BOX-V2 - wtp.hoechsmann.com fileDesarrollo Industrial de Maquinaria Benicarló S.L. The information...
2
BOX-V 2 .0 Pneumatic press for drawer and door frames assembly This is a pneumatic press for a quick adjustment in order to assemble drawer and door frames with wide variety of dimensions. It studied and functional design will enable you assemble panels and strips nearly for each kind of joint (folding, past-througth, with dovetails and dowels), and it will enable you a perfect joint for each drawer and door frames. It particular lateral press mechanism, including it forward limited system, FLS, is especially useful when you are interested in not distorting folding joints or for a glass frames. Using precision lineal guides and moreover, it innovator lateral position press system, it will make possible you reductions in adjustement time and maintenance rates. Opciones Extras: * Kit DOOR (Pneumatic frontal press group made of four lockers that press the doors corners to assemble) Kit DOOR. Four lockers that press the doors corners to assemble. Detail of lowers press blocks that can positioned quickly at different heights. Lateral press ajustment to be used in the front part of drawers.
Transcript of BOX-V2 - wtp.hoechsmann.com fileDesarrollo Industrial de Maquinaria Benicarló S.L. The information...
BOX-V 2.0Pneumatic press for drawer and door frames assembly
This is a pneumatic press for a quick adjustment in order to assemble drawer and door frames with wide variety of dimensions.
It studied and functional design will enable you assemble panels and strips nearly for each kind of joint (folding, past-througth, with dovetails and dowels), and it will enable you a perfect joint for each drawer and door frames.
It particular lateral press mechanism, including it forward limited system, FLS, is especially useful when you are interested in not distorting foldingjoints or for a glass frames.
Using precision lineal guides and moreover, itinnovator lateral position press system, it will make possible you reductions in adjustement time and maintenance rates.
Opciones Extras:
* Kit DOOR (Pneumatic frontal press group made of four lockers that press the doors corners to assemble)
Kit DOOR. Four lockers that press the doors corners to assemble.
Detail of lowers press blocks that can positioned quickly at different heights.Lateral press ajustment
to be used in the front part of drawers.
BOX-V 2.0Pneumatic press for drawer and door frames assembly
This is a pneumatic press for a quick adjustment in order to assemble drawer and door frames with wide variety of dimensions.
It studied and functional design will enable you assemble panels and strips nearly for each kind of joint (folding, past-througth, with dovetails and dowels), and it will enable you a perfect joint for each drawer and door frames.
It particular lateral press mechanism, including it forward limited system, FLS, is especially useful when you are interested in not distorting foldingjoints or for a glass frames.
Using precision lineal guides and moreover, itinnovator lateral position press system, it will make possible you reductions in adjustement time and maintenance rates.
Opciones Extras:
* Kit DOOR (Pneumatic frontal press group made of four lockers that press the doors corners to assemble)
Kit DOOR. Four lockers that press the doors corners to assemble.
Detail of lowers press blocks that can positioned quickly at different heights.Lateral press ajustment
to be used in the front part of drawers.
L
H
W
PATENTED MODEL. Copyright 2009. Desarrollo Industrial de Maquinaria Benicarló S.L.The information contained in this document is subjected to change and is not binding.
DYNMA is a registered trademark by Desarrollo Industrial de Maquinaria Benicarló S.L.
Ctra. San Mateo, km. 2,4 Pol. Ind. Mercado de abastos, nave 1012580 Benicarló (Castellón) SpainTelephone: +34 964 470 156 Fax: +34 964 470 [email protected] www.dynma.es
Distributed by:
PRESS SPECIFICATIONS
Max. / min. length ( X ) 1.400 / 200 mm
Max. / min. height ( Y ) 800 / 210 mm
Max. / min. width ( Z ) 250 / 0 mm
Max. projected end ( V ) 35 mm
PRESS STRENGTH
Max. lateral strength ( Fx ) 800 kg
Max. vertical strength ( Fy ) 800 kg
PNEUMATIC CONECTION
Max. working pressure 6 bar
Consuption 5 Nl / min.
EXTERNAL DIMENSIONS / WEIGTH
Length x Height x Width ( L x H x W ) 2.500 x 2.170 x 800 mm
Weight 600 kg
BOX V 2.0 TECHNICALCHARACTERISTICS
L
H
W
PATENTED MODEL. Copyright 2009. Desarrollo Industrial de Maquinaria Benicarló S.L.The information contained in this document is subjected to change and is not binding.
DYNMA is a registered trademark by Desarrollo Industrial de Maquinaria Benicarló S.L.
Ctra. San Mateo, km. 2,4 Pol. Ind. Mercado de abastos, nave 1012580 Benicarló (Castellón) SpainTelephone: +34 964 470 156 Fax: +34 964 470 [email protected] www.dynma.es
Distributed by:
PRESS SPECIFICATIONS
Max. / min. length ( X ) 1.400 / 200 mm
Max. / min. height ( Y ) 800 / 210 mm
Max. / min. width ( Z ) 250 / 0 mm
Max. projected end ( V ) 35 mm
PRESS STRENGTH
Max. lateral strength ( Fx ) 800 kg
Max. vertical strength ( Fy ) 800 kg
PNEUMATIC CONECTION
Max. working pressure 6 bar
Consuption 5 Nl / min.
EXTERNAL DIMENSIONS / WEIGTH
Length x Height x Width ( L x H x W ) 2.500 x 2.170 x 800 mm
Weight 600 kg
BOX V 2.0 TECHNICALCHARACTERISTICS
![Rover - wtp.hoechsmann.com€¦ · m/min and acceleration from 3.5 to 5 m/sec² for high productivity. 8 Unique technological solutions XSQIIXTVSHYGXMZMX]ERH¥I\MFMPMX] requirements](https://static.fdocuments.us/doc/165x107/603916dd2e9428779f592d1a/rover-wtp-mmin-and-acceleration-from-35-to-5-msec-for-high-productivity.jpg)
