BODY COMPONENTS AND ATTACHMENTS FOR …...Add for off road mount kit 2006-2016 Ford 56" CA PN 184173...

of 41

Vendor Name: Crysteel Truck EquipmentContact Person: Jim WyattStreet Address: 1130 73rd Ave NEP.O. Box:

City, State, Zip Fridley, MN 55432Phone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

Version of Excel used: Microsoft Excel 2010

1.0 UTILITY /SERVICE BODYMake StahlWarranty 5 yearDate & I.D. of Price List 9/13/2017Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Wooster, Ohio 44691Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO

Shop Rate per HourShop Rate for Mechanical work $75.00Body Shop Rate $75.00

*Note: The "Discount to be Applied to Price List" must be a numeric Not listing a numeric percentage may result in your bid being rejected.

Furnish separate price quote for: BODY COMPONENTS AND ATTACHMENTS FOR 6,000 TO 19,500 GVWR

mailto:[email protected]

http://www.crysteeltruck.com/

of 41

Vendor Name: Crysteel Truck EquipmentContact Person: Jim WyattStreet Address: 1130 73rd Ave NEP.O. Box:City, State, Zip Fridley, MN 55432Phone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

State of Minnesota Pricing Page

## UTILITY / SERVICE BODY

Make Stahl Challenger Standard II 98" Model No. CST98VVS-48.5 PN20539356" Single rear wheel application39.5" high, 48-1/2" wide floor, 14" compartments, OA width 78.5"V- Style CompartmentsLock bolt construction of side packs to floor, floor understructure weldedAutomotive clip-on door seals in all compartmentGas shock door retainers on all full size vertical doors(2) adjustable trays w/dividers each front vertical compartment(1) adjustable tray with dividers for curb side horizontal(1) adjustable tray with dividers for each rear vertical compartment, 20 divider traysTwo point slam locking tailgateBolt on stainless steel concealed hinges, piano styleBolt on stainless steel (single point) T-handle latchesPainted one fleet color (no base coat clear coat paint included)Compartment interiors painted whiteUndercoating on bottom of floor & wheel wells

Price $5,965.35

Warranty 5 years

Date & I.D. of Price sheet N/A

Discount, if any, to be applied to price sheet N/A

Installation $980.02

Add for BC/CC paint on 98" bodies $396.61

Add for painting 134" bodies standard color $216.00


Add for undercoat on 134" bodies $58.43

Add for standard mount kit $117.09

Add for off road mount kit 2006-2016 Ford 56" CA PN 184173 $164.94

Add for off road mount kit 2017-Current Ford 56" CA PN 229344 $164.94



of 41

Add for off road spring mount kit PN'S 171630, 209578, 182896 $199.56

Add for off road spring mount kit PN'S 189546-60CA $79.42

Add for off road spring mount kit PN'S 189546-84CA $146.62

Add for adapter plugs Ford box delete PN 153738 $30.55

Add for adapter plug Ram PN 153739 $30.55

Add for adapter plug for GM 2016 or newer PN 225425 $30.55

Add for 98" body for Dual Rear Wheel $269.8256" CA, CST98VVD-52.5, PN 205783

Add for 110" body for Single Rear Wheel $448.0060" CA, CST110VVS-48.5, PN 205678

Add for 110" body for Dual Rear Wheel $702.5460" CA, CST110VVD-52.5, PN 205916

Add for 134" body for Dual Rear Wheel $1,924.3484" CA, CST134VVD-52.5, PN 206161(2nd vertical shelving same as front vertical)

Add for (8) compartment dome lights w/switch $619.05& mounting bracket, wiring harness, switch installed, CST82", CST98", & CST110" Bodies PN 206566

Add for (1) compartment dome lights w/switch $76.36& (1) mounting bracket installed. No wiring harness.CST82", CST98", & CST110" Bodies PN SPL

Add for Circle Punched Recessed Bumper 78 1/4" $377.89non-lighted PN 230165



Add for LED surface mount light kit installed $287.12Under 80" LED light kit PN 230523

Add for LED surface mount light kit installed $381.81Over 80" LED light kit PN 230522

Add for GM 60" & 84" supplemental mounting kit PN 208481 $135.42

Add for RAM 60" & 84" supplemental mounting kit PN 184502 $107.93

Add for Ford 60" & 84" supplemental mounting kit PN 228813 $107.93

Add for (1) 3" high pullout drawer w/dividers for 98", 110" $290.18& 134" bodies std 14" & 20" deep horizontal compartment installed

Add for Nested slide out trays-(4) 3" (1) 5" for 98", 110" $1,036.50& 132" bodies vertical compartment 14" and 20" deep

of 41

set of (5) installed

Add for Nested slide out trays-(3) 3" (1) 5" for 98", 110" $969.30& 134" bodies vertical compartment 14" and 20" deepset of (4) installed

Add for Over cab ladder rack, spans the load space, finish $722.90finish painted black-installed PN 230605-98

Add for Std Compartment top side mount ladder rack $534.54powder coated Universal White-installed PN 210577

Add for (4) 4" vent Louvers installed $84.51(must specify location) PN 170138

Add for curb side crane reinforcement 2000 lb. $1,169.88thru 4000lb capacity dual rear wheel CS RV installed

Add for Low Sliding roofs 98" bodies $1,885.23w/ 48-1/2" wide floor installed PN 207063painted standard color





Add for BC/CC paint for Low Sliding roofs for 98" bodies $137.22



Add for 97 decibel back up alarm $66.18

Add for aluminum fuel fill & gasket PN 171578 $34.62

Add for aluminum urea fill & gasket $34.62(2011-Current Ford Diesel Only) PN 221049

Add for supplemental fuel fill "DEF" bracket kit $63.13(2017-Current) Ford Diesel 60"CA Only Installed

Delivery Starting Point Fridley, MN

Price Per loaded mile delivery charge $2.75

of 41




1.0 UTILITY /SERVICE BODYMake AstoriaWarranty 3 yearDate & I.D. of Price List 11/17/2017Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Osceola, IAPrice per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO


*Note: The "Discount to be Applied to Price List" must be a numeric Not listing a numeric percentage may result in your bid being rejected.




of 41



1.0 UTILITY / SERVICE BODY FIBERGLASS

Make Astoria FiberglassSingle rear wheel bodies 79" wide w/15" deep compartmentsDual rear wheel bodies 94" wide w/20" deep compartmentsBody lengths 96", 108", 132"-see model numbers39" high compartment on all standard bodies48" high compartment on all VT bodiesFive year warranty (limited)Molded fiberglass side compartmentsV- Style CompartmentsMolded Fiberglass side compartmentGelcoat exterior finish(stock white)Fiberglass reinforced double laminated doorsHeavy duty strikers and Stainless Steel hingesAutomotive bulb door gasket seal12 ga steel smooth floor, primed with black gatorhyde finishUniversal steel structural body frame with rigid mounting kitFMVSS 108 lighting packageFlush mounted tail and back-up lightsCorrosion resistant fasteners, All self-locking nutsCompartment drainsStainless Steel rotary paddle latchesLicense plate bracket with light, Loomed wiring harnessExtruded aluminum drip rail, Fuel filler coneFull height fiberglass bulkhead between compartmentsNon skid finish on module tops, Louvered vents in each modulesDoor cable stops all door, Aluminum rock guards on front cornersAluminum trim on inside edge of moduleRubber fendersExterior steel parts finished with black gatorhyde finish

Warranty 6 year limited




LGS-96-56, 39" high for single rear wheel 56" CA $11,767.35

LGS-96-56, 39" high for dual rear wheel 56" CA $11,909.90

ASL-96-56, 48" high for single rear wheel 56" CA $12,755.66



of 41

ASL-96-56, 48" high for dual rear wheel 56" CA $12,898.20

LGS-108-60, 39" high for single rear wheel 60" CA $11,943.83


ASL-108-60, 48" high for single rear wheel 60" CA $14,054.84




Add for Std Shelving package for 96" long bodies (2) Adjustable fiberglass shelf w/ removable $1,031.75dividers in each front vertical compartment(1) fixed fiberglass divider shelf in SS Horizontal only(1) Adjustable fiberglass shelf in each rear vertical compartment

Add for Std Shelving package for 108" length bodies(2) Adjustable fiberglass shelves w/ removable $1,031.75dividers in each front vertical compartment(1) Fixed fiberglass shelf w/ removable dividers street side horizontal compartment(1) Adjustable fiberglass shelf each rear compartment

Add for Std Shelving package for 132" length bodies(2) Adjustable fiberglass shelves in each $1,589.71front vertical compartment(2) Adjustable shelves in 2nd vertical compartment(1) Fixed shelf w/removable dividersin street side horizontal compartment(1) Adjustable fiberglass shelf each rear compartment

Vertical Compartment Shelving options:Add for 1 adjustable shelf w/ removable dividers $139.83

Add for 2 adjustable shelf w/ removable dividers $275.59



Add for aluminum pull out drawer on slides: 2"deep with dividers on 4" centers, sliders rated @100# at full extension (price per drawer) $236.22

Horizontal Compartment Shelving options:Add for (1) fixed fiberglass shelf with removable $192.77

Add for (1) divider tray on bottom of compartment $192.77

Additional compartment shelvingAdd for 8 drawer metal cabinet installed $202.28

Add for 9 drawer metal cabinet installed $181.91

of 41

Add for 6 drawer metal cabinet installed (1 row of 6) $147.97


Add for Hotstick door only $175.13

Add for Hotstick door w/ thru shelf $471.07

Add for full length fiberglass shelf $297.31

Shelving AccessoriesAdd for rubber spaghetti matting (per shelf price) $28.51

Add for Material rail with (4) hooks $179.20

Compartment AccessoriesAdd for locking swivel hooks (per hook) $35.30

Add for LED Cargo area light/flush-mount 4" diameter $302.94

Add for vent in back wall of compartment $43.44

Add for Flexible tubular lighting (per compartment) $278.45three sides of the compartment opening

Add for Adhesive Strip Lighting (LED) around top and $278.45sides of compartment door facings

3/16" Aluminum treadplate floor ILO steel 96" body $281.02108" body $438.49132" body $533.52(39" Tall Bodies)

3/16" Aluminum treadplate floor ILO steel 96" body $281.02108" body $438.49132" body $533.52(48" Tall Bodies)

Installation PartsFour point spring mounting kit w/mid support tube Included

Add for Astoria quick plug wiring adapter Included

Gelcoat /Paint for 39" Tall BodiesAdd for Non-Standard Gel Coat Adder (No metallic finishes)96" body $1,434.94108" body $1,614.14132" body $1,972.54(Paint all metal parts to match color of body(In lieu of standard black Gatorhyde finish)

Gelcoat/Paint for 48" Tall BodiesAdd for Non-Standard Gel Coat Adder (No metallic finishes)96" body $1,508.25108" body $1,698.31132" body $2,074.36

of 41

(Paint all metal parts to match color of body(In lieu of standard black Gatorhyde finish)

Exterior Body AccessoriesAdd for Spare Tire Mount $90.96

Rubbermaid water cask holder $179.20

Double overlapping door (132" bodies only) $244.36

Add for Aluminum cone holder (vertical storage) $256.73

Add for Bolt-on steel vise bracket $328.68

Add for 60" Aluminum material rail and (6) hooks $340.75

Add for Crane reinforcement for 25,000 ft.lb. $1,653.51installed in rear vertical compartment

Add for Fiberglass roll top w/ double rear doors $2,014.62

Add for laser cut aluminum shovel basket up to $629.91132"L x 8"H x 20"W

Add for Combination fuel and DEF fuel cone $224.20

Add for D-ring recessed in body floor (per D-ring) $101.82

Add for Oxygen/acetylene tank holder (each) $149.33

Add for aluminum riser post for strobe $186.14(above cab level)

Add for Aluminum cab guard (headache rack),tube frame with expanded metal screen $937.07

TailgatesAdd for Aluminum Slam-Action tailgate w/ treadplate $505.01on one side and one double-action paddle latch

BumpersAluminum Non-Recessed Gripstrut Bumper, Not Designed For Towing $836.36

Aluminum Non-Recessed Treadplate Bumper, Not Designed For Towing $763.05

Aluminum Recessed Gripstrut Bumper, Not Designed For Towing $1,004.70

Aluminum Recessed Treadplate Bumper, Not Designed For Towing $858.08

Steel Non-Recessed Gripstrut Bumper, Not Designed For Towing $727.76

Steel Non-Recessed Treadplate Bumper, Not Designed For Towing $560.77

Steel Recessed Gripstrut Bumper, Not Designed For Towing $839.08

Steel Recessed Treadplate Bumper, Not Designed For Towing $725.04

Load bed and compartment topsAdd for 1/8" Aluminum treadplate on load walls

of 41

96" Body $465.64

Add for 1/8" Aluminum treadplate on load walls108" Body $503.66

Add for 1/8" Aluminum treadplate on load walls132" Body $586.47

Add for 1/8" Aluminum treadplate on compartment tops (both sides)96" Body $445.28108" Body $468.36132" Body $513.16

Aluminum Treadplate Flip-top compartmentAdd for Flip-top 96" body (per side) $767.02

Add for Flip-top 108" body (per side) $767.02


Hinges/HandlesAdd for electric door locks (each door) operated w/ key FOB $528.40

Stainless steel 3-point D-ring latch (price per door) $128.97

Stainless steel 3-point T-handle latch (price per door) $93.67

Transverse compartment and optionsAdd for Full fiberglass transverse compartment extended to both sides $872.91

Add for Partial transverse compartment extending to rear wall of opposite side $693.71

Add for Transverse Drawer- pulls out to one side (each) $779.24

Add for Transverse Drawer-pulls out to both sides (each) $921.78

Add for Fixed transverse shelf-full width $211.78

Add for Fixed transverse shelf-partial $164.27

Ladder and Pipe RackAdd for fixed bow ladder rack, unpainted aluminum $1,106.41

Add for Standard aluminum sloped ladder rack $927.22

Add for Furnishing and install 6" PVC tube w/ aluminum end caps $238.93

Steps and Grab HandleAdd for Aluminum grab handle installed at rear of body (each) $61.09

Add for Single cable step installed at rear, steel cables w/ bolt-on $278.30unpainted aluminum gripstrut

Add for Double cable step installed at rear, steel cables w/ bolt-on $321.74unpainted aluminum gripstrut


Add to undercoat 96" & 108" bodies $275.89

of 41

Add to undercoat 132" bodies $334.32

DEF fuel type fill, if required $123.54



of 41

d

of 41




1.0 UTILITY /SERVICE BODYMake FiberlineWarranty 3 yearDate & I.D. of Price List 9/12/2017Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Watertown, SD 57201Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO


*Note: The "Discount to be Applied to Price List" must be a numeric percentage. Not listing a numeric percentage may result in your bid being rejected.




of 41



1.0 UTILITY / SERVICE BODY FIBERGLASS

Make Fiberline FiberglassSingle rear wheel bodies 79" wide w/15" deep compartmentsDual rear wheel bodies 94" wide w/20" deep compartmentsBody lengths 96", 108", 132"-see model numbersLow Profile bodies 35" high compartments40" & 48" high compartment on all standard bodiesUp to 64" high compartment on all high side bodiesFive year warranty (limited)Molded fiberglass side compartmentsV- Style Compartments1/8" steel treadplae floor and bulkhead, primed and painted gloss b lackGelcoat exterior finish(stock white)All interior fiberglass gel coated whiteFiberglass reinforced double laminated doorsStainless steel paddle latches, all keyed alikeFully adjustable heavy duty strikers with safety catchFiber Line designed automotive style weather stripAluminum treadbrite front rock guardsStainless steel rear wheel well rock guardsStainless steel heavy duty hingesAll stainless steel bolts and self-locking nutsFlush shock mounted exterior lights to meet FMVSS 108 lighting requirementsExtruded aluminum drip rails above all side doorsFiberglass bulkhead between compartmentsCompartment drains in front and rear vertical compartmentsLighted license plate bracketLoomed one piece wiring harness with molded plugDual fuel recess molded into street side side pack8" aluminum drop down tailgate on 40" high bodies onlyNon skid finish on module tops, Louvered vents in each modulesDoor cable stops all door

Warranty 5 years




96"L x 79"W x 40"H (15" Deep Compartment) for single rear wheel 56" CA $6,589.61

96"L x 94"W x 40"H (20" Deep Compartment) for dual rear wheel 56" CA $7,431.30

96"L x 79"W x Up to 64"H (15" Deep Compartment) for single rear wheel 56" CA $8,856.74



of 41

96"L x 94"W x Up to 64"H (20" Deep Compartment) for dual rear wheel 56" CA $9,186.63









Add for Std Shelving package for 96" length bodies (2) Adjustable aluminum open shelves each vertical front $1,090.12(1) fixed aluminum shelf with dividers in street side horizontal compartment(1) Adjustable aluminum open shelf in each rear compartment

Add for Std Shelving package for 108" length bodies(2) Adjustable aluminum open shelves each vertical front compartment $1,090.12(1) fixed aluminum shelf with dividers in street side horizontal compartment(1) Adjustable aluminum open shelf in each rear compartment

Add for Std Shelving package for 132" length bodies(2) Adjustable aluminum open shelves each vertical front compartment $1,646.72(2) Adjustable aluminum open shelves each 2nd vertical compartment(1) fixed aluminum shelf with dividers in street side horizontal compartment(1) Adjustable aluminum open shelf in each rear compartment

Vertical Compartment Shelving options:

Add for 1 adjustable aluminum shelf w/ removable dividers $236.22



Add for aluminum pull out drawer on slides: 2" deep with dividers on 2" centers, Price per drawerMounted on full extension Grant Slides must include price of fixed shelf for mounting $253.86

Horizontal Compartment Shelving options:

Add for (1) fixed aluminum shelf with removable $181.91

Add for (1) fixed aluminum open shelf $118.11

Add for aluminum pull out drawer on slides: 2" deep with dividers on 2" centers, Price per drawerMounted on full extension Grant Slides must include price of fixed shelf for mounting $253.86

Additional compartment shelving


of 41


Add for 6 drawer metal cabinet installed (1 row of 6) $244.36


Add for Hotstick door only $251.15

Add for Hotstick door w/ thru shelf $547.10

Add for full length fiberglass shelf $259.29

Add for pull out tool box tray (250# capacity) $814.54

Compartment Accessories

Add for gas prop door stops (per compartment) for vertical doors $86.88

Add for locking swivel hooks (per hook) $38.01

Add for fixed hooks (per hook) $23.08

Add for LED flexible tubular lighting (per compartment) $217.36three sides of the compartment opening

1/8" aluminum tread plate floor and subframe in lieu of steel on 40" high bodies96" body $340.75108" body $590.54132" body $695.07

1/8" aluminum tread plate floor and subframe in lieu of steel on 48" high bodies96" body $606.83108" body $1,432.23132" body $1,538.12

Installation Parts

Add for colored gelcoat charge other than white*Solid Colors - No Metallic, Pearl color or black matches available*96" body $339.39108" body $373.33132" body $509.09(All metal parts are black Gatorhyde finish)

For Metallic colors to match cab color96" body $2,544.80108" body $2,688.80132" body $2,960.56(All metal parts are black Gatorhyde finish)

Exterior Body Accessories

Add for pipe vice table and rest $358.55

Add for Material rail and (6) hooks $456.14

Add for Crane reinforcement for 25,000 ft.lb. $1,775.69installed in rear vertical compartment

Add for Fiberglass roll top w/ double rear doors $2,021.41

of 41

Add for expanded metal aluminum shovel $532.16basket up to 132" long and 8" high

Add for Oxygen/acetylene tank holder (each) $135.76

Add for aluminum riser post for strobe $224.15(above cab level)

Add for Aluminum expanded metal cab guard,(headache rack, with tube frame, screen) $894.99

BumpersAdd for 8" non recessed steel treadplate bumper $515.98

Add for 8" recessed steel treadplate bumper w/safety chain "D" rings $572.99

Add for 8" non recessed steel gripstrut bumper $613.72

Add for 8" recessed steel gripstrut bumper w/safety chain "D" rings $703.32

Add for 8" non recessed aluminum Treade-Brite bumper $572.99

Add for 8" recessed aluminum TreadeBrite bumper w/safety chain "D" rings $630.01

Load bed and compartment topsAdd for 1/8" Aluminum treadplate on load walls96" Body with 35" or 40" high compartments $614.9896" Body with High side $718.15

Add for 1/8" Aluminum treadplate on load walls108" Body with 40" high compartments $692.36108" Body with 48" high compartments $1,038.54

Add for 1/8" Aluminum treadplate on load walls132" Body with 40" high compartments $943.51132" Body with 48" high compartments $1,369.78

Add for 1/8" Aluminum treadplate on compartment tops (both sides)96" Body $614.98108" Body $718.15132" Body $943.51

Fiberglass Flip-top compartment w/3" deep divider trayAdd for Flip-top 96" body (per side) $992.38


HingesAdd for electric door locks, locks all doors w/one FOB96" Body $1,613.09108" Body $1,613.09132" Body $2,074.66

Hinges/HandlesStainless steel 3-point D-ring latch (per door) $104.53

Add for gang-lock system 96" Body $716.79108" Body $716.79

of 41

132" Body $954.37

Transverse compartment and optionsAdd for Steel treadplate Transverse open to one side $456.14

Add for Aluminum Treadplate Transverse open to one side $471.07

Add for Transverse open to both sides (Steel and Aluminum only) $93.67

Add for cage and one drawer pull one side 2/3rd's length $576.96

Add for cage and two drawers pull one side, 2/3rd's length $887.85

Add for cage and three drawers, pull one side, 2/3rd's length $1,050.75

Add for cage and one drawer pull both sides full length $609.55

Add for cage and two drawers pull both sides full length $950.29

Add for cage and three drawers, pull both sides full length $1,304.62

Add for fixed transvers shelf, 2/3rd's length $253.86

Add for fixed transverse shelf, full length $281.02

Ladder RacksAdd for bow ladder rack installed (steel) $479.22

Add for bow ladder rack installed (aluminum) $575.61

Add for side mount ladder rack installed (steel) $344.82

Add for side mount ladder rack installed (aluminum) $536.24

Add for horizontal ladder rack with roller (steel) $548.46

Add for horizontal ladder rack with roller (aluminum) $644.84

Add for slanted steel pipe rack $338.03

Add for furnish and install aluminum pipe rack $338.03

Grab HandleAdd for grab handles installed (each) $44.80







of 41




1.0 UTILITY /SERVICE BODYMake T.L. WoodsWarranty 3 yearDate & I.D. of Price List 11/13/2017Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Stewartville, MN Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO






of 41



1.0 UTILITY / SERVICE BODY ALUMINUM

Make TL Woods Standard 96UB Aluminum Service Body56" Single rear wheel application40" high, 48-1/2" wide floor, 15" compartmentsHigh Vertical Compartments front and rearQuick-mount mounting kitBody constructed of 1/8" smooth aluminumFrame is constructed on 3" channel, 12" on centerHorizontal compartments open(1) adjustable flat shelf each vertical compartmentTailgate included1/8" treadbrite floorStainless steel locks for securityAluminum finish inside and outsideRubber type weather stripping for sealStop/Turn/Tail & Back up lightsStandard bumper

Price $8,800.67

Warranty 5 years




Add for 96" body for Dual Rear Wheel 56" CA $226.65

Add for 108" body for Dual Rear Wheel 60" CA $1,150.33

Add for 132" body for Dual Rear Wheel 84" CA $2,627.09

Add for flip top per side $510.31

Add for Aluminum fuel filler $175.85






of 41

DEF fuel style fill, if required $123.54



of 41




1.0 UTILITY /SERVICE BODYMake Monroe Custom BodiesWarranty 5 yearDate & I.D. of Price List 9/21/2017Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWED

Delivery Starting Point Address Greenfield, IN 46140Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO






of 41



1.0 UTILITY / SERVICE BODY

Make MCB 96" Series Model SB96M 4816-AL56" Single rear wheel application42.5" high, 48-1/2" wide floor, 16" compartments, OA width 80-1/2"M-Style CompartmentsQuick-mount mounting kitAutomotive style spring clip-on gaskets on doors all compartmentRemovable chain door retainers on horiz doorsSpring door holders on vertical doors1st vertical both sides: (1) adj. divider tray, (1) adj. shelfHorizontal both sides: (1) adj. d (1) fixed shelf - centeredRear vertical both sides: (1) adjustable shelfLift and lock tailgate; .125 alum. alum pins & brackets, 12" highDoors: heavy duty double panel .125, 3003, H214 alum. Outerpanels, Hat channel formed .090, 3003, H14 inner panelsStainless steel concealed hinges on all doorsStainless steel single point slam paddle latches on all doorsPainted on fleet color (no base coat clear coat paint included)Inner doors and door jambs are painted Compartment interiors painted white primerBody panels: solid welded .125, 3003, H14 aluminumUnder frame: 6061, T6 structural aluminum channelFloor: .125, 6061, T6 brite aluminum tread platePositive drip rails over all doors

Price $11,174.01

Warranty 5 years for hinges, latches, and rust through




Deduct for no paint on 96" bodies ($1,616.77)






of 41




Add for 96" body for Dual Rear Wheel $1,204.1656" CA Model SB96M5320-AL

Add for 108" body for Single Rear Wheel $972.0160" CA Model SB108M4816-AL



Add for 12" high slam action tailgate ILO lift and latch $1,018.17

Add for Alum. Treadplate Bumper 8" x 80-1/2" $608.19

Add for Alum. Treadplate Bumper 8" x 93-1/2" $900.06

Add for Alum. Grip Strut Bumper 9" x 80-1/2" $1,147.14

Add for Alum. Grip Strut Bumper 9" x 93-1/2" $1,244.88

Add for recess in Alum. Treadplate Bumper $230.79

Add for recess in Alum Gripstrut Bumper $339.39

Add for Class IV Receiver hitch 12,000 lb. $278.66capacity 1801050L

Add for (4) 4" HD Pull Out Trays $1,278.8226.25" W x 22" H x 13.75" D P/N 058-2B44

Add for (4) 4" HD Pull Out Trays $1,278.8226.25" W x 22" H x 17" D P/N 058-1B44

Add for 9 drawer cabinets horizontal compartment $510.44


Add for 18 drawer cabinets horizontal compartment $1,020.89

Add for LED work light installed $101.74

Add for Alum. Overhead ladder rack 8' plus 4' over hang $4,306.191.5" square x 1/8" aluminum box tubing, removable rear cross bar

Add for Alum. Flat Top Std Compartment top mount $727.65ladder rack

Add for Alum. Rear sloping compartment top ladder rack $84.17ILO standard flat style

of 41

Add for Crane reinforcement 2000 lb. $3,187.56capacity for 96" Bodies SRW)

Add for Crane reinforcement 4000 lb. capacity $3,187.5696" DRW (not available 96" SRW Bodies)

Add for Crane reinforcement 4000 lb. capacity 108" SRW $3,187.56

Add for Crane reinforcement 4000 lb. capacity 108" DRW $3,187.56



Add for Fuel filler hole ONLY $46.16




of 41




Make MCB 96" Series Model SB96M 481656" Single rear wheel application42.5" high, 48-1/2" wide floor, 16" compartments, OA width 80-1/2"M-Style CompartmentsQuick-mount mounting kitAutomotive style spring clip-on gaskets on doors all compartmentRemovable chain door retainers on horiz doors Spring door holders on vertical doors1st vertical both sides: (1) adj. divider tray, (1) adj. shelfHorizontal both sides: (1) fixed shelf-centeredRear vertical both sides: (1) adjustable shelfLift and lock tailgate; 12 ga. galvanneal w/ss pins & brackets, 12" highDoors: double panel 18 ga. Galvanneal Steel w/12 ga. Stiffener angleStainless steel concealed hinges on all doorsStainless steel single point slam paddle latches on all doorsPainted on fleet color (no base coat clear coat paint included)Inner doors and door jambs are painted Compartment interiors painted white primerBody panels: 14 ga. and 12 ga. Galvanneal SteelUnder frame: formed 10 ga. Galvanneal steel, E-Z mountFloor: 12 ga.Galvanneal steel tread platePositive drip rails over all doors

Price $6,376.38











of 41



Add for painting 132" H bodies standard color $311.0348" high body

Add for BC/CC paint on 132" bodies $494.4348" high body











Add for 96" body for Dual Rear Wheel $583.7556" CA Model SB96M5320-DW

Add for 108" body for Single Rear Wheel $472.4360" CA Model SB108M4816-SW

Add for 108" body for Dual Rear Wheel $769.7460" CA Model SB108M5320-DW

Add for 132" body for Dual Rear Wheel $2,693.4084" CA Model SB130M5320-DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side

Add for 132" body for Dual Rear Wheel $3,514.7384" CA Model SB130M5320H-DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body

Add for 144" body for Dual Rear Wheel $4,534.26102" CA Model SB144M5320HIncludes 2nd & 3rd Vertical w/(1) adj.

of 41

divider tray & (1) adj. shelf/side48" high body

Add for 154" body for Dual Rear Wheel $5,631.17108" CA Model SB154M5320HIncludes 2nd & 3rd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body


Add for 12" high slam action tailgate ILO lift and latch $494.15

Add for Treadplate Bumper 8" x 80-1/2" $327.17

Add for Treadplate Bumper 8" x 93-1/2" $437.14

Add for Grip Strut Bumper 9" x 80-1/2" $556.60

Add for Grip Strut Bumper 9" x 93-1/2" $543.03

Add for recess in Treadplate Bumper $112.68

Add for recess in Grip Strut Bumper $165.62


Add for MCB platform Ext/Work Bench Bumper $2,371.66Notched for outriggers on both ends, thru box with verticalhinged doors, one on each end, 15" wide x full width, slamaction handles, single point, installed and painted

Add for (4) 4" HD Pull Out Trays $1,278.8225.25" W x 13.75" D P/N 058-2B44

Add for (4) 4" HD Pull Out Trays $1,278.8225.25" W x 17" D P/N 058-1B44

Add for (7) drawer combo cabinet, 25.25" W x 17" D x 37" H $2,514.21(2) 6" high, (2) 4" high, (3) 3" high, all drawers on 300 lb.Grant Slides, with dividers




Add for each grip strut folding steps installed at rear $439.85

Add for each LED work light installed $101.74

Add for Overhead ladder rack 8' plus 4' over hang $2,090.651.5" square x 1/8" with removable rear cross bar

of 41

Add for Std Compartment top mount flat ladder rack $352.97

Add for Rear sloping compartment top ladder rack ILO flat top $40.73ladder rack





















GM Underframe Mounting Kit $312.24




of 41




Make MCB 96" Series Model SB96M 4816-SS56" Single rear wheel application42.5" high, 48-1/2" wide floor, 16" compartments, OA width 80-1/2"M-Style CompartmentsQuick-mount mounting kitAutomotive style spring clip-on gaskets on doors all compartmentRemovable chain door retainers on horiz doorsSpring door holders on vertical doors1st vertical both sides: (1) adj. divider tray, (1) adj. shelfHorizontal both sides: (1) fixed shelfRear vertical both sides: (1) adjustable shelfLift and lock tailgate; 12 ga. 304 SS w/ss pins & brackets, 12" highDoors: double panel 20 ga. SS outer panels w/20 ga. SS Hat Channel inner panelStainless steel concealed hinges on all doorsStainless steel single point slam paddle latches on all doorsPainted on fleet color (no base coat clear coat paint included)Inner doors and door jambs are painted Compartment interiors painted white primerBody panels: 14 ga. and 12 ga. 304 Stainless SteelUnder frame: formed 10 ga. stainless steel, E-Z mountFloor: 11 ga. 304 stainless steel tread platePositive drip rails over all doors

Price $10,359.47





Deduct for no paint on 96" bodies ($1,616.77)






of 41
















Add for 96" body for Dual Rear Wheel $1,098.2756" CA Model SB96M5320-SS-DW

Add for 108" body for Single Rear Wheel $887.8560" CA Model SB108M4816-SS-SW

Add for 108" body for Dual Rear Wheel $1,447.1660" CA Model SB108M5320-SS-DW

Add for 132" body for Dual Rear Wheel $5,113.9484" CA Model SB132M5320-SS-DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side

Add for 132" body for Dual Rear Wheel $6,607.2684" CA Model SB130M5320H-DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body

Add for 144" body for Dual Rear Wheel $8,524.13

of 41

102" CA Model SB144M5320HIncludes 2nd & 3rd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body



Add for 12" slam action tailgate ILO lift and latch $928.57

Add for SS Treadplate Bumper 8" x 80-1/2" $555.24

Add for SS Treadplate Bumper 8" x 93-1/2" $821.33

Add for SS Grip Strut Bumper 9" x 80-1/2" $1,046.68

Add for SS Grip Strut Bumper 9" x 93-1/2" $1,136.28

Add for Recess in SS Treadplate Bumper $210.42

Add for Recess in SS Gripstrut Bumper $310.88


Add for MCB platform Ext/Work Bench Bumper $4,029.25Notched for outriggers on both ends, thru box with verticalhinged doors, one on each end, 15" wide x full width, slamaction handles, single point, installed and painted

Add for (4) 4" HD Pull Out Trays $1,278.8226.25" W x 13.75" D P/N 058-2B44

Add for (4) 4" HD Pull Out Trays $1,278.8226.25" W x 17" D P/N 058-1B44




Add for each grip strut folding steps installed at rear $439.85

Add for each LED work light installed $101.74

Add for SS Overhead ladder rack 8' plus 4' over hang $3,930.141.5" x 1/8" with rear removable cross bar

Add for flat top Std Alum. Compartment top mount $663.85

of 41

ladder rack

Add for SS Rear sloping compartment top mount $76.02ladder rack ILO flat top style











of 41

s

of 41




1.0 UTILITY /SERVICE BODYMake Dakota BodiesWarranty ear steel, 10 year SS & aluminumDate & I.D. of Price List 10/9/2017Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE Delivery Starting Point Address Watertown, SD 57201Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO



Furnish separate price quote for: BODY COMPONENTS AND ATTACHMENTS FOR 6,000 TO 19,500



of 41




Make Dakota Steel 96 Series Body56" Single rear wheel application40" high, 49-1/4" wide floor, 14" or 22" deep compartments, OA width 80-1/2"VV-Style CompartmentsAutomotive style spring clip-on gaskets on doors all compartmentRemovable chain door retainers on horiz doorsSpring door holders on vertical doors1st vertical both sides: (2) adj. divider trays w/(2) adj. dividers per trayHorizontal both sides: OpenRear vertical both sides: (1) adjustable divider shelf w/(2) adj. dividers per trayTailgate: 6" high removable composite tailgateDoors: double panel 18 ga. Galvanneal Steel w/18 ga. Stiffener angleStainless steel concealed hinges on all doorsStainless steel single point slam paddle latches on all doorsPainted on fleet color (no base coat clear coat paint included)Inner doors and door jambs are painted Compartment interiors primed onlyBody panels: 16 ga. Galvanneal SteelWheel panels & front bulkhead: 14 ga. Galvanneal SteelCompartment tops: 13 ga. Hot rolled treadplateUnder frame: 4" structural steel channelFloor: 12 ga. hot rolled tread platePositive drip rails over all doorsBody undercoatedStandard Lighting: (2) LED STT, (2) LED BU, Marker lights 3/4" button style(3) light cluster, 3/4" button styleLighted license plate bracket

Price

Warranty 5 yrs. for hinges, latches, rust through

Date & I.D. of Price sheet

Discount, if any, to be applied to price sheet

Installation

Add for 98" Galvannel body for Dual Rear Wheel 56" CA model

Add for 98" body Component body Aluminum Body Materials

Add for 98" body Component Body Northlander Stainless Steel Package



of 41

Add for 110" Galvannel body for Dual Rear Wheel 60" CA model

Add for 132" Galvannel body for Dual Rear Wheel 84" CA modelIncludes 2nd Vertical w/(2) adj. divider trays &(2) adjustable dividers per tray

Add for BC/CC paint on 98" bodies


Add to undercoat 98" & 110" bodies

Add for painting 133" bodies standard color


Add to undercoat 133" bodies

Add side access steps ILO Compartment

Add for Treadplate bumper & skirts

Add for hinged tailgate

Add for LED rear lights in side packs

Add for 24" Tail shelf

Add for Class IV Receiver hitch 12,000 lb.capacity 1801050L

Add for Drop in tailgate

Add for LED rear lights in Tail shelf

Add for Oxy/Acetylene compartment

Add for bolt on grab handle

Add for Pool type grab handle

Add for cable step

Add for belt step

Add for hotstick shelf

Add for Vision-X LED pod lights

Add for LED rope lights per compartment

Add for one chock storage each side

Add for two chock storage CURBSIDE

Add for two chock storage on EACH side

Add for 12' 6" aluminum ladder rack storage

Add for 98" component body Equipto Drawers

of 41

Add for angled ladder rack

Add for 12 Equipto drawer cabinets horizontal compartment

Add for Crane reinforcement 3000 lb.

Add for Crane reinforcement 3500-6000 lb. capacity

Add for Crane reinforcement 6500-10,000 lb. capacity

Add for Crane reinforcement 10,500-14,000 lb. capacity

Add for 97 decibel back up alarm

Add for fuel fill spout kit, aluminum w/gasket& rivets

Add for fuel fill spout kit for pick up box delete

GM Underframe Mounting Kit

DEF fuel type fill, if required

Delivery Starting Point

Price Per loaded mile delivery charge

of 41




1.0 UTILITY /SERVICE BODYMake Liftmoore BodiesWarranty 6 years for rust throughDate & I.D. of Price List 11/14/2017Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE Delivery Starting Point Address Houston, TXPrice per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO



Furnish separate price quote for: BODY COMPONENTS AND ATTACHMENTS FOR 6,000 TO 19,500



of 41




Make Liftmoore Crane Body 40K LM-CB-110284" CA chassis132" long, 94" wide, 44" high22" compartment depth50" loading area, 27" floor line63" tall front compartment with holder for 2 bottles12 gauge galvaneal front, rear, and bottom compartment panels12 gauge tread plate compartment tops, load area walls and front bulkhead14 gauge A40 galvaneal steel fenders, door facings, and tailgateHoles for recess lights punched high in rear panel and in crane support box w/ additional support platesInterior support for underside of boom support mounting1/8" medium pattern tread plate floor w/ reinforced understructure6 Tie-down rings, floor mounted, folding recessed, capacity 2,000 lbs. eachFront, rear, & rear extension cross members 5" x 3" x 3/16" rectangular tubing5" high 3/16" formed intermediate cross members5" high 6.7# structural steel front extension cross members3 full length formed 12 gauge steel "C" channel longitudinals1/2" steel flat bar long runnersAutomotive grade undercoatingDouble panel doors with 14 gauge galvanneal steel outer panel and 18 gauge corrugated inner panelDoor design includes a knife edge for continuous positive contact w/ the door sealStainless steel 3 point D-Ring latch assemblyStainless steel 5/16" diameter rod hinge pins, stainless steel pillow block hinges self-lubricating plastic bushingsSpring loaded door retainers on vertical doors, chain supports on horizontal doorsMaster lock, spring loaded return to the open positionSlam latch tailgate with 12 ga tread plate overlay & center release stainless latchAdjustable shelving - 3 vertical compartments and 2 horizontal compartments w/ 15 dividers, all galvaneal steelDrawer unit - 31" tall, 34" wide 20" deep - 2 each 3", 6", 9" - Compartment behind driver w/ dividers & 250 lbs. capacity each.LED light kit - tail and clearance lights (shipped loose for installation after paint)Rubber roll crown fenders (shipped loose for installation after paint)Door seal, automotive type square bulb EPDM (shipped loose for installation after paint)Floor drain plugs (shipped loose for installation after paint)NOT INCLUDED BUT REQUIRED: Crane Outriggers or Jack stands Hydraulic Reservoir & hoses for crane Bumper/Tail shelf Boom Rest



of 41

Pump & PTO for Hyd supply Wiring Adapter specific to Manufacturer Mounting kit specific to Manufacturer

Price $20,602.28

Warranty 1 year, 6 years rust through




Add for BC/CC paint $527.01

Add to undercoat body $334.32

Add Tail shelf, 8" Step Pintle Recess LM-ACCY-1019 $2,986.64

Add Service body mounting kit 40k LM-ACCY-1018 $461.57 Ford F-550/Ram 5500 84CA-132"

Add wiring adapter kit Ford SD LM-ACY-1021 $51.59 Use with LM-ACCY-1022

Add wiring adapter kit Ford SD RK LM-ACY-1022 $70.59 Use with LM-ACCY-1021

Add Kit, Mounting Crane 8.875" Bolt 28440 $43.31 5000/2550/3055/6036/3660/4064



BODY COMPONENTS AND ATTACHMENTS FOR …...Add for off road mount kit 2006-2016 Ford 56" CA PN 184173...

Documents

Transcript of BODY COMPONENTS AND ATTACHMENTS FOR …...Add for off road mount kit 2006-2016 Ford 56" CA PN 184173...