banlaw REFUEllInG nOZZlES - Hyden Eng
8
banlaw.com BANLAW REFUELLING NOZZLES banlaw.com Pioneers of Unified Fuel Management The World’s Toughest and Safest Nozzles. Our nozzles perform in some of the harshest working conditions in the world. You can depend on Banlaw nozzles to do the job.
Transcript of banlaw REFUEllInG nOZZlES - Hyden Eng
banlaw.com
Pioneers ofUni�ed Fuel
Management
banlawREFUEllInG nOZZlES
banlaw.com
Pioneers ofUni�ed Fuel
Management
The World’s Toughest and Safest Nozzles.Our nozzles perform in some of the harshest working conditions in the world. You can depend on Banlaw nozzles to do the job.
i
banlaw.com
Pioneers ofUni�ed Fuel
Management
REFUEllInG nOZZlES
Banlaw nozzles have a proven safety record as our dependable ball locking mechanism ensures the nozzle cannot ‘fly off’, minimising risk to the refuelling operator. All Banlaw nozzles are designed with the operator of the field task in mind. Our products are easy to carry and manoeuvre, yet they are robust and reliable.
When refuelling at ground level, an automatic cut-off means the Banlaw nozzle is easier to use and the refuelling operators don’t risk climbing onto vehicles, thus reducing the chance of worker injury.
The Banlaw Dry Break Automatic cut-off system reduces the risk of fuel spills during the refuel process.
THE WORLD’S TOUGHEST AND SAFEST NOZZLES
This results in a refuelling area free from fuel-related safety slip hazards. Including loading arms, nozzle holsters and nozzle anchors also eliminates trip hazards from ground-stored hoses.
With a 2” bore, Banlaw nozzles have the highest industry flow rates capability, reducing refuelling times. The choice of 5 shut-off pressure settings allows for faster refuelling times and flexible solutions to the most complex refuelling problems.
The Banlaw nozzle is repairable, not disposable.
banlaw.com
Pioneers ofUni�ed Fuel
Management
i
MInInG• Flowrate range for Diesel:
90-800 LPM / 24-211GPM
• Mass (with plug): 3.4kg (7.5lbs)
Products Required
• Mining BNM800 Nozzle
• AUS25A Filter Vent with AUS25AA-1 coupling
• BRM23 Receiver
BNM800
1000lPM• Flowrate range for Diesel:
400-1000 LPM / 106-264 GPM
• Mass (with plug): 4.3kg (9.5lbs)
Products Required
• BN1000 Nozzle
• AUS25A Filter Vents with AUS25AA-1 Coupling
• 2 Vents Required
• BRM43 Receiver
BN1000
1
UnDERGROUnD• Flowrate range for Diesel:
40-300LPM / 24-211GPM
• Mass (with plug): 3.4kg (7.5lbs)
AUS45
Products Required
• Underground AUS45 Nozzle
• AUS25E-C Vent with AUS25AA-1 Coupling
• AUS46 Receiver
RaIl• Flowrate range for Diesel:
90-800 LPM / 24-211GPM
• Mass (with plug): 3.4kg (7.5lbs)
BNR800
Products Required
• Rail BNR800 Nozzle
• AUS25R Filter Vent with AUS25AA-1 Coupling
• AUS23R Receiver
2
aCCESSORIES
High quality accessories to ensure you get the best from your refuelling system.
Banlaw’s receivers, swivels, valves and nozzle anchors are made from the highest quality materials like stainless steel, zinc plated steel and anodized aluminium to ensure they withstand harsh everyday treatment.
Caps provide protection when the nozzle and receiver are not connected, reducing contamination. Made from aluminium or plastic, they are light and durable.
Prolong the life of your equipment by only using Banlaw accessories.
ONLY SETTLE FOR THE BEST QUALITY
AUS4W-50 Breakaway
Valve
AUS23C-R Cap
AUS43C Cap
AUS23C Cap
800 Anchor BP800049
1000 Anchor
AUS22049
Zinc Plated Steel Swivels (various sizes)
AUS24A AUS23- SOCKET
Anodized Aluminium
Swivels (various sizes)
Loading Arm
BFTNH203A
& BFTNH201A
Nozzle Holster
3
BPJN800M
BPM1000M
445
445
BPJN800M
BPM1000M
445
445
LEGENDL (Light), ML (Medium/Light), MH (Medium/Heavy), H (Heavy)
HEaD Loss curvEShow pressure drop across nozzle and Banlaw Receiver when used with diesel.
sEttiNG curvEsAutomatic shut-off of nozzle is initiated by a limited static pressure measured at the 2” nozzle inlet. Nozzle spring setting is determined by flow rate and head pressure of refuelling application. Actual inlet static pressure must be less than that shown for spring setting.
rEcommENDED coNDitioNsMaximum Static Head Pressure: 2.5MPa (363 psi)
FLowratE raNGE DiEsEL1000 Nozzle 400-1000lpm. (106-264 gpm) 800 Nozzle 90-800lpm. (45-211 gpm)
sPriNG sEttiNGsL, ML and M spring P/N. BP800029 MH and H sping P/N. BP800027 Nozzle setting denoted by letters L, M, etc. after nozzle model No. e.G. PM800M, BN1000ML.
PHYsicaL ProPErtiEsMass (with plug) 1000 Series Nozzle 4.3kgs (9.5lbs) 800 Series Nozzle 3.4kgs (7.5lbs)
coNstituENt matEriaLsAluminium, zinc plated mild steel, stainless steel, polyurethane, VITON seals.
FlOw TEST DaTa
4
banlaw.com
Pioneers ofUni�ed Fuel
Management
CARRYHANDLE
TRIGGER
OPERATINGHANDLE
ACTUATOR
ON
OFFOFF
STEP 44.1 ENSURE OPERATING HANDLE IS LOCKED IN THE OFF POSITION.4.2 RETRACT ACTUATOR ANDREMOVER NOZZLE FROM RECEIVER.4.3 RETURN NOZZLE TO ANCHOR ORREPLACE NOZZLE PLUG.4.4 REPLACE RECEIVER CAP.
PROMPTLY REPORT ANY PROBLEMS TO YOUR SUPERVISORS
STEP 11.1 REMOVE RECEIVER CAP.1.2 REMOVE NOZZLE FROM ANCHOR ORPLUG FROM FRONT OF NOZZLE.1.3 ENSURE MATING SURFACES OF RECEIVER AND NOZZLE ARE CLEAN AND UNDAMAGED.
STEP 22.1 ENSURE OPERATING HANDLE IS LOCKED IN THE OFF POSITION.2.2 RETRACT ACTUATOR AND PUSH NOZZLE FIRMLY ONTO THE RECEIVER.2.3 RELEASE ACTUATOR AND PUSH NOZZLE FIRMLY ONTO RECEIVER.2.4 REPEAT STEPS 2.2 AND 2.3 UNTILNOZZLE IS SECURELY CONNECTED.
STEP 33.1 RELEASE CATCH USING TRIGGERAND ROTATE HANDLE INTO ON POSITION.3.2 NOZZLE WILL AUTOMATICALLY TURNOFF AFTER TANK VENT HAS CLOSED.3.3 DO NOT MANUALLY HOLD NOZZLE IN THE ON POSITION DURING REFUELLINGOR AFTER TANK VENT HAS CLOSED.
REFUELLING NOZZLEINSTRUCTIONS
banlaw.com
Pioneers ofUni�ed Fuel
Management
HEAD OFFICE – SALES AND MANUFACTURING FACILITY* Phone: +61 2 4922 6300 Fax: +61 2 4920 6171 Email: [email protected]
25 Metro Court Gateshead, NSW 2290 Australia
WESTERN AUSTRALIA
Phone: +61 8 9209 1351 Fax: +61 2 4920 6171 Email: [email protected]
28 Milly Court Malaga, WA 6090 Australia
9/9 Murrena St Wedgefield WA 6721 Australia
16/46 Great Eastern Highway Kalgoorlie WA 6430 Australia
QUEENSLAND
Phone: +61 7 4800 4949 Email: [email protected]
UNITED STATES Phone: +1 (775) 340 6414 Fax: +1 (775) 754 2805 Email: [email protected]
3025 Griffin Street Carlin, Nevada 89822 United States of America
FOR A LIST OF BANLAW’S
GLobaL Distributors aND PartNErs
VISIT OUR WEBSITE AT
WWW.BANLAW.COM
COnTaCT US TODaY
banlaw.com
Pioneers ofUni�ed Fuel
Management
ABN: 88 062 044 071
Quality ISO 9001
*
