www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 1 of 12

Engine Compartment:

70080 Remote Oil Filter Hose Kit, Braided Stainless

This kit connects the remote oil filter to the engine block adapter for cars with shorty headers which require remote oil filters. The ½” ID smooth bore Teflon lined hose and internally chamfered 7/16” ID fittings maximize oil flow.

$83.00

Straight brass fittings (one swivel) are machine crimped onto the pre-cut 1,750 psi rated hose for easy installation and worry-free operation. Loctite® PST Teflon thread sealant is provided to ensure a leak-free connection to the oil filter adapters. Made in USA.

35169 90° Rotating Billet Aluminum Remote Oil Filter Adapter $69.00

By Canton Racing Products, black anodized. This high quality adaptor can be fastened with any hose orientation. Made in USA.

35170 Billet Aluminum Remote Oil Filter Mount $98.00

By Canton Racing Products, black anodized, Made in USA.

35107 90° Oil Filter Adapter Kit, M-6880 A50 $72.00

For cars with shorty headers. Requires short filter 31160 (see below) when used with carbureted application using a mechanical fuel pump

31160 Short Oil Filter $7.00

For use with 90° Oil Filter Adapter Kit and mechanical fuel pump.

K060380 Serpentine Belt

6 Rib, 38", for stock Mustang 5.0 crank and water pump pulleys with driver side alternator $25.00

32013 Intake Manifold Bolt Kit, ARP, Hex Stainless $34.99

20178 Plug, 5/8-11, Stainless Steel, For Cylinder Head Air Injection

Port $2.00

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 2 of 12

Engine Compartment: (continued)

70544 Alternator Bracket Kit, Driver Side

Great for use with centrifugal superchargers. Works in a 3-pulley setup with grooved water pump pulley and CW rotation water pump, or with smooth pulley and a CCW (reverse rotation) water pump. Includes laser-cut stainless bracket and all necessary fasteners. Made in USA.

$129.00

35148 Engine Mount Set, Energy Suspension, Black, Polyurethane $129.00

Requires engine mount to engine and engine mount to frame fasteners. See EzePak Fasten Driveline (71018)

30003 Nut, 14mm Flanged Self Locking for Engine Mount to Frame $4.25

2 required per car, 2 shown in photo, price is each.

K060529 Serpentine Belt, 6 rib, 52.9” $25.00

For use with 302 engines with Breeze power steering, alternator brackets, and OEM pulleys

20148 Bolt, 7/16-14x1” Hex Head, Grade 8 for engine mount to

engine (4 per car) $.50

20145 Washer, Split Lock, 7/16”, for use with 20148 $.10

70640 Serpentine Pulley Kit, Crank and Water Pump for Small Block Ford, for use with Hi-Po Damper. Made in USA.

Diameters are the same as OEM Mustang 5.0 to provide water pump speed needed for cooling. Crank pulley is designed so spacer is not required for use with the SFI Balancer supplied with Ford Racing M-6007-XEFMS and Boss 302 engines. Includes fasteners.

Also available separately: For the water pump pulley only, order #70638, and for the crank pulley only, order #70639.

$229.00

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 3 of 12

Engine Compartment: (continued)

70601 Passenger Side Power Steering Pump Bracket Kit

This Breeze exclusive bracket mounts GM style power steering pumps to the passenger side cylinder head and fits both 302 and 351 Windsor based engines. Fore/Aft position matches OEM 5.0 serpentine pulleys.

$89.00

Two fixed mounting positions are possible to accommodate slightly different belt lengths. Does not include provision for tensioning the belt. Includes 1/4" thick stainless steel mounting plate, aluminum spacers and grade-8 mounting bolts. Fasteners for the pump itself are not included since pump fastener requirements vary. Made in USA.

70608 Driver Side Power Steering Pump Bracket Kit

This Breeze exclusive bracket mounts GM style power steering pumps to the driver side cylinder head and fits both 302 and 351 Windsor based engines. Has the same specifications as 70601 above.

$89.00

70510 Power Steering Pump Kit, Low Flow, 10AN Inlet 06AN Outlet, Serpentine Pulley

Power Steering Pump Kit, GM style, Low Flow for use with rack and pinion steering, 06AN supply and 10AN return fittings with black anodized sepentine pulley installed. Includes fasteners for use with Breeze #70601 bracket kit. Requires remote reservoir. Recommended for use on the passenger side

$249.00

3909 Seal, Engine Rear Crankshaft Main $14.95

2692 Seal, Engine Front Crankshaft (timing cover) $9.95

35197 M-8510-B351 Crank Pulley Spacer $28.95

Used to properly position the crank pulley when used with high performance harmonic balancer.

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 4 of 12

Engine Compartment: (continued)

35041 Oil Pan, Rear Sump, 302, Autocross/Road Race

Made for Breeze by Canton in USA, this feature packed pan is specifically designed so nothing extends below the frame.

$325.00

Uses stock 5.0 dipstick and pickup. Has a magnetic drain plug located in the side wall. Rear sump trap door allows oil to flow into sump during acceleration and keeps it there during braking. Rear lip keeps oil in the sump under hard acceleration. Passenger side internal rib reduces oil slinging up into block. Includes windage tray. Side mounted 3/8 NPT bung for oil temperature sender. Three additional trap doors and baffling keep the pickup submerged during hard cornering. For pan gasket see 31146. For mechanical oil temp sender adapter, see 32125 in Instrumentation section.

35157 Oil Pump Pickup Tube, 302

Needed for use with main cap girdles other than Ford Racing or DSS ($30 up-charge when purchased with oil pan) Note: expect some modification to girdle or pickup tube mounting tab to fit your specific combination.

$60.00

30232 Oil Pickup, 5.0, OEM Ford $39.00

31146 Gasket, Oil Pan, 302, 1 Piece, Fel-Pro $29.00

70583 Dipstick and Tube Assembly, 302, OEM Ford

$40.00

70573 Oil Pan Kit, Rear Sump, 351, Street/Strip

Made for Breeze by Canton in USA, this feature packed pan is specifically designed so nothing extends below the frame.

$351.00

It is a rear sump unit, so the oil stays at the pickup under acceleration, and it has a baffle and trap door to keep the oil in the sump while braking. It also includes a built-in windage tray, a custom oil pump pickup tube with gasket, and pan mounted dipstick/tube. It is 7-1/2” deep with a side mounted magnetic drain plug. The pan also has a crank scraper and a 3/8” NPT bung for connecting an oil temperature sender. A special oil pump pickup tube, #35158 is available to fit engines with a main cap girdle other than those supplied by Ford Racing and DSS. 8+ quart capacity. For pan gasket, see 31147 on the next page.

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 5 of 12

Engine Compartment: (continued)

35158 Oil Pump Pickup Tube, 351

For use with main cap girdles other than Ford Racing or DSS ($30 up-charge when purchased with oil pan) Note: If your girdle is not notched to accept the pickup tube mounting tab, the mounting tab will need to be modified.

$60.00

31147 Gasket, Oil Pan, 351, 1 Piece, Fel-Pro $34.00

30211 Oil Filter, Motorcraft FL1A $5.00

32009 Oil Pan Bolt Kit, ARP, Hex Stainless $26.99

31152 Timing Cover for 302/351 Ford without pump boss, for reverse rotation water pump

Requires Front Crank Seal #2692 $89.00

31134 Timing Cover for 302/351 Ford with mechanical fuel pump boss, bare $89.00

Requires front crank seal #2692 clockwise rotation water pump.

70605 Fuel Pump Block Off Plate Kit $8.95

Ford Racing, chrome, with stainless steel fasteners.

31139 Mechanical Fuel Pump Eccentric Kit, Small Block Ford

Also known as an engine finishing kit. Includes head and timing cover dowels, balancer Woodruff keys.

$19.00

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 6 of 12

Engine Compartment: (continued)

30117 Mid-plate (goes between the engine and the bell-housing) (Ford list is $55.68) $54.00

70536 Thermostat Housing Fastener Kit $4.50

Includes all stainless steel hex head bolts (different lengths), AN washers, and split lock washers

21502 Fitting, Oil Pressure Sender Adapter $4.50

This is a brass 45 degree street elbow that allows clearance for sender.

70508 FE Valve Cover Adapter Kit

This ingenious kit from Rupert Hartmann allows you to install FE Big Block valve covers on your carbureted small block engine! Instant brawny shoulders. This high quality kit includes billet aluminum adaptor plates, 1/4-20 mounting hardware and reinforced small block valve cover gaskets. You supply the FE valve covers (cast aluminum or stamped steel) and breather cap, gaskets (see #31118 below), and valve cover nuts (see #70543 below). Made in USA.

$149.00

31118 Gasket Set, Valve Cover, FE, Rubber $19.00

70543 Nut Kit for FE Valve Cover Adapters $22.50

Includes 10 chrome tall hex acorn nuts with Ford logo

32096 M-6892-F Valve Cover Grommet Set $4.50

Includes 1 each replacement grommet for PCV valve and push-in oil fill cap.

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 7 of 12

Engine Compartment: (continued)

32010 Carburetor Stud Kit, ARP, Hex Stainless $21.99

32026 M-12270-A302 Distributor Hold Down $7.95

Use with recommended screw and washer (70600) below.

70600 Screw and Washer for Distributor Hold Down

Stainless steel, recommended over the chrome plated screw that comes with the 32026 Hold Down. $3.00

32011 Distributor Stud Kit, ARP, 12 point Stainless $6.99

30217 Throttle Cable, OEM Ford F-150 $75.00

This cable has a built-in return spring and was the stock throttle cable supplied with the FFR Roadster kit until their change to a universal cable. Preferred for use with Massflo EFI Systems. (Ford List = $85.26)

70636 Adapter Bracket Kit, F-150 Throttle Cable to FFR Gas Pedal $10.00

This bracket replaces the ball stud and enables connection of the OEM Ford F-150 Throttle Cable (#30127) to the gas pedal supplied by Factory Five Racing with their complete kits. Bracket and hardware are stainless steel.

35302 M-6007-XEFMS Ford Racing 302 Crate Engine Assembly

Includes GT-40 Aluminum Heads, Mahle Forged Pistons, Forged Connecting Rods and Crankshaft, Hi-Po SFI Approved Harmonic Damper and SFI Billet Steel Flywheel with dowel pins, ARP Cylinder Head Bolts, 340 HP @ 5,500 rpm, peak torque @ 2,500 rpm. We recommend using the 35041 oil pan with this engine.

$5,095.00

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 8 of 12

Engine Compartment: (continued)

35264 M-6007-X302 Ford Racing Boss 302 Crate Engine Assembly

Includes 4-bolt Main Boss Block, GT-40 Aluminum Heads, Mahle Forged Pistons, Forged Connecting Rods and Crankshaft, Hi-Po SFI Approved Harmonic Damper and SFI Billet Steel Flywheel with dowel pins, ARP Cylinder Head Bolts, 340 HP @ 5,500 rpm, peak torque @ 2,500 rpm. We recommend using the 35041 oil pan with this engine.

$6,495.00

35222 Filtered Breather, Screw-In for EFI Style Valve Covers, K&N, Made in USA

For use on M-6007-XEFMS engines.

$19.00

70603 Inline PCV Valve Kit for EFI Covers

This kit allows you to use the EFI valve covers supplied on the Ford Racing XE3M and XEFM engines with a carburetor or MassFlo EFI. Requires 35222 Breather (see above).

$15.00

35220 Seals-It Grommet Seal 4” OD

Blank rubber grommet is molded onto a clear anodized aluminum mounting ring. You punch an appropriately sized hole to accept your wire or hose bundle. Rubber stretches to accommodate bulky connectors or hose ends. See #21092 in Tools & Supplies for Hollow Punch Kit.

$24.00

32058 M-12390-B Distributor Gear, Steel, .467” ID

We ream the ID to ensure minimum .466” ID. $45.00

32028 M-12044-A2 Coil Bracket, Chrome Plated Steel

$7.95

21079 Permatex Ultra Black Gasket Maker $5.39

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 9 of 12

Engine Compartment: (continued)

32016 Weiand Stealth Intake for 302.

Intake Manifold, Dual Plane for 302, Weiand Stealth #8020. Port size is 1.025" × 1.80". 4.6" deck to carb surface in front, 5.25" in rear (4 degree angle). See also #32013 Bolt Kit, #35219 Gasket Set, and #21079 Gasket Maker. This is the intake we supply with EzePak Master Carbureted Kits.

$169.00

35219 Gasket Set, Intake Manifold, for GT-40 Heads

Fel-Pro 1262-S3, fits any head including large race ports. Printoseal .065” thick. Port size 1.28” X 2.10”. W/O exhaust gas crossover port.

$29.00

32024 M-9439-A50 Gasket Set, Intake Manifold

M-9439-A50 Intake Manifold Gasket Set for 302/351. For GT-40 heads with or without EGR. .070" thick. Port size 1.28 X 2.18".

$33.00

32057 M-6582-B Big Block Valve Cover Set

Ford Racing, Black Finned "Cobra LeMans", Big Block. Can be installed on Windsor Small Block Heads with these additional items: 70508 FE Valve Cover Adapter Kit 31118 Gasket Set, Valve Cover, FE, Rubber

Get the big-block look without all the additional weight and expense!

$159.00

32023 M-6582-F302 Valve Cover Set, "Cobra"

M-6582-F302 Valve Cover Set, Black, "Cobra" Outline Letter for Small Block Ford. This is a carbureted style valve cover. Includes chrome vented fill cap with grommet and PCV valve grommet. Requires PCV valve and hose and gaskets.

Note: Oil Full tube can be shortened.

$115.00

31161 Gasket Set, 302/351 Rubber

Comes with tabs for use with sheet-metal valve covers. Tabs are easily trimmed for use with cast aluminum valve covers.

$20.00

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 10 of 12

Engine Compartment: (continued)

32045 M-9430-P51 Shorty Headers, Stainless Steel, Jet Hot

Ford Racing M-9430-P51 Stainless Steel Shorty Headers with Jet-Hot® Ceramic Coating, 1-5/8" Tube OD, Non-Equal Length. Includes Gaskets and standard header bolts. We recommend 1" Stage-8 Self Locking Header Bolt Kit for use with these headers. (Breeze #32053)

$369.00

35223 Holley 570CFM Street Avenger Carburetor $365.00

Carburetor, Holley Street Avenger, 570CFM, Vacuum Secondaries, Electric Choke

32015 Holley 670CFM Street Avenger Carburetor $369.00

Carburetor, Holley Street Avenger, 670CFM, Vacuum Secondaries, Electric Choke

32017 Chrome Fuel Inlet “Y”

$21.00

35068 Throttle Cable Kit, 36” Braided Stainless, Lokar 1000HT36 $50.00

35069 Throttle Cable Bracket/Spring Kit, Stainless Steel, Lokar 4000 $28.00

For carbureted applications. Recommend linkage on passenger side.

32019 Fuel Pump, Mechanical, Holley 110 GPH, 3/8” NPT Inlet/outlet $91.00

70596 Mechanical Fuel Pump Fastener Kit

Includes all stainless steel hex head bolts, AN washers, and split lock washers.

$5.00

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 11 of 12

Engine Compartment: (continued)

32018 Fuel Filter, Chrome, Holley, 3/8" Barbed Inlet/outlet, Chrome

$12.00

Spark Plug Wire Kit, Taylor Vertex with Separators and Brackets

This is the way to go if you would like your spark plug wires all neat and tidy. The distributor ends come un-attached so you cut the wires to the exact length needed for your application.

$95.00

This takes more time than installing a pre-terminated set but the results are well worth the effort. Includes ends for both socket and post style distributor caps. The separator brackets come with stainless steel socket head cap screws that mount in place of your existing valve cover screws. Wires are made in USA. Requires a spark plug wire crimping tool for installation. If you don't have one, Breeze will loan a ratcheting crimp tool for only the cost of shipping. Available in black only.

32042 M-12259-M301 Black Spark Plug Wire Set, 9mm $46.95

32029 M-12259-R301 Red Spark Plug Wire Set, 9mm $46.95

35212 M-12259-C301 Blue Spark Plug Wire Set, 9mm $46.95

35275 M-12259-M302 Black Spark Plug Wire Set, Universal

This set allows you to custom fit the wires by trimming to length and attaching the distributor post terminal end. Requires customer supplied wire crimping tool.

$46.95

35274 M-12259-C302 Blue Spark Plug Wire Set, Universal

This set allows you to custom fit the wires by trimming to length and attaching the distributor post terminal end. Requires customer supplied wire crimping tool.

$46.95

www.breezeautomotive.com Call 508 533-6455 for product recommendations and to place your order!

Breeze Resource Guide and Price List rev. 57 printed 09/24/09, Page 12 of 12

Engine Compartment: (continued)

32031 M-12297-M03 Spark Plug Wire Divider, Three Wires, Black (pk of 4) $6.25

32032 M-12297-M04 Spark Plug Wire Divider, Four Wires, Black (pk of 4) $6.50

35299 Gasket Set, Exhaust Manifold, Cometic, Small Block Ford $38.00

32014 M-9600-C302 Single Oval Air Cleaner

M-9600-C302 Single Oval Air Cleaner, Black, Finned, "Cobra" outline letter. Filter is 1-3/4" tall. Cast aluminum top, steel base.

$94.00

32049 Tall K&N Air Filter Element for Cobra Oval Air Cleaner

This K&N filter element fits the #32014 Ford Racing M-9600-C302 Oval Air Cleaner. The overall height of the element is 3" and the open element height is 2". This compares to the stock filter height of 1-3/4" and an open element height of 1-3/16".

$75.00

This creates the headroom to install the Mass-Flo mass air meter inside the air cleaner. This element will fit under the hood of the 302 powered FFR Roadster with most intakes. Will not fit with 351 based engines.

35253 Air Cleaner, Oval, Polished Ball Milled Grooved Cast Aluminum

8.25" x 11.75" with 1.5" Tall Paper Element, for use with carburetors only.

$79.00

32054 Tall K&N Air Filter Element for Polished Oval Air Cleaner

This K&N Element is 4" tall and fits our #35253 Polished Aluminum Oval Air Cleaner. It only fits Roadsters with 302 based engines equipped with Mass-Flo EFI or 4 Barrel Carbureted with medium to low rise intakes. Breath EZE. This part number is for the filter element only.

$49.95