ARDUINO UNO LCD

SHIELD

Arduino LCD Shield with

Arduino UNO Board

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital input/output pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

HOW IT LOOK’S

Product Code: RM1146 Product Code: RM1146

ARDUINO SHIELD

This is a very popular LCD Keypad shield for Arduino and other variants. It includes a 2x16 LCD display and 1 momentary push reset buttons. Pins 2, 3, 4, 5, 11 and 12 are used to interface with the LCD. Just one Reset Pin is used to reset the circuit. The LCD shield supports contrast adjustment functions. This design is great since easily connect with the Arduino. Often project applications require testing or debugging. Displaying information right away help on most occasions when a computer is not at reach.

FEATURE’S

Microcontroller : ATmeg328 Operating Voltage : 5V Input Voltage : 7-12V Digital I/O Pins : 14 (of which 6 provide PWM output) Analog Input Pins : 6 DC Current : 40 mA DC Current : 50 mA Flash Memory : 32 KB SRAM : 2 KB EEPROM : 1 KB Clock Speed : 16 MHz

SPECIFICATION

- Operating Voltage:5V - RESET button for resetting arduino program - Integrate a potentiometer for adjusting the backlight - Dimension: 80 x 58 mm

Product Code: RM1146

CONTACT US

B5 C Block Sector 31, Above Indian Overseas Bank

Noida Uttar Pradesh 201301

India

Mob. +91-8744000555

Tel. +91-120- 4317229

Email ID admin@robomart.com

Web. https://www.robomart.com

THANK YOU !!!