bill of quantity banglow

BUILDING WORKS

BILL NO.C- DOUBLE STOREY BANGLOW

ITEM DESCRIPTION FROM PAGE

SUMMARY

A WORK BELOW LOWEST FLOOR LEVEL C/WBLFL/6

B FRAME C/FRAME/1

C UPPER FLOOR C/UF/1

D ROOF C/ROOF/7

E STAIRCASE AND STEPS C/STAIR/1

F EXTERNAL WALL C/EW/1

G WINDOW C/WDW/4

H DOOR C/DOOR/5

J INTERNAL WALL C/IW/1

K WALL FINISHES C/WF/3

L FLOOR FINISHES C/FF/6

M CEILING FINISHES C/CL/1

N SANITARY FITTING C/SF/3

P SUNDRIES C/SUND/1


CARRIED TO SUMMARY OF BUILDING

C1/SUM/1

AMOUNT

198,356.45

85,986.00

35,155.25

146,805.25

56,500.00

69,101.00

101,077.00

71,850.00

14,556.00

84,457.00

9,084.00

980.00

39,395.00

700.00

914,002.95

C1/SUM/1

BUILDING WORKS


ITEM DESCRIPTION UNIT Q'TY RATE

WORK BELOW LOWEST FLOOR LEVEL

A Oversite to reduce level average 350mm deep m2 875 7.00

Bm3 4 10.00

CDitto, exceeding 1.50m deep but not exceeding 3.00m deep m3 99 10.00

Dm3 54 10.00

Hardcore as described :-

E

m2 393 10.00

F Ditto, under swimming pool and pond slab m2 45 10.00

Sand blinding to receive damp proof membrane as described :-

Gm2 393 3.00

H Ditto, under swimming pool and pond slab m2 45 3.00

Carried to Collection :

C/WBLFL/1

Excavate commencing from formation levels, get out, part return, fill in and ram, deposit and spread in making up levels where directed within the site and remainder load and cart away from site :-

Pit for pile cap commencing from reduce level not exceeding 1.50m deep

Trench for ground beam commencing from reduce level not exceeding 1.50m deep

150mm Thick (consolidated thickness) bed of approved hardcore, spread, levelled, well rolled and consolidated including 50mm thick blinding top surfaces with sand as described (measured separately) under floo rslab

50mm Thick sand blinding spread and well compacted under floor slab

WORK BELOW LOWEST FLOOR LEVEL (Cont'd)

BUILDING WORKS



Lean concrete Grade 15 as described :-

A 50mm Thick under pile cap m2 46 11.00

B 50mm Thick under ground beam m2 101 11.00

C 50mm Thick under ground floor slab m2 393 11.00

D 50mm Thick under swimming pool and pond slab m2 45 11.00

Vibrated reinforced concrete Grade 30 as described in :-

E Pile cap m3 20 350.00

F Swimming pool and pond wall m3 29 350.00

G Column stump (Provisional) m3 8 350.00

H Ground beam m3 50 350.00

J 125mm Thick ground floor slab m2 393 43.75

K 250mm Thick swimming pool slab m2 45 87.50


C/WBLFL/2

Mild steel rod reinforcement as described :-


BUILDING WORKS



In Column stump (provisional)

A 6mm diameter as link kg 634 3.80

In ground beam

B 6mm diameter as stirrups kg 1,401 3.80

In pile cap

C 6mm diameter as bars kg 110 3.80

High tensile rod reinforcement as described :-

In pile cap

D 12mm diameter as bars kg 36 3.80

E 16mm diameter as bars kg 1,390 3.80

In Column stump (provisional)

F 12mm diameter as bars kg 457 3.80

G 16mm diameter as bars kg 389 3.80

In ground beam

H 12mm diameter as bars kg 2,924 3.80

J 16mm diameter as bars kg 1,579 3.80

In swimming pool and pond wall

K 12mm diameter as bars kg 3,795 3.80


C/WBLFL/3

High tensile rod reinforcement as described(cont'd) :-

In ground floor slab


BUILDING WORKS



A 12mm diameter as bars kg 1,029 3.80

Fabric reinforcement as described :-

B BRC A7 m2 727 17.00

C Ditto in swimming pool slab m2 40 17.00

D BRC A8 m2 24 20.00

E BRC A10 m2 24 28.00

Use and waste of sawn formwork as described to :-

F Sides of pile cap m2 96 35.00

G Sides of swimming pool and pond wall m2 194 35.00

H Sides of column stump (Provisional) m2 145 35.00

J Sides of ground beam m2 606 35.00

Km 55 5.00

Damp-proof membrane as described :-

L

m2 387 3.00

M Ditto under swimming pool slab, ditto m2 24 3.00


C/WBLFL/4

A layer of steel mesh fabric reinforcement or approved equivalent well lapped at joints and embedded in ground floor slab (measured nett-no allowance made for laps) :-

Edge of concrete slab exceeding 100mm but not exceeding 200mm high

0.25mm Thick approved heavy duty polythene sheet damp-proof membrane, laid under ground floor slab, well lapped at joints including all necessary protection to prevent puncture (measured nett-no allowance made for laps)


Supply and apply two coats of Penetron Crystalline or other approved equivalent capillary waterproofing coating system used at rate of 1.4kg/m2 onto concrete surface as described with 5 years warranty jointly by manufacturer and applicator applied to concrete slab all as described strictly in accordance to manufacturer's written instruction including all surfaces preparation, screed and 300mm upturn to beam and wall- (measured nett- no allowance made for laps)

BUILDING WORKS



A Swimming pool and pond base m2 140 35.00

B Swimming pool and pond wall m2 200 35.00

C

m 60 25.00

D

m2 438 5.00


C/WBLFL/5

COLLECTION :-

Supply and apply two coats of Penetron Crystalline or other approved equivalent capillary waterproofing coating system used at rate of 1.4kg/m2 onto concrete surface as described with 5 years warranty jointly by manufacturer and applicator applied to concrete slab all as described strictly in accordance to manufacturer's written instruction including all surfaces preparation, screed and 300mm upturn to beam and wall- (measured nett- no allowance made for laps)

Supply and apply 'Axel Tight 112' or approved equalvalent hydroswelling water stop size 25mm x 19mm x 5mm

Ground treatment against subterranean termites using termiticides chemical soil treatment approved by Pesticide Board of Malaysia. including providing five (05) years written guarantee :-

Prepare and apply '4 stage' anti - termite treatment to a concentration of 4 gallons per ten square feet to base and sides of pile cap, sides of beams, sides of column stump, apron and slab, on hardcore and borders and to be carried out by an approved soil treatment specialist to progressively accommodate the construction works or in sections all to the approval by the S.O


BUILDING WORKS



C/WBLFL/1

C/WBLFL/2

C/WBLFL/3

C/WBLFL/4

C/WBLFL/5

WORK BELOW LOWEST FLOOR LEVELCARRIED TO SUMMARY

C/WBLFL/6

TYPE 'C' AMOUNT

6,125.00

40.00

990.00

540.00

3,930.00

450.00

1,179.00

135.00

13,389.00

C/WBLFL/1

TYPE 'C' AMOUNT

506.00

1,111.00

4,323.00

495.00

7,000.00

10,150.00

2,800.00

17,500.00

17,193.75

3,937.50

65,016.25

C/WBLFL/2

TYPE 'C' AMOUNT

2,409.20

5,323.80

418.00

136.80

5,282.00

1,736.60

1,478.20

11,111.20

6,000.20

###

14,421.00

48,317.00

C/WBLFL/3

###

TYPE 'C' AMOUNT

3,910.20

###

12,359.00

680.00

480.00

672.00

3,360.00

6,790.00

5,075.00

21,210.00

275.00

1,161.00

72.00

56,044.20

C/WBLFL/4

TYPE 'C' AMOUNT

4,900.00

7,000.00

1,500.00

2,190.00

15,590.00

C/WBLFL/5

TYPE 'C' AMOUNT

13,389.00

65,016.25

48,317.00

56,044.20

15,590.00

198,356.45

C/WBLFL/6

BUILDING WORKS



FRAME


A Columns m3 26 350.00

B Floor Beams m3 19 350.00

C Roof Beams m3 14 350.00

Mild steel rod reinforcement as described :-

In Columns -

D 6mm diameter as link kg 1,442 3.80

In Floor Beams

E 6mm diameter as stirrups kg 641 3.80

In Roof Beams

F 6mm diameter as stirrups kg 308 3.80


In Columns

G 12mm diameter as bars kg 1,917 3.80

H 16mm diameter as bars kg 704 3.80

In Floor Beams

J 12mm diameter as bars kg 1,287 3.80

K 16mm diameter as bars kg 1,038 3.80

In Roof Beams

L 12mm diameter as bars kg 605 3.80

M 16mm diameter as bars kg 603 3.80


N Sides of columns m2 461 35.00

P Sides and soffit of floor beams m2 286 35.00

Q Sides and soffit of roof beams m2 192 35.00

FRAMECARRIED TO SUMMARY

C/FRAME/1

AMOUNT

9,100.00

6,650.00

4,900.00

5,479.60

2,435.80

1,170.40

7,284.60

2,675.20

4,890.60

3,944.40

2,299.00

2,291.40

16,135.00

10,010.00

6,720.00

85,986.00

C/FRAME/1

BUILDING WORKS



UPPER FLOOR


A 125mm Thick suspended slab m2 232 43.75


In suspended floor slab

B 12mm diameter as bars kg 159 43.75

Fabric reinforcement as described :- -

C BRC A7 m2 404 17.00

D BRC A8 m2 58 20.00

E BRC A10 m2 15 28.00

F BRC B8 m2 3 20.00


G Soffit of suspended floor slab m2 232 35.00

H Edges of suspended floor slab m 93 7.00

J To floor m2 22 35.00

UPPER FLOORCARRIED TO SUMMARY

C/UF/1

A layer of steel mesh fabric reinforcement or approved equivalent well lapped at joints and embedded in suspended floor slab (measured nett-no allowance made for laps) :-

Supply and apply single layer of Penetron Deckproof or other approved equivalent clastomeric waterproofing membranes coating system used at rate of 1.5kg/m2 onto concrete surface as described with 5 years warranty jointly by manufacturer and applicator applied to concrete slab all as described strictly in accordance to manufacturer's written instruction including all surfaces preparation, screed and 300mm upturn to beam and wall- (measured nett- no allowance made for laps)

AMOUNT

10,150.00

6,956.25

6,868.00

1,160.00

420.00

60.00

8,120.00

651.00

770.00

35,155.25

BUILDING WORKS



ROOF

Contractor's Designed Roof Trusses

Notes:-

Contractor's Proposed Proprietary PrefabricatedRoof Truss System

Notes :-

-

The design of trusses shall cater all load for M&E services.


C/ROOF/1ROOF (cont'd)

The Contractor shall design, fabricate and deliver and furnish at his expenses all necessary materials, tools, hoist, staging, temporary bracing etc. for the safe and proper erection of the Prefabricated Timber Roof Trusses (hereinafter call PRT) complete with rafters, top and bottom chords, bracings and tie-downs, struts, bearers, truss connectors,, straps, wall plates, connections, other associated ancillary fixing products and methods and obvious items required for the works to ensure that all items act together as an integral structure that is structurally stable under all the specified combinations of loading conditions, all to the approval of the S.O.

The design of the PRT shall be by an approved System Provider (S.P) by JKR and fabricated by a fabricator as defined and in accordance with JKR -20600-0020-99 : Specification for Fabricated Timber Roof Trusses and Architect's drawings.

BUILDING WORKS



Contractor's Designed Roof Trusses (Cont'd)

Notes:- (Cont'd)

Contractor's Proposed Proprietary PrefabricatedRoof Truss System (Cont'd)


C/ROOF/2

The Contractor shall note that PRT shall be designed to suit the

ceiling, the location of water tanks, roof coverings, mechanical

and electrical (M&E) facilities and whatever load deemed

necessary for the functional purpose of the building. The water

tank shall no supported by the PRT. In the case where the PRT

are designed at centres which do not suit or facilitate the fixing

of the ceiling joist, etc. required to facilitate the ceiling panels.

The Contractor shall also in his design, facilitate the fixing of

timber rafter and its components used as an architectural

feature along the eaves of the PRT.

The Contractor shall ensure that all truss member located on

the ducting bracket shall be protected with rubber pad to

reduce the vibration caused by ducting. Rod to support ducting

shall be installed on wed plane member ( stronger exist to

decrease twisting on truss member). Drilling is strictly

prohibited on all truss member. M&E shall be installed using

strap.

The Contractor shall note that he shall be solely responsible for the adequacy and the sufficiency of the PRT

BUILDING WORKS



ROOF (cont'd)

Contractor's Designed Roof Trusses (Cont'd)

Notes:- (Cont'd)

Rates to include :

Roof Truss System (Cont'd)

AItem

BAllow for high quality Grade A exposed timber roof trusses Item

C

m2 795 22.00


C/ROOF/3

ROOF (cont'd)

Rates for the PRT and rafter shall include all necessary

materials, fabricating, delivery to site, hoisting and fixing in

position, all fixing accessories including holding down bolt or

ram setting, all ancillary item and temporary works for the

complete installation of the PRT

Rate for the PRT shall also include for design fees, testing for

compliance, quality assurance and control and all other

necessary cost for patent right design, trademark or name

Design, supply, fabricated and deliver to site Prefabricated

Timber Roof Trusses including fixing and hoisting in position

all fabricated PRT rafters, chords, bearers, tie-down and

bracings, strut, wall plate, connectors, and fixings, straps and

other associated ancillary fixing products and other associated

works, materials and labour required for the complete

installation of the PRT to the approval of the S.O. (measured

flat on plan)

Roof area ; approximately 7.50m High above ground floor level ( Approximately 795m2)

Supply and install 12mm thick antitheft weatherproof plywood including fixing and hoisting in position and all other associated works to the satisfaction of the S.O.

BUILDING WORKS



Roof finishes

A

m2 795 65.00

Bm 48 30.00

C Standard 'Owens Corning' hip capping ditto m 89 30.00

D No. 6 45.00

E No. 1 50.00

F No. 2 55.00

G No. 27 55.00

Insulation as described :-

H

m2 795 4.00

J

m2 795 5.00

Wrot pressure treated Grade 'A' timber as described :

K 200mm x 19mm Thick decorative double layer fascia boards m 260 10.00

Mm 65 18.00


C/ROOF/4

ROOF (cont'd)

Owens Corning Oakridge Pro 30' fibreglass asphalt shingle

roofing of approved colour, laid to maxImum 65 degrees pitch

on and including, underlayment felt, 50mm x 25mm approved

timber batten at approved centres, fixed as per manufacturer's

instruction complete with all necessary accessories (measured

nett - no allowance made for laps)

Standard 'Owens Corning' ridge capping to match roof tiles, bedded, jointed and pointed with cement and sand (1:3) mortar

EXTRA OVER three way-apex ditto

EXTRA OVER four way-apex ditto

EXTRA OVER ridge end ditto

EXTRA OVER hip end ditto

One layer of single sided aluminium foil building paper sisalation and fixed to timber with 150mm laps all joints all in accordance with the manufacturer's instruction (measured nett - no allowance made for laps)

100mm Thick fibreglass wool insulation laid on roof framing and including chicken wire mesh (measured nett-no allowance made for laps)

100mm x 75mm Thick bracer complete with bracket and connections

BUILDING WORKS



Roof Finishes (cont'd)

Approved No. 22 gauge galvanised iron sheet as described:-

A

m 75 18.00

B General surfaces of flashing m2 75 6.00

C Surfaces of fascia boards m2 117 12.00

D Surfaces of bracer m2 23 12.00

Water tank roof slab


E 125mm Thick suspended slab m2 7 43.75

F Extra for forming 125mm x 50mm wide scupper drain m 15 5.00

Fabric reinforcement as described :-

G BRC A7 m2 15 17.00


C/ROOF/5

ROOF (cont'd)


Flashing, 1050mm girth, four times bent, one end dressed under concrete roof tiles and the other end fixed to concrete or brickwork

Treat with etching primer or mordant solution and apply one coat of zinc chromate, one undercoat and two finishing coats of gloss enamel paint on the following surfaces :-

Knot, prime, stop and paint one coat of an approved undercoat and two coats of super gloss paint as described on woodwork :

A layer of steel mesh fabric reinforcement or approved equivalent well lapped at joints and embedded in suspended floor slab (measured nett-no allowance made for laps) :-

BUILDING WORKS



A Soffit of suspended floor slab m2 7 35.00

B To floor m2 7 35.00

C 25mm Thick to floor m2 7 12.00


C/ROOF/6

ROOF (cont'd)

Supply and apply single layer of Penetron Deckproof or other approved equivalent clastomeric waterproofing membranes coating system used at rate of 1.5kg/m2 onto concrete surface as described with 5 years warranty jointly by manufacturer and applicator applied to concrete slab all as described strictly in accordance to manufacturer's written instruction including all surfaces preparation, screed and 300mm upturn to beam and wall- (measured nett- no allowance made for laps)

Cement and sand (1:3) paving with a smooth trowelled finished as described :-

BUILDING WORKS



COLLECTION

C/ROOF/1

C/ROOF/2

C/ROOF/3

C/ROOF/4

C/ROOF/5

C/ROOF/6

ROOF

CARRIED TO SUMMARY

C/ROOF/7

AMOUNT

C/ROOF/1

AMOUNT

C/ROOF/2

AMOUNT

56,000.00

17,490.00

73,490.00

C/ROOF/3

AMOUNT

51,675.00

1,440.00

2,670.00

270.00

50.00

110.00

1,485.00

3,180.00

3,975.00

2,600.00

1,170.00

68,625.00

C/ROOF/4

AMOUNT

1,350.00

450.00

1,404.00

276.00

306.25

75.00

255.00

4,116.25

C/ROOF/5

AMOUNT

245.00

245.00

84.00

574.00

C/ROOF/6

AMOUNT

-

-

73,490.00

68,625.00

4,116.25

574.00

146,805.25

C/ROOF/7

BUILDING WORKS



STAIRCASE AND STEPS

A

Flight 4 7,500.00

B

No 1 3,500.00 -

C

No 1 3,000.00

D

No 1 1,000.00

Mild steel staircase

E

No 1 9,000.00

Timber Staircase

F

No 1 6,000.00

Stainless Steel Grab Ladder (Swimming Pool)

G

No 2 2,000.00

STAIRCASE AND STEPSCARRIED TO SUMMARY

C/STAIR/1

Construct and complete vibrated reinforced concrete Grade 30 as staircase and including rod reinfrocement,formwork complete with timber strip finish and hardwood timber handrailing at 1000mm high with painting

Construct and complete vibrated reinforced concrete Grade 30 as step approximately 4000mm x 1500mm wide and including rod reinfrocement, formwork complete with pebble wash finish and hardwood timber handrailing at 1000mm high with painting

Construct and complete vibrated reinforced concrete Grade 30 as step approximately 3500mm x 1800mm wide and including rod reinfrocement, formwork complete with pebble wash finish and hardwood timber handrailing at 1000mm high with painting

Construct and complete vibrated reinforced concrete Grade 30 as step approximately 1000mm x 2000mm wide and including rod reinfrocement, formwork complete with timber strip finish including painting

Construct and complete mild steel spiral staircase complete with hardwood timber handrailing at 1000mm high including timber step finishes and painting all as pe drawing No. AIK/314/10/TRSB/DT/TU-23

Construct and complete timber staircase complete with hardwood timber handrailing at 1000mm high including finishes and painting all as pe drawing No. AIK/314/10/TRSB/DT/TK-22

Supply and fix in position approved stainless steel grab ladder overall size 750mm wide x 3000mm high and bolted to concrete slab to manufacturer's details

AMOUNT

30,000.00

3,500.00

3,000.00

1,000.00

9,000.00

6,000.00

4,000.00

56,500.00

C/STAIR/1

BUILDING WORKS


ITEM DESCRIPTION UNIT QTY RATE###

EXTERNAL WALL

Am 595 30.00

B -

m2 827 27.00

C

m 158 1.50

D

No 585 1.00

Timber Railing

E

m 22 150.00

Timber Sun Louvers

F

m2 80 310.00

EXTERNAL WALLCARRIED TO SUMMARY

C/EW/1

Precast concrete Grade 25 as specified with and including all necessary reinforcement and formwork finish fair on exposed surfaces to received painting works (measured separately) as per Drawing

150mm x 150mm Thick decorative coping fixed to walls around window

Brickwork in clay brick in cement and sand (1:3) mortar as described :-

Half brick (115mm thick) wall, strecther bond; reinforced with and including a layer of 63mm wide `Exmet' at every fourth course

Damp proof course as described :-

115mm Wide horizontal damp-proof course as described laid and bedded on cement and sand (1:3) bedding

Sundries :-

6mm Diameter x 450mm long mild steel bars as bonding tie with one end hooked and cast into concrete and the other end built into joint of brickwork including perforation through formwork

Supply and fix in position decorative 1000mm high timber railing and balustrade on 100mm thick concrete kerb including painting works to architect's approval and to manufacturer detail

Supply and fix in position hardwood timber sun louvers including all necessary timber stucture and painting works to to architect's approval and to manufacturer detail

AMOUNT

17,850.00

22,329.00

237.00

585.00

3,300.00

24,800.00

69,101.00

C/EW/1

BUILDING WORKS



INTERNAL WALL

A

m2 526 27.00

B -

m 82 1.50

C

No 231 1.00

INTERNAL WALLCARRIED TO SUMMARY

C/IW/1

Brickwork in clay brick in cement and sand (1:3) mortar as described :-

Half brick (115mm thick) wall, strectcher bond, reinforced with and including a layer of 63mm wide `Exmet' at every fourth course

Damp proof course as described :-

115mm Wide horizontal damp-proof course as described laid and bedded on cement and sand (1:3) bedding

Sundries :-

6mm Diameter x 450mm long mild steel bars as bonding tie with one end hooked and cast into concrete and the other end built into joint of brickwork including perforation through formwork

AMOUNT

14,202.00

123.00

231.00

14,556.00

C/IW/1

BUILDING WORKS



WINDOW

A

m 127 19.00

-

AIK/314/10/TRSB/DT/PT/47AIK/314/10/TRSB/DT/PT/48AIK/314/10/TRSB/DT/PT/49AIK/314/10/TRSB/DT/PT/50

ANo 12 1,093.50

(Type W1)

B

No 7 2,187.00 (Type W2)

C

No 3 3,280.50 (Type W3)

D

No 4 4,374.00 (Type W4)

Carried to collection

C/WDW/1

Precast reinforced concrete Grade 25 with and including all necessary formwork, reinforcement, hoisting and setting in position, bedding, jointing and pointing in cement mortar (1:3) :-

115mm x 150mm lintol, reinforced with and including 4 nos 12mm mild steel bar with hooked ends and 6mm diameter mild steel strirrups at 230mm centres

Supply, deliver and fix the following Wrot pressure treated Grade A timber frame casement window with and including timber framing, backing piece, architrave, glazing beads, mullions, jamb, transoms,glazed with 12mm thick tempered glass panel and including all necessary ironmongery and other accessories all fixed strictly in accordance with manufacturer's instruction all as per Drawing No.

Casement window overall size 900mm x 2700mm high complete with fixed timber panel

Casement window overall size 1800mm x 2700mm high comprising of 2 nos. casement panel all in equal panel complete with fixed timber panel



BUILDING WORKS



WINDOW (CONT'D)

AIK/314/10/TRSB/DT/PT/51AIK/314/10/TRSB/DT/PT/59AIK/314/10/TRSB/DT/PT/57AIK/314/10/TRSB/DT/PT/58AIK/314/10/TRSB/DT/PT/61

A

No 1 5,467.50 (Type W5)

B

No 1 2,187.00 (Type W11)

C Casement window overall size 900mm x 1800mm high No 1 729.00 (Type W10)

D

No 1 1,458.00 (Type W10a)

E

No 1 3,888.00 (Type W14)


C/WDW/2

WINDOW (CONT'D)




Casement window overall size 1800mm x 1800mm high comprising of 2 nos. casement panel all in equal panel

Casement window overall size 3600mm x 2400mm high comprising of 4 nos. casement panel all in equal panel

BUILDING WORKS



AIK/314/10/TRSB/DT/PT/52AIK/314/10/TRSB/DT/PT/53AIK/314/10/TRSB/DT/PT/54AIK/314/10/TRSB/DT/PT/56

A Pivot Casement window overall size 900mm x 2700mm high No 16 1,093.50

(Type W6)

BNo 3 567.00

(Type W7)

CNo 2 472.50

(Type W7a)D

No 2 972.00 (Type W9)


C/WDW/3

WINDOW (CONT'D)


Top hung windows overall size 600mm x 2100mm high complete with fixed timber panel

Top hung windows overall size 500mm x 2100mm high complete with fixed timber panel

Timber frame fixed glass panel overall size 900mm x 2400mm high in one panel

BUILDING WORKS



AIK/314/10/TRSB/DT/PT/55AIK/314/10/TRSB/DT/PT/60

ANo 4 594.00

(Type W8)

B

(Type W13) No 6 432.00

C

(Type W15) No 5 264.00

D

(Type W16) No 2 396.00


C/WDW/4

WINDOW (CONT'D)

Supply, deliver and fix the following 25mm thick frameless fixed tempered glass butt joint siting on 'C' channel with clear silicone sealant including all necessary accessories all fixed strictly in accordance with manufacturer's instruction all as per Drawing No.

Frameless fixed tempered glass overall size 300mm x 3300mm high




BUILDING WORKS



COLLECTION

C/WDW/1

C/WDW/2

C/WDW/3

C/WDW/4

WINDOWCARRIED TO SUMMARY

C/WDW/4

AMOUNT

2,413.00

13,122.00

15,309.00

9,841.50

17,496.00

58,181.50

C/WDW/1

AMOUNT

5,467.50

2,187.00

729.00

1,458.00

3,888.00

13,729.50

C/WDW/2

AMOUNT

17,496.00

1,701.00

945.00

1,944.00

22,086.00

C/WDW/3

AMOUNT

2,376.00

2,592.00

1,320.00

792.00

7,080.00

C/WDW/4

AMOUNT

58,181.50

13,729.50

22,086.00

7,080.00

101,077.00

C/WDW/4

BUILDING WORKS


ITEM DESCRIPTION UNIT QTY RATE

DOOR

A

m 60 19.00

B

No. 7 15.00

0

AIK/314/10/TRSB/DT/PP/35AIK/314/10/TRSB/DT/PP/36

C

No 1 7,344.00 (Type D1)

D

No 1 2,227.50 (Type D2)


C/DOOR/1

Precast reinforced concrete Grade 25 with and including all necessary formwork, reinforcement, hoisting and setting in position, bedding, jointing and pointing in cement mortar (1:3) :-

115mm x 150mm lintol, reinforced with and including 4 nos

12mm mild steel bar with hooked ends and 6mm diameter

mild steel strirrups at 230mm centres

138mm x 50mm Heelstone 150mm high cast to profile of door frame and bedded in cement and sand (1:3) with and including mild steel rod cast into concrete

Notwithstanding the Standard Method of Measurement the following doors are being measured on a descriptive lump sum and enumerated

Doors in wrot pressure treated Grade `A' hardwood timber as described all as shown on Architect drawing No.

PAIR 75mm Thick decorative solid timber panelled door overall size 2700mm x 3400mm high complete with timber door frame, 450mm x 25mm thick timber architrave and pair of decorative door handle 80mm x 1300mm high complete with ironmongeries, accessories and painting

PAIR 50mm Thick decorative solid timber panelled door overall size 1500mm x 2700mm high with 450mm x 2400mm x 12mm thick fixed tempered glass complete with timber door frame and 150mm x 25mm thick timber architrave complete with ironmongeries, accessories and painting

BUILDING WORKS



DOOR (CONT'D)

AIK/314/10/TRSB/DT/PP/37AIK/314/10/TRSB/DT/PP/38AIK/314/10/TRSB/DT/PP/39AIK/314/10/TRSB/DT/PP/40

A

No 1 1,782.00 (Type D2a)

B

No 4 1,485.00 (Type D3)

C

No 6 1,485.00 (Type D4)

D

No 7 1,485.00 (Type D5)


C/DOOR/2



50mm Thick decorative solid timber panelled door overall size 1000mm x 2700mm high with 300mm x 2400mm x 12mm thick fixed tempered glass complete with timber door frame and 150mm x 25mm thick timber architrave complete with ironmongeries, accessories and painting

50mm Thick decorative solid timber panelled door overall size 1000mm x 2700mm high with groove line complete with timber door frame and 150mm x 25mm thick timber architrave complete with ironmongeries, accessories and painting

50mm Thick decorative solid timber panelled door overall size 1000mm x 2700mm high with 650mm x 1550mm x 12mm thick fixed tempered glass and groove line complete with timber door frame and 150mm x 25mm thick timber architrave complete with ironmongeries, accessories and painting

BUILDING WORKS



DOOR (CONT'D)

AIK/314/10/TRSB/DT/PP/41AIK/314/10/TRSB/DT/PP/42AIK/314/10/TRSB/DT/PP/43AIK/314/10/TRSB/DT/PP/44

A

No 2 2,673.00 (Type D6)

B

No 1 1,782.00 (Type D7)

C

No 1 2,673.00 (Type D8)

D

No 1 2,673.00 (Type D9)


C/DOOR/3


PAIR 50mm Thick decorative solid pivot timber panelled door overall size 1800mm x 2700mm high with groove line complete with timber door frame and 150mm x 25mm thick timber architrave complete with ironmongeries, accessories and painting

50mm Thick decorative solid pivot timber panelled door overall size 1200mm x 2700mm high with groove line complete with timber door frame and 150mm x 25mm thick timber architrave complete with ironmongeries, accessories and painting


PAIR 50mm Thick decorative solid sliding timber panelled door overall size 1500mm x 2700mm high with 450mm x 2600mm x 12mm thick fixed tempered glass complete with timber door frame complete with ironmongeries, accessories and painting

BUILDING WORKS



DOOR (CONT'D)

AIK/314/10/TRSB/DT/PP/45AIK/314/10/TRSB/DT/PP/46

A

No 1 5,692.50 (Type SD1)

B

No 2 7,920.00 (Type SD2)


C/DOOR/4

DOOR (CONT'D)


3450mm x 3000mm high solid timber frame sliding glass door complete with 12mm thick tempered glass consisting of 4 nos. sliding glass panel door in equal panels and complete with sliding track, ironmongeries, accessories and painting

4800mm x 3000mm high solid timber frame sliding glass door complete with 12mm thick tempered glass consisting of 4 nos. sliding glass panel door in equal panels and complete with sliding track, ironmongeries, accessories and painting

BUILDING WORKS



COLLECTION

C/DOOR/1

C/DOOR/2

C/DOOR/3

C/DOOR/4

DOORCARRIED TO SUMMARY

C/DOOR/5

AMOUNT

1,140.00

105.00

7,344.00

2,227.50

10,816.50

C/DOOR/1

AMOUNT

1,782.00

5,940.00

8,910.00

10,395.00

27,027.00

C/DOOR/2

AMOUNT

5,346.00

1,782.00

2,673.00

2,673.00

12,474.00

C/DOOR/3

AMOUNT

5,692.50

15,840.00

21,532.50

C/DOOR/4

AMOUNT

10,816.50

27,027.00

12,474.00

21,532.50

71,850.00

C/DOOR/5

BUILDING WORKS


ITEM DESCRIPTION UNIT QTY

WALL FINISHES

Externally

A 20mm Thick to wall and column m2 634

B 20mm Thick to docorative concrete copping m2 255

C Extra for forming PVC groove line m 2,406 -

Cement and sand (1:3) backing screed as described :-

To receive mosaic wall tiles

D 19mm Thick to swimming pool wall m2 84

E 19mm Thick to lower pool wall m2 37

F 19mm Thick to wading pool wall m2 9

G 19mm Thick to pond wall m2 70

To receive natural stone tiles

H 19mm Thick to wall m2 182

J 19mm Thick to isolated column m2 22

k Plastered wall and column m2 634

L 20mm Thick to docorative concrete copping m2 255


C/WF/1

WALL FINISHES (Cont'd)

Cement and sand (1:6) plaster mixed with an approved plasticiser finish with a wood float as described :-

Prepare and apply sealer, one undercoat and two finishing coats of 'ICI' weathershield paint as described to :-

BUILDING WORKS



Internally

A 19mm Thick to wall and column m2 1,271


To receive ceramic wall tiles

B 19mm Thick to wall m2 401

To receive natural stone tiles

C 19mm Thick to wall m2 26

D Plastered wall and column m2 1,271


C/WF/2



Prepare and apply sealer, one undercoat and two finishing coats of 'ICI' emulsion paint as described to :-

BUILDING WORKS



COLLECTION :-

C/WF/1

C/WF/2

WALL FINISHESCARRIED TO SUMMARY

C/WF/3

RATE AMOUNT

15.00 9,510.00

15.00 3,825.00

6.00 14,436.00

15.00 1,260.00

15.00 555.00

15.00 135.00

15.00 1,050.00

15.00 2,730.00

15.00 330.00

14.00 8,876.00

14.00 3,570.00

46,277.00

C/WF/1

RATE AMOUNT

15.00 19,065.00

15.00 6,015.00

15.00 390.00

10.00 12,710.00

38,180.00

C/WF/2

RATE AMOUNT

46,277.00

38,180.00

84,457.00

C/WF/3

BUILDING WORKS



FLOOR FINISHES

EXTERNALLY

A 20mm Thick to suspended slab m2 48 12.00


To receive sandstone finish tiles

B 20mm Thick to floor m2 - 12.00

To receive homogeneous tiles


To receive mosaic tiles

D 20mm Thick to swimming pool floor m2 42 12.00

E 20mm Thick to lower pool floor m2 11 12.00

F 20mm Thick to wading pool floor m2 14 12.00

G 20mm Thick to pond floor m2 60 12.00

To receive pebble wash

H 20mm Thick to floor m2 20 12.00

J 20mm Thick to cantilever slab m2 48 12.00

To receive timber strip

K 20mm Thick to floor m2 17 12.00


C/FF/1


BUILDING WORKS



INTERNALLY

A 20mm Thick to floor m2 4 12.00


To receive non-slip ceramic tiles

B 20mm Thick to floor m2 63 12.00

To receive compressed stone tiles


To receive honed marblem2 159 12.00

D 20mm Thick to floor


E 20mm Thick to floor m2 184 12.00


C/FF/2

FLOOR FINISHES


BUILDING WORKS



COLLECTION

C/FF/1

C/FF/2

FLOOR FINISHESCARRIED TO SUMMARY

C/FF/6

AMOUNT

576.00

-

288.00

504.00

132.00

168.00

720.00

240.00

204.00

2,832.00

C/FF/1

AMOUNT

48.00

756.00

1,332.00

1,908.00

2,208.00

6,252.00

C/FF/2

AMOUNT

2,832.00

6,252.00

9,084.00

C/FF/6

BUILDING WORKS



CEILING FINISHES

EXTERNALLY

A 5mm Thick sides and soffit of beam m2 98 10.00

CEILING FINISHESCARRIED TO SUMMARY

C/CL/1

Prepare and apply 5mm Thick`Brefill -S & FW' or other equal and approved skim coat plastering with and including one coat of cement based paint and preparing backing surfaces to:-

AMOUNT

980.00

980.00

C/CL/1

BUILDING WORKS



SANITARY FITTINGS

A No. 6 850.00

-

BNo. 1 1,600.00

C

No. 8 550.00

D Squarflo 101' anti cockroach stainless steel floor trap coverNo. 20 25.00

ENo. 7 90.00

F Chrome plated 'Grohe 30098001' costa L bibtap No. 7 60.00

G Chrome plated 'Ilife 977801C' bibtap No 2 60.00

H Chrome plated 'Grohe' garden tap No 4 60.00

J

No. 5 370.00


C/SF/1

Supply and fix the following approved sanitary fittings and

accessories including storing, assembling, bedding, plugging

and screwing with matching screws, cutting and pinning or

building in brackets, jointing and connecting to services and

making good as required:

White finish 'Caroma K1WC4511PD3011DF1T' liano washdown

water closet complete with concealed outlet (BIBO), internal

fittings top push button, wc pan outlet connector, soft closing

seat and cover and fixing bolt

White finish 'Caroma KWH 1417' seido wall hung water closet, ditto

White finish 'Caroma K1WBFC3399' cube above counter basin

complete with chrome plated 'GROHE 32144' lineare single

lever basin mixer come with pop up waste, compression nut

and chrome plated 'Grohe 28947' basin P-trap

Chrome plated 'Grohe 27812' hand bidet complete with 'Grohe 22958' angle valve

Chrome plated 'Grohe 28368/ 28576' rainshower modern

210mm come with mounted shower arm complete with chrome

plated 'Grohe 27261' euphoria shower set massage, chrome

plated 'Grohe 28636' wall union and chrome plated 'Grohe

19548001, 33965' new eurodisc concealed single lever bath

mixer with diverter

BUILDING WORKS



SANITARY FITTINGS (CONT'D)

A

No. 3 270.00

B

No. 1 4,500.00

C Chrome plated 'Grohe 40369/ 40368' essential soap holder No. 8 65.00

D Chrome plated 'Grohe 40367' essential paper holder No. 7 65.00

E

No. 3 320.00

F

No. 5 130.00

G

No. 1 250.00


C/SF/2

Supply and fix the following approved sanitary fittings and

accessories including storing, assembling, bedding, plugging

and screwing with matching screws, cutting and pinning or

building in brackets, jointing and connecting to services and

making good as required:

Chrome plated 'Grohe 27261' euphoria shower set massage,

chrome plated 'Grohe 28636' wall union and chrome plated

'Grohe 19548001, 33965' new eurodisc concealed single lever

bath mixer with diverter

White finish 'American Standard TF-70131100' moment

whirlpool complete with crome plated 'Grohe 32336001' new

eurodisc single lever 3 hole bath mixer with diverter

Stainless steel 'Prestile AH0834D' two bowl one drainer sink

complete with chrome plated 'Ilife 202102C' single lever sink

mixer and PVC white local sink bottle trap 'Q-BT 1 1/2'

Approved decorative 1800mm x 900mm x 6mm Thick first

quality polish plate mirror complete with 25mm aluminium

edging all around mounted and including 13mm thick

waterproofed plywood backing, plugged and screwed to tile

wall with chromium plated dome headed screws

Approved decorative 1800mm x 2000mm x 6mm Thick first

quality polish plate mirror complete with 25mm aluminium

edging all around mounted and including 13mm thick

waterproofed plywood backing, plugged and screwed to tile

wall with chromium plated dome headed screws

BUILDING WORKS



SANITARY FITTINGS (CONT'D)

A Chrome plated 'Grohe 40364' essential hook No. 7 55.00

B Chrome plated 'Grohe 40366' essential towel rail No. 7 75.00

Testing

C

Item

Builder's Work In Connection With Services

D Overall size 600mm x 600mm x 200mm thick No 2 540.00

E Overall size 1000mm x 600mm x 200mm thick No 1 900.00

F Overall size 1200mm x 600mm x 200mm thick No 1 1,100.00

G Overall size 1400mm x 600mm x 200mm thick No 2 1,400.00

H Overall size 4800mm x 600mm x 200mm thick No 1 4,500.00

J Overall size 'L' shape 4500mm x 600mm x 200mm thick No 1 4,100.00


COLLECTION

C/SF/1

C/SF/2

SANITARY FITTINGS

CARRIED TO SUMMARY

C/SF/3

On completion of installation of sanitary fittings test all fittings make good any defects and leave the whole in perfect working and thesatisfaction of the S.O

Construct and complete reinforced concrete counter top slab with and including concrete, formwork, reinforcement, supporting brickwall ,etc and finished with approved tiles

AMOUNT

5,100.00

1,600.00

4,400.00

500.00

630.00

420.00

120.00

240.00

1,850.00

14,860.00

C/SF/1

AMOUNT

810.00

4,500.00

520.00

455.00

960.00

650.00

250.00

8,145.00

C/SF/2

AMOUNT

385.00

525.00

1,000.00

1,080.00

900.00

1,100.00

2,800.00

4,500.00

4,100.00

14,860.00

8,145.00

39,395.00

C/SF/3

BUILDING WORKS



SUNDRIES

###BUILT IN FURNITURE

Planter Box

A

No 1 700.0

SUNDRIESCARRIED TO SUMMARY

C/SUND/1

Construct and complete brick planter box 4500mm x 600mm x 750mm high including all necessary concrete bed, reinforcement, formwork, cement and sand screed, finished with 19mm thick plastering and paint as described, etc. all as shown on Architect's drawing

AMOUNT

700.00

700.00

C/SUND/1

BUILDING WORKS



WALL FINISHES

Externally

A 20mm Thick to wall and column m2 584

B 20mm Thick to docorative concrete copping m2 255

C Extra for forming PVC groove line m 2,406


To receive mosaic wall tiles

B 19mm Thick to swimming pool wall m2 53

C 19mm Thick to lower pool wall m2 37

D 19mm Thick to wading pool wall m2 9

E 19mm Thick to pond wall m2 70

To receive stonewall tiles

F 19mm Thick to stonewall finish with natural stone m2 182

J 19mm Thick to isolated column m2 22

G Swimming pool wall m2 53

H Lower pool wall m2 37

J Wading pool wall m2 9

K Pond wall m2 70

E To wall m2 182


200mm x 200mm x 5mm thick of approved mosaic wall tiles of approved quality, standard colour and pattern, bedded and jointed on cement and sand (1:3) backing screed (measured separately), tile adhesive (if necessary) and pointed with matching coloured cement to :-

Approved stonewall tiles with natural stone of approved quality, standard colour and pattern, bedded and jointed on cement and sand (1:3) backing screed (measured separately), tile adhesive (if necessary) and pointed with matching coloured cement to :-

BUILDING WORKS



J To isolated column m2 22


BQ1/WF/1


Externally (Cont'd)

A Plastered wall and column m2 584

L 20mm Thick to docorative concrete copping m2 255

Decorative Timber Board

B

m2 16

Prepare and apply sealer, one undercoat and two finishing coats of weathershield paint as described to :-

Supply and fix in position decorative timber board including painting works to architect's approval and to manufacturer detail

BUILDING WORKS




BQ1/WF/2

Internally

B 19mm Thick to wall and column m2 1,271


To receive ceramic wall tiles

C 19mm Thick to wall m2 401

To receive stonewall tiles

D 19mm Thick to stonewall finish with natural stone m2 26

E Wall and column m2 401

F To wall m2 26

G Plastered wall and column m2 1,271

Cement and sand (1:6) plaster mixed with an approved plasticiser finish with a steel trowel as described :-

200mm x 200mm x 5mm thick of approved glazed ceramic wall tiles of approved quality, standard colour and pattern, bedded and jointed on cement and sand (1:3) backing screed (measured separately), tile adhesive (if necessary) and pointed with matching coloured cement to :-

Approved stonewall tiles with natural stone of approved quality, standard colour and pattern, bedded and jointed on cement and sand (1:3) backing screed (measured separately), tile adhesive (if necessary) and pointed with matching coloured cement to :-

Prepare and apply sealer, one undercoat and two finishing coats of emulsion paint as described to :-

BUILDING WORKS




BQ1/WF/3


COLLECTION :-

BQ1/WF/1

BQ1/WF/2

BQ1/WF/3

BUILDING WORKS



WALL FINISHESCARRIED TO SUMMARY

BQ1/WF/4

RATE AMOUNT

80.00 4,240.00

80.00 2,960.00

80.00 720.00

80.00 5,600.00

270.00 49,140.00

RATE AMOUNT

270.00 5,940.00

68,600.00

BQ1/WF/1

300.00 4,800.00

RATE AMOUNT

4,800.00

BQ1/WF/2

90.00 36,090.00

270.00 7,020.00

RATE AMOUNT

52,710.00

BQ1/WF/3

68,600.00

52,710.00

RATE AMOUNT

121,310.00

BQ1/WF/4

BUILDING WORKS



FLOOR FINISHES

EXTERNALLY

A 20mm Thick to suspended slab m2 48


To receive sandstone finish tiles

B 20mm Thick to floor m2 22

To receive homogeneous tiles

C 20mm Thick to floor m2 24

To receive mosaic tiles

D 20mm Thick to swimming pool floor m2 42

E 20mm Thick to lower pool floor m2 11

F 20mm Thick to wading pool floor m2 14

G 20mm Thick to pond floor m2 60

To receive pebble wash

H 20mm Thick to floor m2 20

J 20mm Thick to suspended slab m2 48


K 20mm Thick to floor m2 17


B1/FF/1


BUILDING WORKS



FLOOR FINISHES (Cont'd)

EXTERNALLY (Cont'd)

A To floor m2 22 280.00

B To floor m2 24 190.00

C To swimming pool floor m2 42 80.00

D To lower pool floor m2 11 80.00

E To wading pool floor m2 14 80.00

F To pond floor m2 60 80.00

G To floor m2 20 30.00

H 20mm Thick to suspended slab m2 48 30.00


B1/FF/2

EXTERNALLY (Cont'd)

600mm x 600mm x 8mm Thick an approved sandstone finish

tiles as described of approved colour and pattern,

bedded, jointed and pointed in coloured cement and sand

(1:3) mortar complete with skirting as described to:-

600mm x 600mm x 8mm Thick an approved 'White Horse'

rough surface homogeneous tiles as described of approved

colour and pattern, bedded, jointed and pointed in coloured

cement and sand (1:3) mortar complete with skirting as

described to:-

300mm x 300mm x 8mm Thick an approved mosaic tiles as

described of approved colour and pattern, bedded, jointed

and pointed in coloured cement and sand (1:3) mortar to:-

An approved pebble wash as described of approved colour

and pattern, bedded, jointed and pointed in coloured

cement and sand (1:3) mortar on cement and sand to:-

BUILDING WORKS



A To floor m2 17 240.00

B To floor m2 17 12.00


B1/FF/3

INTERNALLY

Supply and fix approved solid timber flooring panel as described laid with approved pattern and colour including adhesive on and including 20mm thick cement and sand screed complete with timber skirting as described :-

Prepare and apply three coats of approved varnish to the following surfaces :-

BUILDING WORKS



A 20mm Thick to floor m2 4


To receive non-slip ceramic tiles

B 20mm Thick to floor m2 63

To receive compressed stone tiles

C 20mm Thick to floor m2 111

To receive honed marblem2 159

D 20mm Thick to floor


E 20mm Thick to floor m2 184

F To floor m2 63 150.00

G To floor m2 111 270.00


B1/FF/4

INTERNALLY (Cont'd)


300mm x 300mm x 8mm Thick an approved non-slip ceramic

tiles as described of approved colour and pattern,

bedded, jointed and pointed in coloured cement and sand

(1:3) mortar on cement and sand (1:3) screed complete with

skirting as described to:-

600mm x 600mm x 8mm Thick an approved compressed stone tiles as ds described of approved colour and pattern, bedded, jointed and pointed in coloured cement and sand (1:3) mortar on cement and sand (1:3) screed complete with skirting as described to:-

600mm x 600mm x 8mm Thick an approved honed marble as ds described of approved colour and pattern, bedded, jointed and pointed in coloured cement and sand (1:3) mortar on cement and sand (1:3) screed complete with skirting as described to:-

BUILDING WORKS



A To floor m2 159 340.00

B To floor m2 184 240.00

C To floor m2 184 12.00


B1/FF/5

FLOOR FINISHES

COLLECTION

600mm x 600mm x 8mm Thick an approved honed marble as ds described of approved colour and pattern, bedded, jointed and pointed in coloured cement and sand (1:3) mortar on cement and sand (1:3) screed complete with skirting as described to:-

Supply and fix approved solid timber flooring panel as described laid with approved pattern and colour including adhesive on and including 20mm thick cement and sand screed complete with timber skirting as described :-

Prepare and apply three coats of approved varnish to the following surfaces :-

BUILDING WORKS



B1/FF/1

B1/FF/2

B1/FF/3

B1/FF/4

B1/FF/5

FLOOR FINISHESCARRIED TO SUMMARY

B1/FF/6

AMOUNT

-

-

-

-

-

-

-

-

-

-

B1/FF/1

AMOUNT

6,160.00

4,560.00

3,360.00

880.00

1,120.00

4,800.00

600.00

1,440.00

22,920.00

B1/FF/2

AMOUNT

4,080.00

204.00

4,284.00

B1/FF/3

AMOUNT

-

-

-

-

-

9,450.00

29,970.00

39,420.00

B1/FF/4

AMOUNT

54,060.00

44,160.00

2,208.00

100,428.00

B1/FF/5

AMOUNT

-

22,920.00

4,284.00

39,420.00

100,428.00

167,052.00

B1/FF/6

BUILDING WORKS



CEILING FINISHES

EXTERNALLY

A 5mm Thick sides and soffit of beam m2 78

B

To flat area m2 25 80.00

INTERNALLY

C To ceiling m2 437 80.00

No. 2 80.00

D To ceiling m2 84 240.00

E To fibrous plaster ceiling m2 437 12.00

Prepare and apply 5mm Thick`Brefill -S & FW' or other equal and approved skim coat plastering with and including one coat of cement based paint and preparing backing surfaces to:-

An approved timber board panel as described fixed to timber

ceiling support construct of 50mm x 75mm hardwood ceiling

joist and spacer, set symmetrically from centre complete with

varnish finish all as per architect detail

Supply and install approved fibrous plaster ceiling complete with aluminium suspension system and all necessary fittings and fixed strictly in accordance with manufacturer's instruction and prepare opening to receive light (measured separately) including decoative cornice

EXTRA FOR forming services opening 600mm x 600mm and including additional framing system

An approved timber board panel as described fixed to timber

ceiling support construct of 50mm x 75mm hardwood ceiling

joist and spacer, set symmetrically from centre complete with

varnish finish all as per architect detail

Prepare and apply one undercoat sealer and two finishing coats of emulsion paint as described to :-

BUILDING WORKS



CEILING FINISHESCARRIED TO SUMMARY

B1/CL/1

AMOUNT

-

2,000.00

34,960.00

160.00

20,160.00

5,244.00

AMOUNT

62,524.00

B1/CL/1

bill of quantity banglow

Documents

Transcript of bill of quantity banglow