BOBJ (SAP BI) APS Spliting Best Pra

7/29/2019 BOBJ (SAP BI) APS Spliting Best Pra

http://slidepdf.com/reader/full/bobj-sap-bi-aps-spliting-best-pra 1/35

SAP COMMUNITY NETWORK SCN – http://scn.sap.com/docs/DOC-31711

© 2012 SAP AG 1

Best Practices for SAPBO BI 4.0Adaptive Processing Servers

Applies to:

SAP BusinessObjects BI 4.0,

Summary:

This whitepaper summarizes best practices, tuning, configuration and troubleshooting to help make your SAPBusinessObjects Adaptive Processing Server perform best. There are plenty of additional whitepapers / notes which delveinto significant detail – this whitepaper is meant to be a handy summary for an administrator familiar with SAPBusinessObjects Enterprise BI4.0 platform.

Document Owner: Jan De Vilder

Senior Certified BI / MoBI ConsultantSAP Belgium – LuxembourgSAP Levallois - France

[email protected]

Company: SAP

Last update: November 26 2012



Best Practices for SAPBO BI 4.0 Adaptive Processing Servers Version November 26

th , 2012


© 2012 SAP AG 2

Contents

1 Document update history ...................................................................................................................... 4 2 Background ........................................................................................................................................... 4 3 Architecture overview ............................................................................................................................ 5 4 Adaptive Processing Server Services ................................................................................................... 6 5 Best practices for SAP Business Objects BI4.0 server configuration ................................................... 9

5.1 Introduction............................................................................................................................................ 9 5.2 Adding multiple APS servers................................................................................................................. 9

5.2.1 How to create a new APS server in the CMC ................................................................................................ 9 5.2.2 Cloning APS servers ................................................................................................................................... 11

5.3 Starting point after installing BI4.0 ...................................................................................................... 12 5.3.1 CLONE the original Adaptive Processing Server (APS) .............................................................................. 12 5.3.2 Add a dedicated APS for DSL BRIDGE Service .......................................................................................... 12 5.3.3 Add a dedicated APS for SEARCH Index .................................................................................................... 12 5.3.4 Add a dedicated APS for ANALYSIS (Multi Dimensional Analysis Service - Analysis for OLAP) ................ 13 5.3.5 Add dedicated APS for ALL OTHER NECESSARY Services ...................................................................... 13

6 Other APS servers to consider............................................................................................................ 14 6.1 Separate APS for DSLBridge Service ................................................................................................. 14

6.1.1 DSL component in Crystal Reports for Enterprise and Dashboards ............................................................ 14 6.1.2 Isolating DSLBRIDGE: ................................................................................................................................ 15 6.1.3 Memory options for DSLBRIDGE: ............................................................................................................... 15

6.2 Separate APS for Search Service ....................................................................................................... 16 6.3 Separate APS for Analysis .................................................................................................................. 17 6.4 Separate APS for Life Cycle Manager (LCM) ..................................................................................... 17 6.5 Configure the APS to handle concurrent publications. ....................................................................... 18 6.6 Separate APS for Heavy Visualisations (Charting) ............................................................................. 18 6.7 Other APS to consider ........................................................................................................................ 19 6.8 Separate APS for unnecessary Services ............................................................................................ 19 6.9 Keep the original APS ......................................................................................................................... 19 6.10 General APS recommendations ......................................................................................................... 19 6.11 Command Line Parameters ................................................................................................................ 20 6.12 Overview of available JVM –X parameters ......................................................................................... 21

7 Configuring, monitoring and tracing APS ............................................................................................ 22 7.1 Analyzing APS memory consumption by Heap Dump generation ..................................................... 22

7.1.1

Heap Dump generation:............................................................................................................................... 22

7.1.2 Using MAT to Analyze SAP ME Heap Dumps: ............................................................................................ 22 7.2 Stop unnecessary servers ................................................................................................................... 22 7.3 Multi-instances deployment................................................................................................................. 23 7.4 Configuring BICS Result Chunk Sizes (BICS) .................................................................................... 23 7.5 Adapting the parameters for LOV chunk size ..................................................................................... 24

7.5.1 For Interactive Analysis Desktop (i.e. WebI Rich Client): ............................................................................ 24 7.5.2 For WebIntelligenceProcessingServer:........................................................................................................ 25 7.5.3 For DSL-BICS layer: .................................................................................................................................... 25

7.6 How to monitor DSLBRIDGE memory usage ..................................................................................... 27




th , 2012


© 2012 SAP AG 3

7.7 Getting Traces for investigation .......................................................................................................... 28 8 SAP Business Objects BI4.0 platform settings ................................................................................... 29

8.1 CMS settings ....................................................................................................................................... 29 8.2 Web application server (Tomcat) ........................................................................................................ 29 8.3 Avoid background activities................................................................................................................. 29

9 Deployment Examples ........................................................................................................................ 30 9.1 Deployment example 1 ....................................................................................................................... 31 9.2 Deployment example 2 ....................................................................................................................... 32

10 Additional Information ......................................................................................................................... 33 10.1 Abbreviations ...................................................................................................................................... 33 10.2 SAP Notes ........................................................................................................................................... 33 10.3 Pattern Books ...................................................................................................................................... 33 10.4 BI4 Sizing Companion guide ............................................................................................................... 34 10.5 BI4 Sizing Estimator ............................................................................................................................ 34

11 Copyright ............................................................................................................................................. 35




th , 2012


© 2012 SAP AG 4

1 Document update history

Version Modification By(*) Date Comment

0.2 Jan De Vilder June 12th, 2012 DRAFT first version proposed for review.

0.3 Jan De Vilder June 13th, 2012 DRAFT second version proposed for review.

0.4 Jan De Vilder June 20th, 2012 DRAFT third version proposed for review.

0.5 Jan De Vilder June 26th, 2012 DRAFT fourth version proposed for review.

1.0 Jan De Vilder August 7th,

2012 Pre-Final version

1.1 Jan De Vilder September 6th, 2012 Final Version to be published

1.2 Jan De Vilder October 11th, 2012 Additional information on Crystal Reports for Enterprise

Dashboards and LCM

1.3 Jan De Vilder October 26th, 2012 Updated Sizing info

(*) Many people, consultants, product specialists, architects, support engineers… have contributed to this document whileadding, modifying or reviewing content. Without their help, the document would not be in its current shape.

Thanks a lot!

2 Background

The default installation of SAP BusinessObjects Business Intelligence Platform installs one Adaptive Processing Server(APS) per host system. The Adaptive Processing Server is a generic server that hosts services responsible for processingrequests from a variety of sources.

This default configuration is not always optimal, as all services run on a single java APS instance, with a maximum javaheap size allocation of 1 GB RAM.

The best practices described in this document help the BI Administrator to optimally configure the APS in SAP BO BI4.0.

This document is based on the server architecture in BI4.0 SP2 patch 2.12 minimum. APS services are updated onregular basis for every new Service Pack, Support Pack, or Fix Pack. The services listed in this document can get

outdated, hopefully not causing confusion.

This document is particularly focused on isolation of services in a dedicated APS.




th , 2012


© 2012 SAP AG 5

3 Architecture overview

Tiers:

SAP BusinessObjects Business Intelligence platform can be thought of as a series of conceptual tiers:

Client tier

Management tier

Storage tier

Processing tier

Data tier

The APS is a part of the Processing tier.

By default, the BI4.0 platform contains one Adaptive Processing Server (APS) per host system. The Adaptive ProcessingServer is a generic server that hosts multiple services responsible for processing various requests.




th , 2012


© 2012 SAP AG 6

4 Adaptive Processing Server Services

The table below lists all services that are part of the APS (in BI4.0).

The purpose of this table is to identify what APS-Services are needed for your deployment. Go through the last column“Application”, where you’ll find the necessary applications required in your environment, list the corresponding services.

Service Service Category Service Description Application

AdaptiveConnectivityService

Connectivity Services Provides connectivity services(replaces Connection Server).

Web Intelligence,Dashboards(Xcelsius), CrystalReports, Explorer

BEx WebApplicationService

Analysis Services Provides integration of SAPBusiness Warehouse (BW)Business Explorer (BEx) webapplications with BI launchpad.

BEx

Client Auditing

Proxy Service

Core Services Collects auditing events sent from

clients and forwards them to theCMS server.

Client tools as

Interactive AnalysisDesktop

Custom DataAccess Service

Connectivity Services Provides dynamic connections todata sources that do not require aConnection Server. This serviceallows accessing and refreshingreports created using somepersonal data provider like CSVfiles.

Web Intelligence,Dashboards (Xcelsius)

Data FederationService

Data FederationServices

Enables multi-source universes bydistributing queries acrossdisparate data sources federatesdata through a single datafoundation

Web Intelligence,Dashboards(Xcelsius), CrystalReports for Enterprise,Explorer

DocumentRecovery Service

Web IntelligenceServices

Web Intelligence document auto-save and recovery.

Web Intelligence

DSL BridgeService


Dual Semantic Layer (DSL) sessionsupport. Optimizes BICSconnectivity for SAP BW. HandlesUNX SQL/LOV generation forrelational sources.

Web Intelligence,BO Explorer

Excel DataAccess Service


Supports Excel files uploaded toSAP BusinessObjects BI platformas data sources.

Web Intelligence

Web IntelligenceMonitoringService


Monitors Web Intelligence Servers. Web Intelligence




th , 2012


© 2012 SAP AG 7


Insight to ActionService

Core Services Enables actions to be invoked andprovides support for Report toReport Interface (RRI)

Crystal reportsDashboards (Xcelsius)

Lifecycle

ManagementClearCaseService

LifecycleManagement

Services

LCM supports either SubVersion or

ClearCase to support versioning ofobjects. This service is to managethe ClearCase support

LCM

LifecycleManagementService

LifecycleManagementServices

Lifecycle Management Coreservice.

LCM

MonitoringService

Core Services Provides monitoring functions All

Multi-Dimensional

Analysis Service

Analysis Services Provides access to multi-

dimensional Online AnalyticalProcessing (OLAP) data; convertsthe raw data into XML, which canbe rendered into Excel, PDF, orAnalysis (formerly Voyager)crosstabs and charts.

Analysis for OLAP,

Creation of OLAPconnections

Platform SearchService

Core Services Provides searching functionality forthe platform.

Search

Publishing PostProcessing

Service

Core Services Performs actions on reports afterthey have completed, such as

sending a report to a specific outputlocation.

Publications of WebIntelligence or Crystal

reportsl

PublishingService

Core Services Coordinates with the PublishingPost Processing Service andDestination Job Service to publishreports to a given output location,such as the file system, FTP, email,or a user’s inbox.

Publications of WebIntelligence or Crystalreports

Rebean Service Web IntelligenceServices

SDK used by Web Intelligence andExplorer

Web IntelligenceExplorer

Security TokenService

Core Services SAP Single Sign-On support. OffersSingle Sign On (SSO) capability toconnect to SAP BW data sources.

All

TranslationService

Core Services Translates InfoObjects with inputfrom the Translation Managerclient.

All




th , 2012


© 2012 SAP AG 8


Visual DifferenceService

LifecycleManagementServices

Determines whether documents arevisually identical for doc promotionand Lifecycle Management.Currently users can view thedifference between 2 LCMBIAR

files or LCM Jobs.

LCM

VisualizationService


Common Visualization ObjectModel Service, used by WebIntelligence for charts rendering inWebI reports. The CVOM isdedicated to Web Intelligencereporting. It is what creates thecharts displayed in a WebIntelligence document.

Web Intelligence

Crystal for Enterprise

Analysis for OLAP




th , 2012


© 2012 SAP AG 9

5 Best practices for SAP Business Objects BI4.0 server configuration

5.1 Introduction

SAP Note 1694041 (How to size the Adaptive Processing Server ), explains in examples how each APS container could beconfigured. This approach will result in improved response times and larger throughput, but at the expense of higheroverall memory utilization on the platform due to the increased number of Java Virtual Machines.

When summing the minimum Xmx parameters for the various APS servers (MDAS, DSL, LCM…) from above mentionedSAP Note, the total amount of required RAM is 26 GByte.

On a SAP Business Objects BI4.0 server with 32 Gbyte of RAM, there would be only 6 Gbyte working memory left.

The advantage if the approach described in this SAP Note, is very useful to isolated workflows for easier troubleshootingand the ability to turn-off specific features without requiring downtime.

The approach assumes that customers use all features of BI 4.0. If customers are not using Content Search, MDAS, orBW connectivity, then all these unused services could be moved in a single APS , and stop this APS.

Therefore, it is important to identify first in the above table what services are required for your deployment.

It is not recommended to remove or delete unused services from the system. Services that are not currently in use maylater be needed as business processes evolve and new features are required.

Since it is important to understand what each sub-service is responsible for and how they interact with one another,stopping unused services is typically a task of SAP consulting.

See BI4 Sizing Estimator, to perform sizing estimates.

5.2 Adding multiple APS servers

5.2.1 How to create a new APS server in the CMC

You can run multiple instances of the same server on the same machine. To add an APS server, follow the steps below:

1. Log in CMC as Administrator




th , 2012


© 2012 SAP AG 10

2. Go to Organize section, choose “Servers”

3. In this example, create a new “Data Access DSL” APS container.On the Manage menu, click “New” > “New Server”

4. The "Create New Server" dialog box appears. Choose the “Service Category”




th , 2012


© 2012 SAP AG 11

5. Choose the type of service that you need from the Select Service list, then click Next.To add an additional service to the server, select the service in the Available Additional Services list andclick “>”.

6. After adding the additional services you want, click Next.If your BI platform architecture is composed of multiple nodes, choose the node where you want to addthe new server from the Node list.

7. Type a name for the server in the Server Name box.Each server on the system must have a unique name. The default naming convention is <NODENAME>.<servertype> (a number is appended if there is more than one server of the same type on thesame host machine).

To include a description for the server, type it into the Description box.

8. Click Create.

The new server appears in the list of servers in the Servers area of the CMC, but it is neither started norenabled.

9. Review the configuration settings of the created server !

10. Use the CMC to start and enable the new server when you want it to begin responding to BI platformrequests.

5.2.2 Cloning APS servers

If you want to add a new server instance to your deployment, you can clone an existing server. The cloned server retains

the configuration settings of the original server. This can be particularly useful if you are expanding your deployment (e.g.with additional nodes) and want to create new server instances that use all or almost all of the same server configurationsettings as an existing server. The use of configuration templates makes sure the configuration of similar servers is kept insync.

There is no particular recommendation or best practice on whether to clone servers or whether to create new servers.

When cloning an APS server, it might be necessary to remove unnecessary services afterwards.

When creating a new APS, it is necessary to add the required services.

The best practice is to keep the original APS for further use and not delete it! If the original APS is no longer needed, youmight consider stopping it.




th , 2012


© 2012 SAP AG 12

5.3 Starting point after installing BI4.0

What might be done immediately after installing BI4.0? After installing BI4.0 with any SP or patch, the steps below shouldbe considered as an initial configuration. These steps are based on cloning. By creating new servers, the same result canbe obtained.

Make sure all APS-services are always available in an APS, no matter when it’s running, disabled or stopped. The core-APS-services are always needed!

It is not recommended to remove or delete unused services from the system. Services that are not currently in use may

later be needed as business processes evolve and new features are required.

Before creating any additional APS servers, it is recommended to analyze what tools will be used in the BI4.0environment. The final configuration is highly dependent on the individual customer requirements.

The steps below will propose a change of Xmx parameter values. There is no need to change the Xms parameters. Keepthe default Xms value.

5.3.1 CLONE the original Adaptive Processing Server (APS)

This best practice is added here, after discovering that many customers modified, corrupted or even deleted the originalAPS, and could not revert back to the original settings. It is better to keep the original APS for further use. Therefore, stopthe original APS and disable it.

After the BI4.0 installation, for each node, one AdaptiveProcessingServer is found in CMC / Servers / Nodes.

CLONE the original AdaptiveProcessingServer.

STOP the original APS and put the start-up type to manual.Uncheck the checkbox: “Automatically start this server when the SIA starts ”.

5.3.2 Add a dedicated APS for DSL BRIDGE Service

This APS will optimize BICS connectivity for Webintelligence and will handle UNX SQL/LOV generation for relationalsources. This APS will only work optimal when sufficient memory is allocated. This service is not used by Crystal Reports2011 nor by for Crystal Reports Enterprise.

CLONE the original APS Include following Services in this APS:

o DSL Bridge Service o Web Intelligence Monitoring Service: is a default service of this APS o Security Token Service; o Trace log Service: default service

Remove all other services

Change Xmx1g to something between Xmx4g or Xmx8g, depending on your deployment

5.3.3 Add a dedicated APS for SEARCH Index

CLONE the original APS Include following Services in this APS:

o Platform Search Service o Trace log Service: default service

Go to the Application area of the CMC, choose the “Platform Search Application”: o Change Level of indexing to “Platform Metadata”o Set action for Error Recovery to “Rebuild Index” o De-select Content type “Universes”





th , 2012


© 2012 SAP AG 13

If this APS for Search is intensively used, change Xmx1g to Xmx2g or Xmx3g, depending on yourdeployment

To avoid using Search on content in BI Launchpad, stop this APS.

5.3.4 Add a dedicated APS for ANALYSIS (Multi Dimensional Analysis Service - Analysis for OLAP)

If the applications, “Analysis for OLAP” or “BEx Web”, are not used, this step can be skipped.This service is also used to create and edit OLAP connections.

CLONE the original APS

Include following Services in this APS:

o Multi Dimensional Analysis Service o BEx Web Application Service o Trace log Service: default service


If this MDAS is intensively used, change Xmx1g to something between Xmx4g or Xmx8g, depending onyour deployment

5.3.5 Add dedicated APS for ALL OTHER NECESSARY Services

CLONE the original APS Remove following Services in this APS (since they got a dedicated APS already):

o Multi Dimensional Analysis Service o BEx Web Application Service o Platform Search Service o DSL Bridge Service o Remove all other services not necessary for your deployment

Change Xmx1g to something between Xmx2g or Xmx4g, depending on your deployment




th , 2012


© 2012 SAP AG 14

6 Other APS servers to consider

Before creating any additional APS servers, it is recommended to analyze what tools will be used in the BI4.0environment. The final configuration is highly dependent on the individual customer requirements.

6.1 Separate APS for DSLBridge Service

DSL Bridge Service is required whenever a document based on UNX or BEx query is refreshed. Purpose of this service:

SQL Generation through the new UNX for relational sources

Retrieve List of Values (LOV) with UNX/BICS

BICS Connectivity, fetching data from BW

By default, this service is put together inside a common Adaptive Processing Server. This default server is a java basedserver containing many other services. Its default settings, in particular its java heap size, are usually not well adapted foroptimized performance. Therefore, we recommend doing the following actions:

6.1.1 DSL component in Crystal Reports for Enterprise and Dashboards

SAP Crystal Reports for Enterprise is a newly designed version of the Crystal Reports designer. It provides better supportfor the SAP BusinessObjects Semantic Layer (UNX), and allows better connectivity to SAP BW.

The Crystal Reports for Enterprise (C4E) architecture is very different from Web Intelligence.

C4E has an embedded DSL component (developed in Java). Therefore, C4E does not use the DSL Bridge Service in theAPS.

The C4E engine runs DSL component and the Connection Server locally in the same process as theCrystalReportsProcessingServer.

As a consequence, separating the DSL Bridge Service from the APS, and increasing the Java Heap Size (Xmx) will nothave any impact or improvement on the use of C4E.

For C4E, the Xmx parameter can be increased directly on the CrystalReportsProcessingServer “Java Child VMArguments” as explained in SAP Note 1697105.

The behavior for the Dashboards (Xcelsius) Application and the DashboardsProcessingServer is identical as for C4E:

an embedded DSL and Connection Server component

Xmx parameter to be modified on the DashboardsProcessingServer “Java Child VM Arguments”




th , 2012


© 2012 SAP AG 15

6.1.2 Isolating DSLBRIDGE:

BICS client natively has to handle a large amount of data in through the DSLBRIDGE process. For an extensive usage, itis recommended to have it isolated from the default Adaptive Processing Server:

1. Open CMC,2. Stop APS,3. Remove the DSLBridge Service from APS,4. Create a new Server with DSLBridge service:

a. Service Category: Connectivity Servicesb. Service: Adaptive Connectivity Servicec. Selected Service: DSL Bridge Service.

5. Name it (e.g.: “Adaptive Processing Server DSLBRIDGE_1”).

The DSL Bridge APS will contain the following services:

DSL Bridge Service

Web Intelligence Monitoring Service

Security Token Service

Trace log Service

The next step is to set the new DSLBRIDGE with proper parameters to avoid memory starvation (JVM out of memory or

excessive GC activity).

6.1.3 Memory options for DSLBRIDGE:

The minimum recommended heap size is 4GB (-Xmx4g –Xms1g). When using complex queries (with many metadataobjects) and/or high volume of row set (number of cells requested), it is wise to extend the heap size beyond 4GB.

In practice, proceed as below to modify the DSLBRIDGE options:

1. Log into CMC2. Edit the properties of the DSLBRIDGE server3. Add the following to the command line field:

-Xmx4g

The value of heap size (-Xmx4g) should be adapted to your need: between-Xmx4g.and –Xmx8g

4. By default, the heapsize (-Xmx and -Xms) are already set in the APS command line field. Forconvenience, you can copy/paste the whole command line in notepad and make the modification. (cfr.example below). Each APS has its own unique command line. Don’t reuse identical command lines for multiple different APS’s.




th , 2012


© 2012 SAP AG 16

6.2 Separate APS for Search Service

After creating a dedicated APS for Search, go to the Application area of the CMC; choose the “Platform SearchApplication”:

1. Level of indexing change defaults from Full Content to “Platform Metadata” or “Platform and DocumentMetaData”

2. If possible, change the crawling frequency from continuous to scheduled crawling.3. De-select Content type “Universes”

(cf.: https://service.sap.com/sap/support/notes/1704698)

4. Set action for Error Recovery to “Rebuild Index” 5. If necessary, set some documents excluded from indexing…

The APS for SEARCH will contain the following services:

Platform Search Service

Trace log Service

https://service.sap.com/sap/support/notes/1704698







th , 2012


© 2012 SAP AG 17

6.3 Separate APS for Analysis

When using the client tool “Analysis for OLAP” intensively, add a dedicated APS for MDAS ( Multi Dimensional AnalysisService)

If this MDAS APS is intensively used, change Xmx1g to something between -Xmx4g and -Xmx8g

The APS for ANALYSIS will contain the following services:

Multi Dimensional Analysis Service;

BEx Web Application Service;

Trace log Service"

6.4 Separate APS for Life Cycle Manager (LCM)

If LCM is intensively used in a multi-platform environment (DEV, TEST, PROD) is recommended to create an“Adaptive LCM Processing Server” and isolate the following services:

LifeCycle Management Service

LifeCycle Management Clearcase Service

Visual Difference Service

Trace log Service

This LCM-APS is responsible for handling the overrides functionality in LCM. It creates the overrides databaseduring initial startup and sets the DB_CREATED flag to true in its metadata in CMS System Database.

It is possible that sometimes, the LCM overrides database [apache derby] gets corrupted due to issues with usingmixed patch levels or connection caching issues or even multiple APS pointing to the same overrides database.In such cases, even if it is not intended to override a connection, LCM may think that the object (Crystal or WebI)connections need to be overridden and result in modified or missing connections which are wrongfully overriddenin target system.

In these scenarios, it is required to reset the LCM overrides database to clear corruption.

As there is no automated method to do this, SAP Support can provide you with the script: “ResetLCMDB.zip”. The java utility sets the DB_CREATED flag to false. Then, when the LCM-APS is re-started, it will create the DBagain. It’s recommended stopping the LCM_APS before running the script and starting it again afterwards. Whenrunning the utility, make sure the CMS is running.

If DB_CREATED flag is set to true then it will not try to create the DB again even if the flag is missing. This cancause a problem if you manually delete the LCMOverride directory.

Due to an issue with the overrides database, it is not possible to run multiple LCM-APS servers pointing to thesame overrides database at the same time.

This is to prevent a Java Null Pointer Exception when using the LCM overrides functionality.

Another issue can occur with LCM overrides as described in SAP Note 1752843. The APS containing the LCMservices should have the default name “AdaptiveProcessingServer”. If that is the case, rename the default APS toAdaptiveProcessingServer_ORIG and rename the LCM-APS to “AdaptiveProcessingServer”

For LCM, minimum use at least BI4.0 SP02 patch 10 or above




th , 2012


© 2012 SAP AG 18

6.5 Configure the APS to handle concurrent publications.

Recommendations:The following recommendations can improve the performance of the Adaptive Processing Server dealing withPublications:

If several publications are running concurrently, create multiple instances of the Adaptive Processing Server. Ingeneral, it is recommended that you have one Adaptive Processing Server instance for every three concurrent

publications. Increase the heap size for the Adaptive Processing Server. To do this, click Manage > Properties, and add the

following to the command-line parameter: -Xmx1024M.

Run the Publishing Service and Publishing Post-Processing Service on different instances of the AdaptiveProcessing Server.

Adaptive Processing Servers for Publications will contain the following services:

Publishing Post Processing Service;

Publishing Service;

Trace log Service

Resolving “Out of memory” errors

If the publisher receives the error message “ java.lang.OutOfMemoryError: unable to create new native thread when a high-volume publication is run ” , it is because the Adaptive Processing Server and Publishing Service have insufficientstack memory to handle the number of Publishing threads that are generated. This error can occur if stack memory isdesignated as Java heap space.

You can set a thread limit for the Adaptive Processing Server. In the "Servers" area of the CMC, select the AdaptiveProcessing Server and go to Manage > Properties. In the Command Line Parameters field, enter the following commandline parameter:

-Dcom.businessobjects.publisher.threadpool.size=threadlimitnumber Replace threadlimitnumber with the thread limit number that you want.

If the publisher receives the error message “ java.lang.OutOfMemoryError ” : Java heap space when you run a high-volumepublication, it is because the APS has insufficient heap space. In the "Servers" area of the CMC, select the AdaptiveProcessing Server and go to Manage > Properties. In the Command Line Parameters field, change the number in thecommand-line parameter - Xmx1024m to a larger number (for example, -Xmx2048m).

Note:In some cases, you may have to create more instances of the Adaptive Processing Server to resolve “Out of memory”errors.

6.6 Separate APS for Heavy Visualisations (Charting)

The same out of memory errors can occur when using chart-heavy reportsRecommendations:

The following recommendations can improve the stability of chart-heavy reports (Webintelligence or Crystal forEnterprise):

Create a new instance of the Adaptive Processing Server.

Increase the heap size for the Adaptive Processing Server. To do this, click Manage > Properties, and modify thefollowing to the command-line parameter: -Xmx2g.

Increase the number of visualization APS if needed.

Adaptive Processing Servers for Heavy Charting will contain the following services:

Visualization Service




th , 2012


© 2012 SAP AG 19

Trace log Service

6.7 Other APS to consider

Dedicated APS for Client Auditing. Useful to ensure Client tools / CMC / BI Launchpad perform properly, whileexecuting Client Auditing (See Auditing section of Administrators Guide: xi4sp4_bip_admin_en.pdf)

Dedicated APS for DataFederation Service and Adaptive Connectivity Service.This will also decouple service categories. This way stopping WebI services will not cause other (CR, etc.)

services to stop working because connection service is not available.

Dedicated APS for Security Token Service. Issues with Single Sign On to SAP BW could be resolved with adedicated APS for STS.

6.8 Separate APS for unnecessary Services

All services, that are not immediately required, can be grouped in a dedicated APS.

You might consider stopping this APS.

For example when not using BEx Web Application, not Publications, then gather all the services in one single APS andstop this APS. This is to avoid unnecessary memory and CPU consumption.

6.9 Keep the original APS

Leave the original APS as it is. Do not remove any services. Stop and disable this APS. Set the start-up parameter to“Manual”. To do this, click Manage > Properties in the CMC and uncheck the checkbox: “Automatically start this server when the SIA starts ”. Re-use the original APS by cloning.

6.10 General APS recommendations

It is better to clone an existing APS instead of creating a brand new one. Cloning keeps the default settings.

While after creating a new APS, default settings have to be manually entered.

When increasing the heap size, you have to make sure there is enough physical memory on the machine.Otherwise the jvm process could crash or/and memory goes on disk swapping. That would result toapplication errors and bad performance.

Default parameter: -XX:+ExitVMOnOutOfMemoryError will force an automatic restart of the APS when an OutOf Memory error occurs

-XX:+UseParallelOldGC use the parallel old generation garbage collector. Certain phases of an oldgeneration collection can be performed in parallel, speeding up an old generation collection.

Warning: In other documents / websites / notes, the parameters below might be considered. The use of these options is

absolutely NOT recommended by SAP .Avoid the use of these options, as they will cause failure of the APS server (crash):-XX:+UseParNewGC - XX:+UseConcMarkSweepGC - XX:+UseAdaptiveSizePolicy

There is no generally applicable "Best Practise” for these parameters.




th , 2012


© 2012 SAP AG 20

6.11 Command Line Parameters

When deploying a new APS on a node (either by copying an existing APS using the server clone command or by creating one) you must inspect the APS Command Line Parameters:

-Djava.awt.headless=true "-Dcom.businessobjects.datafederator.server.home=E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects EnteXI 4.0/java/pjs/services/DataFederatorService/resources" " -Dbusinessobjects.logs.home=E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObEnterprise XI 4.0/logging/" "-XtraceFile=E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI4.0/logging/[email protected]" -XX:MaxPermSize=256m "-Dbobj.javaserver.home=E:/Program Files (x86)/SAPBusinessObjects/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/" "-Dbobj.enterprise.home=E:/Program Files (x86)/SAP BusinessObjects/SA

BusinessObjects Enterprise XI 4.0/" -XX:LogGcMaxFileCount=3 -XX:+PrintGCTimeStamps "-Dbusinessobjects.connectivity.directory=E:/Program Files(x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer" -XsapSystem:08 "-XX:ErrorFile=E:/Program Files(x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI4.0/logging/AdaptiveProcessingServer_DSL_TOKEN/aps_NTBIT20.AdaptiveProcessingServer_dump_%p.log" -XX:+HeapDumpOnOutOfMemoryError "XX:HeapDumpPath=E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/ logging/" -XX:+ExitVMOnOutOfMemoryErroDjava.io.tmpdir=E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/ java/pjs/container/temp" "-XX:GCHistoryFilename =E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI4.0/logging/AdaptiveProcessingServer_DSL_TOKEN/aps_NTBIT20.AdaptiveProcessingServer_gc.prf" "-Dboe.external.dir=E:/Program Files (x86)/SAPBusinessObjects/SAP BusinessObjects Enterprise XI 4.0/java/lib//external" –Xms32m -XX:+PrintGCDetails -XX:+UseParallelOldGC "-Dboe.bundles.dir=E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/java/lib//bundles" -XX:LogGcMaxFileSize=5m -XXss1M -Djava.net.preferIPv4Stack=false –Xmx8g "-Dbo_cluster.config_dir=E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterpr4.0/win64_x64/config" "-Xloggc:E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI4.0/logging/AdaptiveProcessingServer_DSL_TOKEN/aps_NTBIT20.AdaptiveProcessingServer_gc.log" -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl -server "-Dboe.common.dir=E:/Program Files(x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/java/lib/" " -Djava.library.path=E:/Program Files (x86)/SAP BusinessObjects/SAPBusinessObjects Enterprise XI 4.0//win64_x64" -jar "E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI4.0/java/pjs/container/bin/boeserver.jar" -workdir "E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI4.0/java/pjs/container/work/NTBIT20.AdaptiveProcessingServer"

1. Make sure that some of the paths are unique (not the same as on another APS on the same server node).Parameters to check on all APS instances:

-XtraceFile=”"

-XX:ErrorFile=”"

-XX:GCHistoryFilename=”"

-Xloggc:

-workdir

For all these parameters, make sure the paths are different. The paths should be different by default from BI4.0SP02 patch 2.12 forward.

2. The parameter “-Dbusinessobjects.connectivity.directory'” on the Adaptive Processing Server hosting theDSL Bridge service can be missing. Generally this can happen after applying a patch.(see SAP Note 1735431)

This will cause the error message:"The datasource cannot be generated for the specified datasource name"xxx".(WIS 00000) when selecting a universe (UNX) in Webi

Resolution:

Create a new temporary Adaptive Processing Server (APS) hosting the DSL Bridge Service from CMC.

Copy the parameter "-Dbusinessobjects.connectivity.directory" from this temporary APS add it to theoriginal APS command line.

e.g.:"-Dbusinessobjects.connectivity.directory= E:/Program Files (x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0//dataAccess/connectionServer"

Restart the APS hosting the DSL Bridge Service

Remove the temporary APS




th , 2012


© 2012 SAP AG 21

6.12 Overview of available JVM –X parameters

-Xmixed mixed mode execution (default)

-Xint interpreted mode execution only

-Xbootclasspath: <directories and zip/jar files separated by ;>

set search path for bootstrap classes and resources

-Xbootclasspath/a: <directories and zip/jar files separated by ;>append to end of bootstrap class path

-Xbootclasspath/p: <directories and zip/jar files separated by ;>

prepend in front of bootstrap class path

-Xnoclassgc disable class garbage collection

-Xincgc enable incremental garbage collection

-Xloggc: <file>

log GC status to a file with time stamps

-Xbatch disable background compilation

-Xms<size> set initial Java heap size, usually keep the default setting inAPS

-Xmx<size> set maximum Java heap size

-Xss<size> set java thread stack size

-Xprof output cpu profiling data

-Xfuture enable strictest checks, anticipating future default

-Xrs reduce use of OS signals by Java/VM

-Xcheck:jni perform additional checks for JNI functions

-Xshare:off do not attempt to use shared class data

-Xshare:auto use shared class data if possible (default)

-Xshare:on require using shared class data, otherwise fail.

The -X options above are non-standard and subject to change without notice.




th , 2012


© 2012 SAP AG 22

7 Configuring, monitoring and tracing APS

7.1 Analyzing APS memory consumption by Heap Dump generation

In order to find the biggest memory consumer in your APS process, you will need to have a heap dump.

A heap dump is a file that contains a snapshot of the memory allocated by the Java Virtual Machine.

The steps below are usually executed by or with the assistance of Engineers from SAP Support.

7.1.1 Heap Dump generation:

If the process is reaching OOM (OutOfMemory) , it will generate a heap dump file automatically in “C: \ProgramFiles (x86)\BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\logging"With the name java_pid[pid].hprof,e.g: java_pid3736.hprof

If the process is not reaching OOM, then you can generate manually a heap dump file :

Choose in CMC->Servers and find the PID of the culprit server, e.g.: PID 10936

Start a command line tool:

cd “C: \Program Files (x86)\BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\sapjvm\ bin”

jmap -dump:file=c:\dumpdemo.hprof 10936

7.1.2 Using MAT to Analyze SAP ME Heap Dumps:

Once the heap dump file is generated (hprof extension), it can be analyzed by using the Memory Analysis Tool:

http://www.eclipse.org/mat/

https://wiki.wdf.sap.corp/wiki/display/METG/METG+-+Using+MAT+to+Analyze+SAP+ME+Heap+Dumps

https://wiki.wdf.sap.corp/wiki/display/BOBJCAS12Y/WebIntelligence+troubleshooting#WebIntelligencetroubleshooHeapDumpgenerationonaspecificWebIntelligenceBICSworkflow

7.2 Stop unnecessary servers

Example: when using Interactive Analysis (Webi) over SAP BICS connection, you basically need following BI4.0processing servers:

Central Management Server (CMS)

InputFileRepository Server

OutFileRepository Server

WebIntelligence Processing Server

One or more Adaptive Processing Servers with:i. Visualization Service (for charts rendering in WebI reports).ii. DSLBridge Service.iii. Data Federation Service (DF) if Multi-Source Universes are used.iv. MDAS Service to create, edit and modify OLAP connections.

By default, The BI4.0 platform starts automatically all servers. In case you don’t need all of them, you may switch them offto save memory and CPU resources.

For instance, if you don’t need Crystal Reports, you can shut down CrystalReport* servers. This is useful in a testenvironment when you have little system resources to be shared.

This is just an example on how customers could potentially save memory and CPU. Please work with local SAP BO BI4.0consultants for a recommendation on what services can be stopped.





https://wiki.wdf.sap.corp/wiki/display/BOBJCAS12Y/WebIntelligence+troubleshooting#WebIntelligencetroubleshooting-HeapDumpgenerationonaspecificWebIntelligenceBICSworkflow












th , 2012


© 2012 SAP AG 24

UNIX You will need to edit the .registry file for BI 4.0 which is located in the

following path (the OS in this example is RedHat):

INSTALL_BASE_DIR/sap_bobj/data/.bobj/registry/64/software/sapbusinessobjects/ suite xi 4.0/default/webintelligence/calculator

Add the two keys to the .registry file with the values as determined by the formulasabove:

BICSResultChunkSize= X (where X is determined by the above formula)

BICSLOVChunkSIZE=Y (where Y is determined by the above formula)

Caution: Setting a high value for those parameters might cause out of memory issue. That is especially true when youwork in WebI Rich Client (32 bit runtime).

7.5 Adapting the parameters for LOV chunk size

The term of LOV (List of Values) concerns:

- The values shown in a prompt panel (BEx Variables – Characteristics Values),- The values shown in a Member Selector (Hierarchy nodes and leafs).

To improve performance with large LOV, three parameters can be modified on in different levels.

7.5.1 For Interactive Analysis Desktop (i.e. WebI Rich Client):

The parameter WebIParamMaxLOVSize is stored in the file \SAP BusinessObjects Enterprise XI 4.0\ platform \config\ WebIContainer_ClientDescriptor.xml:

This parameter allows WebI Rich Client to limit the number of LOV rows that are retrieved from DSL.




th , 2012


© 2012 SAP AG 25

7.5.2 For WebIntelligenceProcessingServer:

At the BI4.0 server side, the equivalent parameter is “Maximum List of Values Size”, property of WebIntelligenceProcessingServer in CMC:

7.5.3 For DSL-BICS layer:

At the BI4.0 server, DSLBRIDGE side, the parameter BICSLOVChunkSize can be changed. It determines the size ofpackets sent from Java stack to C++ stack in DSL component. This size is the maximum number of members to send inone trip.

This parameter in the registry:[HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\default\WebIntelligence\ Calculator]

"BICSLOVChunkSize"="60000"




th , 2012


© 2012 SAP AG 26

Below a picture is shown, describing the architecture.

Adaptive Processing Server

WebIntelligence IAD

Cube

DSL Java

DSL C++

NetWeaver BW

WebIntelligence Processing Server

Cube

DSL Java(DSLBridge service)

DSL C++

NetWeaver BW

BICS + JCo BICS + JCo

IAD InfoView

*IAD = Interactive Analysis Desktop (= new name for Webi Rich Client)

It is wise to set those three parameters to small values (<1000) in the following situations:- User is not inclined to browse long list with large LOV. He prefers rather using the search feature (see

above section).- Save memory – retrieving large list will cause large memory footprint in WebI Rich Client. It is typically

true when you run a very large report and WebI Rich Client cannot afford a heapsize over 2GB due to its32 bits implementation.

Reversely, we can increase those three parameters to high values (>50000) in the following situations. That willhelp DSL and WebI to limit the number of chunk iteration.

- For some reason, user needs to load entirely large LOV.- No limit on memory resource (DSLBRIDGE is configured with large heap size).




th , 2012


© 2012 SAP AG 27

7.6 How to monitor DSLBRIDGE memory usage

A simple way to check if the DSLBRIDGE suffers from memory starvation is to visualize its GC log file. It is enabled bydefault in “C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\logging\ ”.

The filename is post fixed by _gc.log. (For example: aps_dewdftf1134as.PJS_1_gc.log).

For convenience, you can use gcviewer to view this log file:http://www.javaperformancetuning.com/tools/gcviewer/index.shtml

To install GCViewer simply download the latest version from tagtraum.com: http://www.tagtraum.com/gcviewer-download.html

To detect heap memory contention, you can observe the frequency of the full GCs.

Another way is to observe, in the GCViewer statistics view, the throughput. It is the Time percentage the application wasNOT busy with GC. A low throughput means your JVM spends hard time in recycling data.

If memory contention is detected, you can enlarge the heap size (-Xmx) of your APS containing the DSLBRIDGE Service- see section above, “DSLBridge Service (PJS)”.

Full GCs

http://www.javaperformancetuning.com/tools/gcviewer/index.shtml


http://www.tagtraum.com/gcviewer-download.html










th , 2012


© 2012 SAP AG 28

7.7 Getting Traces for investigation

Traces are a best help for SAP Support to investigate efficiently on application issue. The procedure is below:

1. Log into CMC.2. Select Servers / Servers List.3. Open the properties window of APS.4. In TraceLog section, set the log level to High:

5. Reproduce the issue.6. Collect the log files in the folder <BI4 install directory>\ SAP BusinessObjects Enterprise XI 4.0\logging\.7. On Unix machine, you can look for additional RFC trace files and core file:

o Go to <BI4 Dir>/sap_bobj/enterprise_xi40/<System>/.o List the last created files: ls -lrt

You will see core file whenever a process has crashed. Possible log files are created (*.trc, *.log).




th , 2012


© 2012 SAP AG 29

8 SAP Business Objects BI4.0 platform settings

8.1 CMS settings

Increasing instances of CMS helps improve responsiveness of BIP actions (login, logout, folder navigation). Thisis particular true for “small” queries scenario (documents very fast to refresh).

CMS database must be well tuned. With high number of concurrent users, CMS database could be intensively loadedboth in read (select) and in update statements (insert, update, delete).

The usual best practices are:

- Updates database statistics.

- Maximize cache effect to minimize IO (buffer hit ratio = 99%).

- Speedy disk access (SCSI, raid system …).

8.2 Web application server (Tomcat)

The following parameters are to be verified for the Web application Server (Tomcat):

- Maximum of possible threads (maxthread parameter in Tomcat). For Tomcat, it can be set to 900.

- JVM heapsize. For 128 users, a heapsize of 4GB is enough.Recommended options: -Xmx4g.

8.3 Avoid background activities

In case your machine has little resources in CPU or memory, you may want to avoid disturbance by background activitieswhich are turned on by default.

You can stop Platform Search indexing service (see section on Search):o Open CMCo Go to Applicationso Select Platform Search Applicationo Edit Propertieso Stop Indexingo Modify the Crawling frequency: choose “Scheduled crawling” instead of “Continuous crawling”.

You can also stop BI platform monitoring.o Open CMCo Go to Applicationso Uncheck “Enable Monitoring Application”.




th , 2012


© 2012 SAP AG 30

9 Deployment Examples

Before deploying multiple APS’s, it is important to analyze first how the BI platform will be used: which tools, whatconnectivity, Multi Source universes, publications, Auditing, LCM etc.

It is obvious that the more RAM your platform has available, the more flexibility there is in creating dedicated APS’s andcorresponding Xmx parameters. BI4.0 Hosts should not have less than 32 GByte of RAM for each Node in the Cluster,but again, this is very much dependent on each individual customer situation. A decent sizing exercise executed byqualified people should tell you in more detail the required RAM and CPU.

All of the available RAM should not be consumed by the various APS only. Leave sufficient RAM available for other BI4processes!

As many users have different needs and requirements with their deployments of BusinessObjects BI 4.0, some productsmay not be used and some services may not be needed.

The first step:

identify the products that you will be using.

The table in section 4 “Adaptive Processing Server Services” can help.

The second step: by looking at the following tables determine:

which APS servers you will need to create

and the max heap size (value for –Xmx) for each APS

The third step: create the necessary APS’s.

The fourth step: perform system sizing and tuning.

Note that you do not always have to run all APS’s on the same machine, but you may choose to run several APS’s on onemachine, while other on other machines.




th , 2012


© 2012 SAP AG 31

9.1 Deployment example 1

This is an example of a deployment with the full set of possible APS’s. Choose from the table the APS’s you might need.The other services can be grouped in for example “AdaptiveProcessingServerOTHER ”, as in Deployment example 2.


APS Xmx Included Services

Ada tiveProcessin ServerDSLBrid e Xmx8 "DSL Bridge Service;

This APS is imperative in all Webi deployments Web Intelli ence Monitorin Service;

Securit Token Service;

Trace lo Service"

AdaptiveProcessingServerPUBLISHING Xmx4g Publishing Post Processing Service;

Publishing Service;

Trace log Service "

AdaptiveProcessingServerWEBI Xmx4g "Rebean Service;

Web Intelligence Monitoring Service;

Document Recovery Service;

Custom Data Access Service;

Excel Data Access Service;

Trace log Service "

AdaptiveProcessingServerCHARTS Xmx2g "Visualization Service;

Trace log Service

Ada tiveProcessin ServerANALYSIS Xmx8 "Multi Dimensional Analysis Service;


Trace log Service "

Ada tiveProcessin ServerDF Xmx3 “ Data Federation Service;

Trace lo Service"

AdaptiveProcessingServerMONITORING Xmx1g “ Monitoring Service;

Trace lo Service"

AdaptiveProcessingServerCAPS Xmx512m “ Client Auditing Proxy Service;

Trace log Service"

AdaptiveProcessingServerCONNECTIVITY Xmx1g "Adaptive Connectivity Service;

Trace log Service"

AdaptiveProcessingServerOTHER Xmx1g Security Token Service;

Translation Service;

Insight to Action Service;

Trace log Service"

AdaptiveProcessingServerSEARCH Xmx3g "Platform Search Service

Trace log Service"

AdaptiveProcessingServerLCM Xmx2g "Lifecycle Management Service;

Lifecycle Management ClearCase

Visual Difference Service;

Trace log Service "




th , 2012


© 2012 SAP AG 32

9.2 Deployment example 2

This is an example of a deployment for Web Intelligence documents with BICS connectivity and Analysis Edition forOLAP. Use of UNX Universe is very limited. Focus is on Publications not on Auditing.


APS Xmx Included Services

AdaptiveProcessingServerDSLBridge Xmx8g "DSL Bridge Service;

This APS is imperative in all Webi deployments Web Intelligence Monitoring Service;

Security Token Service;

Trace log Service"

Ada tiveProcessin ServerPUBLISHING Xmx4 Publishing Post Processing Service;

Publishin Service;

Trace lo Service "

AdaptiveProcessingServerWEBI Xmx4g "Visualization Service;

Rebean Service;

Web Intelligence Monitoring Service;

Document Recovery Service;

Trace log Service "

AdaptiveProcessingServerANALYSIS Xmx8g "Multi Dimensional Analysis Service;


Trace log Service "

AdaptiveProcessingServerOTHER Xmx4g "Adaptive Connectivity Service;

Custom Data Access Service;

Excel Data Access Service;

Client Auditing Proxy Service;

Monitoring Service;

Security Token Service;

Translation Service;

Insight to Action Service;

Data Federation Service;

Trace lo Service"

AdaptiveProcessingServerSEARCH Xmx3g "Platform Search Service

Trace log Service"

AdaptiveProcessingServerLCM Xmx2g "Lifecycle Management Service;

Lifecycle Management ClearCase

Visual Difference Service;

Trace log Service "




th , 2012


© 2012 SAP AG 33

10 Additional Information

10.1 Abbreviations

Sometimes abbreviations are used in this document:

RAM: Random Access Memory. Available memory on a server or Host.

BI: Business Intelligence

BOE: Business Objects Enterprise; usually BOE is referring to the BI-platform, server or host

SAP BO BI: SAP Business objects Business Intelligence; new name for BOE BIP:Business Intelligence Platform

GB: Giga Byte or 1024 Mega Byte

GByte: Giga Byte

CMC: Central Management Console

LCM: Life Cycle Management

CR: Crystal Reports

C4E: Crystal Reports for Enterprise

10.2 SAP Notes

SAP Note 1640036 – Added memory usage when splitting Adaptive Procesing Server (APS) services

SAP Note 1717717 – How to troubleshoot high CPU consumption issues on BI 4.0

SAP Note 1621001 – Adaptive Processing Server not getting started BI4.0 SAP Note 1630185 – Adaptive Procesing Server crashes repeatedly while indexing a system to enable search

functionality in BI Launchpad

SAP Note 1694041 - BI 4.0 Consulting:- How to size the Adaptive Processing Server

SAP Note 1642935 - LCM Override settings are not working in BI4.0

SAP Note 1735431 - Error: “The datasource cannot be generated for the specified datasource name"xxx".(WIS00000).” when creating Webi report based on a .unx universe from BILaunchpad

SAP Note 1752843 - Error while using scan option within in Promotion Management in SAP BI 4.0 SP04

SAP Note 1697105 - How do I set Java settings such as Xmx for the Crystal Reports Processing Server

10.3 Pattern Books

Since setup instructions vary for different operating systems, application server vendors, and database vendors, this wikicontains end-to-end instructions for setting up various deployment scenarios in your company's environment. Eachdeployment scenario is called a pattern. Go to:

http://wiki.sdn.sap.com/wiki/display/BOBJ/SAP+Business+Intelligence+Platform+Pattern+Books







th , 2012


© 2012 SAP AG 34

10.4 BI4 Sizing Companion guide

A new version of the BI4 Sizing Companion Guide is available here : https://scn.sap.com/docs/DOC-33126

This document provides recommendations and best practices to help with deploying and scaling the various services inSAP BusinessObjects BI 4. Also, included, are information and details about the sizing tests and methodology used to

create the various sizing tools and documents in support of BI 4.

We recommend consulting this guide if you are:

Working on a sizing strategy, especially in conjunction with the BI 4 Sizing Estimator. Be sure to use the mostrecent version of the Sizing Estimator.

Planning to deploy BusinessObjects BI 4 software

Optimizing or tuning an existing BusinessObjects BI 4 deployment

For all deployments, it is necessary to consult a Sizing Expert in order to validate sizing exercises after initial planningusing the Sizing Estimator and this Sizing Guide.There may have been updates made to this document. The most recent version is always available at this location. This link is at the top of the document, so if readers are ever unsure about having the newest version, they can follow thelink in the document. The publish date of the document is on the first page.

10.5 BI4 Sizing Estimator

The Sizing Estimator has also been updated and is available here:http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1055c550-ce45-2f10-22ad-a6050fff97f1

This version of the Sizing Estimator has significantly refined data from the P&R testing team. It was used to predictexisting known good deployments and it has shown itself to be quite accurate.

This tool must be used in conjunction with the new BI4 Sizing Companion Guide so its estimates can be employedcorrectly.

The Sizing Estimator shows guidance for deployment on a single large dedicated machine.If the target landscape is not such a device, it is very important to follow the guidance of the BI4 Sizing Companion Guideto learn how to scale-out a deployment successfully.

https://scn.sap.com/docs/DOC-33126


http://www.sap.com/campaigns/benchmark/sizing_overview.epx



http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/1055c550-ce45-2f10-22ad-a6050fff97f1
























th , 2012

11 Copyright

© Copyright 2012 SAP AG. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The informationcontained herein may be changed without prior notice.

Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors.

Microsoft, Windows, Excel, Outlook, and PowerPoint are registered trademarks of Microsoft Corporation.

IBM, DB2, DB2 Universal Database, System i, System i5, System p, System p5, System x, System z, System z10, System z9, z10, z9, iSeries, pSeries,

xSeries, zSeries, eServer, z/VM, z/OS, i5/OS, S/390, OS/390, OS/400, AS/400, S/390 Parallel Enterprise Server, PowerVM, Power Architecture,POWER6+, POWER6, POWER5+, POWER5, POWER, OpenPower, PowerPC, BatchPipes, BladeCenter, System Storage, GPFS, HACMP, RETAIN,DB2 Connect, RACF, Redbooks, OS/2, Parallel Sysplex, MVS/ESA, AIX, Intelligent Miner, WebSphere, Netfinity, Tivoli and Informix are trademarks orregistered trademarks of IBM Corporation.

Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Adobe, the Adobe logo, Acrobat, PostScript, and Reader are either trademarks or registered trademarks of Adobe Systems Incorporated in the Uni tedStates and/or other countries.

Oracle is a registered trademark of Oracle Corporation.

UNIX, X/Open, OSF/1, and Motif are registered trademarks of the Open Group.

Citrix, ICA, Program Neighborhood, MetaFrame, WinFrame, VideoFrame, and MultiWin are trademarks or registered trademarks of C itrix Systems, Inc.

HTML, XML, XHTML and W3C are trademarks or registered trademarks of W3C®, World Wide Web Consortium, Massachusetts Institute ofTechnology.

Java is a registered trademark of Sun Microsystems, Inc.

JavaScript is a registered trademark of Sun Microsystems, Inc., used under license for technology invented and implemented by Netscape.

SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP Business ByDesign, and other SAP products and services mentioned herein as well astheir respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.

Business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions, Web Intelligence, Xcelsius, and other BusinessObjects products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of Business Objects S.A. inthe United States and in other countries. Business Objects is an SAP company.

All other product and service names mentioned are the trademarks of their respective companies. Data contained in this document serves informationalpurposes only. National product specifications may vary.

These materials are subject to change without notice. These materials are provided by SAP AG and i ts affiliated companies ("SAP Group") forinformational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to thematerials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying suchproducts and services, if any. Nothing herein should be construed as constituting an additional warranty.

BOBJ (SAP BI) APS Spliting Best Pra

Documents

Transcript of BOBJ (SAP BI) APS Spliting Best Pra