CAD - Amazon Web Servicescerec-pdf.s3.amazonaws.com/603619 CADalog for CEREC.pdfand posterior...
Transcript of CAD - Amazon Web Servicescerec-pdf.s3.amazonaws.com/603619 CADalog for CEREC.pdfand posterior...
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y S M
C A D A L O GS M
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Diagnostic pg. 1
Preparation pg. 2
Capture pg. 4
Desensitization pg. 8
Milling pg. 9
Characterization pg. 11
Cementation pg. 15
Bonding Agents pg. 17
Polymerization pg. 18
Finishing pg. 18
Recall & Care pg. 19
Ordering Information pg. 20
T a b l e o f C o n t e n t s
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
The CRT Bacteria Caries Risk Test makes
bacteria visible. Micro-organisms, mutans
streptococci, and lactobacilli in particular
play a decisive role in the development of
caries. They can harm both healthy as well
as restored teeth.
Consequently, it is very important to gather
information about the existence of these
micro-organisms as early as possible and on
a regular basis.
The CRT Bacteria Caries Risk Test facilitates
the detection of mutans streptococci and
lactobacilli in saliva.
ADVANTAGES FOR CAD/CAM:
F Provides preventive plan to ensure
long term clinical success of the
final restoration
C R T ® B a c t e r i a C a r i e s R i s k T e s t
Di
ag
no
st
ic
1
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
OptraDam is a completely new type of rubber dam
that is used without separate frames and does not
require metal clamps.
The use of a flexible integrated frame allows for
three-dimensional movement and unsurpassed
patient comfort. The OptraDam uses non-
radiolucent materials allowing it to remain in place
while x-rays are being taken.
ADVANTAGES FOR CAD/CAM:
F Simple and quick isolation for
preparation and successful
cementation
F Integrated frame - no painful
metal clamps required
F Three-dimensional anatomical
design that ensures reduced
tension
Pr
ep
ar
at
io
n
O p t r a D a m ®
A n a t o m i c a l l y S h a p e d R u b b e r D a m
2
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
OptraGate is an auxiliary aid that enables the treatment field to be
enlarged easily, effectively and comfortably. OptraGate is comfortable
to wear over long periods of time, as it is three–dimensionally flexible.
The three-dimensional elasticity allows unimpeded jaw movements
during the entire procedure. OptraGate is entirely latex-free and is
available in three sizes: “Regular”, “Small” and “Junior.”
ADVANTAGES FOR CAD/CAM:
F Easy placement creates excellent access for image capture
F Three-dimensionally flexible
F Can be inserted and removed easily and quickly
O p t r a G a t e ®
Pr
ep
ar
at
io
n
L i p a n d C h e e k R e t r a c t o r
3
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Ca
pt
ur
e
4
The light-curing material simulates the shade of the
preparation. The clinician uses the IPS Natural Die
Material Shade Guide to determine the preparation
shade and provide the optimum basis on which the
shade of the original tooth can be reproduced
during the subsequent finishing of the restoration.
ADVANTAGES FOR CAD/CAM:
F Creates a functional “holder” for
the restoration
F Mimics the underlying tooth color
of the final restoration so the clinician
can optimize color and esthetics
I P S N a t u r a l D i e M a t e r i a l
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
The Odyssey diode lasers utilize the latest diode technology available in dentistry today.
With a wavelength of 810 nanometers, they have the highest affinity for soft tissue,
making them an invaluable tool for everyday soft tissue procedures. Unique fiber
management, aiming beam control, and simple intuitive key pad design make the Odyssey
lasers the most efficient, portable, and affordable soft tissue lasers in dentistry today.
Powering the Odyssey diode laser design is a passion for better dentistry made possible
through the use of the most sophisticated, precise and minimally invasive technology
available. The Odyssey diode laser cuts and coagulates at the same time, thereby
facilitating immediate hemostasis, less tissue charring, less postoperative healing time and
fewer postoperative complications, including less chance of infection.
ALL ODYSSEY MODELS FEATURE:
F High quality design, customer support and a one-year warranty.
F Laser wavelength of 810nm, which has the highest affinity for hemoglobin and
melanin with the benefit of being the least invasive and least traumatic instrument
to perform soft tissue procedures.
F Adjustable aiming beam to assist with the location and placement of the laser.
F Capability to perform a variety of procedures, including:
F Tissue Troughing to optimize optical impressions
F Hemostasis
F Gingivectomy
F Clinical Crown Lengthening
F Implant uncovering and tissue recontouring
Ca
pt
ur
e
O d y s s e y ® L a s e r s
5
Image with no laser troughing
Image after troughing with laser
Images provided by Dr. Alex Touchstone
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Ca
pt
ur
e
6
ADVANTAGES FOR CAD/CAM:
F Controls bleeding that can occur during preparation
F Troughs soft tissue around the preparation optimizing the optical image
F Maintains hemostasis and moisture control duringcementation
Odyssey 3Watt Soft TissueDiode Laser
The Odyssey lasers are available in three models designed to meet
every dental professional’s needs:
ODYSSEY NAVIGATOR
The Odyssey Navigator features technology that provides more
convenience, easier operation, more flexibility and unmatched portability.
F Touch screen monitor
• Intuitive design and navigation ability make program selection
and activation simple and easy.
• Inverted screen capability
• Allow for incredible flexibility by keeping the screen readable
in any orientation.
F Wireless foot pedal
• The first dental laser featuring wireless technology for portability,
flexibility and ease of use. Powered with a 9 volt lithium battery
that provides over 100 hours of continuous operation.
F Ergonomic hand piece design
• Unique arc design fits comfortably in your hand
F Uni-dose fiber tips
• No cleaving, no stripping of fiber – just snap on and
you’re ready to lase.
F Lithium ion battery
• 45 minutes of portable lasing
ODYSSEY 2.4GF 5 Watts of power
F Wireless Pedal
F Programmability for most utilized settings
F Offers one manual setting set as a default from the factory with
1.0W, full aiming beam in a continuous mode.
F Three user-defined programs. Each determines power, mode of
operation and aiming beam intensity of illumination.
ODYSSEY 3WATT
F 3 Watts of power ideal for most soft tissue applications
F Corded foot pedal
F Manual programming
O d y s s e y ® L a s e r s
Odyssey 2.4G Soft TissueDiode Laser
Odyssey Navigator
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Ca
pt
ur
e
7
I P S C o n t r a s t S p r a yP o w d e r
IPS Contrast Spray is a combination of titanium and
silicone dioxide used to balance out the different optical
properties of the natural tooth permitting accurate CEREC
impressions. The atomizing nozzle dispenses the optimum
amount of spray to generate a detailed representation of
the preparation. IPS Contrast Spray is available for both
intra–oral and extra–oral application.
INDICATIONS:
F Powdering all preparations prior to taking the optical
impression for CAD/CAM procedures
ADVANTAGES FOR CAD/CAM:
F 4 angled atomizing heads to ensure complete coverage
F Easy, fast application
F Provides excellent optical images
F Easy removal
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
De
se
ns
itiz
at
ion
S y s t e m p ® . d e s e n s i t i z e r
Systemp.desensitizer consists of 5% glutaraldehyde and 35%
polyethylene glycol dimethacrylate in an aqueous solution.
The combination penetrates dentin tubules and forms protein
plugs that seal the tubules and reduce hypersensitivity.
Systemp.desensitizer reduces post-op sensitivity during the
temporization phase and following placement of
the final restoration.
INDICATIONS:
F Provides comfort between preparation and placement
F Under temporary restorations
F Rewetting agent prior to cementation
CAD/CAM APPLICATION
Simply soak a cotton pellet with Systemp.desensitizer
and place in the preparation. Systemp.desensitizer calms
the preparation, occluding dentinal tubuli and providing
comfort while IPS Empress® CAD restorations are being
milled, polished or characterized.
ADVANTAGES FOR CAD/CAM:
F Provides patient comfort during time from preparation
to placement
8
Dentistry by Dr. Tom Teel
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
IPS EMPRESS CAD LEUCITE-REINFORCED GLASS CERAMIC BLOCK FOR CAD/CAM DENTISTRY
IPS Empress® CAD is the esthetic leucite-reinforced glass ceramic for the
efficient fabrication of single-unit restorations through CAD/CAM
technology. By optimizing the manufacturing processes, a new material
was created with more homogeneous leucite crystal distribution providing a
glass ceramic with an increased flexural strength of 160 MPa.
IPS EMPRESS CAD HT (HIGH TRANSLUCENCY)
Features a high degree of translucency, making the HT blocks ideally
suited for the fabrication of smaller restorations (e.g. inlays and onlays).
Restorations fabricated with the HT blocks demonstrate true-to-nature
chameleon effect and outstanding adaptation to the residual tooth
structure. The blocks simulate the life-like fluorescence in order to permit
optimum integration into the natural residual tooth structure.
IPS EMPRESS CAD LT (LOW TRANSLUCENCY)
Features a lower degree of translucency, making them ideal for most full
coverage restorations (e.g. full crowns, large partial coverage restorations,
and veneers). The LT blocks are less translucent, which makes them appear
higher in value, therefore resulting in a brighter restoration.
IPS EMPRESS CAD MULTI
With multiple translucencies and a balanced blend of chroma from gingival
to incisal, IPS Empress CAD Multi offers dental professionals a fusion of
color that provides the natural gradients to replicate dentin and enamel in
a single block.
With the proven high strength (160 MPa) of IPS Empress CAD leucite-
reinforced glass ceramic, the IPS Empress CAD Multi can be either polished
or glazed to obtain maximum functional and esthetic results. IPS Empress
CAD Multi is available in the most popular A-D shades. They are ideal for
the fabrication of full and partial coverage restorations as well as veneers.
ADVANTAGES FOR CAD/CAM:
F IPS Empress is the most trusted brand in all ceramics
due to its proven quality and outstanding esthetics
F Offers the most comprehensive range of shades and
sizes – over 100 combinations
F IPS Empress CAD Multi provides a true blend of
translucencies and chromas
F Fluorescence matches that of natural tooth structure
I P S E m p r e s s ® C A D
Mi
ll
in
g
9
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
IPS e.MAX
When Ivoclar Vivadent introduced IPS e.max, it provided dental
professionals with a highly esthetic, conventionally cementable
restoration with either a zirconia or high strength glass ceramic
substructure and a single overlay ceramic. Delivering the ultimate in
metal-free esthetics and strength, IPS e.max is the ideal choice when
conventional cementation is desired, for multiple units and for
combination cases.
IPS e.MAX CAD
As soon as you see it you will know it is unique. Blue in color, IPS e.max
CAD is delivered in a pre-crystallized form that is ideal for milling.
After milling, IPS e.max CAD is crystallized in a standard porcelain oven
where it undergoes a dramatic change and the final physical properties
are established. IPS e.max CAD is highly esthetic and offers 360 MPa
of strength.
IPS e.MAX ZIRCAD
For indications where the highest strength is required, including anterior
and posterior multiple unit bridges, IPS e.max ZirCAD is the ideal choice.
IPS e.max ZirCAD zirconium oxide frameworks can be processed efficiently
in a CAD/CAM system and deliver flexural strength of over 1000 MPa.
IPS e.MAX CERAM
IPS e.max Ceram is a nano-fluorapatite glass layering ceramic that is used
to overlay all IPS e.max materials and most zirconium oxide materials. This
single overlay ceramic makes IPS e.max the ideal choice for combination
cases as it allows for predictable shade results regardless of the substructure
material used. Its optimized optical properties deliver outstanding esthetics
and life-like vitality. IPS e.max Ceram is available in A-D and Chromascop
shades along with four new bleach shades.
Mi
ll
in
g
I P S e . m a x ®
10
IPS e.max ZirCAD blocks
IPS e.max CAD Precrystallized
IPS e.max CAD Crystallized
IPS e.max ZirCAD frameworks
IPS e.max CAD
F u r n a c e T e c h n o l o g y
Ch
ar
ac
te
riz
at
ion
11
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
PROGRAMAT® CS, P300, P500 AND P700
Featuring a small footprint, turbo opening system
and the innovative QTK (quartz tube kanthal)
heating technology. You’ll quickly see how these
reliable and easy–to–use furnaces are setting new
standards for productivity and efficiency. With the
P300 standard model, the well–equipped P500 and
fully–equipped P700 model, we now offer a
complete line of furnaces to meet your needs.
PROGRAMAT® CS
The Programat CS is the all–new chairside furnace
designed specifically for the clinician. From stain
and glaze to crystallization, the Programat CS is
fully–equipped to meet the needs of today’s
CAD/CAM office.
IPS UNITRAY
The honeycomb tray and pins allow proper air flow
around the restoration during the firing process,
optimizing the esthetics of the final restoration.
IPS OBJECT FIX
A convenient substitute for firing pins or for use
with veneer cases, IPS Object Fix allows the
restoration to be supported on the firing tray in a
foam gel that promotes proper air flow around the
restoration during the firing process.
SINTRAMAT®
The new Sintramat is a high-temperature furnace
for sintering IPS e.max®. The temperature control
pattern has been optimized for the IPS e.max
ZirCAD zirconium oxide ceramic. The Sintramat
offers large sintering capacity, capable of sintering
up to 75 single units or 25 bridge frameworks at
one time.
Programat P300
Programat P500
Sintramat
IPS Object FixIPS UniTray
Programat P700
Programat CSAVAILABLE MAY 2007AVAILABLE MAY 2007
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Ch
ar
ac
te
riz
at
ion
C h a r a c t e r i z i n gI P S E m p r e s s ® C A D R e s t o r a t i o n s
The goal with the IPS Empress CAD line is to
continue the tradition of excellence in esthetics
and function utilizing simple, predictable and
effective techniques. Following are four ways to
replicate natural chromas and translucencies:
INTERNAL CHARACTERIZATION
A basic internal characterization can be easily
achieved using Tetric Color by simply applying a
thin layer on the desired internal area and then
light-curing it. Tetric
Color is applied after
etching and silanating
the ceramic.
EXTERNAL CHARACTERIZATION
A more refined characterization can be obtained
when using IPS Empress Universal Shades and
Stains. Shade/Stain application can be combined
with Glazing in a one-step technique, then rapidly
fired using the
Programat® P300
or Programat®
P500.
CUT-BACK TECHNIQUE
The most sophisticated technique involves
layering porcelain over the milled and reduced
IPS Empress CAD restoration to obtain a range
of translucencies and colors. This can be achieved
using IPS Empress Esthetics Veneer Layering Materials.
This technique combines wash pastes, layering
porcelains and
glaze processed
in a porcelain
furnace.
IPS EMPRESS CAD MULTI BLOCK
The IPS Empress CAD Multi Block offers a
multiplicity of translucencies and a fusion of color
embedded in the block. The dental professional
can either simply
polish or glaze the
restoration.
Tetric Color
Tetric Color
IPS Empress CAD Multi Block
Shading/Staining Technique
Cut-back Technique
12
Dentistry by Dr. Doug Voiers
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
T e t r i c ® C o l o rTetric Color is a system of light-curing composite stains for
individualized characterizations. They are ideally suitable
for internal characterizations of IPS Empress CAD
restorations (e.g. veneers). After application of the stains,
they are polymerized with a curing light (i.e. bluephase®
family). No further ceramic firing cycles should be
conducted after the “internal characterization” with
Tetric Color. This technique is mainly used chairside.
INDICATIONS
F Internal characterization of IPS Empress CAD
restorations
F Individualized shade characterization of direct and
indirect composite restorations
F Masking of discoloration of the tooth structure
ADVANTAGES FOR CAD/CAM:
F Fast, easy application
F Creates permanent color modification with
no furnace firing
Ch
ar
ac
te
riz
at
ion
13
I n t e r n a l C h a r a c t e r i z a t i o n
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
IPS EMPRESS UNIVERSAL SHADES & STAINS
IPS Empress Universal Shades & Stains are ideal for
external staining and characterization of IPS Empress
restorations. The subsequent glaze firing is
conducted using IPS Empress Universal Glaze.
INDICATIONS
F Used to reproduce Chromascop and A-D shades
F Used with IPS Empress Esthetic and
IPS Empress CAD restorations
IPS EMPRESS ESTHETIC VENEER LAYERING MATERIAL
IPS Empress Esthetic Veneer Layering Materials are
reinforced layering materials for the “cut-back”
technique. In this technique, the fully anatomical
IPS Empress CAD restorations (veneers and anterior
crowns) are reduced and dentin mamelon structures
are created in the incisal third and are subsequently
completed using materials in the paste and powder
form. In this way, a life-like and esthetic incisal
third is designed.
The IPS Empress Esthetic Veneer Layering Materials
feature an incisal-like fluorescence and true-to-
nature opalescence. High stability and excellent
modelling properties enable detailed layering of
life-like incisal edges.
INDICATIONS
F Highly esthetic layering in the incisal third of
reduced IPS Empress (Esthetic and CAD) veneers
and anterior crowns
KITS AND REFILLS
The IPS Empress Veneer Kit contains the most
popular wash pastes and layering materials.
Not all shades are integrated in the kits but are
available as refills.
Ch
ar
ac
te
riz
at
ion
I P S E m p r e s s ® L a y e r i n g & C h a r a c t e r i z a t i o n
IPS Empress
Universal
Shades & Stains
IPS Empress Esthetic Veneer
Layering Materials
14
E x t e r n a l C h a r a c t e r i z a t i o n
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Ce
me
nt
at
io
n
MULTILINK AUTOMIX - UNIVERSAL ADHESIVE RESIN CEMENT
Multilink Automix is a universal, dual-curing, self-etching cement for the fast and
reliable adhesive luting of indirect restorations made of all types of material.
Multilink Automix may be applied directly to the restoration, making manual mixing
obsolete.
Multilink Automix is used in combination with self-etching and self-curing
Multilink Primer A/B. Acting as a primer for dentin, Multilink Primer A/B provides
good marginal adaptation and high bond strength.
ADVANTAGES FOR CAD/CAM
F Provides immediate high bond strength to all-ceramic
CAD/CAM restorations
F Self-etch system reduces the number of steps and eliminates post-op sensitivity
F Fast self-curing material with light-curing option
F Easy application, no equipment required
F Three shades: Yellow, Transparent, Opaque
VARIOLINK VENEER - ESTHETIC RESIN CEMENT
Variolink Veneer offers exceptionally easy clean up and is ideal when placing
multiple anterior all-ceramic restorations. The seven light-cure value shades
enhance the esthetics of the final restoration. The Medium Value (MV 0) is highly
translucent and has little effect on the final restoration. The High Value shades
allow the clinician to brighten or increase the value of the restoration and the
Low Value shades provide a "warming" effect to the final restoration.
Variolink Veneer is amine-free, providing a high degree of color stability
ensuring outstanding esthetics.
ADVANTAGES FOR CAD/CAM
F Provide highly esthetic resin cement with exceptionally easy set up for anterior
crowns and veneers
M u l t i l i n k ® & V a r i o l i n k ®
Multilink Automix
Variolink Veneer
15
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Ce
me
nt
at
io
n
VARIOLINK II - ESTHETIC RESIN CEMENT
The dual-curing luting composite Variolink II has been used for more than 15 years in
over 20 million restorations throughout the world. Numerous awards in the category
of adhesive luting composites and excellent results from clinical long-term studies are
testimony to its success.
ADVANTAGES FOR CAD/CAM
F Six shades, three degrees of translucencies, two consistencies
F Total etch technique
F High bond strength
F High radiopacity
F Light-cure only and dual-cure polymerization options
16
Variolink II
IPS CERAMIC ETCH
4% hyrdrofluoric acid is designed to etch the internal aspects of all-ceramic
IPS Empress CAD restorations, preparing the restoration for cementation. IPS Empress
and IPS Empress CAD restorations are etched for 60 seconds.
IPS Ceramic Etch
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
B o n d i n g A g e n t s
Excite DSC
Excite
Bo
nd
ing
Ag
en
ts
EXCITE® - SINGLE-COMPONENT ADHESIVE
Excite is an alcohol-based light-curing single-component bonding agent for enamel and
dentin bonding.
As Excite contains ethanol as the solvent, the adhesive is highly tolerant of different
working techniques and moisture conditions of dentin. Unlike acetone-based bonding
agents, Excite does not evaporate too quickly when the bottle is open.
The nanometric fillers ensure a visible glossy coat during the application of Excite.
This glossy coat enables the operator to check the coverage of the adhesive layer.
Because of their small size, the particles are able to penetrate into opened dentinal
tubules. A polymerized coat of Excite is less than eight micrometers thick.
Consequently, polymerization prior to the cementation of indirect restorations
does not compromise the accuracy of fit.
ADVANTAGES FOR CAD/CAM
F One step application
F Very low film thickness - does not affect fit
F High bond strength
EXCITE® DSC - DUAL-CURE SINGLE-COMPONENT ADHESIVE
Excite DSC is a dual-curing single-component adhesive. Excite DSC is suitable for use in
conjunction with dual and self-curing luting composites and restorative and core build-
up composites. Therefore, it can be used in situations where a curing light is ineffective.
ADVANTAGES FOR CAD/CAM
F Easy preparation - single-dose and single component
F Easy and quick - application in one layer, no light-curing required
F More convenient processing - no mixing, no light-curing, no interference
with the accuracy of fit of the restoration
F High economic efficiency - the single-dose form of application ensures hygiene
and fresh adhesive for each application
17
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Po
ly
me
ri
za
ti
on
&F
in
is
hi
ng
P o l y m e r i z a t i o n
bluephase 16i
BLUEPHASE® 16I - LED CURING LIGHT
The bluephase 16i is a cordless high-performance LED light for all clinical indications.
The light produces 1,600 mW/cm2 of light intensity offering a 5 second cure for most
dental materials. The bluephase 16i draws its power from a lithium-ion battery
providing 45 minutes of continuous use. It also offers the unique “Click and Cure”
function in the event the battery reaches the limits of its charge.
ADVANTAGES FOR CAD/CAM
F 1,600 mW/cm2 for fast curing
F Multiple output programs
F Cordless construction for ease of use
F ”Click and Cure” function
F Ergonomic design reduces fatigue
OPTRAFINE® CAD/CAM POLISHING SYSTEM
OptraFine is a diamond polishing system developed for dental ceramic/porcelain materials.
Comprised of rubberized polishers, nylon brushes and a ceramic polishing paste, the
system can be used intra-orally or extra-orally and is highly suited for CAD/CAM
restorations. The instruments are designed to be used in slow-speed handpieces at rotary
speeds of 10,000 - 15,000 rpm.
ADVANTAGES FOR CAD/CAM
F Quick and easy high-gloss polishing
of IPS Empress CAD and
IPS e.max restorations
F i n i s h i n g
OptraFine kit
18
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
R e c a l l & C a r e
Proxyt kit
PROXYT® PROFESSIONAL TOOTH CLEANING PASTE
Paste for professional tooth cleaning and polishing. Gentle removal of bacterial plaque.
The systematic professional cleaning and polishing of teeth and restoration surfaces is a basic
measure for preventing caries and periodontal disease. The Proxyt prophylaxis pastes clean
effectively, yet are gentle. The pastes do not wear the tooth structure unnecessarily or
roughen the surfaces of restorations.
ADVANTAGES FOR CAD/CAM
F Gentle on CAD/CAM ceramic restorations
F Three levels of abrasion: fine, medium, coarse
F Contains xylitol and fluoride
F No splattering
Re
ca
ll&
Ca
re
19
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Diagnostic
NA6556001 CRT System KitContents:
1 - CRT Bacteria Standard Package
1 - Cultura Incubator
10 - CRT Beakers
Literature Support
553543 CRT Bacteria Standard PackageContents:
6 - CRT Bacteria Dip Slides (SM & LB)
6 - Paraffin Pellets
6 - Disposable Pipettes
6 - NaHC03 Tablets
556007 CRT Beakers (10/pk)
538325 Cultura Incubator
Preparation
577272 OptraDam® AssortmentContents:40 - OptraDam Regular40 - OptraDam Small
OptraDam® RefillsContents:80 - OptraDam
593426 OptraDam® Regular
593427 OptraDam® Small
593425 OptraDam® Promo PackContents:4 - OptraDam Regular4 - OptraDam Small
598984 OptraDam® Risk-Free Assortment Contents:1 - OptraDam Assortment 1 - OptraDam Promo Pack(A total of 88 OptraDams)
577275 OptraGate® AssortmentContents:40 - OptraGate (Regular)
40 - OptraGate (Small)
OptraGate® RefillsContents:
80 - OptraGate disposable lip & cheek retractors
590850 Regular
590851 Small
591451 Junior
590852 OptraGate® Promo PackContents:
4 - OptraGate (Regular)
4 - OptraGate (Small)
598985 OptraGate® Risk Free AssortmentContents:
1 - OptraGate Assortment
1 - OptraGate Promo Pack
(A total of 92 OptraGates)
Capture
IPS Contrast Spray602712 IPS Contrast Spray - 50 ml - Intra-Oral
602713 IPS Contrast Spray - 200 ml - Extra-Oral
IPS Natural Die Material597078 IPS Natural Die Material Kit597080 IPS Natural Die Material 8 g ND1597081 IPS Natural Die Material 8 g ND2597082 IPS Natural Die Material 8 g ND3597083 IPS Natural Die Material 8 g ND4597084 IPS Natural Die Material 8 g ND5597085 IPS Natural Die Material 8 g ND6597086 IPS Natural Die Material 8 g ND7597087 IPS Natural Die Material 8 g ND8597088 IPS Natural Die Material 8 g ND9597089 IPS Natural Die Material Separator 20 ml597090 IPS Natural Die Material Shade Guide
O r d e r i n g I n f o r m a t i o n
20
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Odyssey® 2.4G Diode Laser5951216 Odyssey® 2.4G Diode Laser with Accessories
Odyssey® 3Watt Diode Laser603286 Odyssey® 3Watt Diode Laser with Accessories
Odyssey® Navigator 603302 Odyssey® 3Watt Diode Laser with Accessories
Desensitization
559596 Systemp®.desensitizer Refill BottleContents:
1 - Bottle, 5 g
561386 Systemp®.desensitizer Single Dose RefillContents:
50 - Single dose vessels, 0.1 g each
Milling
IPS e.max® for inLab591386AL IPS e.max® CAD for inLab Basic Kit MO
C14/5 pieces596797 IPS e.max CAD for inLab MO 0 C14/5 pieces
596798 IPS e.max CAD for inLab MO 1 C14/5 pieces
596799 IPS e.max CAD for inLab MO 2 C14/5 pieces
596800 IPS e.max CAD for inLab MO 3 C14/5 pieces
596801 IPS e.max CAD for inLab MO 4 C14/5 pieces
IPS e.max® ZirCAD for inLab591387AL IPS e.max ZirCAD for inLab Basic Kit
596825 IPS e.max ZirCAD for inLab C15/5 pieces
602438 IPS e.max ZirCAD for inLab C15/25 pieces
602439 IPS e.max ZirCAD for inLab C15L/5 pieces
602440 IPS e.max ZirCAD for inLab C15L/25 pieces
596826 IPS e.max ZirCAD for inLab B40/3 pieces
602441 IPS e.max ZirCAD for inLab B40/9 pieces
602442 IPS e.max ZirCAD for inLab LB40L/3 pieces
602443 IPS e.max ZirCAD for inLab B40L/9 pieces
IPS Empress® CAD for CEREC602475 IPS Empress CAD for CEREC - Basic Starter Kit A-D
602479 IPS Empress CAD for CEREC - Basic Trial Kit A-D
602477 IPS Empress CAD for inLab - Basic Starter Kit A-D
IPS Empress® CAD Block RefillsVarious IPS Empress CAD A-D Blocks and
Bleach Blocks - 5 per refill
IPS Empress CAD Chromascop Blocks -
5 per refill
IPS Empress CAD Multi sizes I12 and C14 -
5 per refill
IPS Empress CAD Multi sizes C14L - 5 per refill
IPS Empress® Universal Shades, Stains, and Glazes602469 IPS Empress Universal Shades and Stains A-D Kit
602468 IPS Empress Universal Shades and Stains
Chromascop Kit
Various IPS Empress Universal Shade Refill 3 g -
(A-D and Chromascop)
Various IPS Empress Universal Stain Refill 3 g -
(A-D and Chromascop)
562495 IPS Empress Universal Glaze Paste Refill
562496 IPS Empress Universal Stain and Glaze Liquid
IPS Empress® Esthetic Veneer Layering MaterialsVarious IPS Empress Esthetic Wash Pastes
Various IPS Empress Esthetic Veneer Layering Materials
602467 IPS Empress Veneer Starter Kit
Diamond Polishing PasteNA2259057 Diamond Polishing Wheels - 12 each (Rubber)
NA2259059 Diamond Polishing Wheels - 12 each (Felt)
NA2259055 Diamond Polishing Paste - 2 g
Sintramat597748 Sintramat 240/50-60 Hz
O r d e r i n g I n f o r m a t i o n
21
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
596515 Sintering Sagger
596514 ZrO2 Beads - 100 g
Programat® Furnaces597374EU Programat CS (110V/50-60 Hz)
596049EU Programat P300 (110V/50-60 Hz)
596050EU Programat P500 (110V/50-60 Hz)
597372EU Programat P700 (110V/50-60 Hz)
544903 Calibration Set II (featuring silver wires)
545634 Silver wires only (5/package)
530669 Firing stand G (large with removable pegs)
530670 Firing stand K (small for single unit)
530671 Supporting pins
543856 Firing muffle
530665 Tongs
NA2259599 Vacuum pump
IPS Object Fix597077 IPS Object Fix - 12 g
Tetric® Color557028 Tetric Color Assortment
7 - Syringes - 1 g each, one in each shade
(White, Light-Yellow, Bluish-Gray, Ochre, Medium-Brown,
Dark-Brown, Black).
1 - Vivapad
40 - Applicator tips
Tetric Color Refill1 - Syringe - 1 g
5 - Applicator tips
557020 White
557021 Light-Yellow
557022 Bluish-Gray
557023 Ochre
557024 Medium-Brown
557025 Dark-Brown
557026 Black
Cementation
Multilink® Automix System Pack591405 Transparent
591406 Yellow
591407 White Opaque
Multilink® Automix Refill1 - Multilink Automix Dual Syringe - 9 g
591408 Transparent
591409 Yellow
591410 White Opaque
592225 Multilink Automix Tips Refill
15 - Tips per pack
579225 Multilink Primer A&B Mixing Pad
1 - Mixing Pad
576825 Multilink Primer A&B Refill
2 - Bottles - 3 g
592435 Multilink Applicator Refill
50 - Brushes
576827 Multilink Metal/Zirconia Primer
1 - Primer Bottle
558524 Variolink II Esthetic Cementation System Kit
558947 Variolink II Standard Pack
597614 Variolink® Veneer Assortment7 – Syringes - 1.5 ml each, Variolink Veneer
(1 each in colors: HV+3, HV+2, HV+1, MV0, LV-1,
LV-2, LV-3)
7 – Syringes - 1.5 ml each, Variolink Veneer Try-in
(1 each in colors: HV+3, HV+2, HV+1, MV0, LV-1,
LV-2, LV-3)
1 – Bottle - 5 g Monobond-S
1 – Syringe - 2.5 g Liquid Strip
1 – Syringe - 2 g Total Etch
12 – Excite single-dose vessels - 0.1 g each
Various accessories
O r d e r i n g I n f o r m a t i o n
22
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
O r d e r i n g I n f o r m a t i o n
Variolink® Veneer Refills1 – Syringe - 1.5 ml each, Variolink Veneer
591423 High Value +3
591424 High Value +2
591425 High Value +1
591426 Medium Value 0
591427 Low Value -1
591428 Low Value -2
591429 Low Value -3
Variolink® Veneer Try-in Paste Refills1 – Syringe - 1.5 ml each, Variolink Veneer Try-in Paste
591430 High Value +3
591431 High Value +2
591432 High Value +1
591433 Medium Value 0
591434 Low Value -1
591435 Low Value -2
591436 Low Value -3
Variolink® II Refills1 – Syringe - 2.5 g Variolink II Base or Catalyst
558949 Base Bleach/XL-010
558950 Base Transparent
558951 Base White/100
558954 Base Opaque/100/White
558952 Base Universal/200/Yellow
558953 Base Brown/340
558955 Catalyst High Viscosity (thick) (Yellow)
558956 Catalyst Low Viscosity (thin) (Yellow)
558957 Catalyst High Viscosity Transparent (thick)
558958 Catalyst Low Viscosity Transparent (thin)
559224 Variolink II Precision Applicator Tips
20 - 1.2 mm diameter metal tips
558959 Variolink II Try-In Paste Assortment
1 - Syringe - 2.5 g Variolink II Try-in Bleach/XL-010
1 - Syringe - 2.5 g Variolink II Try-in Transparent
1 - Syringe - 2.5 g Variolink II Try-in
Opaque/100/White
1 - Syringe - 2.5 g Variolink II Try-in White/100
1 - Syringe - 2.5 g Variolink II Try-in
Universal/200/Yellow
1 - Syringe - 2.5 g Variolink II Try-in Brown/300
Variolink II Try-In Paste Refills
1 - Syringe - 2.5 g Variolink II Try-In
558960 Bleach/XL-010
548793 Transparent
548794 White/100
548795 Opaque/100/White
548796 Universal/200/Yellow
548797 Brown/340
IPS Ceramic Etch1 – 5 ml bottle, 4% Hydrofluoric Acid Gel
531548 IPS Ceramic Etch Gel
23
I v o c l a r V i v a d e n t , I n c .P a r t n e r i n g i n E s t h e t i c D i g i t a l D e n t i s t r y SMC A D A L O G
S M
Bonding Agents
Excite®
556606 Excite Intro Pack - Bottle
556607 Excite Refill - Bottle
Contents:
2 - Bottles - 5 g each, Excite adhesive
556609 Excite Single Dose Intro Pack
50 - single dose units - 0.1 g each, pre-mounted with
Vivadent Applicators
1 - Syringe - 2 g Total Etch including application tips
5 - finger clips for single dose units
556610 Excite Single Dose Refill
50 - single dose units - 0.1 g pre-mounted
with Vivadent Applicators
2 - fingerclips for single dose units
558542 Excite DSC Single Dose Intro Pack
558402 Excite DSC Regular Size Single Dose Refills
559581 Excite DSC Small / Endo Size Single Dose Refills
Polymerization
598127 bluephase® 16i LED Curing Light
Finishing
OptraFine®
601989AN OptraFine Assortment
601990AN OptraFine F Refills - cup - 10 / pkg
601992AN OptraFine F Refills - disc - 10/ pkg
601994AN OptraFine F Refills - flame - 10 / pkg
601991AN OptraFine P Refills - cup - 10 / pkg
601993AN OptraFine P Refills - disc - 10 / pkg
601995AN OptraFine P Refills - flame - 10 / pkg
602288AN OptraFine® HP Brush Refill
10 - OptraFine HP (high polishers) - nylon brushes
602289AN OptraFine® HP Polishing Paste Refill
1 - OptraFine HP polishing paste - 1 ml
601987AN OptraFine® Promo Pack
Recall & Care
Proxyt®
549773 Proxyt Assortment
579866 Proxyt Refills - Fine
579867 Proxyt Refills - Medium
579868 Proxyt Refills - Coarse
O r d e r i n g I n f o r m a t i o n
24
100% CUSTOMER SATISFACTION G U A R A N T E E D !
UNITED STATES175 Pineview DriveAmherst, NY 14228716.691.0010800.533.6825 716.691.2285 [email protected]
CANADA2785 Skymark Avenue, Unit 1Mississauga, Ontario L4W 4Y3905.238.5700800.263.8182905.238.5711 [email protected]
©2007 Ivoclar Vivadent, Inc. All products are trademarks of Ivoclar Vivadent, Inc. CEREC and InLab are registered trademarks of Sirona Dental Systems GMBH.603619 Rev 0 1/2007