bridas industriales

8/7/2019 bridas industriales

1/13

SPECIALISTS IN THE MANUFACTURE OF ALL TYPES OF FLANGESFOR ALL TYPES OF INDUSTRIES

As from April 1990, Folglade Engineering Limitedhas been re-established as an Associate Company

of Folglade Pipes and Fittings Ltd., with a view tosmall and large requirements at competitive prices.Our primary operation is the manufacture of PipeFlanges to meet all International standards, withspecific emphasis on the following products:-

A.N.S.I/A.S.A. Flanges High Pressure (e.g.600lb, 900lb, 1500lb, 2500lb)

Swivel Ring Flanges

Anchor Flanges

.. and Flanges manufactured to customersspecific designs.

Orifice Flanges

In conjunction with our British Gas plc approval forthe supply of Flanges up to 900 mm n.b. we havesupplied Flanges for use on the following projects:-

Emerald Field Development Ali BabaConversion

Electrical Switchgear Development (G.E.C.)

Petrobel Ras Garra Oilfield Egypt

B.P. Miller Development (for H & G)Agip T Block Gas

McDermott E.T.P.M. (Inc.) Dubai

Swivel Ring Flanges

FLANGES

Standard Size Rating Type

1 de 13


2/13

ANSI B16.5 1.5''/24'' 150/2500 WN / SO / BL

MSS SP 44Upto 72"/60"

Upto 60"/48"

150/300

600/900WN / BL

API605 Upto 90"/60'' 75/300 WN / BL

ASME B 16.47 Upto90"/60" 75/900 WN / BL

AWWA Upto 72" Class B,D& E Ring Type

BS3293 Upto 72" 150 WN / SO / BL

BS3293 Upto 60'' 300/600 WN / SO / BL

DIN Upto 72" 6Kg/2500Kg WN / SO / BL

API 590/ASME B16.48 Upto 72" 150 to 2500 Spec Blinds & Rings

RINGS / GIRTH FLANGES ETC.:

CARBON STEEL:Maximum Outside Diameter : 2300mmMaximum Thickness : 400mmMaximum Weight : 5.5tonnes

ALLOY STEEL:Maximum Outside Diameter : 1900mmMaximum Thickness : 350mmMaximum Weight : 4.0tonnes

STAINLESS STEEL:Maximum Outside Diameter :1900mmMaximum Thickness : 300mmMaximum Weight : 4.0tonnes

TUBE SHEETS / COVERS & BLANKS ETC. :

CARBON STEEL:Maximum Outside Diameter : 2200 mmMaximum Thickness : 350 mmMaximum Weight : 5.0 tonne

ALLOY STEEL:Maximum Outside Diameter : 1750 mmMaximum Thickness : 180 mmMaximum Weight : 2.5 tonne

STAINLESS STEEL:Maximum Outside Diameter :1750 mmMaximum Thickness : 180 mmMaximum Weight : 2.5 tonne

NOTE : Finish & Forge weights are mostimportant factors, we can do higher thickness &larger outside diameters also, but keeping inmind the maximum weight to be handledBesides the above products we can supplyflanges to API 6 B, Long Weld Neck Flanges asper Taylor Forge, Tema Flanges, Oriface Flanges,

2 de 13


3/13

Spectacle Blinds, Drip Rings, Spacer Blinds,Forged Fittings, Forged Valves, High TensileFastenersand other related products . We alsomanufacture closed die forged auto productsand various other customer specified products

as per customer specification etc.

MATERIAL

PSW caters to the following material and more asper customer specifications

C.S : ASTM A105 , A181 GR 60/70 ,A694 F52/60 ,

SA266 CLII and III , NACE (HIC+ SSC) etc.

LTCS : ASTM SA 350 LF1, LF2, LF3and LF6 etc.

A.S : ASTM A182 F1, F5, F6 , F9 ,F11 , F12 , F22

and F91 etc.

S.S : ASTM A182 F304(H&L) ,

F310, F316(H&L) F316 Ti,F317 (L), F321(H) and

F347(H) etc

DUPLEX S.S : ASTM A182 F44 and F51

EXOTIC : MONEL 400 and 500

MaterialSpecifications:

Carbon Steel : ASTM A-36, A-285, A-287 or equal.

Stainless Steel : ASTM A-240, Grade 304,304L, 316 and 316L.

Size :

3 de 13


4/13

Carbon Steel : 1" through 96", Thickness3/8" through 4.50".

Stainless Steel : 1" through 96", Thickness3/8" through 2".

Dimensional Specifications :

ANSI, API, MSS, AWWA, DIN, JIS, ISO, Metric and as per

client's drawings and specifications.

Material Specifications:

ASTM A-105

ASTM A-694, Grade F56 & F60 (High Yield)

ASTM A-182, Grade 304, 304L, 316, 316L

ASTM A-182, Grade F5, F11 & F 22 (HighTemperature)

ASTM A-350, Grade LF1 & LF2 (LowTemperature)

Size :14" through 42" ASTM A-105

1/2" through 42" all other specifications

Type :

Slip-On, Welding Neck, Screwed, Lap-Joints, RTJ and Blind.


ANSI B16.5, MSS, DIN, MSS, API and as perclients's specifications.

4 de 13


5/13


ASTM A-351, A-216 Grade WCB, A-27, A-732 or equal

Size :

2" through 60"

Dimensional Specifications :As per client's specifications

Material Specifications :

ASTM A-36, A-283, A-285, A-105 CastCarbon Steel or equal

Sizes :

1" through 96", Thickness 1/2" through4.50 " Plate Steel.

2" through 60" Cast Carbon Steel.

1/2" to 42" Forged Carbon Steel.

Galvanization :

As per all applicable ASTM Standards orclient's requirements.

Type :

Slip-On, Blind, Weld-Neck, RTJ, Lap-Joints,Split-Type etc.


5 de 13


6/13

AWWA A-207, ANSI B16.5, API, DIN etc. and asper client's specifications.

PLATE STEEL FLANGES

Plate Steel Flanges are available in following material and dimensionalspecifications.

MaterialSpecifications:

Carbon Steel : ASTM A-36, A-285, A-287 or

equal.

Stainless Steel : ASTM A-240, Grade 304,304L, 316 and 316L.

Size :

Carbon Steel : 1" through 96", Thickness3/8" through 4.25".

Stainless Steel : 1" through 96", Thickness

3/8" through 2".


ANSI, API, MSS, AWWA, DIN, JIS, ISO,Metric and as per

client's drawings and specifications.

Forged Steel Flanges are available in following material and dimensionalspecifications.


ASTM A-105

6 de 13


7/13

ASTM A-694, Grade F56 & F60 (High Yield)

ASTM A-182, Grade 304, 304L, 316, 316L

ASTM A-182, Grade F5, F11 & F 22 (High

Temperature)

ASTM A-350, Grade LF1 & LF2 (LowTemperature)

Size :

14" through 42" ASTM A-105

1/2" through 42" all other specifications

Type :

Slip-On, Welding Neck, Screwed, Lap-Joints, RTJ and Blind.


ANSI B16.5, MSS, DIN, MSS, API and as perclients's specifications.

CAST STEEL FLANGES

Cast Steel Flanges are available in following material and dimensionalspecifications.


ASTM A-351, A-216 Grade WCB, or equal

Size :

2" through 60"


As per client's specifications

GALVANIZED FLANGES

7 de 13


8/13

Galvanized flanges are available in following material and dimensionspecifications.

Material Specifications :

ASTM A-36, A-283, A-285, A-105 Cast

Carbon Steel or equal

Sizes :

1" through 144", Thickness 1/2" through4.50 " Plate Steel.

2" through 60" Cast Carbon Steel.

1/2" to 42" Forged Carbon Steel.

Galvanization :

As per all applicable ASTM Standards orclient's requirements.

Type :

Slip-On, Blind, Weld-Neck, RTJ, Lap-Joints,Split-Type etc.


AWWA A-207, ANSI B16.5, API, DIN etc. and asper client's specifications.

RETAINING RINGS

8 de 13


9/13

These Retaining Rings are used by the manufacturers of RubberExpansion Joints. Following are the dimensions and specifications ofrings which we manufacture, if your specification are different thanour's, please let us know we can also manufacture rings as perclients's specifications.

Specifications

Material : Carbon Steel as per ASTM A-36 or equal.Stainless Steel as per ASTM A-240.

Finsh : Carbon Steel Rings can be Hot DippedGalvanized or Zinc Plated.

Partition : Rings from 0.5" to 24" are in two parts andabove 24" are in four parts.

Thickness : Nominal thickness of rings is 3/8".

Origin : India.

Dimensions of Split Type Retaining Rings

SIZE(Inch)

Inside Dia(A)

Outside Dia.(B)

Bolt Circle(C)

No. Of Holes(D)

Dia. Of Holes(E)

Weightlbs

0.50 1 1/4" 3 1/2" 2 3/8" 4 5/8" 0.77

9 de 13


10/13

0.75 1 5/8 3 7/8 2 3/4 4 5/8 0.91

1 1 7/8 4 1/4 3 1/8 4 5/8 1.09

1.25 2 1/8 4 5/8 3 1/2 4 5/8 1.29

1.50 2 3/8 5 3 7/8 4 5/8 1.50

2 3 1/8 6 4 3/4 4 3/4 2.02

2.5 4 1/8 7 5 1/2 4 3/4 2.20

3 4 5/8 7 1/2 6 4 3/4 2.50

4 5 7/8 9 7 1/2 8 3/4 2.74

5 6 7/8 10 8 1/2 8 7/8 3.64

6 7 7/8 11 9 1/2 8 7/8 3.93

8 9 7/8 13 1/2 11 3/4 8 7/8 4.45

10 12 1/8 16 14 1/4 12 1 6.62

12 14 1/2 19 17 12 1 8.17

14 16 1/2 21 18 3/4 12 1 1/8 11.68

16 18 1/2 23 1/2 21 1/4 16 1 1/8 12.93

18 20 1/2 25 22 3/4 16 1 1/4 15.9820 22 5/8 27 1/2 25 20 1 1/4 17.95

22 24 5/8 29 1/2 27 1/4 20 1 3/8 19.04

24 26 5/8 32 29 1/2 20 1 3/8 23.37

26 28 7/8 34 1/4 31 3/4 24 1 3/8 24.76

30 32 7/8 38 3/4 36 28 1 5/8 26.21

32 35 1/4 41 3/4 38 1/2 28 1 5/8 35.94

36 39 46 42 3/4 32 1 5/8 43.00

38 41 48 3/4 45 1/4 32 1 5/8 51.46

40 43 50 3/4 47 1/4 36 1 5/8 53.19

42 45 1/4 53 49 1/2 36 1 5/8 56.1344 47 1/4 55 1/4 51 3/4 40 1 5/8 60.17

48 51 1/4 59 1/2 56 44 1 5/8 67.21

50 53 1/4 61 3/4 58 1/4 44 1 7/8 69.32

54 57 1/4 66 1/4 62 3/4 44 1 7/8 80.62

58 61 1/4 71 67 1/4 48 1 7/8 94.38

60 63 1/4 73 69 1/4 52 1 7/8 96.47

62 65 1/4 75 3/4 71 3/4 52 2 107.20

66 69 1/4 80 76 52 2 117.65

72 75 1/4 86 1/2 82 1/2 60 2 133.03

78 81 1/4 93 89 64 2 1/8 148.16

84 87 1/2 99 3/4 95 1/2 64 2 1/8 168.82

90 94 1/2 106 1/2 102 1/4 68 2 1/8 191.29

96 100 1/2 113 1/2 108 1/2 68 2 1/2 216.59

CONTROL ROT ASSEMBLIES

10 de 13


11/13

Control Rod Assemblies are used for Rubber Expansion Joints.Assemblies are available in carbon and stainless steel. Assemblies can bemanufactured as per client's drawings.

Each assembly is consists of :

Two Gusset PlatesOne RodTwo Hexgonal nuts

Two Steel Washers.

DIMENSIONS OF ROD AND GUSSET PLATES FOR CONTROL RODASSEMBLIES

SizeInsideRad

RadInnerB.C.

RadOuterB.C.

RadAtFlg.Bolt

RadAtRod

Thick

FlangeBoltHoleDia.

RodHoleDia

RodDia.

RodLength

SteelWasherStd.

Inch (A) (B) (C) (F) (R) (H) (D) (E) (J) (L) Bolt Size

1.5" 1 7/16115/16

3 1/8 1/2 3/4 1/4 5/8 5/8 1/2 11 1/2 1/2

2" 1 3/4 2 3/8 3 5/8 5/8 7/8 3/8 3/4 3/4 5/8 12 5/8

11 de 13


12/13

2.5" 2 2 3/4 4 1/8 3/4 7/8 3/8 3/4 3/4 5/8 12 5/8

3" 2 1/4 3 4 3/8 3/4 7/8 3/8 3/4 3/4 5/8 15 1/2 5/8

4" 2 3/4 3 3/4 5 1/8 1 1 3/8 3/5 3/4 5/8 15 1/2 5/8

5" 3 1/4 4 1/4 5 3/4 1 1 3/8 7/8 3/4 5/8 15 1/2 5/8

6" 3 3/4 4 3/4 6 1/4 1 1 1/2 7/8 3/4 5/8 16 5/8

8" 4 7/8 5 7/8 7 1/2 1 1 1/2 7/8 7/8 3/4 16 1/2 3/4

10" 6 7 1/8 8 3/4 1 1/8 1 1/8 3/4 1 1 7/8 20 7/8

12" 7 1/8 8 1/2 10 1/4 1 3/8 1 3/8 3/4 1 1 1/8 1 21 1

14" 8 1/8 9 3/8115/16

1 1/4 1 1/4 3/4 1 1/8 1 1/8 1 18 1

16" 9 1/4 10 5/8129/16

1 3/8 1 3/8 3/4 1 1/8 1 1/4 1 1/8 18 1/2 1 1/8

18" 10 1/8 11 3/8 13 3/8 1 1/4 1 3/8 3/4 1 1/4 1 1/4 1 1/8 18 1/2 1 1/8

20" 11 1/4 12 1/2 14 5/8 1 1/4 1 3/8 3/4 1 1/4 1 1/4 1 1/8 18 1/2 1 1/8

22" 12 1/4 13 5/81511/16

1 3/8 1 1/2 1 1 3/8 1 3/8 1 1/4 21 1/2 1 1/4

24" 13 1/4 14 3/4 17 1 1/2 1 1/2 1 1 3/8 1 3/8 1 1/4 21 1/2 1 1/4

26" 14 3/8 15 7/8 18 1/8 1 1/2 1 1/2 1 1 3/8 1 3/8 1 1/4 21 1/2 1 1/4

28" 15 3/8 17 19 1/4 1 5/8 1 5/8 1 1/4 1 3/8 1 1/2 1 3/8 22 1 3/8

30" 16 3/8 18 20 3/8 1 5/8 1 3/4 1 1/4 1 3/8 1 5/8 1 1/2 22 1/2 1 1/2

34" 18 3/8 20 1/4231/16

1 7/8 1 7/8 1 1/2 1 5/8 1 3/4 1 5/8 24 1 5/8

36" 19 3/8 21 3/8

24

3/16 2 2 1 1/2 1 5/8 1 7/8 1 3/4 24 1/2 1 3/4

40" 21 5/8 23 5/8 26 5/8 2 2 1 1/2 1 5/8 1 5/8 1 1/2 24 1 1/2

42" 22 3/4 24 3/42711/16

2 2 1 1/2 1 5/8 1 3/4 1 5/8 26 1/2 1 5/8

44" 23 7/8 25 7/8 28 7/8 2 2 1 1/2 1 5/8 1 3/4 1 5/8 26 1/2 1 5/8

48" 26 283015/16

2 2 1 1/2 1 5/8 1 7/8 1 3/4 27 1 3/4

50" 27 29 1/8323/16

2 1/8 2 1/8 1 1/2 1 5/8 1 7/8 1 3/4 27 1 3/4

54" 29 1/8 31 3/8 34 5/8 2 1/4 2 1/4 1 1/2 2 2 1/8 2 28 1/2 2

56" 30 1/4 32 1/2 35 7/8 2 1/4 2 1/4 1 1/2 2 2 1/8 2 28 1/2 2

60" 32 3/8 34 5/8 38 2 1/4 2 1/4 1 3/4 2 2 1/8 2 29 1/2 2

62" 33 1/2 35 7/8 39 3/8 2 3/8 2 3/8 1 3/4 2 2 1/8 2 29 1/2 2

66" 35 1/2 38 41 1/2 2 1/2 2 3/8 1 7/8 2 2 1/8 2 30 2

72" 38 1/2 41 1/4 44 3/4 2 3/4 2 3/8 1 7/8 2 2 1/8 2 30 2

78" 41 1/2 44 3/8 48 2 7/8 2 1/2 2 2 1/4 2 3/8 2 1/4 32 1/2 2 1/4

12 de 13


13/13

1/16

84" 45 1/2 47 3/4 51 3/4 2 1/4 2 3/8 2 1/4 2 1/4 2 1/2 2 1/4 32 1/2 2 1/4

90" 48 7/8 51 1/8 55 3/4 2 1/4 2 1/2 2 1/2 2 1/8 2 3/8 2 1/2 34 2 1/2

96" 51 7/8 54 1/4 59 1/4 2 3/8 2 5/8 2 1/2 2 1/2 3 2 3/4 35 2 3/4

13 de 13

bridas industriales

Documents

Transcript of bridas industriales