Media Sponsor:

Sponsored by:

For exhibitor/visitor infoplease contact us today at:

sales@eci-international.com Tel: + 44 (0) 1892 863888

Fax: + 44 (0) 1892 863828www.eci-international.com

INTERNATIONAL

ISSUE 59, 10, 11 OctoberEventCity, Manchester, England

The three-day show will bring together thousands of exhibitors, senior executives, industrybodies and visitors, with a common purpose of doing business and sharing information in adedicated, trade-only environment.

Visitors to the show will appreciate the easy access to the new venue at EventCity(www.eventcity.co.uk). Located next to the famous Trafford Centre, it enjoys direct access offthe M60 motorway network together with excellent public transport links from airports and railstations. Importantly, there is free onsite parking for 3,000 vehicles and the hotels andentertainment of Manchester city centre are a short taxi ride away.

As the bi-annual focal point of the UK tyre and equipment sector, the show’s principalsponsor, the NTDA, says:

“A visit to Brityrex is a must for anyone working in, or thinking of getting involved in the tyreindustry. The show will be a major gathering point for the industry, especially with theimpending legislation on tyre labelling and TPMS, which will be covered in detail through the free Tyretalk seminars. Along with dozens ofexhibitors showing the latest in tyres and equipment, the NTDA annual dinner and TAFF Awards is the flagship event running alongside theexhibition,” says NTDA director Richard Edy.

A highly-visible Brityrex blimp, riding high above the venue, will ensure the location is easily identifiable and visitors can also take advantageof a free Wi-fi service in the exhibition hall.

Pre-registration is now available to avoid queuing on the day; simply click the Brityrex links at www.eci-international.com

TVS Srichakra Limited is one of India’s largest two and three wheeler tyre and tube manufacturer, producing over 19million tyres every year. As part of the USD 6.5 billion TVS Auto Ancillary Group, TVS Srichakra has over 29 yearsexperience and is making strong in-roads across the globe with a range of tyres for international markets.

Established in 1982, the Company started with tyres and tubes for two/three wheelerapplications for the domestic market. Today, the Company manufactures industrial

pneumatic/solid tyres, farm and implements tyres, skid steer tyres, multipurpose tyres andflotation tyres and much more for the export market. This prolific product spread is created atthe Company’s state–of–the–art manufacturing facilities located at Madurai and Rudrapur. TVSSrichakra is the leading supplier to several Original Equipment Manufacturers in India likeBajaj, Hero MotoCorp, Honda Motors, M&M, TVS Motor Company, Yamaha Motors,Piaggio etc.

Today, TVS Srichakra manufactures the “Eurogrip” brand of off-road tyres for theoverseas market, a portfolio that has seen considerable growth over the years. TheCompany also has major OEM accounts in USA, Europe, Africa, South America, SouthEast Asia, Middle East and currently exports to over 65 countries across the globe.The Company crossed Rs.10 Billion turnover in 2011 and has an ambitious growth

plan to close at Rs.20 Billion mark this year. TVS Srichakra Ltd. is one of the fast growingcompanies in India and has been listed in the Top 500 companies.TVS Srichakra is participating at Brityrex’12 in hall no 4, stand no 79 . For more details

please visit our website www.tvstyres.com

Brityrex International gearing up to play host to the largestgathering in the UK tyre calendar

Brityrex International 2012, Event City, Manchester, 9 -11 October 2012

2012

Tyre Bay Direct is looking tostrengthen its position as one ofEurope’s premier suppliers ofquality tyre service equipment andconsumable items by exhibiting atthis year’s Brityrex show. As one ofthe newest supplier members of theNTDA and with over 50 yearsexperience in the tyre industry TyreBay Direct are keen to discuss theneeds of tyre fitters today andprovide valuable solutions.

Leigh Stote, Sales and MarketingDirector; says “Being heavilyinternet and mail order based Tyre Bay Direct welcomes opportunitiesto meet new and existing customers at events such as Brityrex andbuild stronger relationships with our ever expanding customer base.”

Tyre Bay Directs main attraction will be their famous Unite machinepackages which all come with a 2 year manufacturers warranty asstandard. There will also be displays of consumable and garageequipment including an impressive TPMS showing, demonstrating thefull range of lines that Tyre Bay Direct stock in their purpose built20,000 sq ft warehouse in the Midlands!

As another big feature along with the tyre machinery, Tyre BayDirect will be showing off theirUniflate nitrogen systems whichhave been supplied to Formula 1Grand Prix racing since 1992.Additionally, the most advancedcustomer retention package ever,the Nitrofill Auto Club will beunveiled which can increasetraffic to tyre centres up to 4 fold!Combining this with the Uniflatenitrogen systems which areinstalled in thousands of tyrecentres in the UK means visitorswill see the very best options ofNitrogen inflation.

www.tyrebaydirect.com

Tyre Bay Direct

PCL has chosen BrityrexInternational 2012 for the UKunveiling of its exciting new NEXUSrange of Nitrogen Generators andInflators at Stand 50.

The new range will further enhancePCL’s reputation as the global marketleader in the design, manufactureand distribution of digital tyreInflation equipment.

NEXUS is the most advancedrange of Nitrogen Generation andNitrogen Inflation equipmentavailable to date, bringing trueinnovation in design to the Nitrogenmarket.

As with all PCL products, the NEXUS range has been designed andmanufactured with the same principles that have established PCL’sexcellent worldwide reputation for high quality products:

NEXUS excels in:• Performance – out-performing the competition with, faster flow

and faster inflation, getting the job done quicker. This focus onperformance and efficiency means increased revenue/profitopportunities for your business.

• Quality – thoroughly tested to exceed international standards,giving you complete peace of mind.

• Comprehensive Range – a wide range to meet any requirement –“for any & every occasion”

• Longevity – using only the latest technologies and the highestquality of components and materials, to deliver the reliability anddurability for the toughest of environments. Built to last!

• Experience – almost 75 years of designing and manufacturingpneumatic equipment and a vision to proactively provide the best,most reliable and efficient inflation equipment.

For more about NEXUS and how Nitrogen can help your businessprosper visit PCL at Stand 50.

Details of PCL’s full product range are available atwww.pclairtechnology.com

PCL’S Nexus A New Generation For Nitrogen

Established for over 25 years, the Michelin Training Centre in Stoke-on-Trent has long been considered the reference for tyre industry training inthe UK and Ireland. It offers a comprehensive portfolio of more than 100 training courses, many with City & Guilds, IMI and REACT accreditation,covering all aspects and roles in the tyre industry. These range from fitting and technical courses for tyre fitters and technicians, to sales trainingfor site and field-based staff and management training and development courses for depot managers and business owners.

Training and development of people is essential for the future of every business, and that’s why we trained more than 1,500 people last year,helping improve standards in the tyre industry. Well trained staff can bring increased sales, improved staff retention and higher levels of jobsatisfaction; Michelin Training is proven to be a smart investment.

The fully equipped training centre in Stoke-on-Trent boasts the latest technologies, with six lecture rooms, an IT suite, on-site truck, agricultural andearthmover workshops, mocked up tyre dealer premises and video / role-play facilities. Alternatively, members of our dedicated training team candeliver training at your site, tailored to your requirements.

The Michelin Training Centre will be exhibiting at the Brityrex show for the first time in 2012 and we look forward to meeting you and discussingyour individual training needs.

www.michelintraining.co.uk

Michelin Training Centre

On time and on budget! A simple statement but a commitment thatMaritime Cargo Services (MCS) makes to all its clients in the tyreindustry.

Dedicated to delivering the highest possible standards of customerservice, MCS offers a highly cost effective, end-to-end supply chainsolution for all of your sea freight and container delivery requirements.MCS is the leading freight forwarding specialist in the tyre industrylooking after more than 20 major tyre importers and managing theCustoms Clearance and delivery of thousands of containers to well overa hundred tyre warehouses and depots throughout the UK and Ireland.

With estimates that shipping costs typically represent somewherebetween 3-10% of the street price of tyres, MCS appreciates that effectivefreight management is a hugely important consideration for tyreimporters in today’s market.

To guarantee an optimum freight management service, MCS offers tyreimporters an online freight management and tracking system, MOATS,which was designed to encompass all of the customer’s relevant shippinginformation. Monitored, updated and available online 24/7, MOATS isa fast, flexible and multi-faceted online system supplying tyre importerswith real-time information safely and securely and is provided to allclients free of charge. Coupled with MCS’s proactive, efficient andfriendly team of freight management experts, the company hasrevolutionised many of its client’s delivery systems.

Located on stand number 47, make MCS your first ‘port of call’ atBrityrex. We look forward to welcoming you aboard with a bacon buttyand a drink.

www.maritimecargo.com

MAM Software will be using theBrityrex 2012 event to demonstrateits Autopart Tyres Suite for tyredistributors, auto centres and fast-fitchains. This new best-of-breedsolution integrates functionality fromacross MAM's software range todeliver a rich business managementplatform for companies in bothretail and wholesale sales.

The Suite provides a wealth ofcore functionality including product and price management, purchaseorder processing and comprehensive stock control. Flexible point-of-salecapabilities cater for wholesale, retail and servicing operations whilededicated e-commerce functionality facilitates online trading across thesupply chain. A powerful business intelligence module allows managersto achieve an accurate assessment of their company's performance.

In addition to this core functionality, many new features will be ondisplay at the Brityrex event:

• EU tyre labelling functionality• EDIWheel real time stock ordering• SMS messaging directly from the system• Comprehensive reporting features• Sales, purchasing and nominal ledger functionality• A sophisticated warehouse management module

To find out more about these features visit MAM Software at stand 48at the Brityrex 2012 event.

Vortex, making its firstappearance at the BrityrexInternational Show has targetedto sign up 10 new UK dealersat the show and will visibly upthe ante in the drive to gainmore export sales.

Exhibiting on stand 43, potential customers can learn moreabout the exciting British made revolutionary patented Vortexexhaust.

“With our unique product range we can change the face ofthe UK exhaust market” Barry Mead, MD of Vortex commented.By dealing with Vortex, Garages, fitting stations and workshopsonly need to hold limited amounts of stock to satisfy the vastmajority of the market. Vortex dealers need to be able to weldand require pipe bending equipment, which can be suppliedas part of a dealership package. Vortex dealers can createexhaust systems for cars, vans, pick-ups, 4x4’s, sports cars; themarket potential is endless.

Vortex systems are not “me-too” products. They are totallydifferent from mainstream exhausts and offer garages andfitting stations opportunities to make good margins and deliverreal customer satisfaction. Because of the unique design allVortex exhausts are guaranteed to increase power and torque,while at the same time reduce tailpipe emissions and best of allsave money on fuel bills.

Fleet managers could do far worse than spend 20 minutesfinding out how much they might save by fitting Vortex exhauststo their vehicles.

Vortex is embracing an “Eco-management” philosophy that isbeing rolled out across all of its products and intends toannounce some new initiatives at the show.

www.vortex-performance-exhausts.co.uk

GEBHARDT was founded in 1892 andsince then has been focusing on products“Made in Germany“. The companyconsiders tradition combined withinnovation as its core value. We havealways attached great importance toworking in international markets and wewant to expand our already advanced“Tires & Wheels“ business even further.

With the introduction of the new ECOTIRErack®, weconveniently round off the GEBHARDT range of servicesregarding tire racks. The newly designed rack, which is entirelymanufactured in Germany in domestic production, sets abenchmark regarding reasonable price, low weight and highquality.

This was proved during a practical test which was executed ata leading company of the sector before the market launch. TheGEBHARDT ECOTIRErack® is the perfect example for the factthat reliability and quality do not inevitably stand for high prices.

Many companies have already chosen this tire rack as theideal solution for their warehouse. For more information on theECOTIRErack®, our complete product range and on whatGEBHARDT can do for you – visit us at this year’s Brityrex at Hall4 / Stand 24.

www.gebhardt.eu

New Dealers The Challenge For Vortex Exhaust

GEBHARDT tire racks: Efficient and reliable– Made in Germany

MAM Software to showcase its Autopart Tyressoftware with tyre labelling and other new features

Albrecht Auto-Zubehör GmbH, founded in 1919 and based inGermany, is Germany's leading manufacturer and distributor ofplastic wheel covers. Our high quality products are distributed toa worldwide market. Albrecht Auto-Zubehör GmbH offer a widerange of wheel covers in different qualities, designs and inches.

We are very glad to have this platform at Brityrex to present ourwheel covers for the first time in GB.

On stand 103 we would like to welcome you and draw yourattention to our wheel covers, especially to our latest designs. Ourstaff members will be pleased to answer all your questions andgive you all necessary information.

For further detailed information please visit our homepagewww.albrecht-az.de

Visitors to the Kings Road Tyres (KRT) stand at Brityrex will be able to selectfrom an unrivalled range of brands covering applications for truck, bus,agricultural, OTR and industrial fitments.

With 40-years involvement in the wholesale sector, KRT prides itself on theproductive, long-term distribution relationships it has developed with manyof the world’s leading tyre manufacturers.

KRT offers commercial users an extensive choice of products from premiumOE manufacturers to exclusive distributorships. The company’s Truck & Busrange includes brands such as Bridgestone, Continental, Goodyear andPirelli, with Firestone and Matador TBR in the mid-range sector with Aeolusand Antyre completing the line-up.

For agricultural and industrial customers KRT is the exclusivedistributor for Bridgestone, Taurus AGR, Farmking, Jetire and Wanda.They are also official wholesale partners for Michelin, Goodyear,Trelleborg, Kleber and Firestone.

Completing the offer is KRT’s Kingstone private brand of tyres and tubesfor construction, OTR industrial applications and high speed crane.

“As the UK’s top tyre event Brityrex will be a great opportunity todemonstrate our extensive ranges of brands across the market sectors weare strongest in, truck, bus, agricultural, OTR and industrial applications,”says Tim Bader, KRT’s Purchasing and Marketing Manager. “ In addition,visitors can pick up copies of our new Commercial Range Guide on thestand, which for the first time combines all products in a single publication.”

High quality Chinese tyre manufacturer Aeolus will be exhibiting in itsown right for the first time at this autumn’s Brityrex Internationalexhibition in Manchester (Stand 45). This will provide the opportunity totalk in-depth and face-to-face with the trade about the quality and valueavailable to commercial users.

Aeolus is among the longest-established Chinese tyre manufacturers,having begun production in 1965. Since then it has developed into aworldwide brand with a growing presence in the UK. This has recentlybeen reinforced with the launch of a dedicated new website to improveawareness and knowledge of the company’s extensive range ofspecialist tyre applications.

www.aeloustyres.co.uk includes size, application and technical detailsfor the comprehensive ranges of Aeolus TBR and OTR products coveringRegional Haul, Long Haul, Mixed Service and City Urban products forcommercial vehicle, coach, city buses, low loaders, semi-trailers andtippers. Aeolus also supplies a wide range of OTR tyres for an extensivevariety of applications, from quarry to high speed crane.

At Brityrex the company will premiere the launch of new wider casingSteer and Drive Axle tyres for commercial applications.

Antyre is an emerging manufacturer of quality truck and bustyres that will be making its debut as an independent brandat Brityrex International 2012.

Introducing the brand and building awareness among TBRstockists and fleet buyers is the company’s major objective. Arange of products will be on show on the Antyre stand,number 18.

Among these will be the new patterns TB1000 in size385/55R19.5 and TB2000 in 445/45R19.5 plus435/50R19.5.

Perennial Brityrex exhibitors,Hofmann Megaplan, willonce again be showing theirwares at this years Brityrexevent, and adding a bit of excitementto the whole affair by running acompetition for a free Lever-less tyrechanger!

Last time round, the free entrycompetition was well received,and resulted in one luckyvisitor – Mill Tyres of Boston –receiving a free lever-lessmachine that has since becomethe flagship of their tyre bay.

Displayed in the main foyerfor all visitors to see, entrantswill simply have to visit the HofmannMegaplan stand and fill in a brief questionnaire toautomatically put them in the hat. As per 2010, the luckywinner will be selected from a hat by show organiser PaulFarrant.

Also on the stand will be a selection from HofmannMegaplan’s extensive line-up, including the latest wheelbalancing technology with laser positioning, nitrogen inflation,and an example of their premium quality lifting range.

As always, expert advice will be on hand in the form of HofmannMegaplan’s knowledgeable and enthusiastic technical team.

www.hofmann-megaplan.co.uk

Infinity Tyres will be participating at this year’s Brityrex Internationalexhibition, the UK’s premier tyre trade and aftermarket equipmentshow, where it will prove to be the perfect venue to get closer to its UKcustomers, partners and associates.

Having had its formal introduction during its Partners Day trip inChina, and its European launch during the Reifen Essen 2012 Show,Infinity will be very proud to show and discuss its new Ecosis andEcomax tyre range during Manchester’s show in October.

Our Infinity sponsored UK drift team, which is enjoying a verysuccessful 2012 season will be at the show to launch their new 2013car, which will be displayed for the first time at the show.

www.infinity-tyres.com

2012

In the build up to this year’s Brityrex International Show, REMA TIPTOP AUTOMOTIVE UK Limited are preparing to open the companydoors in style.

The event promises to be a showpiece of the company’s most cuttingedge range of garage equipment and consumables to date. To be a partof the show come and visit us between 9 - 11 October, 2012 EventCity,Manchester– stand number 51, hall 4.

Visitors to the stand will have the opportunity to see spectacular newadditions to the range of workshop equipment which include thePromaxx 8240-2 LL (leverless) tyre changer and Kendo 30 Lite. Theseamazing new machines change standard tyre and wheel assemblies withease and make light work of the most demanding run flat tyres withoutthe assistance of tyre levers. In addition there will be a chance to seedemonstrations of the highly acclaimed Promont 924 Truck tyre changerand a range of balancing machines for both car and truck including thenew Probalance NG wheel balance and diagnostic system and 7425Professional car wheel balancer with 17" TFT monitor.

The Probalance NG (Next Generation) is a very exciting productdevelopment which largely negates the need for manual operation,relying on built-in automation to measure wheel size, balancing values(processing optimum) and eccentricity of tyre, rim and wheel. The wheelis even guided into position by an exclusive automatic lift called ZeroWeight.

This year’s show also presents the first chance for the tyre trade toexamine the NTDA award winning Ramrod TIRE SAFE safety inflationenclosure at first hand.

TIRE SAFE will safely contain, and direct harmlessly, the explosiverelease of pressure that occurs when either a tyre carcass or sidewallsuffers catastrophic structural failure.

TPMS will naturally also feature heavily at this year’s show for REMATIP TOP. To service the growing demand REMA TIP TOP AUTOMOTIVEofficially launch thenew ‘Sensor Intelligent Technology’ TPMS programfrom Alligator. The new sens.it TPMS sensor provides a complete solutionfor the replacement of OE TPMS sensors for both small and large tyreshop chains.

In 2012, REMA TIP TOP AUTOMOTIVE UK Limited became official UKdistributors of the Werther range of lifting equipment.

The agreement with Werther signals the company’s real commitment toprovide a comprehensive installation and service package to itscustomers. Two lifts will be featured on the stand at Brityrex including theWerther S39 scissor lift and 301 two post lift.

REMA TIP TOP AUTOMOTIVE UK also welcomes its close friendsCompac to this years show, who will feature and demonstrate its qualityrange of trolley jacks on the stand. Compac are renowned for longservice life, high quality raw materials and uncompromising attitude tosafety. Workshop personnel visiting the stand will also be interested inGaither's Bead Bazooka™. The Bead Bazookacombines the most powerful Automatic RapidAir Release System and easiest-to-handle tank for seatingtubeless tyre beads. Simply fillthe tank and FIRE! Theinstantaneous blast of air fromthe 6 Litre tank will work ontruck (including super singles),passenger, motorcycle,ATV and small AG tyres.

Demonstrations of all the equipmentmentioned in this featurewill be run throughout thecourse of the show. We lookforward to seeing you there.

www.rema-tiptop.co.uk

At Brityrex 2102, Harvie Tyres Limited will launch theirsuperb new range of Mondolfo Ferro workshop equipment.The Harvie team will be located on stand 73, Event City,Manchester. Harvie will be demonstrating the Raptor with the"SENZA LEVA" (Without lever) tyre demounting technologyand AS944 LL tyre changing machines. The MT3200,MT3400 Easy Alu and MT3350 Ergo Laser wheel balancerswill also be operating on the stand for the duration of the showwhich takes place between 9th-11th October.

Harvie is excited to be exhibiting at Brityrex and believesthat it as a crucial platform to showcase new developments inits range of capital equipment and workshop tools andconsumables. UK Sales Manager, Stuart John, is eager tofurther grow market share of capital equipment in the UK andstates “the Mondolfo Ferro range of workshop equipment is anexciting development for the company and is sure to providethe quality and reliability demanded by our discerningcustomer base”.

Harvie are also key distributors in the UK of Prema tyrerepair material, in addition to stocking a superb range ofairline equipment and accessories from PCL and balanceweights from Hatco. In fact Harvie supply everything for theworkshop including a superb range of bead lubricants,associated chemical products, valves and accessories, airtools and torque wrenches.

www.harvieprema.com

ENTERTYRES UK LTD is making its debut at Brityrex Int’12.Company has many years experience with trading in highquality retread car tyre within the UK market. Within last coupleof years tyres have been sold in the English, Scottish and Irishmarket and the Company has achieved high sales targets andhas became a trusted and long term supplier for many tyrecompanies throughout the UK.

ENTERTYRES UK LTD will be exhibiting on stand 50C atBrityrex and during the show will exhibit summer and winterretread car tyres range of popular sizes from 13 inch to 17 inchand also commercial van tyres. Thanks to a professionalcustomer service from ENTERTYRES UK LTD all visitors visitingstand 50C will be impressed by the product range andinformation available and will be able to spend quality timediscussing their tyre requirements with a positive outlook on themarket. Tyres are ENTERTYRES passion. Visiting ENTERTYRESUK LTD during this year's Brityrex show is highly recommended!

www.entertyres.com

Leading tyre wholesaler Bond International has signed up for a major presence at October’s Brityrexexhibition in Manchester.

The Pocklington, York-based company will be using the show to promote its portfolio of six exclusive UKdistributorships for brands including Marshall, Infinity, Admiral, Jinyu, Sailun and Rotalla.

Company founder and managing director, Reg Bond, says: “When we decide to promote the company we always give it 100% and do it instyle. That’s why we have taken a major stand at Brityrex that will give us the space and prominence to display our exclusive UK brands tomaximum effect. We have thousands of customers across the country and we want to give them a good reason to travel to the show and visitour stand.

“The UK is a major international market for tyres and deserves to have a show that reflects that status. We hope other companies will followour lead and make Brityrex 2012 a show to remember.” www.bondint.co.uk

Bond International to exhibit six exclusive brands at Brityrex International

Exhibiting at Brityrex after a long absence, Cam Systems, the leadingsoftware solutions provider to the independent tyre industry, is taking theopportunity to unveil its new Retail Customer Relationship Management(CRM) application to its Cameo customers, providing them with options formore effective customer contact, sales conversion and business intelligencefor retail operations at the counter, on the phone and over the web.

Early adopters of the Retail CRM module have worked with Cam Systemsto design key benefits into the new system such as optimising the captureand maintenance of customer and activity data, converting immediate andfuture business opportunity, understanding and utilising the most effectivecommunication channels with individual prospects and customers, and,ultimately, being able to measure and direct advertising and marketingexpenditure more cost-effectively.

Moreover, with Brityrex being held only three weeks before the advent ofthe 1 November EU legislation around tyre labelling, Cam will beshowcasing its tyre labelling solution on its Cameo platform. Cam’s TyreLabelling solution has been designed to offer Cam customers options topresent a professional, high quality image to motorists, providing retailerswith the opportunity to upsell to higher margin brands. The company isinviting all Cameo customers and their business partners onto its stand todiscuss practical and operational considerations for tyre labellingcompliance.

www.cam-esystems.co.uk

Cam Systems Takes Centre Stage at Brityrex withits New Retail Customer Management Launch

and Tyre Labelling Consultations

SINOTYRE International Company Limited is one of the leadingtyre companies founded as per modern enterprise system and itspecializes in world tyre market research and Import & exportbusiness. Thereinto, Exp. & Imp. business develops very rapidly.It has built wide sales marketing networks all over the world, anda lot of high grade tires made-in-China have been exportedoversea successfully by our global customers. We also introducesome advanced culture, technologies, equipments and materialswhich guarantee the company take a lead in this market. Inaddition, nature rubber, auto parts and chemical additives arealso within our business scope.

SINOTYRE has its own production factory and one professionaltechnologist team which assure us for the different and specialexams and tests according to the different markets and clients.

SINOTYRE also has good relationships with different tyremanufacturers and some other auto partsfactories which can meet the different andindividual requirement in this area.

In the new century, SINOTYRE willdevelop itself step by step based onthe services with all the heart to anyfriends around the worlds. What'smore, it has a professional, efficientand reliable work-team who makeSINOTYRE be on a good wicket in thefurther competition.

www.sinotyre.net

Guizhou Tyre Company Ltd will once again be exhibiting at Brityrex –Stand No 71.

Here we will be showing our range of Advance Radial/Bias OTR tyres,Radial truck tyres, Agricultural tyres and Industrial/Fork Lift tyres.

For over 50 years we been manufacturing Industrial and OTR tyres fromour factory in Guiyang located in the South West of China.

We are now in the process of building a new factory to increase ourproduction capacity. It will have a land area of 1.5 million sq. metres anda building area of 610,000 sq. metres with a planned capacity of 12.8million tyres per year.

The new factory will be used to increase capacity of our current rangeand produce a new range of radial passenger tyres and radial farm tyres.These new additions to our range will enable us to supply to our customersa greater range tyres across different sectors allowing for economicalsourcing and container filling.

We look forward to welcoming existing and potential new customersto our stand.

www.advancetyre.biz

Ling Long Tyres, manufactured by Shandong Ling Long TyreCompany, will be participating at this year’s Brityrex Internationalexhibition, the UK’s premier tyre trade and aftermarket equipmentshow, where it will prove to be the perfect venue to get closer toits UK customers, partners and associates.

Ling Long Tyres were founded in 1975 in Zhaoyuan city, andthe company has devoted itself to the research and manufactureof high quality tyres ever since. Today the company is among theTop 500 Chinese Enterprises and is accredited as one of China’s“Outstanding Private Enterprises”.

It is also one of the 3 largest tyre manufacturers in China andranked as No. 16 in the world in 2010. Furthermore, because ofits continuous focus on brand building and quality control, LingLong, which employs over 5000 people has been recognised asone of China’s top 500 most valuable brands.

The company has been increasing its first-class TechnicalCentre, post-doctoral workstation and is responsible for creatingthe first noise lab in China.

Nordexx® is NDI's (Nordisk Dæk Import A/S) Private Brandtyre for cars and vans designed by NDI's innovative branch inDenmark together with the tyre plant technical staff. The tyresmeet all requirements for any modern vehicle owner whoappreciates the diversity of models in summer and winter tyres.The tyres meet all European and American standards and aremanufactured with an eye to the overall costs. This enables usto offer a financially feasible product without having torenounce comprehensive quality, design and accessibility.

www.ndi.eu

As of July, the first end consumerpackage will be available forHPW 380 coloured adhesiveweights. Containing sixadhesive weights of 60 gramseach, the package comeswith exactly the right size ofkit required to balance avehicle.

The packages are suppliedin a box that has room for 24packages. Made of high-quality materials anddesigned to be functional too,the box can also be used asa display stand. In addition tosilver, black and chrome, theweight is now also availablein red, blue, yellow, orange,white and anthracite.

The brand new Speedliner® adhesive strip for balanceweights is designed to help workshops save both time andmoney in large quantities. Boasting an even higher initial tackas well as the ability to remove the weight from the wheel rimwithout leaving any traces, it makes balancing a breeze.

In June 2012 Hofmann Power Weight introduce its greatestinnovation yet. A patented new type of adhesive strip whosename says it all: Speedliner. This product makes everyday lifein the workshop considerably easier thanks to the manyimprovements it brings. And now the Speedliner® can befound on all HPW 380 adhesive weights.Profil deals with production and wholesale of retreaded car tires for all types

of cars: personal, delivery and off-road ones, in many sizes and manypatterns of the tread, both winter and summer types.

The retreading, also called the regeneration, consists in placing a new layerof the tread on the tire and strengthening the tire sides. The final product is atire whose parameters do not differ from the parameters of a new tire (equallydurable) and which is in fact more preferred in the world taking intoconsideration environment protection (recycling)

The Profil company regenerates mainly tires for personal, delivery and off-road cars, in typical sizes: 13, 14, 15, 16, 17, and 18 inch ones, as theyare the most popular sizes on the market. The technology of producing thetreaded tire and the tire itself are characterized by high quality, durability andgood use, which is especially important taking into account the safety ofdriving. Apart from the above-mentioned features, it has much lower pricethan the new tire. Our company buys the highest quality products from well-established producers of rubber mixes and from foreign tire providers.

Since the beginning of its operation the “Profil” company has paid specialattention to the quality of produced tires. A number of tests carried out beforeand after the regeneration allows us to produce a faultless tire which is readyto be used.

www.profil-zro.com.pl

Philip White Tyres Ltd is anindependently owned family run companyestablished in 1982. The Company has awealth of experience in the tyre industrybeing awarded with several exclusive tyremanufacturer dealerships and can offerthe best quality tyres, products andservices at prices to suit all budgets.

As well as being a successful wholesalerPhilip White Tyres also has retail depotsin Northern and Republic of Irelandproviding an extensive range of garageand motoring services. The Company islooking for Falken Truck key dealers andOrnet Car, Truck and Agricultural dealers throughout the UK.

For further information please visit our websitewww.philipwhitetyres.com

For full exhibitor list please visit www.eci-international.comNote from the Organisers: The Publishers and Organisers do not necessarily agree with the views expressed by contributors, nor do they accept any responsibility for any errors of interpretation in the subject matter of this newsletter.

Winning the NTDA TAFF Tyre & Aftermarket Supplier of the Year awardhas brought even more attention to the technical expertise of our TPMSprogramme. As we are progressing with our training programmes allacross the UK we are receiving more and more positive feedback aboutthe expertise we are able to demonstrate and share with our customers.The response has been greatly appreciated by everyone involved withAutogem.

A common theme has been the ability of tyre traders and garages tonot only retain business which would have been lost without the rightequipment, but to also maximise the tools for greater revenues.

In 2011 we were predominantly informing customers about ourprogramme, so far in 2012 we have been in full swing training them.This support will be supplemented by the introduction of further technicalTPMS product in the coming months.

All in all 2012 is looking like another busy year for Autogem where wewill be exhibiting at 8 shows and dedicating 25-30 evenings to trainingand educational courses for our customers. Our mantra remains, thinkTPMS think Autogem.

www.autogemconcepts.com

Come and see the Supertracker ComputerWheel Aligner featured on “ Youtube” inaction. This system is setting themarket alight with its speed,reliability and accuracy. With thisproduct there is no need to invest in aspecialist lift, so a cost saving there.The Supertracker 410R can be usedanywhere. Alignment lift, four postlift, two post Lift, pit, alignment tables,even on the floor. You do not need adedicated area, allowing betterutilisation of the workshop space.

The rest of the range will be on displayas well. The all important print out isavailable on five of our products. We as a company have a productthat meets all budgets and all technical requirements. As a UKmanufacturer we can build bespoke wheel aligners to meet anycustomer specification.

Supertracker has established itself over the last twenty five years asa company that suppliers products that “do the job” while providinga substantial profit contribution to any company.

Stand number 62, come along and discuss your Wheel Alignmentneeds with one of our technical staff.

www.supertracker.com

Haweka UK, the world’s leadingindependent manufacturer of wheelbalancing accessories and commercialvehicle alignment equipment, areshowing their comprehensive range atBrityrex International.

The Haweka stand will showcase thecompany’s complete range ofcommercial vehicle alignmentequipment including the all-new Axis4000. This fully computerised systemcan now include a complete data setof truck wheel alignment settings to enable real time comparison ofactual readings against manufacturers specifications. The greatestadvantage of the Haweka range is speed. There is no other wheelalignment machine that allows the operator to measure a twin axlesemi-trailer in 10 minutes. The Haweka range is able to do thisthanks to its patented wheel clamps, which are attached to thewheel rim by means of powerful magnetic feet (with additional grabarms for aluminium rims) and the measurement can beginimmediately. These unique clamps are used on all Haweka aligners.

John Pullin of Haweka UK said: “In today’s tough economic climatethe importance of correct vehicle alignment cannot be overemphasised. The equipment makes it possible for the commercialvehicle owner/operator to easily and quickly unlock the savingsavailable from reduced fuel consumption and tyre ware. A onedegree misalignment on one axle could increase fuel consumptionby around 5%.”

To view the new generation of wheel balancing accessories anddiscover how to reduce the running costs of your commercial fleetvisit Haweka UK at Brityrex International on stand number 53 or goto www.haweka.co.uk

Haweka Provide Cost Saving Solutions at Brityrex International

Westlake Tyres, manufactured by ZC Rubber –the world’s 10th largest tyremaker and China’s biggest producer of rubber products– will be participatingat this year’s Brityrex International exhibition, the UK’s premier tyre trade andaftermarket equipment show, where it will prove to be the perfect venue to getcloser to its UK customers, partners and associates.

After having had some of its Senior Management visit some of its EuropeanPartners in April, Westlake are very excited about participating at Brityrex2012 because of the opportunity to show its wide range of products to thevisiting public and reinforce the strong relationship it has with its partners,customers and future clients.

ZC Rubber, which has over 50 years experience in making tyres, expectsits production capacity to reach 12 million pieces of truck/bus radial tyresand 20 million passenger/SUV tyres in 2012.

With over 20,000 employees and hundreds of R&D staff, Westlake isselling its range in over 150 countries. Westlake’s quality control complieswith the ISO 9000 requirements and tyre quality meets DOT and ECEstandards.

Nortenha develops its activity as a retreader and tyre dealer, since thebeginning of the 60´s and produces a large range of retreaded tyres, aspassenger, 4x4, light truck and truck, agricultural applications, industrialand earthmoving. We also buy and sell new tires in all main brands

Nortenha has two laboratories that support manufacturing activity: onefor quality control of raw materials, used in the retreading process; andone for tyre testing, where Nortenha performs load/speed tests inaccordance with Regulations ECE N. º 108 and 109. This latestlaboratory also performs balancing tests.

At the end of the year 2000, Nortenha certified its manufacturingprocess according with the ISO 9001, BVC – Bureau Veritas CertificationN.º 209163, ensuring full compliance with the legal and qualitystandards requirements.

In early 2004, Recauchutagem Nortenha obtained the approval of itsmanufacturing unit, with the numbers E21 - 108R020004 and E21 -109R020005. www.nortenha.pt