Btec CAD

Emily Russell

Emily Russell St Crispin's School Centre no. 51623 Centre reference 8266 Student Registration no. B688610

To close Yenka I have to click on the close button which is at the bottom of the program

Once closed this will appear, to close it completely you must click exit

This box will appear and all you must do I right click on the white area around it to make it disappear

To open 2D Design I must first go to desktop and double click on 2D Design V2

P1First I go onto desktop and double click on Yenka

Then I have to click accept to open Yenka

Now the Yenka home screen has appeared. Click on PCBs with electronics because you can make a circuit with a PCB and have all the components in a tool bar.

A box will appear. It has many different options. You can either go to task manger and stop the programs that are freezing your computer or if nothing else works you might have to shut down your computer

If there is a problem and the computer doesn’t respond do not try and press every single button because this will slow it down even more. Wait a few seconds to see it I can recover. If not you need to press Ctnl Alt Delete.

Once you have clicked top X, the program is gone.

Closes program

Closes work

To close 2D Design I must click on X. There are two, the bottom one closes your work and the top one closes the program.

When starting up a program some boxes my try to divert you. In this case a Home Licence Confirmation is needed. For this you need common sense. Always reed the text to find out what it wants and it says it will only work if you are at home so you must click I’m at home.

Some programs might take a while to load so just wait. Most programs have a loading sign such as the one above, they can be very different. After a while if nothing happens try and exit and restart the program, you might even have to do ctrl alt del.

Some programs might need to be connected to the internet. If your internet is not working then there is a problem with your computer, signal or even internet might just be down. To find out go to the bottom left of your screen and look for this sign.Right click and Diagnose andrepair. This will hopefully find the problem and solve it so internet works.