Cam and Groove Information - Mavic
Transcript of Cam and Groove Information - Mavic
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Cam and Groove Information
"Andrews", "Boss-Lock" and "EZ Boss-Lock" Cam and Groove couplers and adapters areproduced to interchange with all product produced to Mil-C-27487F.No standard exists for the 1/2" and 8" fittings, and generally these sizes do not interchange withother manufacturers.Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety andenvironmental reasons.Designed for use with Liquids, consult Dixon for specific recommendations.
Recommendations based on the use of mating Dixon fittings at ambient temperature (70° F)with standard Buna-N Seal installed. For use at elevated temperature or other unusualoperating conditions, consult the factory.
Specifications:SPECIFICATIONS ON OUR CAM AND GROOVE
Pressure Ratings:
"ANDREWS"
Operation of Cam and Groove1. To make connection, simply slide the adapter into
the coupler and with normal hand pressure, pressthe cam levers down.
2. Uncoupling is as quick and simple as coupling.Just lift the cam arms and remove the adapter.
"BOSS-LOCK"
The Cast-in lugs allow safety clips to be attached oncethe lugs are passed through slots in the special camlever arms. These clips prevent the coupler from beingunlocked until they are removed, providing a positivelocking action.
"Boss-Lock" Cam & Groove provides aunique patented safety feature.
Dixon has developed the Pull Ring Safety Clip tosimplify the locking action on "Boss-Lock" couplers.No more inserting clips or dangling lanyards, just atwist and it's locked, giving you a low profile positivelocking action.The Pull Ring Safety Clip will be phased into stock onall "Boss-Lock" couplers as inventory is replaced.
Buy with Confidence"Boss-Lock" Investment StainlessSteel Cam Arms are Guaranteed!!!
Should you ever break a "Boss-Lock" InvestmentStainless Steel Cam Arm, simply return it to thenearest warehouse for a free replacement.
Pull Ring Safety Clips
1/2"150
"Andrews", "Boss-Lock" and "EZ Boss-Lock" Couplers and Adapters Maximum Working Pressure
5" & 6"75
4"100
SizesPSI
3/4"-2"250
2 1/2"150
3"125
4
If coupling is a reducing size, the coupler or adapter isthe first size (i.e. 4030-C is 4 inch coupler to 3 inch hoseshank.)
200 - A - AL - *
Gasket
Material Code
Style Code
Size of coupler or adapter and hoseor pipe end; i.e. = 2 inch size.
ANDREWS ORDERING SYSTEM
1. Precision machined to rigid tolerances.2. Durable stainless steel cam arm pins will not rust or
bind, for greater strength and safety.3. Recess holds gasket firmly in place - assures
proper placement.4. Long shank design allows proper banding thus
eliminating the major cause of hose damage.
2
1 32
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
TYPE D(female coupler x female NPT)
CAM & GROOVE LINE DRAWINGS"EZ BOSS-LOCK"Cam and Groove Information
TYPE DP *(dust plug)
NOTE: Line drawings are representative of theDixon / "Andrews" line of cam and groove.
* Dust Caps and Dust Plugs are NOT to be used inPressure Applications for safety and environmentalreasons.
No more fumbling with clamps, wire, clips or pins . .Just close the handles and the locking
mechanism is engaged.
Unlike other safety couplings . . .• The EZ Boss-Lock is extremely EASY TO OPEN!!!
The release lever is under your thumb when you wantto open the fitting. ERGONOMIC.
• The EZ Boss-Lock is resistant to accidentaldisconnection when being dragged. The releaselever opens in the direction opposite to the cam arm,so movements that tend to open the release lever alsotend to close the cam arm!!!
• The EZ Boss-Lock alerts you if it is not properlyengaged. If the rotating lever is not flush with thehandle, it is not properly engaged.
• The EZ Boss-Lock has no sliding pins to jam.The EZ Boss-Lock’s rotating action helps keep thelocking device free of debris.
• The EZ Boss-Lock has no sliding pins to popopen. The EZ Boss-Lock is designed to protect criticalparts from impact and to withstand rugged use.
• The EZ Boss-Lock can be supplied with specialshanks custom suited to your needs. The EZBoss-Lock is available with Swaged and PF shankdesigns, for hard to couple chemical hoses.
• The EZ Boss-Lock cam arm assemblies are made ofinvestment cast Stainless Steel with platedCarbon Steel pull rings.
• The EZ Boss-Lock is easier to insert into thehose tubes on Tank Trucks, and easier to use inrestricted spaces. This is due to the smallermaximum O.D. and a more snag free exterior.
• The EZ Boss-Lock Cam Arm assemblies can beretrofitted onto Undamaged Stainless SteelBoss-Lock. This allows you to protect yourinvestment in Stainless Steel Boss-Lock couplingswhile you upgrade.
• The EZ Boss-Lock is Made in the USA.
TYPE A(male adapter x female NPT)
TYPE F(male adapter x male NPT)
TYPE DC *(dust cap)
TYPE C(female coupler x hose shank)
TYPE B(female coupler x male NPT)
3
All measurements in this brochure are for referenceonly and are subject to change. Where dimensionsare critical, please consult the factory. For productsnot shown or special application questions, pleaseconsult the factory.
WARNING:UNDER NO CIRCUMSTANCES
should Cam and Groove couplingsbe used for compressed air
or steam service!
TYPE E(male adapter x hose shank)
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Andrews" / "Boss-Lock" Type A Adapters4
Male Adapter x Female NPT
---------------
ABC
Overall LengthAdapter LengthDistance Across Flats
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"
8"AND1/2"
8"BL
1 9/1611
1 5/81
1 5/16
1 7/161
1 5/16
1 11/161 5/161 1/2
2 3/161 9/16
2
2 7/321 5/82 9/32
2 19/321 7/8
2 25/32
2 3/41 15/163 1/4
2 3/42
3 7/8
3 1/82 1/16
5
3 17/322 5/165 15/16
3 3/82 1/4
7 3/4*
4 13/163 9/1610 5/8*
4 7/162 1/4
10 5/8*
STAINLESS STEEL DIMENSIONS
ABC
Overall LengthAdapter LengthDistance Across Flats
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"
8"AND1/2"
8"BL
1 9/1611
* Distance Over Lugs.
1 19/321
1 5/16
1 1/21
1 5/16
1 31/321 5/161 1/2
2 3/161 9/16
2
2 3/161 5/82 1/4
2 19/321 7/8
2 11/16
2 11/161 15/163 1/4
2 29/322
3 3/4
3 11/642 1/16
5
3 5/162 5/166 3/4*
3 1/42 1/46 3/4*
---------------
* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured
by P.T. Coupling.
50-A-SS7550-A-SS75-A-SS100-A-SS125-A-SS150-A-SS200-A-SS250-A-SS300-A-SS400-A-SS500-A-SS600-A-SS----------
----------75-A-PM100-A-PM-----150-A-PM200-A-PM250-A-PM300-A-PM400-A-PM-----600-A-PM----------
-------------------------150-A-MI200-A-MI-----300-A-MI400-A-MI500-A-MI---------------
50-A-BR7550-A-BR75-A-BR100-A-BR125-A-BR150-A-BR200-A-BR250-A-BR300-A-BR400-A-BR-----600-A-BR----------
-------------------------150-A-ALH200-A-ALH-----300-A-ALH400-A-ALH-----600-A-ALH----------
50-A-AL7550-A-AL75-A-AL100-A-AL125-A-AL150-A-AL200-A-AL250-A-AL300-A-AL400-A-AL500-A-AL600-A-AL800-A-AL801-A-AL
1/2"3/4" x 1/2"
3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" AND*8" BL*
AluminumPart #
AluminumHard Coat Brass
Size Part #Part # Part #
UnplatedMalleable Iron
Part #
PlatedMalleable Iron
Part #
StainlessSteel
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Andrews" / "Boss-Lock" Type E Adapters 5
Male Adapter x Hose Shank
STAINLESS STEEL DIMENSIONS
ABC
Overall LengthHose Shank LengthHose Shank O.D.
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"
8"AND1/2"
2 7/161 7/169/16
2 3/41 5/169/16
32
13/16
4 25/642 43/641 3/64
4 7/82 7/81 5/16
52 15/161 9/16
5 17/323 5/322 1/16
6 1/43 3/4
2 19/32
6 11/164
3 3/32
6 53/644 1/44 3/32
7 15/164 15/165 3/32
8 5/85 1/26 3/32
------------------------
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABC
Overall LengthHose Shank LengthHose Shank O.D.
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"
8"AND1/2"
2 1/21 7/169/16
2 3/41 5/1619/32
32
27/32
3 13/162 1/21 3/64
4 15/162 13/161 11/32
5 1/162 15/161 9/16
5 5/83 1/42 1/16
6 1/43 3/4
2 19/32
6 7/84 3/163 3/32
7 3/164 1/44 3/32
7 5/324 1/45 3/32
9 13/166 3/46 3/32
11 13/168
8 1/16
8"BL118
8 1/16
50-E-SS7550-E-SS75-E-SS100-E-SS125-E-SS150-E-SS200-E-SS250-E-SS300-E-SS400-E-SS500-E-SS600-E-SS----------
-----7550-E-PM75-E-PM100-E-PM125-E-PM150-E-PM200-E-PM-----300-E-PM400-E-PM-----600-E-PM----------
-------------------------150-E-MI200-E-MI-----300-E-MI400-E-MI--------------------
50-E-BR7550-E-BR75-E-BR100-E-BR125-E-BR150-E-BR200-E-BR250-E-BR300-E-BR400-E-BR-----600-E-BR----------
-------------------------150-E-ALH200-E-ALH-----300-E-ALH400-E-ALH-----600-E-ALH----------
50-E-AL7550-E-AL75-E-AL100-E-AL125-E-AL150-E-AL200-E-AL250-E-AL300-E-AL400-E-AL500-E-AL600-E-AL800-E-AL801-E-AL
1/2"3/4" x 1/2"
3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" AND*8" BL*
Aluminum
Part #
AluminumHard Coat Brass
Size Part #Part # Part #
UnplatedMalleable Iron
Part #
PlatedMalleable Iron
Part #
Stainless Steel
* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured by
P.T. Coupling.
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Andrews" / "Boss-Lock" Type F Adapters6
* Distance Over Lugs
Male Adapter x Male NPT
STAINLESS STEEL DIMENSIONS
ABC
Overall LengthAdapter LengthDistance Across Flats
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"
8"AND1/2"
8"BL
2 1/811
2 1/41
1 5/16
2 1/161
1 5/16
2 23/321 5/161 1/2
2 15/161 9/161 7/8
3 1/81 5/82 1/4
3 21/321 7/8
2 11/16
4 5/161 15/163 1/4
4 17/322
3 3/4
4 59/642 1/16
5
------------------
4 15/162 1/47 3/4*
------------------
------------------
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABC
Overall LengthAdapter LengthDistance Across Flats
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"
8"AND1/2"
8"BL
2 1/811
2 7/161
1 5/16
2 1/161
1 3/8
2 3/81 5/161 1/2
2 15/161 9/161 7/8
3 5/321 5/82 1/4
3 17/321 7/8
2 11/16
4 3/81 15/163 1/4
4 15/322
3 3/4
4 21/322 1/16
5
4 1/22 5/166 1/2*
5 17/322 1/4
8 1/32*
6 15/163 9/1610 5/8*
6 3/83 1/1610 5/8*
Part #
50-F-BR7550-F-BR75-F-BR100-F-BR125-F-BR150-F-BR200-F-BR250-F-BR300-F-BR400-F-BR-----600-F-BR----------
50-F-SS7550-F-SS75-F-SS100-F-SS125-F-SS150-F-SS200-F-SS250-F-SS300-F-SS400-F-SS-----600-F-SS----------
1/2"3/4" x 1/2"
3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" AND*8" BL*
50-F-AL7550-F-AL75-F-AL100-F-AL125-F-AL150-F-AL200-F-AL250-F-AL300-F-AL400-F-AL500-F-AL600-F-AL800-F-AL801-F-AL
-------------------------150-F-ALH200-F-ALH-----300-F-ALH400-F-ALH-----600-F-ALH----------
AluminumAluminumHard Coat Brass
----------75-F-PM100-F-PM-----150-F-PM200-F-PM250-F-PM300-F-PM400-F-PM-----600-F-PM----------
-------------------------150-F-MI200-F-MI-----300-F-MI400-F-MI--------------------
Part #
UnplatedMalleable Iron
Part #
PlatedMalleable Iron
Part #
Stainless Steel
Part #Size Part #
* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured by
P.T. Coupling.
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dust caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.
Dixon "Andrews" / "Boss-Lock" Type DP Dust Plug 7
Dust Plug
STAINLESS STEEL DIMENSIONS
ABC
Overall LengthAdapter LengthOutside O.D.
Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"
AND1/2"
1 1/41
1 1/4
1 1/41
1 1/4
1 11/321 5/161 7/16
21 9/161 25/32
2 1/21 5/82 3/32
2 3/41 7/8
2 31/64
2 7/81 15/162 63/64
2 27/322
3 19/32
3 1/82 1/164 45/64
------------------
3 3/82 1/4
6 59/64
------------------
8"BL------------------
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABC
Overall LengthAdapter LengthOutside O.D.
Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"
AND1/2"
1 1/41
1 1/4
1 1/41
1 1/4
1 11/321 5/161 7/16
2 3/81 9/161 25/32
2 13/321 5/82 3/32
2 7/81 7/8
2 31/64
2 9/161 15/162 63/64
2 13/162
3 19/32
3 1/162 1/164 45/64
3 11/162 5/165 47/64
3 3/162 1/4
6 59/64
5 1/43 1/49 7/64
8"BL
4 1/22 3/4
8 59/64
----------100-DP-PM125-DP-PM150-DP-PM200-DP-PM250-DP-PM300-DP-PM400-DP-PM--------------------
50-DP-BR75-DP-BR100-DP-BR125-DP-BR150-DP-BR200-DP-BR250-DP-BR300-DP-BR400-DP-BR-----600-DP-BR----------
---------------125-DP-MI150-DP-MI200-DP-MI-----300-DP-MI400-DP-MI--------------------
50-DP-AL75-DP-AL100-DP-AL125-DP-AL150-DP-AL200-DP-AL250-DP-AL300-DP-AL400-DP-AL500-DP-AL600-DP-AL800-DP-AL801-DP-AL
--------------------150-DP-ALH200-DP-ALH-----300-DP-ALH400-DP-ALH-----600-DP-ALH----------
AluminumAluminumHard Coat Brass
1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" AND*8" BL*
Part #Size Part #Part #
50-DP-SS75-DP-SS100-DP-SS125-DP-SS150-DP-SS200-DP-SS250-DP-SS300-DP-SS400-DP-SS-----600-DP-SS----------
UnplatedMalleable Iron
PlatedMalleable Iron Stainless Steel
Part # Part #Part #
* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured
by P.T. Coupling.
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Andrews" Type C Couplers8
UnplatedMalleable Iron
--------------------150-C-MI200-C-MI-----300-C-MI400-C-MI---------------
50-C-SS75-C-SS100-C-SS125-C-SS150-C-SS200-C-SS250-C-SS300-C-SS400-C-SS500-C-SS600-C-SS-----
Stainless Steel
Part # Part #
1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" *
50-C-AL75-C-AL100-C-AL-----150-C-AL200-C-AL-----300-C-AL400-C-AL500-C-AL600-C-AL800-C-AL
Aluminum
Part #
AluminumHard Coat Brass
Size
--------------------150-C-ALH200-C-ALH-----300-C-ALH400-C-ALH-----600-C-ALH-----
Part # Part #
50-C-BR75-C-BR100-C-BR-----150-C-BR200-C-BR-----300-C-BR400-C-BR-----600-C-BR-----
* "Andrews" and "Boss-Lock" Cam and GrooveCouplings DO NOT INTERCHANGE IN THE8" SIZE.
• See "Boss-Lock" for 1 1/4" and 2 1/2" couplers.• The 8" "Andrews" design has 4 cam arms. 1/2"
Andrews has only one cam arm.• Finger rings are not supplied on 1/2" - 1"
"Andrews" couplings.
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsHose Shank O.D.
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"
2 21/321 7/321 17/322 11/16
9/16
3 3/41 1/42 1/84 3/813/16
4 7/321 19/322 7/165 3/161 3/64
4 41/641 59/643 1/47 5/321 5/16
4 25/321 7/83 9/167 7/161 9/16
5 19/322 11/323 15/167 13/162 1/16
------------------------------
6 1/22 5/165 15/3210 3/323 3/32
6 9/162 5/166 9/1611 3/164 3/32
6 9/162 5/167 9/1612 3/165 3/32
9 3/82 5/8
10 3/3216 1/46 3/32
11 13/163 13/1612 1/3219 31/328 1/16
STAINLESS STEEL DIMENSIONS
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsHose Shank O.D.
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"
3 1/41 1/4
1 17/322 11/16
9/16
3 11/161 1/42 1/84 3/813/16
4 1/41 9/162 7/165 3/161 3/64
4 41/641 29/323 1/47 5/321 5/16
4 27/321 29/323 9/167 7/161 9/16
5 3/82 7/323 15/167 13/162 1/16
62 1/44 7/168 11/322 19/32
6 3/82 3/8
5 15/3210 3/323 3/32
6 17/322 9/326 9/1611 3/164 3/32
7 3/82 7/167 9/1612 3/165 3/32
8 3/322 19/3210 3/3216 1/46 3/32
Female Coupler x Hose Shank
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
"Boss-Lock" Type C Couplers 9
-----IC075IC100-----IC150IC200-----IC300IC400IC600-----
RC050BLRC075BLRC100BLRC125BLRC150BLRC200BL-----RC300BLRC400BL----------
PlatedMalleable Iron Stainless Steel
Part # Part #
3/4" 1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"6"
8" *
-----AC075AC100AC125AC150AC200AC250AC300AC400AC600AC800
-----BC075BC100BC125BC150BC200BC250BC300BC400BC600-----
Aluminum
Part #
Brass
Size Part #
* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.
• The 8" "Boss-Lock" design has 2 camarms.
• All "Boss-Lock" Couplers come withSAFETY CLIPS.
• The 8" "Boss-Lock" were designed tointerchange with 8" Cam & GrooveCouplings manufactured by P.T.Coupling.
Female Coupler x Hose Shank
ABCDE
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsHose Shank O.D.
Size3/4 x1/2"
3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"
------------------------------
4 25/641 33/642 19/325 13/3213/16
4 57/641 35/642 29/325 9/161 3/64
5 7/162 3/323 39/647 15/321 5/16
4 29/322 5/323 29/327 25/321 9/16
5 19/322 7/324 5/168 5/322 1/16
6 1/162 1/4
4 13/168 21/322 19/32
6 19/642 19/645 9/169 29/323 3/32
6 9/162 5/166 11/16
114 3/32
8 3/82 5/89 5/8
16 5/326 3/32
11 13/162 13/1611 5/8
18 11/648 1/16
------------------------------
STAINLESS STEEL DIMENSIONS
ABCDE
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsHose Shank O.D.
Size3/4 x1/2"
3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"
3 7/641 27/642 25/325 13/32
9/16
3 7/81 7/162 25/325 13/3213/16
4 17/321 9/162 29/325 9/161 3/64
5 7/162 3/323 39/647 15/321 5/16
4 27/322 5/323 29/327 25/321 9/16
52 3/164 5/168 5/322 1/16
-------------------------
6 9/322 9/325 9/169 29/323 3/32
7 3/82 5/166 11/16
114 3/32
------------------------------
------------------------------
------------------------------
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
"EZ Boss-Lock" Type C Couplers10
* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.
• The 8" "EZ Boss-Lock" design has 2 cam arms.• UNDER NO CIRCUMSTANCES should the
"EZ Boss-Lock" cam arms be used on anyfitting not specifically produced for their use.
• The "EZ Boss-Lock" cam arms CANNOT beretrofitted onto existing Aluminum,Brass or Plated Malleable Iron Boss-Lockalready in service.
Female Coupler x Hose Shank
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
6 1/162 1/45 3/328 21/322 19/32
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsHose Shank O.D.
Size 3/4 x 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"
3 7/641 27/643 3/326 7/329/16
4 25/641 33/643 3/326 7/3213/16
5 7/162 3/323 29/327 15/321 5/16
4 57/641 35/643 1/46 3/81 3/64
4 29/322 5/324 7/327 25/321 9/16
5 19/322 7/324 19/328 5/322 1/16
6 19/642 19/645 23/329 29/323 3/32
6 9/162 5/166 27/32
114 3/32
8 3/82 5/8
10 1/3216 25/326 3/32
11 13/162 13/1612 1/3218 25/328 1/16
STAINLESS STEEL DIMENSIONS
------------------------------
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsHose Shank O.D.
Size 3/4 x 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"
3 7/641 27/643 3/325 13/32
9/16
3 7/81 7/163 3/325 13/3213/16
5 7/162 3/323 29/327 15/321 5/16
4 17/321 9/163 1/45 9/161 3/64
4 27/322 5/324 7/327 25/321 9/16
52 3/164 19/328 5/322 1/16
6 9/322 9/325 23/329 29/323 3/32
7 3/82 5/166 27/32
114 3/32
8 3/322 19/3210 1/3216 5/326 3/32
------------------------------
RC050EZRC075EZRC100EZRC125EZRC150EZRC200EZ-----RC300EZRC400EZRC600EZ-----
Stainless Steel
Part #
-----BC075EZBC100EZBC125EZBC150EZBC200EZBC250EZBC300EZBC400EZ----------
1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"6"
8" *
-----AC075EZAC100EZ-----AC150EZAC200EZAC250EZAC300EZAC400EZAC600EZAC800EZ
Part #Size Part #
Aluminum Brass
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Andrews" Type D Couplers 11
* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE. The8" "Andrews" design has 4 cam arms.
• See "Boss-Lock" for 1 1/4" and 2 1/2"couplers.
• Finger rings are not supplied on 1/2" - 1""Andrews" couplings.
• 1/2" Andrews has only one cam arm.
* Distance Across Lugs.
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
2 9/161 9/162 7/165 3/161 19/32
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsDistance Across Flats
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"2
1 7/321 17/322 11/161 1/16
2 5/321 3/82 1/84 3/81 9/32
2 27/321 15/163 1/47 5/32
2
2 7/81 27/323 9/167 7/162 3/16
2 27/321 15/163 1/47 5/322 5/8
------------------------------
3 15/162 5/166 9/1611 3/165 1/16
3 11/162 3/8
5 15/3210 3/323 7/8
3 3/42 5/167 9/1612 3/16
6*
4 11/322 5/8
10 3/3216 1/4
7 25/32*
64 1/4
12 1/3219 3/3210 3/4*
STAINLESS STEEL DIMENSIONS
2 1/21 9/162 7/165 3/161 5/8
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsDistance Across Flats
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"1 7/81 1/4
1 17/322 11/161 1/16
2 1/161 1/42 1/84 3/81 5/16
2 27/321 15/163 1/47 5/32
2
2 27/321 29/323 9/167 7/162 3/16
3 13/642 7/323 15/167 13/162 11/16
3 7/162 1/44 7/168 11/323 5/16
3 47/642 21/646 9/1611 3/164 7/8
3 19/322 9/325 15/3210 3/323 3/4
4 1/162 7/167 9/16
12 13/166 13/32*
4 1/162 19/3210 3/3216 1/47 5/8*
------------------------------
Female Coupler x Female NPT
--------------------150-D-MI200-D-MI-----300-D-MI400-D-MI500-D-MI----------
--------------------150-D-ALH200-D-ALH-----300-D-ALH400-D-ALH-----600-D-ALH-----
50-D-SS75-D-SS100-D-SS125-D-SS150-D-SS200-D-SS250-D-SS300-D-SS400-D-SS500-D-SS600-D-SS-----
50-D-BR75-D-BR100-D-BR-----150-D-BR200-D-BR-----300-D-BR400-D-BR500-D-BR600-D-BR-----
1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" *
Aluminum
Part #
AluminumHard Coat Brass
Size Part # Part #
50-D-AL75-D-AL100-D-AL-----150-D-AL200-D-AL-----300-D-AL400-D-AL500-D-AL600-D-AL800-D-AL
UnplatedMalleable Iron Stainless Steel
Part # Part #
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
"Boss-Lock" Type D Couplers12
* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.
• The 8" "Boss-Lock" design has 2cam arms.
• All "Boss-Lock" Couplers come withSAFETY CLIPS.
• The 8" "Boss-Lock" were designed tointerchange with 8" Cam & GrooveCouplings manufactured by P.T.Coupling.
Female Coupler x Female NPT
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsDistance Across Flats
* Distance Across Lugs.
STAINLESS STEEL DIMENSIONS
ABCDE
Size 3/4 x1/2"
3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
21 27/642 25/325 13/321 3/16
2 1/641 7/16
2 25/325 13/32
1 3/8
2 1/21 9/16
2 29/325 9/161 5/8
3 3/322 3/32
3 39/647 15/32
2
2 27/322 5/32
3 29/327 25/322 3/16
3 3/162 3/164 5/168 5/322 11/16
------------------------------
3 19/322 9/325 9/16
9 55/643 3/4
3 13/162 5/165 11/16
115 3/16
------------------------------
------------------------------
------------------------------
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCDE
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsDistance Across Flats
Size 3/4 x1/2"
3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
21 27/642 19/325 13/321 3/16
2 15/641 33/642 19/325 13/32
1 3/8
2 35/641 35/642 29/325 9/161 5/8
3 3/322 3/32
3 39/647 15/32
2
3 7/322 3/32
3 29/327 25/322 9/32
3 1/42 7/324 5/168 5/322 5/8
3 11/162 1/4
4 13/168 21/323 5/16
3 55/642 19/645 9/16
9 29/323 7/8
3 13/162 5/166 11/16
114 7/8
3 15/162 5/16
7 25/3212 1/32
6
4 5/82 5/89 5/8
16 5/328 5/32*
4 1/22 13/1611 5/8
18 11/649 7/8*
Plated Malleable Iron Stainless Steel
Part # Part #
RD050BLRD075BLRD100BLRD125BLRD150BLRD200BL-----RD300BLRD400BL---------------
-----ID075ID100-----ID150ID200-----ID300ID400-----ID600-----
3/4" x 1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" *
Aluminum
Part #
Brass
Size Part #
AD050AD075AD100AD125AD150AD200AD250AD300AD400AD500AD600AD800
BD050BD075BD100BD125BD150BD200BD250BD300BD400-----BD600-----
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
"EZ Boss-Lock" Type D Couplers 13
UNDER NO CIRCUMSTANCES should the "EZ Boss-Lock"cam arms be used on any fitting notspecifically produced for their use.The Aluminum, Brass and Malleable Iron are made from sandcastings. To insure proper functioning of the "EZ Boss-Lock"cam arm assemblies, we sort the castings to insure there issufficient length and orientation on the lugs on the main castingto engage the lever. We also buff or grind the rougher sand castsurface to insure that the lever will move freely.The "EZ Boss-Lock" cam arms CANNOT be retrofitted ontoexisting Aluminum, Brass or Plated Malleable Iron Boss-Lock already in service.
* "Andrews" and "Boss-Lock" Cam and Groove CouplingsDO NOT INTERCHANGE IN THE 8" SIZE.
• The 8" "EZ Boss-Lock" design has 2 cam arms.
Female Coupler x Female NPT
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsDistance Across Flats
Size3/4 x1/2"
3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
------------------------------
2 15/641 33/643 3/326 7/321 3/8
2 35/641 35/64
3 1/46 3/81 5/8
3 3/322 3/32
3 29/327 15/32
2
3 7/322 3/324 7/32
7 25/322 9/32
3 1/42 7/32
4 19/328 5/322 5/8
3 11/162 1/4
5 3/328 21/323 5/16
3 55/642 19/645 23/329 29/32
3 7/8
3 13/162 5/16
6 27/3211
4 7/8
3 15/162 5/167 7/8
12 1/166
4 5/82 5/8
10 1/3216 25/328 5/32*
4 1/22 13/1612 1/32
18 25/329 7/8*
STAINLESS STEEL DIMENSIONS
* Distance Across Lugs
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsDistance Across Flats
Size3/4 x1/2"
3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
21 27/643 3/326 7/321 3/16
2 1/641 7/163 3/326 7/321 3/8
2 1/21 9/163 1/46 3/81 5/8
3 3/322 3/32
3 29/327 15/32
2
2 27/322 5/324 7/32
7 25/322 3/16
3 3/162 3/16
4 19/328 5/322 11/16
------------------------------
3 19/322 9/32
5 23/329 29/329 55/64
3 13/162 5/16
6 27/3211
5 3/16
4 1/162 19/3210 1/32
16 25/327 5/8*
------------------------------
------------------------------
Stainless Steel
RD050EZRD075EZRD100EZRD125EZRD150EZRD200EZ-----RD300EZRD400EZ-----RD600EZ-----
3/4" x 1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" *
Part #Size Part #
Aluminum Brass
-----BD075EZBD100EZBD125EZBD150EZBD200EZBD250EZBD300EZBD400EZ---------------
-----AD075EZAD100EZ-----AD150EZAD200EZAD250EZAD300EZAD400EZAD500EZAD600EZAD800EZ
Part #
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Andrews" Type B Couplers14
* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.
• See "Boss-Lock" for 1 1/4" and 2 1/2"couplers.
• The 8" "Andrews" design has 4 cam arms.• Finger rings are not supplied on 1/2" - 1"
"Andrews" couplings.• 1/2" Andrews has only one cam arm.
STAINLESS STEEL DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"1 7/81 1/4
1 17/322 11/16
2 1/81 1/42 1/84 3/8
2 9/161 9/162 7/165 3/16
2 27/321 29/32
3 1/47 5/32
2 31/321 29/323 9/167 7/16
3 9/322 7/32
3 15/167 13/16
------------------------
3 59/642 9/32
5 15/3210 3/32
3 7/162 1/4
4 7/168 11/32
4 1/642 9/326 9/1611 3/16
------------------------
4 35/642 19/3210 3/3216 1/4
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"2
1 7/321 17/322 11/16
2 3/161 3/82 1/84 3/8
2 17/321 19/322 7/165 3/16
2 7/81 31/323 1/47 5/32
2 13/161 29/323 9/167 7/16
3 9/322 7/323 15/167 13/16
4 3/162 5/167 9/1612 3/16
3 15/162 15/165 15/3210 3/32
------------------------
4 1/322 11/326 9/1611 3/16
8 7/163 13/1612 1/3219 31/32
4 7/162 5/8
10 3/3216 1/4
Female Coupler x Male NPT
---------------150-B-ALH200-B-ALH-----300-B-ALH400-B-ALH-----600-B-ALH-----
UnplatedMalleable Iron Stainless Steel
Part # Part #
50-B-SS75-B-SS100-B-SS150-B-SS200-B-SS250-B-SS300-B-SS400-B-SS600-B-SS----------
---------------150-B-MI200-B-MI----------300-B-MI400-B-MI----------
1/2"3/4"1"
1 1/2"2"
2 1/2"3"4"5"6"
8" *
Aluminum
Part #
AluminumHard Coat Brass
Size Part # Part #
50-B-AL75-B-AL100-B-AL150-B-AL200-B-AL-----300-B-AL400-B-AL500-B-AL600-B-AL800-B-AL
50-B-BR75-B-BR100-B-BR150-B-BR200-B-BR-----300-B-BR400-B-BR---------------
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
"Boss-Lock" Type B Couplers 15
* "Andrews" and "Boss-Lock" Camand Groove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.
• The 8" "Boss-Lock" design has 2cam arms.
• All "Boss-Lock" Couplers come withSAFETY CLIPS.
• The 8" "Boss-Lock" were designedto interchange with 8" Cam &Groove Couplings manufactured byP.T. Coupling.
Female Coupler x Male NPT
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam Arms
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
2 15/641 27/642 19/325 13/32
2 5/161 33/642 19/325 13/32
2 35/641 35/642 29/325 9/16
3 5/322 3/323 39/327 15/32
3 5/322 3/323 29/327 25/32
3 9/321 27/644 5/165 13/32
3 7/82 1/4
4 13/168 21/32
42 5/165 9/169 55/64
4 1/162 5/166 11/16
11
------------------------
4 23/322 19/329 5/8
16 5/32
7 1/82 13/1611 5/8
18 11/64
STAINLESS STEEL DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam Arms
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
2 19/641 27/642 25/325 13/32
2 5/161 33/642 25/325 13/32
2 9/161 35/642 29/325 9/16
3 3/162 3/323 39/647 15/32
3 7/322 3/323 29/327 25/32
3 9/322 7/324 5/168 5/32
------------------------
3 59/642 9/325 9/169 29/32
4 1/162 5/166 11/16
11
------------------------
------------------------
------------------------
PlatedMalleable Iron Stainless Steel
Part # Part #RB050BLRB075BLRB100BLRB125BLRB150BLRB200BL-----RB300BLRB400BL---------------
IB050IB075IB100-----IB150IB200-----IB300IB400---------------
3/4" x 1/2"3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"5"6"
8" *
Aluminum
Part #
Brass
Size Part #AB050AB075AB100AB125AB150AB200AB250AB300AB400-----AB600AB800
BB050BB075BB100BB125BB150BB200BB250BB300BB400-----BB600-----
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "EZ Boss-Lock" Type B Couplers16
UNDER NO CIRCUMSTANCES should the"EZ Boss-Lock" cam arms be used on any fittingnot specifically produced for their use.The Aluminum, Brass and Malleable Iron are madefrom sand castings. To insure proper functioning of the"EZ Boss-Lock" cam arm assemblies, we sort thecastings to insure there is sufficient length andorientation on the lugs on the main casting to engagethe lever. We also buff or grind the rougher sand castsurface to insure that the lever will move freely.The "EZ Boss-Lock" cam arms CANNOT beretrofitted onto existing Aluminum, Brass orPlated Malleable Iron Boss-Lock already inservice.
Female Coupler x Male NPT
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
------------------------
2 5/161 33/643 3/326 7/32
2 9/161 9/163 1/46 3/8
3 3/162 3/32
3 29/327 15/32
3 5/322 3/324 7/32
7 25/32
3 9/322 7/32
4 19/328 5/32
------------------------
42 5/16
5 23/329 29/32
4 1/162 5/16
6 27/3211
------------------------
------------------------
4 23/322 19/3210 1/32
16 25/32
STAINLESS STEEL DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"
2 19/641 27/643 3/326 7/32
2 1/41 19/643 3/326 7/32
2 9/161 9/163 1/46 3/8
3 3/162 3/323 29/327 15/32
3 7/322 5/324 7/327 25/32
3 1/42 3/164 19/328 5/32
------------------------
3 59/642 9/325 23/329 29/32
4 1/162 5/166 27/32
11
------------------------
------------------------
4 35/642 19/3210 1/3216 25/32
RB050EZRB075EZRB100EZRB125EZRB150EZRB200EZRB300EZRB400EZRB600EZ
Stainless Steel
Part #
3/4" x 1/2"3/4"1"
1 1/4"1 1/2"
2"3"4"6"
Part #Size Part #
Aluminum Brass
-----BB075EZBB100EZBB125EZBB150EZBB200EZBB300EZBB400EZ-----
---------------AB100EZAB150EZAB200EZAB300EZAB400EZAB600EZ
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Andrews" Type DC Dust Cap 17
Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.
* "Andrews" and "Boss-Lock" Cam and GrooveCouplings DO NOT INTERCHANGE IN THE8" SIZE.
** See "Boss-Lock" for 1 1/4" and 2 1/2" couplers.• The 8" "Andrews" Dust Cap has 2 cam arms,
unlike the Andrews Type D, which has 4.• Finger rings are not supplied on 1/2" - 1"
"Andrews" couplings.• 1/2" Andrews has only one cam arm.
STAINLESS STEEL DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"
1 3/41 1/4
1 17/322 11/16
1 3/41 1/42 1/84 3/8
2 3/161 9/162 7/165 3/16
2 13/161 29/323 9/167 7/16
------------------------
3 3/322 7/323 15/167 13/16
3 1/162 1/44 7/168 11/32
3 1/82 9/325 15/3210 3/32
3 3/42 19/3210 3/3216 1/4
3 3/82 7/167 9/16
12 3/16
3 35/642 9/326 9/1611 3/16
------------------------
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"
1 13/161 1/4
1 17/322 11/16
2 1/161 3/82 1/84 3/8
2 11/321 21/322 7/165 3/16
2 23/321 7/83 9/167 7/16
2 9/162
3 1/47 5/32
3 1/642 7/323 15/167 13/16
------------------------
3 1/82 1/4
5 15/3210 3/32
3 13/162 5/8
10 3/3216 1/4
3 1/22 5/167 9/1612 3/16
3 21/322 5/166 9/1611 3/16
5 7/163 13/1612 1/3219 31/32
Type DC Dust Cap
---------------150-DC-ALH200-DC-ALH300-DC-ALH400-DC-ALH-----600-DC-ALH-----
UnplatedMalleable Iron Stainless Steel
Part # Part #
50-DC-SS75-DC-SS100-DC-SS150-DC-SS200-DC-SS250-DC-SS300-DC-SS400-DC-SS500-DC-SS600-DC-SS
--------------------200-DC-MI-----300-DC-MI400-DC-MI----------
1/2"3/4"1"
1 1/2"2"3"4"5"6"
8" *
Aluminum
Part #
AluminumHard Coat Brass
Size Part # Part #
50-DC-AL75-DC-AL100-DC-AL150-DC-AL200-DC-AL300-DC-AL400-DC-AL500-DC-AL600-DC-AL800-DC-AL
50-DC-BR75-DC-BR100-DC-BR150-DC-BR200-DC-BR300-DC-BR400-DC-BR500-DC-BR----------
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "Boss-Lock" Type H Dust Cap18
Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.
* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.
• The 8" "Boss-Lock" design has 2 cam arms.• All "Boss-Lock" Couplers come with SAFETY
CLIPS.• The 8" "Boss-Lock" were designed to inter
change with 8" Cam & Groove Couplingsmanufactured by P.T. Coupling.
Type H Dust Cap
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam Arms
Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"2 1/161 31/642 19/325 13/32
2 7/321 9/162 29/325 9/16
2 3/42 3/323 39/647 15/32
2 15/162 3/323 29/327 25/32
3 1/162 3/164 5/168 5/32
3 7/322 1/4
4 13/168 21/32
3 3/82 5/166 11/16
11
3 1/82 19/645 9/169 29/32
------------------------
3 7/82 19/329 5/8
16 5/32
4 9/162 13/1611 5/8
18 11/64
STAINLESS STEEL DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam Arms
Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"1 15/161 7/162 25/325 13/32
2 3/161 9/162 29/325 9/16
2 3/42 3/323 39/647 15/32
2 13/162 5/323 29/327 25/32
3 1/162 3/164 5/168 5/32
------------------------
3 3/82 5/166 11/16
11
3 1/82 9/325 9/169 29/32
------------------------
------------------------
------------------------
PlatedMalleable Iron
Part # Part #
RH075BLRH100BLRH125BLRH150BLRH200BL-----RH300BLRH400BL----------
IH075IH100-----IH150IH200IH250IH300IH400IH600-----
3/4"1"
1 1/4"1 1/2"
2"2 1/2"
3"4"6"
8" *
Aluminum
Part #
Brass
Size Part #
AH075AH100AH125AH150AH200AH250AH300AH400AH600AH800
BH075BH100BH125BH150BH200BH250BH300BH400BH600----
Stainless Steel
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon "EZ Boss-Lock" Type H Dust Cap 19
Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.
UNDER NO CIRCUMSTANCES should the"EZ Boss-Lock" cam arms be used on anyfitting not specifically produced for theiruse.The Aluminum, Brass and Malleable Iron are made fromsand castings. To insure proper functioning of the "EZBoss-Lock" cam arm assemblies, we sort the castings toinsure there is sufficient length and orientation on thelugs on the main casting to engage the lever. We alsobuff or grind the rougher sand cast surface to insure thatthe lever will move freely.The "EZ Boss-Lock" cam arms CANNOT be retrofit-ted onto existing Aluminum, Brass or Plated Mal-leable Iron Boss-Lock already in service.
Dust Cap
STAINLESS STEEL DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6"
1 15/161 7/163 3/325 13/32
2 3/161 9/163 1/45 9/16
2 3/42 3/323 29/327 15/32
2 13/162 5/324 7/327 25/32
3 1/162 3/164 19/328 5/32
------------------------
3 1/82 9/325 23/329 29/32
3 3/82 5/166 27/32
11
3 3/42 19/3210 1/3216 5/32
ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS
ABCD
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms
Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6"
2 1/161 31/643 3/326 7/32
2 7/321 9/163 1/46 3/8
------------------------
2 15/162 3/324 7/327 25/32
3 1/162 3/164 19/328 5/32
3 7/322 1/45 3/328 21/32
3 1/82 19/645 23/329 29/32
3 3/82 5/166 27/32
11
3 7/82 19/3210 1/3216 25/32
Stainless Steel
RH075EZRH100EZRH125EZRH150EZRH200EZ-----RH300EZRH400EZRH600EZ
3/4"1"
1 1/4"1 1/2"
2"2 1/2”
3"4"6"
Part #Size Part #Part #
Aluminum Brass
-----AH100EZ-----AH150EZAH200EZAH250EZAH300EZAH400EZAH600EZ
BH075EZBH100EZ-----BH150EZBH200EZ-----BH300EZBH400EZ-----
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Swaged "EZ Boss-Lock" Type C Couplers20
Developed specifically for chemical transport hoses having Crosslinked Polyethylene (XLPE) orUltra High Molecular Weight Polyethylene (UHMW) tubes. Swaged "Boss-Lock" provides youwith a permanently attached Cam and Groove fitting when superior coupling retention is required.In testing tank transport hoses from a wide variety of manufacturers, the Swaged "Boss-Lock" fittingproved itself to be the clear winner in overall performance.Fittings are also available on special order for other sizes or hose O.D.'s. Consult the Factoryfor pricing and availability.Consult the Factory for pricing and availability of the special equipment required forinstallation.
The largest advantage of the Notched "EZ Boss-Lock"design is that the coupling can be removed from a damagedhose by cutting away the ferrule, without necessarilydamaging the fitting. After inspection to determine itssuitability for reuse, it can be reinstalled into another hoseby using a new ferrule.
The Notched EZ "Boss-Lock" system allows you to bettermanage your inventories. You can stock one coupling andtwo ferrules, and thereby cover the same hose range withless inventory. You must purchase a fitting and thematching ferrule to create an assembly.
Dixon stems and ferrules are specifically designed to beused together as a coupling system. Due to differencesin dimensions and tolerances for safety reasons, do notuse other manufacture's stems or ferrules with DixonCam and Groove or Holedall products.
Coupler x Hose Shankwith Ferrule
Notched "EZ Boss-Lock" Type C Couplers
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsHose Shank O.D.
STAINLESS STEEL DIMENSIONS
Size 1 1/2" 2" 3" 4"
5 7/162 5/324 7/32
7 25/321 9/16
5 11/322 3/16
4 19/328 5/322 1/16
6 19/322 9/32
5 23/329 29/323 3/32
7 3/82 5/16
6 27/3211
4 3/32
Size
3/4"1"1"
Maximum Hose O.D.
1 22/64"1 35/64"1 11/16"
RC075EZ-70RC100EZ-20RC100EZ-70
Stainless Steel Part #
1 6/64"1 29/64"1 9/16"
Minimum Hose O.D.
Coupler x Hose Shank
Ferrule
RC150EZNORC150EZNORC200EZNORC200EZNORC300EZNORC300EZNORC400EZNO
1 1/2"1 1/2"
2"2"3"3"4"
MaximumHose O.D.
StainlessSteel Part #
Stainless SteelNotched Ferrule Part #
Size
1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"
MinimumHose O.D.
2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"
GAS2334NOGAS2370NOGAS2709NOGAS2885NOGAS3760NOGAS3885NOGAS5010NO
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Swaged "Boss-Lock" Type E Adapters 21
Contact the Factory for swage and crimp recommendations.
Developed specifically for chemical transport hoses having CrosslinkedPolyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes. Swaged"Boss-Lock" provides you with a permanently attached Cam and Groove fitting when superiorcoupling retention is required.In testing tank transport hoses from a wide variety of manufacturers, the Swaged "Boss-Lock"fitting proved itself to be the clear winner in overall performance. Fittings are also availableon special order for other sizes or hose O.D.'s. Consult the Factory for pricing and availability.Consult the Factory for pricing and availability of the special equipmentrequired for installation.
Adapter x Hose Shankwith Ferrule
Ferrule
Notched "Boss-Lock" Type E Adapters
STAINLESS STEEL DIMENSIONS
ABC
Overall LengthHose Shank LengthHose Shank O.D.
Size 1 1/2" 2" 3" 4"
4 11/162 3/4
1 9/16
5 3/642 13/162 1/16
6 3/84
3 3/32
7 3/164 1/4
4 3/32
Size
3/4"1"1"
Maximum Hose O.D.
1 22/64"1 35/64"1 11/16"
RE075-1370RE100-1620RE100-1770
Stainless Steel Part #
1 6/64"1 29/64"1 9/16"
Minimum Hose O.D.
GAS2334NOGAS2370NOGAS2709NOGAS2885NOGAS3760NOGAS3885NOGAS5010NO
RE150NORE150NORE200NORE200NORE300NORE300NORE400NO
1 1/2"1 1/2"
2"2"3"3"4"
MaximumHose O.D.
StainlessSteel Part #
Stainless SteelNotched Ferrule Part #Size
1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"
MinimumHose O.D.
2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"
The largest advantage of the Notched "Boss-Lock" design isthat the coupling can be removed from a damaged hose bycutting away the ferrule, without necessarily damaging thefitting. After inspection to determine its suitability forreuse, it can be reinstalled into another hose by using a newferrule.
The Notched "Boss-Lock" system allows you to bettermanage your inventories. You can stock one coupling andtwo ferrules, and thereby cover the same hose range withless inventory. You must purchase a fitting and thematching ferrule to create an assembly.
Dixon stems and ferrules are specifically designed to beused together as a coupling system. Due to differencesin dimensions and tolerances for safety reasons, do notuse other manufacture's stems or ferrules with DixonCam and Groove or Holedall products.
Adapter x Hose Shank
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Swaged "Boss-Lock" Type C Cam and Groove Couplers
Notched NOS Shank Cam and Groove Adapters
Dixon "Andrews" Notched NOS Shank Cam and Groove Couplers
22 Notched NOS Shank Adapters and Couplers
Note: Only use the NOS shank with the NOS ferrules.
The largest advantage of the Notched "Boss-Lock" design is that the coupling can be removedfrom a damaged hose by cutting away the ferrule, without necessarily damaging the fitting.After inspection to determine its suitability for reuse, it can be reinstalled into another hoseby using a new ferrule.The Notched "Boss-Lock" system allows you to better manage your inventories. You can stockone coupling and two ferrules, and thereby cover the same hose range with less inventory. Youmust purchase a fitting and the matching ferrule to create an assembly.
Swaged Assembly Crimped Assembly
Crimped AssemblySwaged Assembly
Fits Hose O.D. From: To:
1-1/2"1-1/2"
2"2"3"3"
Size
1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"
2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"
150ENOSSS150ENOSSS200ENOSSS200ENOSSS300ENOSSS300ENOSSS
StainlessSteel Part #
GAS2334NOSGAS2370NOSGAS2709NOSGAS2885NOSGAS3760NOSGAS3885NOS
304 Stainless SteelFerrule Part #
Ferrule
Coupler x Hose Shank
Ferrule
Adapter x Hose Shank
Coupler x Hose Shank
Ferrule
Note: Only use the NOS shank with the NOS ferrules.
Fits Hose O.D. From: To:
1-1/2"1-1/2"
2"2"3"3"
Size
1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"
2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"
150CNOSSS150CNOSSS200CNOSSS200CNOSSS300CNOSSS300CNOSSS
StainlessSteel Part #
GAS2334NOSGAS2370NOSGAS2709NOSGAS2885NOSGAS3760NOSGAS3885NOS
304 Stainless SteelFerrule Part #
RC150BLNORC150BLNORC200BLNORC200BLNORC300BLNORC300BLNORC400BLNO
1 1/2"1 1/2"
2"2"3"3"4"
MaximumHose O.D.
StainlessSteel Part #
Stainless SteelNotched Ferrule Part #Size
1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"
MinimumHose O.D.
2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"
GAS2334NOGAS2370NOGAS2709NOGAS2885NOGAS3760NOGAS3885NOGAS5010NO
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
The shank design on these fittings was developed specifically for chemical transport hoses having CrosslinkedPolyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes, where shank retention canbe a problem when using conventional band clamps.In testing tank transport hoses from a wide variety of manufacturers, the "Boss-Lock-PF" fitting showed significantimprovement in hose coupling retention over the conventional Cam and Groove shank design.Other sizes are available on special order. Consult the Factory for pricing and availability. For best results werecommend the use of 3/4" wide band clamps found in the current Dixon Price List.
"Boss-Lock-PF" Adapters and Couplers 23
DIMENSIONS
ABC
Overall LengthHose Shank LengthHose Shank O.D.
Size 1 1/2" 2" 3"
5 1/642 3/4
1 9/16
5 13/322 13/162 1/16
6 3/44
3 3/32
DIMENSIONS
ABCDE
Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsHose Shank O.D.
Size 1 1/2" 2" 3"
5 7/162 3/324 7/32
7 25/321 9/16
52 3/16
4 19/328 5/322 1/16
72 5/16
5 23/329 29/323 3/32
Stainless Steel Part #
RE150PFRE200PFRE300PF
1 1/2"2"3"
Size
Type E Adapter x Special Hose Shank
Type C Coupler x Special Hose Shank
Stainless Steel Part #
RC150EZPFRC200EZPFRC300EZPF
1 1/2"2"3"
Size
Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991
Dixon / "Andrews" Reducing Couplers x Adapters24
Adapter
Coupler
Adapter
Coupler
"Boss-Lock" and "EZ Boss-Lock" Reducing Couplers x Adapters
Dixon Valve & Coupling Company800 High StreetChestertown, MD 21620
All measurements in this brochure are for reference only and are subject to change. Where dimensions arecritical, please consult the factory. For products not shown or special application questions, pleaseconsult the factory.
RDA2030BL----------------
RDA3020BLRDA3040BLRDA4020BLRDA4030BLRDA6040BL
--------
ADA2030ADA2520ADA2530ADA3020ADA3040ADA4020ADA4030ADA6040ADA8060
BOSS-LOCKAluminum
Part #Coupler
x AdapterStainless Steel
Part #
2" x 3"2 1/2" x 2"2 1/2" x 3"
3" x 2"3" x 4"4" x 2"4" x 3"6" x 4"8" x 6"
2" x 3"
3" x 2"3" x 4"4" x 2"4" x 3"6" x 4"
RDA2030EZ
RDA3020EZRDA3040EZRDA4020EZRDA4030EZRDA6040EZ
ADA2030EZ
ADA3020EZADA3040EZADA4020EZADA4030EZADA6040EZ
EZ BOSS-LOCK
Stainless SteelPart #
AluminumPart #
Couplerx Adapter
* Two cam arm, "Andrews" design.
1015-DA-AL1510-DA-AL1520-DA-AL2010-DA-AL2015-DA-AL2025-DA-AL2030-DA-AL2040-DA-AL
----------
3015-DA-AL3020-DA-AL3025-DA-AL3040-DA-AL3060-DA-AL4020-DA-AL4025-DA-AL4030-DA-AL4050-DA-AL4060-DA-AL5030-DA-AL5040-DA-AL5060-DA-AL6030-DA-AL6040-DA-AL6050-DA-AL8060-DA-AL*
1" x 1 1/2"1 1/2" x 1"1 1/2" x 2"
2" x 1"2" x 1 1/2"2" x 2 1/2"
2" x 3"2" x 4"
2 1/2" x 2"2 1/2" x 3"3" x 1 1/2"
3" x 2"3" x 2 1/2"
3" x 4"3" x 6"4" x 2"
4" x 2 1/2"4" x 3"4" x 5"4" x 6"5" x 3"5" x 4"5" x 6"6" x 3"6" x 4"6" x 5"8" x 6"
Coupler x Adapter AluminumPart #
© 2002 DVCC CGB7011P15M
Adapter
Coupler
Adapter
Coupler
Aluminum HardCoat Part #
-------------------------------------------------------
3020-DA-ALH-------------------------
4030-DA-ALH---------------------------------------------
BrassPart #
-------------------------------------------------------
3020-DA-BR-----
3040-DA-BR---------------
4030-DA-BR------------------------------
6040-DA-BR----------
Malleable IronPart #-------------------------------------------------------
3020-DA-MI-------------------------
4030-DA-MI------------------------------
6040-DA-MI----------
1015-DA-SS1510-DA-SS1520-DA-SS2010-DA-SS2015-DA-SS2025-DA-SS2030-DA-SS2040-DA-SS2520-DA-SS2530-DA-SS3015-DA-SS3020-DA-SS3025-DA-SS3040-DA-SS3060-DA-SS4020-DA-SS4025-DA-SS4030-DA-SS
-----4060-DA-SS5030-DA-SS5040-DA-SS5060-DA-SS6030-DA-SS6040-DA-SS6050-DA-SS
-----
StainlessSteel Part #