Bollhoff Helicoil Tangless Inserts 2
-
Upload
ace-industrial-supplies -
Category
Documents
-
view
213 -
download
2
description
Transcript of Bollhoff Helicoil Tangless Inserts 2
-
If you have always had to hunt for tangs
or stand on your head to find them
0150/01.02
Tangless
you can nowjump for joy:
For lo
west
price
s:
sales
@ac
einds
uppli
es.co
m
-
HELICOIL Tangless screw thread inserts
Example applications HELICOIL Tangless screw thread inserts
The extension of the proven product range.
The principle of insertion with thespecial HELICOIL Tanglessinsertion tool
free running SCREWLOCK
HELICOIL HELICOIL Replacement blade HELICOIL HELICOIL Replacement bladeTangless Tangless for HELICOIL Tangless Tangless for HELICOIL
free running SCREWLOCK Tangless free running SCREWLOCK Tanglessinsertion spindle insertion spindle insertion spindle extraction tool extraction tool extraction tool
M 02,5* 5160 232 5020 5160 232 5022 5160 232 5023 5180 302 5000 5180 302 5002 5180 302 5003M 03* 5160 230 3020 5160 230 3022 5160 230 3023 5180 300 3000 5180 300 3002 5180 300 3003M 04* 5160 230 4020 5160 230 4022 5160 230 4023 5180 300 4000 5180 300 4002 5180 300 4003M 05 5160 230 5020 5160 230 5022 5160 230 5023 5180 300 5000 5180 300 5002 5180 300 5003M 06 5160 230 6020 5160 230 6022 5160 230 6023 5180 300 6000 5180 300 6002 5180 300 6003M 08 5160 250 8020 5160 250 8022 5160 250 8023 5180 300 8000 5180 300 8002 5180 300 8003M 10 5160 251 0020 5160 251 0022 5160 251 0023 5180 301 0000 5180 301 0002 5180 300 1003M 12 5160 251 2020 5160 251 2022 5160 251 2023 5180 301 2000 5180 301 2002 5180 300 1203
Dimensions Insertion spindle for manual insertionand electric screwdriver
Tangless screw thread insert No tang break-off required No risk when drilling blind holes with low remaining wall thickness No need to remove tangs Reduced inspection work No risk due to tangs remaining in the component Working sequence shortened by dispensing with tang removal step Large parts do not have to be turned upside down
Insertion notch on both sides Bi-directional insertion No directional restriction Insertion notch at back acts as extraction notch and aligning notch Special HELICOIL Tangless extraction tools are provided for easy removal and
alignment of the thread inserts
Compatible with the HELICOIL plus system Same HELICOIL holding threads No change in design No need for new taps
Satisfies many international standards for material,characteristics, dimensions and function Material 1.4301 conforming to EN 10088-1 Material AISI 304 Complies with the following standards:
NAS 1130 and MIL-I-8846 When inserted, conforms
to DIN 8140
Cast aluminium gearboxhousing,HELICOIL TanglessM 12 x 24 free running,tang removal difficult dueto weight of workpiece.
3-phase servomotor withelectronic positioning
system: tangs remainingin the unit cause
malfunctions.
Cast aluminium supportfor mobile radio electro-nics, various dimensions
(M 3 and M 4).Problem: electronic
interference if loose tangsremain in place.
Cast aluminium gearboxhousing,HELICOIL TanglessM 5 x 10 free running,tang break-off problema-tic due to low remainingwall thickness of the blindholes.
Driver in front of theinsertion notch
Driver securely engaged* Manual insertion with the insertion spindle. For automated insertion we recommend the use of HELICOIL Tangless STRIPFEED with pre-stressing cartridge tools.
Because we now have Tangless thread inserts for you!
For lo
west
price
s:
sales
@ac
einds
uppli
es.co
m
-
HELICOIL Tangless screw thread inserts
d1
W
free running
d1
W
SCREWLOCK
For the uninstalled free running and SCREWLOCK thread inserts, the inspectedvalues are W and d1.The length is only measurable after the inserts have been inserted.
d = Nominal thread diameterP = Thread pitchd1 = Outer diameter of the thread insert before insertionW = Number of coils before insertionDHC = Outer diameter of the holding threadD1HC = Thread minor diameterB = Recommended twist drill diametert1 = Minimum depth of hole, see DIN 76 Part 1t2 = Nominal length of thread insert and minimum length of holding threadt5 = Distance of thread insert from the separating surface = 0.25 P,
if t2 corresponds to the above minimum value
Holding thread Assembly
If countersunk or burred:maximum countersinking diameter outerthread diameter DHC.
HELICOIL Tangless STRIPFEED (magazined)and imperial sizes UNC and UNF are availableon request.
All dimensions in mm. Subject to technical changewithout notice.
Dimen- t2 min HELICOIL HELICOIL
sions d1 d1 d1HC d1HC DHC Tangless TanglessP x d mm W min. max. min. max. B min. free running SCREWLOCK
M 2,5* 0,45 0,1 02,50 03,38 03,20 03,35 02,60 02,70 02,60 03,08 5130 025 0025 5132 025 00251,5 03,75 05,63 03,20 03,35 02,60 02,70 02,60 03,08 5130 025 0375 5130 025 03750,2 05,00 08,00 03,20 03,35 02,60 02,70 02,60 03,08 5130 025 0005 5132 025 00052,5 06,25 10,50 03,20 03,35 02,60 02,70 02,60 03,08 on request on request0,3 07,50 12,90 03,20 03,35 02,60 02,70 02,60 03,08 on request on request
M 3* 0,5 0,1 03,00 03,75 03,80 03,99 03,11 03,22 03,20 03,65 5130 003 0003 5132 003 00031,5 04,50 06,38 03,80 03,99 03,11 03,22 03,20 03,65 5130 003 0045 5132 003 00450,2 06,00 08,88 03,80 03,99 03,11 03,22 03,20 03,65 5130 003 0006 5132 003 00062,5 07,50 11,10 03,80 03,99 03,11 03,22 03,20 03,65 on request on request0,3 09,00 13,50 03,80 03,99 03,11 03,22 03,20 03,65 on request on request
M 4* 0,7 0,1 04,00 03,63 05,05 05,28 04,15 04,29 04,20 04,91 5130 004 0004 5132 004 00041,5 06,00 06,13 05,05 05,28 04,15 04,29 04,20 04,91 5130 004 0006 5132 004 00060,2 08,00 08,63 05,05 05,28 04,15 04,29 04,20 04,91 5130 004 0008 5132 004 00082,5 10,00 10,90 05,05 05,28 04,15 04,29 04,20 04,91 on request on request0,3 12,00 13,20 05,05 05,28 04,15 04,29 04,20 04,91 on request on request
M 5 0,8 0,1 05,00 04,13 06,20 06,50 05,17 05,33 05,20 06,04 5130 005 0005 5132 005 00051,5 07,50 06,88 06,20 06,50 05,17 05,33 05,20 06,04 5130 005 0075 5132 005 00750,2 10,00 09,63 06,20 06,50 05,17 05,33 05,20 06,04 5130 005 0010 5132 005 00102,5 12,50 12,30 06,20 06,50 05,17 05,33 05,20 06,04 on request on request0,3 15,00 14,80 06,20 06,50 05,17 05,33 05,20 06,04 on request on request
M 6 1,0 0,1 06,00 04,00 07,40 07,78 06,22 06,41 06,30 07,30 5130 006 0006 5132 006 00061,5 09,00 06,75 07,40 07,78 06,22 06,41 06,30 07,30 5130 006 0009 5132 006 00090,2 12,00 09,50 07,40 07,78 06,22 06,41 06,30 07,30 5130 006 0012 5132 006 00122,5 15,00 12,30 07,40 07,78 06,22 06,41 06,30 07,30 on request on request0,3 18,00 14,60 07,40 07,78 06,22 06,41 06,30 07,30 on request on request
M 8 1,25 0,1 08,00 04,50 09,80 10,18 08,27 08,48 08,40 09,62 5130 008 0008 5132 008 00081,5 12,00 07,38 09,80 10,18 08,27 08,48 08,40 09,62 5130 008 0012 5132 008 00120,2 16,00 10,25 09,80 10,18 08,27 08,48 08,40 09,62 5130 008 0016 5132 008 00162,5 20,00 13,50 09,80 10,18 08,27 08,48 08,40 09,62 on request on request0,3 24,00 16,40 09,80 10,18 08,27 08,48 08,40 09,62 on request on request
M 10 1,5 0,1 10,00 04,88 11,95 12,20 10,32 10,56 10,50 11,95 5130 010 0010 5132 010 00101,5 15,00 08,00 11,95 12,20 10,32 10,56 10,50 11,95 5130 010 0015 5132 010 00150,2 20,00 11,13 11,95 12,20 10,32 10,56 10,50 11,95 5130 010 0020 5132 010 00202,5 25,00 14,20 11,95 12,20 10,32 10,56 10,50 11,95 on request on request0,3 30,00 17,20 11,95 12,20 10,32 10,56 10,50 11,95 on request on request
M 12 1,75 0,1 12,00 04,90 14,40 14,80 12,38 12,64 12,50 14,27 5130 012 0012 5132 012 00121,5 18,00 08,13 14,40 14,80 12,38 12,64 12,50 14,27 5130 012 0018 5132 012 00180,2 24,00 11,35 14,40 14,80 12,38 12,64 12,50 14,27 5130 012 0024 5132 012 00242,5 30,00 14,70 14,40 14,80 12,38 12,64 12,50 14,27 on request on request0,3 36,00 18,00 14,40 14,80 12,38 12,64 12,50 14,27 on request on request
* Manual insertion with the insertion spindle. For automated insertion we recommend the use of HELICOIL Tangless STRIPFEED with pre-stressing cartridge tools.
Tang
less
Lic
ence
: KAT
O S
prin
wor
ks C
o/To
kyo
- Ja
pan
Ger
man
and
inte
rnat
iona
l pat
ents
S
ubje
ct t
o te
chni
cal c
hang
e P
rinte
d in
Ger
man
y R
eprin
ting,
eve
n in
ext
ract
form
, onl
y pe
rmitt
ed w
ith e
xpre
ss c
onse
nt.
Bllhoff GmbHFastening and assembly systems
Archimedesstrae 1 4 33649 Bielefeld Germany Phone +49 (0)5 21 / 44 82-03 (2 32)Fax +49 (0)5 21 / 4 48 23 71 Internet: www.boellhoff.de E-mail: [email protected]
For lo
west
price
s:
sales
@ac
einds
uppli
es.co
m