Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals...

33

Transcript of Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals...

Page 1: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.
Page 2: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Available products by division:

• Division 03—Concrete• Division 04—Masonry• Division 05—Metals• Division 06—Wood, Plastics, & Composites• Division 07—Thermal & Moisture Protection• Division 08—Openings• Division 09—Finishes• Division 12—Furnishings• Division 26—Electrical

Page 3: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 03—Concrete 

Page 4: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

PS 4000 Flat Wall Form

FACTS

• The improved tongue-and-groove design simplifies installation on the job and minimizes the problems associated with concrete spillage at the top of the wall.

• The 1-1/2” width of each stud provides a strong, secure, and generous surface area for mechanically securing any type of interior or exterior finish.

• The unique design provides strength, fire resistance, and dimensional stability .

• provides you with a superior construction technology that delivers cost-effective, high-performance structures that are safer, quieter, comfortable, energy efficient, and more structurally secure and environmentally responsible than any building system available on the market today.

Page 5: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

FLY ASH

FACTS

• Electricity is the fuel of the “Information Age” and power plants that burn coal account for more than half of the electricity produced in the United States. These power plants also produce residual materials like fly ash (which is captured from the exhaust of the boiler) and bottom ash (which is heavier and falls to the bottom of the boiler). These and other “coal combustion products” were originally treated as waste and disposed of in landfills.

• Because fly ash use displaces cement use, it also reduces the need for cement production – a major energy user and source of “greenhouse gas” emissions.

• If all the fly ash generated each year were used in producing concrete, the reduction of carbon dioxide released because of decreased cement production would be equivalent to eliminating 25 percent of the world’s vehicles.

• Better performance without increase in cost.

Page 6: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 04—Masonry

Page 7: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

CAVCLEAR MASONRY MAT

FACTS

• A fluid-conducting, non-absorbent polymer mesh made from 100% recycled plastic that is installed full-height in the airspace.

• Prevents mortar from bridging the airspace and results in a continuous area for drainage and ventilation.

• Prevents moisture-related failures• Ensures water management• Reduce life-cycle costs

Page 8: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

SEALTECH BLOCK

FACTS

• Certified “Green” with 10% recycled high-strength plastic powder.• Green certification allows potential for LEED credit component as

specified in guidelines established by USGBC.• Sealtech’s non-porous surface means decreased permeability,

making it water-resistant. • Stronger than standard concrete block yet 10% lighter, translating

to reduce shipping and labor costs. • Available in 16 colors.• Architectural CMUs in a variety of shapes and sizes, including

standard 4”, 8” and 12”.• Available in both split face and smooth

textures.• A fire rating comparable to standard

concrete block.

Page 9: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

ENVIRO-BRICKS

FACTS

• Compressed interlocking soil stabilized• Energy efficient, environmentally friendly• Very high R-value• Fire, water, insect, sound, mold and can be certified hurricane

proof• Customizable• eliminates wall insulation and the need for skilled masons.

Page 10: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 05—Metals

Page 11: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

MAZE NAILS

FACTS

• Made from recycled steel• The scrap steel generated while making nail heads goes right back

to the steel mills for re-melting, along with steel from scrapped automobiles, I-beams, radiators, etc.

• Nails are galvanized with a double hot-dipped zinc coating for extra durability.

Page 12: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

COLD-FORMED METAL FRAMING

FACTS

• Lightweight• Dimensionally stable.• Resistant to insect damage• Contains 20-25% recycled material (10-15% post-consumer

content), though some manufacturers have in excess of 90% recycled content

• Steel studs are recyclable at the end of the building’s life.

Page 13: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 06—Wood, Plastics, and Composites

Page 14: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

ECOSURFACES

FACTS

• Americans disposing of over 245,000,000 tires every year. Through the Xtreme Recycled Rubber program, ECOsurfaces offers designers a fresh new way to create attractive environments using Earth Friendly materials by using recycled tires.

• As strong and resilient as the originaltire rubber.• Slip-resistant• Weather resistant withstanding extreme temperatures.

Page 15: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

RECLAIMED WOOD

FACTS

• It is estimated that reclaiming one million board feet of lumber preserves one thousand acres of old growth forest.

• reclaimed wood would be chipped, burned or otherwise wasted if not reused.

• Old growth forests are protected in both local and global communities.

• It is durable and aesthetically pleasing.• The wood has stabilized over time, preventing changes due to

humidity, etc.• Gives uniqueness to the design.• Preserves history.

Page 16: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

ENGINEERED WOOD Gluelam - glued, laminated timber

FACTS

• Gluelam: glued, laminated timber• Engineered lumber products provide a significant environmental

advantage over solid wood by utilizing fast-growing, small diameter trees effectively.

• Superior strength of glulam allows for longer clear floor spans than solid-sawn lumber

Page 17: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

PLASTIC LUMBER

FACTS

• Plastic waste occupies about 25% of overall landfill space in the U.S.

• Plastic lumber makes good use of recycled plastic and is an effective replacement for pressure-treated lumber, protecting timber resources.

• Won’t rot, absorb water, splinter, or crack and is resistant to shock.

• Can accept most types of fasteners• Resistant to oil, salt, and chemicals• Long lasting• Easy installation

Page 18: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 07—Thermal and Moisture Protection

Page 19: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

CONCRETE ROOF TILES

FACTS

• Is made from an approximate mix of 3 parts sand to 1 part cement and 10% water.

• Limited maintenance roofing product • Products have passed all tests related to break strength and

permeability.• Freeze/Thaw and U.V. Protection• Fire safe• Energy-conscious roofing product• Concrete tiles are wind resistant. The material is wind tunnel

tested to withstand winds up to 125 miles per hour.• Concrete tiles can last 100 years.• It is not made with petroleum-based products

Page 20: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Cool Roofing: Cold Applied Built-Up Roofing

FACTS

• Tremco’s roofing products and systems can assist building in obtaining LEED certification by contributing to the following areas:

• Heat Island Effect: Roof—provides high solar reflectance and high thermal emittance.

• Recycled Content—Tremco roofing products contain recycled content.• Renewable Energy—Tremco offers Photovoltaic Roofing solutions.• Additional points may be obtained through the use of regionally

manufactured materials and by using innovative design practices. • Other benefits include: reduces fumes and pollution, environmentally

friendly, eliminates danger of fire and smoke pollution, better for use on occupied buildings, excellent thermal movement performance, improved resistance to abuse, longer life

Page 21: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 08—Openings

Page 22: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

GreenScreen PVC-free Fabrics

FACTS

• PVC-free construction of polyurethane and specially designed, pre-stretched polyester core.

• 5 different openness factors: blackout, 3%, 5%, 10%, and 25%.• Elimination of PVC content in production of GreenScreen fabrics

means shades contain no VOC’s (volatile organic compounds) and does not “offgas” during the life of the product.

• PVC-free content makes it easier and quicker to recycle GreenScreen fabrics and divert them from landfills.

• Optional metallized finish increases solar reflection by an avg. of 5% and reduces visible light transmission ( glare) by 3%.

• Metallization reduces solar gain versus an unshaded window by up to 70%

Page 24: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Marmoleum Flooring

FACTS

• Raw materials and energy are used efficiently, waste is recycled wherever possible, and emissions are kept to an absolute minimum.

• Life-cycle analysis shows that these linoleum products are the ecologically preferred floor covering.

• Linoleum is produced from renewable materials: linseed oil, wood flour, jute and ecologically responsible pigments.

• Marmoleum is a natural organic product, its performance is enhanced by time, as exposure to air serves to harden and increase its durability.

Page 25: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Cork Floating Floor: Earth Series

FACTS

• Highly compressible and resilient• Excellent thermal and sound insulator• Lightweight and buoyant• Warm to the touch• Natural fire retardant• Hypoallergenic and insect resistant• Finish: Colored-stain and matte• Installation: mechanical locking system, glueless• Warrenty: 10 yr limited residential and commercial• Core: impervious to moisture

Page 26: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Australian Chestnut Flooring

FACTS

• Grade: Rustic grade• LEED Qualification: MR 7-Certified wood• Product is certified according to the Principles &

Criteria of the Forest Stewardship Council (FSC), adhering to strict environmental and social standards

• Easily meets E-1 standard for indoor air quality • Finish: Aluminum Oxide enhanced UV-cured acrylic

urethane with scratch-resistant hardened acrylic top-coat.

Page 27: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

BAMBOO FLOORING

FACTS

• Bamboo is not wood, but rather a type of a grass • It can grow up to 12" a day, it is quickly renewable. • Can be harvested in as little as 5 years. • Very strong and stable, more so than many hardwoods. • Less likely to swell or shrink. • Easy to install, reasonably priced • Energy efficient, environmentally friendly

Page 28: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 12—Furnishings

Page 29: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Climatex Upholstery Fabrics for climate control seating

FACTS

• CLIMATEX® is a mixture of three fibers providing seating comfort.• As the climate control features originate from their raw materials,

chemical treatment or backing are obsolete. Therefore CLIMATEX® can be produced in various fabric techniques. Modern designs and latest ecology needs can be fulfilled.

• The best features of three raw materials result in excellent seating comfort.

- pure wool: with excellent heat conservation and great moisture absorption-polyester: with a fast humidity transport-Ramie: with a cooling effect and great moisture transport, acting as a middleman between pure wool

and polyester

Page 30: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Division 26—Electrical

Page 31: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

String Ribbon

FACTS

• String Ribbon combines the best attributes of conventional crystalline silicon and emerging thin films.

• It achieves the reliability, stability, high efficiency, and market acceptance of crystalline silicon

• In the String Ribbon technique, two high temperature strings are pulled vertically through a shallow silicon melt, and the molten silicon spans and freezes between the strings (see diagram).

• This advantage in material efficiency means String Ribbon yields over twice as many solar cells per pound of silicon as conventional methods.

Page 32: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Evergreen Solar: Spruce Line Photovoltaic Modules 190, 180 and 170W

FACTS

• Backed by a 25 year limited power warranty; 2 year workmanship warranty.

• A rigid, double walled, deep frame with integrated water drainage holes

• Sealed junction box never needs field maintenance • Low energy – an energy payback time as rapid as 18 months• Low carbon• Low lead• Fully tested to ISTA standards – the world leader in performance

tests for packaged goods

Page 33: Available products by division: Division 03—Concrete Division 04—Masonry Division 05—Metals Division 06—Wood, Plastics, & Composites Division 07—Thermal.

Think Green

For products and samples, feel free to contact us [email protected]