Biocom Catalogue Update
-
Upload
colin-keir -
Category
Documents
-
view
243 -
download
0
description
Transcript of Biocom Catalogue Update
LiquidLiquidHandling
1
■ Completely autoclavable
■ Continuously adjustable
■ Volume adjustment alsopossible via plunger pushbutton
■ Reduced spring pressuresminimise fatigue
■ Comfortable, ergonomichand grip
■ Eight different modelscovering the range from0.1µl to 10000µl
Denville XL3000i pipettes
also available for 3x pipettes
loose and racked
tips are available for Denville pipettes
•please call for
details•
Cal i bra tion Tool
now included wit
h
every pipette
NEW10ml
model
NEW
EASY-TURNvolume adjustmentwheel
AIRTIGHTSEALPTFE / O-ring 5
2
1
3
4
Volume Range Accuracy % Coeff. Variation % Cat. No.
0.1 to 2µl ±12 to 1.5 ±6.0 to 0.7 P-3950-2
0.5 to 10µl ±3.6 to 0.5 ±3.6 to 0.3 P-3950-10
2 to 20µl ±4.0 to 0.8 ±3.0 to 0.4 P-3950-20
10 to 100µl ±1.6 to 0.8 better than ±1% P-3950-100
20 to 200µl ±1.2 to 0.6 better than ±1% P-3950-200
100 to 1000µl ±0.9 to 0.6 better than ±1% P-3950-1000
1 to 5ml ±0.6 to 0.5 better than ±1% P-3950-5000
1 to 10ml ±2.5 to 0.5 better than ±1% P-3950-10ML
Pipette Stand, 4-position BC-4020 Pipette Stand, 3-position BC-4021
Ordering Information
DIGITALvolume display
SLIM HANDLEfor optimum comfort
COMPLETELYAUTOCLAVABLE
PLASTIC GRIP
for easier tipejector removal
ADJUSTABLEEJECTOR
to allow a widerchoice of tips
LIGHT WEIGHT
- up to 20% lighterthan many similar
models
EJECTORBUTTON
two styles tomaximise
individual comfort
ADUST VOLUMEvia enlarged plungerbutton
Eight models of Denville XL3000i™ Pipettes cover all volumes from 0.1µl up to 10ml. A continuouslyadjustable volumeter with digital readout allows simple and accurate dispensing. The robust constructionalong with the low thermal coefficient of the body of each XL3000i™ will prevent hand heat affectingsample measurements and reproducibility, even in prolonged usage. Being lighter than many othersimilar pipettes, they are even more comfortable to hold and operate for extended periods - even in thesmallest hand. This feature will also reduce the incidence of operator fatigue and Repetitive Strain Injury.
The XL3000i™ requires minimal maintenance. Its precise, self-locking stainless steel micrometeraccurately adjusts the stroke of the polished, acid-resistant stainless steel piston. Each piston ismachined to very fine tolerances which, in conjunction with its self-lubricating O-ring and PTFE seal,minimises the need for attention. Using a series of height adapters, the tip ejector position on the shaftis adjustable to allow the pipette’s use with virtually all brands of tips. The user may also choose fromeither of the two supplied ejector button styles to suit their preferred handling position.
Each model is supplied with its own individual certificate of calibration, as a guarantee of the unit’s quality.
Comprehensivespares
Easy removal oftip ejector
2
3
4
5
Conventionalholding style -
standard ejectorbutton
Volume adjustmentusing the largeplunger button
Side holding style- large ejectorbutton for in-
creased comfort
Easy read digitaldisplay
2
1
LiquidLiquidHandling
2
Denville XL3000i multi-channel pipettes
loose and racked
tips are available for Denville pipettes
•please call for
details•
■ Completely autoclavable
■ Volume adjustment nowpossible via plunger pushbutton as well as ‘thumb-wheel’
■ Reduced spring pressuresminimise fatigue
■ Lightweight Body
■ Rotating manifold
■ Individual precision pistons
■ Curved, low force ejector bar
Tip Ejector Bar... removes used tipswith minimal force
2
4 4
Side holding style -large ejector button
for increased comfort
Conventional holdingstyle - standard
ejector button
Easy read digitaldisplay
3
Individual channels
11
Cal i bra tion Tool
now included wit
h
every pipette
Denville’s XL 3000i Multi-Channel Pi pettes allow for com fort able pipetting by both right and left handedusers. The plunger and ejector buttons are er go nom i cal ly located and op er ate smoothly. For com fort ablepipetting in any direction, the tip manifold rotates 360º. The innova tive ejector bar is curved, al low ingthe tips to be pushed off in steps, there fore re duc ing the amount of force re quired for ejec tion.
The use of ad vanced, light weight ma te ri als (in both the body of the pipette and the piston assemblies) resultsin a pipette that will stand up to constant use, yet is easy to hold, even during ex tend ed pipetting sessions.
Each channel of the pipette has an in di vid u al, precision piston assembly to ensure accuracy andre pro duc ibil i ty from one pipetting series to the next, as well as between chan nels. The micrometer iscon tin u ous ly ad just able for selection of whole or frac tion al vol umes.
Denville’s XL 3000i Multi-Chan nel Pi pettes areavail able in 8 and 12 channel models. Fouroverlapping volume ranges are provided topre cise ly meet liquid han dling re quire mentsfrom 1.0 to 300µl.
DIGITALvolume display
ROTATINGMANIFOLDpipette andeject in anydirection
CURVEDEJECTORBARreduces theforce requiredfor tip ejection
INDIVIDUALPRECISIONPISTONS
ensure accuracyand
reproducibilitybetween
channels andpipetting series
SLIM HANDLEfor optimum comfort
3
1
2
4
EJECTORBUTTON
two styles tomaximize individual
comfort
LIGHT WEIGHT
- up to 20%lighter thanmany similar
models
EASY-TURNvolume adjustmentwheel
ADUST VOLUMEvia enlarged
plunger button
Channels Volume Range Accuracy % Coeff. Variation % Cat. No.
8 1 to 10µl ±8.0 to 2.0 <8.0 to 2.0 P3971-6
8 5 to 50µl ±3.0 to 1.0 <1.8 to 0.45 P3971-8
8 20 to 200µl ±1.4 to 0.8 <0.7 to 0.5 P3971-9
8 50 to 300µl ±1.4 to 0.9 <0.7 to 0.5 P3971-10
12 1 to 10µl ±8.0 to 2.0 ±8.0 to 2.0 P3971-11
12 5 to 50µl ±3.0 to 1.2 <2.0 to 0.5 P3971-12
12 20 to 200µl ±1.4 to 0.8 <0.8 to 0.5 P3971-15
12 50 to 300µl ± 1.4 to 0.9 <0.8 to 0.5 P3971-18
Stand 8-channel pipette P3971-21
Stand 12-channel pipette P3971-22
LiquidLiquidHandling
3
Denville XLE electronic pipettes■ Motorised piston drive
■ Minimises hand fatigue
■ Exceptional accuracy
■ Rechargeable Li-ion battery
■ Comfortable and user friendly
Denville’s XLE Electronic Pipette is fully Mo-torised to eliminate the hand strain associatedwith repetitive pipetting. It is unexpectedly lightand well-balanced, fitting naturally in either theleft or right hand. Activation of the plunger re-quires only a small, natural movement of theindex finger while the tip ejector slides easily withminimal effort from the thumb. Angled towardthe user, the large LCD is clear and easy to read.
A microprocessor controls operation of the step-ping motor which accurately and precisely drivesthe piston for aspiration and dispensing. An op-tical coupler monitors the plunger position to en-sure that movement is exactly the same everytime. The XLE is self calibrating.
Six operational modes expand the capabilities ofthe XLE beyond routine pipetting. The largescreen and simple interface allow users to easilyselect the appropriate operating parameters. Theprogram memory holds up to nine different setsof operating parameters for future recall. In orderto ensure proper operation of the XLE, the soft-ware includes a self-diagnosis program that con-stantly monitors the accuracy of volume, batterystatus and the auto-calibration function.
The XLE is available in single and multichannelversions. Both have adjustable tip ejectors andshafts designed to accept standard pipette tips.The lower portion of all the XLE models is easilyremoved for autoclaving. The XLE is suppliedcomplete with a rechargeable Lithium-ion bat-tery, a shelf clip and charging adapter. The bat-tery will hold its charge through 2,000 pipettingcycles. Recharging may be accomplished inthree hours without removing the battery fromthe pipette - simply plug the unit into the charg-ing adapter. To ensure you always have acharged unit, extra batteries and an externalcharger are available. Charging batteries in theexternal charger takes 8 hours. An acrylic standfor holding three pipettes as well as additionalshelf hangers are also available.
Supplied with shelf clip, one bat-tery and charging adapter, 230V
AUTO - Select the volume for automaticstandard and reverse pipeting.
MD - Select the volume and number ofaliquots to be dispensed for
multiple dispensing.
MIX - Aspirate and dispense a selectedvolume repeatedly to mix samples.
SD - Fill the tip and dispense differentvolumes for sequential dispensing.
SA - Aspirate different volumes with anair space in between and dispense all at
once for sequential aspiration.
SYS - Set system parameters such asaspirating and dispensing speed, audiblesignals, tip ejection alarm and add or re-
move a blow out step.
ADJUSTABLEtip ejector
LIGHT WEIGHTand well balancedfor repetitive pipet-ting
8/12-CHANNELavailable volume ranges:
0.5 - 10µl2 - 20µl20 - 200µl100 - 1200µl
MICROPROCESSORcontrols stepping motorfor accurate and preciseaspiration and dispensing
AUTOCLAVABLElower body is easilyremoved
6 OPERATIONAL MODES
LARGE LCDdisplay is clear and
easy to read
Channels Cat. No. Volume Increment Accuracy % Precision %
1 2 to 20µl 0.1µl ±5 to 1.0 ±2.0 to 0.3 P3980-20
1 20 to 200µl 1µl ±2 to 0.6 ±1 to 0.15 P3980-200
1 100 to 1000µl 1µl ±1.5 to 0.5 ±0.6 to 0.15 P3980-1000
8 0.5 to 10µl 0.1µl ±4 to 1.0 ±2.5 to 0.4 P3981-10
8 2 to 20µl 0.1µl ±5 to 1.0 ±2.0 to 0.3 P3981-20
8 20 to 200µl 1µl ±2 to 0.6 ±1 to 0.15 P3981-200
8 100 to 1200µl 1µl ±1.5 to 0.5 ±0.6 to 0.15 P3981-1200
12 0.5 to 10µl 0.1µl ±4 to 1.0 ±2.5 to 0.4 P3982-10
12 2 to 20µl 0.1µl ±5 to 1.0 ±2.0 to 0.3 P3982-20
12 20 to 200µl 1µl ±2 to 0.6 ±1 to 0.15 P3982-200
12 100 to 1200µl 1µl ±1.5 to 0.5 ±0.6 to 0.15 P3982-1200
Extra Li-ion battery P3900
Charger set, inc. charger, charging adapter, battery P3917
Shelf clip for one XLE pipette P3928
Acrylic stand for 3 single or Multichannel XLE pipettes P3930
LiquidLiquidHandling
4
Biocom offers a complete repair and maintenance service for XL3000i™ pipettes. For details oneach level of service, please contact Biocom or your local distributor.
However, simply cleaning the piston and replacing the seals may significantly improve theperformance of the pipette and extend the time between these overhauls. Cleaning should bedone using a weak cleansing solution. After dissembly, to clean the piston, wipe gently with alint-free cloth. Replace seal and O-ring with clean hands, carefully. If the tipholder is dirty, clean this also - do NOT scrape the surface as this couldaffect the holder to tip seal and therefore adversely affect the unit’sperformance.
XL3000i™ pipettes are built to the highest standards. With a little care andthe above regular maintenance, they should provide many years ofproductive service.
Developed to enhance accuracy in the critical 0 to 20µl range, the length and narrow profile ofthese gel loading tips provide easy access to small orifices. The round format models are idealfor SDS PAGE while the flat and ultra-flat, duck-billed versions are designed for sequencing gels.
The ‘extension’ portion of the Duckbill tips feature a narrow bore microcapillary with parallel wallsresembling a glass capillary, but with the added advantage of flexibility and a bevelled orifice fortotal sample recovery. Those tips with 200µI capacity (83mm) are graduated at 5µl, while thosefor 2µl and 10µl pipettes have graduations at 2µl.
Gel loading tips are available sterile, details on request.
Push Button
Ejector Button
Piston Assembly
Teflon Gasket
Pipette shaft
Shaft nut
Tip Ejector
‘O' ring
includes stainless steel
piston, integral springs,
plastic bushings/
spacers plus teflon
seal and ‘O’ ring
Microcapillary gel loading tips
Model Tip Tip Push Shaft Piston PTFE O-ring Holder Ejector Button Nut Assy Seal
2µl SP008-2LM SP010-200XL SP-001-2 SP009 SP005-2 SP006-2 SP007-2
10µl SP008-10LM SP010-200XL SP-001-10 SP009 SP005-10 SP006-10 SP007-10
20µl SP008-20LM SP010-100XL SP-001-20 SP009 SP005-20 SP006-20 SP007-20
100µl SP008-100LM SP010-100XL SP-001-100 SP009 SP005-100 SP006-100 SP007-100
200µl SP008-200LM SP010-200XL SP-001-200 SP009 SP005-200 SP006-200 SP007-200
1000µl SP008-1000LM SP010-1000XL SP-001-1000 SP009 SP005-1000 SP006-1000 SP007-1000
5000µl SP008-5000LM SP-001-5000 SP009 SP005-5000 SP006-5000 SP007-5000
Ejector button, Style 1 SP002-EB1 Ejector button, Style 2 SP002-EB2
Ordering Information
n Two styles Round or Flat(Duckbill)
n ‘Unifit’ design provides tight seal
n Complete visibility of sub-mi-crolitre volumes
n For use with 2, 10, 20, 100and 200µl pipettes
n Metal and RNase free
n Racked with removable lid
P-3
210
P-3
212
P-3
107
P-3
080
P-3
082
P-3
087 (si
de v
iew
)
Denville pipette maintenance
Ordering Information
P2/P10
P200
Round Orifice, 0.2-10µl, 0. 5mm diam. (fits 0. 7mm openings), rack/200* P-3210
Flat Orifice, 0.2-10µl, 0. 33mm diam. (fits 0. 4mm openings), rack/200* P-3212
UftraFlat Orifice, 0.2-10µl, 0.17mm diam. (fits 0.2mm openings), rack/200* P-3214
Round Orifice, 20-200µl, 1.1mm diam. (fits 1.2mm openings), rack/200† P-3107
Round Orifice, 20-200µl, 0. 5mm diam. (fits 0. 7mm openings), rack/200* P-3080
Flat Orifice, 20-200µl, 0. 33mm diam. (fits 0. 4mm openings), rack/200* P-3082
UftraFlat Orifice, 20-200µl, 0.17mm diam. (fits 0.2mm openings), rack/200* P-3087
*1x case = 4x racks †1x case = 5x racks
MicrotubeEquipment
5
Microtube
Sticky stand
Biocom MicroRacks are fabricated in durable PVC to provide robustness and long life. All threemodels are suitable for autoclaving.
CombiRack is configured in 6 rows of 12 holes. Row #1 is intended for 1.5ml microtubes while Rows#2 - 6 are for 0.5ml tubes. This layout is ideal for those using PCR® cycling instruments whichhave heating blocks to accommodate 60 tubes.
Mini MicroRacks are formed from 3mm clear acrylic sheet. Witha footprint of only 80 x 80mm, they are ideal for those whoworking with only a few samples. Additionally, having no base,tubes may be placed in direct contact with ice for sample chilling.
Sticky Stand is the ultimate Tray for securing any style of microtube, cryovial, cuvette or indeed,any kind of small vessel. Press the tube into the unique adhesive bed and twist slightly into thematerial. To remove, simply lift off - tube will be completely free of residue. A high adhesion‘Super’ option is available for use in cold rooms.
Ordering Information
Sticky Stand STF57R
Super Sticky Stand STF57SS
Ordering Information
MicroRack-60, 60 x 0.5ml, (available in blue, green, red and yellow) BC-4001
MicroRack-100, 100 x 1.5ml, (available in blue, green, red and yellow) BC-4003
MicroRack-50, 50 x 1.5ml, (available in blue, green, red and yellow) BC-4004
CombiRack, 60 x 0.5ml/12 x 1.5ml, (available in blue, green, red and yellow) BC-4017
Mini MicroRack-12, 12 x 1.5ml BC-4031
Mini MicroRack-16, 16 x 0.5ml BC-4032
Microracks are available in colour options, please specify by adding colour code to order code; B=blue, G=green, R=red, Y=yellow
microrack
combirack
n Durable PVC construction
n Autoclavable
n Alpha-numeric tubeidentification
n 6 rows of 12 holes
n Ideal for users of PCR®
technique
n Ideal for sequencing set-up
n Ideal for holding, viewing,carrying and working with smalltubes, vials and containers
n Resistant to most organicsolvents
n Adhesive bed is easily re-cycled
microrack-100
microrack-50/60
combirack
Dimensions: 80 x 80 x 40mm
Dimensions:
155 x 152 x 35mm
Dimensions:
155 x 88 x 35mm
Dimensions:
225 x 100 x 35mm
Dimensions: 150x 225mm
MicrotubeEquipment
6
n Stays cool without ice -samples will not get wet
n Maintains 0°C for up to 8 hours
n Holds 12 x 1.5ml or 2.0ml tubes
Chillette portable tube cooler
0.5ml tubeadapter
stays coldfor
8 hours
Dimensions: 105 mm ø x 118mm
Ordering Information
Chillette 12 tube cooler for 0°C, Hold time: 8 hrs R-6650
Chillette 12 tube cooler for -15°C, Hold time: 6 hrs R-6651
Holder for 0.5ml tubes, pk/6 R-6650-5
Ordering Information
Chillette 20 personal tube cooler for 0°C, Hold time: 5 hrs R6620
Chillette 20 personal tube cooler for -15°C, Hold time: 3 hrs R6621
1 2 3 4 5 6 7 8
0
-5
-10
-15
-20
-25
T
E
M
P
E
R
A
T
U
R
E(°C)
Time (hours)>48hr freeze time
1 2 3 4 5 6 7 8 9 10 11 12 13
5
0
-5
-10
-15
-20
T
E
M
P
E
R
A
T
U
R
E(°C)
Time (hours)>48hr freeze time
-15°C ChilletteSample Temperature vs. Time
0°C ChilletteSample Temperature vs. Time
0 1 2 3 4 5 6 7
5
0
-5
-10
TEMPERATURE
(°C)
Time (hours)
0°C Chillette 20 (R6620)Sample Temperature vs. Time
0 100 200
-5
-9
-13
-17
-21
-25
TEMPERATURE
(°C)
Time (minutes)
-15°C Chillette 20 (R6621)Sample Temperature vs. Time
inside rowoutside row
Chillette 20 coolers provide safe storage for PCR re agents, cells, enzymes, etc. Simply place it in afreezer over night and it’s ready to stay cold on the bench for hours. Chillette 20 is stackable andits small footprint re quires little freezer space. Its re vers ible format accepts 0.5ml tubes onone side and 1.5ml to 2.0ml tubes on the flip side. Dimensions: 4.25 x 6.5 x 4” (108 x 165 x102mm)
Chillette 20 portable tube cooler
n Up to 5 hours of cold storage
n Reversible.....holds 20 tubes (0.5ml or 1.5/2.0ml)
Chillette™ is a highly effective benchtop tube cooler small enough to fit in the palm of a hand. Inaddition to bottom and side insulation, Chillette also has a screw cover filled with liquidrefrigerant which sends cold air down to the samples inside. After being kept in a -20°C freezerovernight, the 0° Chillette will keep samples at 0°C or below for over 8 hours. The -15°C versionwill maintain between -5° and -20°C for 6 hours. With a size of only 105 x 118mm, it is ideal fortransporting samples. Chillette is leakproof, requires no ice, and won’t wet the tubes or samples.
MicrotubeEquipment
7
n Digital display of time and speed
n Exceptionally quiet - brushless motor, 55dBA
n Unique self-cooling, ventilation system
n Cold room compatible
n Choice of 18-place or 24-place rotors
n Adapters for 0.2ml and 0.5ml tubes
n Two year warranty
The NEW Denville 260D incorporates all the most requested features in a single affordablemicrocentrifuge. The 260D is the quietest centrifuge in its class when used with either of its 45°angle rotors. These 45° angle rotors accept all types of 1.5ml and 2.2ml tubes, including screw-top and self-standing "skirted" tubes. A new strip rotor accepts 0.2ml PCR 8-strips or standard1.5ml tubes. All angle rotors are autoclavable and are supplied with a polypropylene cover that“snaps" on or off easily with one hand.
With its efficient ventilation system, the unit remains cool during repetitive and prolongedoperation. Incorporating a self-cooling ventilation system, even after successive 30 minute spins,sample temperature will not increase by more than 4°C. The 260D may be used in a cold room.
Digital display of time and speed with simple "one touch" keypads make setting of parametersquick and effortless. Speed may be shown in rpm or RCF (g-force) at the touch of a button. The260D may also be used for limited or momentary spins, generating up to 16,000xg (14,000rpm).
The 260D series is covered by a two year warranty.
2 yearwarranty
Ordering Information
Microcentrifuge with 18 tube angle rotor, C-0260D-18
(14,000 rpm/16,000 xg max.) r=7.3cm.
Microcentrifuge with 24 tube angle rotor, C-0260D-24
14,000rpm max (two rows of 12 tubes)
Adapters for 0.5ml tubes, pk/6 C-1205
Adapters for 0.2ml PCR tubes, pk/6 C-1222
Optional 2x 8-strip 45° angle rotor for 0.2ml and 6x1.5ml tubes C-0260-ST
(13,000 rpm/13,225 xg max.) r=7cm.
Optional 24 tube 45° angle rotor, C-0240-2R
(14,000rpm/16,000 xg max - two rows of 12 tubes)
(Outer: 14,000 rpm/16,000 xg max., r=7.3cm.) (Inner: 14,000 rpm/14,024 xg max., r=6.4cm.)
Denville 260D digital microcentrifuge
Speed: 500 to 14,000 rpm
Max. RCF: 16,000 xg
Speed increments: 100 rpm
Timer: 0.5-99 minutes with hold
Noise level: 55dBA
Dimensions: 23 x 29 x 19cm
Weight: 5.9 kgs.
Acceleration (18 pl./24 pl.): 13 sec.
Deceleration: (18 pl./24 pl.): 10 sec.
Technical Specifications
please call for details
on 0.5ml and 1.5mlmicrotubes plus 0.2ml PCR tubes,
strips and plates
18 tube rotor Strip tube rotor 24 tube rotor
rotor options
MicrotubeEquipment
n Ideal for low temperaturestorage
n Suitable for 0.5ml and 1.5mlmicrotubes + 2.0ml cryotubes
n Ideal low cost transportation
n Compact design – 185 x 110 x 60mm
Lid
Insert Tray
Base
Eprak low cost tube storage
n Removable Insert Trayfloats in water bath
n Defrosts or incubates tubecontents
n Inserts can easily betrimmed to a smaller size
n Expanded polystyrene al-lows controlled tempera-ture changes
n Can be used with crushedor dry ice, water and liquidnitrogen
The Eprak is a low cost multi-purpose box manufactured in expanded polystyrene.
With its removable Insert Tray, it is ideal for use as both a work station and storage box formicrocentrifuge tubes, of both 1.5ml (50) and 0.5ml (72) capacities as well as 2.0ml cryotubes (36).
Eprak can be used along with either liquid nitrogen or dry ice for flash freezing of samples, orthe expanded polystyrene Insert Tray can be floated in a thermostatically controlled bath to allowdefrosting or incubation of tube contents.
Ordering Information
EPRAK, case quantity 30 pieces (Base, Lid and Insert Tray)
with 1.5ml Microtube Inserts, pk/30 BC-5003
with 0.5ml Microtube Inserts, pk/30 BC-5004
with 2.0ml Cryotube Inserts, pk/30 BC-5008
replacement 1.5ml Insert Trays, pk/30 BC-5005
replacement 0.5ml Insert Trays, pk/30 BC-5006
BenchTidy™ Storage Boxes are functional acrylic boxes for safe storage of pipette tips, glassvials, septa, syringe filters, microcentrifuge tubes etc... Fabricated from sturdy 3mm thick,acrylic, each unit has robust hinged lids for rapid filling and dispensing. They are now availablein the original clear acrylic or in Daglo ‘fluorescent’ multi-coloured acrylic.
The new Rack’em-Up BenchTidy™ is based on the original BenchTidy with the addition of aconvenient integral pipette support. Available in the 3 and 4 compartment format, each dispenserhas a detachable 3 place pipette support, designed to hold Denville XL3000i™ and most leadingbrands of single channel pipette. Rack’em-Up BenchTidy™ is available in three bright Daglocolours; red, yellow and blue.
BenchTidy 2-Compartment 3-Compartment 4-Compartment 14 x 16 x 36.5cm 21 x 16 x 21cm 29 x 16 x 21cm
Clear RBT010 RBT012 RBT020
Multicoloured RBT210 RBT212 RBT220
Rack ‘em-Up Red Yellow Blue
3-Compartment, 21 x 16 x 21cm RBT112R RBT112Y RBT112B
4-Compartment, 29 x 16 x 21cm RBT120R RBT120Y RBT120B
Ordering Information
Original Clear
Rack ‘em-Up
MultiColoured
BenchTidy™ storage
accessories
9
Tough-Tag™ labelling systemsStandard Tough-Tags™ are manufactured in chemically inert polyester and have a strongadhesion to all plastics and other materials. Unlike conventional tape or paper materials, theselabels will withstand steam-autoclaving, boiling water baths, freezing to -20˚C*, plus brief contactwith organic solvents and caustic agents without peeling.
Convenient and Quick - Simply mark the matt label with a lab marker, peel it from the releasepaper, and press it on to the tube.
Centrifuge and Vortex Compatible - Microcentrifuge tubes with wrap-around labels slideeasily in and out of rotors without binding. they are ideal for use with all brands of centrifugalfilters and concentrators. Tough-Tags are scuff and smear resistant, and cannot be removed byeven the most vigorous shaking or vortexing.
Durable - Unlike paper and many other label materials, this advanced polyester material will notdry out or fall off.
Coloured - Available in white, clear and a variety of bright colours forconvenient identification of tubes and samples.
Sizes - Various sizes are available to suit the application.
Formats - Tough-Tags™ are available in rolls or in sheet form for theprocessing of large numbers of samples using a laser or inkjet printer.
Microtube tough-tags™ labelsMicrotube Tough-Tags™ are designed for all types of microcentrifuge tubes and vials. They areavailable in clear, white and a variety of colours in two sizes, small and large.
General Purpose Tough-Tags™ in white, are sized to fit a variety of laboratory containers, suchas 50ml plastic centrifuge tubes or glass test tubes.
BioLab
Hot Cold
Wet DRy
Ordering Information
Tough-Tags™, White, general purpose, 38 x 19mm, roll of 1000 TTGP1000
Tough-Tags™, Clear, small, 24 x 12.5mm, roll of 1000 TTSC1000
Tough-Tags™, White, small, 24 x 12.5mm, roll of 1000 TTSW1000
Tough-Tags™, Red, small, 24 x 12.5mm, roll of 1000 TTSR1000
Tough-Tags™, Yellow, small, 24 x 12.5mm, roll of 1000 TTSY1000
Tough-Tags™, Blue, small, 24 x 12.5mm, roll of 1000 TTSB1000
Tough-Tags™, Green, small, 24 x 12.5mm, roll of 1000 TTSG1000
Tough-Tags™, Clear, large, 32 x 12.5mm, roll of 1000 TTLC1000
Tough-Tags™, White, large, 32 x 12.5mm, roll of 1000 TTLW1000
Tough-Tags™, Red, large, 32 x 12.5mm, roll of 1000 TTLR1000
Tough-Tags™, Yellow, large, 32 x 12.5mm, roll of 1000 TTLY1000
Tough-Tags™, Blue, large, 32 x 12.5mm, roll of 1000 TTLB1000
Tough-Tags™, Green, large, 32 x 12.5mm, roll of 1000 TTLG1000
Sidewall tough-tags™ labelsSidewall Tough-Tags™ are slender pre-cut 38 x 6mm labels designed for the sidewalls ofmicrotitre plates, petri dishes and other containers. These labels will withstand solvents,incubation in high humidity, boiling water baths and freezing to -20˚C and may in certaincircumstances be used to -70˚C with caution.
Ordering Information
Sidewall Tough-Tags™, 38 x 6mm, roll of 1000 TTSWALL
Laser Sidewall Tough-Tags™, 38 x 6mm, 156 labels/sheet, 3120 SIDE1000
n Suitable for microcentrifuge tubes
n Available in various colours
n Usable down to -20°C
Tough-Tag“
Label and Spot
Dispenser
- see page 16
BioLabaccessories
10
Laser Microtube tough-tags™ la-Laser Tough-Tags™ are sheets of pre-cut peel-off Tough-Tag™ labels for all sizes ofmicrocentrifuge tube and glass vials etc. They are designed for the convenient labelling of largenumbers of samples without having to manually label each tube. Laser Tough-Tags™ arecompatible with all brands of laser printer and are supplied complete with set-up instructions forWord Perfect® and Microsoft® Word software.
Kiss-Cut Laser Tough-Tags™ offer another option for laser printing. They have square cornerswith no spacing between each label.
Laser Flag-Tags™ are ideal for those researchers who require more label space for completesample identification. Flag-Tags™ feature an extra long (63.5mm) surface area but will still fitcomfortably on either 0.5ml or 2.0ml conical microtubes.
Ordering Information
Laser Tough-Tags™, General Purpose, 37 x 18.5mm, 60 labels/sheet, 1500 TTGP1050
Laser Tough-Tags™, 23.5 x 12.5mm, 119 labels/sheet, 2975 TSW2240
Laser Tough-Tags™, 31.5 x 12.5mm, 85 labels/sheet, 2125 TTLW2016
Laser Teeny Tough-Tags™, , 23mm x 8mm, 154 labels/sheet, 3850 LTTM1000
Laser Tough-Tags™, KissCut, 24 x 13mm, 160 labels/sheet, 3200 TTSWKK20
Laser Tough-Tags™, KissCut, 33 x 13mm, 126 labels/sheet, 2520 TTLWKK20
Laser Tough-Tags™, KissCut, 25 x 25mm, 80 labels/sheet, 1600 LTTI1000
Laser Flag-Tags™, 64 x 13mm, 60 labels/sheet, 1500 FLAG1000
Teeny tough-tags™ labelsDesigned specifically for use with 0.2 or 0.5ml polypropylene PCR® reaction tube, these uniquePCR Teeny Tough-Tags™ will withstand thermal-cycling, autoclaving, boiling water baths andfreezing to 80˚C. Teeny Tough-Tags will withstand brief contact with organic solvents, causticagents plus other challenges without peeling, drying out or falling off. Use the ultra-fine TeenyWriter Pen to write on these small labels.
Ordering Information
Teeny Tough Tags, 21 x 7mm, 60 labels/sheet, 1500 TTTNY
Teeny Writer Pen, each TNYWTR
Ordering Information
Laser Microscope Slide Tough-Tags™ Labels, 22 x 22mm, 96 labels/sheet, 2400 MISL1000
flag-tags™
- how to apply
1 2 3
Laser Microscope Slide tough-Microscope Slide Tough-Tag™ labels are ideally sized for microscope slides. Labels willwithstand incubation, boiling water baths and freezing to -20ºC. They will resist organic solventsand caustic agents, and will not become brittle or peel off during long term archival storage.Microscope slide labels are sold in convenient laser-printable sheets ideal for labelling largenumbers of specimens.
n Ideal for labelling large number ofsamples
n Compatible with all brands oflaser printers
n Available in 7 different sizes
n Ideal for labelling PCR® tubes
n will withstand thermal cyclingprotocols
Laser Tough-Tags“
KissCut Laser Tough-Tags“
accessories
11
Tough-Tag™ spots
BioLab
Tough-Tag™ Tough-Spots™ are pre-cut, peel-off dots for microcentrifuge, centrifuge, sample &test tubes. Available in 5 colours plus a special for radioactive warning labelling, they offer easysample and tube identification. Tough-Spots™ have all the chemical and physical characteristicsof standard Tough-Tags™. Spots are available in a 9.5mm,12.5mm, 19mm and 25mm diametersizes. An easy to load dispenser is available for both Tough Tag Labels and Spots, see page 16.
Laser Tough-Tag™ spotsLaser Tough-Spots™ are pre-cut sheets of dots for labelling microcentrifuge tubes and cryogenicvials. Simply print with laser or inkjet printers, peel the Tough-Spot™ from the release paper, andpress it on to the tube or other container. These Spots will withstand conventional and cryogenicstorage conditions down to -196˚C (for both vapour and liquid phase nitrogen). Laser Tough-Spots™ are chemically resistant and will withstand boiling water baths at 100˚C and dry heat to150˚C without cracking, peeling or degrading. Laser Tough-Spots™ resist water soaking at roomtemperature and water vapour (100% relative humidity) at 35˚C for at least 24 hours.
Now available in Blue, Green, Orange, Yellow and original White for 76mm and 12.7mmdiameter sizes, colour Tough-Spots™ are ideal for coding samples.
Ordering Information
Tough-Spots™, White, small, 9.5mm ø, roll of 1000 TSPOTS
Tough-Spots™ , Red, small, 9.5mm ø, roll of 1000 TSPOTSR
Tough-Spots™ , Yellow, small, 9.5mm ø, roll of 1000 TSPOTSY
Tough-Spots™ , Blue, small, 9.5mm ø, roll of 1000 TSPOTSB
Tough-Spots™ , Green, small, 9.5mm ø, roll of 1000 TSPOTSG
Tough-Spots™ , White, large, 12.5mm ø, roll of 1000 TSPOT50
Tough-Spots™ , Red, large, 2.5mm ø, roll of 1000 TSPOT50R
Tough-Spots™ , Yellow, large, 12.5mm ø, roll of 1000 TSPOT50Y
Tough-Spots™ , Blue, large, 12.5mm ø, roll of 1000 TSPOT50B
Tough-Spots™ , Green, large, 12.5mm ø, roll of 1000 SPOT50G
Tough-Spots™ , White, 19mm ø, roll of 1000 TSPOTS75
Tough-Spots™ , White, 25mm ø, roll of 1000 TSPOTS100
Radioactive Warning Tough-Spots™, 9.5mm ø, roll of 1000 RWTS1000
Ordering Information
Laser Tough-Spots™, White, small, 9.5mm ø, 192 labels/sheet, 3640 SPOT1000
Laser Tough-Spots™, Blue, small, 9.5mm ø, 192 labels/sheet, 3640 SPOT1100
Laser Tough-Spots™, Green, small, 9.5mm ø, 192 labels/sheet, 3640 SPOT1200
Laser Tough-Spots™, Orange, small, 9.5mm ø, 192 labels/sheet, 3640 SPOT1300
Laser Tough-Spots™, Red, small, 9.5mm ø, 192 labels/sheet, 3640 SPOT1400
Laser Tough-Spots™, Yellow, small, 9.5mm ø, 192 labels/sheet, 3640 SPOT1500
Laser Tough-Spots™, White, large, 13mm ø, 192 labels/sheet, 3640 SPOT2000
Laser Tough-Spots™, Blue, large, 13mm ø, 192 labels/sheet, 3640 SPOT2100
Laser Tough-Spots™, Green, large, 13mm ø, 192 labels/sheet, 3640 SPOT2200
Laser Tough-Spots™, Orange, large, 13mm ø, 192 labels/sheet, 3640 SPOT2300
Laser Tough-Spots™, Red, large, 13mm ø, 192 labels/sheet, 3640 SPOT2400
Laser Tough-Spots™, Yellow, large, 13mm ø, 192 labels/sheet, 3640 SPOT2500
Laser Tough-Spots™, White, 19mm ø, 108 labels/sheet, 2160 SPOT3000
Laser Tough-Spots™, White, 25mm ø, 63 labels/sheet, 1260 SPOT4000
Tough-Tag“
Label and Spot
Dispenser
n Ideal for labelling all sorts ofmicrotubes and centrifuge tubes
n Available in 5 different colours foreasy sample identification
n Ideal for labelling large number ofsamples
n Available in 6 different colours foreasy sample identification
n Available in 4 different sizes
BioLabaccessories
12
Cryogenic tough-tags™
The cryogenic series of Tough-Tags™ are pre-cut labels designed for the labelling ofmicrocentrifuge tubes and vials for use at extremes of temperatures. These unique labels willwithstand conventional freezing and cryogenic liquid nitrogen storage down to -196˚C (for bothvapour and liquid phase nitrogen). Additionally, they are chemically resistant and will withstandboiling water baths at 100˚C and dry heat to 150˚C without cracking, peeling or degrading.
Cryo-Babies™ are 32.5 x 12.5mm in size and are designed for 1.5ml microtubes and standardcryovials, while the larger Cryo-Tag™ labels are ideal for identifying test tubes, bottles, flasks,vials and freezer boxes.
Both Cryo-Babies™ & Cryo-Tags™ are available in laser- or inkjet-printable sheets for processinglarge numbers of sample labels.
Cryo-Babies for
small tubes
Cryo-Tags for
larger tubes
Ordering Information
Cryo-Babies™, 32.5 x 12.5mm, roll of 1000 CRY-1000
Cryo-Tags™, 38 x 19mm, roll of 1000 CRY-2000
Laser cryo-tags®
Laser Cryo-Tags™ are ultra-flexible polyolefin labels with a solvent-resistant acrylic adhesive.They are chemically inert and adhere to all plastics, glass and metal. The labels will withstandboiling water baths at 100ºC and dry heat up to 150ºC without cracking, peeling or degrading.Cryo-Tags™ also withstand conventional and cryogenic storage conditions (vapour and liquidphase nitrogen storage at -196ºC). They resist most detergents and oils, as well as manyorganic solvents and caustic agents without peeling.
Cryo–Tags™ for laser printers are available in a wide variety of sizes for microtubes, cryo-tubesand other cryogenic containers and equipment. Now available in a variety of colours, Blue,Green, Orange, Red and Yellow, they are therefore ideal for colour coding samples.
n Temperature Resistant - From150ºC (dry heat) to - 196°C (vapourand liquid phase nitrogen)
n Ideally Sized - Fits on a widerange of vials and othercontainers
n Durable - Cryo-Tags are chemical,water and moisture resistant
n Now available in a variety ofcolours
n Cryo-Tags™ withstand extremes intemperature, down to -196°C
n Available in two sizes for use withmicro/cryotubes and centrifugetubes
Ordering Information
Laser Cryo-Tags™, Cut to size, White, 216 x 297mm, blank LCRY1000
Laser Cryo-Tags™ , Cryo Vial, White, 43 x 19mm, 52 labels/sheet, 1040 LCRY1100
Laser Cryo-Tags™ , Rack & Box, White, 38 x 19mm, 60 labels/sheet, 1200 LCRY1200
Laser Cryo-Tags™ , Rack & Box, White, 67 x 25mm, 30 labels/sheet, 30 LCRY1258
Laser Cryo-Babies™, White, 33 x 13mm, 85 labels/sheet, 1700 LCRY1700
Laser Cryo-Babies™, Red, 33 x 13mm, 85 labels/sheet, 1700 LCRY1700R
Laser Cryo-Babies™, Yellow, 24 x 13mm, 85 labels/sheet, 1700 LCRY1700Y
Laser Cryo-Babies™, Blue, 33 x 13mm, 85 labels/sheet, 1700 LCRY1700B
Laser Cryo-Babies™, Green, 33 x 13mm, 85 labels/sheet, 1700 LCRY1700G
Laser Cryo-Babies™, Orange, 33 x 13mm, 85 labels/sheet, 1700 LCRY1700O
Laser Cryo-Tags™, White, 24 x 13mm, 119 labels/sheet, 2380 LCRY2380
Laser Cryo-Tags™, Red, 24 x 13mm, 119 labels/sheet, 2380 LCRY2380R
Laser Cryo-Tags™, Yellow, 24 x 13mm, 119 labels/sheet, 2380 LCRY2380Y
Laser Cryo-Tags™, Blue, 24 x 13mm, 119 labels/sheet, 2380 LCRY2380B
Laser Cryo-Tags™, Green, 24 x 13mm, 119 labels/sheet, 2380 LCRY2380G
Laser Cryo-Tags™, Orange, 24 x 13mm, 119 labels/sheet, 2380 LCRY2380O
Laser Cryo-Tags™, White, 76 x 51mm, 12 labels/sheet, 150 LCRY3020
accessories
13
Bake-Tags™
BioLab
Thermal Transfer tough-tags®
Thermal Transfer Tough-Tags™ use a special solvent resistant acrylic-based adhesive whichprovides excellent cold temperature performance, down to -196ºC (liquid and vapour phasenitrogen). The matt top coat resists degradation from scuffing, chemical, moisture and widetemperature fluctuations. Also the matt white face stock is specially coated for use with a widerange of resin and wax ribbons*. Thermal Transfer Tough-Tags™ are compatible with a widevariety of thermal printers. These tags will also help save money by eliminating label waste.*Resin ribbons are recommended for optimum performance.
Ordering Information
Bake-Tags™, 38 x 19mm, 250 BAKE250
Ordering Information
Thermal Transfer Tough-Tags™, White, 50 x 6.5mm, MicroPlates, 25mm, roll of 2000 THER1225
Thermal Transfer Tough-Tags™, White, 50 x 6.5mm, MicroPlates, 76.5mm, roll of 5000 THER3225
Thermal Transfer Tough-Tags™, White, 80 x 38mm , Bottles, 25mm, roll of 2000 THER1350
Specially engineered labels for thermal extremes (-196˚C to +200˚C), Bake-Tag™ labels aredesigned to survive almost any treatment or storage environment on almost any material foundin the research and clinical laboratory, without drying out, burning, melting, discolouring orpeeling-off. These oven-safe marking labels will withstand extreme temperature ranges both wetand dry. Bake Tags™ will withstand conventional heat sterilising, autoclaving, cryogenic storagein liquid nitrogen and boiling water baths.
Use upto+200°C
Tough-Tag™ dispenserThe Tough-Tag™ Dispenser can be used to dispense all Tough-Tags™, Tough-Spots™ and Cryo-Tags™. Made of durable acrylic, it is easy to load and it saves time and space on the benchtop.It holds up to four rolls providing the flexibility of using the appropriate combination of labels fora particular project/experiment.
Ordering Information
Tough-Tag™ Dispenser TTDP9000
pETrI-SEaL™ petri dish sealing tapePetri-Seal tape is specifically designed for sealing the lids of petri dishes, microtitre plates andculture plates. The unique elastomer characteristics of Petri-Seal allows the tape to stretch andconform around the irregular perimeter of these vessels to form a tight seal. Petri-Seal willprevent water vapour loss, reduce the rate of gas exchange, and prevent the entry ofcontaminants. Petri-Seal is waterproof and chemically resistant to most organic solvents andcaustic agents. Petri-Seal is made from a durable 0.1mm thick tape which is abrasion andpuncture resistant.
Ordering Information
Petri-Seal, Clear, 33m Roll PSEAL-108C
Petri-Seal, White, 33m Roll PSEAL-108W
Petri-Seal, Red, 33m Roll PSEAL-108R
Petri-Seal, Yellow, 33m Roll PSEAL-108Y
Petri-Seal, Blue, 33m Roll PSEAL-108B
n Stretches to form a tight seal
n Flexible down to -30˚C
n will withstand continuousexposure to temperatures from -40˚C to +77˚C
BioLabaccessories
14
IdentiTapes and dispensersn Identify samples easily
n oil, water and acid resistant
n Paper based
n withstands extremes intemperatures, -20°C to +121.1°C
n Ideal for use in a freezer,refrigerator or incubator
n No adhesive residue left whenremoved
n Surface can be written on withpen, pencil or Lab Marker
Ordering Information
WIDTH 12.7mm 19.0mm 25.4mm 12.7mm 19.0mm 25.4mm
LENGTH* 12.7m 12.7m 12.7m 55m 55m 55m
WHITE ST12W ST34W ST10W ST-120W ST34W ST100W
YELLOW ST12Y ST34Y ST10Y ST-120Y ST34Y ST100Y
GREEN ST12G ST34G ST10G ST-120G ST34G ST100G
PINK ST12P ST34P ST10P ST-120P ST34P ST100P
RED ST12R ST34R ST10R ST-120R ST34R ST100R
ORANGE ST12O ST34O ST10O ST-120O ST34O ST100O
BLUE ST12B ST34B ST10B ST-120B ST34B ST100B
VIOLET ST12V ST34V ST10V ST-120V ST34V ST100V
PACK SIZE 5 4 3 3 2 2NB colours may be assorted to make up pack size (must be of same width and length)
Small Tape Dispenser, Tape core diameter 26mm DISP26MM
Large Tape Dispenser, Tape core diameter 76mm DISP76MM
Biocom self-adhesive IdentiTapes aredesigned to provide the perfect solution to awide variety of labelling requirements. Theyare oil-proof, waterproof and acid resistanttapes which will withstand temperatureextremes of -20°C to over +121°C. They willadhere to surfaces such as glass, plastic,metal, paper, rubber and any other drysurface yet can be easily removed with noadhesive residue being left on the originalsurface. IdentiTapes can be written on withball point pen, pencil, felt markers or BiocomLab Markers, shown below.
Biocom Tape Dispensers are perfect for easyone-handed access to IdentiTapes andsimilar coloured identification tapes. Aserration on the dispensing edge allows thetape to be easily torn off. Each dispenser willtake up to 12 rolls of the most popular12.7mm wide tapes. Of 3mm smoked acrylicconstruction, two models are available fortapes of differing core diameters.
serrated cutting edge Large diameter tape dispenser
Laboratory markersThe Biocom Lab Marker is a special purpose marker designed to write through moisture aseasily as it writes on dry surfaces. The Lab Marker provides permanent marking on all types ofplastic disposables. On glass, metal or porcelain surfaces the ink will not smear when subjectedto water or alcohol during normal use - it can however be washed off these surfaces allowingthem to be repeatedly marked. Resisting solvents such as xylene, alcohols, acetone andformalin, Lab Marker II is ideal for histology and cytology labs.
The Biocom Biotech Marker is no ordinary marker pen. Using a special quick drying ink, thisfine tip marker has been designed specifically for use in research labs, to write on polypropyleneand other ultra-smooth surfaces, such as microtubes. Additionally, it will withstand autoclaving,alcohol ice baths and mineral heating oil processes used in molecular and cell biology.
Ordering Information
Black Blue Green Red
Lab Marker, pk/10 R1401 R1403 R1405 R1406
Lab Marker II, pk/10 R1451 n/a n/a n/a
Biotech Marker, pk/10 R1441 n/a n/a n/a
Dimensions:
Small 180 x 135 x 95mm
Large 215 x 180 x 140mm
Biotech marker pen
* Tape length 12.7m = Core Diameter 26mm; Length 55m = Core Diameter 76mm