Barcode Scanner Quick Start Guide

8/2/2019 Barcode Scanner Quick Start Guide

1/20

4600g, 4600r, 4600rp, 4800i

Quick Start Guide


2/20

1

Note: Refer to your users guide for information about cleaning your device.

For localized language versions of this document,go to www.honeywell.com/aidc.

Getting Started

Turn off computers power before connecting thescanner, then power up the computer once thescanner is fully connected.

USB Connection
http://www.honeywell.com/aidchttp://www.honeywell.com/aidc


3/20

2

Keyboard Wedge Connection

Serial (RS-232) Connection


4/20

3

Reading Techniques

The view finderprojects an aimingbeam that shouldbe centered overthe barcode, butcan be positionedin any direction for

a good read.Hold the scannerover the barcode,pull the trigger, and center the aiming beam on thebarcode.The aiming beam is smaller when the scanner is

closer to the code and larger when it is farther fromthe code. Hold the scanner close to smallerbarcodes, and farther away from large barcodes toget a proper read.If the barcode is highly reflective (e.g., laminated),you may need to tilt the scanner at an angle so thebarcode can be scanned.

Standard Product Defaults

The following barcode resets all standard productdefault settings.

Standard Product Defaults


5/20

4

Interface

Scan the barcode that describes the PC or interfaceyou are using.

AT/PS2 Keyboard Wedge(Default)

RS-232

USB Keyboard (PC)

Emulate External Keyboard

Japan DOS/V

USB Japanese Keyboard (PC)


6/20

5

Keyboard Country

Scan the Program Keyboard Country barcodebelow, t hen scan the numeric barcode(s) frompage 10 , then the Save barcode to program thekeyboard for your country. As a general rule, thefollowing characters are not supported by thescanner for countries other than the United States: @ | $ # { } [ ] = / \ < > ~.

Note: For a complete list of country codes, see the Users Guide for your prod uct at our website,www.honeywell.com/aidc.

Country Code Scan Country Code Scan

Belgium 1 Italy 5Denmark 8 Norway 9Finland 2 Spain 10France 3 Switzerland 6Germany/Austria 4 USA (Default) 0

Great Britain 7

Program Keyboard Country

Save
http://www.honeywell.com/aidchttp://www.honeywell.com/aidchttp://www.honeywell.com/aidc


7/20

6

Trigger

The following barcodes will allow you to use thereader in Manual Trigger mode (need to press thetrigger to read) or Presentation mode (the reader isactivated when it sees a barcode).

Streaming Presentation

Note: Streaming Presentation Mode applies only to units with the Advanced Illumination feature. Units with the advanced illumination feature have a software revision of 31205480-118 or newer.

When in Streaming Presentation mode, the imagerleaves the scan illumination on all the time andcontinuously searches for barcodes.

Manual Trigger(Default)

Presentation Mode

Streaming Presentation Mode


8/20

7

Reread Delay

This sets the time period before the scanner canread the same barcode a second time. Setting areread delay protects against accidental rereads ofthe same barcode.

Suffix

If you want a carriage return after the barcode, scanthe Add CR Suffix barcode . To add a tab after thebarcode, scan the Add Tab Suffix barcode.

Otherwise, scan the Remove Suffix barcode toremove the suffixes.

Medium Reread Delay

Add CR Suffix

Remove Suffix

Add Tab Suffix


9/20

8

Add Code ID Prefix to all Symbologies

Scan the following barcode if you wish to add aCode ID prefix to all symbologies at once.

Note: For a complete list of Code IDs, see the Users Guide for your product at our website,www.honeywell.com/aidc.

Function Code Transmit

When this selection is enabled and function codesare contained within the scanned data, the imagertransmits the function code to the terminal. Chartsof these function codes are provided in your UsersGuide. When the imager is in keyboard wedgemode, the scan code is converted to a key codebefore it is transmitted.

Add Code ID Prefix To All Symbologies(Temporary)

Enable(Default)

Disable
http://www.honeywell.com/aidchttp://www.honeywell.com/aidchttp://www.honeywell.com/aidc


10/20


11/20


12/20


13/20


14/20


15/20

14

North AmericaTelephone: (800) 782-4263 Fax: (803) 835-8012 E-mail: [email protected] Latin AmericaTelephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: (239) 263-9689 E-mail: [email protected] BrazilTelephone: +55 (21) 3535-9100 Fax: +55 (21) 3535-9105 E-mail: [email protected] MexicoTelephone: +52 (55) 5203-2100 Fax: +52 (55) 5531-3672 E-mail: [email protected] Europe, Middle East, and AfricaTelephone: +31 (0) 40 2901 633 Fax: +31 (0) 40 2901 631 E-mail: [email protected] Asia PacificTelephone: +852-2511-3050Fax: +852-2511-3557 E-mail: [email protected] JapanTelephone: +813-5770-6312Fax: +813-5770-6313E-mail: [email protected]


16/20


17/20


18/20

17

HONEYWELLS RESPONSIBILITY AND PURCHASERSEXCLUSIVE REMEDY UNDER THIS WARRANTY ISLIMITED TO THE REPAIR OR REPLACEMENT OF THEDEFECTIVE PRODUCT WITH NEW OR REFURBISHEDPARTS. IN NO EVENT SHALL HONEYWELL BE LIABLEFOR INDIRECT, INCIDENTAL, OR CONSEQUENTIALDAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITYOF HONEYWELL ARISING IN CONNECTION WITHANY PRODUCT SOLD HEREUNDER (WHETHER SUCHLIABILITY ARISES FROM A CLAIM BASED ONCONTRACT, WARRANTY, TORT, OR OTHERWISE)EXCEED THE ACTUAL AMOUNT PAID TOHONEYWELL FOR THE PRODUCT. THESELIMITATIONS ON LIABILITY SHALL REMAIN IN FULLFORCE AND EFFECT EVEN WHEN HONEYWELL MAYHAVE BEEN ADVISED OF THE POSSIBILITY OF SUCHINJURIES, LOSSES, OR DAMAGES. SOME STATES,PROVINCES, OR COUNTRIES DO NOT ALLOW THEEXCLUSION OR LIMITATIONS OF INCIDENTAL ORCONSEQUENTIAL DAMAGES, SO THE ABOVELIMITATION OR EXCLUSION MAY NOT APPLY TOYOU.

All provisions of this Limited Warranty are separate andseverable, which means that if any provision is held invalidand unenforceable, such determination shall not affect thevalidity of enforceability of the other provisions hereof.Use of any peripherals not manufactured/sold byHoneywell may result in damage not covered by thiswarranty. This includes but is not limited to: cables, powersupplies, cradles, and docking stations. HoneywellInternational Inc. extends these warranties only to the firstend-users of the products. These warranties are non-transferable.

The duration of the limited warranty for the 4600g, 4600r,4600rp, and 4800i is for five (5) years.


19/20


20/20

Honeywell700 Visions DriveP.O. Box 208Skaneateles Falls, NY 13153-0208

2D-02-QS Rev D

Barcode Scanner Quick Start Guide

Documents

Transcript of Barcode Scanner Quick Start Guide