PUBLIC AUCTION

870 Routzong Rd.Xenia, OH 45385

Pre-Sort First ClassU.S. POSTAGE

P A I DDayton, Ohio

Permit No. 375

EXECUTIVE MOLD CORPORATION7601 Center Point 70 Blvd. • Huber Heights (Dayton), Ohio

TUE., JAN. 13, 2009 • 10:00 A.M.

TUESDAY, JANUARY 13, 2009 • 10:00 A.M.Inspection: Monday, January 12 • 10:00 a.m. - 4:00 p.m.

EXECUTIVE MOLD CORPORATION7601 Center Point 70 Blvd. • Huber Heights (Dayton), Ohio

TUESDAY, JANUARY 13, 2009 • 10:00 A.M.Inspection: Monday, January 12, 10:00 a.m. - 4:00 p.m.

EXECUTIVE MOLD CORPORATION7601 Center Point 70 Blvd. • Huber Heights (Dayton), OH

Steve Thompson, Auctioneer • 937-426-8446 www.thompsonauctioneers.com • Ohio License #63199566109

DIRECTIONS: From I-70 in Northeast Dayton area, Take Exit 41 (Westbound I-70) or Exit 41B (Eastbound I-70), State Route 235 North/New Carlisle. Go North on Route 235, 2/10 Mile to Center Point 70 Boulevard. Turn Left (West) onto Center Point 70 Boulevard, go 1 2/10 Mile to Auction Site, Right Hand Side, 7601 Center Point 70 Boulevard. Watch for Signs!

PUBLIC AUCTION

Steve Thompson, Auctioneer • 937-426-8446 www.thompsonauctioneers.com • Ohio License #63199566109

PUBLIC AUCTION PUBLIC AUCTIONPUBLIC AUCTION

PUBLIC AUCTION

Milacron/Fanuc Model Roboshot 110i Plastic Molder, Electric, New 2001

Charmilles Roboform 20A CNC Sinker EDM with C-Axis, New 1997

FEATURING:OKK Model DGM-400 CNC Graphite VMC, 2001 • Haas VF-3

Okuma MC-3VA • Charmilles Roboform 40 CNC EDM • Charmilles Roboform 20A CNC EDMOkamoto 12-24DX Surface Grinder • Cincinnati/Fanuc Roboshot 110i CNC Plastic Molder, 2001

Toolroom • Mills • Lathe • Grinders • Molding Machines • Forklift • Deltronics Comparator • Ford Stake Bed TruckLarge Quantity Tooling and Inspection Items

Can’t attend this auction? Now you can bid from anywhere!

Thinking of an Auction? Need an Appraisal? Know of a Plant Closure? Call Steve Thompson or Bryan Harvey • 937-426-8446 • www.thompsonauctioneers.com

OKK DGM-400 CNC Hi Speed Graphite Vertical Machining Center, New 2001

Okuma Model MC3-VA Vertical Machining Center

FEATURING: OKK Model DGM-400 CNC Graphite VMC, 2001 • Haas VF-3

Okuma MC-3VA • Charmilles Roboform 40 CNC EDMCharmilles Roboform 20A CNC EDMOkamoto 12-24DX Surface Grinder

Cincinnati/Fanuc Roboshot 110i CNC Plastic Molder, 2001Toolroom • Mills • Lathe • Grinders • Molding MachinesForklift • Deltronics Comparator • Ford Stake Bed Truck

Large Quantity Tooling and Inspection Items

Charmilles Roboform 40 CNC Sinker EDM

with C-Axis, New 1995

BUSINESS CLOSED • EXCELLENT CONDITION MOLD AND TOOL & DIE FACILITY BUSINESS CLOSED • EXCELLENT CONDITION MOLD AND TOOL & DIE FACILITY

EXCELLENT CONDITION MOLD AND TOOL & DIE

FACILITY!

Bid from anywhere! Go to www.bidspotter.com to bid on this auction!

REAL ESTATE AUCTION

Yale 5,000 Lb. Capacity Fork Lift1993 Ford Stake Bed Truck

INDUSTRIALREAL ESTATE TO

SELL AT 2:00, JAN. 13, 2009

EXCELLENT CONDITION MOLD AND TOOL & DIE

FACILITY!

Okamoto Model 12-24DX 3-Axis Surface Grinder

Tuesday, January 13, 2009 • 2:00 p.m.

This late model industrial building consists of 12,300 square feet. 10,000 Sq. ft. of modern tool & die shop area and 2,300 sq. ft. of modern office area. The building is white block and is situated on 5 acres of land with frontage on two roads. The property is in an industrial park with easy access to I-70. Property sells subject to confirmation of owner. Call Steve Thompson for more information and a walk-thru.

7601 Center Point 70 Blvd. • Huber Heights, Ohio

FOR MORE INFORMATION, CONTACT:Steve Thompson, Auctioneer • Ohio Real Estate Auctions

(937) 426-8446 • Cell (937) 609-6177

INDUSTRIALREAL ESTATE TO

SELL AT 2:00, JAN. 13, 2009

INDUSTRIALREAL ESTATE TO

SELL AT 2:00, JAN. 13, 2009

CNC VERTICAL GRAPHITE MACHINING CENTER• OKK Model DGM-400 CNC Vertical Graphite High Speed Machining Center,

S/N MA59019, New 2001, Neomatic 635 CNC Control, 200 M Internal Hard Drive, Ethernet, Look Ahead High Speed Programming, 30,000 RPM Spindle, 30 Taper, 16 Position Tool Changer, 30.33” X 17.73” Table, 22.06” X Axis Travel, 16.15” Y Axis Travel, 16.15” Z Axis Travel, Spindle Chiller, 1,417 IPM Rapids X and Y Axis, 944 IPM Rapid Z Axis, Rigid Tapping, Remote Operator Hand Held Pulse Control, Cycle Hours as of 12-1-2008, 5,200 approx. hours.

CNC VERTICAL MACHINING CENTER• Haas Model VF-3 CNC Vertical Machining Center, s/n 2175, New 1993,

Haas CNC Control, 7,500 RPM, 15 HP, 40 Taper, 20 Position Tool Changer, 48” X 18” Table, 40” X Axis Travel, 20” Y Axis Travel, 25” Z Axis Travel, Rigid Tapping

• Okuma Model MC-3VA CNC Vertical Machining Center, s/n 0087, Okuma OSP-500M-G CNC Control, with Graphics, 6,000 RPM, 10 HP, 40 Taper, 16 Position Tool Changer, 35” X 24” Table, 20.08” X Axis Travel, 12.99” Y Axis Travel, 15.75” Z Axis Travel

CNC SINKER EDM MACHINES• Charmilles Model Roboform 40 4-Axis CNC Sinker EDM Machine,

s/n 5-5295, New 1995, Charmilles CNC Control, Fully Programmable C Axis, 24 Position 3R Electrode/Tool Changer, 128 Amp, 19.68” X 15.74” X 17.71” Travels, Max. C Axis Rotation 100 RPM, 3R Spindle, Advantage Chiller, Fire Suppression System

• Charmilles Model Roboform 20A 4-Axis CNC Sinker EDM Machine, s/n 220069, New 1997, Charmilles CNC Control, Fully Programmable C Axis, 32 Position 3R Electrode/Tool Changer, 64 Amp, 11.8” X 9.8” X 9.8” Travels, Maximum C Axis Rotation 100 RPM, 3R “Combi” Spindle, Remcor Chiller, Fike Fire Suppression System CNC ELECTRIC DRIVE PLASTIC INJECTION MOLDING MACHINE

• Milacron/Fanuc Roboshot 110i Plastic Injection Molding Machine, s/n A011S0055, New 2001, All Electric Drive, Fanuc Series 180is-IA CNC Control, 110 Ton, 4.87 Ounce, 24” X 24” Platens, 16.1” X 16.1” Between Tie Bars, 13.78” Clamp Stroke, 31.8” Max. Daylight, 3.94” Ejector Stroke, Equipped with Yushin Model HOPIII-M550X Pick and Place Robot with Operator Hand Pulse Control

RECIPROCATING SCREW PLASTIC INJECTION MOLDING MACHINES• TMC Model 150 Reciprocating Screw Plastic Injection Molding Machine,

s/n 8901008, New 1989, 165 US Tons, 10 Ounce, 26.38” X 26.38” Platens, 17.72” X 17.72” Between Tie Bars, 14.96” Clamp Stroke, 34.65” Max Day-light, 3.94” Ejector Stroke, PLC Controls, Novatec MDM Hopper, 100 Lb. Capacity, Novatec MCD-2001 Dryer

• Toshiba Model IS-S85 Reciprocating Screw Plastic Injection Molding Machine, s/n 722W01-2, 85 Ton, 18” X 18” Platens, with Plastic Process Equipment Hopper, 3.5 Ounce

SURFACE GRINDERS• MHT Model 205MH Hand Feed Surface Grinder, s/n 89052845, 6” X 18”,

Walker Ceramax Permanent Magnetic Chuck• Harig Super 612 Hand Feed Surface Grinder, s/n 9090, 6” X 12” Walker

Ceramax Permanent Magnetic Chuck• Harig Super 612 Hand Feed Surface Grinder, s/n 20823 6” X 12” Walker

Ceramax Permanent Magnetic Chuck• Harig 612 Hand Feed Surface Grinder, s/n 16838, 6” X 12” Walker Ceramax

Permanent Mag. Chuck • Reid Model 618H Hand Feed Surface Grinder, s/n 20797R,

6” X 18” Permanent Mag. Chuck RADIAL DRILL PRESS

• Ikeda Model RMS-9 Radial Arm Drill Press, s/n 78021, New 1978, 3’ X 9”, Box Table, Power Clamping, Power Elevation

TOOLROOM EDM MACHINES• Excello Model 251 EDM, S/N 2510387, 25 Amp Solid State Power Supply,

6” X 12” X 8” Travels, 8” X 16” Table Platen, 16” X 26” X 10” Deep Tank, Quick Fill Tank, 3R Head

• Excello Model 251 EDM, S/N 2510599, 25 Amp Solid State Power Supply, 6” X 12” X 8” Travels, 8” X 16” Table Platen, 16” X 26” X 10” Deep Tank, Quick Fill Tank, 3R Head, Mitutoyo DRO

TOOLROOM LATHE• Logan 12” X 20” Lathe, s/n 71854, 6” 3-Jaw Chuck

VERTICAL MILLS• Alliant 2 HP Variable Speed Vert. Mill, s/n 74116614, 9” X 42” Table,

Accurite DRO• Bridgeport 1 HP, Step Pulley Vertical Mill, s/n 12BR183674, Mitutoyo DRO• Bridgeport 1 HP, Step Pulley Vertical Mill, s/n 12BR64081• Bridgeport 1 HP, Step Pulley Vertical Mill, s/n 12BR138650 • Bridgeport 1 HP, Step Pulley Vertical Mill, s/n J-144512

PLASTIC INJECTION MOLDING ACCESS. & SUPPORT MACHINERY• DME Model MF7G, 7-Zone Mold Heater, s/n 11651• Continental Model 12 Temperature Controller, s/n 79114, Water Based• Temptek Model A-5 Portable Chiller, s/n 4-4-5818, New 1994, 100 PSI, 20-60

Degree• Continental Model 20-1 Combination Dryer/Hopper, s/n 78-560, with

Conair Vacuum Loader • Novatec Model N-15 Dryer/Hopper, Model N-15, 60 Lb. Capacity

Haas Model VF-3 Vertical Machining CenterTMC 150 Ton Plastic Injection Molding Machine

Alliant Variable Speed Vertical Mill

Novatec Dryer/Hopper Torit SDF-6 Cartridge Type Dust Collector with Checkboard Control

Deltronic DH14-MPC Optical Comparator

PLASTIC INJECTION MOLDING ACCESS. & SUPPORT MACHINERY• Rapid Model 614-SR Regrinder/Granulator, s/n 310.1106, New 2000,

6” X 14” Opening, 3 HP• Rapid Model 912-C Regrinder/Granulator, s/n 30.5505, New 1994,

9” X 12” Opening, 5 HP• Rapid Model GKT 58-K Regrinder/Granulator, New ‘79, 5” X 8” Opening• (3) M.A.C. 12” Wide, Ribbed Plastic Injection Mold Parts Conveyors,

Elevated Discharge.FORK LIFTS

• Yale Model G51C-040-NFD Fork Lift, s/n P-153624, 5,000 Lb. Capacity, LP, Hard Tire, Cage, 2-Stage Mast, 42” Forks

• Rol-Lift 1,500 Lb. Walk Behind Elec. Platform Lift, s/n 890, Built In ChargerAIR COMPRESSORS AND DRYER

• Ingersol Rand Model T30 2-Stage Air Compressor, 10 HP, Recently New Compressor Head

• Airmax/Dresser Model DA-5 Tank Type Air Compressor, 5 HP, s/n 4110X20800

• Speedaire Model 5Z657E Refrigerated Air Dryer, s/n 2452921-021• Speedaire Model 5Z657E Refrigerated Air Dryer (Needs Work)

OPTICAL COMPARATOR• Deltronic Model DH14-MPC “Image Master” Optical Comparator,

s/n A5806634, 14”, MPC-5 Processor/DRO, Surface Illumination TORIT CARTRIDGE TYPE DUST COLLECTOR

• Torit Model SDF-6 Cartridge Dust Collector, 7.5 HP, 6 Filter, Torit Checker Board PLC Control, s/n IG517744-001

WELDER• Miller Model 330/BP Gas Tungsten Arc/Tig Welder, s/n HK243896, 330 Amp

MISCELLANEOUS MACHINERY• Kuhlmann Single Lip Cutter Grinder, Collets, Stand• Torit Model 84 Dust Collector, s/n K3801• Wells Model 8 Horizontal Band Saw, s/n 21517

3R EDM TOOLING• Large qty. of 3R EDM Tooling, including Electrode Holders, Collet

Chucks, Mandrels, Collets, Adaptor Plates, Hardware, Bushings, Control Rods, Clamp Kits, Manual Chuck Adaptors, Mini-Blocks, Manual Chucks, Tooling Blocks, Drawer Bars, etc.

STAKE BED TRUCK• Ford F-Super Duty Stake Bed Truck, New 1993, Diesel, 392,000 Miles,

8’ X 9’ Bed, 5-Speed, Single Axle with Dual Wheels, Aluminum Tool BoxesMACHINE TOOLING AND ACCESSORIES=

• Kurt Vises, End Mills, Drills, Reamers, Taps, Dies, Clamp Sets, Rotary Tables, Numerous Suburban Sine Plates, Magna-Sines, Nikken 30 Taper Holders, Cat 40 Holders, Suburban Rotary Indexer, Dressers, 5C Collets, R8 Collets, Motorized Spin Fixtures, TG100 Collets, Jacobs Chucks, Cen-ters, Large Quantity 3R EDM Tooling, 5C Indexers, Pin Gages, Jo Blocks, Calipers, Micrometers, Height Gages, Surface Plates, V-Blocks, Carbide Inserts, Saw Blades, Abrasives, Grinding Wheels, Ejector Pins, Misc. Plastic Molding Tooling, Many other Items

MISCELLANEOUS SHOP ITEMS• Shop Furnishings, Pallet Racking, Die Racking, Toolmaker’s Benches,

Ladders, Fans, Drum Racks, Pumps, Hardware, Hand Tools, Power Tools, Air Tools, Tool Cabinets, Huot Drill Cabinets, 40 Taper Tool Carts, Flex-ible Shaft Grinders, Building and Machine Maintenance Items, Straps, Chains, Binders, etc.

OFFICE FURNITURE AND EQUIPMENT• Excellent Condition Office Furniture Package, including Desks, Chairs,

Conference Table and Chairs, Wrap-Around Desk, Dell Computers, Tables, Drafting Tables, File Cabinets, HP Plotter, Toshiba DK16 Strata Phone System (8 Hand Sets), Print Files, File Cabinets, etc.

Bridgeport Mills (4 Available)

Ikeda 3’ X 9” Radial Arm Drill

OKK DGM-400 CNC Hi Speed Graphite Vertical Machining Center, New 2001

MHT 6” X 18” Surface Grinder

TERMSEverything is being sold on an “As is, where is, in place basis” with no warranties or guarantees of any kind. It is the buyer’s responsibility to inspect before bidding. Everything must be paid for in full on day of auction with cash, check with proper ID, Visa, MC or Discover. A 10% buyer’s Premium is in effect for those who attend the auction using Cash or Check. A 12.5% Buyer’s Premium is in effect for those onsite who use credit cards. A 15% buyer’s premium is in effect for those using our “Bid-Spotter” On-line bidding service. Removal of purchases is the buyer’s responsibility, expense and risk.

BID-SPOTTER TERMSIf you are bidding on the internet thru www.bidspotter.com, the terms are as follows: A 15% Buyer’s Premium is in effect. Internet bidders must register with a credit card. If you are the successful bidder your credit card will be charged as follows: For amounts less than $5,000, the entire balance is due immediately with your credit card. For amounts greater than $5,000, a 25% deposit will be due immediately and the remaining balance is due within 48 hours either by cash, check, Visa, MC or Discover, or wire transfer.IF YOU CANNOT ATTEND: Bid Live, Online at www.bidspotter.com or Fax to our office the items you want to bid on with you want to bid on with your max price and we will bid on your behalf. Please include a credit card number for downpayment in the event you are the successful bidder. Fax #: (937)376-8328

3R Tooling (Partial View)3R Tooling (Partial View)3R Tooling (Partial View)

Cat 40 Tooling (Partial View)

PUBLIC AUCTION!EXECUTIVE MOLD

CORPORATION

TUESDAY,JANUARY 13, 2009

10:00 A.M.

Excello 251 Toolroom EDM (1 of 2)