ARCHITECTURAL METAL WALL AND ROOF SYSTEMS

ARCHITECTURAL METAL WALL AND ROOF SYSTEMS

07 40 00 /CENBuyLine 9165

CENTRIA Formawall is the most advanced insulated metal composite wall system available today, providing outstanding thermal, moisture and air infiltration; integrated window, louver and sunshade offerings; and unprecedented design freedom from two design series – Dimension Series® and Graphix Series™. All Formawall panels may be installed vertically or horizontally, and are often curved in a design. Formawall is simply the most complete wall system available today.

162

For complete details and

specifications visit

CENTRIA.com

Distinctively INNOVATIVE.Distinctively SUSTAINABLE.Distinctively INSTALLED.CENTRIA is the place where owner and architect visions are realized, contractor challenges are conquered and discoveries are made for greener ways to build with metal. Through continuous pursuit of excellence and innovation in the design, engineering and manufacturing of exterior wall and roof systems, no other company does more to improve the aesthetics, durability and performance of our world’s commercial buildings than CENTRIA.

Insulating foam core, factory foamed-in-place, provides a thermally efficient exterior wall in either 2" [51mm] or 3" [76mm] thickness

Durable metal skins provide impact resistance, strength for increased span capability and a built-in vapor barrier

High performance coatings offer long-term performance, minimal maintenance and excellent color selection for your building’s exterior

Concealed clips and fasteners provide a sleek exterior appearance with proven long-term performance

Variable reveal sizes, 1/2" [13mm] to 6" [152mm]

Rainscreen and pressure equalization design with concealed sealant protects against water penetration

1

2

3

4

5

6

1

2

3 4

5 6

FORMAWALL® DIMENSION SERIES®

Parkwest Medical Center Knoxville, TNArchitect: Earl Swensson Assoc. Inc Nashville, TN

SUBSTRATE & CORE• Standard–22/26gageG-90galvanizedsteelfaceandliner

withHCFC-freepolyurethaneorpolyisocyanuratefoam-insulatedcore

• Optionalgagesavailable–consultCENTRIA• Optional–stainlesssteelfacesheet,304stainlesssteel,

22or20gage,smooth,embossedorstriated• Optional–.040AluminumFace(2”thickonly),flatembossed orsmoothstriated

JOINERY• Horizontalorientedpanel–Rainscreen,pressure-equalized

anddrainablejoinery,1/2”nom.joint–standard• Verticalorientedpanel–Doubletongue-and-groove,

1/8”nom.joint–standard

SURFACE FINISH• Exterior – Non-directionalembossedflatorstriated – Smoothflatorstriated• Interior – Non-directionalembossedplankedorflat – Smoothplanked

PANEL WIDTH• Availablefrom–10”to 40”

PANEL LENGTH (Steel Face)• Smooth–16’max.• Embossedstriated–37’max.• Embossed–37’max.• Smoothstriated–20’max.• Duracast–28’max.

PANEL LENGTH (Aluminum Face)• Embossed–12’6”max.• Smoothstriated–12’6”max.

PANEL THICKNESS/DEPTH OF REVEAL• 2”with1-3/16”deepreveal–standard• 3”with2-3/16”deepreveal

“R” VALUE• 2”panelwith1/2”reveal–R14• 3”panelwith1/2”reveal–R21R-ValuesarebasedonASTMC1363.Airfilmsareincluded.

CombineFormawallpanelsofvaryingthickness–2”thickor3”thick.

SpecifythewidthofSteelFacedFormawallpanelreveals–anywherefrom1/2”to6”in1/2”increments.

AluminumFacedFormawallpanelreveals,consultCENTRIA

WithoptionalsteepslopedjointsFormawallpanelscanbeinstalledhorizontallyonanangle.

Exploreevenmoreinterestingwallarticulationsbyincorporatingoptional2”thickpanelprofileshapes.(12”wideonly)

STEEP SLOPE JOINTS

VARYING REVEALS

VARYING PANELTHICKNESS

DS-59 PROFILE

DS-60 PROFILE

DIMENSION SERIES DESCRIPTION Insulated metal composite wall panel system

WithFormawall®DimensionSeries®,designerscombinepanelsofvaryingthickness,widthofreveal,andprofileshapetogivewallsuniquearticulationsandshadows.

SILVER

163

FORMAWALL® DIMENSION SERIES® PEFormawall®DimensionSeriesPEfeaturesanintegralpressureequalizedventdrainagechannelforFormawallDimensionSeriesandFormawallGraphixSeriesexteriormetalwallpanels.Thecontinuousairsealisnotcompromisedbythesealplateventingandtheplatetransfersloadtoverticalsupport.Thisdesigncreatestwolinesofdefenseagainstwaterintrusion.

FEATURES & BENEFITS•Pressure-equalizedvertical&horizontaljoinery•Lightweight–easytohandleandinstall•Miteredpanelspermitclean,sharpcornersand

soffittransitions•Highstrengthpanelsofferincreasedspan

capabilitywithlessframingrequired•Concealedclips,fastenersandsealants•Trimlessendseliminateoverlapping•CradletoCradleSMCertification•Integratedlouversandsunshadesavailable•Thermalbreakbetweenfaceandlineroffers

efficientpanelR-Values

PERFORMANCEOPTION


9165-10 Centria.indd 3 10/14/09 12:02:35 PM10142009120628

AluminumAvailableeithersmoothorembossed,aluminumfacingoffersincreaseddesignversatilityandperformance

FORMAWALL® DIMENSION SERIES®

SILVER

164

Forcompletedetailsand

specificationsvisit

CENTRIA.com

THECOMPLETEWALLSYSTEM

Formavue® WindowsFulllineofwindowsforanyframingtypethatintegratemechanicallywithFormawallpanelsforthehighestperformingpanel/windowinterface

C/S SunshadesAttractiveandfunctionalsunshadesdesignedspecificallyforthermalandstructuralintegrationwithFormawallpanelsandFormavuewindows

C/S LouversHigh-qualitylineoffixed,drainableandstorm-resistantlouversengineeredspecificallyforfastandeasyintegrationwithFormawallpanels

Kalwall® Translucent WindowsLightweightyetstrong,thesewindowsystemscombinethebeautyofdiffused,naturallightingwiththefunctionalqualitiesofhighinsulation,shatterproofconstructionandlowmaintenance

Duracast® Textured Finish Createatexturedwallappearancewiththisdurabletexturedcoating.Availableineightstandardnaturalearthtones

Stainless SteelAstrikinglybeautifulchoiceofsubstratethatinstantlyelevatesanyprojecttoahigherechelon

TacomaPublicUtilitiesAdministrationBuildingTacoma,WAArchitect:BCRAArchitectsTacoma,WA

INTEGRATION OPTIONS

FINISH OPTIONS

9165-10 Centria.indd 4 10/14/09 12:03:03 PM10142009120628

FORMAWALL® GRAPHIX SERIES™

GRAPHIX SERIES DESCRIPTIONInsulated metal composite wall panel system

SUBSTRATE & CORE• Standard – 22/26 gage G-90 galvanized steel face and liner with

HCFC-free polyurethane or polyisocyanurate foam-insulated core• Optional gages available – consult CENTRIA• Optional – .040 Aluminum face (2” thick only), embossed*

and smooth

JOINERY• Horizontal oriented panel – Rainscreen, pressure-equalized and

drainable joinery, 1/2” nom. joint – standard• Vertical oriented panel – Double tongue-and-groove, 1/8” nom.

joint – standard• Segmented joint – 5/8” x 3/4” deep embossment with factory

applied black gasket, standard – Max. segments per panel – 12 – Min. length of segment – 1’

SURFACE FINISH• Exterior – Non-directional embossed – Smooth flat• Interior – Non-directional embossed planked or

flat – Smooth planked

PANEL WIDTH• Available from 10” to 40”

PANEL LENGTH (Steel Face)• 20’ max.

PANEL LENGTH (Aluminum Face)• Embossed, Flat – Overall Max. Length – 12’6” – Max. Length of Segment – 11’6” – Min. Length of Segment – 12” – Max. Number of Segments – 12• Smooth, Flat – Overall Max. Length – 12’6” – Max. Length of Segment – 4’ – Min. Length of Segment – 12” – Max. Number of Segments – 12

PANEL THICKNESS• 2” – standard• 3” – consult CENTRIA

* Length and reveal restrictions apply, please consult CENTRIA

Formawall® Graphix Series™ segmented construction creates the illusion of multiple smaller panels from a single large wall panel – easily and economically.

• Segments can be specified as frequently as every 12” across the length of a Formawall panel for virtually unlimited grid like design possibilities.

• Add Formawall panel reveals – 1/2” to 6” – to a Graphix Series design for even more possibilities.

• Reduced length of weather joints leads to reduced risk of leaks.• Faster erection/assembly.

NOTE: Graphix Series panels are not available with DS-59 or DS-60 panels, in stainless steel, or with a striated surface finish. Maximum panel length is 20’.

EASILY CREATE THESE COMPLEX PATTERNS FROM FEWER PANELS

The appearance of 28 individual panels is created from just five Graphix Series panels.

The appearance of nine individual panels is created from just three Graphix Series panels.

Formawall Graphix SeriesAmerican EurocopterColumbus, MSArchitect: JBHM ArchitectsColumbus, MS

165

SILVER

Unique segmented construction


VERSAWALL® & VERSAPANEL®

WALL&ROOFSYSTEMS

DESCRIPTION Insulatedmetalcompositewallandroofsystem

SUBSTRATES• Standard–26/26G-90galvanizedsteelfaceandlinerwith

HCFC-freefoaminsulatedcore• Optionalgagesavailable,consultCENTRIA

JOINERY• Doubletongue-and-groovejoinerywithfactory-appliedair

andvaporsealSurfaceFinish• VersawallExterior–Non-directionalembossing,flat,striated

orplanked.Fornon-embossedandnon-striatedconsultCENTRIA• VersapanelExterior–Non-directionalembossing,plankedorflat• Interior–Non-directionalembossing,planked• OptionalDuracasttexturedfinishisavailableforVersawall

andVersapanelwallapplications,consultCENTRIAforpanellengthoptions

PANEL WIDTH • Versawall–30”,36”• Versapanel–36”

PANEL LENGTH • 6’to40’standard• 48’max.consultCENTRIA

PANEL THICKNESS • Versawall–2”,2-3/4”nom.• Versapanel–1-3/4”,2-1/2”

“R” VALUEVersawall• 2”depth–R14• 2-3/4”–R20• 4”–R27Versapanel• 1-3/4”–R14• 2-1/2”–R19• 4”–R27R-ValuesarebasedonASTMC1363 Airfilmsareincluded.

VersawallandVersapanel(CradletoCradlecertified)insulatedmetalcompositepanelsinstallverticallytocreateawallwithadvancedthermalandmoistureprotectionproperties.Architectsenjoythesystems’abilitytoprovidelong,uninterruptedsightlines–upto48feet.Plus,VersawallandVersapanelwallpanelscanbecoatedwithCENTRIADuracast®toprovideanaturaltexturedlook.Versapanelisextra-versatile.Withitsboldstandingseam,Versapaneldoublesasahigh-performanceinsulatedroofwhencombinedwithitswatertight,snap-onbattencap.

CalTrainMaintenanceFacilitySanJose,CA

Architect:STV

LosAngeles,CA

VERSAWALL PLANKED

VERSAWALL FLAT

VERSAWALL STRIATED

VERSAPANEL PLANKED

VERSAPANEL FLAT

166


specificationsvisit

CENTRIA.com

SILVER

9165-10 Centria.indd 6 10/14/09 12:03:28 PM10142009120628

2” [51 ] or 3” [76 ]

2” [51 ] – R-143” [76 ] – R-21

36” [914 ]

12’ [3.66 ] 20’ [6.10 ]

29 -50

1

2

3

4

56

7

167

14 21

1

2

3

4

5

6

7


9165-10 Centria.indd 7 10/14/09 12:03:40 PM10142009120628

FORMABOND® WALL SYSTEM

Bartle Hall Convention Center BallroomKansas City, MOArchitect:HNTB Architecture Inc.Kansas City, MO

Unlike ordinary ACM – made by lamination, then fabricated into panels by a second party – FormaBond is manufactured entirely by CENTRIA using a proprietary reaction injection molding process. The result is a stronger, flatter, finished ACM panel, with a pressure-equalized open, dry joinery.The panels’ joinery are engineered to prohibit the entry of water without using sealants. Yet, because of its open design, this joinery also provides optimum venting to allow wall cavities to dry any residual vapor or moisture. CENTRIA also provides window, louver and sunshade components that are engineered to integrate with FormaBond panels.

DESCRIPTION Aluminum composite wall panel system

SUBSTRATE & CORE• Metal – 0.032” nominal aluminum face and liner • Core – Highly cross-linked polymer that meets

fire code requirements• 8mm sheet thickness• Smooth, Fusion, Embossed, Braided or Honeycomb

Surface Finish

JOINERYAll dry construction that is pressure equalized and provides ventilation to the inner wall cavity

PANEL WIDTH• Up to 60”

PANEL LENGTH• Up to 180”

VARIABLE REVEALS• From 1/2” to 6” in 1/2” increments. May also be colorized

COATINGS• Available in micas, metallics, and Fluorofinish

PERFORMANCE• High performance

water testing

Rout & Return Joinery

Fusion Embossed

Braided Honeycomb • Pressure-equalized joinery• AAMA 508-05

168

For complete details and

specifications visit

CENTRIA.com

CONCEPT SERIES® WALL SYSTEM

Concealed with flush clip, consult CENTRIA

The ribs of these six interchangeable panels are based on an identical asymmetrical form. Thousands of combinations of patterns, articulations, shadows and sight lines may be achieved by creatively combining these panels in either vertical or horizontal orientations.

SUBSTRATES• Standard 22-18 gage G-90 galvanized steel• Optional 24 gage CS-260 and CS-660 only• Galvalume® steel, aluminum or stainless steel – optional • Smooth or embossed surface texture

CONCEPT SERIES PROFILES • Lengths up to 30’• Concealed clips and fasteners• Stand-off clip provides ventilation cavity and continuous drain

plane behind panel • May be installed vertically or horizontally• Common joint design permits multiple profile integration• Concealed fastener extended leg option

CS-200* CS-210 CS-260

CS-620* CS-660

CONCEALED CLIP With Standoff

CONCEALED Fastener ExtendedLeg Optional

CS-610*

OPTIONS• MicroLine™ Extrusions – Slim, 2” wide aluminum trim for

finishing around windows and doors, at corners and joints, and at the head and base of walls (horizontal or vertical panel)

• MicroSeam® Corners – Perfectly seamless inside or outside corners with no welds or pop rivets

• Liner Panels – Used for creating an attractive, finished interior for a field-assembled wall

• Firewall System – Field-assembled wall systems that employ layers of gypsum to provide UL 1-hour through 4-hour firewalls

• Quietwall™ System – Field-assembled wall system with specific sound absorption or transmission loss values

*Patent No.: US D527,834; D538,948

DESCRIPTION Concealed fastener pre-formed wall panel system

Harrah’s Chester Casino & Race TrackChester, PAArchitect: SOSH ArchitectsAtlantic City, NJ

169

SILVER

Ext

erio

rE

xter

ior

Ext

erio

rE

xter

ior

Ext

erio

rE

xter

ior


IW SERIES WALLSYSTEM

Thesethirteenpanelscomeinyourchoiceofflatpanelsorwithrevealdepthsof1”,2”or6”,withorwithoutpencilbeadstiffeners.Bycombiningthesepanelsineitheraverticalorhorizontalfashion,you’reabletocreatethousandsofcombinationsofattractivewallpatternsanddesigns.

DESCRIPTION Concealedfastenerpre-formedwallpanelsystem

SUBSTRATES• Standard22-18gageG-90galvanizedsteel• Optional24gageIW-13A,IW-21AandIW-60A• Galvalume®steel,aluminumorstainlesssteel–optional• Smoothorembossedsurfacetexture

IW SERIES PROFILES • Lengthsupto30’• Horizontalorverticalwallinstallation• Lock-jointdesignofIW-10AthroughIW-41Amakes

panelsinterchangeable• 2”swagedlapsareavailableingageslighterthan18

NotavailableforIW-12A,IW-14A,IW-15AandIW-60A

IW-40A IW-41A IW-60A

OPTIONS• MicroLine™Extrusions–Slim,2”widealuminumtrim

forfinishingaroundwindowsanddoors,atcornersandjoints,andattheheadandbaseofwalls(horizontalpanelsonly)

• MicroSeam®Corners–Perfectlyseamlessinsideoroutsidecornerswithnoweldsorpoprivets

• LinerPanels–Usedforcreatinganattractive,finishedinteriorforafield-assembledwall

• FirewallSystem–Field-assembledwallsystemsthatemploylayersofgypsumtoprovideUL1-hourthrough4-hourfirewalls

• Quietwall™System–Field-assembledwallsystemwithspecificsoundabsorptionortransmissionlossvalues

IW-10A IW-11A IW-12A IW-13A IW-14A

IW-30AIW-20A IW-21A IW-31AIW-15A

1610


specificationsvisit

CENTRIA.com

SILVER

9165-10 Centria.indd 10 10/14/09 12:04:09 PM10142009120628

creo

STYLE-RIBMR3-36 BR5-36

TR4-36 ECONOLAP-3/4” ECONOLAP-1/2”

SUPER-RIB

EXPOSED FASTENER WALL & ROOF SYSTEMCENTRIA manufactures seven exposed fastener profile panels. In addition to wall panels, these versatile panels may also be used for roofing, and soffit applications, they are readily curved for walls, canopies, awnings, parapets, column and beam wraps and more. Like all CENTRIA profile panels, these panels can be mixed and matched to create virtually unlimited designs.

DESCRIPTION Exposed fastener pre-formed wall and roof panel systems

SUBSTRATES• Standard 24-18 gage G-90 galvanized steel*• Galvalume® steel, aluminum or stainless steel – optional • Smooth or embossed surface texture

EXPOSED FASTENER PROFILES • Horizontal or vertical wall installation • Wall and roof installation• Lengths up to 40’, consult CENTRIA for longer lengths

* Super-Rib is not available in 24 gage

OPTIONS• MicroLine™ Extrusions – Slim, 2” wide aluminum trim for

finishing around windows and doors, at corners and joints, and at the head and base of walls (BR5-36, Style-Rib, TR4-36 and Econolap 3/4” Horizontal only)

• MicroSeam® Corners – Perfectly seamless inside or outside corners with no welds or pop rivets (all profiles except Econolap 1/2”)

• Liner Panels – Used for creating an attractive, finished interior for a field-assembled wall

• Firewall System – Field-assembled wall systems that employ layers of gypsum to provide UL 1-hour through 4-hour firewalls

• Quietwall™ System – Field-assembled wall system with specific sound absorption or transmission loss values

• Curving is available in a wide selection of exposed fastener profiles, finishes and colors to match virtually any architectural, commercial or industrial application.

California State University, StanislausTurlock, CAArchitect: Perkins & Will ArchitectureSan Francisco, CA

1611

Ext

erio

r

Ext

erio

r

Ext

erio

r

Ext

erio

rE

xter

ior

Ext

erio

r

Ext

erio

r


1612

2 200 175

20

20

26/26

36”

1-3/4” 2-1/2” 4”

10

23

23

30

33

40

40

1/8

1/8

1/4

1/8

3/16

1/8

3/8

3/8

1/4

1/2

7/32

5/16

3/16

9/16

260 6603/4” 3-36 5-36 20

0.040”10 40

5-36

-260

-660

3/4"

3-36

40%3/8" [10 ] ]

9165-10 Centria.indd 12 10/26/09 3:33:05 PM10262009153507

SRS® STRUCTURALSTANDINGSEAMROOFSYSTEMS1613

SUBSTRATES• SRS2–24-20gage• SRS3–24-18gage• G90galvanizedsteel,Galvalume®,stainlesssteel, andaluminum

PANEL WIDTH • 12”,16”,18”

PANEL DEPTHS• SRS2 – 2”• SRS3 – 3”

PANEL LENGTH • Factory-formed–upto48’-0”max.–standard, upto60’-0”–optional• Field-formed–220’-0”max.

Oilcanningwithinindustrystandardguidelines

asdefinedbyMCAisnotacauseforrejection.SRS2

SRS3

DESCRIPTION SRS®Structuralstandingseamroofsystem

DESCRIPTION Concealedfastenerpre-formedwallpanelsystem

OTHER ROOF PROFILESARCHITECTURAL DESIGN PANELS OTHER STRUCTURAL DESIGN PANELS

SDP 175 SDP 200ADP 100

ADP 100B

ADP 100C

SRS 2 PLANKED SRS 2 PENCIL BEAD SRS 3 PLANKED

SILVER


9165-10 Centria.indd 13 10/14/09 12:04:37 PM10142009120844

DistinctivelyProtected.CENTRIA has devoted more than 100 years to the art and science of producing color coated metal

walls and roofs that impart the very best in aesthetics and performance. This includes a wide

variety of high-quality coating systems, a full palette of colors and a range of substrates and surface

textures to meet even the most demanding environmental conditions.

C ENERGY STAR® qualified cool roofing color for low* or steep* slope applications

CS ENERGY STAR qualified cool roofing color for steep* slope application

† Standard Duracast finish color. Consult CENTRIA for custom colors.

• LowSlopeRoofs:-2:12,SteepSlopeRoofs:>2:12

† †

Prismatic™ Series Colors – Fluorofinish, Duragard and Duragard Plus

Unlessspecifiedotherwise,CENTRIA will provide a standard backer coat on the reverse side of single skin panels. Color may vary.

Polyester Arctic Ice is the standard finish offering for the interior surfaces of foam panels. Other finishes available upon request.

NOTE:Becauseofthedifferencesintheformulation and application properties of spray-appliedcoatingsversuscoilcoatings,a slight color variation is likely to occur when matching coatings of these different types.

THE INDUSTRY’S WIDEST ARRAY OF COLORS

CENTRIA offers you a full array of colors

(see CENTRIA Colors brochure) including

micas and bright metallics.

CUSTOM COLOR MATCHING

CENTRIA is also equipped with the latest

color matching technology enabling us to

provide fast turnaround on even the most

unique or unusual colors.

For complete information on CENTRIA

coating systems, contact us for a copy of

our coatings brochure.

FLUOROFINISH®* A Kynar 500®,orHylar5000® coating providing good durability.

0.8mil[20micron]nominalColorCoat

0.2mil[5.1micron]nominalPrimer

Substrate

DURAGARD® PLUSApremium,highbuildarchitecturalcoatingproviding the ultimate in color retention and fade resistance.

0.8mil[20micron]nominalPolyvinylidene Fluoride Clear Coat*

0.8mil[20micron]nominalPolyvinylidene Fluoride Color Coat*

0.8mil[20micron]nominalPrimer

Substrate

Duragard®

0.8mil[20micron]nominalPolyvinylidene Fluoride Color Coat*

0.8mil[20micron]nominalPrimer

Colors shown are for preliminary selection only. Printed colors can vary from actual painted material.

Contact CENTRIA for painted metal samples before final selection.

Cost of CENTRIA coatings may vary depending on color and finish selection.

3

2

1

4

3

2

1

1

2

3

4

1

2

3

COATING SYSTEMS AND SUBSTRATES

1614


specificationsvisit

CENTRIA.com

9165-10 Centria.indd 14 10/14/09 12:04:40 PM10142009120644

SUNDANCE MICA* 2-COAT FINISHA Kynar 500®,Hylar5000®orFEVE-basedcoating providing good durability.

0.8mil[20micron]nominalColorCoat


Substrate

SUNDANCE AM–ALUMINIUM METALLIC 3-COAT FINISHAquality,durablecoatingprovidingtheiridescence and refl ectivity of a metallic surface.

0.5mil[12.7micron]nominalPolyvinylideneFluoride Clear Coat*

0.8mil[20micron]nominalPolyvinylideneFluoride Color Coat*


Substrate

DURACAST® TEXTURED FINISH SYSTEM**Factory-appliedcoatingwithnaturalaggregatematrix providing the look and feel of precast. Available exclusively for Formawall Dimension Series,FormawallGraphixSeriesandVersawallpanels.

Acrylic and Natural Aggregate Matrix

0.8mil[20micron]nominalPolyester


Substrate

** Subject to minimum quantity requirements.

VERSACOR® ULTRA PFAn excellent coating for corrosive architectural applications.

0.8mil[20micron]nominalPVDFCoat

3.0mil[75micron]nominalVersacorUltraBarrierCoatPrimer

Substrate

VERSACOR® ULTRA TF and HFA coating merging the superior corrosion resistanceoftheVersacorBarrierCoatPrimerwith the durability of a Urethane Finish.

1.5or3.0mil[38or75micron]nominalUrethane Coat

3.0mil[75micron]nominalVersacorUltraBarrierCoatPrimer

Substrate

Sundance™ Series Colors

Sundance Mica 2-coat

Sundance AM Aluminum Metallic 3-coat

Custom colors may require an additional clear and/or barrier coat. Consult CENTRIA for details.

DoveGrayLeeIvoryLightGraySlateGrayLightSeawolfSurreyBeigeLimestoneOff-White

*PolyvinylideneFluoride(PVDF)coatcontains70%Kynar500orHylar5000resin.Kynar500isaReg.TMofAtofinaChemicals,Inc.Hylar5000isaReg.TMofSolvaySolvents,Inc.GalvalumeisaReg.TMofBIECInternational,Inc.

AVAILABLE SUBSTRATES

4

3

2

1

3

2

1

3 2 1

4

3

2

1

3 2 1

WhatisReverseSideCoatingProtection?

OnCENTRIA’sProfiledSeriespanelswithaVersacorUltracoatingsystem,anadditionalVersacorBarrierCoatingPrimerisappliedtotheinteriorofthemetalsubstrate.Theneitherawashcoat,Urethanetopcoatorprimerareappliedoverthebarriercoat.Thisadditionalcoatingprotects the metal against corrosion from the interior and at lap conditions. Another reason Versacor Ultra provides superior protection.

VERSACOR® ULTRA

Apremium,highbuild,multi-layercoatingforapplicationswherecorrosionand abrasion resistance is more important.

1

2

3

4

1

2

3

4

1

2

3

1

2

3

1

2

3

Duracast

NOTE:Galvalume,StainlessandAluminummaynotbeavailableforallproductprofi les or coating systems. Consult CENTRIA sales. Galvalume offers improved heat resistance only when used unpainted.

• StandardG-90hot-dipgalvanizedsteelconformingtoASTMA924and ASTM A653 structural quality

• Galvalumesteel,unpaintedhot-dipcoatedwithaluminum-zincalloyconformingtoASTMA924andASTMA792

• StainlessSteel**,Type304AISIarchitecturalgradealloy;austenitic,non-magnetic,non-glaresurface;slightvariationinsurfacefinish

• AluminumAlloy3003or5052andforstandingseamroofpanels,3004**,availableinsmoothsurfaceasasubstrate


1615

CENTRIA products have inherent sustainable characteristics. Our products

are primarily composed of steel and other metals which have been, and can

repeatedly be, recycled. Our factory foamed insulation provides an insulation

value in excess of alternative systems saving energy cost and fuel resources.

CENTRIA also offers specific high-performance, sound-reducing products to

protect the environment from machine or process-generated noise pollution.

NORTHEAST REGION

1.800.586.1372Baltimore, MD

Phone: 410.549.6018Fax: 410.795.5984

Boston, MA

Phone: 978.779.7929Fax: 978.779.7930

Hartford, CT

Phone: 860.659.4045Fax: 860.659.4034

Newark, NJ

Phone: 917.405.6428Fax: 973.327.2426

New York, NY

Phone: 914.834.7697Fax: 914.833.1843

Philadelphia, PA

Phone: 215.643.6040Fax: 215.643.0629

Pittsburgh, PA

Phone: 412.299.8175Fax: 412.299.8016

Syracuse, NY

Phone: 315.263.0497Fax: 315.214.3753

Washington, DC

Phone: 703.406.9588Fax: 703.406.9457

SOUTH CENTRAL REGION

1.800.586.1372Atlanta, GA

Phone: 678.947.4407Fax: 678.947.4612

Charlotte, NC

Phone: 704.341.0202Fax: 704.341.0204

Cincinnati, OH

Phone: 513.793.9160Fax: 513.793.9161

Detroit, MI

Phone: 734.529.7256Fax: 734.529.7257

Greenville, SC

Phone: 864.288.9129Fax: 864.288.7401

Indianapolis, IN

Cell: 317.514.7330Fax: 317.566.9675

Memphis, TN

Phone: 901.550.0355Fax: 901.861.8144

Milwaukee, WI

Phone: 262.538.4415Fax: 262.538.4417

Sarasota, FL

Phone: 941.342.0722Fax: 941.342.8862

Western Michigan

Phone: 248.486.6867Fax: 248.486.8939

WEST REGION

1.888.745.8527Dallas, TX

Phone: 972.422.5856Fax: 972.390.9103

Denver, CO

Phone: 303.743.7430Fax: 303.743.7451

Des Moines, IA

Phone: 630.922.3303Fax: 630.922.3833

Houston, TX

Phone: 281.397.9900Fax: 281.397.6363

Minneapolis, MN

Phone: 763.577.1417Fax: 763.577.0319

Phoenix, AZ

Phone: 480.282.2799Fax: 602.997.7062

San Francisco, CA

Phone: 650.369.9400Fax: 650.369.9483

St. Louis, MO

Phone: 314.432.3434Fax: 314.432.6863

Seattle, WA

Phone: 253.460.3779Fax: 253.460.1664

Southern California (Los Angeles)

Phone: 949.589.0997Fax: 562.690.1610

www.CENTRIA.com

1.800.759.7474 1005 Beaver Grade Road, Moon Township, PA 15108-2944 Phone: 412.299.8000 Fax: 412.299.8317 Office of Business Development

Phone: 860.490.2670

Reference SWT 09/09 5M PGCopyright © 20 CENTRIA Printed in U.S.A.

10

ARCHITECTURAL METAL WALL AND ROOF SYSTEMS

Documents

Transcript of ARCHITECTURAL METAL WALL AND ROOF SYSTEMS