BETA Action euro exp 2013
-
Upload
soluciones-mecanicas -
Category
Documents
-
view
227 -
download
0
description
Transcript of BETA Action euro exp 2013
valid until29/11/2013
Promotion2013
2
since 1939
• 200 IMPORTERS AND DISTRIBUTORS
WORLDWIDE• 7 BRANCHES
Brazil China FranceHollandPolandSpain
The United Kingdom
Development
Information
InnovationTradition
Service
• 3 PRODUCTION SITES
PARTNERSHIP 2012
3
ContainersAssortmentsHard thermoformed trays, T-seriesWrenchesMale-end wrenches and bitsSocketsTorque wrenches and multipliersScrewdriversPliersHammersPlumbing toolsCutting toolsTools for electrotechnical maintenanceDrilling and threading toolsMeasuring toolsPullersGeneral maintenance tools
Vehicle repair toolsDiagnosticsBatteryEngineBrakesJacking
Pneumatic tools WorkwearSafety footwear
4÷1011
12÷1516-17
18÷2021
22-2324-25
26272829
30-313233
33-3435÷38
39-4041
42÷4647÷49
50
51÷53
54÷5758÷63
INDEX
RANGEOver 10,000
coded items
PARTNERSHIP 2012Beta Utensili has been
winning for over forty years. Unique
partnerships with the best professionals who are
committed to achieving impressive results.
4
C39/7
C39/6
C39/8
C39T
039000001
039000002 039000003
039000031
039000032039000033
039000041
039000042039000043
039000101
039000102039000103
971
mm
500 mm
800 mm
59 kg
55 kg
62 kg
25 kg
971
mm
500 m
800 mm
971
mm
500 m
800 mm
340
mm
500 mm
800 mm
1200
kg
++
+
Alluminium alloystructure:
+RESISTANCE+LIGHT
Mobile roller cab with 6 drawers4 drawers, 70 mm high 1 drawer, 140 mm high 1 drawer, 280 mm high
Mobile roller cab with 8 drawers6 drawers, 70 mm high 2 drawers, 140 mm high
Portable tool chest with 4 drawers588x367 mm with ball bearing slides: 70 mm high• Load capacity of one drawer: 15 kg• Uprights and drawer front made of aluminium
Roller cab with 7 drawers • Seven drawers (588x367 mm) with ball bearing slides: 5 drawers, 70 mm high 1 drawer, 140 mm high 1 drawer, 210 mm high. • Drawer bases protected by foamed rubber mats. • Front centralized safety lock. • Thermoplastic worktop.• Four castors 125 mm in Ø: 2 fixed and 2 steering (1 with brake).
Quick opening
system made of aluminium
• Integrated paper roll
holder
5 integrated bottle holders
Castors with steel cores
Containers
5
800kg
C24S/7 024002071
024002072024002073
58 kg
944
mm
445 mm
740 mm
C24S/8
C24S/6
C24S/8 024002081
024002082024002083
024002061 024002062024002063
61 kg
55 kg
944
mm
445 mm
740 mm
944
mm
445 mm
740 mm
454 m
m
445 mm
740 mm
28,5 kg
C23ST
023000521
023000522023000523
+
+
+
Mobile roller cab with 7 drawers(588x367 mm) with ball bearing slides:5 drawers, 70 mm high1 drawer, 140 mm high1 drawer, 210 mm high• High-resistance ABS worktop• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake).• Integrated side bottle holder.• Front centralized safety lock.
Mobile roller cab with 8 drawers6 drawers, 70 mm high 2 drawers, 140 mm high
Mobile roller cab with 6 drawers4 drawers, 70 mm high 1 drawer, 140 mm high 1 drawer, 290 mm high
Castors with steel cores
Portable tool chest with 5 drawers588x367 mm with ball bearing slides: 5 drawers, 70 mm high• Load capacity of one drawer: 15 kg• Front centralized safety lock
Optional 4-wheelkit handlebar(2300ST/KIT)
High-resistance nylon front
6
C22SC24SL
024002101
024002102024002103
19 kg 63 kg
973
mm
565 mm
1050 mm
334 m
m
330 mm
700 mm
022000501
022000502022000503
+
+
800kg
Portable tool chest with 3 drawers• Three drawers (588x277 mm) with ball bearing slides: 1 drawer, 50 mm high 2 drawers, 70 mm high.• Front centralized safety lock.• Retractable side handles for ease of handling.
Mobile roller cab with 7 drawers and side tops• 7 drawers (588x367 mm) with ball bearing slides: 5 drawers, 70 mm high 1 drawer, 140 mm high 1 drawer, 210 mm high.• Multi-ply wood worktop with holes for a vice (1599/F100, to be ordered separately).• Side compartment with vertically adjustable top.• 3 bottle holders and 1 paper roll holder, integrated • 4 castors, Ø 125 mm: 2 fixed and 2 steering (two with brakes)
Castors with steel cores
High-resistance nylon front
* soft thermoformed trays, MC series,
optional
* the full range is available on www.beta-tools.com
7
C28
028000301
028000302028000303
C38A
038000301
038000302038000303
130 kg
101 kg
1200
kg
950 m
m
800 mm
1200 mm
1007
mm
458 mm
1067 mm
1200
kg
+
+
* the full range is available on www.beta-tools.com
SuperTank trolley with worktop and 10 drawers• Ten drawers (588x367 mm) with ball bearing slides. • Quick, safe system for opening and closing drawers, with nylon and fibreglass front. • Five side drawers: 4 drawers, 70 mm high 1 drawer, 210 mm high • Five front drawers: 4 drawers, 70 mm high 1 drawer, 210 mm high • Drawer bases protected by foamed rubber mats. • Four high-capacity castors 150 mm in Ø: 2 fixed and 2 steering (with brakes). • 2 centralised safety locks. • Multiply wood worktop with holes for a vice (1599F/150, to be ordered separately) • Side compartment with foldaway door with lock. • 135-mm-high storage compartment with plastic-covered base.
Mobile roller cab with 6 drawers and tool cabinet• 6 drawers with ball bearing slides: 1 drawer, 937x410x122 mm 3 drawers, 570x410x74 mm 2 drawers, 570x410x153 mm.• 4 high-capacity castors, Ø 125 mm: 2 fixed and 2 steering (both with lever brake).• Sheet metal worktop covered by a rubber mat.
• Vertically adjustable interior shelf.• Inside door
document pocket
available with assortment 5938A/13
(pag. 11)
8
900 m
m
450 mm
800 mmC51 051000001
051000002 051000003
C41H
C41S
041000002
041000001
CP52 052000501
052000502 052000503
21 kg
29 kg
21 kg
920 m
m335
mm
536 mm
871 m
m
335 mm
536 mm
16 kg
920
mm
600 mm
1000 mm
Sturdy trolleyHigh-resistance trolley• Welded sheet metal frame • Reinforced top • Static load capacity: 750 kg• 4 castors, Ø 125 mm: 2 fixed and 2 steering (one with brake)
Two-module tool trolley• Sheet metal frame and plastic tops, synonymous with remarkable sturdiness and reduced weight. • Side centralized lock for closing drawers of lower module. • Drawers with ball bearing slides and double closing hook. • Telescopic aluminium handle. • Small tool holder built into upper tool box. • Lower drawer with double ballbearing slide• 2 detachable modules: 1 upper tool box, 1 module with 2 drawers 95 mm in height, 1 pull-out case made of plastic, 66 mm high, and 1 drawer 295 mm in height
NEW ITEM
Trolley• 3 tops covered in antislip ribbed rubber• Static load capacity: 200 kg (shared between 3 shelves)• Two fixing options for central worktop• 4 castors, Ø 100 mm: 2 fixed and 2 steering (one with brake)
• 2 detachable modules: 1 upper tool box,
1 module with 2 drawers, 95 mm and 295 mm high respectively.
9
C56 056000201
056000202056000203
C20L
C22B O
021200002
022000150
5,4 kg
13 kg
84 kg900 m
m
640 mm
2000 mm
1200
kg
C22BM O 022000160 20 kg
850x360x350 mm
C22BL O 022000170 26 kg
1010x410x400 mm
720x320x310 mm 550x200x210 mm
C16 021160000
2,5 kg
CP17
CP17L
021170500
021170502
500x200x220 mm
575x245x265 mm
2,5 kg
3,7 kg
500x260x260 mm
Workbench• Worktop made of painted sheet metal with external edge
• Steel frame with 6 supporting legs • Matches panel toolholder C57P; cannot be fixed to worktop
• Two drawers with lock • Can be fixed to floor
Five-section cantilever tool box, made from sheet metal
Tool trunk, made of sheet metal
l ongModel
Tool box, made of stainless steel and plastic, removable tote-tray
Tool box, made of plastic, with interior object compartment, empty• Double steel closure • Aluminium folding handle running throughout length of cover • Carrying capacity: 30 kg
NEW
ITEM
10
C5 021050000 C11 021110000
2,5 kg 2 kg 500x400x180 mm 400x240x220 mm
C10 021100000
C10S 021100001C6T 021060010
4,5 kg
480x370x220 mm
520x220x250 mm
420x220x250 mm 2,3 kg
3,3 kg
520 mm
420 mm
+
Tool rucksack, made of technical fabric, empty• Removable interior tool panel• Six functional exterior pockets• Two capacious interior pockets • Waterproof plastic base• Double safety lace for fixing rucksack to shoulders• Ergonomic padded back
Tool rucksack, made of technical fabric, with castors, empty• Telescopic handle for easy transport • Built-in castors with dustproof cover for use as rucksack • Two removable tool panels • Five functional exterior pockets • One capacious interior PC pocket • Waterproof base
Tool box, made of fabric, empty• Hard water resistant plastic base • Elastic bands and interior and exterior tool pockets • Document holders built into double bottom of cover
Tool box, made of fabric, with tool tray, empty
NEW ITEM
Assortment of 108 tools in thermofor-
med trays
Assortment of 107 tools in thermofor-
med trays
11
5988VU/MP 059880408 Tg. L
5938A/13 059380310 Tg. L 059380311 Tg. XL
5988VI/T 059880420 Tg. L 059880421 Tg. XL
5988VU/T 059880489 Tg. L 059880490 Tg. XL
059880409 Tg. XL588 mm
367
mm
5988VA/T 059880410 Tg. L 059880411 Tg. XL
570 mm
T212
T210
T52
T145
T153
T131
VP-3SCVP-LSVP-3SCVP-LS VP-3SCVP-LS VP-3SCVP-LS
T33
T16
T15
410
mm
T80
T234
T80
T153
T145
T234
T33
T131
T52
T199
T10
T202
588 mm
367
mm
T199
T80
T202
T153
T234
T145
T131
T33
T16
T52
T15
T236
VP4
T289
VP4
T199
T80
T202
T153
T145
T33
T52
T15
VP5
T131
T16
588 mm
367
mm
T234
T63
M131
M16
M15
M153
M82
M236
M145
M234
M170
M172
+ 96/SC9
588 mm
367
mm
+
+
+
+
Tool box, made of fabric, empty• Hard water resistant plastic base • Elastic bands and interior and exterior tool pockets • Document holders built into double bottom of cover
Assortment of 99 tools in thermoformed trays, for roller cab C38A only
Assortment of 108 tools in thermofor-
med trays
Assortment of 90 tools in
thermoformed trays
Assortment of 95 tools in thermoformed trays
Assortment of 107 tools in thermofor-
med trays
Assortments
12
024500015
42 6-7-8-9-10-11-12-13-14 15-16-17-18-19-20-21 mm
M40 024500040
90 6x7-8x9-10x11-12x13 14x15-16x17-18x19 mm
M45 024500045
142 8-9-10-11-12-13-14 15-16-17-18-19 mm
M46 024500046
142SN 8-9-10-11-12-13-14 15-16-17-18-19 mm
M69 024500069
951 2,5-3-4-5-6-8-10-12-14 mm
M50 024500050
96T 2-2,5-3-4-5-6-7-8 mm
M63
952 7-8-10-12-13-14 17-19 mm
024500063
M33 024500033
55 6x7 - 8x9 10x11 - 12x13 14x15 - 16x17 18x19 - 20x22 mm 96/SC9 1,5÷10mm
M16 024500016
42 22-24-27 30-32 mm
M15
• Safety: unparalleled protection from impact and friction• Ease of recognition: orange bottom for immediate location of missing tools• Tidiness and rationalisation: optimally arranged tools• Durability: system interchangeable with hard T-series thermoformed trays• Modularity: system interchangeable with hard T-series thermoformed trays* the full range is available on www.beta-tools.com
Hard thermoformed trays, T-series
13
M131 024500131
1084BM 160 mm1150BM 180 mm1166BM 160 mm
M145 024500145
1032 180 mm 1034 170 mm
1036 175 mm 1038 175 mm
M153 024500153
1048 250 mm1052 240 mm
M170 024500170
1290 2,5x50 - 3x75 - 3,5x100 4x125 - 5,5x100 5,5x150 - 6,5x150 mm
M172 024500172
1292 PH0x60 - PH0x100 PH1x80 - PH1x120 PH2x100 - PH2x150 mm
M234 024500234
35 100-200 mm1370 300 g1390 ø 35 mm
900 4-4,5-5-5,5-6-7-8-9 10-11-12-13-14 mm 900ME 2,5-3-4-5-6-8 mm 900/20 50 mm 900/21 150 mm 900/25 1/4 1/4 900BG/30 900/42 900/55
M91 024500091
910A 6-7-8-9-10-11-12 13-14-15-16-17-18 19-20-21-22 mm910/21 125 mm 3/8 - 3/8 910/22 250 mm 3/8 - 3/8 910/25 3/8 - 3/8 910/42 3/8 910/55 3/8
M92 024500092
M236 024500236
1719BMA/Q 200 mm 1719BMA/T 200 mm 1719BMA/P 200 mm 1719BMA/M 200 mm 1719BMA/R 200 mm
M82 024500082
920A 10-11-12-13-14-15-16 17-18-19-20-21-22-23 24-26-27-30-32 mm920/ME 5-6-8-10-12 mm920AN/125 125 mm 1/2 - 1/2 920/22 255 mm 1/2 - 1/2920/25 1/2 - 1/2 920/42 1/2 920/55 1/2
M300 M310 024500300 024500310
1927CD 720 12-13-14-15-16 17-18-19-21 22-24-27 mm 720/21
1927A 720 12-13-14-15-16 17-18-19-21 22-24-27 mm 720/21
NEW ITEM NEW ITEM
14
T15 024240015
42 6-7-8-9-10-11-12 13-14-15-16-17 18-19-20-21 mm
024240016
42 22-24-27-30-32 mm
T16 T31 024240031
31 Ø 2-3-4-5-6 mm32 Ø 4 mm55 6x7-8x9-10x11-12x13 14x15-16x17-18x19 20x22-21x23-24x26 27x29-30x32 mm 96N/SC9 1,5÷10 mm
024240045T45
142 8-9-10-11-12-13-14 15-16-17-18-19 mm
T46 024240046
142SN 8-9-10-11-12-13-14 15-16-17-18-19 mm
T50 024240050
96T 2-2,5-3-3,5-4-4,5 5-6-7-8-10 mm
024240055T55
97TTX T10-T15-T20 T25-T27-T30
T63 024240063
952 7-8-10-12-13-14-17-19 mm
T91 024240091
900 4-4,5-5-5,5-6-7-8-9 10-11-12-13-14 mm 900ME 2,5-3-4-5-6-8 mm 900/20 50 mm 1/4 - 1/4 900/21 150 mm 1/4 - 1/4 900/25 1/4 - 1/4 900/30 1/4 900/42 1/4 900/55 1/4
T82 024240082
920A 10-11-12-13-14 15-16-17-18-19 20-21-22-23-24 26-27-30-32 mm 920/ME 5-6-8-10-12 mm 920AN/125 125 mm 1/2 - 1/2
920AN/250 250 mm 1/2 - 1/2 920/25 1/2 - 1/2 920/42 1/2 920/55 1/2
024240085T85
861LP 0,5x3-0,6x4,5-0,8x5,5-1x5,5-1,2x6,5 1,2x8-1,6x8 mm 861PE 2-2,5-3-4-5-6-8-10 mm 861PH PH0- PH1 - PH2 - PH3 861PZ PZ1 - PZ2 - PZ3 861TX T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40 861RTX T9-T10-T15-T20-T25-T27-T30-T40 861TRW 1-2-3-4-5-6 mm 861TQS 0-1-2-3-4-5-6-8 mm 861SP 4-6-8-10-12 mm851SR 230 mm 900 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm900/21 150 mm 900/25 41 mm900BG/30 176 mm 900/42 115 mm 900/55 125 mm 194 1/4x5/16
NEW ITEM
15
T92 024240092
910A 6-7-8-9-10-11-12 13-14-15-16-17-18 19-20-21-22 mm910/21 125 mm 3/8 - 3/8 910/22 250 mm 3/8 - 3/8 910/25 3/8 - 3/8910/42 3/8910/55 3/8
T103 024240103
900L 6-7-8-9-10-11-12 mm 920AL 13-14-16-17-18-19 21-22-24-27 mm
T112 024240112
861TX T6÷T15 866TX T20÷T55 895/1 1/4x 1/4 895/6 5/16x 1/2 900FTX E4÷E10 920FTX E12÷E24 920TX T55L-T60-T70L
T131 024240131
1084BM 160 mm1150BM 180 mm1166BM 160 mm
T132 024240132
1084 160 mm1150 180 mm1166 160 mm
T145 024240145
1032 180 mm 1034 170 mm 1036 175 mm 1038 175 mm
T153 024240153
1048 250 mm1052 240 mm
1260 2,5x50-3x75-3,5x100 4x125-5,5x100 5,5x150-6,5x150 mm
T199 024240199 T202 024240202
1262 PH0x60-PH0x100PH1x80-PH1x120-PH2x100 PH2x150 mm
024240205T205
1267TX T6-T7-T8-T9 T10-T15-T20
T227 024240227
944BX 5-6-7-8-10-13 mm
T234 024240234
35 100-200 mm1370 300 g1390 ø 35 mm
T236 024240236
1719BMA/Q 200 mm 1719BMA/T 200 mm 1719BMA/P 200 mm 1719BMA/M 200 mm 1719BMA/R 200 mm
920A 10-11-12-13-14 15-16-17-18-19 20-21-22-23-24 26-27-30-32 mm 920/ME 5-6-8-10-12 mm 920AN/125 125 mm 1/2 - 1/2
920AN/250 250 mm 1/2 - 1/2 920/25 1/2 - 1/2 920/42 1/2 920/55 1/2
NEW ITEM
16
8-10-11-12-13-14-15-17-19 mm
8-10-11-12-13-14-15-17-19 mm
6-7-8-9-10-11-12-13-14-15 16-17-19-22-24 mm
42/SC9I 000420087
142/SC9I 001420087
42/SP15 000420078
8x10-12x13-14x15-16x18-17x19 mm
195P/B5 001950266
8-9-10-11-12-13-14-15 16-17-18-19 mm
142C/A12 001420175
123/K4 001230504
123Q1/4123Q3/8
123Q1/2
123E1/4
192/S2 001920070
13 mm 10 mm
12 mm 8 mm19 mm 17 mm
18 mm 16 mm
Set of 9 combinationwrenches, open and offset ring ends, with compact support
Set of 9 reversible ratchetingcombination wrenches,with compact support
Set of 15 combination wrenches with holder
Set of 5 reversible ratcheting double-ended angle head wrenches in wallet
Set of 12 ratcheting combination wrenches, straight short series in case
Kit with 4 adapters for ratchet wrenches: 1 bit adapter 3 quick release adapters
8 SIZES IN 2 WRENCHES
Set of 2 reversible ratcheting offset bi-hex ring wrenches
Wrenches
17
111G/200 001110620
944BX/D6 009440056 952/D7 009520079
111G/250 001110625 111G/300 001110630
5-6-7-8-10-13 mm 7-8-10-12-13-14-17 mm
90°
45°
L A max200 mm 28 mm
L A max250 mm 32 mm
L A max300 mm 36 mm
A
55/SP7 000550167
6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm
90/S7 000900163
6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm
Adjustable wrenches with scales chrome-plated, bimaterial handles• Movable jaw opening with right-hand rotation of pin • Ergonomic handle • Mm and inch scale
mm/inch readout
Ergonomic handle
Set of 7 double open end wrenches with holder
Set of 7 double ended deep offset ring wrenches
NEW ITEM
Set of 6 hi-torque hexagon nut spinners with bi-material handles
Set of 7 T-handle wrenches with swivelling hexagon sockets
18
96/SC12 000960395
2-2,5-3-3,5-4-4,5 5-6-7-8-9-10 mm
96/BGS7 000960367
1,5-2-2,5-3-4-5-6 mm
96BPC/SC9 000960354
1,5-2-2,5-3-4-5-6-8-10 mm
96BPA/SC9 000961974
1,5-2-2,5-3-4-5-6-8-10 mm
1,5-2-2,5-3-4-5-6-8-10 mm
+30%
96LBP/SC9 000961354
T9-T10-T15-T20-T25-T27-T30-T40
97BTX/SC8 000970164
Set of 12 offset hexagon key wrenches
Set of 9 ball head offset hexagon key wrenches
Set of 9 ball head offset hexagon key wrenches, 110°, extra-short side model
110° angle
extra-short side
Set of 7 offset hexagon key wrenches
Set of 9 ball head offset hexagon key wrenches, extra-long model
extra-long Model
Set of 8 ball head offset key wrenches, for Torx® head screws
Male-end wrenchesand bits
19
2,5-3-4-5-6 mm
855P 008550010
860PH PH1 – PH2860PZ PZ1 – PZ2 860LP 0,8x5,5 mm860PE 4 – 5 mm
951/S6 009510687
2,5-3-4-5-6-8 mm
97TTX/S6 000970795
T10-T15-T20-T25-T30-T40
96T/S5P 000960946
60°
Set of 5 offset hexagon key wrenches with handles
Reversible ratchet bit holder with
articulated handle
Set of 6 T-handle wrenches with three hexagon male ends
Set of 6 offset key wrenches, for Torx® head screws with handles
Quick releasebit holder
7 built-in bits
NEW ITEM
20
860/S3 008600875
925/S2 009250755
892/0
860/55
862F/A7 008620950
860MIX/A10 008600900
0,5x3 - 1,0x5,5 - 1,2x6,5 mm PH1 - PH2 (x2) - PH3 PZ1 - PZ2 - PZ3 1/4” - 1/4”
860LP 860PH
882M1 860PZ
882P/80
T7-T8-T9-T10-T15T20-T25-T27-T30-T40 1/4” - 1/4”
860TX
882M1
860TX/A10 008600970
860/C27 008600880
860PE 2-2,5-3-4-5-6-mm
860PZ PZ1 - PZ2(2x) - PZ3
860LP 0,5x3-1,0x5,5-1,2x6,5 mm
860TX T6-T8-T10-T15-T20-T25-T30-T40 860PH PH1-PH2(x2)-PH3
860/55892/0
862F 5,5-6-7-8-10-12-13 mm
1260 2,5x50-3x75-4x100-5,5x125-6,5x150 mm
1267TX T6-T8-T10-T15-T20-T25-T30
Steel bit ratchet, with socket adapter and 80 mm extension bar
5 degree take-up angle
Set of 10 bits with magnetic bit holderin plastic case
Set of 10 bits with magnetic bit holder in plastic case
25 bits,1 connector and1 reversible ratchetin plastic case
NEW ITEM
7 magnetic bits, hexagon sockets, in plastic case
Socket handles• Suitable for jobs in small areas • Knurled head for quick approach
Screwdrivers
21
1262 PH0x60-PH1x80-PH2x100 mm
1260 2,5x50-3x75-4x100-5,5x125-6,5x150 mm
1263/D8 012630008
1262 PH0x60- PH1x80-PH2x100 mm
1262N PH1x30 mm
1260 3x75-3,5x100-4x125-5,5x150-6,5x150 mm
1260N 4x30 mm
1263/D10 012630010
1267TX/D7 012670307
1267TX T6-T8-T10-T15-T20-T25-T30
1203/D10N 012030019
1202 PH0x60-PH1x80-PH2x100 mm
1201 2,5x50-3x75-4x100-5,5x150-6,5x150 mm
1202N PH1x30 mm 1201N 4x30 mm
1203/D8P 012030018
1202 PH0x60-PH1x80-PH2x100 mm
1201 2,5x50-3x75-4x100-5,5x100-6,5x150 mm
1203/D12 012030012
1202 PH0x60-PH1x80-PH2x100-PH3x150 mm
1209PZ PZ1x80-PZ2x100 mm
1201 2,5x50-3x75-4x100-5,5x100-6,5x150-8x150 mm
Set of 8 screwdrivers
Screwdrivers
Set of 8 screwdrivers
Set of 10 screwdrivers
Set of 10 screwdrivers
Set of 7 screwdrivers
Set of 12 screwdrivers
22
150x95x50 mm
350x150x50 mm
335x145x60 mm
861LP 0,5-0,8-1-1,2 mm861PE 3-4-5-6-8 mm861PH PH0-PH1-PH2-PH3861TX T8-T10-T15-T20-T25-T30-T40895/1900 4-5-5,5-6-7-8-9-10-11-12-13-14 mm
900/20 50 mm900/21 150 mm900/25900/42
900BG/30900/55
900/C39 009000937
900/C12M 009000963
910A/C16 009100936
861LP 0,6x4,5-1,2x6,5-1,2x8 mm861PE 2,5-3-4-5-6 mm861PH 1-2-3861PZ 1-2-3
861RTX 10-15-20-25-27-30-40 mm892/0895/1 900 5-5,5-6-7-8-9-10-11-12-13-14 mm
900/20 50 mm900/2L 100 mm900/25
900BG/30C900/55
910A 6-7-8-9-10-11-12-13-1415-16-17-18-19-21-22 mm
910/21 125 mm910/22 250 mm910/25910/42910/55
Assortment of 11 hexagon sockets, 21 bits and 7 accessories in plastic case
Assortment of 12 hexagon sockets, 20 bits and 7 accessories in foam tray, in metal case
16 hexagon sockets and 5 accessories
Innovative sliding opening system
Sockets
23
420x185x60 mm
920A/C17M 009200924
902A/C22 009020807
928A/C12 009280955
920A 10-11-12-13-14-15-16-17-18-1920-21-22-24-27-30-32 mm
920/21 125 mm920/22 255 mm920/25920/42920/55
900 5-5,5-6-7-8-9-10-11-12-13 mm900/20 50 mm900/25900/55 920A 10-13-14-15-17-18-19-22-24
27-30-32 mm920/21 125 mm920/25920/55
420x185x60 mm
928A 22-24-27-30-32-34-36-38-4146-50-55 mm
928/21 200 mm928/22 380 mm928/25928/42928/55
530x220x80 mm
+
+
+
Innovative sliding opening system Assortment of 17 hexagon sockets and 5 accessories in foam tray, in metal case
Assortment of 22 hexagon sockets and 6 accessoriesin metal case
Assortment of 12 hexagon hand sockets and 5 accessoriesin sheet metal case
24
606/20 006060120
€ 0000,00 € 100,00
40÷200 Nm L= 440 mm 60÷330 Nm L= 560 mm
20÷100 Nm L= 345 mm8÷60 Nm L= 305 mm
UNI EN 26789 ISO 6789
Nm Kgfm lbf.ft L mm40÷200 0÷360° 4÷20 30÷150 1/2” 520
599DGT/A20 005990520
606/30 006060130
606/10X 006060111
606/20 006060120
606/6 006060105
NEW ITEM
Click-type torque wrenches with reversible ratchets for right-hand tightening torque accuracy: ±4%
Electronic torque wrench, torque and angle readout right-hand (accuracy: +/-2%) and left-hand (accuracy: +/-3%) tightening in plastic case
Internal data storage software: up to 9 torque/angle values can be presetReversible ratchet: allows for right-hand and left-hand tighteningDual measurement mode: peak hold and trackDual approach/stop signal: green LEDs, and, later, red ones, matched with a buzzer, inform user that set torque or angle has been reachedAntislip bi-material handlePower supply: 2 AA - 1.5V batteries (included)
Software and USB cable for downloading data onto PC!
Angle readout up to 360°
Torque wrenchesand multipliers
TORQUE+
ANGLE
25
583/6 1,2 ÷ 6 Nm
860LP 0,6x4,5 - 1x5,5 - 1,2x6,5 mm860PH PH1 - PH2 (x2) - PH3860PE 2-2,5-3-4-5 mm860TX T9-T10-T15-T20-T25-T27-T30-T40
882P/80 80 mm892/0 1/4”- 1/4”900 4-5-5,5-6-7-8-9-10 mm
Nm Kgfm lbf.ft 2500 250 1844 1/2” 1”
601 1/2” 006010001 601 3/4” 006010002
583/C31 005830931
560/C12 005600210
270x120x45 mm
400x260x110 mm
• For tightening screws to values set by measuring torsion angle • Complete with buzzer
and LED indicators informing user that preset angle has almost
or finally been reached
Electronic torque angleindicator in plastic case
Does not need any fixed reference point to anchor to
TECHNICAL DATAMale square drive 1/2” o 3/4”Measuring range -999°/+999°Accuracy ± 1%Reading clockwise/anticlockwisePower supply 3 1.5V batteriesResolution 0,1 °Display 32 digits – LCD – backlit
Torque screwdriver, 1.2 ÷ 6 Nm
Assortment of 1 torque screwdriver, 8 hexagon hand sockets, 20 bits and 2 accessories in sheet metal case with soft thermoformed tray
NEW ITEM
Torque multipliers for right-hand and left-hand
tightening in plastic case
Ratio: 12:1
26
1048BM 010480215
1169S/D2 011690140
1031/S4 0103100001057A 010570124
1082BM 160 mm
1151S 180 mm
1081S 160 mm
1032 180 mm 19 ÷ 60 mm
1038 175 mm 19 ÷ 60 mm
1036 175 mm 19 ÷ 60 mm
38 mm
1166BM 160 mm
1150BM 180 mm
1034 170 mm 19 ÷ 60 mm
1169BM/D3 011690123
L 250 mm
L 240 mm
1047BM 010470340Slip joint pliers, push buttonadjustment, bimaterial handles• Quick, accurate adjustment by pressing push button • No accidental misadjustment • Heat-treated jaws
Pliers
NEW ITEM
Slip joint pliers, boxed joint, bimaterial handles
Automatic self-locking pliers with adjustable force
Set of 1 combination pliers and 1 diagonal cutting nippers
Set of 4 circlip pliers
Set of 1 combination pliers, 1 long needle nose pliers and 1 diagonal cutting nippers
9 position model
27
31/B6 000310020
38/B6 000380006
30: Ø 2-3 mm
32: Ø 4 mm
34: 125-150 mm
36: 150 mm
Ø 2-3-4-5-6-8 mm
1370T/300 013700630
1370T/800 1370T/1000 013700680 013700700
1370T/500 013700650
1000 g
1380T 013800310
1500 g
1380T 013800315
Ø 35 mm
1392/35 013920035
Ø 50 mm
1392/50 013920050
Ø 40 mm
1392/40 013920040
Ø
300 g
800 g
500 g
1000 g
Hammers
Set of 6 pin punches in wallet
Mechanic’s hammers fibre shafts
Mason club hammers, plastic shafts
dead-blow hammers, with interchangeable plastic faces, steel shafts
Set of 6 drift punches, centre punches, flat chisels and cape chisels,
in wallet
28
374 003740032
L mm ø max ø max mm 320 1” gas 34
374 003740041
L mm ø max ø max mm 410 1” 1/2 gas 49
374 003740055
L mm ø max ø max mm 550 2”gas 60
342 003420030
L mm ø mm 200 0÷42 1”5/8
388C/C8 003880200
400x330x110 mm
Ø 10-12-14-16-18-20-22 mm
334 003340001
L mm ø mm 150 3÷30 1/8”÷1”1/8
Pipe wrenches, Swedish pattern, 45° slim jaws
Pipe bender with 7 forms, made of aluminium, for soft copper and light alloy pipesin plastic case
Ratchet-type shears for plastic pipes
Pipe cutter for copper and light alloy pipes
Aluminium forms
Plumbing tools
29
1771 017710000
1777BMT 017770050
1128BSX 011280060
1778D 017780060
1778SAFE 017780090
400x330x110 mm
Utility knife, 18 mm, 3 spare blades
Electrician’s scissors with graduated milling profiles with case
Foldaway knife with trapezoidal blade• 5 adjustable blade depths • String cutting groove • Supplied with 3 blades
• Designed to enlarge holes on plastic junction boxes and choke corrugated pipes • Jointed belt case • Bimaterial handles • Anti-loosening pin
Foldaway knife stainless steel blade and handle
Foldaway knife hardened steel blade with window breaking hammer, seat belt cutter and knot untying features• blade with cable cutter • shackle tightening blade • technical fabric bag
Cutting tools
Patented
NEW ITEM
NEW ITEM
NEW ITEM
30
1128BCX 011280080
1193/B8 011930108
1608/C9T 016080013
1256/C36-2 012560100
4 mm1256TX T3-T4-T5-T6-T7-T8-T9-T10-T151256RTX T6-T7-T8-T9-T101256LP 0,8-1,2-1,5-1,8-2-2,5-3-3,5-4 mm1256PE 0,7-0,9-1,3-1,5-2 mm1256PH PH000-PH00-PH0-PH11256PZ PZ000-PZ00-PZ0-PZ11256/201256/30
130x60x35 mm
1257LP 0,4x2-0,4x2,5 mm1257PH PH00-PH0-PH1
1177BM
1186BM1
994
4 mm2
1620
1624
1628
420x350x35 mm
50 mm2
Electrician’s scissors, straight stainless steel blades, with microteeth, cable cutting groove and crimping pliers for tube terminalsTube terminal crimping: 1÷4 mm²
Electronic maintenance set with technical fabric case
Pliers 1608 with assortment of 450 terminals
Bi-material microscrewdriver with 36 interchangeable 4-mm bits and magnetic extension
for precision jobs
Tools for electrotechnical maintenance
With cable cutting and crimping features
NEW ITEM
NEW ITEM
1,5-2,5-6 mm2 50x each1,5-2,5-6 mm2
50x each1,5-2,5-6 mm2 50x each
31
1640K 016400001
1609B 0160901011149F 011490010
0,2÷6 mm2
28÷17 AWG
10÷120 mm2
L 600 mm
1272MQ PH0x60-PH1x80-PH2x100 mm
1273MQ/D6 012730851 1169MQ/D2 011690143
1274MQ 3x100-4x100-5,5x125 mm
IEC 60900
1082MQ 160 mm
1150MQ 180 mm
+
Tools for electrotechnical maintenance
Oil-pressure punching machinein case• For punching sheet steel, aluminium and plastic up to 3 mm in thickness • Swivel head for the best working position under any condition.
Mechanical crimping pliers• For noninsulated copper terminals, 10÷120 mm² • Antislip rubber handle • Internal “H” section pin for unparalleled punch smoothness • Made from burnished steel
Contents: 1640 T22.5 round punch 22.5 mm 1640 T25.5 round punch 25.5 mm 1640 T32.5 round punch 32.5 mm 1640 T55.5 round punch 55.5 mm 1640 A spacer 20 mm 1640 P9 threaded pin 9.5 mm 1640 P19 threaded pin 19 mm 1640 punch press
Available on request: 1640 Q45 square punch 45x45 mm with pin
Front wire stripping pliers with cutting blade, self-adjusting
Set of 6 screwdrivers Assortment of insulated combination pliers and insulated diagonal cutting nippers
32
500x337x60 mm
446/C110 004460060
430M
mm 2x0,4 3x0,5 4x0,7 5x0,8 6x1 7x1 8x1,25 9x1,25 10x1,5 11x1,5 12x1,75 14x2 16x2
433M
mm 6x0,75 7x0,75 8x0,75 8x1 9x0,75 9x1 10x0,75 10x1 10x1,25 11x0,75 11x1 11x1,25 12x0,75 12x1 12x1,25 12x1,5 14x1 14x1,25 14x1,5 16x1 16x1,5 18x1,5
440/440AM
mm 2x0,4 3x0,5 4x0,7 5x0,8 6x1 7x1 8x1,25 9x1,25 10x1,5 11x1,5 12x1,75 14x2 16x2
441/441AM
mm 6x0,75 7x0,75 8x0,75 8x1 9x0,75 9x1 10x0,75 10x1 10x1,25 11x0,75 11x1 11x1,25 12x0,75 12x1 12x1,25 12x1,5 14x1 14x1,25 14x1,5 16x1 16x1,5 18x1,5
IIII
435/0435/3
444/1444/2
436/1
115x170x40 mm
115x170x40 mm 100x145x40 mm
115x170x40 mm
412/SP19P 004120429 416/SP19P 004160429
425E/SP3 004250600415CO/SP19 004150439
ø 1÷10 x 0,5 mm
ø 1÷10 x 0,5 mm
ø 1÷10 x 0,5 mmØ 4÷12; 4÷20; 4÷30 mm
135°
115°
Assortment of chrome-steel taps and dies, metric thread,
and accessories for car repair jobs
in wooden case
Twist drills with cylindrical shanks,HSS, entirely ground glossy finishing
Twist drills, HSS,with special grinding,double cone penetration
Set of 3 stepped drills, HSS, enhanced grinding efficiency
Twist drills with cylindrical shanks, HSS-CO 5%, entirelyground glossy finishing
Higher cuttingspeed
For drilling into stainless steel, alloy steel, cast iron, mild steel, light alloys
Drilling and threading tools
NEW ITEM
33
1651DGT/P 016510120
1692/3 016920053
1692/5 016920055
S S 16 mmL 3 m
1692/2 016920052
1547/C6 015470006
L 2 m S 16 mm L 5 m S 19 mm
1692/8 016920058 L 8 m S 25 mm
DIN 862
420x185x60 mm
Pullers
Digital vernier, reading to 0.01 mm / 0.0005”,in plastic case
Dummy ball bearing extractors
Measuring tapes, shock-resistant bi-material
ABS casings, steel tapes,
precision class II
Measuring range 0÷150 mm mm/inch conversion
Bearings:
1547/1 6011-6014, 6206-6211, 6303-6308, 6403-6405 1547/2 6004-6010, 6200-6205, 6300-6304
Measuring tools
34
1429/SB7 014290107
1500/1 015000301 1500/3 015000303
1500/4 0150003041500/2 015000302
1517/90 015170000 1517/200 015170020
1517/260 0151700301517/150 015170010 22 mm - 19 mm
22 mm - 19 mm 22 mm - 19 mm
30 mm - 27 mm
1428/SB5 014280115
2-3-4-5-6 mm
1428/SB11 014280111
15-16-17-18-19 mm 8-10-11-12-13-14 mm
8-10 mm
Two-leg universal pullers Three-leg self-locking pullersSimultaneous leg opening. Self-locking effect
Load 6000 kg - Ø 25÷150 mm
Load 6000 kg - Ø 40÷200 mmLoad 6000 kg - Ø 18÷90 mm
Load 4500 kg - Ø 25÷130 mm Load 6000 kg - Ø 60÷200 mm
Load 6000 kg - Ø 50÷160 mmLoad 4500 kg - Ø 25÷80 mm
Load 8000 kg - 50÷260 mm
Set of pullers for damaged screws and stud bolts with square drive
Set of pullers for damaged right-hand nuts with SB2 guide 20-21-22-24-27 mm
Set of pullers for damaged nuts with square drive
Double nut
NEW ITEM
35
280 mm
200 mm
330 mm1740 B280 017400280 1740 B330 017400330
1719BMA/S5 017190070
+
-
1741U 017410450
1749AC 0174900051750 500 017500500
8”200 mm
550 Bar
230 mm
Ø 50 mm
22 mm - 19 mm
30 mm - 27 mm
Q
T
P
M
R
Load 6000 kg - Ø 40÷200 mm
Compact heavy-duty riveting pliers
Compact riveting pliers
Set of 5 second cut files
High thrust gun for chemical binders
Lever operatedgrease guns, 500 cc
• Optimized lever ratio for increased compactness and handiness. • 3 jaws lock rivet for a perfect grip. • Adjustable head for pulling rivet by 2 to 5 leg movements.
3 jaws: improved rivet grip
3 jaws: improved rivet grip
With stem tank
General maintenance tools
NEW ITEMNEW ITEM
2,4÷4,0 mm steel
3,2÷6,4 mm steel2,4÷4,8 mm steel
36
1860K/140A 018600014
1860K/160A 018600016
MAX 3.0 KVA
MAX 3.7 KVA
1827K 018270100
1834L 018340025
450 Lumen
Inverter welding machine, suitable for motor generators, compact and easy to carry. Complete with cables, hammer brush, mask and shoulder strap.
Gas soldering iron with 7 accessories in case with soft polyethylene foam base• Power: 30 watts to 125 watts • Tip temperature can be adjusted between 250 °C and 500 °C • Gas flow regulator • Warm-up time: 15 seconds • Tank contains gas for 120 minutes’ non-stop operation • Clear tank for monitoring gas level • Can be refilled with butane gas
1860K/140A 1860K/160AAdjustment current 5-130A 5-155APower supply 1x230V 1x230VAbsorbed power MAX 3,0 KVA MAX 3,7 KVA
Use factor35% - 130 A60% - 80 A
100% - 70 A
35% - 150 A60% - 130 A
100% - 100 ADelayed fuse 20 A 20 AProtection IP23 IP21Use with generators Operating temperature -15/+40° C (+5/+104° F) -15/+40° C (+5/+104° F)Usable electrodes Ø 1.5 - 3.25mm Ø 1.5 - 4mm
High-brightness LED torch, made from sturdy anodized aluminium, up to 450 lumens• 3xAA batteries not included
NEW ITEM
37
1837E 018370501
1837 018370001
CLICK!
230 m
m
1838/10LED 018380000
1860K/140A 1860K/160AAdjustment current 5-130A 5-155APower supply 1x230V 1x230VAbsorbed power MAX 3,0 KVA MAX 3,7 KVA
Use factor35% - 130 A60% - 80 A
100% - 70 A
35% - 150 A60% - 130 A
100% - 100 ADelayed fuse 20 A 20 AProtection IP23 IP21Use with generators Operating temperature -15/+40° C (+5/+104° F) -15/+40° C (+5/+104° F)Usable electrodes Ø 1.5 - 3.25mm Ø 1.5 - 4mm
Magnetic, articulated lamp with high-illuminated LEDs,matt aluminium body
• Specially suitable for lighting areas which are difficult to reach with conventional lamps. • Can be hooked by means of hose or magnet to bottom. • Intense, uniform lighting. • Splashproof. • Operates with 3 AA batteries, not included.
Rechargeable inspection lamp with ultra-high brightness LEDs Lithium polymer battery
Easy-to-replace front glass
Swinging hook
• Compact body made of antislip rubber
LED floodlight for building yards, 30W
Ultrahigh-efficiency, shock-resistant LED 50,000 life hours
IP66 aluminium body
NEW ITEM
38
1844BM 018440104 1844ABM 018440102
230V
L= 15,5 m
IP55 IP42
24V
230V
IP20
1840BM 0184001011848 018480015
Automatic cable reel with fluorescent inspection lamp
230V inspection lamp, base type: E27
• 2 hooks • 10-m-long power cable
• Bulb not included
• With 230/24V safety transformer • 11W bulb included
• 24 Vac• 11W bulb included
Automatic cable reel with Schuko type socket• Max. 1600 W with unwound cable• Max. 1100 W with wound cable• Cable 3x1.5 mm² - 15 m
NEW ITEM
39
961P6 009610000
961P4 009610004
1759 017590251
1760K/MT 017600200
400x290x110 mm
961P6/S2 2 6 009610262
961P6/S3 3 6 009610263
961P4 961P6 L (m) Ø mm
961P6 961P445° mirror and magnet Internal memory 64MB 64MBTV-OUT feature Sensor pixels 640x480 640x480Maximum resolution 320x240 320x240Probe length 1 m 1 mCamera diameter 6 mm 4,5 mmVideo formats MPEG4, 3GP, AVI,ASF. MPEG4, 3GP, AVI,ASF.Photo formats JPEG JPEGShooting angle 0÷180° 0÷180°Power supply 3,7V 2000 mAh 3,7V 2000 mAh
• TFT LCD 3.2” screen• Supports SD cards and flash memories (8 GB)• Internal memory: 64MB• TV-OUT feature• 4 LEDs• Power supplied by USB port (built-in battery)
Electronic videoscope withflexible probeAllows videos or individual imagesto be directly watched and recorded on instrument.
Diagnostics
NEW ITEM
NEW
ITEM
Optical analyzer for coolant, battery, windscreen and AdBlue® fluids Supplied in a hard case
Automatic temperature compensation Battery acid: measurement range:
1.1÷1.3 kg/l Propylene coolant: -25 °C ÷ -50 °C
Ethylene coolant: -25 °C ÷ -50 °C Windscreen fluid: -10 °C ÷ -40 °C
AdBlue: Urea percent measurement: 30% ÷ 45%
Digital automotive multimeter with infrared thermometer
and induction clamp in plastic case
DC voltage: 400mV-4/40/400/600V AC voltage: 400mV-4/40/400/600V DC current: 40/400mA-20A AC current: 40/400mA-20A Resistance: 400Ω-4/40/400KΩ-4/40MΩ Capacity: 4/40/400nF-4/40/400µF-4/40mF Frequency: 4/40/400KHz-4/40MHz Continuity test: <35Ω Dwell angle function: 4-8 Cil Duty cycle function: 0.5% ÷ 99.0% Pulse amplitude: 1.0 ÷ 20.0 ms Diode test: test current 1.0mA Peak storage function Data storage function Auto-range function Multimeter power supply: 1 9V battery (included) Laser thermometer temperature: -30 °C ÷ + 550°C (fixed emissivity: 0.95) Type K thermocouple temperature: -30 °C ÷ +1000 °C Thermometer power supply: 1 9V battery (included) Induction clamp: 4 strokes, 600 ÷ 4000 RPM 1000 ÷ 12000 RPM (x10RPM) 2 strokes, 300 ÷ 4000 RPM 1000 ÷ 6000 RPM (x 10RPM)
NEW ITEM
40
960TP 009600300
960TAP 009600350
960AD/TP2 009600510
1760PA/AC-DC 017600000
430x310x50 mm
370x310x80 mm
280x240x77 mm
Digital pressure tester with wireless module Makes it possible to measure the following: • petrol engine compression • diesel engine compression • oil pressure • low pressure common rail • petrol injection pressure
SPECIFICATIONS:• bar: 0-80
• Resolution: 0.1 bar• Storage of maximum
pressure value• Backlit LCD display
• Software in 6 languages (I, EN, F, ES, PL, NL)
• Environmental pressure adjustment
• Sensor accuracy: +/- 1% (0÷60 bar)
+/- 2% (60÷80 bar)• Sensor can be removed
and replaced
Measuring range: 0-2000 bar / 0-29000 psi
Resolution: 1 barStorage of maximum pressure value
Display: Graphic LCD 64x128 pixels, backlitEnvironmental pressure adjustment
Sensor accuracy: +/- 1%Wireless data transmission to PC
Automatic engine start from testerOverpressure limit: 3000 bar
Software in 6 languages: I-EN-F-ES-PL-NL
Set of adaptors for item 960TP in plastic caseContents: • Dummy injectors• Dummy glow plugs • Spark plug adaptors• Oil cap adaptors • Petrol injection couplers • Set of spare gaskets
Allows high-pressure pump of common rail systems to be checked• Dynamic test: allows, with engine running, actual pressure in common rail circuit to be measured.• Maximum pressure test: allows high-pressure pump to be checked compared to manufacturer’s values• Supplied with 2 high-pressureconnectors (500 mm)
Common rail diagnosis
WIRELESSDigital common rail high pressure tester
Amperometric clamp and digital multimeter
SPECIFICATIONS- Allows DC and AC
• measurements up to 1000 A • Integrated multimeter function
A: AC/DCV: AC/DCSPECIFICATIONSDC voltage: 0.1mV ÷ 600VAC voltage: 0.1mV ÷ 600VAC current: 0.01A ÷ 1000ADC current: 0.01A ÷ 1000AResistance: 0.1Ω ÷ 40MΩCapacity: 0.001nF ÷ 40 µFFrequency: 0.001kHz ÷ 4kHzTemperature: -40°C ÷ 1000 °C -40°F ÷ 1832°F
WIRELESS
41
1-110 Ah 12 Volt
IP651498CB/80 014980308
1498B/12 014980205 1498B/24 014980224
1498CB/300 014980330
12V 12-24V
!
70%
100%
50%
20%
0%
1498TB/ST 014980471
8 kg 17 kg+
Electronic car/motorcycle battery charger
Electronic battery charger
Portable car starter, 12 Vwith battery chargerTECHNICAL DATA: • Pickup current: 2200 A • 230 V battery charger
Portable car and commercial vehicle starter, 12-24 V
TECHNICAL DATA • Pickup current: 4200 A (12 V),
2100 A (24 V) • Useful recharging cycles: 400
Sealed lead acid battery, solid electrolyte (AGM) type
• Shoulder strap included
• For all battery types: Wet, Mf, Dry, Agm, Gel • Monitors batteries and keeps them
charged during idle periods • Checks and performs charging cycle as managed
by a microprocessor in three distinct stages, in accordance with DIN 41772
Charging and holding feature
Connector for lighter socket
Digital tester with printer for testing battery and starter in plastic caseAllows the following batteries to be tested:• WET, flat AGM, spiral AGM, VRLA/GELIncludes a CD with codes decoding software
Measures state of charge, capacity and efficiency of battery• Tests alternator for efficiency• Tests starter
SPECIFICATIONS- Battery tests: 6 and 12 Volts- Operating range: 40-2000CA (SAE)- Reference standards: SAE,DIN,EN,IEC,JIS- Voltmeter: 1.5-30V- Screen: backlit 4-line LCD display- Thermal printer- Software languages: EN-F-E-D-I-P-NL- Supplied with: 1 printing paper roll, 6 AA size 1.5V batteries
NEW ITEM
Battery
42
1489/C14 014890100
3002 030020001
867PE 8 mm867PE/L 8 mm
867XZN/L M10867TX/L T50
867/2 1/2”920B 10 mm
1489/331489/33P M 10
1489R1489Y
1489/31T T 501489/E 10 mm
188 10 mm188 15 mm
420x185x60 mm
920FTX E10-E12-E14-E16-E18920TX T30-T40-T45-T50-T55
920XZN 8L-10L-12L-14L920ES 7-9-10-12L
3003 030030001
Wheel Ø: 76 mm
920MIX/C18 009200600
420x250x45 mm
+
Assortment of 14 tools for free alternator pulleys
Allows pulleys of BOSCH - VALEO - MARELLI
alternators to be removed
Creeper and seat• Steel frame • PVC lining with upholstery • Easily convertible into a creeper or a seat
2 products in 1: creeper or seat
Creeper made of shockproof
plastic
Assortment of 18 socket drivers with heads specifically designed for car repair jobs in metal steel case
Engine
NEW ITEM
NEW ITEM
NEW ITEM
43
400x300x60 mm
250x130x50 mmØ
mm
960KC 009600800
1879 0187900011484 014840010
960PI 009600215
NEW ITEM
NEW ITEM
NEW ITEM
Assortment of reamers for cleaning injector seats
in plastic caseFor removing residues from injector seats
• Flat reamer, Ø 19 - 15 mm, for universal injectors • Flat reamer, Ø 17 - 17 mm, for Delphi/Bosch injectors (BMW/PSA/Renault/Ford)
• Flat reamer, Ø 19 - 17 mm, for Bosch injectors (Mercedes CDI). • Angled reamer, Ø 21 - 17 mm, for Fiat/Iveco injectors.
• Handle
Assortment of tools for removing broken or damaged glow plugs M8• For glow plugs with thread M8x1.0 mm • Allows broken glow plugs stuck in head to be easily removed
9.5 l manual/pneumatic operation fluid extractorSuitable for: engine oil, gearbox oil, brake fluid, coolant, water etc.• Can be used with both manual pump and compressed air• operating pressure: 3-12 bar• fluid temperature range (1-95 °C)• supplied with 4 nylon joints for different purposes
Set of 2 tools for removing and installing stretch belts
Allows stretch belt to be quickly removed and correctly installed, without risking damaging it
Installed
Removed
44
335x145x60 mm
400x300x60 mm
420x280x60 mm
400x300x60 mm
1461/C13A 014610131 1461/C13B 014610132
1461/C5A 014610051 1461/C11A 014610111
335x145x60 mm
1461/C10A 014610101
Timing devices for Fiat 1.4 Multiair engines
Timing devices for Fiat 1.6 Multijet engines
Timing devices for Renault 2.0 dci engines
Timing devices for Fiat 0.9 Twinair turbo engines
Timing devices for Audi, Seat, Skoda, Volkswagen 1.9 - 2.0 TDI
NEW
ITEM
NEW
ITEM
NEW
ITEM
NEW
ITEM
45
1495/C6 014950500
420x185x60 mm
530x400x100 mm
1493/C30 014930000 1452PN/K 014520110
1492/T40 014920540
1492/T75 014920575 1472TM 014720200
H mm ø mm 40 125÷145
H mm ø mm 75 120÷140ø
H
ø
H
Assortment of tools for repairing oil sump threadsAllows oil discharge screw threads to be quickly and easily repaired
• Damaged thread is removed by screw tap and enlarged by one size • Allows repairs and avoids replacing oil sump Contents: • 1 screw tap M13x1.25 + 6 screws + 12 washers • 1 screw tap M13x1.5 + 6 screws + 12 washers • 1 screw tap M15x1.5 + 6 screws + 12 washers • 1 screw tap M17x1.5 + 6 screws + 12 washers • 1 screw tap M20x1.5 + 6 screws + 12 washers • 1 screw tap M22x1.5 + 6 screws + 12 washers
Set of 28 oil filter wrenches• For tightening and loosening oil filters • 1/2” female drive • In plastic caseSizes included in kit Ø mm / n° of sides1493: 65/14 - 67/14 - 68/14 - 73/14 - 74/15 76/15 - 75.77/15 - 76/14 - 76/8 - 78/1580/15 - 82/15 - 86/16 - 90/15 - 92/1093/15 - 95/15 - 100/15 - 106/15 - 108/151493PF (Purflux)66/6 - 76/12 - 76/30 - 86/1893/36 - 93/45 - 96/18 - 108/18 - Includes 1 adjustable oil filter wrench Ø 65-120 mm
Pneumatic tool for engine valve springs
• Allows valves to be quickly and easily dismantled and assembled
• Adaptors: Ø 16-19-23-25-30-42 mm • Thrust pressure: 1400 N
Drier filter wrenches• 1492 T40 jobs in small areas • 1492 T75 for heavy-duty jobs Quick coupler pliers
for multijet filters
NEW ITEM NEW ITEM
46
1949DGT 019490020
969/C5 0096902001566N 015660010
1569 015690010
470x400x100 mm
Ø mm mm L mm 35÷45 27 400 1,5 kg
Ø
Digital tyre inflator• operating pressure: 0÷11 bar (2.0÷160 psi) • 4 units of measurement: psi/bar/kgcm2/kpa • backlit LCD display • reset feature • self-power off after 3 minutes • pressure release button • hose length: 53 cm • resolution: 0.05 bar • ABS housing, protective rubber shell on gauge, shockproof, nonslip handle grip • power supply: 2 AAA size 1.5 V batteries
Assortment of tools for extracting and insertingrear axle silent blocks, driving shaft oil seals and wheel bearings• Bushings can be used both on vehicle and on hydraulic press • Direct extraction with wrench • User-friendly, no pneumatic or hydraulic machines required • The kit comprises: 4 threaded bars: M10-M12-M14-M16 4 washers bushing for diameters ranging from 44 mm to 82 mm
Set of 5 hub nut locking sockets in plastic case- 1 hexagon socket item 969A, 35 mm- 4 bi-hex sockets item 969B, 30-32-34-36 mm
Tool for removing/installing
steering armsNEW ITEM
NEW ITEM
47
350x3101x85 mm
1471M/C22 014710101 1467LF 014670100
3012I 030120250
Pneumatic tool for pushing back and rotating right and left disc brake pistons with accessories in plastic case
• Automatic jack • New assortment complete with all new adaptors • Thrust: 150 kg • Operating pressure 5÷8 bar
Electric instrument for brake fluid replacementAllows brake fluid to be easily and quickly replaced on vehicle
• Automatically stops when tank is empty, thereby preventing air from being let in • Maximum tank volume: 20 l • Operating pressure: 0.4÷3.5 bar • Power supply: 230V Supplied with: • Brake oil recovery tank • 1 universal cap + 1 standard cap E20
Lower engine bracketSupports engine when brackets are removed, while timing belt, water pump, gearbox etc. are being replaced Easy and quick to apply; maintenancejobs can be carried out by one operator.
Brakes
TECHNICAL DATAChassis extension: 630 ÷ 960 mmSupporting plate travel: 190 mmTotal weight: 7.2 kg
NEW ITEM
48
3041 030410001
3041A/11 030410511 3041A/15 030410515
3042 030420001
NEW ITEM
Front motorcycle stand adjustable• Matt black lacquer • Polyamide slider holder • 4 thermoplastic rubber wheels
Front stand for motorcycle steering pin• Matt black lacquer • 4 thermoplastic rubber wheels • Includes a 6-pin kit
Includes a 6-pin kit
Roller sliders, pair for item 3041
Cone-shaped sliders, pair for item 3041
49
3040 030400001
3040A/1 030400501 3040A/2 030400502
3043 030430001
Rear motorcycle stand adjustable
• Matt black lacquer • Polyamide slider holder
• 4 thermoplastic rubber wheels
V-shaped sliders, pair for item 3040
NEW ITEM
Item for 3040A/1
3040A/6 Pawls, pair, made of aluminium M6x1 mm 030400506
3040A/8 Pawls, pair, made of aluminium M8x1.25 mm 030400508
3040A/10 Pawls, pair, made of aluminium M10x1.25 mm 030400510
L-shaped sliders, pair, made
of rubber for item 3040
Motorcycle stand with left single arm• Matt black lacquer
• Polyamide slider holder • 4 thermoplastic rubber wheels
Item Pin 3043A/41 Ducati 030430541 3043A/42 Triumph 030430542 3043A/43 MV 030430543 3043A/44 Ducati 1098 030430544 3043A/45 Honda 030430545 3043A/46 BMW F800S 030430546
3043A/47 BMW K,R,S 030430547
50
3030/2T 030300020
H min85 mm
2 t
H max520 mm
1550/A13 015500100
+Jacking
Pneumatic compressor for MacPherson and equivalent shock absorber springsMaximum force 960 kg Acessories supplied with compressor: 1 basket 1 vice 3 spring forks 90÷205 mm
• Operating pressure:
6 bars - max. 8 bars
• Mean air consumption:
225 l/min
1557T Socket case for disassembling and tightening car shock
absorber heads 14-16-17-18-19-21-22-24-27 mm
Pedal allows easy approach
steady, easyto handle
Lowered hydraulic car jack, 2 t with 6 wheels• Car jack can be easily handled on uneven, irregular floors • Minimum plate height: 85 mm • Maximum plate height: 520 mm • Length: 860 mm • Width: 400 mm • Maximum capacity: 2 tons
• Dual front tilting wheels made of plastic material (PTFE)
NEW ITEM
51
680 Nm
1,56 kg1927MDA/K4 019270128
1927CD 019270007
191 mm
186 mm
1927DA 019270033
183 mm
223 mm
122 mm
170 mm
1,9 kg 2,7 kg
1927K4 019270104
720L17-19-21-22 mm
198 mm
223 mm
300x250x80 mm
360x320x85 mm
+
Assortment of one compact reversible wrench and four
impact sockets• Amazingly compact and powerful
• Reversible lever • Three power adjustable
screwing positions
720 17-19-22-24 mm
Free speed rpm 11.000Maximum torque Nm 680Impulse device Double hammerBolt capacity Cl 8.8 M2234 mmBolt capacity Cl 12.9 M1827 mmAir inlet GAS 1/4”Working pressure Bar 6,2Mean air consumption l/min 160
Reversible impact wrench, made from composite material• Lightweight and well-balanced for enhanced ease of use
Free speed rpm 7.000Impulse device Double hammerMaximum torque Nm 1.020Bolt capacity Cl 8.8 M2234mmBolt capacity Cl 12.9 M1827mmAir inlet GAS 1/4”Working pressure Bar 6,2Mean air consumption l/min 130
Reversible impact wrench• Three power adjustable screwing positions
Free speed rpm 7.000Impulse device Double hammerMaximum torque Nm 650Bolt capacity Cl 8.8 M2234mmBolt capacity Cl 12.9 M1827mmAir inlet GAS 1/4”Working pressure Bar 6,2Mean air consumption l/min 155
Assortment of one reversible impact wrench and four impact sockets, long series• Three power adjustable screwing positions • Exhaust through handle • Balancing hook
Square drive 1/2”Free speed rpm 7.000Impulse device Pin clutchMaximum torque Nm 610Bolt capacity Cl 8.8 M2234mmBolt capacity Cl 12.9 M1827mmAir inlet GAS 1/4”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 175Weight kg 2,7
Pneumatic tools
Compact andpowerful
NEW ITEM
Pneumatic compressor for MacPherson and equivalent shock absorber springs
52
1928K4 019280104
1928CD 019280007
728L 27-30-32-36 mm
258 mm
230 mm
235 mm
210 mm
3,5 kg
1930HLA 019300040
10,6 kg
9” (280 mm)
+
+
Reversible impact wrench, made from composite material
Assortment of one reversible impact wrench and four impact sockets, long series
• Lightweight and well-balanced for enhanced ease of use • High torque 1800 Nm
• Three power adjustable screwing positions • Exhaust through handle • Slip-proof handle
Square drive 3/4”Free speed rpm 4.000Impulse device Pin clutchMaximum torque Nm 1.493Bolt capacity Cl 8.8 M2741mmBolt capacity Cl 12.9 M2436mmAir inlet GAS 3/8”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 260Weight kg 5,2
Free speed rpm 4.500Impulse device Double hammerMaximum torque Nm 1.800Bolt capacity Cl 8.8 M2741mmBolt capacity Cl 12.9 M2436mmAir inlet GAS 3/8”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 215
Reversible impact wrench• Auxiliary handle • Reversible lever • Three power adjustable screwing positions • Upper exhaust
Free speed rpm 3.000Impulse device Double hammerMaximum torque Nm 3661Bolt capacity Cl 8.8 M4265mmBolt capacity Cl 12.9 M3350mmAir inlet GAS 1/2”Working pressure Bar 6,2Internal hose size (Ø) mm 13Mean air consumption l/min 460
High torque 3661 NmNEW ITEM
53
1937 019370001
1933 019330001
1938 0193800211938R/S5 019380055
159 mm
38,5 mm
1 kg
860 g
380 g
150 mm 110 mm
5 mm
80 mm
L mmR/L1 55R/L2 90R/L3 50R/L4 16R/L5 36
R/L1
LL
L
L
L
R/L2R/L3
R/L4R/L5
1921I 019210035
275 mm
46 mm
101Nm
1,28 kg
NEW ITEM Windscreen remover
Set of 5 blades for item 1938
• Supplied with 1 55-mm straight blade • Piped exhaust
Roto-orbital palm sander, lubrication free, made fromcomposite material
• Extremely compact and easy to handle • 6-hole Velcro pad • Continuous motor speed adjustment • Antislip, soft material handle • Designed for connection to suction systems with swivel fittings • Revolving exhaust
Die grinder• Lightweight and handy • Slip-proof housing and handle • Knob speed regulator • Swivel air inlet • Silenced rear exhaust
Impact reversible ratchet• “Pin Clutch” impulse device • Faster than standard ratchets • Ergonomic rubber handle • Rear exhaust• Swivel air inlet
NEW ITEM
Pad size 150 mmOrbit diameter 5 mmFree speed 12.000 rpmSpindle thread 5/16”-24Air inlet GAS 1/4”Working pressure 6,2 BarMean air consumption 170 l/minInternal hose size (Ø) 10 mm
Chuck capacity 3 - 6 mmFree speed 25.000 rpmPower 0,20 KwAir inlet GAS 1/4”Working pressure 6,2 BarMean air consumption 230 l/minInternal hose size (Ø) 10 mm
Oscillations/minute 20.000Air inlet GAS 1/4”Working pressure 6,2 BarMean air consumption 200 l/minInternal hose size (Ø) 6,5 mm
Free speed rpm 400Maximum torque Nm 101Bolt capacity Cl 8.8 M1016mmBolt capacity Cl 12.9 M813mmAir inlet GAS 1/4”Working pressure Bar 6,2Mean air consumption l/min 235
Square drive 3/4”Free speed rpm 4.000Impulse device Pin clutchMaximum torque Nm 1.493Bolt capacity Cl 8.8 M2741mmBolt capacity Cl 12.9 M2436mmAir inlet GAS 3/8”Working pressure Bar 6,2Internal hose size (Ø) mm 10Mean air consumption l/min 260Weight kg 5,2
Free speed rpm 3.000Impulse device Double hammerMaximum torque Nm 3661Bolt capacity Cl 8.8 M4265mmBolt capacity Cl 12.9 M3350mmAir inlet GAS 1/2”Working pressure Bar 6,2Internal hose size (Ø) mm 13Mean air consumption l/min 460
54
7825
7827 7829
7820
7821
7823
XSSMLXLXXLXXXLXXXXL
7820000078200001782000027820000378200004782000057820000678200007
XSSMLXLXXLXXXLXXXXL
078210000078210001078210002078210003078210004078210005078210006078210007
XSSMLXLXXLXXXLXXXXL
7823000078230001782300027823000378230004782300057823000678230007
XSSMLXLXXLXXXLXXXXL
7825000078250001782500027825000378250004782500057825000678250007
XSSMLXLXXLXXXLXXXXL
7827000078270001782700027827000378270004782700057827000678270007
XSSMLXLXXLXXXLXXXXL
7829000078290001782900027829000378290004782900057829000678290007
Work overalls, multipocket style• Made of twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2• Front closure with YKK® double tab zip, covered with a strap flap
Sleeveless work jacket• Made of twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2 • Central YKK® zip
Work jacket• Made of twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2 • Front closure with YKK® double tab zip, covered with a strap flap
Work trousers, multipocket style• Made of twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2 • Central YKK® zip
Work Bermuda shorts, multipocket style• Made of twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2 • Central YKK® zip • Cerniera centrale YKK®
Work overalls, multipocket style• Made of twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2 • Central YKK® zip
Workwear
55
7901E
7905E
7907E 7909E
7900E
7903E
7904E
XSSMLXLXXLXXXLXXXXL
079010900079010901079010902079010903079010904079010905079010906079010907
XSSMLXLXXLXXXLXXXXL
079070900079070901079070902079070903079070904079070905079070906079070907
XSSMLXLXXLXXXLXXXXL
079050900079050901079050902079050903079050904079050905079050906079050907
XSSMLXLXXLXXXLXXXXL
079090900079090901079090902079090903079090904079090905079090906079090907
XSSMLXLXXLXXXLXXXXL
079040900079040901079040902079040903079040904079040905079040906079040907
XSSMLXLXXLXXXLXXXXL
079030900079030901079030902079030903079030904079030905079030906079030907
XSSMLXLXXLXXXLXXXXL
079000900079000901079000902079000903079000904079000905079000906079000907
Work overalls• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2
Sleeveless work jacket, multipocket style• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2
Work shorts• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2
Work jacket• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2
Work trousers, multipocket style• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2
Work overalls• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2
Work bomber jacket, padded, lined• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2
• 100% polyester padding, 100 g/m2
56
7865E
7867E
XSSMLXLXXLXXXLXXXXL
078670900078670901078670902078670903078670904078670905078670906078670907
XSSMLXLXXLXXXLXXXXL
078690900078690901078690902078690903078690904078690905078690906078690907
XSSMLXLXXLXXXLXXXXL
078650900078650901078650902078650903078650904078650905078650906078650907
7869E
7860E
7863E
7861E
XSSMLXLXXLXXXLXXXXL
078610900078610901078610902078610903078610904078610905078610906078610907
XSSMLXLXXLXXXLXXXXL
078630900078630901078630902078630903078630904078630905078630906078630907
XSSMLXLXXLXXXLXXXXL
078600900078600901078600902078600903078600904078600905078600906078600907
NEW ITEM LIGHTWork overalls, lightweight • T/C twill, 65% polyester, 35% cotton, 180 g/m2 • Inserts and knee lining made of 300D Oxford • Cuffs with strap adjusters • Front closure with double tab zip, puller and strap closure flap • Elastic waistband • Back shoulder panel lined with polyester mesh
Sleeveless work jacket, multipocket style, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2 • 300D Oxford inserts • Front closure with zip and puller
Work jacket, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2 • 300D Oxford inserts
Work trousers, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2 • Inserts and knee lining made of 300D Oxford
Work overalls, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2 • Metal zip closure and jeans-type button
Work Bermuda shorts, lightweight• T/C twill, 65% polyester, 35% cotton, 180 g/m2 • Metal zip closure and jeans-type button
57
7931P
7935P
7937P 7939P
7930IP
7933P
7930P
XSSMLXLXXLXXXL
079350100079350101079350102079350103079350104079350105079350106
XSSMLXLXXLXXXL
079310100079310101079310102079310103079310104079310105079310106
XSSMLXLXXLXXXL
079300100079300101079300102079300103079300104079300105079300106
XSSMLXLXXLXXXL
079330100079330101079330102079330103079330104079330105079330106
XSSMLXLXXLXXXL
079300200079300201079300202079300203079300204079300205079300206
XSSMLXLXXLXXXL
079370100079370101079370102079370103079370104079370105079370106
XSSMLXLXXLXXXL
079390100079390101079390102079390103079390104079390105079390106
Work overalls• 100% cotton, 260 g/m²
Sleeveless work jacket• In 100% cotton, 260 g/m2
Work shorts• In 100% cotton, 260 g/m2
Work jacket• In 100% cotton, 260 g/m2
Work trousers, lined• In 100% cotton, 260 g/m2
• Flannelette lining, 115 g/m2
Work overalls• In 100% cotton, 260 g/m2
Work trousers• In 100% cotton, 260 g/m2
58
EN 20345 S1P SRCEU UK 35 2,5 07246023536 3,5 07246023637 4,5 07246023738 5 07246023839 6 07246023940 6,5 07246024041 7 07246024142 8 07246024243 9 07246024344 10 07246024445 10,5 07246024546 11 07246024647 12 07246024748 13 072460248
7246B
EN 20345 S1P SRC
EN 20345 S3 RS SRC
EN 20345 S1P SRCEU UK 35 2,5 07241023536 3,5 07241023637 4,5 07241023738 5 07241023839 6 07241023940 6,5 07241024041 7 07241024142 8 07241024243 9 07241024344 10 07241024445 10,5 07241024546 11 07241024647 12 07241024748 13 072410248
EU UK 35 2,5 07243023536 3,5 07243023637 4,5 07243023738 5 07243023839 6 07243023940 6,5 07243024041 7 07243024142 8 07243024243 9 07243024344 10 07243024445 10,5 07243024546 11 07243024647 12 07243024748 13 072430248
EU UK 35 2,5 07245023536 3,5 07245023637 4,5 07245023738 5 07245023839 6 07245023940 6,5 07245024041 7 07245024142 8 07245024243 9 07245024344 10 07245024445 10,5 07245024546 11 07245024647 12 07245024748 13 072450248
7241B
7245B
7243B
Leather shoe, with penetration proof insole• Steel toe cap • Elastic steel penetration proof insole
Lace-up full-grain leather ankle shoe, waterproof, with quick opening system and front protection with strap closure• Steel toe cap • Elastic steel penetration proof insole
Leather ankle shoe, with penetration proof insole• Steel toe cap • Elastic steel penetration proof insole
Suede shoe, perforated• Steel toe cap • Elastic steel penetration proof insole
Safety footwear
59
EN 20345 S3 SRC
EN 20345 S1P SRC EN 20345 S3 RS HRO SRC
EN 20345 S3 SRC
7200BKK
7210BKK
7201BKK
7310BKK
EU UK 35 2,5 07200023536 3,5 07200023637 4,5 07200023738 5 07200023839 6 07200023940 6,5 07200024041 7 07200024142 8 07200024243 9 07200024344 10 07200024445 10,5 07200024546 11 07200024647 12 07200024748 13 072000248
EU UK 35 2,5 07201043536 3,5 07201043637 4,5 07201043738 5 07201043839 6 07201043940 6,5 07201044041 7 07201044142 8 07201044243 9 07201044344 10 07201044445 10,5 07201044546 11 07201044647 12 07201044748 13 072010448
EU UK 35 2,5 07210033536 3,5 07210033637 4,5 07210033738 5 07210033839 6 07210033940 6,5 07210034041 7 07210034142 8 07210034243 9 07210034344 10 07210034445 10,5 07210034546 11 07210034647 12 07210034748 13 072100348
EU UK 38 5 07310023839 6 07310023940 6,5 07310024041 7 07310024142 8 07310024243 9 07310024344 10 07310024445 10,5 07310024546 11 07310024647 12 073100247
Full-grain leather shoe, waterproof• Composite toe cap • Composite fibre penetration proof insole
Soft suede shoe, perforated• Composite toe cap • Composite fibre penetration proof insole
Full-grain leather ankle shoe, waterproof• Composite toe cap • Composite fibre penetration proof insole
Lace-up full-grain leather shoe, “welder” style, waterproof, with quick opening system and rubber outsole• Steel toe cap • Composite fibre penetration proof insole
Leather ankle shoe, with penetration proof insole• Steel toe cap • Elastic steel penetration proof insole
Safety footwear
60
7313KK
7314KK
EN 20345 S1P SRC
EN 20345 S1P SRC
EU UK 35 2,5 07313033536 3,5 07313033637 4,5 07313033738 5 07313033839 6 07313033940 6,5 07313034041 7 07313034142 8 07313034243 9 07313034344 10 07313034445 10,5 07313034546 11 07313034647 12 07313034748 13 073130348
EU UK 35 2,5 07314013536 3,5 07314013637 4,5 07314013738 5 07314013839 6 07314013940 6,5 07314014041 7 07314014142 8 07314014243 9 07314014344 10 07314014445 10,5 07314014546 11 07314014647 12 07314014748 13 073140148
7313KKC
EN 20345 S1P SRCEU UK 35 2,5 07313053536 3,5 07313053637 4,5 07313053738 5 07313053839 6 07313053940 6,5 07313054041 7 07313054142 8 07313054243 9 07313054344 10 07313054445 10,5 07313054546 11 07313054647 12 07313054748 13 073130548
7313KKB
EN 20345 S1P SRCEU UK 35 2,5 07313043536 3,5 07313043637 4,5 07313043738 5 07313043839 6 07313043940 6,5 07313044041 7 07313044142 8 07313044243 9 07313044344 10 07313044445 10,5 07313044546 11 07313044647 12 07313044748 13 073130448
“Light” suede shoe, with mesh insets and racing outsole• Composite toe cap • Composite fibre penetration proof insole
“Light” suede shoe, racing outsole• Composite toe cap • Composite fibre penetration proof insole
“Light” shoe, abrasion-proof, with carbon and mesh insets, racing outsole • Composite toe cap • Composite fibre penetration proof insole
“Light” suede shoe, with mesh insets and racing outsole• Composite toe cap • Composite fibre penetration proof insole
61
7367G
7368GKK
7368BKK
7368NKK
EN 20347 02 SRC
EU UK 38 5 07367003839 6 07367003940 6,5 07367004041 7 07367004142 8 07367004243 9 07367004344 10 07367004445 10,5 07367004546 11 07367004647 12 073670047
EN 20345 S3 SRC
EN 20345 S3 SRC EN 20345 S3 SRC
EU UK 38 5 07368013839 6 07368013940 6,5 07368014041 7 07368014142 8 07368014243 9 07368014344 10 07368014445 10,5 07368014546 11 07368014647 12 073680147
EU UK 38 5 07368023839 6 07368023940 6,5 07368024041 7 07368024142 8 07368024243 9 07368024344 10 07368024445 10,5 07368024546 11 07368024647 12 073680247
EU UK 38 5 07368003839 6 07368003940 6,5 07368004041 7 07368004142 8 07368004243 9 07368004344 10 07368004445 10,5 07368004546 11 07368004647 12 073680047
Ankle shoe made of “VINTAGE” leather, greased, waterproof, without toe cap and penetration proof insole• Without toe cap • Without penetration proof insole • Double laced
Ankle shoe made of “VINTAGE” leather, greased, waterproof• Aluminium toe cap with breathable membrane • Composite fibre penetration proof insole • Double laced
Ankle shoe made of “VINTAGE” leather, greased, waterproof• Aluminium toe cap with breathable membrane • Composite fibre penetration proof insole • Double laced
Ankle shoe made of “VINTAGE” leather, greased, waterproof• Aluminium toe cap with breathable membrane • Composite fibre penetration proof insole • Double laced
NEW ITEM
62
7344RP
7348RP
EU UK 38 5 07344013839 6 07344013940 6,5 07344014041 7 07344014142 8 07344014243 9 07344014344 10 07344014445 10,5 07344014546 11 07344014647 12 073440147
EU UK 38 5 07348013839 6 07348013940 6,5 07348014041 7 07348014142 8 07348014243 9 07348014344 10 07348014445 10,5 07348014546 11 07348014647 12 073480147
EN 20345 S3 HRO SRC
EN 20345 S1P HRO SRC
7347RP
EU UK 38 5 07347013839 6 07347013940 6,5 07347014041 7 07347014142 8 07347014243 9 07347014344 10 07347014445 10,5 07347014546 11 07347014647 12 073470147
EN 20345 S1P HRO SRC
7349RP
EU UK 38 5 07349013839 6 07349013940 6,5 07349014041 7 07349014142 8 07349014243 9 07349014344 10 07349014445 10,5 07349014546 11 07349014647 12 073490147
EN 20345 S3 HRO SRC
Shoe made of “VINTAGE” leather, greased, waterproof with rubber outsole and soft PU ring• Composite toe cap • Composite fibre penetration proof insole
Suede shoe with mesh inserts, rubber outsole and soft PU ring• Composite toe cap • Composite fibre penetration proof insole
Perforated suede shoe with rubber outsole and soft PU ring• Composite toe cap • Composite fibre penetration proof insole
Perforated suede shoe with rubber outsole and soft PU ring• Composite toe cap • Composite fibre penetration proof insole
NEW ITEM
LIGHT
LIGHT
LIGHT
LIGHT
63
7255NA
7294RK
EN 20345 S3 SRC
EN 20345 S3 HRO SRC
EU UK 38 5 07255013839 6 07255013940 6,5 07255014041 7 07255014142 8 07255014243 9 07255014344 10 07255014445 10,5 07255014546 11 07255014647 12 072550147
EU UK 39 6 07294033940 6,5 07294034041 7 07294034142 8 07294034243 9 07294034344 10 07294034445 10,5 07294034546 11 07294034647 12 072940347
7323KK
EN 20345 S3 SRCEU UK 35 2,5 07323013536 3,5 07323013637 4,5 07323013738 5 07323013839 6 07323013940 6,5 07323014041 7 07323014142 8 07323014243 9 07323014344 10 07323014445 10,5 07323014546 11 07323014647 12 07323014748 13 073230148
7294NKK
EN 20345 S3 HRO SRCEU UK 38 5 07294013839 6 07294013940 6,5 07294014041 7 07294014142 8 07294014243 9 07294014344 10 07294014445 10,5 07294014546 11 07294014647 12 07294014748 13 072940148
Suede ankle shoe, waterproof, with nylon insets• Composite toe cap• Composite fibre penetration proof insole
Greased Nubuck ankle shoe, waterproof• Steel toe cap • Composite fibre penetration proof insole
“Light” Nubuck ankle shoe, waterproof, racing outsole• Composite toe cap • Composite fibre penetration proof insole
Greased Nubuck ankle shoe, waterproof• Composite toe cap • Composite fibre penetration proof insole
Beta Utensili S.p.A.Via Volta 1820845 Sovico (MB) - ItalyTel 039.2077.1 Fax 039.2010742www.beta-tools.com [email protected]
9980
1490
8
The images are for reference only. Beta Utensili S.p.A. reserves the right to update and upgrade its product range without notice.Promotion valid until 29/11/2013, subject to availability.