CADalog FINAL

I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y S M

C A D A L O GS M

I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G

S M

Diagnostic pg. 1

Preparation & Capture pg. 2

Desensitization pg. 6

Milling pg. 7

Characterization pg. 9

Ceramic Preparation pg. 14

Cementation pg. 15

Bonding Agents pg. 17

Polymerization pg. 18

Recall & Care pg. 19

Ordering Information pg. 20

T a b l e o f C o n t e n t s


S M

The CRT Bacteria Caries Risk Test makes

bacteria visible. Micro-organisms, mutans

streptococci, and lactobacilli in particular

play a decisive role in the development of

caries. They can harm both healthy as well

as restored teeth.

Consequently, it is very important to gather

information about the existence of these

micro-organisms as early as possible and on

a regular basis.

The CRT Bacteria Caries Risk Test facilitates

the detection of mutans streptococci and

lactobacilli in saliva.

ADVANTAGES FOR CAD/CAM:

F Provides preventive plan to ensure

long term clinical success of the

final restoration

C R T ® B a c t e r i a C a r i e s R i s k T e s t

Di

ag

no

st

ic

1


S M

OptraDam is a completely new type of rubber dam

that is used without separate frames and does not

require metal clamps.

The use of a flexible integrated frame allows for

three-dimensional movement and unsurpassed

patient comfort. The OptraDam uses non-

radiolucent materials allowing it to remain in place

while x-rays are being taken.


F Simple and quick isolation for

preparation and successful

cementation

F Integrated frame - no painful

metal clamps required

F Three-dimensional anatomical

design that ensures reduced

tension

Pr

ep

ar

at

io

n&

Ca

pt

ur

e

O p t r a D a m ®

A n a t o m i c a l l y S h a p e d R u b b e r D a m

2


S M

OptraGate is an auxiliary aid that enables the treatment field to be

enlarged easily, effectively and comfortably. OptraGate is comfortable

to wear over long periods of time, as it is three–dimensionally flexible.

The three-dimensional elasticity allows unimpeded jaw movements

during the entire procedure. OptraGate is entirely latex-free and is

available in three sizes: “Junior”, “Small” and “Regular.”


F Creates excellent access for image capture

F Three-dimensionally flexible

F Can be inserted and removed easily and quickly


F Surface reflectivity designed specifically for

use with CAD/CAM

F Incorporate antagonist data into the virtual

model quickly and accurately

O p t r a G a t e ®

L i p a n d C h e e k R e t r a c t o r

V i r t u a l C A D b i t e ®

3

Pr

ep

ar

at

io

n&

Ca

pt

ur

e

Virtual CADbite is a bite

registration material with

surface reflective properties

that are optimized for

scanning with CAD/CAM

systems. The material demonstrates a non-slump consistency,

short setting time and good dimensional stability while providing

superior detail reproduction.

Virtual CADbite sets in just 45 seconds. With a high final hardness

of 32 Shore-D and high fracture toughness, Virtual CADbite makes

for easy trimming and grinding.

Photography by Dr. Tony Soileau


S M

The Odyssey diode lasers utilize the latest diode technology available in

dentistry today. With a wavelength of 810 nanometers, they have the highest

affinity for soft tissue, making them an invaluable tool for everyday soft tissue

procedures. Unique fiber management, aiming beam control, and simple

intuitive key pad design make the Odyssey lasers the most efficient, portable,

and affordable soft tissue lasers in dentistry today.

Powering the Odyssey diode laser design is a passion for better dentistry made

possible through the use of the most sophisticated, precise and minimally

invasive technology available. The Odyssey diode laser cuts and coagulates at

the same time, thereby facilitating immediate hemostasis, less tissue charring,

less postoperative healing time and fewer postoperative complications,

including less chance of infection.

ALL ODYSSEY MODELS FEATURE:F High quality design, customer support and a one-year warranty.

F Laser wavelength of 810nm, which has the highest affinity for hemoglobin

and melanin with the benefit of being the least invasive and least traumatic

instrument to perform soft tissue procedures.

F Adjustable aiming beam to assist with the location and placement

of the laser.

F Capability to perform a variety of procedures, including:

F Tissue Troughing to optimize optical impressions

F Hemostasis

F Gingivectomy

F Clinical Crown Lengthening

F Implant uncovering and tissue recontouring

O d y s s e y ® L a s e r s

4

Pr

ep

ar

at

io

n&

Ca

pt

ur

e

5


F Controls bleeding that can occur during preparation

F Troughs soft tissue around the preparation optimizing the optical image

F Maintains hemostasis and moisture control duringcementation

Odyssey 3Watt Soft TissueDiode Laser

The Odyssey lasers are available in three models designed to meet

every dental professional’s needs:

ODYSSEY NAVIGATOR

The Odyssey Navigator features technology that provides more

convenience, easier operation, more flexibility and unmatched portability.

F Touch screen monitor

• Intuitive design and navigation ability make program selection

and activation simple and easy.

• Inverted screen capability

• Allow for incredible flexibility by keeping the screen readable

in any orientation.

F Wireless foot pedal

• The first dental laser featuring wireless technology for portability,

flexibility and ease of use. Powered with a 9 volt lithium battery

that provides over 100 hours of continuous operation.

F Ergonomic handpiece design

• Unique arc design fits comfortably in your hand

F Uni-dose fiber tips

• No cleaving, no stripping of fiber – just snap on and

you’re ready to lase.

F Lithium ion battery

• 45 minutes of portable lasing

ODYSSEY 2.4GF 5 Watts of power

F Wireless Pedal

F Programmability for most utilized settings

F Offers one manual setting set as a default from the factory with

1.0W, full aiming beam in a continuous mode.

F Three user-defined programs. Each determines power, mode of

operation and aiming beam intensity of illumination.

ODYSSEY 3WATT

F 3 Watts of power ideal for most soft tissue applications

F Corded foot pedal

F Manual programming

O d y s s e y ® L a s e r s

Odyssey 2.4G Soft TissueDiode Laser

Odyssey Navigator


S M

Pr

ep

ar

at

io

n&

Ca

pt

ur

e


S M

De

se

ns

itiz

at

ion

S y s t e m p ® . d e s e n s i t i z e r

Systemp.desensitizer consists of 5% glutaraldehyde and 35%

polyethylene glycol dimethacrylate in an aqueous solution.

The combination penetrates dentin tubules and forms protein

plugs that seal the tubules and reduce hypersensitivity.

Systemp.desensitizer reduces post-op sensitivity during the

temporization phase and following placement of

the final restoration.

INDICATIONS:

F Provides comfort between preparation and placement

F Under temporary restorations

F Rewetting agent prior to cementation

CAD/CAM APPLICATION

Simply soak a cotton pellet with Systemp.desensitizer

and place in the preparation. Systemp.desensitizer calms

the preparation, occluding dentinal tubuli and providing

comfort while CAD/CAM restorations are being

milled, polished or characterized.


F Provides patient comfort during time from preparation

to placement

6

Dentistry by Dr. Tom Teel

Soak cotton pellet withSystemp.desensitizer

Place cotton in the preparation


S M

IPS EMPRESS CAD LEUCITE-REINFORCED GLASS CERAMIC BLOCK FOR CAD/CAM DENTISTRY

IPS Empress® CAD is the esthetic leucite-reinforced glass ceramic for the

efficient fabrication of single-unit restorations through CAD/CAM

technology. By optimizing the manufacturing processes, a new material

was created with a more homogeneous leucite crystal distribution providing

a glass ceramic with an increased flexural strength of 160 MPa.

IPS EMPRESS CAD HT (HIGH TRANSLUCENCY)

Features a high degree of translucency, making the HT blocks ideally

suited for the fabrication of smaller restorations (e.g. inlays and onlays).

Restorations fabricated with the HT blocks demonstrate a true-to-nature

chameleon effect and outstanding adaptation to the residual tooth

structure. The blocks simulate the life-like fluorescence in order to permit

optimum integration into the natural residual tooth structure.

IPS EMPRESS CAD LT (LOW TRANSLUCENCY)

Features a lower degree of translucency, making them ideal for most full

coverage restorations (e.g. full crowns, large partial coverage restorations,

and veneers). The LT blocks are less translucent, which makes them appear

higher in value, therefore resulting in a brighter restoration.

IPS EMPRESS CAD MULTI

With multiple translucencies and a balanced blend of chroma from gingival

to incisal, IPS Empress CAD Multi offers dental professionals a fusion of

color that provides the natural gradients to replicate dentin and enamel in

a single block.

With the proven high strength (160 MPa) of IPS Empress CAD leucite-

reinforced glass ceramic, the IPS Empress CAD Multi can be either polished

or glazed to obtain maximum functional and esthetic results. IPS Empress

CAD Multi is available in the most popular A-D shades. They are ideal for

the fabrication of full and partial coverage restorations as well as veneers.


F IPS Empress is the most trusted brand in all-ceramics

due to its proven quality and outstanding esthetics

F Offers the most comprehensive range of shades and sizes

F IPS Empress CAD Multi provides a true blend of

translucencies and chromas

F Fluorescence matches that of natural tooth structure

I P S E m p r e s s ® C A D

Mi

ll

in

g

7


S M

IPS e.MAX

When Ivoclar Vivadent introduced IPS e.max, it provided dental

professionals with a highly esthetic, high strength, conventionally

cementable restoration. Delivering the ultimate in metal-free

esthetics and strength, IPS e.max is the ideal choice when

conventional cementation is desired, for multiple units and for

combination cases.

IPS e.MAX CAD LT

As soon as you see it you will know it is unique. Blue in color, IPS e.max

CAD LT is delivered in a precrystallized form that is ideal for milling full

contour restorations. After milling, IPS e.max CAD LT is crystallized in a

standard porcelain oven where it undergoes a dramatic change and the

final physical properties are established. IPS e.max CAD LT is highly

esthetic and offers 360 MPa of strength.

IPS e.MAX CAD CRYSTALL GLAZE, SHADES AND STAINS

IPS e.max CAD Crystall characterization materials can be used to make

precise and esthetic characterizations to IPS e.max CAD LT restorations.

Glaze, Shades, and Stains can be applied prior to crystallization of the

restoration, allowing for a single firing cycle to produce a high strength

yet highly esthetic and customized restoration.

Mi

ll

in

g

I P S e . m a x ®

8

IPS e.max CAD LT

IPS e.max CAD Crystall Shades

The uncrystallized IPS e.max CAD LT restoration

Final IPS e.max CAD LT restoration


S M

F u r n a c e T e c h n o l o g y

PROGRAMAT® CS

Featuring a small footprint, easy to use interface,

innovative QTK (Quartz Tube Kanthal) heating

technology, and automatic temperature calibration,

the Programat CS is the all-new chairside furnace

designed specifically for the clinician. From stain

and glaze to crystallization, the Programat CS is

fully equipped to meet the needs of today’s

CAD/CAM office.

IPS E.MAX CAD CRYSTALLIZATION TRAY

For crystallization, IPS e.max CAD LT is fired on the

IPS e.max CAD Crystallization Tray which includes

9 crystallization pins in 3 different sizes (3 pins of

each size). This firing tray stores heat and ensures

slow and tension-free cooling of the restorations.

PROGRAMAT® FIRING TRAY

The honeycomb tray and pins allow proper air flow

around the restoration during the firing process,

optimizing the esthetics of the final restoration.

IPS OBJECT FIX FLOW AND OBJECT FIX PUTTY

IPS Object Fix Flow and Putty are auxiliary firing

pastes used to support all ceramic restorations

during the firing and/or crystallization procedure.

The pastes are used to stabilize and secure the

corresponding restorations on the IPS e.max CAD

Crystallization tray with pins.

IPS Object Fix Flow and Putty

Programat Firing Tray for IPS Empress CAD

Crystallization Tray for IPS e.max CAD LT

Programat CS

Ch

ar

ac

te

riz

at

ion

9


S M

Ch

ara

cteriz

atio

n

10

The light-curing material simulates the shade of the

preparation. The clinician uses the IPS Natural Die

Material Shade Guide to determine the preparation

shade and provide the optimum basis on which the

shade of the original tooth can be reproduced

during the subsequent finishing of the restoration.


F Creates a functional “holder” for

the restoration

F Mimics the underlying tooth color

of the final restoration so the clinician

can optimize color and esthetics

I P S N a t u r a l D i e M a t e r i a l


S M

Ch

ar

ac

te

riz

at

ion

C h a r a c t e r i z i n gI P S E m p r e s s ® C A D R e s t o r a t i o n s

The goal with the IPS Empress CAD line is to

continue the tradition of excellence in esthetics

and function utilizing simple, predictable and

effective techniques. The following are ways to

replicate natural chromas and translucencies:

INTERNAL CHARACTERIZATION

TETRIC COLOR

A basic internal characterization can be easily

achieved using Tetric Color by simply applying a

thin layer on the desired internal area and then

light-curing it. Tetric Color is applied after etching

and silanating the ceramic.

EXTERNAL CHARACTERIZATION

IPS EMPRESS UNIVERSAL SHADES AND STAINS

A more refined characterization can be obtained

when using IPS Empress Universal Shades and

Stains. Shade/Stain application can be combined

with Glazing in a one-step technique, then rapidly

fired using the Programat® CS

OPTRAFINE® POLISHING SYSTEM

OptraFine is a diamond polishing system

developed for dental ceramic/porcelain

materials. Comprised of rubberized

polishers, nylon brushes and a ceramic

polishing paste, the system can be used

intra-orally or extra-orally and is highly

suited for CAD/CAM restorations.

11


S M

T e t r i c ® C o l o rTetric Color is a system of light-curing composite stains for

individualized characterizations. They are ideally suitable

for internal characterizations of IPS Empress CAD

restorations (e.g. veneers). After application of the stains,

they are polymerized with a curing light (i.e. bluephase®

family). No further ceramic firing cycles should be

conducted after the “internal characterization” with

Tetric Color. This technique is mainly used chairside.

INDICATIONS

F Internal characterization of IPS Empress CAD

restorations

F Individualized shade characterization of direct and

indirect composite restorations

F Masking of discoloration of the tooth structure


F Fast, easy application

F Creates permanent color modification with

no furnace firing

I n t e r n a l C h a r a c t e r i z a t i o n

Tetric Color

Dentistry by Dr. Doug Voiers

Ch

ara

cteriz

atio

n

12


S M

IPS EMPRESS UNIVERSAL SHADES & STAINS

IPS Empress Universal Shades & Stains are ideal for

external staining and characterization of IPS Empress

restorations. The subsequent glaze firing is

conducted using IPS Empress Universal Glaze.

INDICATIONS

F Used to reproduce A-D shades

F Used with IPS Empress Esthetic and

IPS Empress CAD restorations

OPTRAFINE POLISHING SYSTEM

The OptraFine polishing system should be used with

slow-speed handpieces at rotary speeds of 10,000 –

15,000 rpm. Combine OptraFine with the IPS

Empress CAD Multi block for optimal esthetic results.

ADVANTAGES FOR CAD/CAM

F Quick and easy high-gloss polishing of IPS

Empress CAD restorations

F No shades or stains needed for a characterized

look when combined with IPS Empress CAD

Multi blocks

Ch

ar

ac

te

riz

at

ion

Shading/Staining Technique

OptraFine before

OptraFine during

OptraFine after

13

E x t e r n a l C h a r a c t e r i z a t i o n

I P S E m p r e s s ®

C h a r a c t e r i z a t i o n


S MC

er

am

icP

re

pa

ra

tio

n

14

Preparation of the all-ceramic material is a

critical element to the clinical success of the final

cemented restoration. Proper treatment of the

ceramic includes roughening the surface and

applying silane to the ceramic.

Hydroflouric etch is applied to the ceramic and

is roughens the all-ceramic surface. Silane is

applied to the etched surface and creates a

chemical link with the ceramic and cement.

Etching of all-ceramic surfaces varies based on

the chemical structure of the material.

Treatment protocol for each type of ceramic is

indicated below:

IPS Empress CAD (leucite reinforced glass):

F Hydroflouric etch for 60 seconds

F Apply silane and leave on for 60 seconds,

then blow dry

IPS e.max CAD LT

F Hydroflouric etch for 20 seconds

F Apply silane and leave on for 60 seconds, then blow dry

C e r a m i c P r e p a r a t i o n

IPS CERAMIC ETCH

4% hyrdrofluoric acid is designed to etch the internal aspects of all-ceramic

restorations, preparing the restoration for cementation.

IPS Ceramic Etch

:60SEC

:60SEC

:20SEC

:60SEC


S M

MULTILINK AUTOMIX - UNIVERSAL ADHESIVE RESIN CEMENT

Multilink Automix is a universal, dual-curing, self-etching cement for the fast and

reliable adhesive luting of indirect restorations made of all types of material.

Multilink Automix may be applied directly to the restoration, making manual mixing

obsolete.

Multilink Automix is used in combination with self-etching and self-curing

Multilink Primer A/B. Acting as a primer for dentin, Multilink Primer A/B provides

good marginal adaptation and high bond strength.


F Provides immediate high bond strength to all-ceramic

CAD/CAM restorations

F Self-etch system reduces the number of steps and eliminates post-op sensitivity

F Fast self-curing material with light-curing option

F Easy application, no equipment required

F Three shades: Yellow, Transparent, Opaque

M u l t i l i n k ® & V a r i o l i n k ®

Multilink Automix

Ce

me

nt

at

io

n

15


S M

Ce

me

nt

at

io

n

VARIOLINK VENEER - ESTHETIC RESIN CEMENT

Variolink Veneer offers exceptionally easy clean up and is ideal when placing multiple

anterior all-ceramic restorations. The seven light-cure value shades enhance the

esthetics of the final restoration. The Medium Value (MV 0) is highly translucent and

has little effect on the final restoration. The High Value shades

allow the clinician to brighten or increase the value of the restoration and

the Low Value shades provide a "warming" effect to the final restoration.

Variolink Veneer is amine-free, providing a high degree of color stability

ensuring outstanding esthetics.


F Provide highly esthetic resin cement with exceptionally easy set up

for anterior crowns and veneers

VARIOLINK II - ESTHETIC RESIN CEMENT

The dual-curing luting composite Variolink II has been used for more than 15 years in

over 20 million restorations throughout the world. Numerous awards in the category

of adhesive luting composites and excellent results from clinical long-term studies are

testimony to its success.


F Six shades, three degrees of translucencies, two consistencies

F Total etch technique

F High bond strength

F High radiopacity

F Light-cure only and dual-cure polymerization options

16

Variolink II

Variolink Veneer


S M

B o n d i n g A g e n t s

ExciTE DSC

ExciTE

Bo

nd

ing

Ag

en

ts

EXCITE® - SINGLE-COMPONENT ADHESIVE

ExciTE is an alcohol-based light-curing single-component bonding agent for enamel

and dentin bonding.

As ExciTE contains ethanol as the solvent, the adhesive is highly tolerant of different

working techniques and moisture conditions of dentin. Unlike acetone-based bonding

agents, ExciTE does not evaporate too quickly when the bottle is open.

The nanometric fillers ensure a visible glossy coat during the application of ExciTE.

This glossy coat enables the operator to check the coverage of the adhesive layer.

Because of their small size, the particles are able to penetrate into opened dentinal

tubules. A polymerized coat of ExciTE is less than eight micrometers thick.

Consequently, polymerization prior to the cementation of indirect restorations

does not compromise the accuracy of fit.


F One step application

F Very low film thickness - does not affect fit

F High bond strength

EXCITE® DSC - DUAL-CURE SINGLE-COMPONENT ADHESIVE

ExciTE DSC is a dual-curing single-component adhesive. ExciTE DSC is suitable for

use in conjunction with dual and self-curing luting composites and restorative and

core build-up composites. Therefore, it can be used in situations where a curing

light is ineffective.


F Easy preparation - single-dose and single component

F Easy and quick - application in one layer, no light-curing required

F More convenient processing - no mixing, no light-curing, no interference

with the accuracy of fit of the restoration

F High economic efficiency - the single-dose form of application ensures

hygiene and fresh adhesive for each application

17

ExciTE VivaPen


S M

Po

ly

me

ri

za

ti

on

&F

in

is

hi

ng

P o l y m e r i z a t i o n

bluephase 16i

BLUEPHASE® 16I - LED CURING LIGHT

The bluephase 16i is a cordless high-performance LED light for all clinical indications.

The light produces 1,600 mW/cm2 of light intensity offering a 5 second cure for most

dental materials. The bluephase 16i draws its power from a lithium-ion battery

providing 45 minutes of continuous use. It also offers the unique “Click and Cure”

function in the event the battery reaches the limits of its charge.


F 1,600 mW/cm2 for fast curing

F Multiple output programs

F Cordless construction for ease of use

F ”Click and Cure” function

F Ergonomic design reduces fatigue

18

BLUEPHASE® G2 – LED CURING LIGHT

The bluephase G2 provides halogen-like curing confidence in a cordless LED package.

The new Polywave LED displays a broad wavelength light to cure all dental materials

currently on the market. An advanced lithium polymer battery yields 60 minutes of

continuous use but bluephase G2 also includes the unique “Click and Cure” feature

should the battery run down.


F Polywave LED to cure all materials

F Three power settings

F Cooling fan for continuous use

F Cordless portability

F Click and Cure corded back-up power

F Separate digital radiometerbluephase G2


S M

R e c a l l & C a r e

Proxyt kit

PROXYT® PROFESSIONAL TOOTH CLEANING PASTE

Paste for professional tooth cleaning and polishing. Gentle removal of bacterial plaque.

The systematic professional cleaning and polishing of teeth and restoration surfaces is a basic

measure for preventing caries and periodontal disease. The Proxyt prophylaxis pastes clean

effectively, yet are gentle. The pastes do not wear the tooth structure unnecessarily or

roughen the surfaces of restorations.


F Gentle on CAD/CAM ceramic restorations

F Three levels of abrasion: fine, medium, coarse

F Contains xylitol and fluoride

F No splattering

Re

ca

ll&

Ca

re

19


S M

Diagnostic

NA6556001 CRT System KitContents:1 - CRT Bacteria Standard Package1 - Cultura Incubator10 - CRT BeakersLiterature Support

553543 CRT Bacteria Standard PackageContents:6 - CRT Bacteria Dip Slides (SM & LB)6 - Paraffin Pellets6 - Disposable Pipettes6 - NaHC03 Tablets

556007 CRT Beakers (10/pk)

538325 Cultura Incubator

Preparation & Capture

577272 OptraDam® AssortmentContents:40 - OptraDam Regular40 - OptraDam Small

OptraDam® RefillsContents:80 - OptraDam

593426 Regular

593427 Small

593425 OptraDam® Promo PackContents:4 - OptraDam Regular4 - OptraDam Small

598984 OptraDam® Risk-Free Assortment Contents:1 - OptraDam Assortment 1 - OptraDam Promo Pack(A total of 88 OptraDams)

577275 OptraGate® AssortmentContents:40 - OptraGate (Regular)40 - OptraGate (Small)

OptraGate® RefillsContents:80 - OptraGate disposable lip & cheek retractors

590850 Regular

590851 Small

591451 Junior

590852 OptraGate® Promo PackContents:4 - OptraGate (Regular)4 - OptraGate (Small)

598985 OptraGate® Risk Free AssortmentContents:1 - OptraGate Assortment 1 - OptraGate Promo Pack(A total of 92 OptraGates)

Virtual CADbite®

607908 Virtual CADbite Refills Contents:2 - 50ml Cartridges12 - Mixing Tips

607909 Virtual CADbite Multi PacksContents:12 - 50ml Cartridges72 - Mixing Tips

562845 Virtual Mixing Tips RefillsContents:48 - Mixing Tips

603302 Odyssey® Navigator 3 Watt Diode Laser with Accessories

595126 Odyssey® 2.4G Diode Laser with Accessories

603286 Odyssey® 3Watt Diode Laser

O r d e r i n g I n f o r m a t i o n

20


S M

Desensitization

559596 Systemp®.desensitizer Refill BottleContents:1 - Bottle, 5 g

561386 Systemp®.desensitizer Single Dose RefillContents:50 - Single dose vessels, 0.1 g each

Milling

IPS Empress® CAD for E4D

602610 IPS Empress® CAD Basic Starter KitContents:1 - IPS Empress CAD Refill (5 blocks) HT A1 I121 - IPS Empress CAD Refill (5 blocks) HT A2 I121 - IPS Empress CAD Refill (5 blocks) HT A3 I121 - IPS Empress CAD Refill (5 blocks) HT B1 I121 - IPS Empress CAD Refill (5 blocks) LT A1 C141 - IPS Empress CAD Refill (5 blocks) LT A2 C141 - IPS Empress CAD Refill (5 blocks) LT A3 C141 - IPS Empress CAD Refill (5 blocks) LT B1 C141 - IPS Empress CAD Refill (5 blocks) LT BL2 C141 - IPS Empress CAD Refill (5 blocks) Multi A1 C14 L1 - IPS Empress CAD Refill (5 blocks) Multi A2 C14 L1 - IPS Empress CAD Refill (5 blocks) Multi A3 C14 L1 - IPS Empress CAD Shade guide1 - Multilink Automix Syringe (Transparent)1 - Multilink Primer A1 - Multilink Primer B1 - OptraFine Assortment4 – OptraGate (Regular)4 – OptraGate (Small)4 – OptraDam (Regular)4 – OptraDam (Small)1 - Virtual CADbite1 - Var. accessories

IPS Empress® CAD Block RefillsContents:5 blocks per refill

Multi Blocks

602695 IPS Empress CAD for E4D Multi A1 I12602696 IPS Empress CAD for E4D Multi A2 I12602697 IPS Empress CAD for E4D Multi A3 I12602698 IPS Empress CAD for E4D Multi A3.5 I12602699 IPS Empress CAD for E4D Multi B1 I12608229 IPS Empress CAD for E4D Multi BL1 I12608339 IPS Empress CAD for E4D Multi BL3 I12602701 IPS Empress CAD for E4D Multi A1 C14

602702 IPS Empress CAD for E4D Multi A2 C14602703 IPS Empress CAD for E4D Multi A3 C14602704 IPS Empress CAD for E4D Multi A3.5 C14602705 IPS Empress CAD for E4D Multi B1 C14608340 IPS Empress CAD for E4D Multi BL1 C14608341 IPS Empress CAD for E4D Multi BL3 C14602707 IPS Empress CAD for E4D Multi A1 C14L602708 IPS Empress CAD for E4D Multi A2 C14L602709 IPS Empress CAD for E4D Multi A3 C14L602710 IPS Empress CAD for E4D Multi A3.5 C14L602711 IPS Empress CAD for E4D Multi B1 C14L

LT Blocks

602646 IPS Empress CAD for E4D LT A1 V12602647 IPS Empress CAD for E4D LT A2 V12602648 IPS Empress CAD for E4D LT A3 V12602650 IPS Empress CAD for E4D LT A1 I10602651 IPS Empress CAD for E4D LT A2 I10602652 IPS Empress CAD for E4D LT A3 I10602653 IPS Empress CAD for E4D LT A3.5 I10602654 IPS Empress CAD for E4D LT B1 I10602655 IPS Empress CAD for E4D LT B2 I10602656 IPS Empress CAD for E4D LT B3 I10602657 IPS Empress CAD for E4D LT C2 I10602658 IPS Empress CAD for E4D LT D3 I10602660 IPS Empress CAD for E4D LT A1 I12602661 IPS Empress CAD for E4D LT A2 I12602662 IPS Empress CAD for E4D LT A3 I12602663 IPS Empress CAD for E4D LT A3.5 I12602664 IPS Empress CAD for E4D LT B1 I12602665 IPS Empress CAD for E4D LT B2 I12602666 IPS Empress CAD for E4D LT B3 I12602667 IPS Empress CAD for E4D LT C2 I12602668 IPS Empress CAD for E4D LT D3 I12602670 IPS Empress CAD for E4D LT A1 C14602671 IPS Empress CAD for E4D LT A2 C14602672 IPS Empress CAD for E4D LT A3 C14602673 IPS Empress CAD for E4D LT A3.5 C14602674 IPS Empress CAD for E4D LT B1 C14602675 IPS Empress CAD for E4D LT B2 C14602676 IPS Empress CAD for E4D LT B3 C14602677 IPS Empress CAD for E4D LT C2 C14602678 IPS Empress CAD for E4D LT D3 C14602680 IPS Empress CAD for E4D LT BL1 I10602681 IPS Empress CAD for E4D LT BL2 I10602682 IPS Empress CAD for E4D LT BL3 I10602683 IPS Empress CAD for E4D LT BL4 I10602685 IPS Empress CAD for E4D LT BL1 I12602686 IPS Empress CAD for E4D LT BL2 I12602687 IPS Empress CAD for E4D LT BL3 I12602688 IPS Empress CAD for E4D LT BL4 I12602690 IPS Empress CAD for E4D LT BL1 C14602691 IPS Empress CAD for E4D LT BL2 C14602692 IPS Empress CAD for E4D LT BL3 C14602693 IPS Empress CAD for E4D LT BL4 C14


21


S M

HT Blocks

602612 IPS Empress CAD for E4D HT A1 V12602613 IPS Empress CAD for E4D HT A2 V12602614 IPS Empress CAD for E4D HT A3 V12602616 IPS Empress CAD for E4D HT A1 I8602617 IPS Empress CAD for E4D HT A2 I8602618 IPS Empress CAD for E4D HT A3 I8602619 IPS Empress CAD for E4D HT A3.5 I8602620 IPS Empress CAD for E4D HT B1 I8602621 IPS Empress CAD for E4D HT B2 I8602622 IPS Empress CAD for E4D HT B3 I8602623 IPS Empress CAD for E4D HT C2 I8602624 IPS Empress CAD for E4D HT D3 I8602626 IPS Empress CAD for E4D HT A1 I10602627 IPS Empress CAD for E4D HT A2 I10602628 IPS Empress CAD for E4D HT A3 I10602629 IPS Empress CAD for E4D HT A3.5 I10602630 IPS Empress CAD for E4D HT B1 I10602631 IPS Empress CAD for E4D HT B2 I10602632 IPS Empress CAD for E4D HT B3 I10602633 IPS Empress CAD for E4D HT C2 I10602634 IPS Empress CAD for E4D HT D3 I10602636 IPS Empress CAD for E4D HT A1 I12602637 IPS Empress CAD for E4D HT A2 I12602638 IPS Empress CAD for E4D HT A3 I12602639 IPS Empress CAD for E4D HT A3.5 I12602640 IPS Empress CAD for E4D HT B1 I12602641 IPS Empress CAD for E4D HT B2 I12602642 IPS Empress CAD for E4D HT B3 I12602643 IPS Empress CAD for E4D HT C2 I12602644 IPS Empress CAD for E4D HT D3 I12

IPS e.max CAD LT for E4D

602434 IPS e.max® CAD LT Basic Starter KitContents:1 - IPS e.max CAD LT Refill (5 blocks) BL2 C141 - IPS e.max CAD LT Refill (5 blocks) A1 C141 - IPS e.max CAD LT Refill (5 blocks) A2 C141 - IPS e.max CAD LT Refill (5 blocks) A3 C141 - IPS e.max CAD LT Refill (5 blocks) A3.5 C141 - IPS e.max CAD LT Refill (5 blocks) B1 C141 - IPS e.max CAD Crystall Shade 01 - IPS e.max CAD Crystall Shade 11 - IPS e.max CAD Crystall Shade 21 - IPS e.max CAD Crystall Shade 31 - IPS e.max CAD Crystall Shade 41 - IPS e.max CAD Crystall Shade I11 - IPS e.max CAD Crystall Shade I21 - IPS e.max CAD Crystall Stain white1 - IPS e.max CAD Crystall Stain cream1 - IPS e.max CAD Crystall Stain sunset1 - IPS e.max CAD Crystall Stain copper1 - IPS e.max CAD Crystall Stain olive1 - IPS e.max CAD Crystall Stain khaki1 - IPS e.max CAD Crystall Stain mahogany1 - IPS e.max CAD Crystall Glaze Paste1 - IPS e.max CAD Crystall Glaze Spray

1 - IPS e.max CAD Crystall Shade/Stain Liq.1 - IPS e.max CAD Crystall Add-On1 - IPS e.max CAD Crystall Add-On Liq.1 - IPS e.max CAD Crystallization Tray1 - IPS Object Fix Flow1 - IPS Object Fix Putty1 - IPS Ceramic Etching Gel1 - Virtual CADbite1 - IPS e.max Press/CAD LT Shade Guide1 - Var. accessories

IPS e.max® CAD LT BlocksContents:5 blocks per refill

605400 IPS e.max CAD LT for E4D A1 I12605401 IPS e.max CAD LT for E4D A2 I12605402 IPS e.max CAD LT for E4D A3 I12605403 IPS e.max CAD LT for E4D A3.5 I12605404 IPS e.max CAD LT for E4D B1 I12605405 IPS e.max CAD LT for E4D B2 I12605406 IPS e.max CAD LT for E4D B3 I12605407 IPS e.max CAD LT for E4D C2 I12605408 IPS e.max CAD LT for E4D D3 I12605420 IPS e.max CAD LT for E4D BL1 I12605421 IPS e.max CAD LT for E4D BL2 I12605422 IPS e.max CAD LT for E4D BL3 I12605423 IPS e.max CAD LT for E4D BL4 I12605410 IPS e.max CAD LT for E4D A1 C14605411 IPS e.max CAD LT for E4D A2 C14605412 IPS e.max CAD LT for E4D A3 C14605413 IPS e.max CAD LT for E4D A3.5 C14605414 IPS e.max CAD LT for E4D B1 C14605415 IPS e.max CAD LT for E4D B2 C14605416 IPS e.max CAD LT for E4D B3 C14605417 IPS e.max CAD LT for E4D C2 C14605418 IPS e.max CAD LT for E4D D3 C14605425 IPS e.max CAD LT for E4D BL1 C14605426 IPS e.max CAD LT for E4D BL2 C14605427 IPS e.max CAD LT for E4D BL3 C14605428 IPS e.max CAD LT for E4D BL4 C14

Characterization

597374 Programat® CS Furnace (110V/50-60 Hz)

Programat® CS Accessories

598642 Programat Firing Tray Kit (for use with IPS Empress CAD)

598833 Automatic Temperature Checking Set (ATK2)

530665 Furnace Tongs

NA2259599 Vacuum Pump


22


S M


IPS Empress® Universal Characterization Materials

602469 IPS Empress® Universal Shades and Stains KitContents:1 - IPS Empress Universal Shade A11 - IPS Empress Universal Shade A2/A3/A3.51 - IPS Empress Universal Shade B11 - IPS Empress Universal Shade B2/B3/B41 - IPS Empress Universal Shade C1/C21 - IPS Empress Universal Shade D2/D31 - IPS Empress Universal Shade Incisal 11 - IPS Empress Universal Shade Incisal 21 - IPS Empress Universal Stain white1 - IPS Empress Universal Stain orange1 - IPS Empress Universal Stain mahogany1 - IPS Empress Universal Stain khaki1 - IPS Empress Universal Stain maroon1 - IPS Empress Universal Glaze1 - IPS Empress Universal Glaze and Stain Liquid1 - Tweezers1 - Brush

IPS Empress® Universal Shades Refills

562472 IPS Empress Universal Shade A1562473 IPS Empress Universal Shade A2/3/3.5562474 IPS Empress Universal Shade A4562475 IPS Empress Universal Shade B1562476 IPS Empress Universal Shade B2/B3/B4562477 IPS Empress Universal Shade C1/C2562478 IPS Empress Universal Shade C3/C4562479 IPS Empress Universal Shade D2/D3562480 IPS Empress Universal Shade D4602471 IPS Empress Universal Shade Incisal 1602472 IPS Empress Universal Shade Incisal 2

IPS Empress® Universal Stains Refills

562481 IPS Empress Universal Stains white562482 IPS Empress Universal Stains black562483 IPS Empress Universal Stains mahagony562484 IPS Empress Universal Stains khaki562485 IPS Empress Universal Stains orange562486 IPS Empress Universal Stains grey562487 IPS Empress Universal Stains vanilla562488 IPS Empress Universal Stains crackliner562489 IPS Empress Universal Stains olive562490 IPS Empress Universal Stains yellow562491 IPS Empress Universal Stains basic blue562492 IPS Empress Universal Stains basic yellow562493 IPS Empress Universal Stains basic red562494 IPS Empress Universal Stains maroon

562495 IPS Empress® Universal Glaze Paste

562496 IPS Empress® Universal Stain/Glaze Liquid

IPS® Natural Die Material

597078 IPS Natural Die Material Kit

IPS® Natural Die Material Refills

597080 IPS Natural Die Material ND1 597081 IPS Natural Die Material ND2 597082 IPS Natural Die Material ND3 597083 IPS Natural Die Material ND4 597084 IPS Natural Die Material ND5 597085 IPS Natural Die Material ND6 597086 IPS Natural Die Material ND7 597087 IPS Natural Die Material ND8 597088 IPS Natural Die Material ND9 597089 IPS Natural Die Material Separator597090 IPS Natural Die Material Shade Guide

IPS e.max® CAD Characterization Materials

IPS e.max® CAD Crystall Shades Refills

605348 IPS e.max CAD Crystall Shade 0605349 IPS e.max CAD Crystall Shade 1605350 IPS e.max CAD Crystall Shade 2605351 IPS e.max CAD Crystall Shade 3605352 IPS e.max CAD Crystall Shade 4605353 IPS e.max CAD Crystall Shade I1605354 IPS e.max CAD Crystall Shade I2

IPS e.max® CAD Crystall Stains Refills

605356 IPS e.max CAD Crystall Stain white605357 IPS e.max CAD Crystall Stain crème605358 IPS e.max CAD Crystall Stain sunset605359 IPS e.max CAD Crystall Stain copper605360 IPS e.max CAD Crystall Stain olive605361 IPS e.max CAD Crystall Stain khaki605362 IPS e.max CAD Crystall Stain mahogany

IPS e.max® CAD Characterization Accessories

605363 IPS e.max CAD Crystall Glaze Paste605364 IPS e.max CAD Crystall Glaze Spray605366 IPS e.max CAD Crystall Glaze Liquid605365 IPS e.max CAD Crystall Add-On605569 IPS e.max CAD Crystall Add-On Liquid605367 IPS e.max CAD Crystallization Tray605368 IPS e.max CAD Crystallization Pins605525 IPS Object Fix Flow605526 IPS Object Fix Putty

23


S M

Tetric® Color

557028 Tetric® Color Assortment1 – Tetric Color Shade White1 – Tetric Color Shade Light-Yellow1 – Tetric Color Shade Bluish-Gray1 – Tetric Color Shade Ochre1 – Tetric Color Shade Medium-Brown1 – Tetric Color Shade Dark-Brown1 – Tetric Color Shade Black1 – Vivapad40 – Applicator tips

Tetric® Color Refills

557020 White557021 Light-Yellow557022 Bluish-Gray557023 Ochre557024 Medium-Brown557025 Dark-Brown557026 Black

OptraFine®

601989 OptraFine Assortment

601987 OptraFine Promo Pack

OptraFine® Finishers Refills

601990 10 – Cup601992 10 – Disk601994 10 – Flame

OptraFine® Polishers Refills

601991 10 – Cup601993 10 – Disk601995 10 – Flame602288 10 – Nylon Brushes

602289 OptraFine Polishing Paste

Cementation

Multilink® Automix

System Packs

591405 Transparent591406 Yellow591407 White Opaque

Refills and Accessories

591408 Transparent Refill591409 Yellow Refill591410 White Opaque

592225 15 - Multilink Automix Tips

579225 Multilink Primer A&B Mixing Pad

576825 Multilink Primer A&B Refills1 Primer A Bottle, 1 Primer B Bottle

592435 50 - Multilink Applicator

576827 Multilink Metal/Zirconia Primer

532888 Monobond-S

Variolink® II

558524 Variolink II Esthetic Cementation Kit

558947 Variolink II Standard Pack

Variolink® II Refills

558949 Base Bleach XL-010558950 Base Transparent558951 Base White 100558954 Base Opaque 100 White558952 Base Universal 200 Yellow558953 Base Brown 340558955 Catalyst High Viscosity Yellow (thick)558956 Catalyst Low Viscosity Yellow (thin)558957 Catalyst High Viscosity Transparent (thick)558958 Catalyst Low Viscosity Transparent (thin)559224 20 – Variolink II Precision Applicator Tips

(1.2 mm diameter)


24


S M

Variolink® II Try-in Paste

558959 Variolink II Try-in Paste AssortmentContents:1 – Variolink II Try-in Bleach1 – Variolink II Try-in Transparent1 – Variolink II Try-in White/1001 – Variolink II Try-in Opaque/100/White1 – Variolink II Try-in Yellow/2001 – Variolink II Try-in Brown/340

558960 Bleach/XL-010 Refill548793 Transparent Refill548794 White/100548795 Opaque/100/White548796 Universal/200/Yellow548797 Brown/340

Variolink® Veneer

597614 Variolink® Veneer AssortmentContents:1 – Variolink Veneer High Value +31 – Variolink Veneer High Value +21 – Variolink Veneer High Value +11 – Variolink Veneer Medium Value 01 – Variolink Veneer Low Value -11 – Variolink Veneer Low Value -21 – Variolink Veneer Low Value -31 – Variolink Veneer Try-in Paste High Value +31 – Variolink Veneer Try-in Paste High Value +21 – Variolink Veneer Try-in Paste High Value +11 – Variolink Veneer Try-in Paste Medium Value 01 – Variolink Veneer Try-in Paste Low Value -11 – Variolink Veneer Try-in Paste Low Value -21 – Variolink Veneer Try-in Paste Low Value -31 – Monobond-S1 – Liquid Strip1 – Total Etch12 – ExciTE single dose

Variolink® Veneer Refills

591423 High Value +3591424 High Value +2591425 High Value +1591426 Medium Value 0591427 Low Value -1591428 Low Value -2591429 Low Value -3

Variolink® Veneer Try-in Paste Refills

591430 High Value +3591431 High Value +2591432 High Value +1591433 Medium Value 0591434 Low Value -1591435 Low Value -2591436 Low Value -3

Preparation & Bonding

531548 IPS Ceramic Etching Gel

ExciTE®

601929 ExciTE® VivaPen™ Intro PackContents:1 – VivaPen (2 ml) filled with ExciTE1 – Total Etch 80 – VivaPen Brush Cannulas

604310 VivaPen Brush Cannula Refills (100)

607252 VivaPen Sleeve Refills (500)

556607 ExciTE Refill

556609 ExciTE® Single Dose Intro PackContents:50 – single dose units1 – Total Etch 5 – finger clips for single dose units

556610 ExciTE® Single Dose RefillContents:50 – single dose units2 – fingerclips for single dose units

558402 ExciTE DSC Regular Size Single Dose Refills

559581 ExciTE DSC Small/Endo Size Single Dose Refills

Polymerization

598127 bluephase® 16i LED Curing Light607920 bluephase® G2 without radiometer607921 bluephase® G2 with radiometer607922 bluephase® G2 radiometer only

Recall & Care

Proxyt® Refills

579866 Fine579867 Medium579868 Coarse

25


S M

26

United States175 Pineview DriveAmherst, NY 14228716.691.0010800.533.6825 Fax: [email protected]

Canada2785 Skymark Avenue, Unit 1Mississauga, Ontario L4W 4Y3905.238.5700800.263.8182Fax: 905.238.5711 [email protected]

©2008 Ivoclar Vivadent, Inc. All products are trademarksof Ivoclar Vivadent, Inc. E4D is a registered trademark ofD4D Technologies, LLC.611438 Rev 2 1/2008

100% CUSTOMER SATISFACTION G U A R A N T E E D !

CADalog FINAL

Documents

Transcript of CADalog FINAL