

9/16

3 3/4

1 1/4

2 1/8

4 3/8

13/16

4 7/32

1 19/32

2 7/16

5 3/16

1 3/64

4 41/64

1 59/64

3 1/4

7 5/32

1 5/16

4 25/32

1 7/8

3 9/16

7 7/16

1 9/16

5 19/32

2 11/32

3 15/16

7 13/16

2 1/16

------

------

------

------

------

6 1/2

2 5/16

5 15/32

10 3/32

3 3/32

6 9/16

2 5/16

6 9/16

11 3/16

4 3/32

6 9/16

2 5/16

7 9/16

12 3/16

5 3/32

9 3/8

2 5/8

10 3/32

16 1/4

6 3/32

11 13/16

3 13/16

12 1/32

19 31/32

8 1/16


A

B

C

D

E

Overall Length

Coupler Length



Hose Shank O.D.

Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

3 1/4

1 1/4

1 17/32

2 11/16

9/16

3 11/16

1 1/4

2 1/8

4 3/8

13/16

4 1/4

1 9/16

2 7/16

5 3/16

1 3/64

4 41/64

1 29/32

3 1/4

7 5/32

1 5/16

4 27/32

1 29/32

3 9/16

7 7/16

1 9/16

5 3/8

2 7/32

3 15/16

7 13/16

2 1/16

6

2 1/4

4 7/16

8 11/32

2 19/32

6 3/8

2 3/8

5 15/32

10 3/32

3 3/32

6 17/32

2 9/32

6 9/16

11 3/16

4 3/32

7 3/8

2 7/16

7 9/16

12 3/16

5 3/32

8 3/32

2 19/32

10 3/32

16 1/4

6 3/32

Female Coupler x Hose Shank


"Boss-Lock" Type C Couplers 9

-----IC075IC100-----IC150IC200-----IC300IC400IC600-----

RC050BLRC075BLRC100BLRC125BLRC150BLRC200BL-----RC300BLRC400BL----------


Part # Part #

3/4" 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"6"

8" *

-----AC075AC100AC125AC150AC200AC250AC300AC400AC600AC800

-----BC075BC100BC125BC150BC200BC250BC300BC400BC600-----

Aluminum

Part #

Brass

Size Part #

* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.

• The 8" "Boss-Lock" design has 2 camarms.

• All "Boss-Lock" Couplers come withSAFETY CLIPS.

• The 8" "Boss-Lock" were designed tointerchange with 8" Cam & Groove

Couplings manufactured by P.T.Coupling.


A

B

C

D

E


Overall LengthCoupler Length

Distance Across Safety LugsDistance Across Open Cam Arms

Hose Shank O.D.

Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

------

------

------

------

------

4 25/64

1 33/64

2 19/32

5 13/32

13/16

4 57/64

1 35/64

2 29/32

5 9/16

1 3/64

5 7/16

2 3/32

3 39/64

7 15/32

1 5/16

4 29/32

2 5/32

3 29/32

7 25/32

1 9/16

5 19/32

2 7/32

4 5/16

8 5/32

2 1/16

6 1/16

2 1/4

4 13/16

8 21/32

2 19/32

6 19/64

2 19/64

5 9/16

9 29/32

3 3/32

6 9/16

2 5/16

6 11/16

11

4 3/32

8 3/8

2 5/8

9 5/8

16 5/32

6 3/32

11 13/16

2 13/16

11 5/8

18 11/64

8 1/16

------

------

------

------

------


A

B

C

D

E


Distance Across Safety LugsDistance Across Open Cam Arms

Hose Shank O.D.

Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

3 7/64

1 27/64

2 25/32

5 13/32

9/16

3 7/8

1 7/16

2 25/32

5 13/32

13/16

4 17/32

1 9/16

2 29/32

5 9/16

1 3/64

5 7/16

2 3/32

3 39/64

7 15/32

1 5/16

4 27/32

2 5/32

3 29/32

7 25/32

1 9/16

5

2 3/16

4 5/16

8 5/32

2 1/16

-----

-----

-----

-----

-----

6 9/32

2 9/32

5 9/16

9 29/32

3 3/32

7 3/8

2 5/16

6 11/16

11

4 3/32

------

------

------

------

------

------

------

------

------

------

------

------

------

------

------


"EZ Boss-Lock" Type C Couplers10


• The 8" "EZ Boss-Lock" design has 2 cam arms.• UNDER NO CIRCUMSTANCES should the

"EZ Boss-Lock" cam arms be used on anyfitting not specifically produced for their use.

• The "EZ Boss-Lock" cam arms CANNOT beretrofitted onto existing Aluminum,Brass or Plated Malleable Iron Boss-Lockalready in service.



6 1/16

2 1/4

5 3/32

8 21/32

2 19/32

A

B

C

D

E

Overall Length

Coupler LengthDistance Across Closed Cam Arms

Distance Across Open Cam ArmsHose Shank O.D.

Size 3/4 x 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"

3 7/64

1 27/64

3 3/32

6 7/32

9/16

4 25/64

1 33/64

3 3/32

6 7/32

13/16

5 7/16

2 3/32

3 29/32

7 15/32

1 5/16

4 57/64

1 35/64

3 1/4

6 3/8

1 3/64

4 29/32

2 5/32

4 7/32

7 25/32

1 9/16

5 19/32

2 7/32

4 19/32

8 5/32

2 1/16

6 19/64

2 19/64

5 23/32

9 29/32

3 3/32

6 9/16

2 5/16

6 27/32

11

4 3/32

8 3/8

2 5/8

10 1/32

16 25/32

6 3/32

11 13/16

2 13/16

12 1/32

18 25/32

8 1/16


------

------

------

------

------

A

B

C

D

E


Distance Across Closed Cam ArmsDistance Across Open Cam Arms

Hose Shank O.D.

Size 3/4 x 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"

3 7/64

1 27/64

3 3/32

5 13/32

9/16

3 7/8

1 7/16

3 3/32

5 13/32

13/16

5 7/16

2 3/32

3 29/32

7 15/32

1 5/16

4 17/32

1 9/16

3 1/4

5 9/16

1 3/64

4 27/32

2 5/32

4 7/32

7 25/32

1 9/16

5

2 3/16

4 19/32

8 5/32

2 1/16

6 9/32

2 9/32

5 23/32

9 29/32

3 3/32

7 3/8

2 5/16

6 27/32

11

4 3/32

8 3/32

2 19/32

10 1/32

16 5/32

6 3/32

------

------

------

------

------

RC050EZRC075EZRC100EZRC125EZRC150EZRC200EZ-----RC300EZRC400EZRC600EZ-----

Stainless Steel

Part #

-----BC075EZBC100EZBC125EZBC150EZBC200EZBC250EZBC300EZBC400EZ----------

1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"6"

8" *

-----AC075EZAC100EZ-----AC150EZAC200EZAC250EZAC300EZAC400EZAC600EZAC800EZ

Part #Size Part #

Aluminum Brass


Dixon "Andrews" Type D Couplers 11

* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE. The8" "Andrews" design has 4 cam arms.

• See "Boss-Lock" for 1 1/4" and 2 1/2"couplers.

• Finger rings are not supplied on 1/2" - 1""Andrews" couplings.

• 1/2" Andrews has only one cam arm.

* Distance Across Lugs.


2 9/16

1 9/16

2 7/16

5 3/16

1 19/32

A

B

C

D

E

Overall Length

Coupler LengthDistance Across Closed Cam Arms

Distance Across Open Cam ArmsDistance Across Flats

Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

2

1 7/32

1 17/32

2 11/16

1 1/16

2 5/32

1 3/8

2 1/8

4 3/8

1 9/32

2 27/32

1 15/16

3 1/4

7 5/32

2

2 7/8

1 27/32

3 9/16

7 7/16

2 3/16

2 27/32

1 15/16

3 1/4

7 5/32

2 5/8

------

------

------

------

------

3 15/16

2 5/16

6 9/16

11 3/16

5 1/16

3 11/16

2 3/8

5 15/32

10 3/32

3 7/8

3 3/4

2 5/16

7 9/16

12 3/16

6*

4 11/32

2 5/8

10 3/32

16 1/4

7 25/32*

6

4 1/4

12 1/32

19 3/32

10 3/4*


2 1/2

1 9/16

2 7/16

5 3/16

1 5/8

A

B

C

D

E


Distance Across Closed Cam ArmsDistance Across Open Cam Arms


Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

1 7/8

1 1/4

1 17/32

2 11/16

1 1/16

2 1/16

1 1/4

2 1/8

4 3/8

1 5/16

2 27/32

1 15/16

3 1/4

7 5/32

2

2 27/32

1 29/32

3 9/16

7 7/16

2 3/16

3 13/64

2 7/32

3 15/16

7 13/16

2 11/16

3 7/16

2 1/4

4 7/16

8 11/32

3 5/16

3 47/64

2 21/64

6 9/16

11 3/16

4 7/8

3 19/32

2 9/32

5 15/32

10 3/32

3 3/4

4 1/16

2 7/16

7 9/16

12 13/16

6 13/32*

4 1/16

2 19/32

10 3/32

16 1/4

7 5/8*

------

------

------

------

------

Female Coupler x Female NPT

--------------------150-D-MI200-D-MI-----300-D-MI400-D-MI500-D-MI----------

--------------------150-D-ALH200-D-ALH-----300-D-ALH400-D-ALH-----600-D-ALH-----

50-D-SS75-D-SS100-D-SS125-D-SS150-D-SS200-D-SS250-D-SS300-D-SS400-D-SS500-D-SS600-D-SS-----

50-D-BR75-D-BR100-D-BR-----150-D-BR200-D-BR-----300-D-BR400-D-BR500-D-BR600-D-BR-----

1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Aluminum

Part #


Size Part # Part #

50-D-AL75-D-AL100-D-AL-----150-D-AL200-D-AL-----300-D-AL400-D-AL500-D-AL600-D-AL800-D-AL

UnplatedMalleable Iron Stainless Steel

Part # Part #


"Boss-Lock" Type D Couplers12


• The 8" "Boss-Lock" design has 2cam arms.


• The 8" "Boss-Lock" were designed tointerchange with 8" Cam & GrooveCouplings manufactured by P.T.Coupling.


Overall Length

Coupler Length

Distance Across Safety Lugs



* Distance Across Lugs.


A

B

C

D

E

Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2

1 27/64

2 25/32

5 13/32

1 3/16

2 1/64

1 7/16

2 25/32

5 13/32

1 3/8

2 1/2

1 9/16

2 29/32

5 9/16

1 5/8

3 3/32

2 3/32

3 39/64

7 15/32

2

2 27/32

2 5/32

3 29/32

7 25/32

2 3/16

3 3/16

2 3/16

4 5/16

8 5/32

2 11/16

------

------

------

------

------

3 19/32

2 9/32

5 9/16

9 55/64

3 3/4

3 13/16

2 5/16

5 11/16

11

5 3/16

------

------

------

------

------

------

------

------

------

------

------

------

------

------

------


A

B

C

D

E

Overall Length

Coupler Length




Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2

1 27/64

2 19/32

5 13/32

1 3/16

2 15/64

1 33/64

2 19/32

5 13/32

1 3/8

2 35/64

1 35/64

2 29/32

5 9/16

1 5/8

3 3/32

2 3/32

3 39/64

7 15/32

2

3 7/32

2 3/32

3 29/32

7 25/32

2 9/32

3 1/4

2 7/32

4 5/16

8 5/32

2 5/8

3 11/16

2 1/4

4 13/16

8 21/32

3 5/16

3 55/64

2 19/64

5 9/16

9 29/32

3 7/8

3 13/16

2 5/16

6 11/16

11

4 7/8

3 15/16

2 5/16

7 25/32

12 1/32

6

4 5/8

2 5/8

9 5/8

16 5/32

8 5/32*

4 1/2

2 13/16

11 5/8

18 11/64

9 7/8*

Plated Malleable Iron Stainless Steel

Part # Part #

RD050BLRD075BLRD100BLRD125BLRD150BLRD200BL-----RD300BLRD400BL---------------

-----ID075ID100-----ID150ID200-----ID300ID400-----ID600-----

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Aluminum

Part #

Brass

Size Part #

AD050AD075AD100AD125AD150AD200AD250AD300AD400AD500AD600AD800

BD050BD075BD100BD125BD150BD200BD250BD300BD400-----BD600-----


"EZ Boss-Lock" Type D Couplers 13

UNDER NO CIRCUMSTANCES should the "EZ Boss-Lock"

cam arms be used on any fitting not

specifically produced for their use.

The Aluminum, Brass and Malleable Iron are made from sand

castings. To insure proper functioning of the "EZ Boss-Lock"

cam arm assemblies, we sort the castings to insure there is

sufficient length and orientation on the lugs on the main casting

to engage the lever. We also buff or grind the rougher sand cast

surface to insure that the lever will move freely.

The "EZ Boss-Lock" cam arms CANNOT be retrofitted onto

existing Aluminum, Brass or Plated Malleable Iron Boss-

Lock already in service.

* "Andrews" and "Boss-Lock" Cam and Groove CouplingsDO NOT INTERCHANGE IN THE 8" SIZE.

• The 8" "EZ Boss-Lock" design has 2 cam arms.



A

B

C

D

E

Overall Length

Coupler Length




Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

------

------

------

------

------

2 15/64

1 33/64

3 3/32

6 7/32

1 3/8

2 35/64

1 35/64

3 1/4

6 3/8

1 5/8

3 3/32

2 3/32

3 29/32

7 15/32

2

3 7/32

2 3/32

4 7/32

7 25/32

2 9/32

3 1/4

2 7/32

4 19/32

8 5/32

2 5/8

3 11/16

2 1/4

5 3/32

8 21/32

3 5/16

3 55/64

2 19/64

5 23/32

9 29/32

3 7/8

3 13/16

2 5/16

6 27/32

11

4 7/8

3 15/16

2 5/16

7 7/8

12 1/16

6

4 5/8

2 5/8

10 1/32

16 25/32

8 5/32*

4 1/2

2 13/16

12 1/32

18 25/32

9 7/8*


* Distance Across Lugs

A

B

C

D

E

Overall Length

Coupler Length




Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2

1 27/64

3 3/32

6 7/32

1 3/16

2 1/64

1 7/16

3 3/32

6 7/32

1 3/8

2 1/2

1 9/16

3 1/4

6 3/8

1 5/8

3 3/32

2 3/32

3 29/32

7 15/32

2

2 27/32

2 5/32

4 7/32

7 25/32

2 3/16

3 3/16

2 3/16

4 19/32

8 5/32

2 11/16

------

------

------

------

------

3 19/32

2 9/32

5 23/32

9 29/32

9 55/64

3 13/16

2 5/16

6 27/32

11

5 3/16

4 1/16

2 19/32

10 1/32

16 25/32

7 5/8*

------

------

------

------

------

------

------

------

------

------

Stainless Steel

RD050EZRD075EZRD100EZRD125EZRD150EZRD200EZ-----RD300EZRD400EZ-----RD600EZ-----

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Part #Size Part #

Aluminum Brass

-----BD075EZBD100EZBD125EZBD150EZBD200EZBD250EZBD300EZBD400EZ---------------

-----AD075EZAD100EZ-----AD150EZAD200EZAD250EZAD300EZAD400EZAD500EZAD600EZAD800EZ

Part #


Dixon "Andrews" Type B Couplers14

* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.

• See "Boss-Lock" for 1 1/4" and 2 1/2"couplers.

• The 8" "Andrews" design has 4 cam arms.• Finger rings are not supplied on 1/2" - 1"




A

B

C

D

Overall Length

Coupler Length



Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

1 7/8

1 1/4

1 17/32

2 11/16

2 1/8

1 1/4

2 1/8

4 3/8

2 9/16

1 9/16

2 7/16

5 3/16

2 27/32

1 29/32

3 1/4

7 5/32

2 31/32

1 29/32

3 9/16

7 7/16

3 9/32

2 7/32

3 15/16

7 13/16

------

------

------

------

3 59/64

2 9/32

5 15/32

10 3/32

3 7/16

2 1/4

4 7/16

8 11/32

4 1/64

2 9/32

6 9/16

11 3/16

------

------

------

------

4 35/64

2 19/32

10 3/32

16 1/4


A

B

C

D

Overall Length

Coupler Length



Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

2

1 7/32

1 17/32

2 11/16

2 3/16

1 3/8

2 1/8

4 3/8

2 17/32

1 19/32

2 7/16

5 3/16

2 7/8

1 31/32

3 1/4

7 5/32

2 13/16

1 29/32

3 9/16

7 7/16

3 9/32

2 7/32

3 15/16

7 13/16

4 3/16

2 5/16

7 9/16

12 3/16

3 15/16

2 15/16

5 15/32

10 3/32

------

------

------

------

4 1/32

2 11/32

6 9/16

11 3/16

8 7/16

3 13/16

12 1/32

19 31/32

4 7/16

2 5/8

10 3/32

16 1/4

Female Coupler x Male NPT

---------------150-B-ALH200-B-ALH-----300-B-ALH400-B-ALH-----600-B-ALH-----


Part # Part #

50-B-SS75-B-SS100-B-SS150-B-SS200-B-SS250-B-SS300-B-SS400-B-SS600-B-SS----------

---------------150-B-MI200-B-MI----------300-B-MI400-B-MI----------

1/2"3/4"1"

1 1/2"2"

2 1/2"3"4"5"6"

8" *

Aluminum

Part #


Size Part # Part #

50-B-AL75-B-AL100-B-AL150-B-AL200-B-AL-----300-B-AL400-B-AL500-B-AL600-B-AL800-B-AL

50-B-BR75-B-BR100-B-BR150-B-BR200-B-BR-----300-B-BR400-B-BR---------------


"Boss-Lock" Type B Couplers 15

* "Andrews" and "Boss-Lock" Camand Groove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.

• The 8" "Boss-Lock" design has 2cam arms.


• The 8" "Boss-Lock" were designed

to interchange with 8" Cam &Groove Couplings manufactured byP.T. Coupling.



A

B

C

D

Overall Length

Coupler Length



Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2 15/64

1 27/64

2 19/32

5 13/32

2 5/16

1 33/64

2 19/32

5 13/32

2 35/64

1 35/64

2 29/32

5 9/16

3 5/32

2 3/32

3 39/32

7 15/32

3 5/32

2 3/32

3 29/32

7 25/32

3 9/32

1 27/64

4 5/16

5 13/32

3 7/8

2 1/4

4 13/16

8 21/32

4

2 5/16

5 9/16

9 55/64

4 1/16

2 5/16

6 11/16

11

------

------

------

------

4 23/32

2 19/32

9 5/8

16 5/32

7 1/8

2 13/16

11 5/8

18 11/64


A

B

C

D

Overall Length

Coupler Length



Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2 19/64

1 27/64

2 25/32

5 13/32

2 5/16

1 33/64

2 25/32

5 13/32

2 9/16

1 35/64

2 29/32

5 9/16

3 3/16

2 3/32

3 39/64

7 15/32

3 7/32

2 3/32

3 29/32

7 25/32

3 9/32

2 7/32

4 5/16

8 5/32

------

------

------

------

3 59/64

2 9/32

5 9/16

9 29/32

4 1/16

2 5/16

6 11/16

11

------

------

------

------

------

------

------

------

------

------

------

------


Part # Part #

RB050BLRB075BLRB100BLRB125BLRB150BLRB200BL-----RB300BLRB400BL---------------

IB050IB075IB100-----IB150IB200-----IB300IB400---------------

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Aluminum

Part #

Brass

Size Part #

AB050AB075AB100AB125AB150AB200AB250AB300AB400-----AB600AB800

BB050BB075BB100BB125BB150BB200BB250BB300BB400-----BB600-----


Dixon "EZ Boss-Lock" Type B Couplers16

UNDER NO CIRCUMSTANCES should the

"EZ Boss-Lock" cam arms be used on any fitting

not specifically produced for their use.

The Aluminum, Brass and Malleable Iron are made

from sand castings. To insure proper functioning of the

"EZ Boss-Lock" cam arm assemblies, we sort the

castings to insure there is sufficient length and

orientation on the lugs on the main casting to engage

the lever. We also buff or grind the rougher sand cast

surface to insure that the lever will move freely.

The "EZ Boss-Lock" cam arms CANNOT be

retrofitted onto existing Aluminum, Brass or

Plated Malleable Iron Boss-Lock already in

service.



A

B

C

D

Overall Length

Coupler Length



Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

------

------

------

------

2 5/16

1 33/64

3 3/32

6 7/32

2 9/16

1 9/16

3 1/4

6 3/8

3 3/16

2 3/32

3 29/32

7 15/32

3 5/32

2 3/32

4 7/32

7 25/32

3 9/32

2 7/32

4 19/32

8 5/32

------

------

------

------

4

2 5/16

5 23/32

9 29/32

4 1/16

2 5/16

6 27/32

11

------

------

------

------

------

------

------

------

4 23/32

2 19/32

10 1/32

16 25/32


A

B

C

D

Overall Length

Coupler Length



Size3/4 x

1/2"3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2 19/64

1 27/64

3 3/32

6 7/32

2 1/4

1 19/64

3 3/32

6 7/32

2 9/16

1 9/16

3 1/4

6 3/8

3 3/16

2 3/32

3 29/32

7 15/32

3 7/32

2 5/32

4 7/32

7 25/32

3 1/4

2 3/16

4 19/32

8 5/32

------

------

------

------

3 59/64

2 9/32

5 23/32

9 29/32

4 1/16

2 5/16

6 27/32

11

------

------

------

------

------

------

------

------

4 35/64

2 19/32

10 1/32

16 25/32

RB050EZRB075EZRB100EZRB125EZRB150EZRB200EZRB300EZRB400EZRB600EZ

Stainless Steel

Part #

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"3"4"6"

Part #Size Part #

Aluminum Brass

-----BB075EZBB100EZBB125EZBB150EZBB200EZBB300EZBB400EZ-----

---------------AB100EZAB150EZAB200EZAB300EZAB400EZAB600EZ


Dixon "Andrews" Type DC Dust Cap 17

Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.

* "Andrews" and "Boss-Lock" Cam and GrooveCouplings DO NOT INTERCHANGE IN THE8" SIZE.

** See "Boss-Lock" for 1 1/4" and 2 1/2" couplers.• The 8" "Andrews" Dust Cap has 2 cam arms,

unlike the Andrews Type D, which has 4.• Finger rings are not supplied on 1/2" - 1"




A

B

C

D

Overall Length

Coupler Length



Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

1 3/4

1 1/4

1 17/32

2 11/16

1 3/4

1 1/4

2 1/8

4 3/8

2 3/16

1 9/16

2 7/16

5 3/16

2 13/16

1 29/32

3 9/16

7 7/16

------

------

------

------

3 3/32

2 7/32

3 15/16

7 13/16

3 1/16

2 1/4

4 7/16

8 11/32

3 1/8

2 9/32

5 15/32

10 3/32

3 3/4

2 19/32

10 3/32

16 1/4

3 3/8

2 7/16

7 9/16

12 3/16

3 35/64

2 9/32

6 9/16

11 3/16

------

------

------

------


A

B

C

D

Overall Length

Coupler Length



Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

1 13/16

1 1/4

1 17/32

2 11/16

2 1/16

1 3/8

2 1/8

4 3/8

2 11/32

1 21/32

2 7/16

5 3/16

2 23/32

1 7/8

3 9/16

7 7/16

2 9/16

2

3 1/4

7 5/32

3 1/64

2 7/32

3 15/16

7 13/16

------

------

------

------

3 1/8

2 1/4

5 15/32

10 3/32

3 13/16

2 5/8

10 3/32

16 1/4

3 1/2

2 5/16

7 9/16

12 3/16

3 21/32

2 5/16

6 9/16

11 3/16

5 7/16

3 13/16

12 1/32

19 31/32

Type DC Dust Cap

---------------150-DC-ALH200-DC-ALH300-DC-ALH400-DC-ALH-----600-DC-ALH-----


Part # Part #

50-DC-SS75-DC-SS100-DC-SS150-DC-SS200-DC-SS250-DC-SS300-DC-SS400-DC-SS500-DC-SS600-DC-SS

--------------------200-DC-MI-----300-DC-MI400-DC-MI----------

1/2"3/4"1"

1 1/2"2"3"4"5"6"

8" *

Aluminum

Part #


Size Part # Part #

50-DC-AL75-DC-AL100-DC-AL150-DC-AL200-DC-AL300-DC-AL400-DC-AL500-DC-AL600-DC-AL800-DC-AL

50-DC-BR75-DC-BR100-DC-BR150-DC-BR200-DC-BR300-DC-BR400-DC-BR500-DC-BR----------


Dixon "Boss-Lock" Type H Dust Cap18



• The 8" "Boss-Lock" design has 2 cam arms.• All "Boss-Lock" Couplers come with SAFETY

CLIPS.• The 8" "Boss-Lock" were designed to inter

change with 8" Cam & Groove Couplingsmanufactured by P.T. Coupling.

Type H Dust Cap


A

B

C

D

Overall Length

Coupler Length



Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2 1/16

1 31/64

2 19/32

5 13/32

2 7/32

1 9/16

2 29/32

5 9/16

2 3/4

2 3/32

3 39/64

7 15/32

2 15/16

2 3/32

3 29/32

7 25/32

3 1/16

2 3/16

4 5/16

8 5/32

3 7/32

2 1/4

4 13/16

8 21/32

3 3/8

2 5/16

6 11/16

11

3 1/8

2 19/64

5 9/16

9 29/32

------

------

------

------

3 7/8

2 19/32

9 5/8

16 5/32

4 9/16

2 13/16

11 5/8

18 11/64


A

B

C

D

Overall Length

Coupler Length



Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

1 15/16

1 7/16

2 25/32

5 13/32

2 3/16

1 9/16

2 29/32

5 9/16

2 3/4

2 3/32

3 39/64

7 15/32

2 13/16

2 5/32

3 29/32

7 25/32

3 1/16

2 3/16

4 5/16

8 5/32

------

------

------

------

3 3/8

2 5/16

6 11/16

11

3 1/8

2 9/32

5 9/16

9 29/32

------

------

------

------

------

------

------

------

------

------

------

------


Part # Part #

RH075BLRH100BLRH125BLRH150BLRH200BL-----RH300BLRH400BL----------

IH075IH100-----IH150IH200IH250IH300IH400IH600-----

3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"6"

8" *

Aluminum

Part #

Brass

Size Part #

AH075AH100AH125AH150AH200AH250AH300AH400AH600AH800

BH075BH100BH125BH150BH200BH250BH300BH400BH600----

Stainless Steel


Dixon "EZ Boss-Lock" Type H Dust Cap 19


UNDER NO CIRCUMSTANCES should the"EZ Boss-Lock" cam arms be used on anyfitting not specifically produced for theiruse.The Aluminum, Brass and Malleable Iron are made fromsand castings. To insure proper functioning of the "EZBoss-Lock" cam arm assemblies, we sort the castings toinsure there is sufficient length and orientation on thelugs on the main casting to engage the lever. We alsobuff or grind the rougher sand cast surface to insure thatthe lever will move freely.The "EZ Boss-Lock" cam arms CANNOT be retrofit-ted onto existing Aluminum, Brass or Plated Mal-leable Iron Boss-Lock already in service.

Dust Cap


A

B

C

D

Overall Length

Coupler Length



Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6"

1 15/16

1 7/16

3 3/32

5 13/32

2 3/16

1 9/16

3 1/4

5 9/16

2 3/4

2 3/32

3 29/32

7 15/32

2 13/16

2 5/32

4 7/32

7 25/32

3 1/16

2 3/16

4 19/32

8 5/32

------

------

------

------

3 1/8

2 9/32

5 23/32

9 29/32

3 3/8

2 5/16

6 27/32

11

3 3/4

2 19/32

10 1/32

16 5/32


A

B

C

D

Overall Length

Coupler Length



Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6"

2 1/16

1 31/64

3 3/32

6 7/32

2 7/32

1 9/16

3 1/4

6 3/8

------

------

------

------

2 15/16

2 3/32

4 7/32

7 25/32

3 1/16

2 3/16

4 19/32

8 5/32

3 7/32

2 1/4

5 3/32

8 21/32

3 1/8

2 19/64

5 23/32

9 29/32

3 3/8

2 5/16

6 27/32

11

3 7/8

2 19/32

10 1/32

16 25/32

Stainless Steel

RH075EZRH100EZRH125EZRH150EZRH200EZ-----RH300EZRH400EZRH600EZ

3/4"1"

1 1/4"1 1/2"

2"2 1/2”

3"4"6"

Part #Size Part #Part #

Aluminum Brass

-----AH100EZ-----AH150EZAH200EZAH250EZAH300EZAH400EZAH600EZ

BH075EZBH100EZ-----BH150EZBH200EZ-----BH300EZBH400EZ-----


Swaged "EZ Boss-Lock" Type C Couplers20

Developed specifically for chemical transport hoses having Crosslinked Polyethylene (XLPE) or

Ultra High Molecular Weight Polyethylene (UHMW) tubes. Swaged "Boss-Lock" provides you

with a permanently attached Cam and Groove fitting when superior coupling retention is required.

In testing tank transport hoses from a wide variety of manufacturers, the Swaged "Boss-Lock" fitting

proved itself to be the clear winner in overall performance.

Fittings are also available on special order for other sizes or hose O.D.'s. Consult the Factory

for pricing and availability.

Consult the Factory for pricing and availability of the special equipment required for

installation.

The largest advantage of the Notched "EZ Boss-Lock"

design is that the coupling can be removed from a damaged

hose by cutting away the ferrule, without necessarily

damaging the fitting. After inspection to determine its

suitability for reuse, it can be reinstalled into another hose

by using a new ferrule.

The Notched EZ "Boss-Lock" system allows you to better

manage your inventories. You can stock one coupling and

two ferrules, and thereby cover the same hose range with

less inventory. You must purchase a fitting and the

matching ferrule to create an assembly.

Dixon stems and ferrules are specifically designed to be

used together as a coupling system. Due to differences

in dimensions and tolerances for safety reasons, do not

use other manufacture's stems or ferrules with Dixon

Cam and Groove or Holedall products.

Coupler x Hose Shank

with Ferrule

Notched "EZ Boss-Lock" Type C Couplers

A

B

C

D

E

Overall Length

Coupler Length



Hose Shank O.D.


Size 1 1/2" 2" 3" 4"

5 7/16

2 5/32

4 7/32

7 25/32

1 9/16

5 11/32

2 3/16

4 19/32

8 5/32

2 1/16

6 19/32

2 9/32

5 23/32

9 29/32

3 3/32

7 3/8

2 5/16

6 27/32

11

4 3/32

Size

3/4"

1"

1"

Maximum Hose O.D.

1 22/64"

1 35/64"

1 11/16"

RC075EZ-70

RC100EZ-20

RC100EZ-70

Stainless Steel Part #

1 6/64"

1 29/64"

1 9/16"

Minimum Hose O.D.


Ferrule

RC150EZNORC150EZNORC200EZNORC200EZNORC300EZNORC300EZNORC400EZNO

1 1/2"1 1/2"

2"2"3"3"4"

MaximumHose O.D.

Stainless

Steel Part #

Stainless Steel

Notched Ferrule Part #Size

1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"

MinimumHose O.D.

2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"

GAS2334NOGAS2370NOGAS2709NOGAS2885NOGAS3760NOGAS3885NOGAS5010NO


Swaged "Boss-Lock" Type E Adapters 21

Contact the Factory for swage and crimp recommendations.

Developed specifically for chemical transport hoses having Crosslinked

Polyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes. Swaged

"Boss-Lock" provides you with a permanently attached Cam and Groove fitting when superior

coupling retention is required.

In testing tank transport hoses from a wide variety of manufacturers, the Swaged "Boss-Lock"

fitting proved itself to be the clear winner in overall performance. Fittings are also available

on special order for other sizes or hose O.D.'s. Consult the Factory for pricing and availability.

Consult the Factory for pricing and availability of the special equipment

required for installation.

Adapter x Hose Shankwith Ferrule

Ferrule

Notched "Boss-Lock" Type E Adapters


A

B

C

Overall Length

Hose Shank Length

Hose Shank O.D.

Size 1 1/2" 2" 3" 4"

4 11/16

2 3/4

1 9/16

5 3/64

2 13/16

2 1/16

6 3/8

4

3 3/32

7 3/16

4 1/4

4 3/32

Size

3/4"

1"

1"

Maximum Hose O.D.

1 22/64"

1 35/64"

1 11/16"

RE075-1370

RE100-1620

RE100-1770


1 6/64"

1 29/64"

1 9/16"

Minimum Hose O.D.

GAS2334NO

GAS2370NO

GAS2709NO

GAS2885NO

GAS3760NO

GAS3885NO

GAS5010NO

RE150NO

RE150NO

RE200NO

RE200NO

RE300NO

RE300NO

RE400NO

1 1/2"

1 1/2"

2"

2"

3"

3"

4"

Maximum

Hose O.D.

Stainless

Steel Part #

Stainless Steel

Notched Ferrule Part #Size

1 15/16"

2 1/16"

2 15/32"

2 21/32"

3 15/32"

3 47/64"

4 5/8"

Minimum

Hose O.D.

2 3/16"

2 11/32"

2 11/16"

2 27/32"

3 23/32"

3 27/32"

4 47/64"

The largest advantage of the Notched "Boss-Lock" design is

that the coupling can be removed from a damaged hose by

cutting away the ferrule, without necessarily damaging the

fitting. After inspection to determine its suitability for

reuse, it can be reinstalled into another hose by using a new

ferrule.

The Notched "Boss-Lock" system allows you to better

manage your inventories. You can stock one coupling and

two ferrules, and thereby cover the same hose range with

less inventory. You must purchase a fitting and the

matching ferrule to create an assembly.

Dixon stems and ferrules are specifically designed to be

used together as a coupling system. Due to differences

in dimensions and tolerances for safety reasons, do not

use other manufacture's stems or ferrules with Dixon

Cam and Groove or Holedall products.

Adapter x Hose Shank


Swaged "Boss-Lock" Type C Cam and Groove Couplers

Notched NOS Shank Cam and Groove Adapters

Dixon "Andrews" Notched NOS Shank Cam and Groove Couplers

22 Notched NOS Shank Adapters and Couplers

Note: Only use the NOS shank with the NOS ferrules.

The largest advantage of the Notched "Boss-Lock" design is that the coupling can be removed

from a damaged hose by cutting away the ferrule, without necessarily damaging the fitting.

After inspection to determine its suitability for reuse, it can be reinstalled into another hose

by using a new ferrule.

The Notched "Boss-Lock" system allows you to better manage your inventories. You can stock

one coupling and two ferrules, and thereby cover the same hose range with less inventory. You

must purchase a fitting and the matching ferrule to create an assembly.

Swaged Assembly Crimped Assembly

Crimped AssemblySwaged Assembly

Fits Hose O.D. From: To:

1-1/2"

1-1/2"

2"

2"

3"

3"

Size

1 15/16"

2 1/16"

2 15/32"

2 21/32"

3 15/32"

3 47/64"

2 3/16"

2 11/32"

2 11/16"

2 27/32"

3 23/32"

3 27/32"

150ENOSSS

150ENOSSS

200ENOSSS

200ENOSSS

300ENOSSS

300ENOSSS

StainlessSteel Part #

GAS2334NOS

GAS2370NOS

GAS2709NOS

GAS2885NOS

GAS3760NOS

GAS3885NOS

304 Stainless SteelFerrule Part #

Ferrule


Ferrule

Adapter x Hose Shank


Ferrule

Note: Only use the NOS shank with the NOS ferrules.

Fits Hose O.D. From: To:

1-1/2"

1-1/2"

2"

2"

3"

3"

Size

1 15/16"

2 1/16"

2 15/32"

2 21/32"

3 15/32"

3 47/64"

2 3/16"

2 11/32"

2 11/16"

2 27/32"

3 23/32"

3 27/32"

150CNOSSS

150CNOSSS

200CNOSSS

200CNOSSS

300CNOSSS

300CNOSSS


GAS2334NOS

GAS2370NOS

GAS2709NOS

GAS2885NOS

GAS3760NOS

GAS3885NOS

304 Stainless SteelFerrule Part #

RC150BLNORC150BLNORC200BLNORC200BLNORC300BLNORC300BLNORC400BLNO

1 1/2"1 1/2"

2"2"3"3"4"

MaximumHose O.D.


Stainless SteelNotched Ferrule Part #

Size

1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"

MinimumHose O.D.

2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"

GAS2334NOGAS2370NOGAS2709NOGAS2885NOGAS3760NOGAS3885NOGAS5010NO


The shank design on these fittings was developed specifically for chemical transport hoses having Crosslinked

Polyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes, where shank retention can

be a problem when using conventional band clamps.

In testing tank transport hoses from a wide variety of manufacturers, the "Boss-Lock-PF" fitting showed significant

improvement in hose coupling retention over the conventional Cam and Groove shank design.

Other sizes are available on special order. Consult the Factory for pricing and availability. For best results we

recommend the use of 3/4" wide band clamps found in the current Dixon Price List.

"Boss-Lock-PF" Adapters and Couplers 23

DIMENSIONS

A

B

C

Overall Length

Hose Shank Length

Hose Shank O.D.

Size 1 1/2" 2" 3"

5 1/64

2 3/4

1 9/16

5 13/32

2 13/16

2 1/16

6 3/4

4

3 3/32

DIMENSIONS

A

B

C

D

E

Overall Length

Coupler Length



Hose Shank O.D.

Size 1 1/2" 2" 3"

5 7/16

2 3/32

4 7/32

7 25/32

1 9/16

5

2 3/16

4 19/32

8 5/32

2 1/16

7

2 5/16

5 23/32

9 29/32

3 3/32


RE150PFRE200PFRE300PF

1 1/2"2"3"

Size

Type E Adapter x Special Hose Shank

Type C Coupler x Special Hose Shank


RC150EZPFRC200EZPFRC300EZPF

1 1/2"2"3"

Size


Dixon / "Andrews" Reducing Couplers x Adapters24

Adapter

Coupler

Adapter

Coupler

"Boss-Lock" and "EZ Boss-Lock" Reducing Couplers x Adapters

Dixon Valve & Coupling Company800 High StreetChestertown, MD 21620

All measurements in this brochure are for reference only and are subject to change. Where dimensions arecritical, please consult the factory. For products not shown or special application questions, pleaseconsult the factory.

RDA2030BL

--------

--------

RDA3020BL

RDA3040BL

RDA4020BL

RDA4030BL

RDA6040BL

--------

ADA2030

ADA2520

ADA2530

ADA3020

ADA3040

ADA4020

ADA4030

ADA6040

ADA8060

BOSS-LOCK

Aluminum

Part #

Coupler

x Adapter

Stainless Steel

Part #

2" x 3"

2 1/2" x 2"

2 1/2" x 3"

3" x 2"

3" x 4"

4" x 2"

4" x 3"

6" x 4"

8" x 6"

2" x 3"

3" x 2"

3" x 4"

4" x 2"

4" x 3"

6" x 4"

RDA2030EZ

RDA3020EZ

RDA3040EZ

RDA4020EZ

RDA4030EZ

RDA6040EZ

ADA2030EZ

ADA3020EZ

ADA3040EZ

ADA4020EZ

ADA4030EZ

ADA6040EZ

EZ BOSS-LOCK

Stainless Steel

Part #

Aluminum

Part #

Coupler

x Adapter

* Two cam arm, "Andrews" design.

1015-DA-AL

1510-DA-AL

1520-DA-AL

2010-DA-AL

2015-DA-AL

2025-DA-AL

2030-DA-AL

2040-DA-AL

-----

-----

3015-DA-AL

3020-DA-AL

3025-DA-AL

3040-DA-AL

3060-DA-AL

4020-DA-AL

4025-DA-AL

4030-DA-AL

4050-DA-AL

4060-DA-AL

5030-DA-AL

5040-DA-AL

5060-DA-AL

6030-DA-AL

6040-DA-AL

6050-DA-AL

8060-DA-AL*

1" x 1 1/2"

1 1/2" x 1"

1 1/2" x 2"

2" x 1"

2" x 1 1/2"

2" x 2 1/2"

2" x 3"

2" x 4"

2 1/2" x 2"

2 1/2" x 3"

3" x 1 1/2"

3" x 2"

3" x 2 1/2"

3" x 4"

3" x 6"

4" x 2"

4" x 2 1/2"

4" x 3"

4" x 5"

4" x 6"

5" x 3"

5" x 4"

5" x 6"

6" x 3"

6" x 4"

6" x 5"

8" x 6"

Coupler x AdapterAluminum

Part #

© 2002 DVCC CGB7011P15M

Adapter

Coupler

Adapter

Coupler

Aluminum Hard

Coat Part #

-----

-----

-----

-----

-----

-----

-----

-----

-----

-----

-----

3020-DA-ALH

-----

-----

-----

-----

-----

4030-DA-ALH

-----

-----

-----

-----

-----

-----

-----

-----

-----

Brass

Part #

-----

-----

-----

-----

-----

-----

-----

-----

-----

-----

-----

3020-DA-BR

-----

3040-DA-BR

-----

-----

-----

4030-DA-BR

-----

-----

-----

-----

-----

-----

6040-DA-BR

-----

-----

Malleable Iron

Part #

-----

-----

-----

-----

-----

-----

-----

-----

-----

-----

-----

3020-DA-MI

-----

-----

-----

-----

-----

4030-DA-MI

-----

-----

-----

-----

-----

-----

6040-DA-MI

-----

-----

1015-DA-SS

1510-DA-SS

1520-DA-SS

2010-DA-SS

2015-DA-SS

2025-DA-SS

2030-DA-SS

2040-DA-SS

2520-DA-SS

2530-DA-SS

3015-DA-SS

3020-DA-SS

3025-DA-SS

3040-DA-SS

3060-DA-SS

4020-DA-SS

4025-DA-SS

4030-DA-SS

-----

4060-DA-SS

5030-DA-SS

5040-DA-SS

5060-DA-SS

6030-DA-SS

6040-DA-SS

6050-DA-SS

-----

Stainless

Steel Part #

Cam and Groove Information - International Belt and · PDF fileDixon Valve & Coupling Cam &...

Documents

Transcript of Cam and Groove Information - International Belt and · PDF fileDixon Valve & Coupling Cam &...