®

© 2000 SQUARE ENIX CO., LTD. All Rights Reserved.

ASSEMBLYINSTRUCTIONS

WE RECOMMEND TO PUT LATEX GLOVES ONTO HANDLE YOUR STATUE.

PLEASE DO NOT ASSEMBLE YOUR STATUERIGHT AFTER YOU HAVE RECEIVED IT.

The resin material needs time to warm up at roomtemperature a daytime to avoid risks of breaking.

Put the block of crystal / cloud of smoke in the expected place at the left back of the base.

Place the 3 clouds of smoke around the base. 2 in front of the base then the third at the back of one crystal.

2

2

1

1

Put the crystal included electronics components in the main cloud of smoke.

Put the tail at the back of Kuja.4

4

3

3

Place the two little shreds of fabric at the back of Kuja.

Put the dress on the expected place at the back of Kuja.

6

5

6

5

Place Kuja on one of the crystal. Put the metal rod on the expected place on the left leg of Kuja.

Place the big shred of fabric at the back of the left leg of Kuja.

8

7

8

7

Put the right leg of Zidane in the expected place in the base.

Put the tail at the back of Zidane.

10

9

10

9

Put the 4 filling parts of the ring inside of it, placing them in the order (A, B, C then D).

Put the daggers of Zidane in his hands.

A

B

C

D

12

11

12

11

Put the ring inside of the main cloud of smoke. 13

Place the Crystal of life at the center of the ring, by putting it at the top of the crystal with electronic components.

14

14

13

There are 2 switches on the base. The first at the back, near to the power supply, the second at the front behind the plate.

Place the plate « FINAL FANTASY IX » at the front of the base.

15

16

16

15 ARRIÈRE AVANT