Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

34
SQUID FOR CHARACTERIZATION OF MATERIALS Nasser S. Alzayed Physics & Astronomy Dept. King Saud University Riyadh, Saudi Arabia [email protected]

Transcript of Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Page 1: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

SQUID FOR CHARACTERIZATIONOF MATERIALS

Nasser S. AlzayedPhysics & Astronomy

Dept.King Saud UniversityRiyadh, Saudi [email protected]

Page 2: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

OUTLINE.…

Briefing about SQUID

General Applications

Our Application to NDT in Aluminum

Plates

Page 3: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

SQUIDS OUTLINE SQUID stands for: Superconducting

Quantum Interference Device SQUID is a very sensitive Magnetic Flux

detector SQUID is Flux-To-Voltage Transducer Output of Voltage of SQUID is periodic with

Flux Quantum Period фo=h/2e=2.07x10-15 Web

So far, SQUID is the most sensitive device.

Page 4: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

10-4

Field

(T)

SQUID

106

Line frequency and harmonics

Frequency (Hz)

fluxgate

10-2 10-1 10-0 101 102 103 104 105

Lab noise

10-16

10-15

10-14

10-13

10-12

10-11

10-10

10-9

10-8

10-7

fT

pT

nT

MR sensors

MCGMEG

Earth’s field

Page 5: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

MAGNETIC SENSORS

10-2

10-1

100

101

102

103

104

105

0 5 10 15 20 25Frequency [Hz]

Flu

x D

en

sit

y [

pT/H

z1/2]

Hall

GMR

SDP

fluxg

ate SQUID

noise threshold

Page 6: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

SQUID FOR APPLICATIONS

In principle: SQUID can measure any thing that can provide magnetic flux:

Current Brain Signals Heart Signals Magnetization None-Destructive Testing Geophysics Astrophysics

Page 7: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

SQUID combines few Physical Phenomena: Flux Quantization (in a Closed Sup.

Loop) electron-pair wave coherence Josephson Tunneling

Two Types of SQUIDs available: DC- SQUID (Biased using DC current) RF- SQUID (Biased using rf current)

Page 8: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

TYPES OF MEASUREMENTS:

Single Channel Magnetometer

Single Channel Gradiometer

Multichannel Scanning System

Page 9: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

SQUID: SIMPLY SUPERCONDUCTING RING WITH ONE OR MORE WEAKLINKS

Page 10: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

DIFFERENT SHAPE OF SQUID

Page 11: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Bulk RF-SQUID Gradiometer (Hand made)

Page 12: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

PRINCIPLE OF OPERATION

Applying External Mag. field to the Ring

Phase Change across the Links

1 = |1(x)| ei1 , 2 = |2| ei2

Superconductor, 1

WeakLink

Superconductor, 1

Page 13: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Also a current i will loop around the ring

This current shall cancel the Bext

But this does not happen because of the critical current across the Link

Total Phase Change must = 2πn Total Phase change due to applied

Mag. Field:

Page 14: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Tota Phase Change = 2πn a phase due to current i is made to

justfy the total phase change:

Page 15: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Current moves clockwise or (counterclockwise)

the magnitude of i increases to a maximum

Page 16: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Result is: Circulating current is periodic with

applied magnetic field. The period is Фo

Page 17: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

FEW KNOWN INSPECTION METHODS

Visual InspectionAcoustic SoundingSurface Hardness methodUltrasonic TestingImpulse

ResponseMagnetic MethodsResonant

FrequencyInfrared ThermographyRadioactive

Testing

Page 18: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

SQUID SYSTEM FOR NDT

Evaluating cracks in metals no matter how deep

Evaluating Corrosion in concrete without contact

Output can be contour like for more details of defect.

Page 19: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

19

BIOMAGNETIC IMAGING

Need ~1 picotesla sensitivity for real time monitoring

Cardiac magnetic signal

Page 20: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Low-Tc dc SQUID systems for MCG application

CardioMag Imaging, Inc., USA

APPLICATION OF SQUID TO MCG

Page 21: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

P

QRS

T

BASIC MORPHOLOGIES OF MCG IS EQUAL TO ECG

Page 22: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Healthy heart Abnormal

Measured by a 9-channel CMI-3609 system, CardioMag Imaging, Inc. USA

MAGNETIC MAPS OF HUMAN HEARTS - AT A SEQUENCE OF TIMES WITHIN THE T- WAVE

Page 23: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

WHICH WOULD YOU CHOOSE?

Non-contact Non-invasive No radiation Safe Accurate

MCG

ECG

Nuclear scan

Magnetocardiograph

Page 24: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

24

DEFECT DETECTION CAN PREVENT CATASTROPHIC FAILURE

• Need non-destructive test for corrosion, cracks, and stress • Eddy currents imaged with scanned GMR reveal invisible corrosion.

Field image

Optical image

“The crack was in the upper row of rivets along The S-10L lap joint”…

excerpt from NTSB report

Page 25: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

TYPICAL SQUID SIGNALS FOR NDT

Scan of 1, 3, 5, and 10 mm holes in a steel plate

Page 26: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.
Page 27: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.
Page 28: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.
Page 29: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

Solving Maxwell Equations for the Applied magnetic field in the Near zone only:

Page 30: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

The measured field signal is described by a vector. The vector magnitude and angle represent the amplitude and phase angle of the detected signal respectively

Page 31: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

In terms of the field amplitudes, the result shows that the attenuation of a magnetic dipole field through a metal is significantly less than the calculated attenuation of plane wave given by the Equation:

Page 32: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

The reason of less attenuation is ascribed to the fact that usually the attenuation of the field is caused by the shielding effect of the induced current which is normally in opposite phase to the source current. However, the low frequency small circular shieldingcurrent induced by a magnetic dipole has a different phase shift. Hence, the orthogonal component of that shielding current causes no significant shielding effect.Thus, attenuation is less than that calculated for a plane magnetic wave. This better attenuation property of a dipole field inside a metal can be applied beneficially for the NDT.

Page 33: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.
Page 34: Briefing about SQUIDGeneral Applications Our Application to NDT in Aluminum Plates.

CONCLUSIONS

SQUID has been successfully used for: Biomagnetic Applications Non-Destructive Evaluation (NDE) Geophysical Applications Scanning SQUID Microscope