Beare Human Health - Stylco€¦ · However, prior to selecting a respirator, users should consult...

©2020 All rights reserved, Eric Beare Associates LTD., Rank Sharp & Universal Exports retain all rights to this design, no unauthorized reproduction or copying is allowed without prior written consent.Due to continuous product development, design and specifications may be changed without prior notification.

Catalogue 2020Beare Human Health

About beare

Eric Beare Associates is a 65 year old Hong Kong based company specializing in China supply chain management, Beare has over 40 staff located China , with our decades of experience in product design and engineering, factory auditing, logistical support & most importantly product quality management, Beare is the go to company for quality and safety conscious buyers wishing to responsibly react to rapid market demand.

Our human health product range is specifically developed to address the urgent need for high quality, low cost and accessible personal protection products.

All our products are shipped directly from manufacturers after extensive product testing, safety certification verification and detailed product inspection.




Comparison of FFP2, KN95, and N95 and Other Filtering Facepiece

Respirator Classes


Respirator Classes

Description

Filtering facepiece respirators (FFR), which are sometimes called disposable respirators, are subject to various regulatory standards around the world. Thesestandards specify certain required physical properties and performance characteristics in order for respirators to claim compliance with the particularstandard. During pandemic or emergency situations, health authorities often reference these standards when making respirator recommendations, stating,for example, that certain populations should use an “N95, FFP2, or equivalent” respirator.

This document is only intended to help clarify some key similarities between such references, specifically to the following FFR performance standards:• N95 (United States NIOSH-42CFR84)• FFP2 (Europe EN 149-2001)• KN95 (China GB2626-2006)• P2 (Australia/New Zealand AS/NZA 1716:2012)• Korea 1st class (Korea KMOEL - 2017-64)• DS (Japan JMHLW-Notification 214, 2018)



Respirator Classes


As shown in the following summary table, respirators certified as meeting these standards can be expected to function very similarly to one another,based on the performance requirements stated in the standards and confirmed during conformity testing.One notable comparison point is the flow rates specified by these standards for the inhalation and exhalation resistance tests. Inhalation resistance testingflow rates range from 40 to 160L/min. Exhalation resistance testing flow rates range from 30 to 95 L/min. Some countries require testing to be performed atmultiple flow rates, others at only the high or low end of those ranges. Although this appears to suggest that the standards’ requirements for breathingresistance (also called “pressure drop”) differ from each other, it’s important to understand that pressure drop across any filter will naturally be higher athigher flow rates and lower at lower flow rates. Given typical pressure curves for respirator filters, the standards’ various pressure drop requirements areactually quite similar. This chart shows a representative filter pressure drop curve. If one filter is tested at a high flow rate, the pressure drop performance willbe relatively high. If that same filter is tested at a low flow rate, the pressure drop performance will be relatively low.

Based on this comparison, it is reasonable to consider China KN95, AS/NZP2, Korea 1st Class, and Japan DS FFRs as “equivalent” to US NIOSH N95and European FFP2 respirators, for filtering non-oil-based particles such asthose resulting from wildfires, PM 2.5 air pollution, volcanic eruptions, orbioaerosols (e.g. viruses). However, prior to selecting a respirator, usersshould consult their local respiratory protection regulations andrequirements or check with their local public health authorities forselection guidance.


Respirator Classes



Respirator Classes


Definitions

Filter performance – the filter is evaluated to measure the reduction in concentrations of specific aerosols in air that passesthrough the filter.

Test agent - the aerosol that is generated during the filter performance test.

Total inward leakage (TIL) – the amount of a specific aerosol that enters the tested respirator facepiece via both filter penetration and facesealleakage, while a wearer performs a series of exercises in a test chamber.

Inward leakage (IL)– the amount of a specific aerosol that enters the tested respirator facepiece, while a wearer performs a normal breathing for 3 minutes in a test chamber. The test aerosol size (count median diameter) is about 0.5 micro meter.

Pressure drop – the resistance air is subjected to as it moves through a medium, such as a respirator filter.



Beare Human Health Products

3-PLY Non-woven Disposable

Face Mask

BFFP1

• 100% new non-woven material with BPE 99% • Three layers, 25gsm PP+22gsm Filter paper + 25gsm PP• Unit size: 17.5 x 9.5cm• Color: Blue• Earloop style• CE FDA certificates • EN standard: 149:2001 + A1:2009


3-PLY Non-woven Disposable

Face Mask

BFFP1- A

• Disposable Medical Grade Mask • 100% new non-woven material with BFE 95% • 3 Protective layers• Color: White• Earloop style• CE certificates • FFP1 standard


KN95 CE FFP2 Protective

Face Mask

BKN95 - FFP2

• Protection level: Filtering efficiency up to 95%• Color: White• Style: Hanging ear type• Material: Cotton and non-woven fabric• The production of our masks strictly follows GB2626-2006 (China's

KN95 standard). The technical requirements and test methods ofGB2626-2006 (China's KN95 standard) .

• CE EN149:2001+A1:2009 NR• Activated carbon layer inside can effectively absorb organic smell

and odor.• High-quality elastic ear-loop with no pressures on the ears, which

makes it comfortable to wear for a long time.• Close fit to prevent polluted air from entering.• Nose sponge cushion, soft and flexible nose cushion makes mask

wearer feel more comfort.• Adjustable soft nose clip, fit the bridge of the nose, prevents fogging

of glasses block the haze from entering.• FFP2 standard


KN95 CE Protective

Face Mask

BKN95

• Protection level: Filtering efficiency up to 95%• Color: White• Style: Hanging ear type• Material: Cotton and non-woven fabric• The production of our masks strictly follows GB2626-2006 (China's

KN95 standard). The technical requirements and test methods ofGB2626-2006 (China's KN95 standard) .

• CE EN149:2001+A1:2009 NR• Activated carbon layer inside can effectively absorb organic smell

and odor.• High-quality elastic ear-loop with no pressures on the ears, which

makes it comfortable to wear for a long time.• Close fit to prevent polluted air from entering.• Nose sponge cushion, soft and flexible nose cushion makes mask

wearer feel more comfort.• Adjustable soft nose clip, fit the bridge of the nose, prevents fogging

of glasses block the haze from entering.


Nitrile Examination

Gloves

• Disposable nitrile examination gloves• Color: Blue• Latex free• Powder free• Non sterile• For mute-propose• Size: S / M / L


Digital Non-contact Infrared

Thermometer

BCKT1

• Non-contact measuring• Fast and easy • One key measuring• 1s measuring time• LCD display and fever alarm• Measuring range (Body temperature mode) 32℃-42℃(89-107℉

(The measurement deviation is ≤ ± 0.3 degrees)


Digital Non-contact Infrared

Thermometer

BCKT2

• Non-contact measuring 3-5cm• Compact and light weight• Accurate reading• Fast and easy • LCD display and fever alarm• Power: DC 3V; 2 × AAA batteries (Not included)• Auto shut-off: 15 Seconds• Measuring range: Body mode: 32℃~42.5℃ (89.6°F~108.5°F• Surface mode: 0℃~100℃ (32°F~212°F）• Accuracy: 32℃~34.9℃: ±0.3℃ (89.6°F~94.82°F:±0.54°F)• 35℃~42℃: ±0.2℃(95°F~107.6°F:±0.36°F)• 42.1℃~42.5℃: ±0.3℃ (107.78°F~108.5°F:±0.54°F)• Resolution: ±0.1℃（32.18°F)• Measuring time: 0.5s• Measuring distance: 3-5cm• Memories: 32• Product dimension: 190 x 40 x 40 mm• Product weight: 67g (Battery not included)


Medical Grade Infrared

Thermometer

BCKT3

• Non-contact measuring 5 – 15cm• Fast and easy • One key measuring• Smart detector 0.5s measuring time• Ergonomic handle design• LCD display and fever alarm• Transport & storage: temperature-20℃-55℃ relative temperature• Atmospheric pressure: 70kpa-106kpa • Indicating unit resolution: 0.1℃• Accuracy (Body temperature mode): 35.0℃-42.0℃ within range ±0.2℃

: 35.0℃-42.0℃ out of range ±0.3℃• Measuring range (Body temperature mode) 32.0℃-42.9℃• Operating temperature: 0℃-40℃• Operating humidity: ≤80%• Power supply: DC9V battery• Automatic power Off: 90Sec• Product dimension: 100 x 46 x 160 mm• Product weight: 125g (Battery not included)• CE RSHO ISO: 13485: 2016


Digital Clinical

Thermometer

BCT1

• Clinical thermometer with contact-measurement technology：

Rectal Thermometer ，Armpit Thermometer and Oral Thermometers • Fast readout• Memory recall• Fever alarm• Measurement Range: 32.0℃-42.9℃ (89.6℉-109.2℉) • Low Temperature Display: Temperature <32.0℃(89.6℉), display: Lo℃/℉• High Temperature Display: Temperature≧43℃(109.4℉), display: Hi℃/℉• Display Definition: 0.1℃/℉• Accuracy: ±0.1℃ (±0.2℉) range of measurement:

35.0℃-39.0℃ (95.0℉-102℉), Other range: ±0.2℃(±0.4℉)

• Fever Beeper Sound: ≧37.8℃ (100.0℉) • 30 short beep sounds in 10 seconds • Normal Beeper Sound: <37.8℃ (100.0℉) • 10 long beep sounds in 10 seconds • Auto Power Off: 8 minutes ±2 minutes • Battery Type : LR41 or SR41 (Included Battery) • Operating Condition: Temperature:10℃-35℃(50℉-95℉), • Humidity:30%-85% RH • CE Certificate


Medical Isolation Mask

Face Shield

MIM1

• Anti-impact• Anti-spatter• Light weight• High light penetration* Head straps with black and white color options

• Overall ergonomic design, lightweight and more comfortable to wear.• Made of polymer materials to effectively prevent foreign body impact

and liquid spatter.• The lenses are made of high-quality PET and high-transparent material with

high clarity.• Various optional models, and easy to adjust the head band, suitable for

all kinds of head size.

Product performance features1. Protective masks are made of polymer materials, lightweight and have a

certain protective function, which can be used for many scenes, such aslaboratory, hospital, outdoor etc. Can effectively prevent dust impact,liquid spatter or splash.

2. The lenses are made of high quality PET and high light transmittancematerial, transparent and clear enough to ensure that they do not affectthe normal vision of the human body and can wear together with theglasses.


Scope of applicationUsed in medical institutions examination and treatment to protect body fluids,blood spatter, or spatter.

Product usage1. Open the package and remove the product.2. Place the medical isolation mask around the face of the glasses and pull the

webbing towards the back of the brain in the right position for the head.3. Try not to touch the center of the lens once usage.4. Disposed of in categories of medical waste after use.

• Size: S / M / L

Safety Protective

Eyewear

EBG2

• Safety eyewear• Anti-fog lenses• Medical grade• Wide field of view, 180 degree view, clear transparency• Effectively prevents saliva droplets & chemical splash• For best results use In conjunction with Beare face shield• Product size: 17x7x4.5cm• Product weight: 45g


Sterilized Medical

Protective Clothing with shoe cover

BMPC 1

• Suitable for medical personnel with shoe cover• Disposable • Breathable, soft and comfortable• Function: Dustproof, waterproof, anti-epidemic barrier• Color: White (with blue seam sealing tape)• Elastic band: For shrink cuffs, leg, waist and cap

Size:• M 125CM <55KG 150-165CM• L 130CM <65KG 165-170CM• XL 135CM <75KG 170-175CM• XXL 140CM <85KG 175-180CM• XXXL 150CM<95KG 180-185CM• XXXXL 160CM<105KG 185-190CM

Certificates and Standards• CE certificat• TYPE3• TYPE4• TYPE5• EN14126• FDA

©2020 All rights reserved, Eric Beare Associates LTD., Rank Sharp & Universal Exports retain all rights to this design, no unauthorized reproduction or copying is allowed without prior written consent.Due to continuous product development, design and specifications may be changed without prior notification. Front Back

Sterilized Medical

Protective Clothing

BMPC 2

• Suitable for medical personnel• Disposable • Breathable, soft and comfortable• Function: Dustproof, waterproof, anti-epidemic barrier• Color: White (with blue seam sealing tape)• Elastic band: For shrink cuffs, leg, waist and cap




Front Back

Medical

Protective Clothing

BMPC 3

• For medical personnel• Disposable • Breathable, soft and comfortable• Function: Dustproof, waterproof• Color: White • Elastic band: For shrink cuffs, leg, waist and cap




Front Back


Thanks for your timeBeare Human Health

Beare Human Health - Stylco€¦ · However, prior to selecting a respirator, users should consult...

Documents

Transcript of Beare Human Health - Stylco€¦ · However, prior to selecting a respirator, users should consult...