Bhoruka Gases -Consolidated julybhurukagases.com/wp-content/.../2014/09/Bhoruka-Gases-BROCURE...

BHURUKA GASESBhuruka Gases Limited is a world class facility, reputed as a manufacturer, importer and exporter of specialty, rare gas, industrial and liquid gas products. Operating in a SAP-R3 environment Bhuruka Gases was established in 1974 in Bangalore and has since been in Operation since as a independent, successful, dependable and quality conscious manufacturer

A UNIQUE RANGE THAT INCLUDE SPECIALTY, RARE GAS, INDUSTRIAL & LIQUID GAS PRODUCTS

General Manager (Operations)+91-80-41818217 +91- 80- 9886026079 [email protected]

For unsolved problems

General Manager (Marketing)+91- 80- 41818216 +91- 80- [email protected]

For bulk liquids

+91-80-41818245+91- 80- 9972744558/ 9611895926 [email protected]

For High Pure Hydrogen, Nitrogen, Mixture Gases

+91-80-41818213+91- 80- 9845640065/ [email protected]@bhurukagases.com

For Logistics

+91-80-41818220+91- 80- [email protected]

For Specialist & Calibration Gases

+91-80-41158736+91- [email protected]

For Technical Enquiry for Specialty & Calibration Gases

+91-80-41818237,41818218+91- 80- [email protected]@bhurukagases.com

For Pipline Projects & Gas Handling Systems

Bhuruka Gases LtdWhitefield Road, Mahadevapura PostBangalore 560048, Karnataka, IndiaPhone: +91 - 80 - 41818200 (50 Lines) Fax: +91 - 80 - 41148753/28524243 Email: [email protected] Website: www.bhurukagases.com

Chennai:Chennai Bottling Unit No 6th, North Terminus RoadTollgate, Chennai 600101Tamil Nadu, INDIAPhone: 044-25912172/ 25917006Mobile: +91 9941334023Email: [email protected]

Delhi: C/O IIHMR Building, 2 nd Floor, Plot No. 3 SAF Pocket, Sector 18A, Phase-IINear Veer Awas/ Kargil Apprt, DwarakaNew Delhi 110075, INDIAPhone: +91- 09350114842 Fax: +91 1130418906Email: [email protected]

RIGHT PRODUCT, EVERY TIME, ON [email protected]

Customer Complaints

Bhuruka is always focused on quality of pure gases in cylinders. To achieve this Bhuruka has a separate division

called SGD which is in operation for pure and mixture gases cylinder filling activities since 1980. The Division has

all the modern facilities like -cylinder preparation unit, cylinder filling unit, gas mixing unit, and a separate

analytical laboratory consisting of following equipments-

Trace Oxygen Analyzer (PPM Level Oxygen)

Spectra analyzer (PPM Level Nitrogen)

Hydrogen Analyzer (% Level Hydrogen)

Carbon Dioxide analyzer (% Level Co2)

Nitrogen Analyzer (% Level Nitrogen)

Moisture analyzer (Dew Point and PPM Level)

Argon Discharge Detector

Bhuruka is in the field of Air Separation Operation since 1975. The company has installed and kept on

upgrading the latest technology. The Latest Air Separation Unit (Linde Standard 3000) in operation

now has been designed and erected by Linde AG. This unit has all the latest technology to make it

highly reliable and lowest possible total - impurities (<1 ppm) in its products - Liquid Nitrogen and

Liquid Argon by cryogenic fractional distillation alone. Liquid Oxygen purity is achieved up to 99.9%

purity.

As a noble gas Argon is inert and does not react very fast with other elements or compounds

Argon is colorless in gas and liquid state

Argon boiling point is -186 deg. C

Argon density is 1.784 g / L at 0 deg. C

Argon is heavier than air.

Argon is slightly soluble in water at 0 deg. C and 1 atmosphere pressure

P H Y S I C A L P R O P E R T I E S C H E M I C A L P R O P E R T I E S

OXYGENP H Y S I C A L P R O P E R T I E S C H E M I C A L P R O P E R T I E S

It has cubic crystal structure Oxygen is the essential element in the respiratory process of most of the living cell and in combustion process

Oxygen gas is colorless, odor less and tasteless Oxygen supports combustion, combines with most elements, and is component of hundreds of thousands of organic compounds

Oxygen boiling point is -183 deg. C

Oxygen melting point is -218.4 deg. C

Oxygen density is 1.429 g / L at 0 deg. C

Oxygen very reactive oxidizing agent

Para magnetism is strong

Comprises 20.94 % by volume of the atmospheric air

NITROGENP H Y S I C A L P R O P E R T I E S C H E M I C A L P R O P E R T I E S

Nitrogen is gas with out any color, taste and also with out any smell.

Nitrogen is an inert gas

Nitrogen boiling point is -195.8 deg. C

Nitrogen melting point is - 210 deg. C

Nitrogen has the soluble property; it is lesssoluble in water

Nitrogen density is 1.251 g / L at 0 deg. C

Nitrogen can combined with other element and form some compoundsunder certain temperature.

In accordance with oxygen, Nitrogen forms Nitrogen di–oxide as well as Nitric Acid

Nitrogen combined with the Hydrogen, it forms Ammonia and with Sulfur it forms

Nitrogen Sulfide

Nitrogen combined with certain metals at high temperature which forms the active metals such as lithium and magnesium.

Nitrogen is non flammable compound which does not support the combustion

SPECIAL GASES DIVISION

AIR SEPARATION UNIT

To cater the need of various types of customers Bhuruka has a big list of product packaging, transporting, handling,

Engineering Support, Safety etc.

Range of Gas Cylinders - From 0.45 L to 50 L WC and pressure up to 200bar.

Range of Gas Cylinders Pellets and Trolley - From a bunch of 9 cylinders to 50 cylinders mobile bank.

Range of Mobile Liquid Cylinders - Up to 200 L

Range of Bulk Liquid Tankers - Cryogenic road tankers up to 13 KL capacity

Range of Bulk Storage at Customer place - Cryogenic VIE up to 13 KL capacity

Range of Bulk Storage at Customer place - Cryogenic VIE 1 KL capacity

Transportation of Cylinders - Company has hired vehicles with carrying capacity from 20 cylinders to 120 cylinders.

Transportation of Liquid Cylinders - Company hired vehicles with carrying capacity from one Liquid cylinder to six Liquid cylinders.

Transportation of Liquid Road Tankers - Company own cryogenic vessels up to 13 KL capacity are mounted on road tankers for transportation Liquid Oxygen, Liquid Nitrogen and Liquid Argon to cater the need of Bulk users.

Safety Compliances and Training - Bhuruka follow the rule of law and take care of requisite safety norms. Personnel at all level are trained enough to handle the product and equipments safely.

PRODUCTS SERVICES

Linde Standard 3000 Air Separation Unit accounts for the lowest possible total impurities [< 1ppm]

Bhuruka is always focused on quality of pure gases in cylinders. To achieve this Bhuruka has a separate division

called SGD which is in operation for pure and mixture gases cylinder filling activities since 1980. The Division has

all the modern facilities like -cylinder preparation unit, cylinder filling unit, gas mixing unit, and a separate

analytical laboratory consisting of following equipments-

Trace Oxygen Analyzer (PPM Level Oxygen)

Spectra analyzer (PPM Level Nitrogen)

Hydrogen Analyzer (% Level Hydrogen)

Carbon Dioxide analyzer (% Level Co2)

Nitrogen Analyzer (% Level Nitrogen)

Moisture analyzer (Dew Point and PPM Level)

Argon Discharge Detector

Bhuruka is in the field of Air Separation Operation since 1975. The company has installed and kept on

upgrading the latest technology. The Latest Air Separation Unit (Linde Standard 3000) in operation

now has been designed and erected by Linde AG. This unit has all the latest technology to make it

highly reliable and lowest possible total - impurities (<1 ppm) in its products - Liquid Nitrogen and

Liquid Argon by cryogenic fractional distillation alone. Liquid Oxygen purity is achieved up to 99.9%

purity.

As a noble gas Argon is inert and does not react very fast with other elements or compounds

Argon is colorless in gas and liquid state

Argon boiling point is -186 deg. C

Argon density is 1.784 g / L at 0 deg. C

Argon is heavier than air.

Argon is slightly soluble in water at 0 deg. C and 1 atmosphere pressure

P H Y S I C A L P R O P E R T I E S C H E M I C A L P R O P E R T I E S

OXYGENP H Y S I C A L P R O P E R T I E S C H E M I C A L P R O P E R T I E S

It has cubic crystal structure Oxygen is the essential element in the respiratory process of most of the living cell and in combustion process

Oxygen gas is colorless, odor less and tasteless Oxygen supports combustion, combines with most elements, and is component of hundreds of thousands of organic compounds

Oxygen boiling point is -183 deg. C

Oxygen melting point is -218.4 deg. C

Oxygen density is 1.429 g / L at 0 deg. C

Oxygen very reactive oxidizing agent

Para magnetism is strong

Comprises 20.94 % by volume of the atmospheric air

NITROGENP H Y S I C A L P R O P E R T I E S C H E M I C A L P R O P E R T I E S

Nitrogen is gas with out any color, taste and also with out any smell.

Nitrogen is an inert gas

Nitrogen boiling point is -195.8 deg. C

Nitrogen melting point is - 210 deg. C

Nitrogen has the soluble property; it is lesssoluble in water

Nitrogen density is 1.251 g / L at 0 deg. C

Nitrogen can combined with other element and form some compoundsunder certain temperature.

In accordance with oxygen, Nitrogen forms Nitrogen di–oxide as well as Nitric Acid

Nitrogen combined with the Hydrogen, it forms Ammonia and with Sulfur it forms

Nitrogen Sulfide

Nitrogen combined with certain metals at high temperature which forms the active metals such as lithium and magnesium.

Nitrogen is non flammable compound which does not support the combustion

SPECIAL GASES DIVISION

AIR SEPARATION UNIT

To cater the need of various types of customers Bhuruka has a big list of product packaging, transporting, handling,

Engineering Support, Safety etc.

Range of Gas Cylinders - From 0.45 L to 50 L WC and pressure up to 200bar.

Range of Gas Cylinders Pellets and Trolley - From a bunch of 9 cylinders to 50 cylinders mobile bank.

Range of Mobile Liquid Cylinders - Up to 200 L

Range of Bulk Liquid Tankers - Cryogenic road tankers up to 13 KL capacity

Range of Bulk Storage at Customer place - Cryogenic VIE up to 13 KL capacity

Range of Bulk Storage at Customer place - Cryogenic VIE 1 KL capacity

Transportation of Cylinders - Company has hired vehicles with carrying capacity from 20 cylinders to 120 cylinders.

Transportation of Liquid Cylinders - Company hired vehicles with carrying capacity from one Liquid cylinder to six Liquid cylinders.

Transportation of Liquid Road Tankers - Company own cryogenic vessels up to 13 KL capacity are mounted on road tankers for transportation Liquid Oxygen, Liquid Nitrogen and Liquid Argon to cater the need of Bulk users.

Safety Compliances and Training - Bhuruka follow the rule of law and take care of requisite safety norms. Personnel at all level are trained enough to handle the product and equipments safely.

PRODUCTS SERVICES

Linde Standard 3000 Air Separation Unit accounts for the lowest possible total impurities [< 1ppm]

The Following Specifications Shall Be Applicable for Marketting Our Gaseous/ Liquid Products

BHURUKA - SPECTRO

BHURUKA - I

BHURUKA - II

BHURUKA - III

BHURUKA - COMMERCIAL

LIQUID

99.9996

99.9993

99.9985

99.9960

99.9950

99.999

O2 H2O CO

MAXIMUM IMPURITY LEVELS ( PPM BY VOLUME )PRODUCT

TOTALIMPURITIES

IN PPM

PURITY IN %

BHURUKA - I

BHURUKA - II

BHURUKA - III

99.9943

99.9909

99.9864

O2 H2O CO

MAXIMUM IMPURITY LEVELS ( PPM BY VOLUME )PRODUCT TOTALIMPURITIES

IN PPM

PURITY IN %

HYDROGEN

BHURUKA - HP

OXYGEN- IP

LIQUID- INDUSTRIAL

LIQUID-MEDICAL

200 1700

99.8300

99.5000

99.7000

99.5000

H2O Co2 N2

IN PPM

PURITY IN %

OXYGEN

BHURUKA - ZERO

ZERO AIR

THCCo2 + CO

BHURUKA - I

BHURUKA - II

BHURUKA - III

LIQUID- COMMERCIAL

O2 H2O AR

IN PPM

PURITY IN %

Co2 + CO

LIQUID- HIGH PURITY

6 6 4 8

99.5000

99.9000

2 2 1 3 8 99.9990.2

NITROGEN

Product Specifications

99.9992

99.9982

25 99.99751

Bhuruka has manufacturing facility for high pure Hydrogen, high pure Oxygen and calibration gasses at Harohally near

Kanakpura to meet the customer demand. Bhuruka has got full fledged facilities with latest technology with all safety

requirements.

HAROHALLY PLANT

CHENNAI PLANTTo augment the capacity, Bhuruka has purchased land near Manali, Chennai. We have built bottling unit for Oxygen,

Argon and a ware house for Specialty and Calibration gases.

COMPLETED PROJECTS

Bhuruka is in the field of High Purity Hydrogen gas manufacturing

operation since 1978. Bhuruka produces Hydrogen by Electrolysis of

Water. Based on growing demand of High Purity Hydrogen Bhuruka has

commissioned a latest technology Hydrogen Generation unit from M/s

Teledyne USA. At present Bhuruka have all the facilities to fill and certify

the Hydrogen gas up to 99.9995% purity (total impurities less than 5 ppm).

HYDROGEN PLANTELECTROLYSIS OF WATER

The Following Specifications Shall Be Applicable for Marketting Our Gaseous/ Liquid Products

BHURUKA - SPECTRO

BHURUKA - I

BHURUKA - II

BHURUKA - III

LIQUID

99.9996

99.9993

99.9985

99.9960

99.9950

99.999

O2 H2O CO

TOTALIMPURITIES

IN PPM

PURITY IN %

BHURUKA - I

BHURUKA - II

BHURUKA - III

99.9943

99.9909

99.9864

O2 H2O CO

IN PPM

PURITY IN %

HYDROGEN

BHURUKA - HP

OXYGEN- IP

LIQUID- INDUSTRIAL

LIQUID-MEDICAL

200 1700

99.8300

99.5000

99.7000

99.5000

H2O Co2 N2

IN PPM

PURITY IN %

OXYGEN

BHURUKA - ZERO

ZERO AIR

THCCo2 + CO

BHURUKA - I

BHURUKA - II

BHURUKA - III

LIQUID- COMMERCIAL

O2 H2O AR

IN PPM

PURITY IN %

Co2 + CO

LIQUID- HIGH PURITY

6 6 4 8

99.5000

99.9000

2 2 1 3 8 99.9990.2

NITROGEN

Product Specifications

99.9992

99.9982

25 99.99751

Bhuruka has manufacturing facility for high pure Hydrogen, high pure Oxygen and calibration gasses at Harohally near

Kanakpura to meet the customer demand. Bhuruka has got full fledged facilities with latest technology with all safety

requirements.

HAROHALLY PLANT

CHENNAI PLANTTo augment the capacity, Bhuruka has purchased land near Manali, Chennai. We have built bottling unit for Oxygen,

Argon and a ware house for Specialty and Calibration gases.

COMPLETED PROJECTS

Bhuruka is in the field of High Purity Hydrogen gas manufacturing

operation since 1978. Bhuruka produces Hydrogen by Electrolysis of

Water. Based on growing demand of High Purity Hydrogen Bhuruka has

commissioned a latest technology Hydrogen Generation unit from M/s

Teledyne USA. At present Bhuruka have all the facilities to fill and certify

the Hydrogen gas up to 99.9995% purity (total impurities less than 5 ppm).

HYDROGEN PLANTELECTROLYSIS OF WATER

TESTING

Gases are filled in seamless steel Cylinders at high pressure ranging from 150 to 200 bar. Such cylinders are also subjected to various weather conditions and handling during use at consumer's place as well as during transport, loading and unloading.

Essentially, the cylinders are made of a material that has a flexibility of expansion and contraction during pressurization. For various reasons this flexibility of expansion and contraction begins to deteriorate over a period of time. Similarly, on account of other conditions such as filling, handling, transportation and shop floor conditions there are chances of Weight reduction over a period of time. It may also develop certain other defects normally rendering a cylinder unsafe for use.

Globally such cylinders are required to be periodically tested for visual damages, weight loss and loss of elasticity. In view of the dimension of damage, which can be caused by a bad cylinder, being known, most people prefer to test these high-pressure cylinders periodically and is a mandatory requirement for safety.

We have a full-fledged 'GAS CYLINDERS HYDROLYIC TEST-SHOP' equipped with latest equipments & instruments to carry out inspection, Hydraulic testing & required up keeping of cylinders. Our Test shop is also equipped with drying of the cylinders using dry High Pure Nitrogen gas from our ASU.

Testing and periodical inspection of cylinders at test shop

CYLINDER TUMBLER

INTERNAL SHOT BLASTER

UHP HELIUM PURIFICATION UNIT

FIRST IN INDIA

G A S S P E C I F I C A T I O N S

Ultrahigh Purity Helium 99.9999%O2

Co2 + COTHC

Moisture

< 0.5 ppm

< 0.2 ppm

< 0.1 ppm

< 0.5 ppm

HYDROGEN

FIRST IN INDIA

The direction of cylinder rotation may be reversed easily. Cylinders can be rolled into the

VST-9 and easily tilted to the horizontal position for tumbling. The VST-9 is also capable

of tumbling 2 or 3 smaller cylinders simultaneously when the machine is loaded in the

horizontal position

The ISB thoroughly and efficiently cleans the cylinder interior in two to ten minutes. The

ISB-1D also protects cylinder life by removing only the rust, scale and corrosion from

the cylinder interior, leaving the cylinder wall intact.

Bhuruka Gases ltd has developed exclusive technology to purify Helium up to 99.9999% purity. The product can be filled into 50 lts WC cylinders up to 200 bar pressure. We have very good analysis facility to analyze the impurities up to 50 ppb level and the standards are traceable to NIST/NPL. We plan to supply to various Laboratories and Industries in India and Abroad. Specification of Helium 5.5 grade, 6.0 grade is as follows.

Bhuruka Gases ltd has developed exclusive technology to purify Hydrogen up to 99.9999% purity. The product can be filled into 47 lts WC cylinders up to 150 bar pressure. We have very good analysis facility to analyze the impurities up to 50 ppb level and the standards are traceable to NIST/NPL. We plan to supply to various Laboratories and Industries in India and Abroad. Specification of Hydrogen5.5 grade, 6.0 grade is as follows.

Oxygen

Co+ co2Moisture

0.5 ppm

0.1 ppm

0.5 ppm

Nitrogen 5 ppm 2 ppm 0.5 ppm

Purity Specification 99.9999%99.9995%99.999%

0.2 ppm 0.2 ppm 0.1 ppm

TESTING

Gases are filled in seamless steel Cylinders at high pressure ranging from 150 to 200 bar. Such cylinders are also subjected to various weather conditions and handling during use at consumer's place as well as during transport, loading and unloading.

Essentially, the cylinders are made of a material that has a flexibility of expansion and contraction during pressurization. For various reasons this flexibility of expansion and contraction begins to deteriorate over a period of time. Similarly, on account of other conditions such as filling, handling, transportation and shop floor conditions there are chances of Weight reduction over a period of time. It may also develop certain other defects normally rendering a cylinder unsafe for use.

Globally such cylinders are required to be periodically tested for visual damages, weight loss and loss of elasticity. In view of the dimension of damage, which can be caused by a bad cylinder, being known, most people prefer to test these high-pressure cylinders periodically and is a mandatory requirement for safety.

We have a full-fledged 'GAS CYLINDERS HYDROLYIC TEST-SHOP' equipped with latest equipments & instruments to carry out inspection, Hydraulic testing & required up keeping of cylinders. Our Test shop is also equipped with drying of the cylinders using dry High Pure Nitrogen gas from our ASU.

Testing and periodical inspection of cylinders at test shop

CYLINDER TUMBLER

INTERNAL SHOT BLASTER

UHP HELIUM PURIFICATION UNIT

FIRST IN INDIA

Ultrahigh Purity Helium 99.9999%O2

Co2 + COTHC

Moisture

< 0.5 ppm

< 0.2 ppm

< 0.1 ppm

< 0.5 ppm

HYDROGEN

FIRST IN INDIA

The direction of cylinder rotation may be reversed easily. Cylinders can be rolled into the

VST-9 and easily tilted to the horizontal position for tumbling. The VST-9 is also capable

of tumbling 2 or 3 smaller cylinders simultaneously when the machine is loaded in the

horizontal position

The ISB thoroughly and efficiently cleans the cylinder interior in two to ten minutes. The

ISB-1D also protects cylinder life by removing only the rust, scale and corrosion from

the cylinder interior, leaving the cylinder wall intact.

Bhuruka Gases ltd has developed exclusive technology to purify Helium up to 99.9999% purity. The product can be filled into 50 lts WC cylinders up to 200 bar pressure. We have very good analysis facility to analyze the impurities up to 50 ppb level and the standards are traceable to NIST/NPL. We plan to supply to various Laboratories and Industries in India and Abroad. Specification of Helium 5.5 grade, 6.0 grade is as follows.

Bhuruka Gases ltd has developed exclusive technology to purify Hydrogen up to 99.9999% purity. The product can be filled into 47 lts WC cylinders up to 150 bar pressure. We have very good analysis facility to analyze the impurities up to 50 ppb level and the standards are traceable to NIST/NPL. We plan to supply to various Laboratories and Industries in India and Abroad. Specification of Hydrogen5.5 grade, 6.0 grade is as follows.

Oxygen

Co+ co2Moisture

0.5 ppm

0.1 ppm

0.5 ppm

Nitrogen 5 ppm 2 ppm 0.5 ppm

Purity Specification 99.9999%99.9995%99.999%

0.2 ppm 0.2 ppm 0.1 ppm

UHP OXYGEN PLANTWe are the only manufacturer of hydrocarbon free ultra high pure oxygen (99.999%) in India.Oxygen is used in calibration gas mixtures for petrochemical industry; environmental emission monitoring, industrial hygiene or safety monitors and trace impurity analyzers.

Oxygen is used in bomb calorimeters to measure the PCI of hydrocarbons or coal and in oxidation reactions.

Ultra-pure oxygen is used to oxidize certain materials, such as Si to SiO2, or ashing of photo resists and to achieve chemical vapor deposition of oxides. It is also used to make ozone for oxidations or cleaning.

UHP Grade is used for organic and inorganic chemical synthesis. Zero Grade is used as a fuel gas in various types of chemical analyzers.

Purity Specification 4.0 - 99.99% 5.0 - 99.999%Nitrogen + Argon

CO+CO2

MoistureTotal Impurities

< 2.0<100

< 2.0 < 10

FIRST IN INDIA

UHP METHANE PLANTWe ensure the production of high purity methane using a cryogenic method developed and commission by European company. Particulates are removed from the basic raw material, which is then repeatedly cooled. Water, heavy hydrocarbons and carbon dioxide, sulphur and mercaptans are then removed. With further processing, the basic raw material eventually becomes a liquid and the liquid methane is separated by cryogenic distillation. Purified liquid methane is collected and stored.

FIRST IN INDIA

Purity SpecificationNitrogen

Oxygen

Other Hydrocarbons

2.5 - 99.5% 3.7 - 99.97% 4.5 - 99.995% 5.0 - 99.999% 5.5 - 99.9995%

< 2000< 50

< 2500

< 5000

UHP OXYGEN PLANTWe are the only manufacturer of hydrocarbon free ultra high pure oxygen (99.999%) in India.Oxygen is used in calibration gas mixtures for petrochemical industry; environmental emission monitoring, industrial hygiene or safety monitors and trace impurity analyzers.

Oxygen is used in bomb calorimeters to measure the PCI of hydrocarbons or coal and in oxidation reactions.

Ultra-pure oxygen is used to oxidize certain materials, such as Si to SiO2, or ashing of photo resists and to achieve chemical vapor deposition of oxides. It is also used to make ozone for oxidations or cleaning.

UHP Grade is used for organic and inorganic chemical synthesis. Zero Grade is used as a fuel gas in various types of chemical analyzers.

Purity Specification 4.0 - 99.99% 5.0 - 99.999%Nitrogen + Argon

CO+CO2

< 2.0<100

< 2.0 < 10

FIRST IN INDIA

UHP METHANE PLANTWe ensure the production of high purity methane using a cryogenic method developed and commission by European company. Particulates are removed from the basic raw material, which is then repeatedly cooled. Water, heavy hydrocarbons and carbon dioxide, sulphur and mercaptans are then removed. With further processing, the basic raw material eventually becomes a liquid and the liquid methane is separated by cryogenic distillation. Purified liquid methane is collected and stored.

FIRST IN INDIA

Purity SpecificationNitrogen

Oxygen

Other Hydrocarbons

2.5 - 99.5% 3.7 - 99.97% 4.5 - 99.995% 5.0 - 99.999% 5.5 - 99.9995%

< 2000< 50

< 2500

< 5000

SPECIALITY AND CALIBRATION GASES DIVISIONCalibration Gases Division, a unit of Bhuruka Gases Ltd, was set up in the year 1990, with Technical Know-how from Spantech U.K. It is the first Indian Plant to get ISO 9001-:2008 Certification in this sector and first laboratory in this sector has NABL (ISO/IEC 17025) accreditation. Bhuruka gases Ltd is a recognized leader in the production of specialty gas mixtures (called calibration gases) in India. We are well equipped with highly precision gravimetric equipments, Gas Booster Pumps, Modern Filling Benches, Blending Equipments and Sophisticated Gas Chromatographs (to meet a wide range of measurement and process control requirements. It produces highly accurate and stable gas mixtures containing component concentrations as low as parts-per-billion.

Gas mixture classes are characterized by the degree of accuracy, level of traceability, blend tolerance, process accuracy, analytical accuracy and other critical parameters. With BHURUKA gas mixtures and liquids, you have complete control over your calibration and process control standards—you can get the right gas mixture with the characteristics that are most appropriate for your use, without sacrificing performance and without paying for tighter specifications than your application requires.

High Purity Carrier gases up to 99.9999% purity

High purity rare gases like Krypton, Xenon, and Neon etc

High purity hydrocarbon and inorganic gases (imported)

High purity electronic gases

High quality laser gas Mixtures

NIST Traceable Primary reference Standards

Certified gas and liquid mixtures up to 30 components.

Any combination and concentration of mixtures with in the limits of Physics and Chemistry.

6.0 grade purity gas regulators (imported)

High pressure industrial gas cylinders

Pipeline projects and gas Handling equipments for laboratory

Cylinder trolleys, high pressure valves, valve adaptors

Purification Panels for carrier gases

PRODUCTS

The gas and liquid mixtures are made to any concentration within the permissible limits of Physics and Chemistry. These mixtures are non-explosive, non-reactive, stable mixture of gases in wide range of packaging from 0.5 liters to 50 liters water capacity aluminum/carbon steel cylinders.

We manufacture over 5000 types of gas mixtures and cater to more than 1000 customers all over India.

Certified Gas and Liquid Mixtures CALIBRATION GASES

Freedom from impurities is the most important factor when selecting gas for your laser application. Gas purity affects the performance and reliability of your laser as well as the lifespan of your optics and output power. BHURUKA GASES LTD pioneered the industry standard for effective, consistent control of impurities. Our LASER mixtures gases are prepared under strict quality control procedures that virtually eliminate impurities such as moisture, hydrocarbons and particulates.We manufacture laser mixtures by understanding the requirements.

Even traces of moisture or hydrocarbons can impair operation.Hydrocarbons can damage sensitive and expensive optical components.Moisture disturbs the excitation discharge and disables the laser from achieving its full efficiency.The formation of acid molecules can lead to corrosion damage.Dust particles can scatter the laser light, thereby disrupting the process.And the gas supply system must also satisfy the purity requirements as well.

We use high purity Nitrogen -99.9998% manufactured from Linde ASU plant. We use high purity carbon dioxide -99.995% imported from various countries. We use high purity Helium-99.999% for gas mixtures. Moisture content will be < 2 PPM, Hydrocarbon is less than 0.2 PPM, 5 Micron filters used to avoid the dust particle in the product and cylinder internal condition is thoroughly inspected and properly prepared..

Certified Gas and Liquid Mixtures LASER GAS MIXTURES

The use of high purity gases results in better sensitivity and longer column and gas trap life. Higher carrier gas purities become more important when the GC is operated near its sensitivity limit.

The main gas impurities of concern are oxygen, water and hydrocarbons. While higher levels of all three species degrade sensitivity, oxygen and water accelerate stationary phase degradation, especially at higher column temperatures.

Gas cylinders should be changed when they reach 10% of their original pressure. This also helps to prevent complete exhaustion of the cylinder and subsequent heating of the column without carrier gas flow. This results in rapid and severe column damage.

HIGH PURITY CARRIER GASES UP TO 99.9999% PURITY

BHURUKA Gases offers several grades of calibration gas standards – Custom Mixtures, Certified Standards, and Primary reference Standards to meet the level of accuracy for your laboratory or production process. All Specialty Gases are custom-mixed and analyzed, and then properly labeled in our independently audited laboratory facilities. Our production facility conforms to a strict set of quality-assurance measures and standard operating procedures. Our lab has been thoroughly inspected, certified and documented to be compliant with ISO/IEC 17025 requirements. We procure the Primary reference materials directly from NIST /NPL UK having an accuracy of 0.2 % - 0.5% and we have NIST certified weights procured from USA.

All Mixtures from 100 ppm to 99.99% with 1% certificate accuracy mixture can be made with NIST certified weights. We are the competent company in India to certify 1% mixture.

To achieve minimum Blend tolerance and to minimize uncertainty we use:

High purity raw materials through Linde A.G. Technology PlantProperly prepared cylinders with good internal surfaceSophisticated Equipments to handle ppb level mixtures Right blending methods Accurate Instruments and Accurate Standards

NIST TRACEABLE PRIMARY REFERENCE STANDARDS

BHURUKA is the India's largest manufacturer of rare gas mixtures for incandescent, fluorescent, and

high intensity discharge (HID) lamps.BHURUKA manufactures and exports the highest accuracy and purity rare gas mixtures. Quality, consistency, and purity are always incorporated throughout BHURUKA production and laboratory facilities during the creation of each multi-component gas mixture. We manufacture various lighting gas mixtures with various combinations of gas components and levels of concentrations, such as:

LIGHTING GAS MIXTURES

Kr-75% +Ar BAL Kr-50% +Ar BAL Kr-10% +Ar BAL

Kr-20% +Ar BAL Neon 20 % +BAL Ar Neon 30 % +BAL Ar

Neon 40 % +BAL Ar Xe-8% +N2-29% +BAL Ar

SPECIALITY AND CALIBRATION GASES DIVISIONCalibration Gases Division, a unit of Bhuruka Gases Ltd, was set up in the year 1990, with Technical Know-how from Spantech U.K. It is the first Indian Plant to get ISO 9001-:2008 Certification in this sector and first laboratory in this sector has NABL (ISO/IEC 17025) accreditation. Bhuruka gases Ltd is a recognized leader in the production of specialty gas mixtures (called calibration gases) in India. We are well equipped with highly precision gravimetric equipments, Gas Booster Pumps, Modern Filling Benches, Blending Equipments and Sophisticated Gas Chromatographs (to meet a wide range of measurement and process control requirements. It produces highly accurate and stable gas mixtures containing component concentrations as low as parts-per-billion.

Gas mixture classes are characterized by the degree of accuracy, level of traceability, blend tolerance, process accuracy, analytical accuracy and other critical parameters. With BHURUKA gas mixtures and liquids, you have complete control over your calibration and process control standards—you can get the right gas mixture with the characteristics that are most appropriate for your use, without sacrificing performance and without paying for tighter specifications than your application requires.

High Purity Carrier gases up to 99.9999% purity

High purity rare gases like Krypton, Xenon, and Neon etc

High purity hydrocarbon and inorganic gases (imported)

High purity electronic gases

High quality laser gas Mixtures

NIST Traceable Primary reference Standards

Certified gas and liquid mixtures up to 30 components.

Any combination and concentration of mixtures with in the limits of Physics and Chemistry.

6.0 grade purity gas regulators (imported)

High pressure industrial gas cylinders

Pipeline projects and gas Handling equipments for laboratory

Cylinder trolleys, high pressure valves, valve adaptors

Purification Panels for carrier gases

PRODUCTS

The gas and liquid mixtures are made to any concentration within the permissible limits of Physics and Chemistry. These mixtures are non-explosive, non-reactive, stable mixture of gases in wide range of packaging from 0.5 liters to 50 liters water capacity aluminum/carbon steel cylinders.

We manufacture over 5000 types of gas mixtures and cater to more than 1000 customers all over India.

Certified Gas and Liquid Mixtures CALIBRATION GASES

Freedom from impurities is the most important factor when selecting gas for your laser application. Gas purity affects the performance and reliability of your laser as well as the lifespan of your optics and output power. BHURUKA GASES LTD pioneered the industry standard for effective, consistent control of impurities. Our LASER mixtures gases are prepared under strict quality control procedures that virtually eliminate impurities such as moisture, hydrocarbons and particulates.We manufacture laser mixtures by understanding the requirements.

Even traces of moisture or hydrocarbons can impair operation.Hydrocarbons can damage sensitive and expensive optical components.Moisture disturbs the excitation discharge and disables the laser from achieving its full efficiency.The formation of acid molecules can lead to corrosion damage.Dust particles can scatter the laser light, thereby disrupting the process.And the gas supply system must also satisfy the purity requirements as well.

We use high purity Nitrogen -99.9998% manufactured from Linde ASU plant. We use high purity carbon dioxide -99.995% imported from various countries. We use high purity Helium-99.999% for gas mixtures. Moisture content will be < 2 PPM, Hydrocarbon is less than 0.2 PPM, 5 Micron filters used to avoid the dust particle in the product and cylinder internal condition is thoroughly inspected and properly prepared..

Certified Gas and Liquid Mixtures LASER GAS MIXTURES

The use of high purity gases results in better sensitivity and longer column and gas trap life. Higher carrier gas purities become more important when the GC is operated near its sensitivity limit.

The main gas impurities of concern are oxygen, water and hydrocarbons. While higher levels of all three species degrade sensitivity, oxygen and water accelerate stationary phase degradation, especially at higher column temperatures.

Gas cylinders should be changed when they reach 10% of their original pressure. This also helps to prevent complete exhaustion of the cylinder and subsequent heating of the column without carrier gas flow. This results in rapid and severe column damage.

HIGH PURITY CARRIER GASES UP TO 99.9999% PURITY

BHURUKA Gases offers several grades of calibration gas standards – Custom Mixtures, Certified Standards, and Primary reference Standards to meet the level of accuracy for your laboratory or production process. All Specialty Gases are custom-mixed and analyzed, and then properly labeled in our independently audited laboratory facilities. Our production facility conforms to a strict set of quality-assurance measures and standard operating procedures. Our lab has been thoroughly inspected, certified and documented to be compliant with ISO/IEC 17025 requirements. We procure the Primary reference materials directly from NIST /NPL UK having an accuracy of 0.2 % - 0.5% and we have NIST certified weights procured from USA.

All Mixtures from 100 ppm to 99.99% with 1% certificate accuracy mixture can be made with NIST certified weights. We are the competent company in India to certify 1% mixture.

To achieve minimum Blend tolerance and to minimize uncertainty we use:

High purity raw materials through Linde A.G. Technology PlantProperly prepared cylinders with good internal surfaceSophisticated Equipments to handle ppb level mixtures Right blending methods Accurate Instruments and Accurate Standards

NIST TRACEABLE PRIMARY REFERENCE STANDARDS

BHURUKA is the India's largest manufacturer of rare gas mixtures for incandescent, fluorescent, and

high intensity discharge (HID) lamps.BHURUKA manufactures and exports the highest accuracy and purity rare gas mixtures. Quality, consistency, and purity are always incorporated throughout BHURUKA production and laboratory facilities during the creation of each multi-component gas mixture. We manufacture various lighting gas mixtures with various combinations of gas components and levels of concentrations, such as:

LIGHTING GAS MIXTURES

Kr-75% +Ar BAL Kr-50% +Ar BAL Kr-10% +Ar BAL

Kr-20% +Ar BAL Neon 20 % +BAL Ar Neon 30 % +BAL Ar

Neon 40 % +BAL Ar Xe-8% +N2-29% +BAL Ar

INFRASTRUCTURE Calibration gases division has separate infrastructure which includes production facility for manufacture of Calibration gases mixtures of very high accuracy. We have Gas filling benches for each category of gas mixture. Our Gas chromatograph Laboratory has many GC's with different detectors like TCD, FID, DID, ECD and PFPD. We have different analyzers for NOX mixtures, Oxygen PPM and Percentage level analyzers, and Moisture meter.

Raw Materials are pre- analyzed to ensure that the final outcome of the gas mixture meets your specification for purity, accuracy and stability. Balance gases for mixtures are 99.999% (N5.0) or higher where appropriate.

We handle over 100 different types of gases and liquid chemicals to produce varieties of Gas / Liquid mixtures to serve the ever increasing need of Industries and Institutions.

Products

ARGON UHP 5.7

NITROGEN UHP 5.7

HYDROGEN 5.5

HYDROGEN 5.0

HYDROGEN UHP

0XYGEN -99.99%

HELIUM

HELIUM - 5.5 GRADE

HELIUM - 5.0 GRADE

UHP GRADE AIR

OXYGEN - 5.0

HELIUM - 4.5 GRADE

Carbon Dioxide+ Carbon Monoxide

Carbon Monoxide+ Carbon Dioxide

Impurities

Purity

Oxygen

Moisture

Nitrogen

Purity

Oxygen

Moisture

Purity

Oxygen

Moisture

Nitrogen

Purity

Oxygen

Moisture

Nitrogen

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Moisture

Nitrogen

Carbon Monoxide

Carbon Dioxide

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Moisture

Purity

Argon +Nitrogen

Moisture

Co2 + CO

Purity

Oxygen

Moisture

Nitrogen

Carbon Monoxide + Co2

Purity / Concentration In PPM

CO + CO2

≥ 99.9997 %

≤ 0.1

≤ 0.5

≥ 99.9997 %

≤ 0.1

≤ 0.5

≥ 99.9995 %

≤ 0.2

≥ 99.999 %

≤ 0.2

≥ 99.995 %

≤ 0.5

≤ 40

≤ 0.5

≥ 99.99 %

≤ 95

≥ 99.9999 %

≤ 0.5

≤ 0.1

≤ 0.5

≤ 0.1

≤ 0.5

≥ 99.9995 %

≤ 0.5

≥ 99.999 %

≤ 0.5

≥ 99.999 %

≤ 0.1

≤ 0.5

≥ 99.995 %

≤ 8 ppm

≤ 2 ppm

≤ 0.2ppm

≤ 0.5 ppm

≥ 99.995 %

≤ 30

≤ 0.5

INFRASTRUCTURE Calibration gases division has separate infrastructure which includes production facility for manufacture of Calibration gases mixtures of very high accuracy. We have Gas filling benches for each category of gas mixture. Our Gas chromatograph Laboratory has many GC's with different detectors like TCD, FID, DID, ECD and PFPD. We have different analyzers for NOX mixtures, Oxygen PPM and Percentage level analyzers, and Moisture meter.

Raw Materials are pre- analyzed to ensure that the final outcome of the gas mixture meets your specification for purity, accuracy and stability. Balance gases for mixtures are 99.999% (N5.0) or higher where appropriate.

We handle over 100 different types of gases and liquid chemicals to produce varieties of Gas / Liquid mixtures to serve the ever increasing need of Industries and Institutions.

Products

ARGON UHP 5.7

NITROGEN UHP 5.7

HYDROGEN 5.5

HYDROGEN 5.0

HYDROGEN UHP

0XYGEN -99.99%

HELIUM

HELIUM - 5.5 GRADE

HELIUM - 5.0 GRADE

UHP GRADE AIR

OXYGEN - 5.0

HELIUM - 4.5 GRADE

Carbon Dioxide+ Carbon Monoxide

Impurities

Purity

Oxygen

Moisture

Nitrogen

Purity

Oxygen

Moisture

Purity

Oxygen

Moisture

Nitrogen

Purity

Oxygen

Moisture

Nitrogen

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Moisture

Nitrogen

Carbon Monoxide

Carbon Dioxide

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Oxygen

Moisture

Nitrogen

Co2 + CO

Purity

Moisture

Purity

Argon +Nitrogen

Moisture

Co2 + CO

Purity

Oxygen

Moisture

Nitrogen

Carbon Monoxide + Co2

Purity / Concentration In PPM

CO + CO2

≥ 99.9997 %

≤ 0.1

≤ 0.5

≥ 99.9997 %

≤ 0.1

≤ 0.5

≥ 99.9995 %

≤ 0.2

≥ 99.999 %

≤ 0.2

≥ 99.995 %

≤ 0.5

≤ 40

≤ 0.5

≥ 99.99 %

≤ 95

≥ 99.9999 %

≤ 0.5

≤ 0.1

≤ 0.5

≤ 0.1

≤ 0.5

≥ 99.9995 %

≤ 0.5

≥ 99.999 %

≤ 0.5

≥ 99.999 %

≤ 0.1

≤ 0.5

≥ 99.995 %

≤ 8 ppm

≤ 2 ppm

≤ 0.2ppm

≤ 0.5 ppm

≥ 99.995 %

≤ 30

≤ 0.5

PRODUCT LIST

1,2-BUTADIENE-99.5%

1,3-BUTADIENE-99.5%

1-BUTANETHIOL -99.0%

1-BUTENE-99.0%

1-HEXENE - 99.7%

1-OCTENE -97%

1-PENTENE-99%2,2

DIMETHYL BUTANE-99%2,3

DIMETHYL BUTANE-98%

2-BUTANONE (ETHYL METHYL KETONE) -99.5%

2-BUTANETHIOL - 9.8%

2-METHYL-1-PROPANETHIOL -99%

2-METHYL-2-PROPANETHIOL -99.0%

2-METHYL 1 BUTENE-99.5%

2-METHYL 1 PENTENE-99.5%

2 METHYL PENTANE- 99%

2 PENTENE-99%

2-PROPANOL-99.7%

2-PROPANETHIOL -99.7%3-METHYL

1 BUTENE-99.5%3 METHYL

1-PENTENE-99%3

METHYL HEPTANE-97%3

METHYL HEXANE-99%3

METHYL PENTANE-99%

ACETALDEHYDE -99.5%

ACETONE -99.5%

ACETYLENE 96%

AMMONIA 99.98%

AMMONIA 99.999%

BENZENE-99.9%

CIS-2-BUTENE-99.0%

CIS-2-PENTENE -96%

CF4- 99.999%

METHANE-99.5%

METHANE-99.9%

METHANE-99.95%

METHANE-99.995%

METHANE-99.97%

METHANE-99.995%

CNG IN CASCADECARBON MONOXIDE 99.5%

CARBON MONOXIDE 99.9%

CARBON DIOXIDE 99.995%

CARBONYL SULPHIDE-99.0%

CYCLO HEXANE-99.5%

DEUTERIUM-99.6%

DI METHYL ETHER-99.2%

ETHYL BENZENE- 99%

ETHYL ACETATE-99.5%

ETHANE-99.5%

ETHYLENE OXIDE-99.5%

ETHYLENE-99.5%

ETHYLENE-99.9%

ETHYLENE-99.95%

ETHYLENE-99.995%

ETHANOL-99.9%

ETHANETHIOL - 9.7%

HYDROGEN 99.999%

HYDROGEN 99.9995%

HYDROGEN SULPHIDE-99.5%

HYDROGEN CHLORIDE-99.999%

HELIUM 99.995%

HELIUM 99.999%

HELIUM 99.9995%

HELIUM 99.9999%

HEPTANE-99.5%

HEXANE-99%

ISO BUTANE-99.5 %

ISO BUTANE-99.95

ISOBUTELENE-99.5%

ISOBUTELENE-99.9%

ISO PENTANE-99%

ISOPROPYL SULFIDE - 99%

KRYPTON 99.998%

KRYPTON 99.999%

METHYL CYCLO HEXANE-98%

METHYL CYCLO PENTANE-98%

METHYL ACETYLENE-99.9%

METHYL DISULPHIDE - 99%

METHYL MERCAPTAN- 99.5%

METHANOL-99.9%

NITROUS OXIDE 99.99%

N-BUTANE-99.5%

N-DECANE-99%

NEON -99.999%

NEO- PENTANE-99%

NITROGEN-DIOXIDE 99.5%

NITRIC OXIDE-99.5%

NONANE-99%

– PENTANE-99%

OXYGEN 99.999%

OCTANE-99%

PROPADIENE-99.6%

PROPELENE-99.5%

PROPELENE-99.95%

PROPYL MERCAPTAN (NMP)

PROPANE-99.5%

PROPANE-99.95%

PROPANE-99.99%

SULPHUR HEXAFLUORIDE- 99.9%

SULPHUR HEXAFLORIDE- 99.993%

SULPHUR DIOXIDE-99.98%

TRANS-2-BUTENE-99.0%

LTRANS-2-OCTENE -98%

TRANS-2-PENTENE -99%

TETRA BUTYL METHYL ETHER-99.5%

THIOPHENE - 99%

TOLUENE- 99.5%

XENON 99.999%

XYLENE -99%

ACCESSORIES

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec mattis porta mi sit amet placerat. Praesent justo purus, tristique at

Gas Pipe Installation and Gas Handling System

Pipe line projects and gas handling equipments for laboratory

Gas purification panels

Single stage brass regulators

Single stage SS regulators

Double stage brass regulators

Double stage SS regulators

Regulators

Single cylinder trolley

Double cylinder trolley

Trolleys

Gas Cylinders Carbon Steel Cylinders

Aluminum Cylinders

PRODUCT LIST

1,2-BUTADIENE-99.5%

1,3-BUTADIENE-99.5%

1-BUTANETHIOL -99.0%

1-BUTENE-99.0%

1-HEXENE - 99.7%

1-OCTENE -97%

1-PENTENE-99%2,2

DIMETHYL BUTANE-99%2,3

DIMETHYL BUTANE-98%

2-BUTANONE (ETHYL METHYL KETONE) -99.5%

2-BUTANETHIOL - 9.8%

2-METHYL-2-PROPANETHIOL -99.0%

2-METHYL 1 PENTENE-99.5%

2 METHYL PENTANE- 99%

2 PENTENE-99%

2-PROPANOL-99.7%

2-PROPANETHIOL -99.7%3-METHYL

1 BUTENE-99.5%3 METHYL

1-PENTENE-99%3

METHYL HEPTANE-97%3

METHYL HEXANE-99%3

METHYL PENTANE-99%

ACETALDEHYDE -99.5%

ACETONE -99.5%

ACETYLENE 96%

AMMONIA 99.98%

AMMONIA 99.999%

BENZENE-99.9%

CIS-2-BUTENE-99.0%

CIS-2-PENTENE -96%

CF4- 99.999%

METHANE-99.5%

METHANE-99.9%

METHANE-99.95%

METHANE-99.995%

METHANE-99.97%

METHANE-99.995%

CNG IN CASCADECARBON MONOXIDE 99.5%

CARBONYL SULPHIDE-99.0%

CYCLO HEXANE-99.5%

DEUTERIUM-99.6%

DI METHYL ETHER-99.2%

ETHYL BENZENE- 99%

ETHYL ACETATE-99.5%

ETHANE-99.5%

ETHYLENE OXIDE-99.5%

ETHYLENE-99.5%

ETHYLENE-99.9%

ETHYLENE-99.95%

ETHYLENE-99.995%

ETHANOL-99.9%

ETHANETHIOL - 9.7%

HYDROGEN 99.999%

HYDROGEN 99.9995%

HYDROGEN SULPHIDE-99.5%

HYDROGEN CHLORIDE-99.999%

HELIUM 99.995%

HELIUM 99.999%

HELIUM 99.9995%

HELIUM 99.9999%

HEPTANE-99.5%

HEXANE-99%

ISO BUTANE-99.5 %

ISO BUTANE-99.95

ISOBUTELENE-99.5%

ISOBUTELENE-99.9%

ISO PENTANE-99%

ISOPROPYL SULFIDE - 99%

KRYPTON 99.998%

KRYPTON 99.999%

METHYL CYCLO HEXANE-98%

METHYL CYCLO PENTANE-98%

METHYL ACETYLENE-99.9%

METHYL DISULPHIDE - 99%

METHYL MERCAPTAN- 99.5%

METHANOL-99.9%

NITROUS OXIDE 99.99%

N-BUTANE-99.5%

N-DECANE-99%

NEON -99.999%

NEO- PENTANE-99%

NITROGEN-DIOXIDE 99.5%

NITRIC OXIDE-99.5%

NONANE-99%

– PENTANE-99%

OXYGEN 99.999%

OCTANE-99%

PROPADIENE-99.6%

PROPELENE-99.5%

PROPELENE-99.95%

PROPYL MERCAPTAN (NMP)

PROPANE-99.5%

PROPANE-99.95%

PROPANE-99.99%

SULPHUR HEXAFLUORIDE- 99.9%

SULPHUR HEXAFLORIDE- 99.993%

SULPHUR DIOXIDE-99.98%

TRANS-2-BUTENE-99.0%

LTRANS-2-OCTENE -98%

TRANS-2-PENTENE -99%

TETRA BUTYL METHYL ETHER-99.5%

THIOPHENE - 99%

TOLUENE- 99.5%

XENON 99.999%

XYLENE -99%

ACCESSORIES

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec mattis porta mi sit amet placerat. Praesent justo purus, tristique at

Gas Pipe Installation and Gas Handling System

Pipe line projects and gas handling equipments for laboratory

Gas purification panels

Single stage brass regulators

Single stage SS regulators

Double stage brass regulators

Double stage SS regulators

Regulators

Single cylinder trolley

Double cylinder trolley

Trolleys

Gas Cylinders Carbon Steel Cylinders

Aluminum Cylinders

GAS CYLINDERS

The gas industry heavily depends on cylinders to store and transport gases. Because the cylinders are packed with gases under high pressure, they can be volatile. So they must be tough enough to withstand rough handling during transportation to prevent accidents. BHURUKA SUPPLIES high quality high-pressure gas cylinders ranging from 1 ltr water capacity to 80 liters water capacity– for oxygen, hydrogen, nitrogen, argon, helium, air etc Cylinders for the domestic market are produced as per IS-7285, certified by the Bureau of Indian Standards (ISI) and approved by the Chief Controller of Explosives, Government of India.

Carbon Steel Cylinders:

Aluminum Cylinders:

Aluminum cylinders are the best choice for specialty / Calibration gases (depends on compatibility) because it maintain the gas purity. The cylinders are light and consistent in weight, non-magnetic, corrosion free and are available in wide range of sizes and capacities. Special internal treatments are also done for precise needs. The cylinders perform well at low temperature.

Max, working pressure

at 15CTest Pressure

Water Capacity

(1 ltr)

Gas Capacity (Cu.m.)

Outside Dia ‘D’

150 kgf/cm2 250 kgf/cm2

Length ‘L’ Approx. (mm)

Tare weight Approx. (kg)

10.01 27KGS 57.5 IN23.5 IN10

at 15CTest Pressure

Water Capacity

(1 ltr)

Outside Dia ‘D’

Min. wall thickness

‘t’(mm)

150 kgf/cm2 250 kgf/cm2 1

You are turning to one company to do it all: from design, installation of pipe line for laboratory application, installation of specialty gas equipment, and testing of ultra high purity gas handling systems and nationwide field services along with the required specialized orbital welding. We've completed many ultra high purity gas handling systems in companies like VST MITUSBISHI, EXXON MOBILE, SIEMENS, TVS, VALVO etc. You connect with people who have a passion for precision welding of high pressure pipelines, our core competency (ORBITAL WELDING) of electroplated SS tubing

Use of the proper gas regulator for reducing pressure of gases contained in high-pressure gas cylinders is critical. Using the wrong gas regulator can result in compromising gas purity or accuracy, premature equipment failure, or even personal injury. BHURUKA helps to select the right gas regulator to the specialty gas you use. Simply specify the type of specialty gas you are using and BHURUKA will recommend the appropriate gas regulator(s) for your application.

GAS PIPE INSTALLATION AND GAS HANDLING SYSTEM

REGULATORS

Single Stage Brass Regulator

Single Stage SS Regulator

Double Stage Brass Regulator

Double Stage SS Regulator

GAS CYLINDERS

The gas industry heavily depends on cylinders to store and transport gases. Because the cylinders are packed with gases under high pressure, they can be volatile. So they must be tough enough to withstand rough handling during transportation to prevent accidents. BHURUKA SUPPLIES high quality high-pressure gas cylinders ranging from 1 ltr water capacity to 80 liters water capacity– for oxygen, hydrogen, nitrogen, argon, helium, air etc Cylinders for the domestic market are produced as per IS-7285, certified by the Bureau of Indian Standards (ISI) and approved by the Chief Controller of Explosives, Government of India.

Carbon Steel Cylinders:

Aluminum Cylinders:

Aluminum cylinders are the best choice for specialty / Calibration gases (depends on compatibility) because it maintain the gas purity. The cylinders are light and consistent in weight, non-magnetic, corrosion free and are available in wide range of sizes and capacities. Special internal treatments are also done for precise needs. The cylinders perform well at low temperature.

at 15CTest Pressure

Water Capacity

(1 ltr)

Outside Dia ‘D’

150 kgf/cm2 250 kgf/cm2

10.01 27KGS 57.5 IN23.5 IN10

at 15CTest Pressure

Water Capacity

(1 ltr)

Outside Dia ‘D’

Min. wall thickness

‘t’(mm)

150 kgf/cm2 250 kgf/cm2 1

You are turning to one company to do it all: from design, installation of pipe line for laboratory application, installation of specialty gas equipment, and testing of ultra high purity gas handling systems and nationwide field services along with the required specialized orbital welding. We've completed many ultra high purity gas handling systems in companies like VST MITUSBISHI, EXXON MOBILE, SIEMENS, TVS, VALVO etc. You connect with people who have a passion for precision welding of high pressure pipelines, our core competency (ORBITAL WELDING) of electroplated SS tubing

Use of the proper gas regulator for reducing pressure of gases contained in high-pressure gas cylinders is critical. Using the wrong gas regulator can result in compromising gas purity or accuracy, premature equipment failure, or even personal injury. BHURUKA helps to select the right gas regulator to the specialty gas you use. Simply specify the type of specialty gas you are using and BHURUKA will recommend the appropriate gas regulator(s) for your application.

GAS PIPE INSTALLATION AND GAS HANDLING SYSTEM

REGULATORS

Single Stage Brass Regulator

Single Stage SS Regulator

Double Stage Brass Regulator

Double Stage SS Regulator

The gases used in the GC have to be pure and free from Oxygen, Hydrocarbons and moisture as they are harmful to GC. The hydrocarbons present may give baseline noise and irreproducible results. Moisture and oxygen can strip phase, cause excessive bleed thus damaging the GC column or shorten its span. Bhuruka supplies high quality purification panels.

GAS PURIFICATION PANELS

Gas manifolds and gas delivery systems are a cost-effective and safe method to provide uninterrupted specialty gas supply to your application, and also eliminate gas outages and premature cylinder change out

PIPELINE PROJECTS AND GAS HANDLING EQUIPMENT FOR LABORATORY

TROLLEYS

We are offering Double Cylinder Trolleys for the cumbersome big cylinders as well as small cylinders. These trolleys are scratch resistant, have a high gloss and electrostatically applied oven baked powder coating. Double Cylinder Trolleys offered by us are manufactured to hold and easily transport heavy compressed gas cylinders and they have arc welded tubular steel construction for strength.

Single Cylinder Trolley Double Cylinder trolley

COMPLIANCE

The gases used in the GC have to be pure and free from Oxygen, Hydrocarbons and moisture as they are harmful to GC. The hydrocarbons present may give baseline noise and irreproducible results. Moisture and oxygen can strip phase, cause excessive bleed thus damaging the GC column or shorten its span. Bhuruka supplies high quality purification panels.

GAS PURIFICATION PANELS

Gas manifolds and gas delivery systems are a cost-effective and safe method to provide uninterrupted specialty gas supply to your application, and also eliminate gas outages and premature cylinder change out

PIPELINE PROJECTS AND GAS HANDLING EQUIPMENT FOR LABORATORY

TROLLEYS

We are offering Double Cylinder Trolleys for the cumbersome big cylinders as well as small cylinders. These trolleys are scratch resistant, have a high gloss and electrostatically applied oven baked powder coating. Double Cylinder Trolleys offered by us are manufactured to hold and easily transport heavy compressed gas cylinders and they have arc welded tubular steel construction for strength.

Single Cylinder Trolley Double Cylinder trolley

COMPLIANCE

BHURUKA GASESBhuruka Gases Limited is a world class facility, reputed as a manufacturer, importer and exporter of specialty, rare gas, industrial and liquid gas products. Operating in a SAP-R3 environment Bhuruka Gases was established in 1974 in Bangalore and has since been in Operation since as a independent, successful, dependable and quality conscious manufacturer

A UNIQUE RANGE THAT INCLUDE SPECIALTY, RARE GAS, INDUSTRIAL & LIQUID GAS PRODUCTS

General Manager (Operations)+91-80-41818217 +91- 80- 9886026079 [email protected]

For unsolved problems

General Manager (Marketing)+91- 80- 41818216 +91- 80- [email protected]

For bulk liquids

+91-80-41818245+91- 80- 9972744558/ 9611895926 [email protected]

For High Pure Hydrogen, Nitrogen, Mixture Gases

+91-80-41818213+91- 80- 9845640065/ [email protected]@bhurukagases.com

For Logistics

+91-80-41818220+91- 80- [email protected]

For Specialist & Calibration Gases

+91-80-41158736+91- [email protected]

For Technical Enquiry for Specialty & Calibration Gases

+91-80-41818237,41818218+91- 80- [email protected]@bhurukagases.com

For Pipline Projects & Gas Handling Systems

Bhuruka Gases LtdWhitefield Road, Mahadevapura PostBangalore 560048, Karnataka, IndiaPhone: +91 - 80 - 41818200 (50 Lines) Fax: +91 - 80 - 41148753/28524243 Email: [email protected] Website: www.bhurukagases.com

Chennai:Chennai Bottling Unit No 6th, North Terminus RoadTollgate, Chennai 600101Tamil Nadu, INDIAPhone: 044-25912172/ 25917006Mobile: +91 9941334023Email: [email protected]

Delhi: C/O IIHMR Building, 2 nd Floor, Plot No. 3 SAF Pocket, Sector 18A, Phase-IINear Veer Awas/ Kargil Apprt, DwarakaNew Delhi 110075, INDIAPhone: +91- 09350114842 Fax: +91 1130418906Email: [email protected]

RIGHT PRODUCT, EVERY TIME, ON [email protected]

Customer Complaints

Bhoruka Gases -Consolidated julybhurukagases.com/wp-content/.../2014/09/Bhoruka-Gases-BROCURE...

Documents

Transcript of Bhoruka Gases -Consolidated julybhurukagases.com/wp-content/.../2014/09/Bhoruka-Gases-BROCURE...