As good as ever - Termate...This leaflet displays our range of DMC Traditional Busbar Supports. We...
Transcript of As good as ever - Termate...This leaflet displays our range of DMC Traditional Busbar Supports. We...
[email protected]+44 (0)115 978 4652
Easy selection and strong performance have resulted in more than 1 million worldwide installations.
As good as ever...1 Icw ratings up to 100kA/1sec1 Self extinguishing: UL94-V01 UL Recognised1 Easy installation1 Strong and lightweight
Termate have manufactured high performance components since 1956, supplying a global customer base from our U.K. headquarters.
For over 50 years we have independently tested our products to ensure that they
meet and exceed the demands of international standards including IEC 61439. We
work with leading test houses and certification bodies
including kATF, ASTA and Dekra.
Our products offer superb performance and longevity, incorporating materials
manufactured to our specification. We listen to our customers requirements and
respond, which has led to the introduction of versatile products. These can be used
in more applications reducing the total costs to our partners.
We are well known by our customers for the detailed application
engineering and the first class customer service we offer.
This leaflet displays our range of DMC Traditional Busbar Supports. We also
manufacture a range of MX Busbar Supports in thermoplastic material where
strong and lightweight solutions are preferred.
Our Busbar Supports are part of our LV Power Products Range which
comprises Busplugs, Stand-offs, Through Wall Bushings, and Components for
Withdrawable Systems. These products are all manufactured with the latest
equipment at our facility in Nottingham.
We hope that our Busbar Supports are of interest. If you would like to receive
a quote, application help or learn more about any of our products, we would
be delighted to hear from you.
You can find out more information by visiting our website at
www.termate.com, alternatively you can email our sales team at
[email protected] or call +44 (0)115 978 4652.
Busbar Supports3 Pole | Conductor 6.3 or 10mm | PC 60-130mm
ReferenceTermate Icw
Rating Type Part NumberNumber of Poles
Conductor Size mm
[PC] Phase Centres
Bars Per Pole
3 6.3 60 1 50kA 1s 1 3603BS
3 6.3 65 1 50kA 1s 1 3653BS
3 10 60 1 50kA 1s 1 3603MS
3 10 65 1 50kA 1s 1 3653MS
3 10 130 1 100kA 1s* 2 31303P1
3 10 130 2 100kA 1s* 3 31303P2
3 10 130 3 100kA 1s* 4 31303P3
Measurements in mmPart NumberL
LengthW
WidthH
HeightSW
Slot WidthH1
Base to barSC
Slot CentresFC
Fix CentresC
Clearance
200 20 45 6.7 31.8 60 178 21 3603BS
210 20 45 6.7 31.8 65 188 21 3653BS
200 20 45 10.2 31.8 60 178 19 3603MS
210 20 45 10.2 31.8 65 188 19 3653MS
470 20 45 10.1 32 130 448 85 31303P1
470 20 45 30.3 32 130 448 75 31303P2
470 20 45 50.5 32 130 448 65 31303P3
Material: Glass Reinforced Polyester DMC
Conductor Temp: 140°C†
Flammability: UL94-VO
Glow Wire: 960°C
Working Voltage: 1000V
Insulation Voltage: 1000V
Impulse Voltage: 12kV
Insulation Voltage: 1000V
UL Recognised Component
File numberE505645
Properties
† In line with the requirements set out in IEC 61439 the supports are capable of carrying conductors operating at an average of 140°C (Max. 145°C), the material for the supports having a satisfactory thermal index value established using methods similar to IEC 60216.
If you need to rely on our technical data or dimensions in your application, please contact us for further confirmation or detailed dimensional drawings/3D models.
Warranty as stated in Encompass Terms and Conditions of Trading is void if any modification is made to the warranted product.
*When installed as part of Termate Power Plus System
H H1
LM8 fixings, recommended tightening torque 10Nm
SW SC CFC
W
From left to right : Type 1, Type 2, Type 3, Type 4
† In line with the requirements set out in IEC 61439 the supports are capable of carrying conductors operating at an average of 140°C (Max. 145°C), the material for the supports having a satisfactory thermal index value established using methods similar to IEC 60216.
If you need to rely on our technical data or dimensions in your application, please contact us for further confirmation or detailed dimensional drawings/3D models.
Warranty as stated in Encompass Terms and Conditions of Trading is void if any modification is made to the warranted product.
Busbar Supports4 Pole | Conductor 6.3mm | PC 65mm
ReferenceTermate Icw
RatingType Part NumberNumber of
PolesConductor Size mm
[PC] Phase Centres
Bars Per Pole
4 6.3 65 1 50kA 1s 1 3654BS4 6.3 65 2 50kA 1s 2 3654TBS
Measurements in mmPart NumberL
LengthW
WidthH
HeightSW
Slot WidthH1
Base to barSC
Slot CentresFC
Fix CentresC
Clearance
275 20 45 6.7 31.8 65 253 21 3654BS275 20 45 6.7 32 65 253 14 3654TBS
H H1
L
SW SC CFC
W
M8 fixings, recommended tightening torque 10Nm
From left to right : Type 1, Type 2
Material: Glass Reinforced Polyester DMC
Conductor Temp: 140°C†
Flammability: UL94-VO
Glow Wire: 960°C
Working Voltage: 1000V
Insulation Voltage: 1000V
Impulse Voltage: 12kV
Insulation Voltage: 1000V
UL Recognised Component
File numberE505645
Properties
Material: Glass Reinforced Polyester DMC
Conductor Temp: 140°C†
Flammability: UL94-VO
Glow Wire: 960°C
Working Voltage: 1000V
Insulation Voltage: 1000V
Impulse Voltage: 12kV
Insulation Voltage: 1000V
UL Recognised Component
File numberE505645
Properties
† In line with the requirements set out in IEC 61439 the supports are capable of carrying conductors operating at an average of 140°C (Max. 145°C), the material for the supports having a satisfactory thermal index value established using methods similar to IEC 60216.
If you need to rely on our technical data or dimensions in your application, please contact us for further confirmation or detailed dimensional drawings/3D models.
Warranty as stated in Encompass Terms and Conditions of Trading is void if any modification is made to the warranted product.
H H1
L
SW SC CFC
W
M8 fixings, recommended tightening torque 10Nm
Busbar Supports4 Pole | Conductor 10mm | PC 65-110mm
ReferenceTermate Icw
Rating Type Part NumberNumber of Poles
Conductor Size mm
[PC] Phase Centres
Bars Per Pole
4 10 65 1 50kA 1s 1 3654MS
4 10 90 1 50kA 1s 1 30904MS
4 10 90 2 50kA 1s 2 30904DSS
4 10 110 1 80kA 1s 1 31104MS
4 10 110 2 80kA 1s 2 31104DSS
4 10 110 3 80kA 1s 3 31104MSS
4 10 110 3 100kA 1s* 3 31104P3
4 10 110 1, 2 or 3 50kA 3s 4 31104TMS‡
Measurements in mmPart NumberL
LengthW
WidthH
HeightSW
Slot WidthH1
Base to barSC
Slot CentresFC
Fix CentresC
Clearance
275 20 45 10.2 31.8 65 253 19 3654MS
470 20 45 10.1 34.5 90 448 79.5 30904MS
470 20 45 30.3 34.5 90 448 70 30904DSS
470 20 45 10.1 34.5 110 448 50.5 31104MS
470 20 45 30.3 34.5 110 448 40.5 31104DSS
470 20 45 50.5 34.9 110 448 30.5 31104MSS
470 20 45 50.5 32 110 448 30.5 31104P3
470 20 (44)* 45 10.1 34.7* 110 448 30 31104TMS
*With inserts fitted
From left to right : Type 1, Type 2, Type 3, Type 4
*When installed as part of Termate Power Plus System ‡Not a recognised UL component
Busbar Supports4 Pole | Conductor 10 mm | PC 115-130 mm
ReferenceTermate Icw
RatingType Part NumberNumber of
PolesConductor Size mm
[PC] Phase Centres
Bars Per Pole
4 10 115 1 100kA 1s* 1 31154M14 10 115 2 100kA 1s* 2 31154M24 10 115 3 100kA 1s* 3 31154M34 10 130 1 100kA 1s* 1 31304P14 10 130 2 100kA 1s* 2 31304P24 10 130 3 100kA 1s* 3 31304P34 10 130 1, 2 or 3 80kA 1s 4 31304TMS‡
Measurements in mmPart NumberL
LengthW
WidthH
HeightSW
Slot WidthH1
Base to barSC
Slot CentresFC
Fix CentresC
Clearance
582 20 45 10.1 34.5 115 560 98.5 31154M1582 20 45 20.3 34.5 115 560 94.5 31154M2582 20 45 30.3 34.5 115 560 88.5 31154M3582 20 45 10.1 32 130 560 75 31304P1582 20 45 30.3 32 130 560 65 31304P2582 20 45 50.5 32 130 560 55 31304P3582 20 (44)* 45 10.2 34.7* 130 560 35 31304TMS
*With inserts fitted
From left to right : Type 1, Type 2, Type 3, Type 4
*When installed as part of Termate Power Plus System ‡Not a recognised UL component
H H1
L
SW SC CFC
W
M8 fixings, recommended tightening torque 10Nm
† In line with the requirements set out in IEC 61439 the supports are capable of carrying conductors operating at an average of 140°C (Max. 145°C), the material for the supports having a satisfactory thermal index value established using methods similar to IEC 60216.
If you need to rely on our technical data or dimensions in your application, please contact us for further confirmation or detailed dimensional drawings/3D models.
Warranty as stated in Encompass Terms and Conditions of Trading is void if any modification is made to the warranted product.
Material: Glass Reinforced Polyester DMC
Conductor Temp: 140°C†
Flammability: UL94-VO
Glow Wire: 960°C
Working Voltage: 1000V
Insulation Voltage: 1000V
Impulse Voltage: 12kV
Insulation Voltage: 1000V
UL Recognised Component
File numberE505645
Properties
Busbar Supports4 Pole | Conductor 6.3mm | PC 60mm or Blank
ReferenceTermate Icw
RatingType Part NumberNumber of
PolesConductor Size mm
[PC] Phase Centres
Bars Per Pole
4 6.3 60 2 31kA 1s 1 360D
– – Blank – – 2 3470BBS
– – Blank – – 2 3582BBS
Measurements in mmPart NumberL
LengthW
WidthH
HeightSW
Slot WidthH1
Base to barSC
Slot CentresFC
Fix CentresC
Clearance
275 20 55 6.5 43.5 60 253 19 360D
470 20 45 – – – 448 – 3470BBS
582 20 45 – – – 560 – 3582BBS
From left to right : Type 1, Type 2
H H1
L
SW SC CFC
W
M8 fixings, recommended tightening torque 10Nm
Material: Glass Reinforced Polyester DMC
Conductor Temp: 140°C†
Flammability: UL94-VO
Glow Wire: 960°C
Working Voltage: 1000V
Insulation Voltage: 1000V
Impulse Voltage: 12kVType 1 12kVType 2 —
Insulation Voltage: 1000V
UL Recognised Component
File numberE505645
Properties
† In line with the requirements set out in IEC 61439 the supports are capable of carrying conductors operating at an average of 140°C (Max. 145°C), the material for the supports having a satisfactory thermal index value established using methods similar to IEC 60216.
If you need to rely on our technical data or dimensions in your application, please contact us for further confirmation or detailed dimensional drawings/3D models.
Warranty as stated in Encompass Terms and Conditions of Trading is void if any modification is made to the warranted product.
† In line with the requirements set out in IEC 61439 the supports are capable of carrying conductors operating at an average of 140°C (Max. 145°C), the material for the supports having a satisfactory thermal index value established using methods similar to IEC 60216.
If you need to rely on our technical data or dimensions in your application, please contact us for further confirmation or detailed dimensional drawings/3D models.
Warranty as stated in Encompass Terms and Conditions of Trading is void if any modification is made to the warranted product.
Material: Glass Reinforced Polyester DMC
Conductor Temp: 140°C†
Flammability: UL94-VO
Glow Wire: 960°C
Working Voltage: 1000V
Insulation Voltage: 1000V
Impulse Voltage: 12kV
Insulation Voltage: 1000V
UL Recognised Component
File numberE505645
Properties
Busbar Supports4 Pole | Horizontal Bar | PC 53mm
ReferenceTermate Icw
RatingType Part NumberNumber of
PolesConductor Size
mm[PC] Phase
CentresBars Per
Pole
4 Flat 25.4 x 6.3 53 1 20kA 1s 1 3534FB
Measurements in mmPart NumberL
LengthW
WidthH
HeightSW
Slot WidthH1
Base to barSC
Slot CentresFC
Fix CentresC
Clearance
275 20 35 26 31.8 53 253 31.8 3534FB
Type 1
H H1
L
SW SC CFC
W
M8 fixings, recommended tightening torque 10Nm
Additional Spacers Required Per Busbar Support
Part Number
Conductor 38.1mm
Conductor 50/50.8
mm
Conductor 60mm
Conductor 63.5mm
Conductor 75/76.2
mm
Conductor 80 mm
Conductor 100/101.6
mm
Conductor 152.4
mm
3603MS
1 x CP12 1 x CP25 1 x CP252 x MXS 5
1 x CP251 x CP12 1 x CP50 1 x CP50
1 x MXS 51 x CP501 x CP25
2 x CP501 x CP25
3653MS
3653BS
3654BS
3603BS
3654TBS
3654MS
31303P1
31303P2
31303P3
31304P1
31304P2
31304P3
31104P3
30904DSS
1 x CP25 1 x MXS 5
1 x CP25 3 x MXS 5
1 x CP25 1 x CP12 1 x MXS5
1 x CP50 1 x MXS 5
1 x CP50 2 x MXS 5
1 x CP50 1 x CP25 1 x MXS 5
2 x CP50 1 x CP25 1 x MXS 5
30904MS
31104DSS
31104MS
31154M1
31154M2
31154M3
31304TMS
31104TMS
31104MSS
CP Spacers MXS Spacer
Spacer Selection Per AssemblyMaterial: Polyamide 6
Operating Temp: 140°C
Flammability: UL94-VO
Glow Wire: 960°C
Properties
Traditional Support
Traditional Support
Spacer
Typical Spacer Installations
4 Pole 2 Bar
M8 fixings, recommended tightening torque 10Nm
Note: For twin bar per pole systems, in order to retain the appropriate rating, it is essential for the conductors to be kept apart. Whilst fishplates and take-off connections help in this aspect, additional packing pieces
must be installed at no more than 500mm centres.
Should you require further information or technical advice in the installation of our products, please do not hesitate in contacting us by visiting our website at www.termate.com,
alternatively you can email our sales team at [email protected] call +44 (0)115 978 4652.
Termate is committed to the highest standard of Customer Focus and we have made every effort to maintain the accuracy and completeness of the information provided in this catalogue. Where improvements to our products affect
their installation and usage we endeavour to contact any Customers who may be affected.
F/BUSBARS/V5
Termate Limited John Street New Basford Nottingham NG7 7HL
www.termate.com
[email protected]+44 (0)115 978 4652