Product Information

Bulletin 193 Input Interface Module(Cat 193-EIMD; 193-EIMD60)

Additional Resources:1) Go to http://www.rockwellautomation.com/literature; 2) Go to Search, select Publication Number. Type in: 41053-157-01 or 193-UM002

Installation

0.55 Nm

5 lb-in

ATTENTION: Do not install, configure, operate or maintain this product until you have read the product documentation and the documents in the Additional Resources section for installing, configuring, operating or maintaining

equipment. To get the product documentation go to http://www.rockwellautomation.com/literature or contact your local sales office or Rockwell Automation representative.

ATTENTION: Ne pas installer, configurer, exploiter ou maintenir ce produit tant que vous n’avez pas lu sa documentation et les documents de la rubrique Documents connexes pour l’installation, la configuration, l’exploitation et la

maintenance de l’équipement. Pour obtenir de la documentation, rendez-vous sur le site http://www.rockwellautomation.com/literature ou contactez votre agence commerciale Rockwell Automation locale ou son représentant.

ACHTUNG: Für die Installation, Konfiguration, den Betrieb und die Wartung dieses Produkt lesen Sie sich bitte zunächst die Produktdokumentation sowie die Dokumente im Abschnitt „Weitere Informationen“ durch. Die

entsprechende Produktdokumentation finden Sie unter http://www.rockwellautomation.com/literature oder kontaktieren Sie Ihr lokales Vertriebsbüro bzw. einen Rockwell Automation-Mitarbeiter.

ATENCIÓN: No instale, configure, opere ni mantenga este producto hasta que haya leído la documentación del producto y los documentos en la sección Recursos adicionales para la instalación, configuración, operación o

mantenimiento de equipo. Para conseguir la documentación, diríjase a http://www.rockwellautomation.com/literature o póngase en contacto con su oficina regional de ventas o representante de Rockwell Automation.

ATENÇÃO: Não instale, configure, opere ou mantenha este produto até que você leia a documentação do produto e os documentos na seção Recursos adicionais para a instalação, configuração, operação ou manutenção do

equipamento. Para conseguir a documentação, visite http://www.rockwellautomation.com/literature ou entre em contato con seu escritório de vendas regional ou representante da Rockwell Automation.

ATTENZIONE: Non installare, configurare, attivare o riparare questo prodotto senza avere prima letto la relativa documentazione nonchè i documenti indicati nella sezione Ulteriori Risore riguardanti l’installazione, la configurazione,

l’attivazione o la riparazione dell’apparecchiatura. Per la documentazione sul prodotto visitare il sito http://www.rockwellautomation.com/literature o contattare l’ufficio vendite o il rappresentate Rockwell Automation di zona.

WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.

The 193-EIMD60 module is designed for applications in 120VAC 60 Hz control circuits only.

Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or

damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.

x 7x 7

1

2

3

Terminal

Designation

Funtional only with the E3 Plus Overload Relay

Reference

1 IN 1 General-purpose AC input number 1

Description

2 IN 2 General-purpose AC input number 23 IN 3 General-purpose AC input number 34 IN 4 General-purpose AC input number 45 AC COM AC supply common6 AC COM

EGND

AC supply common

Earth Ground

1

1

1

Wire Size and Torque Specifications

1X

2X

5 lb-in

1X

2X

0.55 N.m

1X

2X

0.55 N.m

24 ....12 AWG

24 ....16 AWG

0.25 ..... 2.5 mm2

0.5 ......0.75 mm2

0.2 ...... 4.0 mm2

0.2 .......1.5 mm2

PN-154475DIR 10000279788 (Version 00)

Copyright © 2012 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.

WARNING: Be careful when stripping wires. Wire fragments that fall into the module could cause damage at power up. Once wiring is complete, ensure the module is free of all metal fragments. For reliable

input signal processing, input wiring shall be routed in raceways separate from power cabling. For distances exceeding 200 M (656 Ft), the use of shielded cable is recommended.

Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Wiring Diagram

Input Specifications

Basic wiring of input devices is shown below.

Commons are connected internally.

IN 1

1 2 3 4 5 6

IN 2 IN 3 IN 4 EGNDAC

COM

AC

COM

EIMD = 110/120 V ac 50/60 Hz

EIMD60 = 120 V ac 60 HzL1 L2

Voltage Category

Catalog Number

110V / 120V ac

Operating Voltage Range 79V ac to 132V acFrequency Range 47 Hz to 63 Hz

Number of Inputs 4

Heat Dissipation 0.10 W per input

Signal Delay (max.)On Delay: 30 msOff Delay: 30 ms

Off-State Voltage (max.) 20V acOff-State Current (max.) 1.0 mA

On-State Voltage (min.) 79V ac

On-State Current 2.0 mA at 79V ac (min.)10.0 mA at 132V ac (max.)

Inrush Current (max.) 150 mA

Nominal Impedance28k ohm at 50 Hz21k ohm at 60 Hz

IEC Input Compatibility Type 1

120V ac

193-EIMD 193-EIMD60

79V ac to 132V ac57 Hz to 63 Hz

4

0.10 W per input

On Delay: 30 msOff Delay: 30 ms

20V ac1.0 mA

79V ac

2.0 mA at 79V ac (min.)10.0 mA at 132V ac (max.)

150 mA

21k ohm at 60 Hz

Type 1

Publication 193-IN054A-EN-P - May 2012

CONFIDENTIAL AND PROPRIETARY INFORMATION. THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF

ROCKWELL AUTOMATION, INC. AND MAY NOT BE USED, COPIED OR DISCLOSED TO OTHERS, EXCEPT WITH THE AUTHORIZED WRITTEN

PERMISSION OF ROCKWELL AUTOMATION, INC.

Sheet

Size Ver

Of 11

A 00Dr. DateG. USHAKOW 2-10-10

SPECIFICATIONS FOR1 OR 2 PAGE INSTRUCTION SHEET2-1/8” W x 2-3/4” H - FINAL FOLD

MATERIALSIZE

FOLD

BODY STOCK WHITEBODY INK BLACK

FLAT

8-1/2" W x 11" H 2-1/8" W x 2-3/4" H

Final Fold

2-3/4”

2-1/8”

10000021644

PN-12345DIR 100000000 (Version 00)Printed in U.S.A.

Note: After folding---Printed in (Country where printed)* and instruction sheet number in lower left corner should be visible.

* The printing vendor may change the instruction sheet files to show the correct country.

11”

8-1/2”