AUXILIARY ARC LAMP CONTROL Model LD-3AI · MODEL LD-3AI – N comes with 1/2 inch bushing that fits...

1360 Mont-Hibou, Sainte-Adèle, Qc, Canada J8B 1X7 Tel.: (450) 229-5597 Fax: (450) 229-6509 http://www.lendar.com MODEL LD-3AI – N comes with 1/2 inch bushing that fits in a standard 7/8 inch diameter knock-out. MODEL LD-3AI – F comes with one horizontal and one vertical mounting bracket. This relay can be used with autotransformer ballast, isolated ballast or electronic ballast. This relay will turn on the auxiliary arc lamp (quartz, incandescent or fluorescent) during a cold start or a hot start and will turn it off automatically 2.25 minutes after HID lamp restrikes. This relay can be used on most of HID lamp up to 1000 watts reducing the inventory of relays. Should be tested on the ballast chosen before using. It is a solid state encapsulated device which makes it compact and noiseless. It is CSA and UL approved and has a 12 month guarantee. It is supplied with 200˚C leads and will work at 96˚C on housing near rivet. It is rated 500 watts at 120 volts for the auxiliary lamp. The white lead is the common connection for the neutral of the AC to the ballast and the auxiliary lamp. The black lead is connected to the 120 volts either direct from the line or from a tap of the ballast. The red lead is connected to the auxiliary lamp. The yellow leads are connected in series with the HID lamp to sense current. AUXILIARY ARC LAMP CONTROL Model LD-3AI SPECIFICATION SHEET AND OPERATION The wiring diagram shows how the relay should be connected: LAMPE DHI-HID LAMP JAUNE YELLOW JAUNE YELLOW ROUGE RED 1000W. MAX BLANC WHITE AMORCEUR IGNITOR HID BALLAST DHI CONTRÔLE D'ÉCLAIRAGE AUXILIAIRE AUXILIARY ARC LAMP CONTROL MODEL LD-3AI LR 50553 R C US LENDAR DESIGN INC. CANADA NOIR BLACK BOBINAGE SORTIE 120 V 120 V WINDING OR TAP LAMPE AUX LAMP MAX. 500W 120V

Upload
others
Category

Documents
view
2
download
0

Embed Size (px):

Transcript of AUXILIARY ARC LAMP CONTROL Model LD-3AI · MODEL LD-3AI – N comes with 1/2 inch bushing that fits...

1360 Mont-Hibou, Sainte-Adèle, Qc, Canada J8B 1X7 Tel.: (450) 229-5597 Fax: (450) 229-6509 http://www.lendar.com

MODEL LD-3AI – N comes with 1/2 inch bushing thatfits in a standard 7/8 inch diameter knock-out.

MODEL LD-3AI – F comes with one horizontal andone vertical mounting bracket.

This relay can be used with autotransformer ballast, isolatedballast or electronic ballast.This relay will turn on the auxiliary arc lamp (quartz, incandescentor fluorescent) during a cold start or a hot start and will turn it offautomatically 2.25 minutes after HID lamp restrikes.This relay can be used on most of HID lamp up to 1000 wattsreducing the inventory of relays. Should be tested on the ballast chosen before using.It is a solid state encapsulated device which makes it compact andnoiseless.It is CSA and UL approved and has a 12 month guarantee.It is supplied with 200˚C leads and will work at 96˚C on housing near rivet.It is rated 500 watts at 120 volts for the auxiliary lamp.

The white lead is the common connection forthe neutral of the AC to the ballast and the auxiliary lamp.The black lead is connected to the 120 volts eitherdirect from the line or from a tap of the ballast.The red lead is connected to the auxiliary lamp.The yellow leads are connected in series with the HIDlamp to sense current.

AUXILIARY ARC LAMP CONTROL Model LD-3AI

SPECIFICATION SHEET AND OPERATION

The wiring diagram shows how the relay should be connected:

LAMPE DHI-HID LAMPJAUNE

YELLOW

JAUNE

YELLOW

ROUGE

RED

1000W. MAX

BLANC

WHITE