Better Design Makes a Difference - Wilger Brochures/cjnb... · Better Design Makes a Difference....
3
Revised 2017 COMBO-JET® Nozzle Body Brochure Wilger Nozzle Bodies let you configure your sprayer to make it work better for you. Better Design Makes a Difference
Transcript of Better Design Makes a Difference - Wilger Brochures/cjnb... · Better Design Makes a Difference....
Revised 2017
COMBO-JET® Nozzle Body Brochure
Wilger Nozzle Bodies let you configure your sprayer to make it
work better for you.
Better Design Makes a Difference
Wet Boom Nozzle Bodies
Manual On/Off Module
While “ON”, operates as a check valve.While “OFF”, turns off flow to spray tip.
Available in 4, 10, 15 PSI varieties.Available in Viton® seals.
Interchangeable Nozzle Body Control Modules
COMBO-JET® & Square Lug Swivel Bodies
Bare Thread*
Thread is compatible with PWM system solenoids (e.g. Case iH AIM
Command®, Raven Hawkeye®, Capstan Sharpshooter®), as well as other
variable rate control systems.
*A nozzle body does require a body nut and module.The bare thread options is available for replacement parts, or for third party modules.
40517-00
KWIKSTOP™ nozzle bodies have a taller inlet stem that removes built up air in the boom pipe, so nozzles shut off faster and there is less
run-on caused by trapped air
Radialock* Swivel Bodies
40196-00
Square Lug Swivel Bodies
Nozzle Body Specifications:Maximum Operating Pressure: 125 PSI (9 Bar)4PSI /10PSI (standard)/15 PSI Check Valves availableEPDM (standard) & Viton® seals available
Nozzle Body materials: Main Body & Hinge Clamp (Glass Filled Polypropylene)Lower Swivel Body (Delrin®)Metal Components: Stainless Steel
Male thread allows for any Wilger control modules to be used.Hinged clamp allows for easier installationCompact and durable for low costTo order with different control modules, consult Wilger pricelist.
*Radialock swivel bodies fit Combo-Jet® Tip Caps directly, and seal tighter than square lug nozzle bodies
Wet Boom Nozzle Bodies Designed for Tough ConditionsWilger manufactures swivel-turret nozzle bodies for a durable and cost effective way to equip today’s sprayers
The COMBO-JET® Advantage
Stainless Hi-Lo screw for seamless installation
Swivel available with Radialock (Combo-Jet) or
Square Lug (Teejet/Hypro/etc.) Outlets
Compact swivel body sits directly under the boom
Swivel Turrets available with up to 3 nozzle outlets
Module can be switched for other shut-off options
(diaphragm check valve option shown)
Debris-cleaning inlet slots for less residue buildup
KWIKSTOP™ raised inlet option to reduce spray run-on
UNITED STATESWilger Inc.255 Seahorse Drive Lexington, TN, USA 38351-6538Phone:(877)968-7695 / (731)968-7695Fax: (877)968-7613 / (731)968-7613E-Mail: [email protected]
CANADAWilger Industries Ltd.Group Box 280 RR#471st. St. Rd. & Highway 16WSaskatoon, SK, Canada S7K 3J7Phone: (306)242-4121 Fax: (306)242-4122E-Mail: [email protected]
ARGENTINAWilger ArgentinaMitre 697, San Nicolas (2900)Buenos Aires, Argentina Phone: +54 9 336 4596710 Email: [email protected]
COMBO-JET ®
Fertilizer Streamer Tips
COMBO-JET ®
Nozzle Bodies FLOW VIEW
™ Ball Flow Indicators
COMBO-RATE ®
Modular Nozzle Bodies
Wilger Boom End Flush Valve
Quick-Nut SST Fluid Supply
System
COMBO-JET ® Nozzle Bodies40511-00 40517-00 40527-00 1. Diaphragm and Seal Options
BUNA-N (standard, unless otherwise noted)Viton (replace -00 suffix with -V0)
COMBO-JET® Wet Boom Nozzle Bodies
Diaphragm Check Valve Module
Available in 5/10/15 PSI options
Manual ON/OFF Module When ‘ON’, acts as check valve;
when ‘OFF’, flow is stopped
AIR-OFF Module Air pressure turns off flow;
Without air, acts as 10PSI check
Bare Thread Thread can be used with
variable rate and PWM systems
Additional Options
2. Nozzle Shut-Off PressureCOMBO-JET® nozzle bodies allow for differently weighted diaphragm check valves which turn off the body at differ-ent pressures. These varieties are ordered by changing the
part number suffix.4 PSI Shut-Off (Replace -00 with -P4; e.g. 40510-P4)
10 PSI Shut-Off (Standard; e.g. 40510-00)15 PSI Shut-Off (Replace -00 with -P15; e.g. 40510-P15)
3. Shut-Off or Control ModulesCOMBO-JET® wet boom nozzle bodies have a threaded body nut which makes them compatible with a host of
different modules and configurations for different types of applications. For part numbers, consult Wilger price list.
Note that dry boom nozzle bodies and specialty bodes may be compatible with only diaphragm check valve modules.
Wet Boom Nozzle Bodies (compatible with all modules)
Printed In Canada
VISIT
For more information
OUTLETS 3/4" WB 1" WBSINGLE 40510-00 40511-00DUAL 40516-00 40517-00
TRIPLE 40526-00 40527-00
40259-00 40258-00 40268-00
KWIKSTOP nozzle bodies have a taller inlet stem that
passively removes built up air in the boom pipe, so nozzles
shut-off faster and there is less run-on caused by trapped air
KWIKSTOP™ Wet Boom Nozzle BodiesRadialock KWIKSTOP™ Nozzle Bodies (only compatible with diaphragm check valve modules)
OUTLETS 1" WB KWIKSTOP
SINGLE 40259-00DUAL 40258-00
TRIPLE 40268-00
KWIKSTOP PERK: Nozzle Body passively purges air from boom
40194-00 40196-00 40198-00
Square Lug Wet Boom Nozzle BodiesWet Boom Nozzle Bodies with Square Lug Outlets
OUTLETS 3/4" WB 1" WB 1" WB KWIKSTOP
SINGLE 40193-00 40194-00 40116-00DUAL 40195-00 40196-00 40117-00
TRIPLE 40197-00 40198-00 40118-00
Combo-Jet® Turret Adapters
40470-00 40471-00 40473-0040472-00
Adapts a Combo-Jet outlet to 2 or 3 Combo-Jet outlets
COMBO-JET® OutletsAdapts a Combo-Jet outlet to 2 or 3 Square Lug outlets
Square Lug Outlets
COMBO-JET® ADAPTER (RADIALOCK to COMBO-JET® Cap)
SQUARE LUG ADAPTER (RADIALOCK to SQUARE LUG Cap)
40470-00 ....DUAL BODY ADAPTER - COMBO-JET® OUTLETS40471-00 ....TRIPLE BODY ADAPTER - COMBO-JET® OUTLETS
40472-00 ....DUAL BODY ADAPTER - SQUARE LUG OUTLETS40473-00 ....TRIPLE BODY ADAPTER - SQUARE LUG OUTLETS
Combo-Jet® Turret Adapters are an easy way to increase the number of tips mounted to a nozzle body
