Axor Manufaktur - Hansgrohe · In the Axor Manufaktur we individualize and perfect our products...

Axor - Headquarters: Hansgrohe SE · P.O. Box 1145 · D-77757 SchiltachTel. +49 7836 51-0 · Fax +49 7836 51-1300 · [email protected] · www.hansgrohe.com

Hansgrohe NV/SA · Riverside Business Park · Blvd Internationalelaan 55K · B-1070 AnderlechtTel. +32 2 543 01 40 · Fax: +32 2 537 94 86 · [email protected] · pro.hansgrohe.be

Axo

r M

anuf

aktu

r Sp

ecia

l Fin

ish

Prog

ram

Axor Manufaktur Special Finish Program

Def-Farde-Manufaktur-Belgique.indd 4 7/08/14 15:26

Exception List

Special Finish Program 20142

In the Axor Manufaktur we individualize and perfect our products with care and attention to detail.Next to the standard chrome finish, twelve additional bespoke finishes are now available in polished and brushed varieties.In addition, a large variety of special colored finishes are available on request. Beyond this, personalized solutions are reviewed and produced on an individual case basis.

The new special finishes, cover the majority of currently requested finishes.

For all of our standardized special finishes, we´ve checked> the feasibility of production> the delivery times > and the prices.

All of our products are available in the new special finishes.

Exception ListDue to material issues, product sizes and geometrics, some products cannot be coated.For detailed information, please check the exception list on the following pages.

Standardized special finishes

Axor Manufaktur

brushed black chrome- 340

polished black chrome- 330

brushed chrome- 260

polished PVD chrome- 020

brushed nickel- 820

polished nickel- 830

brushed bronze- 140

polished bronze- 130

polished red gold- 300

brushed red gold- 310

polished gold optic- 990

brushed gold optic- 250

Special Finish Program 2014 3

General information

Manufacturing Process PVD – Physical Vapor Deposition Basis for each PVD surface is a galvanically generated chrome surface.In the middle of the chamber there is the target consisting of circon. During the coating process the chamber is filled up with nitrogen. Depending on the amount of nitrogen the most diverse surfaces can be generated. During the process an electric arc is going up and down the target. Due to the high heat build-up the circon evaporates. This steam, which merges with the nitrogen in the chamber, lies down on the different fitting parts.Circon-nitrite is an extremely tough substance. That is the reason why the sur-face is more resistant in comparison with galvanic surfaces.

PVD advantagesAll finishes are manufactured with the PVD technology in our own production. Advantages: > Better scratch resistance > Long-lasting brilliance of the surface > Higher detergent resistance > Higher corrosion resistance > Various surface colors realizable > Ecologically friendly process (no wastewater)

PVD treated products are especially precious and of the highest quality. They are particularly suited for public projects, such as hotels, for ex-ample.


Price calculation

*exception list see from page 6.Due to material, product size and geometric, some products can not be coated.For detailed information, please check the exception list on the following pages.

All Axor Products*

list price + 50 %

Delivery time: 6 weeks

polished gold optic

polished red gold

polished bronze

polished nickel

polished PVD chrome

polished black chrome

brushed gold optic

brushed red gold

brushed bronze

brushed nickel

brushed chrome

brushed black chrome

12


Exception list

Axor Starck 6Axor Starck X 6Axor Urquiola 6Axor Citterio 7Axor Massaud 8 Axor Bouroullec 10Axor Montreux 14Axor Steel 14Axor ShowerCollection 15Cross-collection products 16

Due to material, product size and geometric, some products can not be coated.For detailed information, please check the exception list on the following pages.


Axor Starck Towel ring

40821000

Axor StarckMirror with lamp

40141000

Axor StarckSingle lever kitchen mixer Semi-Pro

40141000

Exception List

Axor Starck XWaterwall

10920000 > It is not possible to coat the panel. Faucets, head and side showers are possible

Axor Starck

Axor Starck X

Axor Urquiola

Possible finishes: brushed gold optic, polished gold optic, brushed redgold, polished redgold, brushed bronze, polished bronze, brushed nickel, polished nickel, brushed chrome, polished PVD chrome> All faucets of Axor Urquiola are not possible in polished and brushed black chrome!

> For all brushed finishes: inside of the handle can not be brushed, remain polished.


Exception List

Axor UrquiolaWashbowl 625 x 408 mm

Axor UrquiolaWashbowl 511 mm (not shown)

Axor UrquiolaWashbasin 625 x 399 mm wall-mounted (not shown)

11300000

11301000

11302000

Axor UrquiolaBath tub 1,800 mm

11440000

Axor UrquiolaHeater wall-mounted

Axor UrquiolaPartition heater with „Clouds“ pattern free-standing

Axor UrquiolaPartition heater with „Clouds“ pattern free-standing

42501000

42500000

42505000

Axor Citterio

Axor UrquiolaPartition heater with mirror and „Clouds“ pattern free-standing

Axor UrquiolaPartition with mirror and „Clouds“ pattern free-standing

Axor UrquiolaSwivel mirror for heater/ partition/ partiti-on heater

42510000

42511000

42513000

Axor CitterioSingle lever basin mixer with high spout without waste set

39037000 > Not possible in polished black chrome / brushed black chrome.

Axor CitterioSingle lever basin mixer with high spout and waste set wall mounted

39034000 > Not possible in polished black chrome / brushed black chrome.


Axor Citterio bath tub

39957000

Axor CitterioSingle lever kitchen mixer Semi-Pro

39840000 > spring and hose can not be coated, rest is possible

Exception List

Axor Massaud Mirror

42240000

Axor MassaudBuilt-in washbasin with 1-boreholingAxor MassaudBuilt-in washbasin with 3-boreholingsAxor MassaudWashbowl 800 mmAxor MassaudWashbowl 600 mm

42310000

42313000

42300000

42305000

Axor MassaudBath tub 1,90 mm

18950000

Axor MassaudToothbrush tumbler

42234000

Axor Massaud


Exception List

Axor MassaudSoap dish

42233000

Axor MassaudToilet brush holder free-standing

42235000 > holder can not be coated (porcelain)

Axor MassaudCosmetics box

42272000

Axor MassaudVase

42274000

Axor MassaudCandle holder

42271000


Exception List

Axor Bouroullec 2-Handle basin mixer for concealed installation and valves for mounting on basin with short spout

Axor Bouroullec 2-Handle basin mixer with wall spout 245mm, for concealed installation and valves for mounting on basin/ console(not shown)

19139000

19140000

> not possible in polished black chrome and brushed black chrome

Axor Bouroullec

Axor BouroullecSingle lever basin mixer for concealed installation with short spout

Axor BouroullecSingle lever basin mixer for concealed installation with wall mounting with long spout (not shown)

19125000

19127000


Axor Bouroullec3-Hole basin mixer for concealed installation with short spout

Axor Bouroullec3-Hole basin mixer for concealed installation with long spout(not shown)

19135000

19136000


Axor Bouroullec3-Hole Basin Mixer for concealed instal-lation and wall mounting with spout 245mm, with lever handles, DN15

19158000 > not possible in polished black chrome and brushed black chrome

Axor BouroullecShort bath spout

19415000 > not possible in polished black chrome and brushed black chrome

Axor Bouroullec Single lever basin mixer with short wall spout for concealed installation and handle

Axor Bouroullec Single lever basin mixer with long wall spout for concealed installation and handle

19137000

19138000



Exception List

Axor BouroullecShelf 400 mm wall-mounted

42670400 > Shelf can not be coated.> Metal parts are possible.

Axor BouroullecThermostatic bath mixer for exposed installation

19741400 > Shelf can not be coated.> Fittings, hose and hand shower are possible.

Axor BouroullecThermostatic shower mixer for exposed installation

19761400 > Shelf can not be coated.> Fittings, hose and hand shower are possible.

Axor BouroullecAxor Starck Soap dish


Axor BouroullecShelf 250 mm wall-mounted


Axor BouroullecShelf 250 mm free-standing

42673000


Exception List

Axor BouroullecMirror large wall-mounted

42685000

Axor BouroullecMirror small wall-mounted

42681000

Axor BouroullecRoll holder


Axor StarckToilet brush holder free-standing

42635400 > holder can not be coated (porcelain)

Axor BouroullecToothbrush tumbler

42634000


Exception List

Axor BouroullecWashbasin furniture wall-mounted

Axor BouroullecWashbasin furniture wall-mounted with cut-out for built-in washbasin no. 19943000

19926000

19928000

Axor BouroullecBuilt-in bath tub

19955000

Axor BouroullecBuilt-in washbasin 866 x 530 mm with 2 shelves

Axor BouroullecBuilt-in washbasin 666 x 480 mm with 2 shelves (not shown)

Axor BouroullecWashbasin 666 x 503 mm with 2 shelves (not shown)

Axor BouroullecWashbasin 666 x 503 mm with 2 shelves (not shown)

Axor BouroullecBuilt-in washbasin 866 x 466 mm with1shelf (not shown)

Axor BouroullecWashbasin 866 x 503 mm with 1 shelf (not shown)

Axor BouroullecBuilt-in washbasin 595 x 480 mm with 1 shelf (not shown)

Axor BouroullecWashbasin 595 x 503 mm with 1 shelf (not shown)

19943000

19944000

19941000

19942000

19945000

19946000

19947000

19948000


Exception List

Axor Montreux2-handle bath and shower mixer

16540000 > Metal hose can not be coated.> Adaption with an Isiflex shower hose possible.

Axor Montreux2-handle rim-mounted bath and shower mixer


Axor MontreuxFloor standing single lever bath and sho-wer mixer


Axor Montreux

Axor SteelAxor SteelSingle lever basin mixer with pop-up waste set

35002800 > can not be coated.Material: Stainless steel

Axor SteelSingle lever basin mixer for concealed installation with spout 161 mm and escut-cheons wall-mounted


Axor SteelSingle lever basin mixer for concealed installation with spout 221 mm and escut-cheons wall-mounted



Exception ListException List

Roll Holder 41838800 > can not be coated.Material: Stainless steel

Toilet brush holder wall-mounted 41835800 > can not be coated.Material: Stainless steel

Single Hook 41881800

Axor Shower Collection

Axor ShowerCollectionShowerHeaven 970 x 970 mm 3jet over-head shower with lighting

10623800 > can not be coated.Material: Stainless steel> Possible finish: brushed stainless steel

Axor ShowerCollectionShowerHeaven 720 x 720 mm 3jet over-head shower with lighting


> can not be coated.Material: Stainless steel

Axor ShowerCollectionShowerHeaven 720 x 720 mm 3jet over-head shower without lighting



Exception List

Cross-Collection products

Raindance Royale S 350 Air 1jet plate overhead shower

28420000

Sensoflex metal shower hose 1,25 m 28132000



Metal effect shower hose 1.25 m 28112000 (chrom)28112820 (brushed nickel)

Axor ShowerCollectionShowerHeaven 970 x 970 mm 3jet over-head shower without lighting



Exception ListException List

Metal effect shower hose 1.60 m 28116000 (chrom)28116820(brushed nickel)

Metal effect shower hose 2.00 m 28120000 (chrom)28120820 (brushed nickel)

Cover 13950000 > not possible in polished black chrome and brushed black chrome

Angle valve with microfilter 13904000

Angle valve with cover 13954000 > Valve can not be coated.> Cover not possible in polished black chrome und brushed black chrome


I. Area of Application As far as not explicitly specified otherwise in writing, these sales terms and delivery conditions of Hansgrohe SE apply for all quotations, sales agree-ments, orders and deliveries which Hansgrohe executes for purchasers. They also apply for future business relationships, even if not again explicit-ly agreed to. Any deviating general terms and conditions of the purchaser will not be accepted even if they were not explicitly objected against.

II. Contract conclusion1. Quotations from Hansgrohe are subject to change if they were not expressly specified as binding in the quotation text. The contract has only been concluded once Hansgrohe confirms the order in writing to the purchaser.2. Hansgrohe will only grant warranty if this has been expressly agreed to in the order confirmation or in advertising messages. 3. Documentation which was handed over by Hansgrohe during the contract initiation, such as images and drawings, and technical statements which were made by Hansgrohe are decisive; any technical changes or technical improvements or construction changes are authorized if they are reasonable for the purchaser.

III. Scope of Delivery, Transportation and Passing of Risk1. Delivery ex works is agreed to in principle. The risk passes to the purchaser at the latest with the shipment of the delivery item from the plant or shipping point. If the shipping is postponed due to the purchaser’s behaviour or due to a circumstance outside of Hansgrohe’s control, the risk passes to the purchaser with the notification of readiness for despatch. 2. Unless agreed to otherwise, the purchaser must conclude a transportation insurance at its costs on the basis of the general transportation insurance conditions which covers the risk of transports of the goods which are included in the contract from the shipping point to the agreed destination point.3. In the case of agreement of commercial terms, Incoterms apply in their respective valid version. The scope of the delivery is specified in the order confirmation.

IV. Delivery Term and Force Majeure1. Delivery terms which are not expressly specified as binding are non-binding. Delivery terms start at the earliest once all documentation which is required for the content determination of the order has been received if the purchaser must obtain these documents according to the contract, and upon receipt of the down- payment. A delivery term is considered as being kept if the shipment has been sent or if readiness of the delivery has been notified within the term.2. Delivery terms extend by the duration of the business disruption if circumstances occur which are not the responsibility of Hansgrohe and which significantly influence the manufacturing or delivery of the object, especially in the case of labour disputes and other circumstances which affect Hansgrohe or sub-suppliers (business disruption without own fault). If a required adjustment of the contract due to business disruption without own fault is not possible, Hansgrohe shall be relieved of its performance obligation.3. If the delivery term is extended due to the aforementioned circumstances or if Hansgrohe is relieved from its delivery obligation, the purchaser is not entitled to any liability claims against Hansgrohe. Hansgrohe is also not liable for any business disruptions without fault if they occur during the delay. Hansgrohe is obligated to inform the purchaser of the occurrence of any of the aforementioned circumstances.4. Hansgrohe is entitled to issue partial deliveries and invoices prior to the end of the delivery term and to a reasonable extent.5. If shipment or delivery of the delivery item is postponed upon the purchaser’s request or due to circumstances which originated in the risk and responsibility range of the purchaser, the purchaser must compensate Hansgrohe for costs incurred due to storage and the costs for interest for the capital which was used for the delivery item. In the case of storage by Hansgrohe, the entitlement amounts to at least 0.5% of the still outstanding invoice amount for each outstanding month, starting with the month after notification of readiness of delivery; proof of lower damage remains possible. However, after specifying and unsuccessful expiry of a reasonable term, Hansgrohe is entitled to dispose of the delivery item otherwise and to provide the purchaser with a replacement delivery after a reasonably extended period of time.

V. Prices1. Delivery is carried out according to the prices which have been notified in the price list which is valid at the point in time which has been specified as the delivery date by the purchaser. All prices apply ex works / shipping point. If not specified otherwise, all prices are quoted in euro and plus transportation, insurance and installation and instruction costs if applicable and value added tax in the respectively effective amount.2. Hansgrohe reserves the right to increase prices reasonably if after contract conclusion cost increases occur, especially due to tariff

agreements, market cost prices or material price increases. Evidence of those will be shown to the purchaser upon request. 3. For order values below EUR 50 Hansgrohe will charge a surcharge of EUR 10 for small quantities. Purchase quantities which are smaller than the specified packaging units will be processed with a 10% surcharge to the net amount for the goods.

VI. Payment and arrears1. Payments are to be made to Hansgrohe without any deductions, as specified in the invoice, immediately upon receipt. Hansgrohe expressly accepts cheques under reserve. Cheques are only accepted pending full discharge of the debt and will only become effective once cashed in as payment. All payments are to be made exempt from charges. For cheques, the purchaser must bear the bank discount and collection charges and other bank charges. Payments are first settled for costs, then for interest and subsequently, for the respectively oldest main principal claim.2. If in arrears, default interest in the legally valid amount, however, at least 9% annually, will be charged; proof of lower damage is possible until the amount of the legally valid interest rate. 3. The purchaser is only entitled to offsetting and retention rights against the claims of Hansgrohe if the counterclaim is undisputed and has been determined as being legally binding.4. Any assignment of claims requires Hansgrohe’s consent. 5. If it is determined after contract conclusion or after delivery of the goods that the purchaser is not or no longer creditworthy, e.g. enforcement measures have been instituted against the purchaser or any other capital deterioration occurs, Hansgrohe can immediately assert claims which are not yet due or such claims for which a cheque had been provided. In these cases and if due invoices have not been paid despite reminder, Hansgrohe can demand advance payment or a collateral security for future deliveries and declare that a delivery will only be carried out based on cash on delivery. If a purchaser does not meet this demand, Hansgrohe is entitled to withdraw from the contract or to request immediate payment of delivered goods. In the case of withdrawal, the purchaser must compensate all costs which incurred to Hansgrohe until the withdrawal, including lost profit.

VII. Retention of title1. Hansgrohe keeps ownership of delivered items until all claims which have incurred from the business relationship with the purchaser at the time of contract conclusion, including all claims at this point in time which incurred from follow-on orders, repeat orders or spare parts orders have been paid. As far as the value of security rights which Hansgrohe is entitled to exceed the amount of all secured claims by more than 20%, Hansgrohe will release the corresponding portion of the security rights upon the purchaser’s request. 2. In the case of any purchaser behaviour contrary to contract, in particular delayed payment, Hansgrohe is entitled to take back the delivery. Taking back or garnishment of the delivery by Hansgrohe does not constitute a withdrawal from the contract, unless Hansgrohe confirms this expressly in writing. Hansgrohe is entitled to liquidation and the amount realized from the sale is to be offset against the purchaser’s liabilities, reasonable liquidation costs deducted. The purchaser is obligated to take good care of the delivery. In particular, the purchaser is obligated to sufficiently insure the goods against damages resulting from fire, water, storm and burglary at the replacement value. Security entitlements which incur in the case of damages are to be transferred to Hansgrohe. As far as maintenance and inspection work becomes necessary, the purchaser must perform such work at its own costs and on time. 3. The purchaser may neither pledge nor transfer delivery items as a security. The purchaser must inform Hansgrohe immediately in the case of garnishments or other third party interference so that Hansgrohe can file third party interference proceedings and the purchaser must provide Hansgrohe with any information and documentation which is required to protect the rights of Hansgrohe. Executory officers or third parties must be informed about Hansgrohe’s ownership. If third parties are not able to reimburse Hansgrohe with the court and out-of-court costs of third party interference proceedings, the purchaser is liable to pay Hansgrohe the incurred loss, subject to asserting additional claims due to damage, change or destruction of the object itself. 4. The purchaser may sell the item(s) of sale in the normal course of business or process them. The purchaser already assigns all demands to Hansgrohe which the purchaser gains from the sale to its buyers or third parties, irrespective of whether the items were sold without or after processing, in the amount of the final invoice amount including VAT. Hansgrohe accepts the assignment. In the case of a current account relationship between the purchaser and its buyers, the claim which is assigned to Hansgrohe by the purchaser in advance also refers to the accepted account balance and in the case of the purchaser’s insolvency also to the existing “causal” balance. The purchaser may collect the claims even after the assignment. The right to collect this claim directly shall not be affected. Hansgrohe will not collect the claim itself as long as the purchaser meets its payment obligations from the received proceeds, does not delay payments

General Terms and Conditions

and no insolvency proceedings were filed. 5. The purchaser obligates itself to provide Hansgrohe upon request with a detailed listing of the claims to which Hansgrohe is entitled including name and address of the buyer, amount of the individual claims, invoice dates, etc.; to provide Hansgrohe with all the required information to enable the assertion of the assigned claim, to allow verification of this information and to disclose the assignment to the buyers.6. The purchaser already declares its consent that the individuals which are commissioned by Hansgrohe to collect the conditional goods may, for this purpose, enter the building or drive onto the property where the conditional goods are located in order to pick up the conditional goods.7. Processing or alteration of the delivery item by the purchaser is always performed for Hansgrohe. If the item is processed with other items that are not the property of Hansgrohe, Hansgrohe acquires co-ownership of the new item in the ratio of the value of the delivery item to the other items that are to be processed at the time of the processing. Otherwise, the same applies for the item that is produced by the processing as for the item that was delivered under reserve. If the processing, mixing or combination is carried out in a way that the purchaser’s item is to be considered as the main item, it is considered as agreed that the purchaser assigns proportional co-ownership. The purchaser stores the resulting sole-ownership or co-ownership item for Hansgrohe.

VIII. Claims of Defect – Period of Limitation1. Claims of defect by the purchaser require that the purchaser has duly met the legal inspection and reprimand liabilities. 2. If a delivery item is deficient, the purchaser it entitled to the following rights:a) Hansgrohe is obligated to carry out subsequent performance and will carry this out at its own choice by correcting the deficiency during the course of subsequent improvement or by delivering an item which is free of defects. b) The period of limitation for claims of defect is one year as of delivery. The deficiencies of the delivery are to be notified immediately to Hansgrohe by the purchaser. Replaced parts become Hansgrohe’s property. The legal period of limitation for structures and items for structures (Section 438, para. 1 no. 2 BGB (German Civil Code) and for recourse from the supplier (Sections 478, 479 BGB (German Civil Code) shall not be affected.c) If the improvement fails the purchaser is entitled to withdraw from the contract or to decrease the purchase price. Withdrawal is exempted if the liability breach of Hansgrohe is only insignificant.d) After coordination with Hansgrohe, the purchaser must provide Hansgrohe with the required time and opportunity to carry out any subsequent improvements and replacement deliveries which Hansgrohe deems necessary. Otherwise, Hansgrohe is released from the liability for resulting consequences. If the purchaser requests the rush deployment of a technician due to company reasons incurring additional costs for Hansgrohe or if the purchaser requests the performance of work outside regular working hours, the purchaser must carry the resulting additional costs e.g. overtime premiums, longer transportation routes).e) Warranty is provided for replacements and improvements to the same extent as for the original delivery item, however with a time limit until the end of the warranty period of the original delivery item. 3. Damages resulting from wear and tear, inappropriate or improper use, faulty installation or startup by the purchaser or third parties, faulty or negligent treatment, excessive stress, inappropriate equipment or chemical, electrochemical or electrical influences, as far as those were not Hansgrohe’s fault, are the sole responsibility of the purchaser.

IX. ReturnsReturn of goods delivered by Hansgrohe is, in principal, never accepted unless they are proven to be deficient. Should Hansgrohe agree in an individual case, subsequent to prior written agreement, to accept a return as an exception, a processing fee of 25% of the net value of the returned goods plus VAT will be charged. The transportation risk and transportation costs will be borne by the ordering party.

X. Compensation Liability1. In cases of injuries to life, body or health which are based on a neglect of duty by Hansgrohe or a wilful neglect of duty by one of its legal representatives or auxiliary persons, Hansgrohe is liable according to the legal provisions..2. For other damages, the following applies:a) For damages which are based on a gross neglect of duty by Hansgrohe or a wilful gross neglect of duty by one of its legal representatives or auxiliary persons, Hansgrohe is liable according to the legal provisions.b) For damages which are based on a violation of essential contractual obligations due to simple negligence by Hansgrohe, its legal representatives or auxiliary persons, Hansgrohe’s liability is limited to the foreseeable loss typical for contracts in the maximum amount up to the value of the delivery item.

c) Indemnity claims for other damages due to breaching secondary obligations or insignificant obligations are exempted in cases of simple negligence.3. Liability disclaimers or restrictions do not apply if Hansgrohe fraudulently concealed a deficiency or provided a guarantee for the condition of the item. 4. The purchaser’s entitlement for replacement of unsuccessful expenses for the indemnity claim instead of the performance shall remain unaffected.

XI. Liability for Indirect DamagesHansgrohe is not liable for indirect damages resulting from a deficient delivery, e.g. loss of production, lost profit and additional consumption, except in cases of intent or gross negligence.

XII. Cancellation of the Sales Agreement1. If the sales agreement is cancelled (e.g. due to the withdrawal of one of the contracting parties), the purchaser is obligated to return the delivery item to Hansgrohe as advance performance, irrespective of the other processing according to the following paragraphs. Hansgrohe is entitled to have the delivery item picked up from the purchaser’s premises.2. Furthermore, Hansgrohe is entitled to request reasonable compensation from the purchaser for the deterioration, ruin or impossibility to hand over the delivery item due to a different reason within the area of risk and responsibility borne by the purchaser.3. In addition, Hansgrohe can request compensation for the utilisation or the use of the delivery item if the value of the delivery item has decreased between the end of its setup and the complete direct repossession by Hansgrohe. This decrease in value is calculated from the difference of the total price according to the order and the current market value as determined by sales proceeds or if sale is not possible, by an estimate from an independent sworn expert.

XIII. AssignmentThe assignment of purchaser’s rights and / or transfer of purchaser’s liabi-lities under the contract is not allowed without the written consent by Hansgrohe.

XIV. Export Control ProvisionsThe delivery items may be subject to the export control provisions of the Federal Republic of Germany, the European Union, the United States of America or other countries. In the case of a later export of the item of delivery abroad the purchaser is responsible for compliance with applicable legal provisions.

XV. Place of Performance, Place of Jurisdiction and Applicable Law1. For deliveries and performances, the location at which the delivery is carried out or where the performance is to be carried out is the place of performance. For all other liabilities resulting from the contract the shipping point is the place of performance.2. As far as the above conditions do not include a concluding regulation, German law, excluding the UN Sales Convention, applies. 3. For contracts with purchasers based in a member state of the European Union, Stuttgart (Germany) is agreed to as the exclusive place of jurisdiction. For contracts with purchasers based outside the European Union, all disputes which cannot be settled amicably will be decided conclusively according to the arbitrary court regulation of the German Institution for Arbitration (DIS), Bonn, Germany, excluding the regular legal process. The court of arbitration can also reach a decision about the validity of this arbitrary agreement.

XVI. Collateral Verbal Agreements, Partial Invalidity1. Any agreements that have been reached between Hansgrohe and the purchaser concerning the performance of this contract are specified in writing in this contract. Verbal collateral agreements do not exist.2. Should any provision be or become invalid in whole or in part, the validity of the remaining contract shall not be affected.

General Terms and Conditions of Hansgrohe SEVersion 27 March 2012

General Terms and Conditions


Spec

ial F

inish

Pro

gram

201

4 · S

ubje

ct to

alte

ratio

n in

the

inte

rest

of te

chni

cal a

dvan

cem

ent

Hansgrohe SE · P.O. Box 1145 · D-77757 SchiltachTel. +49 7836 51-0 · Fax +49 7836 [email protected] · www.axor-design.com

Hansgrohe NV/SA · Riverside Business Park · Blvd Internationalelaan 55K · B-1070 AnderlechtTel. +32 2 543 01 40 · Fax: +32 2 537 94 86 · [email protected] · pro.hansgrohe.be

Axor Manufaktur - Hansgrohe · In the Axor Manufaktur we individualize and perfect our products...

Documents

Transcript of Axor Manufaktur - Hansgrohe · In the Axor Manufaktur we individualize and perfect our products...