Building Information Modeling Portfoliod2oqb2vjj999su.cloudfront.net/users/000/086/707/905... ·...
Transcript of Building Information Modeling Portfoliod2oqb2vjj999su.cloudfront.net/users/000/086/707/905... ·...
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Building Information Modeling Portfolio:
Address: 3781 N.W. 191 St.
Telephone: (714) 760-3365
Email: [email protected]
Software skills demonstrated in this portfolio (AutoCAD, AutoCAD Architecture, Revit, 3D Studio Max, etc)
The Lobby & Waiting Area of the FERRIS DRAFTING, INC. The name of the business is on the opposite wall across fromthe chairs.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
103A
103B
104
101
102
109
112A 112B
1
1
2 2
1
106
107
108
1 SCALE: 1/4 = 1' - 0"
FIRST FLOOR PLAN
202
204A
205 206
207
208
209
210
211
1
4
1
2
444
4
1
3
204B
2 SCALE: 1/4 = 1' - 0"
SECOND FLOOR PLAN
AutoCAD Floor Plans: The floor plan below is the first floor of a two story residential building project that was done in Building Information Modeling II. These two floor plans have the dimensions, room tags, door tags, and window tags. The soft ware used for this project is AUTOCAD Architecture.
First Floor Dimension Plans which was done in AUTOCAD Architecture. This a residential floor plan.
Second Floor Dimension Plans which was done in AUTOCAD Architecture. This a residential floor plan.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
North, South, East, or West Elevation. (BIM 108). Generated using AUTOCAD Architecture.
AutoCAD Elevations:These elevations were generated using AUTOCAD Architecture. The full elevations below indicate the height of the house.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
The East Building Section. BIM 108 Generated by AUTOCAD Architecture. The North Building Section. BIM 108 Generated by AUTOCAD Architecture.
AutoCAD Building Sections: These building setions were generated using AUTOCAD Architecture. The full building sections below indicate the east and northside of the house. These builing sections come from the same floorplans as well as the elevations above.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Exterior Wall Section Detail Exterior Wall Section @ Door Interior Wall Section
AutoCAD Details: Below are vector images of three detail types: Door, Wall, and Window which have brief multileader quotes describing the materials in each of the details. All of these were generated by using the AUTOCAD Architecture software. There are both interior and exterior details of the doors, walls, and windows.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
First floor plan. Generated using AUTOCAD Architecture. This floor plan has CMU Exterior Basic Wall Scaled @ 1/4 in
Revit Floor Plans: The floor plans below are the plans of a two story commercial building project that was done in Building Information Modeling IV. The first floor is on the left side and the second floor is on the right side. The second floor has the roof drawn in the plan. The software used for this ptoject is Revit Architecture.
UP
M
UP
T
T
X100
100
800700600
X900
200300
500
400
26 26
25
25 25 25 25
25
24
24
23
27
1/4" = 1'-0"1 First Floor Plan
DNDN
16
15
14
13 12 11
25
25 25 25 25
25
25
2525
26 26
26
26
26
1/4" = 1'-0"2 Level 2
Second Floor Plan. Generated using AUTOCAD Architecture. This floor plan is the same as the first floor.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Revit Floor Plans With Dimensions: The floor plans below are the plans of a two story commercial building project that was done in Building Information Modeling IV. The first floor is on the left side and the second floor is on the right side. The second floor has the roof drawn in the plan. The software used for this project is Revit Architecture.
UP
M
UP
T
T
2 8 3 0 3 1 3 0 5 5 15/16 3 0 2 6 3 0 4 2 7/16 3 0 3 2 5/8 3 0 2 8
0' -
5"17
' - 1
3/4
"3'
- 0"
3' -
11 1
/2"
12' -
0 3
/4"
35' - 0" 6' - 0" 3' - 5 1/4"0' - 2 3/4"0' - 8"
4' -
8"3'
- 0"
6' -
5"1'
- 6"
3' -
5 1/
2"0'
- 2
3/4"
4' -
5 3/
16"
0' -
2 3/
4"12
' - 2
13/
16"
24' -
1 1
/4"
0' -
5"
45' - 4"
36' -
2"
14' - 4 3/4"
9' -
2 3/
8"
12' - 0 1/8"12' - 8 7/8"
9' -
2 3/
8"
9' -
2 3/
8"
8' - 2 3/4"
3' -
0"
7' -
1 1/
8"
2' - 0 1/8"
3' - 0"3' - 0"
8' - 0 1/8"
0' - 9"
1' - 0"
1' - 3 5/8"
3' - 0"
8' - 5 1/4"
2' -
0 1/
2"2'
- 0
5/8"
1' -
2 3/
4"2'
- 3
3/16
"2' - 6 1/2"6' - 0"
9' -
10 1
1/16
"3' - 0"
5' -
8"0'
- 7
11/3
2"
6' - 5 1/8"
6' - 10"
6' - 5 1/8"
5' -
11 1
/4"
18' - 3 3/8"
3' - 0"
3' -
0"
8' - 2 3/4"
6' -
0 7/
8"
10' -
8 1
/2"
7' -
1 1/
8"
17' -
2 1
/4"
11' - 6 3/8"
31' - 3 7/8"
13' -
6 7
/8"
7' -
1 1/
8"
18' -
4 1
/8"
6' -
10 1
1/16
"
X100
100
800700600
X900
200300
500
400
26 26
25
25 25 25 25
25
24
24
23
38 SF
ELEVATOR102
50 SF
MEN RESTROOM104
242 SF
RECEPTIONIST100
132 SF
OFFICE106
110 SF
OFFICE107
117 SF
OFFICE108
337 SF
LOBBY109
59 SF
ELECTRICALROOM
101
194 SF
STAIRS103
58 SF
WOMENRESTROOM
105
DNDN
34' -
9 1
/8"
44' - 10 3/8"
12' -
0 3
/4"
24' -
1 1
/4"
0' -
5"
3' -
10 1
/4"
3' -
0"5'
- 2"
3' -
0"1'
- 1"
3' -
0"1'
- 2
11/1
6"3'
- 0"
5' -
11 7
/8"
3' -
0"2'
- 5
5/16
"
34' - 6 7/8" 3' - 0" 1' - 3" 3' - 0" 3' - 0 1/2"
0' -
5"16
' - 1
1 5/
8"3'
- 0"
4' -
1 5/
8"
9' -
2 3/
8"
14' - 4 3/4" 12' - 0 1/8" 12' - 8 7/8"
7' -
1 1/
8"
10' - 9 3/4"
10' - 10 3/4"
3' - 0"
8' - 5"
3' - 0"
3' - 0"
8' - 7 3/4"
28' - 8 7/8"
3' -
0"3'
- 0"
6' -
0 7/
8"
2' -
6 7/
8"
3' - 0"
10' -
2 1
/4"
18' - 3 3/8" 6' - 5 1/8" 6' - 0" 2' - 2 1/8"
5' -
11 1
/4"
6' - 10"
11' - 6 3/8"
10' -
8 1
/2"
11' - 6"
3' -
7"1'
- 5"
2' -
6 7/
8"10' - 9 3/4"
0' - 6"
1' - 1 1/8"
0' - 7 1/8"
9' -
2 3/
8"
9' -
2 3/
8"
16
15
14
13 12 11
25
25 25 25 25
25
25
2525
26 26
26
26
26
553 SF
OFFICE AREA200
RedundantRoom
BREAK ROOM201
54 SF
ELECTRICALROOM
202194 SF
STAIRS203
66 SF
MEN RESTRM204
77 SF
WOMEN RESTRM205
132 SF
CEO OFFICE206
110 SF
ACCOUNTINGOFFICE
207
117 SF
OFFICE208
First floor plan. Generated using AUTOCAD Architecture. This floor plan has CMU Exterior Basic Wall Scaled @ 1/4 in. The same plans with the dimensions as on previous plans.
Second Floor Plan. Generated using AUTOCAD Architecture. This floor plan is the same as the first floor. The same plans with the dimensions as on previous plans.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Revit Reflected Ceiling Plans: The floor plans below are the reflected ceiling plans of a two story commercial building project that was done in BIM 202. The first floor is on the left side and the second floor is on the right side. The second floor has the roof drawn in the plan. The software used for this project is Revit Architecture.
Reflected Ceiling Plan with thelight fixtures inserted in the plan using two differ-ent light fixtures for the lighting plan for the floor plans on the previous two pages. These plans were generated by using the Revit Architecture software. This is the plan for the first floor.
Reflected Ceiling Plan with thelight fixtures inserted in the plan using three dif-ferent light fixtures for the lighting planfor the floor plans on the previous two pages. These plans were generated by using the Revit Architecture software. This is the plan for the second floor.
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Revit Elevations:Below are two of several elevations of the same floor plans above generated by using Revit Architecture. The scale of these eleva-tions below is measured at a 1/4” = 1’-0” and the height of the commercial building is measured at 24 feet from the foundation to the roof.
OFFICE AREA NORTH ELEVATION OFFICE AREA SOUTH ELEVATION
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Revit Elevations:Below are two of several elevations of the same floor plans above generated by using Revit Architecture. The scale of these elevations below is measured at a 1/4” = 1’-0” and the height of the commercial building is measured at 24 feet from the foundation to the roof.
EAST HALLWAY ELEVATION WEST HALLWAY ELEVATION
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Revit Details: Below are vector images of two detail types: Interior Door and the Roof which have brief multileader quotes de scribing the materials in each of the details. All of these were generated by using the Revit Architecture software. There are both interior and exterior details of the door and the roof.
CASE OPENING FRAME
INTERIOR WALL PARTITION
SINGLE FLUSH DOOR36" X 84"
1/2 GYPSUM BOARD
WOOD STAIN TRIM
0' -
3"
0' - 4 5/8"
BREAK LINE
1' - 7"
GUTTER
FASCIA FLAT 1 x 12
PLYWOOD 7/8"
ROOF DECKING SIDE1.5 IR 20
3" RIGID INSULATION
BRICK METAL STUD WALL
2 X 6 WOOD STUD
ROOF (GENERIC 12")
BRICK ON METAL STUDEXTERIOR WALL
0' - 5 1/2"
0' -
4 1
/4"
0' - 2 29/32"
0' - 5 1/2"
1' -
1 2
1/3
2"
INTERIOR DOOR DETAIL ROOF DETAIL
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
23 24 25 26 27
1/2" = 1'-0"WINDOWS
1
T
WEIGHT X HEIGHT
SUPPLY 12 X 12
SUPPLY 24 X 24
DIFFUSER 24 X 24
SUPPLY LINE
RETURN LINE
THERMOSTAT
DUCT SIZE
VAV BOX
3/8" = 1'-0"MECHANICAL LEGEND 13' - 0"
7' -
0"
6' -
8"
5' - 8"
6' - 0"
7' -
0"
WOODHM
ALUMGLASS
ALUMGLASS
DOOR LEGEND: SCALE: 1 1/2” = 1’
WINDOW LEGEND SCALE: 1 1/2” = 1’
MECHANICAL LEGEND SCALE: 3/8” = 1’
Revit Architecture Legend Plan: Below are a few of the legends that are within my commercial floor plan above. The legends below are as follows from left to right: window legend, mechanical legend, and the door leg end, In the label of each legend are the scale measure of the items, the names and /or numbers of the items used in the floor plan and the below legends are scaled in InDesign @ 70%.
SINK 26" x 22" SHOWER STALLCOM. TOILET 19"
3/4" = 1'-0"PLUMBING FIXTURES4
PLUMBING FIXTURE LEGEND SCALE: 3/4” = 1’
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
N W CORNER OFFICE: 1st Floor. RECEPTIONIST VIEW
Interior Perspective Renderings: These raster images below are the display of miscellaneous images of the commercial building floor plans. These are other options of the selected images from the first and second floor.
LOBBY WAITING AREA LOBBY AREA
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Interior Perspective Renderings: The raster images below are images of the different rooms and/or offices on the second floor.
SECOND FLOOR O.A. FOYER 1 EAST VIEW
OFFICE AREA FOYER ON THE SECOND FLOOR. There is a working area in the center for large projects, etc.
SECOND FLOOR O. A. FOYER 3 WEST VIEW
SECOND FLOOR O. A. FOYER 2 SOUTH VIEW
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Exterior Perspective Renderings: The raster images below are images of the exterior view of the commercial building. The exterior walls are CMU Brick Masonry with an extra layer of red masonry brick material. One of the images have the exterior wall of the building is laid with masonry stone. The topography represents the grass in the front and back yards. Below are different views of the same building to give the client to view the building. In the scenes, there are different plants, trees, around the building. They were adjusted in the PHOTOSHOP software. The images were generated with the Revit Architecture software.
DIAGONAL ENTRY VIEW DIAGONAL ENTRY VIEW
RICHARD FARRINGTON, JR, | STUDENT BIM PORTFOLIOFERRIS DRAFTING INC.
Exterior Perspective Renderings: The raster images below are images of the exterior view of the commercial building. The exterior walls are CMU Brick Masonry with an extra layer of red masonry brick material. One image has masonry stone on the exterior wall. The topography represents the grass in the front and back yards. Below are different views of the same building to give the client to view the building. In the scenes, there are different plants, trees, around the building. They were adjusted in the PHOTOSHOP software. The images were generated with the Revit Architecture software.
GROUND EXTERIOR VIEW SKYVIEW
ANGLE FRONT VIEW SIDE ANGLE VIEW