MAHATMA GANDHI UNIVERSITY

SCHEME AND SYLLABI

M. Tech. DEGREE PROGRAMME

APPLIED ELECTRONICS

MAHATMA GANDHI UNIVERSITY

SCHEME AND SYLLABI

FOR

M. Tech. DEGREE PROGRAMME

IN

APPLIED ELECTRONICS

(2011ADMISSION ONWARDS)

MAHATMA GANDHI UNIVERSITY

1

SCHEME AND SYLLABI FOR M. Tech. DEGREE PROGRAMME IN APPLIED ELECTRONICS

SEMESTER - I

Sl. No.

Course No. Subject

Hrs / Week Evaluation Scheme (Marks) Credits

(C) L T P Sessional

ESE Total TA CT Sub Total

1 MECAE 101 Electronic System Modelling and Design 3 1 0 25 25 50 100 150 4

2 MECAE 102 Analog Integrated Circuit Design 3 1 0 25 25 50 100 150 4

3 MECAE 103 Digital Integrated Circuit Design 3 1 0 25 25 50 100 150 4

4 MECAE 104 RF System Design 3 1 0 25 25 50 100 150 4

5 MECAE 105 Elective I 3 0 0 25 25 50 100 150 3

6 MECAE 106 Elective II 3 0 0 25 25 50 100 150 3

7 MECAE 107 Electronic System Design Lab-I 0 0 3 25 25 50 100 150 2

8 MECAE 108 Seminar I 0 0 2 50 0 50 0 50 1

Total 18 4 5 225 175 400 700 1100 25

Elective I (MECAE 105) Elective II (MECAE 106)

MECAE 105 - 1 Digital Communication System Design MEC AE 106 - 1 Communication System Modelling and Design

MECAE 105 - 2 RF Components and Circuit Design MEC AE 106 - 2 RF Antenna Design

MECAE 105 - 3 Image and Video Processing System Design MEC AE 106 - 3 Speech and Audio Processing System Design

MECAE 105 - 4 VLSI System Design MEC AE 106 - 4 Embedded System Design

L Lecture, T Tutorial, P Practical

TA Teachers Assessment (Assignments, attendance, group discussion, Quiz, tutorials, seminars, etc.)

CT Class Test (Minimum of two tests to be conducted by the Institute)

ESE End Semester Examination to be conducted by the University

Electives: New Electives may be added by the department according to the needs of emerging fields of technology. The name of the elective and its syllabus should be submitted to the University before the course is offered.

2

SEMESTER - II

Sl. No.

Course No. Subject

Hrs / Week Evaluation Scheme (Marks) Credits

(C) L T P Sessional

ESE Total TA CT Sub Total

1 MECAE 201 Electronic Product Design 3 1 0 25 25 50 100 150 4

2 MECAE 202 Analog and Data Conversion System Design 3 1 0 25 25 50 100 150 4

3 MECAE 203 High Speed Digital System design 3 1 0 25 25 50 100 150 4

4 MECAE 204 DSP Algorithm and Architecture Design 3 1 0 25 25 50 100 150 4

5 MECAE 205 Elective III 3 0 0 25 25 50 100 150 3

6 MECAE 206 Elective IV 3 0 0 25 25 50 100 150 3

7 MECAE 207 Electronic System Design Lab-II 0 0 3 25 25 50 100 150 2

8 MECAE 208 Seminar II 0 0 2 50 0 50 0 50 1

Total 18 4 5 225 175 400 700 1100 25

Elective III (MECAE 205) Elective IV (MECAE 206)

MECAE 205 - 1 Wireless Communication System Design MECAE 206 - 1 Optical Communication System Design

MECAE 205 - 2 RF Integrated Circuit Design MECAE 206 - 2 RF and Microwave Network Design

MECAE 205 - 3 DSP System Design MECAE 206 - 3 Detection and Tracking System Design

MECAE 205 - 4 ASIC Design MECAE 206 - 4 Embedded Network Design

L Lecture, T Tutorial, P Practical

TA Teachers Assessment (Assignments, attendance, group discussion, Quiz, tutorials, seminars, etc.)

CT Class Test (Minimum of two tests to be conducted by the Institute)

ESE End Semester Examination to be conducted by the University

Electives: New Electives may be added by the department according to the needs of emerging fields of technology. The name of the elective and its syllabus should be submitted to the University before the course is offered.

3

SEMESTER - III

Sl. No. Course No. Subject

Hrs / Week Evaluation Scheme (Marks) Credits

(C) L T P Sessional ESE**

(Oral) Total TA* CT Sub Total

1 MECAE 301 Industrial Training or Industrial Training and Mini Project

0 0 20 50 0 50 100 150 10

2 MECAE 302 Masters Thesis Phase - I 0 0 10 100*** 0 100 0 100 5

Total 0 0 30 150 0 150 100 250 15

* TA based on a Technical Report submitted together with presentation at the end of the Industrial Training and Mini Project

** Evaluation of the Industrial Training and Mini Project will be conducted at the end of the third semester by a panel of examiners, with at least one external examiner, constituted by the University.

*** The marks will be awarded by a panel of examiners constituted by the concerned institute

SEMESTER - IV

Sl. No. Course No. Subject

Hrs / Week Evaluation Scheme (Marks) Credits

(C) L T P Sessional ESE

**

(Oral &

Viva) Total

TA* CT Sub Total

1 MECAE 401 Masters Thesis 0 0 30 100 0 100 100 200 15

2 MECAE 402 Masters Comprehensive Viva 100 100

Total 30 100 0 100 200 300 15

Grand Total of all Semesters 2750 80

* 50% of the marks to be awarded by the Project Guide and the remaining 50% to be awarded by a panel of examiners, including the Project Guide, constituted by the Department

** Thesis evaluation and Viva-voce will be conducted at the end of the fourth semester by a panel of examiners, with at least one external examiner, constituted by the University.

4

MECAE 101 ELECTRONIC SYSTEM MODELLING AND DESIGN

L T P C 3 1 0 4

Module 1: Representation of Systems Electrical / Mechanical / Hydraulic / Acoustic Systems: Transfer Function Vs. State Space Representation, Numerical Methods and Discretization. Linear Systems: Methods of Model Order Determination, Impulse and Frequency Response Methods. Time Varying (Linear) Systems: Stability Concepts, Fractal Behaviour. Nonlinear Models: Introduction to Stable Oscillations, Chaotic Behaviour, Jump Phenomena.

Module 2: Modelling, Identification and Simulation Linear Modelling, Identification and Simulation: Least Squares Identification Methods; Off-Line and On-Line, Applications of LS and ARMA Methods, Regression Methods. Introduction to Non Linear Modelling, Identification and Simulation: Examples of Non Linear Models and Methods of Nonlinear Identification.

Module 3: Analog and Digital Circuit Simulator Algorithms Basic flow of the Circuit Simulators: Inputs and Outputs. Simulation Algorithms: Modified Nodal Analysis, LU Decomposition, Sparse Matrix Algorithms, Newton-Raphson Iterative Techniques, and Numerical Integration. Convergence Issues and Simulation Accuracy. Basics of Logic Simulation: Event Queues and Event-Driven Simulation Techniques.

Module 4: Modelling With Hardware Description Languages Semantics of representing Mixed-Signal Circuit behaviour, Modelling Conservation Laws, Implicit Relationships, Multi-Dimensional Observed Phenomena, and Multiple Technology Domains (Thermal, Electrical, Mechanical, etc.). Operations for Moving from Analog to Digital and vice-versa: Thresholding to obtain an event from an Analog Quantity, Ramping to convert an event into an Analog Quantity. Analysis of Mixed-Signal Circuits and Systems: Basic and Advanced Analysis Capabilities in the State-of-the-Art Simulators: AC, DC, Transient, Noise, Distortion Analysis and Stress, Sensitivity, and Failure Modes and effects

5

References: 1. Najm F. N., Circuit Simulation, John Wiley & Sons, 2010. 2. Frank L. Severance, System Modelling and Simulation: An Introduction, Wiley,

2001.

3. Ashenden P., Peterson, G. & Teegarden D., The System Designers Guide to VHDL-AMS, Morgan-Kaufman, 2003.

4. Vlach J. & Singhal K., Computer Methods for Circuit Analysis and Design, 2nd Ed., Kluwer Academic Publishers, 2003.

5. Pillage L. T., Rohrer R. A. & Visweswariah C., Electronic Circuit and System Simulation Methods, McGraw Hill, 1995.

6

MECAE 102 ANALOG INTEGRATED CIRCUIT DESIGN L T P C 3 1 0 4

Module 1: MOSFET Operation and Models for Analog Design MOSFET Capacitance Overview / Review, Threshold Voltage, I-V Characteristics of MOSFETs. Models for Analog Design: Long-Channel MOSFETs, Square-Law Equations, Small Signal Models, Temperature Effects, Short-Channel MOSFETs, General Design, MOSFET Noise Modeling.

Module 2: Current Mirrors and Single-Stage Amplifiers Current Mirrors: Basic Current Mirror: Long-Channel Design, Matching Currents in the Mirror, Biasing the Current Mirror, Short-Channel Design, Temperature Behaviour, Biasing in the Subthreshold Region. Cascoding the Current Mirror: Simple Cascode, Low-Voltage (Wide-Swing) Cascode; Wide-Swing, Short-Channel Design, Regulated Drain Current Mirror. Biasing Circuits: Long-Channel Biasing Circuits, Short-Channel

Biasing Circuits.

Amplifiers: Gate-Drain Connected Loads: Common-Source Amplifiers, Source Follower, Common-Gate Amplifier. Current Source Loads: Common-Source Amplifier, Cascode Amplifier, Common-Gate Amplifier, Source Follower. Push-Pull Amplifier: DC Operation and Biasing, Small-Signal Analysis, Distortion.

Module 3: Differential Amplifiers and Voltage References Differential Amplifiers: Source-Coupled Pair: DC Operation, AC Operation, CMRR, Matching Considerations, Noise Performance, Slew-Rate Limitations. Source Cross-Coupled Pair: Operation of the Diff-Amp, Current Source Load, Cascode Loads. Wide-Swing Differential Amplifiers: Current Differential Amplifier, Constant Transconductance Diff-Amp.

Voltage References: MOSFET-Resistor Voltage References: Resistor-MOSFET Divider, MOSFET-Only Voltage Divider, Self-Biased Voltage References. Parasitic Diode-Based References: Long-Channel BGR Design, Short-Channel BGR Design.

Module 4: Operational Amplifiers One-Stage and Two-Stage Op-Amps: Low-Frequency, Open Loop Gain, Input Common-Mode Range, Power Dissipation, Output Swing and Current Source / Sinking Capability,

7

Offsets. Compensating the Op-Amp: Gain and Phase Margins, Compensation for High-Speed Operation, Slew-Rate Limitations. CMRR and PSRR. Op-Amp with Output Buffer; Operational Transconductance Amplifier; OTA with Output Buffer, Folded-Cascode OTA. Gain-Enhancement, Three-Stage Op-Amp Design.

References: 1. Jacob Baker R., CMOS: Circuit Design, Layout, and Simulation, Wiley, 2010. 2. Philip E. Allen & Douglas R. Holberg, CMOS Analog Circuit Design, 2nd Ed.,

Oxford University Press, 2009. 3. Behzad Razavi, Design of Analog CMOS Integrated Circuits, McGraw Hill Higher

Education, 2003. 4. David A. Johns & Ken Martin, Analog Integrated Circuit Design, Wiley India Pvt.

Ltd., 2008. 5. Paul R. Gray, Paul J. Hurst, Stephen H. Lewis & Robert G. Meryer, Analysis and

Design of Analog Integrated Circuits, 5th Ed., Wiley 2009. 6. Richard C. Jaeger & Travis N. Blalock, Microelectronic Circuit Design with CD-

ROM, 2nd Ed., McGraw Hill, 2003.

8

MECAE 103 DIGITAL INTEGRATED CIRCUIT DESIGN L T P C 3 1 0 4

Module 1: CMOS Inverter Issues in Digital Integrated Circuit Design, Quality Metrics of a Digital Design, Cost of an Integrated Circuit, Functionality and Robustness, Performance, Power and Energy Consumption. Static CMOS Inverter: Static Behavior, Switching Threshold, Noise Margins. Performance of CMOS Inverter: Dynamic Behavior, Computing the Capacitances, Propagation Delay: First-Order Analysis, Propagation Delay from a Design Perspective, Power, Energy, and Energy-Delay, Dynamic Power Consumption, Static Consumption, Analyzing Power Consumption using SPICE, Perspective: Technology

Scaling And its Impact on the Inverter Metrics

Module 2: Designing Combinational Logic Gates in CMOS Static CMOS Design, Complementary CMOS, Ratioed Logic, Pass-Transistor Logic, Dynamic CMOS Design, Dynamic Logic: Basic Principles, Speed and Power Dissipation of Dynamic Logic, Issues in Dynamic Design, Cascading Dynamic Gates, Perspectives: How To Choose A Logic Style? Designing Logic for Reduced Supply Voltage.

Module 3: Designing Sequential Logic Circuits Timing Metrics for Sequential Circuits, Classification of Memory Elements, Static

Latches and Registers, Bistability Principle, Multiplexer-Based Latches, Master-Slave Edge-Triggered Register, Low-Voltage Static Latches, Static SR Flip-Flops, Dynamic Latches and Registers, Dynamic Transmission-Gate Edge-Triggered Registers, CMOS - Clock-Skew Insensitive Approach, True Single-Phase Clocked Register (TSPCR), Alternative Register Styles, Pulse Registers, Sense-Amplifier Based Registers, Pipelining: An Approach to Optimize Sequential Circuits, Latch Vs. Register-Based Pipelines, NORA-CMOS - Logic Style for Pipelined Structures, Non-Bistable Sequential Circuits, Schmitt Trigger, Monostable Sequential Circuits, Astable Circuits, Perspective: Choosing a Clocking Strategy.

Module 4: Timing Issues in Digital Circuits Timing Classification of Digital Systems, Synchronous Interconnect, Mesochronous

Interconnect, Plesiochronous Interconnect, Asynchronous Interconnect, Synchronous Design: Synchronous Timing Basics, Sources of Skew and Jitter, Clock-Distribution

9

Techniques, Latch-Based Clocking, Self-Timed Circuit Design, Self-Timed Logic - Asynchronous Technique, Completion-Signal Generation, Self-Timed Signaling, Practical Examples of Self-Timed Logic.

Synchronizers and Arbiters: Synchronizers - Concept and Implementation, Arbiters, Clock Synthesis and Synchronization using A Phase-Locked Loop: Basic Concept, Building Blocks of a PLL, Distributed Clocking using DLLs.

References: 1. Jan M. Rabaey, Anantha Chandrakasan & Borivoje Nikolic, Digital Integrated

Circuits: A Design Perspective, 2nd Ed. Pearson Education Asia, 2007. 2. Jacob Baker R., CMOS: Circuit Design, Layout, and Simulation, Wiley, 2010. 3. Ken Martin, Digital Integrated Circuit Design, Oxford University Press, 1999. 4. Sung-Mo (Steve) Kang & Yusuf Leblebici, CMOS Digital Integrated Circuits

Analysis and Design, 3rd Ed., McGraw Hill, 2002. 5. David Hodges, Horace Jackson & Resve Saleh, Analysis and Design of Digital

Integrated Circuits, 3rd Ed., McGraw Hill, 2003. 6. Hubert Kaeslin & Eth Zrich, Digital Integrated Circuit Design from VLSI

Architectures to CMOS Fabrication, Cambridge University Press, 2008.

10

MECAE104 RF SYSTEM DESIGN L T P C 3 1 0 4

Module 1: Transmission Line Theory Review of Transmission Line Theory: Lumped Element Model, Field Analysis of Transmission Lines, Terminated Lossless Lines, SWR, and Impedance Mismatches. Planar Transmission-Lines: Stripline, Microstrip, Coplanar-Line.

Smith Chart: Reflection Coefficient, Load Impedance, Impedance Transformation, Admittance Transformation, Parallel and Series Connection. Revision of S-Parameters.

Module 2: RF Filter Design Overview; Basic Resonator and Filter Configuration, Special Filter Realizations, Filter Implementations, Coupled Filter.

Module 3: Impedance Matching Networks Impedance Matching using Discrete Components, Microstripline Matching Networks, Single Stub Matching Network , Double Stub Matching Network. Quarter-Wave Transformers, Multi-Section and Tapered Transformers.

Module 4: RF Amplifiers, Oscillators and Mixers Characteristics; Amplifier Power Relations, Stability Considerations, Constant Gain Circles, Noise Figure Circles, Constant VSWR Circles, Low Noise Circuits; Broadband, High Power and Multistage Amplifiers. Basic Oscillator Model, High Frequency Oscillator Configurations, Basic Characteristics of Mixers.

References: 1. Reinhold Ludwig & Powel Bretchko, RF Circuit Design Theory and Applications,

1st Ed., Pearson Education Ltd., 2004. 2. David M. Pozzar , Microwave Engineering, 3r Ed., Wiley India, 2007. 3. Mathew M. Radmanesh, Radio Frequency and Microwave Electronics, 2nd Ed.

Pearson Education Asia, 2006. 4. Mathew M. Radmanesh, Advanced RF & Microwave Circuit Design-The Ultimate

Guide to System Design, Pearson Education Asia, 2009.

11

5. Ulrich L. Rohde & David P. NewKirk, RF / Microwave Circuit Design, John Wiley & Sons, 2000.

6. Davis W. Alan, Radio Frequency Circuit Design, Wiley India, 2009. 7. Christopher Bowick, John Blyer & Cheryl Ajluni RF Circuit Design, 2nd Ed.,

Newnes, 2007. 8. Cotter W. Sayre, Complete Wireless Design, 2nd Ed., McGraw-Hill, 2008. 9. Joseph J. Carr, RF Components and Circuits, Newnes, 2002.

12

MECAE 105 - 1 DIGITAL COMMUNICATION SYSTEM DESIGN L T P C 3 0 0 3

Module 1: Overview of Communication System Overview of a Communication System: Channel, and Performance Issues; Review of Signal Classification and Characteristics. Operations on Signals: Correlation, Orthogonality.

Analysis and Transmission of Signals: Fourier Series, Fourier Transform; Signal Transmission through a Linear System: Distortion, Energy and Power Spectral Density. Sampling, Pulse-Amplitude Modulation, Time-Division Multiplexing, Quantization, Pulse-Code Modulation, Matched Filter, Inter Symbol Interference, Channel Equalization, Adaptive Equalizer.

Module 2: Signaling and Modulation Communication System in AWGN Noise, Binary PSK and FSK Systems, M-ary Pulse Amplitude Modulation, Signal Space Representation, Geometric Representation of Signals. Two-Dimensional M-ary Signaling: M-PSK and M-QAM. M-dimensional M-Ary Signaling: M-FSK and OFDM. Band Pass and Band Limited Digital Modulation. Effect of Noise on Communication Systems, Properties and Representation of Noise.

Module 3: Channels Wireless (Multipath) Channel Models, Classification of Wireless Channel Models. Frequency Selectivity and Multipath Fading. Digital Modulations for Flat-Fading Channels, Signaling for Flat-Fading Channels: Error Control Coding. Digital Modulations for Frequency-Selective Channels. Signaling for Frequency-Selective Channels:

Equalization, OFDM.

Module 4: Diversity Techniques Spatial Receive Diversity Techniques for Multipath Channels, Spatial Transmit Diversity

Techniques for Multipath Channels, MIMO Systems.

References: 1. John G. Proakis & Masoud Salehi, Digital Communications," 5th Ed., McGraw Hill,

2008.

2. Rice M., Digital Communications: A Discrete-Time Approach, Prentice-Hall, 2009.

13

3. Barry J. R., Lee E. A. & Messerschmitt D. G., Digital Communication, 3rd Ed., Kluwer Academic Publishers, 2004.

4. Ha H. Nguyen & Ed Shwedyk, A First Course in Digital Communication, Cambridge University Press, 2009.

5. Tri T. Ha, Theory and Design of Digital Communication Systems, California Cambridge University Press, 2010.

6. Simon M. K., Hinedi S. M. & Lindsey W. C., Digital Communication Techniques-Signal Design and Detection, Prentice Hall, 1995.

7. John G. Proakis & Masoud Salehi, Fundamentals of Communication Systems, Prentice Hall, 2005.

8. Anderson J. B. & Svensson A., Coded Modulation Systems, Kluwer Academic / Plenum Publishers, 2003.

9. John B. Anderson, Digital Transmission Engineering, Wiley Inter-Science, 2005. 10. Stark H. & Woods J.W., Probability and Random Processes with Applications to

Signal Processing, 3rd Ed., Prentice Hall, 2002. 11. Papoulis A. & Pillai S.U., Probability, Random Variables and Stochastic Processes,

McGraw Hill, 2002.

14

MECAE 105 - 2 RF COMPONENTS AND CIRCUIT DESIGN L T P C 3 0 0 3

Module 1: RF Components Introduction; Cascaded Linear Two-Port Networks, Signal Flow Graph, Noise in Two-Port Network, Non-Linear Two-Port Networks. Importance of RF Design, RF

Behaviour of Passive Components, Chip Components and Circuit Board Considerations. Active RF Components: RF Diodes - Schottky Diode, PIN Diode, Varactor Diode, IMPATT, TRAPATT, BARRIT and Gunn Diodes, Tunnel Diode, Noise Diode, Snap Diode. Microwave Transistor Issues: Silicon Vs. GaAs. Noise Sources, S-Parameters, Noise Figure Parameters. RF Field Effect Transistors, High Mobility Transistors.

Module 2: Active RF Components Modelling Diode Models: Non Linear Diode Model, Linear Diode Model. Transistor Models: Large Signal BJT Models, Small Signal BJT Models, Large Signal FET Models, Small Signal FET Models. Scattering Parameter Device Characterization.

Module 3: Microwave Control Components Introduction; Switches: PIN Diode Switches, FET Switches, MEMS Switches, Alternative Multi Port Switch Structure. Variable Attenuators, Phase Shifters: True Relay and Slow Wave Phase Shifters, Reflection Phase Shifters, Stepped Phase Shifters, Binary Phase Shifters.

Module 4: Microwave Circuit Technology Introduction; Hybrid and Monolithic Integrated Circuits, High Frequency PCB, Hybrid MICs, MMICs, Advanced Hybrid MICs, Parasitic elements associated with Physical Devices. Basic MMIC Elements: Transmission Lines, Via Holes, Resistors, Inductors, Capacitors, Semiconductor Devices. Simulation Models: Single Element Models, Scalable Models, Non Linear Models, MMIC Statistical Models, Temperature Models. MMIC Production Techniques: Lithography, On-Wafer Testing, Cut and Selection.

References: 1. Reinhold Ludwig & Powel Bretchko, RF Circuit Design Theory and Applications,

2nd Ed., Prentice Hall Ltd., 2008. 2. Sorrentino R. & Bianchi G., Microwave and RF Engineering, John Wiley, 2010.

15

3. Cotter W. Sayre, Complete Wireless Design, 2nd Ed., McGraw Hill, 2008. 4. Coleman C., An introduction to Radio Frequency Engineering, Cambridge, 2004. 5. Mathew M. Radmanesh, Advanced RF & Microwave Circuit Design The Ultimate

Guide to System Design, Pearson Education Asia, 2009. 6. David M. Pozzar , Microwave Engineering, 3rd Ed., Wiley India, 2007. 7. Jia-Sheng Hong, Lancaster M. J. & Waun Ed. Hong, Microstrip Filters for RF /

Microwave Applications, Wiley Interscience, 2001. 8. Inder Bahl, Lumped Elements for RF and Microwave Circuits, Artech House, 2003. 9. Joseph J. Carr, RF Components and Circuits, Newnes, 2002. 10. Guillermo Gonzalez, Microwave Transistor Amplifiers: Analysis and Design,

Prentice Hall, 1997. 11. Inder Bahl, Fundamentals of RF and Microwave Transistor Amplifiers, John Wiley

& Sons, 2009.

16

MECAE 105 - 3 IMAGE AND VIDEO PROCESSING SYSTEM DESIGN

L T P C 3 0 0 3

Module 1: Image and Video Basics Human System of Sight, Basic Laws of Perception, Colour and its Representation. Fourier Transforms and their Applications in Image Processing. Sampling, Aliasing, Linear Filters, Image Quantization, Image Equalization. Concepts of Probabilities applied to Images. Mathematical Morphology: Basic Operations, Mathematical Morphology Filters. Notions of the Theory of Information.

Analog Video and PAL / NTSC Systems, Space-Time Sampling, Video Processing Applications. Conversion from Interlaced to Progressive, Conversion of Frame-Rate. Video Filtering by Motion Compensation, Noise Reduction and Restoration in Videos. Object Following, Error Resiliency, Video Digital Signature.

Module 2: Image and Video Enhancement Spatial Domain Vs. Frequency Domain, Enhancement via Point Operations: Contrast

Stretching, Colormap Look-Up Tables, Clipping, Thresholding, Negation, Gray-Level Slicing, Bit-Plane Slicing, Range Compression, Algebraic Operators. Enhancement via Histogram Modeling: Histogram Modification, Histogram Equalization, Histogram Specification. Processing via Algebraic Operations: Input And Output Histograms, Sums and Differences of Images, Averaging Noisy Images, Background Removal, Change or Motion Detection. Processing Via Spatial Operations: Weighted Local Area Smoothing or Averaging, Derivative Filters, Sharpening Filters, Median Filtering, Gray Level Interpolation, Spatial Transformations.

Module 3: Image and Video Encoding Systems General Block Diagram of an Image and Video Encoding System, Human Sight System: Application to Image and Video Encoding. Analysis of Images and Video, Discrete Cosine Transform. Basic Principles of Wavelet Transform. Predictive Coding, Transform Coding, Resolution Pyramids and Sub Band Coding, Interframe Coding. 2-D Motion Estimation: Optical Flow, Calculation of Optical Flow General Methodologies, Pixel Based Motion Estimation, Block Matching Algorithm, Mesh-Based Motion Estimation, Global Motion Estimation, Region Based Motion Estimation, Multi Resolution Motion Estimation. Application of Motion Estimation in Video Coding. Still

17

Image Compression Standards: JPEG and JPEG 2000. Comparison with other Formats of Still Image. Video Compression Standards: H.261, MPEG-1/2 and Others.

Module 4: Three Dimensional Vision Affine and Metric Geometry, 2D and 3D Geometrical Transformations, Representation of Perspective. Basic Concepts of Projective Geometry of Planes and Spaces. 2-D Homography Estimations. Models of Cameras, Camera Calibration, Epipolar Geometry. Calculation of the Fundamental Matrix, Image Rectification. Three-Dimensional Reconstruction of a Scene. Scene Plans and Homographies. Trifocal Tensor. Geometry of Three or More Views.

References: 1. Murat Tekalp A., Digital Video Processing, Prentice Hall, 1996. 2. Iain E. Richardson, Video Codec Design: Developing Image and Video Compression

Systems, Wiley Interscience, 2002.

3. Yao Wang, Jorn Ostermann & Ya-Qin Zhang, Video Processing and Communications, Prentice Hall, 2002.

4. Richard Szeliski, Computer Vision: Algorithms and Applications, Springer, 2010. 5. Boguslaw Cyganek & Paul Siebert J., An Introduction to 3D Computer Vision

Techniques and Algorithms, Wiley Inter Science, 2009. 6. Yi Ma, Stefano Soatto, Jana Kosecka, & Shankar Sastry, An Invitation to 3-D Vision

- From Images to Geometric Models, Springer-Verlag, 2004. 7. Forsythe D. & Ponce J., Computer Vision: A Modern Approach, Prentice-Hall,

2003. 8. Richard Hartley & Andrew Zisserman, Multiple View Geometry in Computer

Vision, 6th Ed., Cambridge University Press, 2008.

18

MECAE 105 - 4 VLSI SYSTEM DESIGN L T P C 3 0 0 3

Module 1: Introduction to CMOS VLSI Design Introduction to Digital IC Design: Custom and Semicustom Flow, MOSFET Models, MOSFET Capacitances, Transistors and Layout. CMOS Inverter: Effect of Process Variation, Supply Scaling, Inverter Design for a given VTC and Speed, Effect of Input Rise Time and Fall Time, Static and Dynamic Power Dissipation, Energy and Power Delay Product, Sizing Chain of Inverters, Latch Up Effect. Simulation of Static and Dynamic Characteristics. CMOS Layout Elements: Parasitics, Wires and Vias, Design Rules, Layout Design. SPICE Simulation of MOSFET I-V Characteristics and Parameter Extraction Post Layout Simulation.

Module 2: Static and Dynamic CMOS Design Static CMOS Design: Complementary CMOS, Static Properties, Propagation Delay,

Elmore Delay Model, Power Consumption, Low Power Design Techniques, Logical Effort for Transistor Sizing, Ratioed Logic, Pseudo NMOS Inverter, DCVSL, PTL, DPTL & Transmission Gate Logic. Dynamic CMOS Design: Speed and Power Considerations, Domino Logic and Its Derivatives, C2MOS, TSPC Registers, NORA CMOS. Combinational Logic Synthesis: Technology Independent and Technology Dependent Optimization.

Module 3: Subsystem Design and Timing Issues Subsystem Design Principles: Pipelining, Data Paths in Processor Architecture, Standard Cell Layout, Logic Design Considerations of Adder, Multiplier, Shifter. Sequencing Static Circuits, Circuit Design of Latches and Flip Flops, Static Sequencing Element Methodology, Sequencing Dynamic Circuits, Synchronizers. CMOS Memory Design: SRAM and DRAM. BiCMOS Logic: Static and Dynamic Behaviour, Delay and Power Consumption in BiCMOS Logic. Timing: Slack Delay Model, Effect of Skew and Jitter on Timing, Sources of Skew and Jitter, Clocking Disciplines, Wire Model, Technology Scaling Effect on Interconnect and Noise in Interconnects.

Module 4: Routing, Scheduling and Allocation Partitioning, Floor Planning and Pin Assignment, Slicing Tree, Channel Definition, Channel Routing Order, Wind Mill Constraint, Placement, Special Routing, Clock

19

Routing for Regular and Irregular Structures, Power Routing, Global Routing, Line Probe Algorithm, Maze Routing, Detail Routing, Left Edge Algorithm, Vertical Constraint, Switch Box Routing. Logic Synthesis, High Level Synthesis. Scheduling and Allocation: ASAP and ALAP Scheduling, Register Allocation, Functional Unit Allocation, Interconnect Path Allocation. Hardware Description Languages: Synthesis, Register Transfer Design, Event Driven Simulation. FPGA Logic Element and Interconnect Architecture, Logic Synthesis for FPGA, Physical Design for FPGA, I / O Circuits, ESD Protection, Off Chip Connections.

References: 1. Weste & Harris CMOS VLSI Design, 3rd Ed., Pearson Education, 2005. 2. Jan M. Rabae, Digital Integrated Circuits - A Design Perspective, 2nd Ed., Prentice

Hall, 2005. 3. Uyemura J. P, Introduction to VLSI Circuits and Systems, Wiley, 2002. 4. Wayne Wolf, FPGA-Based System Design, Pearson, 2009. 5. James R. Armstrong & Gail Gray F., VHDL Design Representation and Synthesis,

Pearson Education, 2007. 6. Naveed A. Sherwani, Algorithms for VLSI Physical Design Automation, 3rd Ed.,

Springer, 1999.

20

MECAE 106 - 1 COMMUNICATION SYSTEM MODELLING AND DESIGN

L T P C 3 0 0 3

Module 1: Modelling of Communication Systems Model of Speech and Picture Signals, Pseudo Noise Sequences, Non-Linear Sequences, Analog Channel Model, Noise and Fading, Digital Channel Model: Gilbert Model of Bursty Channels, HF, Troposcatter and Satellite Channels, Switched Telephone Channels, Analog and Digital Communication System Models, Light Wave System Models.

Module 2: Simulation of Random Variables and Random Process Univariate and Multivariate Models, Transformation of Random Variables, Bounds and Approximation, Random Process Models: Markov and ARMA Sequences, Sampling Rate for Simulation, Computer Generation and Testing of Random Numbers.

Module 3: Estimation of Performance Measures Quality of an Estimator, Estimator for SNR, Probability Density Functions of Analog Communication System, BER of Digital Communication Systems, Monte Carlo Method and Importance of Sampling Method, Estimation of Power Spectral Density

Module 4: Communication Networks Queuing Models, M/M/I and M/M/I/N Queues, Little Formula, Burke's Theorem, M/G/I Queue, Embedded Markov Chain Analysis of TDM Systems, Polling, Random Access Systems.

Network of Queues: Queues in Tandem, Store and Forward Communication Networks, Capacity Allocation, Congestion and Flow Chart, Routing Model, Network Layout and Reliability.

References: 1. Jeruchim M. C., Philip Balaban & Sam Shanmugan K., "Simulation of

Communication Systems", 2nd Ed., Kluwer Academic Publishers, 2002. 2. Law A. M., "Simulation, Modelling and Analysis", 3rd Ed., Tata McGraw Hill, 2007. 3. Hayes J. F., Modeling and Analysis of Computer Communication Networks, Kluwer

Academic Publishers, 2002. 4. Jerry Banks, John S. Carson & Barry L Nelson, Discrete-Event System Simulation,

4th Ed., Dorling Kindersley (India) Pvt. Ltd., 2007.

21

MECAE 106 - 2 RF ANTENNA DESIGN L T P C 3 0 0 3

Module 1: Microstrip Radiators Introduction; Advantages and Limitations of Microstrip Antenna, Radiation Mechanism of a Microstrip Antenna, Various Microstrip Antenna Configurations, Microstrip Patch Antenna, Printed Dipole Antenna, Printed Slot Antenna, Feeding Techniques and Modeling, Coaxial Feed / Probe Coupling, Microstrip (Coplanar) Feed, Proximity Coupled Microstrip Feed, Aperture Coupled Microstrip Feed, Coplanar Waveguide Feed, Radiation Fields.

Module 2: Rectangular Microstrip Antenna Introduction; Models of Rectangular Patch Antenna, Transmission Line Model Analysis , Cavity Model Analysis, Design Considerations of Rectangular Patch Antenna, Substrate Selection, Element Width and Length, Radiation Pattern and Radiation Resistance, Loss Factor, Bandwidth, Radiation Efficiency, Feed Location and Polarization.

Module 3: Circular Microstrip Antenna Introduction; Analysis of a Circular Disk Microstrip Antenna Using Cavity Model, Design Considerations: Substrate Selection, Radiation Pattern, Quality Factor and Impedance Bandwidth, Feed Point Location and Polarization.

Module 4: A. Broad Banding of Microstrip Antennas Introduction; Effect of Substrate Parameters on Bandwidth, Selection of Suitable Patch Shape, Selection of Suitable Feeding Technique, Aperture-Coupled Microstrip Antenna.

B. Compact Microstrip Antennas Introduction; Use of a Shorted Patch with a Thin Dielectric Substrate, Use of a Meandered Patch, Use of a Meandered Ground Plane, Use of a Planar Inverted-L Patch, Use of an Inverted U-Shaped or Folded Patch.

References: 1. Bhartia P., Inder Bahl, Garg R. & Ittipiboon A., Microstrip Antenna Design

Handbook, Artech House Publishers, 2001. 2. Kin-Lu Wong, Compact and Broadband Microstrip Antennas, 1st Ed., Wiley-Inter

science, 2002.

22

3. Fang D.G., Antenna Theory and Microstrip Antennas, CRC Press, 2009. 4. Simon R. Saunders & Alejandro Aragon-Zavala, Antennas and Propagation for

Wireless Communication System, John Wiley & Sons, 2007.

23

MECAE 106 - 3 SPEECH AND AUDIO PROCESSING SYSTEM DESIGN

L T P C 3 0 0 3

Module 1: Review of Audio Sources and Propagation Waves, Waveguides and Environmental Characteristics. Human Speech and Hearing: Human Speech Generation Mechanism, Speech Signal Characteristics. Human Hearing System: Ear, Auditory Physiology, Human Hearing Characteristics, Psychophysics, Perceptual Issues, Auditory Scene Analysis.

Sound and Music Processing: Time Domain Methods - Time Domain Parameters of Speech and Music Signal, Methods for Extracting the Parameters: Energy, Average Magnitude, Zero Crossing Rate. Silence Discrimination using ZCR and Energy, Short Time Auto Correlation Function, Pitch Period Estimation using Auto Correlation Function.

Module 2: Frequency Domain Methods Short Time Fourier Analysis: Fourier Transform and Linear Filtering Interpretations, Sampling Rates, Spectrographic Displays, Pitch and Formant Extraction, Analysis by Synthesis, Analysis-Synthesis Systems: Phase Vocoder, Channel Vocoder, Homomorphic Speech Analysis: Cepstral Analysis of Speech, Formant and Pitch Estimation, Homomorphic Vocoder, Spectral Modelling of Music Signals, Sinusoidal Plus Residual Modelling of Music Signals, Extraction of Perceptual Attributes of Music Signals, Music Applications Based on Audio Processing.

Module 3: Voice and Audio Encoding Systems General Block Diagram of a Voice and Audio Encoding System; Human Auditory System: Application to Voice and Audio Encoding. Analysis of Audio and of Music; Predictive Encoding, Discrete Cosine Transform, Sub-Band Analysis, Bit Localization Strategies, Rate / Distortion Techniques, Encoding in The Time Domain, PCM Encoding, Predictive Encoding, Encoding in the Frequency Domain; MPEG-1 Audio, MPEG-2 Audio and MPEG-2 AAC, MPEG-4 Audio, Dolby AC-3 Audio; Applications: Voice over IP.

24

Module 4: Real Time Audio Processing Sampling, Time Resolution, Buffering, Latency and Jitter; Synchronous Vs. Asynchronous Models in the Generation and Processing of Real Time Interactive Sound; Aspects of Control and of Mapping; Visual Data Flow"-Type Programming Languages for Real Time Audio; Communication Protocols (MIDI, UDP Vs. TCP, OSC); Music Analysis & Recognition: Transcription, Summarization, and Similarity; Sound Mixtures and Separation: CASA, ICA, and Model-Based Separation.

References: 1. Thomas F. Quatieri, Discrete-Time Speech Signal Processing, Pearson Education,

2004.

2. Nelson Morgan & Ben Gold, Speech and Audio Signal Processing: Processing and Perception of Speech and Music 1999.

3. Martin Russ, Sound Synthesis and Sampling, Focal Press, Elsevier, 2004. 4. John Watkinson, The Art of Digital Audio, Focal Press, Elsevier, 2001. 5. Deller J. R., Hansen J. H. L. & Proakis J. G., Discrete Time Processing of Speech

Signals, John Wiley, IEEE Press, 1999. 6. Kirk R. & Hunt A. Digital Sound Processing for Music and Multimedia, Focal

Press, 1999. 7. Eargle J. H. Music Sound and Technology, Van Nostrand Reinhold, 1995. 8. Vijay Madisetti, Video, Speech, and Audio Signal Processing and Associated

Standards, CRC Press, 2009.

25

MECAE 106 - 4 EMBEDDED SYSTEM DESIGN L T P C 3 0 0 3

Module 1: System Design Methodologies System Design Challenges, Processor-Level Models, System-Level Models, System Design Tools. System Design Methodologies: Bottom-up Methodology, Top-down Methodology, Meet-in-the-middle Methodology, Platform Methodology, FPGA Methodology, System-level Synthesis, Processor Synthesis.

Module 2: Modelling and Synthesis Models of Computation, System Design Languages, System Modeling, Processor Modeling, System Synthesis, System Design Trends, Automatic TLM Generation, Platform Synthesis.

Module 3: Software Synthesis Target Languages for Embedded Systems, RTOS, Software Synthesis Overview, Code Generation, Multi-Task Synthesis, Internal Communication, Startup Code, Binary Image Generation, Execution.

Module 4: Hardware Synthesis RTL Architecture, Input Models, Estimation and Optimization, Register Sharing, Functional Unit Sharing, Connection Sharing, Register Merging, Chaining and Multi-Cycling, Functional-Unit Pipelining, Datapath Pipelining, Control and Datapath Pipelining Scheduling, Interface Synthesis.

Embedded Design Practice: System Level Design Tools, Embedded Software Design Tools, Hardware Design Tools, Case Study.

References: 1. Gajski D. D., Abdi S., Gerstlauer A. & Schirner G. Embedded System Design:

Modeling, Synthesis, Verification, Springer, 2009. 2. Peckol & James Embedded Systems: A Contemporary Design Tool, John Wiley &

Sons, 2008. 3. Marwedel P., Embedded System Design, Springer, 2006. 4. Gerstlauer A., Doemer R., Peng J. & Gajski D., System Design: A Practical Guide

with SpecC, Kluwer, 2001.

26

5. Groetker T., Liao S., Martin G. & Swan S., System Design with SystemC, Kluwer, 2002.

6. Vahid F. & Givargis T., Embedded System Design: A Unified Hardware / Software Introduction, John Wiley & Sons, 2001.

27

MECAE 107 ELECTRONIC SYSTEM DESIGN LAB - I L T P C 0 0 3 2

System simulation experiments based on the courses MECAE 101, MECAE 102, MECAE 103 and MECAE 104 and the elective courses opted by the student in the first semester.

MECAE 108 SEMINAR I L T P C 0 0 2 1

Each student shall present a seminar on any topic of interest related to the core / elective courses offered in the first semester of the M. Tech. Programme. He / she shall select the topic based on the references from international journals of repute, preferably IEEE journals. They should get the paper approved by the Programme Co-ordinator / Faculty member in charge of the seminar and shall present it in the class. Every student shall participate in the seminar. The students should undertake a detailed study on the topic and submit a report at the end of the semester. Marks will be awarded based on the topic, presentation, participation in the seminar and the report submitted.

28

MECAE 201 ELECTRONIC PRODUCT DESIGN L T P C 3 1 0 4

Module 1: Design for Manufacturability Introduction, Growth, Mature and Saturation, Product Life Cycle Management, Design for Manufacturability, Need of DFM: Higher Quality, Lower Cost, Faster Time to Market, Better Yield Etc. Designer Vs. Manufacturer Need for Different DFM Techniques for Different Companies, Different Applications, Different Manufactures, Different Equipment and Processes. Development of DFM Rules: Design Guidelines, Exceptions. Simple Assembly Process Vs. Complex and Expensive Components, Simple Component Manufacture Vs. Complex Manufacturing Process, Simple and Inexpensive Design Vs. Expensive and Complex Service and Support.

Module 2: PCB Design and Manufacturing Process Design Considerations for Different Types of PCBs: Single Layer PCB, Multilayer PCB, Flexible PCB, etc. Design Considerations for PCBs for Different Applications: Digital Circuits, Analog Circuits, High Speed Circuits, Power Circuits, etc. Layout Rules and Parameters. Design Rule Checks: Signal Layer Checks, Power / Ground Checks, Solder Mask Check, Drill Check, etc. Automated Processes, Through Hole Vs. SMT Technologies. Thermal Management for IC and PCBs, Cooling Requirements, Electronic Cooling Methods.

Module 3: Electromagnetic Compatibility Conducted Emission, Conducted Susceptibility, Radiated Emission, Radiated Susceptibility, Common EMC Units, Practical Experiences and Concerns, Non-Ideal Behavior of Electronic Components, FCC Regulations, CISPR / IEC Regulations, Measurement of Radiated and Conducted Interference, Capacitive and Inductive Coupling, Effect of Shield on Capacitive, Inductive and Magnetic Coupling, Shield Transfer Impedance, Shielding Properties of Various Cable Configurations.

Grounding: Safety Grounds, Signal Grounds, Single-Point and Multipoint-Point Ground Systems, Hybrid Grounds, Functional Ground Layout, Practical Low Frequency Grounding, Hardware Grounds, Grounding of Cable Shields, Ground Loops, Common Mode Choke, Shield Grounding at High Frequencies, Guarded Instruments.

29

EMC Components : EMI Suppression Cables, EMC Connectors, EMC Gaskets, Isolation Transformers, Opto-Isolators.

Module 4: Electrostatic Discharge and Electronic Packaging Electrostatic Discharge (ESD): Static Generation, Human Body Model, Static Discharge, ESD Protection in Equipment Design, Transient and Surge Protection Devices, Software and ESD Protection, ESD Vs. EMC, ESD Testing.

Functions of an Electronic Package: Packaging Hierarchy, Driving Forces on Packaging

Technology, Materials for Microelectronic Packaging, Material for High-Density

Interconnect Substrates, Electrical Anatomy of Systems Packaging, Signal Distribution, Power Distribution, Electromagnetic Interference, Design Process.

References: 1. Michael Orshansky, Sani Nassif & Duane Boning, Design for Manufacturability and

Statistical Design: Constructive Approach, Springer, 2008. 2. Chiang, Charles, Kawa & Jamil Design for Manufacturability and Yield for

Nano-Scale CMOS, Springer, 2007. 3. Owen Molloy, Steven Tilley & Ernest Warman, Design for Manufacturing and

Assembly: Concepts, Architectures and Implementation, Springer, 1998. 4. Clyde F. Coombs, Printed Circuits Handbook, McGraw Hill, 2007. 5. Richard K. Ulrich &William D. Brown, Advanced Electronic Packaging, 2nd Ed.,

Wiley, 2006. 6. Henry W. Ott, Noise Reduction Techniques in Electronic Systems, 2nd Ed., Wiley,

1998. 7. Henry W Ott, Electromagnetic Compatibility Engineering, Wiley, 2009. 8. Prasad Kodali V., Engineering Electromagnetic Compatibility: Principles,

Measurements, Technologies and Computer Models, 2nd Ed., Wiley, 2001.

30

MECAE 202 ANALOG AND DATA CONVERSION SYSTEM DESIGN

L T P C 3 1 0 4

Module 1: Linear Op-Amp Circuits Review of Inverting and Non-Inverting Configurations, Current to Voltage and Voltage to Current Converters, Current Amplifiers, Difference Amplifiers, Instrumentation Amplifier, Input Offset Error, Compensation in Op-Amp Circuits, Op-Amp Noise, Noise Filtering.

Low Input Offset Voltage Op-Amps, Low Input Offset Current Op-Amps, Low Noise Op-Amps, Amplifier Input Errors, Amplifier Output Errors,

Module 2: Dynamic Analog Circuits Characteristics of MOSFET Switch, Sample and Hold Circuits: Sample and Hold / Track and Hold Amplifiers, SHA / THA Performance Parameters, Types of SHA / THA.

Comparators: Characterization, Two-Stage Open-Loop Comparators, Discrete-Time

Comparators, High-Speed Comparators, Analog Multiplexers.

Switched Capacitor Circuits: Switched Capacitor Amplifiers, Switched Capacitor Integrators, Models of Two-Phase Switched Capacitor Circuits, First and Second Order Switched Capacitor Circuits, Switched Capacitor Filters.

Module 3: Data Converter Fundamentals and Architecture Analog Vs. Discrete Time Signals, Specifications of Digital-to-Analog Converter (DAC), Specifications of Analog-to-Digital Converter (ADC), Mixed-Signal Layout Issues. DAC Architectures: Resistor-String DAC, Current-Steering DAC, Charge-Scaling DAC, Cyclic DAC, Pipeline DAC. ADC Architectures: Flash ADC, Pipeline ADC, Integrating

ADC, Successive Approximation ADC, Oversampling ADC.

Module 4: Implementation of Data Converters Implementation of DACs: R-2R Topologies for DACs, Current-Mode and Voltage-Mode R-2R DAC, Wide-Swing Current-Mode R-2R DAC, Topologies without an OP-Amp. Characteristics of Op-Amps used in Data Converters. Implementation of ADCs: Implementing the Sample and Hold, Implementing Cyclic and Pipelined ADCs

Design of Multi Channel, Low Level and High Level, Data Acquisition Systems using ADC / DAC, SHA and Analog Multiplexers.

31

References: 1. Franco S., Design with Operational Amplifiers and Analog Integrated Circuits,

3rd Ed., McGraw Hill, 2002. 2. Philip E. Allen & Douglas R. Holberg, CMOS Analog Circuit Design, 2nd Ed.,

Oxford University Press, 2009. 3. Jacob Baker R., CMOS: Circuit Design, Layout, and Simulation, Wiley, 2010. 4. David A. Johns & Ken Martin, Analog Integrated Circuit Design, Wiley India Pvt.

Ltd., 2008. 5. Walt Kester, Mixed-Signal and DSP Design Techniques, Newnes, Elsevier Science,

2003.

6. Walt Kester, Analog-Digital Conversion, Analog Devices Inc., 2004.

32

MECAE 203 HIGH SPEED DIGITAL SYSTEM DESIGN

L T P C 3 1 0 4

Module 1: Introduction to High Speed Digital Design Frequency, Time and Distance; Capacitance and Inductance Effects; High Speed Properties of Logic Gates; Speed and Power; Modelling of Wires: Geometry and Electrical Properties of Wires, Electrical Models of Wires; Transmission Lines: Lossless LC Transmission Lines, Lossy LRC Transmission Lines, Special Transmission Lines.

Module 2: Power Distribution and Noise Power Supply Network, Local Power Regulation, IR Drops, Area Bonding, Onchip Bypass Capacitors, Symbiotic Bypass Capacitors, Power Supply Isolation, Noise Sources in Digital System: Power Supply Noise, Cross Talk, Intersymbol Interference.

Module 3: Signalling Convention and Circuits Signalling Modes for Transmission Lines, Signalling over Lumped Transmission Media, Signalling over RC Interconnect, Driving Lossy LC Lines, Simultaneous Bi-Directional

Signalling, Terminations, Transmitter and Receiver Circuits.

Module 4: Timing Convention and Synchronisation Timing Fundamentals: Timing Properties of Clocked Storage Elements, Signals and Events, Open Loop Timing Level Sensitive Clocking, Pipeline Timing, Closed Loop Timing, Clock Distribution, Synchronization Failure and Metastability, PLL and DLL Based Clock Aligners.

References: 1. William S. Dally & John W. Poulton, Digital Systems Engineering, Cambridge

University Press, 2008.

2. Howard Johnson & Martin Graham, High Speed Digital Design: A Handbook of Black Magic, Prentice Hall, 1993.

3. Masakazu Shoji, High Speed Digital Circuits, Addison Wesley Publishing Company, 1996.

4. Jan M. Rabaey, Anantha Chandrakasan & Borivoje Nikolic, Digital Integrated Circuits: A Design Perspective, 2nd Ed. Pearson Education Asia, 2007.

33

MECAE 204 DSP ALGORITHM AND ARCHITECTURE DESIGN

L T P C 3 1 0 4

Module 1: DSP Algorithm Design DSP Representations (Data-Flow, Control-Flow, and Signal-Flow Graphs, Block Diagrams), Fixed-Point DSP Design (A / D Precision, Coefficient Quantization, Round-off and Scaling), Filter Structures (Recursive, Non-Recursive and Lattice), Algorithmic Simulations of DSP Systems in C, Behavioral Modelling in HDL. System Modeling and Performance Measures.

Module 2: Circuits and DSP Architecture Design Fast Filtering Algorithms (Winograd's, FFT, Short-Length FIR), Retiming and Pipelining, Block Processing, Folding, Distributed Arithmetic Architectures, VLSI Performance Measures (Area, Power, and Speed), Structural Modeling in VHDL. Analog Signal Processing for Fast Operation. Impact of Non Ideal Characteristics of Analog Functional Blocks on the System Performance.

Module 3: DSP Module Synthesis Distributed Arithmetic (DA), Advantages of Using DA, Size Reduction of Look-Up Tables, Canonic Signed Digit Arithmetic, Implementation of Elementary Functions Table-Oriented Methods, Polynomial Approximation Random Number Generators, Linear Feedback Shift Register, High Performance Arithmetic Unit Architectures (Adders, Multipliers, Dividers), Bit-Parallel, Bit-Serial, Digit-Serial, Carry-Save Architectures, Redundant Number System, Modeling for Synthesis In HDL, Synthesis Place-And-Route.

Module 4: Parallel Algorithms and their Dependence Applications to Some Common DSP Algorithms, System Timing using the Scheduling Vector, Projection of the Dependence Graph using a Projection Direction, The Delay Operator and Z-Transform Techniques for Mapping DSP Algorithms onto Processor Arrays, Algebraic Technique for Mapping Algorithms, Computation Domain, Dependence Matrix of a Variable, Scheduling and Projection Functions, Data Broadcast and Pipelining, Applications using Common DSP Algorithms.

34

References: 1. Sen M. Kuo, Woon-Seng S. Gan, Digital Signal Processors: Architectures,

Implementations, and Applications, Prentice Hall, 2004. 2. Keshab K. Parhi, VLSI Signal Processing Systems, Design and Implementation,

John Wiley & Sons, 1999. 3. Uwe Meyer-Baese, Digital Signal Processing with Field Programmable Gate Array,

Springer- Verlag, 2001. 4. John G. Proakis & Dimitris Manolakis K. DSP Principles, Algorithms and

Applications, Prentice Hall, 1995. 5. Pirsch, Architectures for Digital Signal Processing, John Wiley & Sons, 1998. 6. Lars Wanhammar, DSP Integrated Circuits, Academic Press, 1999. 7. Parhami & Behrooz Computer Arithmetic: Algorithms and Hardware Designs,

Oxford University Press, 2000. 8. Israel Koren & A. K. Peters, Computer Arithmetic Algorithms, Natick, 2002.

35

MECAE 205 - 1 WIRELESS COMMUNICATION SYSTEM DESIGN

L T P C 3 0 0 3

Module 1: Fading and Diversity Wireless Channel Models: Path Loss and Shadowing Models, Statistical Fading Models, Narrow Band and Wideband Fading Models, Review of Performance of Digital Modulation Schemes over Wireless Channels.

Diversity: Time Diversity, Frequency and Space Diversity, Receive Diversity, Concept of Diversity Branches and Signal Paths, Performance Gains; Combining Methods: Selective Combining, Maximal Ratio Combining, Equal Gain Combining, Performance Analysis for Rayleigh Fading Channels.

Module 2: Cellular Communication Cellular Networks; Multiple Access: FDMA, TDMA, Spatial Reuse, Co-Channel

Interference Analysis, Hand-off, Erlang Capacity Analysis, Spectral Efficiency and Grade of Service, Improving Capacity: Cell Splitting and Sectorization.

Module 3: Spread Spectrum and CDMA Direct Sequence Spread Spectrum (DS-SS), Frequency Hopping Spread Spectrum (FH-SS), ISI and Narrow Band Interference Rejection, Code Design- Maximal Length Sequences, Gold Codes, Design of SS Transmitters.

Diversity in DS-SS Systems, Rake Receiver, Performance Analysis, CDMA Systems:

Interference Analysis for Broadcast and Multiple Access Channels, Capacity of Cellular CDMA Networks, Reverse Link Power Control, Hard and Soft Hand-off Strategies, Design of SS Receivers.

Module 4: Capacity and Standards Capacity of Wireless Channels: Capacity of Flat and Frequency Selective Fading Channels.

Cellular Wireless Communication Standards: Overview of Second Generation Cellular Wireless Systems: GSM and IS-95 Standards, 3G Systems: UMTS & CDMA 2000 Standards and Specifications, Vision of 4G Standards.

36

References: 1. Andrea Goldsmith, Wireless Communications, Cambridge University press, 2006. 2. Rappaport T. S., Wireless Communication, principles & practice, Prentice Hall of

India, 2002. 3. Simon Haykin & Michael Moher, Modern Wireless Communications, Person

Education, 2007. 4. Stuber G. L, Principles of Mobile Communications, 2nd Ed., Kluwer Academic

Publishers, 2001. 5. Peterson R. L, Ziemer R. E. & David E. Borth, Introduction to Spread Spectrum

Communication, Pearson Education, 1995. 6. Viterbi A. J., CDMA: Principles of Spread Spectrum, Addison Wesley, 1995.

37

MECAE 205 -2 RF INTEGRATED CIRCUIT DESIGN L T P C 3 0 0 3

Module 1: Elements of Microwave Integrated Circuits (MIC) Planar Transmission Line, Lumped Element for MIC, Substrate for MIC, Hybrid Technology: Thin Film, Thick Film and Mid Film Technologies. Monolithic Technology. Planar Transmission Lines, Method of Analysis TEM Analysis, Method of Conformal Transformation, Variational Approach, Transverse Transmission Line Technique. Finite

Difference Method.

Module 2: Microwave Integrated Subassemblies Salient Features of MICs, Characteristics and Properties of Substrate, Conductor, Dielectric and Resistive Materials, MMIC Fabrication Techniques, Diffusion and Ion Implantation, Oxidation and Film Deposition, Epitaxial Growth, Lithography, Etching and Photo Resist, Deposition Methods, Steps Involved in the Fabrication of MOSFET.

Module 3: RF IC Design Flow System Design and Behavioral Modelling, Schematic Entry and Design Environment, Time and Frequency Domain Circuit Simulation, Layout, Electromagnetic Extraction, Parasitic Extraction, DRC and LVS, Verification in System Bench.

RFIC Layout, RFIC Packaging and System Integration, System Design Considerations: Packaging, Power, Heat Dissipation, Parameter Tradeoffs.

Module4: Coupled Microstrip, Directional Couplers Introduction to Coupled Microstrip, Even and Odd Mode Analysis, Directional Couplers, Branch Line Coupler.

References: 1. Frank Ellinger, Radio Frequency Integrated Circuits and Technologies, Springer,

2007. 2. Gupta K. C. & Amarjit Singh, Microwave Integrated Circuits" John Wiley & Sons,

1975. 3. Hoffman R. K., Handbook of Microwave Integrated Circuits, Artech House

Publishers, 1987. 4. Leo G. Maloratsky, Passive RF & Microwave Integrated Circuits, Elsevier, 2004.

38

5. Joseph J. Carr, RF Components and Circuits, Newnes, 2002. 6. Inder Bahl, Lumped Elements for RF and Microwave Circuits, Artech House, 2003.

39

MECAE 205 - 3 DSP SYSTEM DESIGN L T P C 3 0 0 3

Module 1: Introduction Need for Special Digital Signal Processors, Processor Trends: Von Newmann Vs. Harvard Architecture, Architectures of Superscalar and VLIW Fixed and Floating Point Processors, New Digital Signal Processing Hardware Trends, Selection of DS Processors.

Module 2: Typical DS Processor Introduction to a Popular DSP from Texas Instruments (TMS330C6000 Series), CPU Architecture, CPU Data Paths and Control, Internal Data / Program Memory. On Chip Peripherals: Timers, Multi Channel Buffered Serial Ports, Extended Direct Memory Access, Interrupts, Pipelining.

Module 3: Filter Design Techniques Design Aspects: Introduction to the C6713 DSK, Code Composer Studio IDE, Matlab and Basic Skills, Review of FIR Filtering: FIR Filter Design Techniques and Tools, Review of IIR Filtering: IIR Filter Design Techniques and Tools, Sampling, Quantization and Working with the AIC23 Codec, Writing Efficient Code: Optimizing Compiler, Effect of Data Types and Memory Map: TMS320C6713 Assembly Language Programming: Instructions Set And Addressing Modes, Linear Assembly.

Module 4: Current Trends Current Trend in Digital Signal Processors: DSP Controllers, Architecture of TMS320C28XX Series DSP and its Applications. Architecture Trends of Other Texas Instruments DSP Processors, Analog Devices DS Processors: Introduction to Sharc / Tiger Sharc / Blackfin Series, Other Major Vendors in the DSP Market and the Latest Trends.

References: 1. Online TI Materials for the TI C6713 DSK Board: http://www.ti.com 2. User's Manuals of Various Fixed and Floating Point DS Processors. 3. Naim Dahnoun, Digital Signal Processing Implementation Using the TMS320C6000

Processors, Prentice Hall, 2000. 4. Chassaing R., Digital Signal Processing and Applications With the C6713 and C6416

DSK, John Wiley & Sons, 2004.

40

5. Sen M. Kuo & Woon-Seng Gan, Digital Signal Processors: Architectures, Implementations, and Applications, Pearson, 2005.

6. David J. De Fatta, Joseph G. Lucas & William S. Hodgkiss, Digital Signal Processing: A System Design Approach, Wiley India, 2009.

7. Oppenheim A. V. & Schafer R. W., Discrete-Time Signal Processing, 2nd Ed., Prentice Hall, 1989.

8. John G. Proakis & Dimitris G. Manolakis, Digital Signal Processing: Principles, Algorithms and Applications, 4th Ed., Pearson, 2007.

41

MECAE 205 - 4 ASIC DESIGN L T P C 3 0 0 3

Module 1: Types of Asics Design Flow, Economics of Asics, ASIC Cell Libraries, CMOS Logic Cell Data Path Logic Cells, I / O Cells, Cell Compilers.

Module 2: ASIC Library Design Transistors as Resistors, Parasitic Capacitance, Logical Effort Programmable ASIC Design Software: Design System, Logic Synthesis, Half Gate ASIC, ASIC Construction, Floor Planning & Placement, Routing.

Module 3: System on Chip Design Process A Canonical SoC Design, SoC Design Flow, Waterfall Vs. Spiral, Top-Down Vs. Bottom-Up, Specification Requirements, Types of Specifications, System Design Process,

System Level Design Issues, Soft IP Vs. Hard IP, Design for Timing Closure, Logic Design Issues, Physical Design Issues, Verification Strategy, On-Chip Buses and Interfaces, Low Power, Manufacturing Test Strategies, MPSoCs, Techniques for Designing MPSoCs.

Module 4: Soc Verification Verification Technology Options, Verification Methodology, Verification Languages, Verification Approaches, and Verification Plans. System Level Verification, Block Level Verification, Hardware / Software Co-Verification, and Static Net List Verification.

References: 1. Michael John Sebastian Smith, Application Specific Integrated Circuits, Pearson

Education India, 2008. 2. Farzad Nekoogar , Faranak Nekoogar & Jeffrey Ebert, From ASICs to SOCs: A

Practical Approach, Prentice Hall, 2003.

42

MECAE 206 - 1 OPTICAL COMMUNICATION SYSTEM DESIGN L T P C 3 0 0 3

Module 1: Review of Fiber Optic Communication Systems Evolution, Benefits and Disadvantages of Fiber Optics, Transmission Windows, Transmission through Optical Fiber, The Numerical Aperture (NA), The Optical Fiber, Types of Fiber, Different Losses and Issues in Fiber Optics, Attenuation, Dispersion, Connectors and Splices, Bending Loses, Absorption, Scattering, Very Low Loss Materials, Plastic and Polymer-Clad-Silica Fibers, Wave Propagation in Step Index and Graded Index Fiber, Fiber Dispersion, Single Mode Fibers, Multimode Fibers, Dispersion Shifted Fiber, Dispersion Flattened Fiber, Polarization, Cut-Off Condition and V-Parameter. Light Sources and Transmitters, Detectors and Receivers.

Module 2: Fiber Optic System Design Considerations and Components Indoor Cables, Outdoor Cables, Cabling Example, Power Budget, Bandwidth and Rise Time Budgets, Electrical and Optical Bandwidth, Connectors, Fiber Optic Couplers.

Optical Fiber Communication System: Telecommunication, Local Distribution Series, Computer Networks, Local Data Transmission, Digital Optical Fiber Communication System, First and Second-Generation System, Future Systems. Noise Sources, Channel Impairments, and Optical Transmission System Design.

Module 3: Advanced Multiplexing Strategies Optical TDM, Subscriber Multiplexing (SCM), WDM and Hybrid Multiplexing Methods; Network Element Technology: (D)WDM Technology; Gratings, Filters, Passive and Active Devices, Signal Processors, Gain Equalizer, Power Splitter, Combiner, Coupler, Optical Switching and Routing; Space, Time, and Wavelength Granularity, Add / Drop Mux, Advanced Optical Signal Processing, Functions of Photonic Integrated Circuits, Advanced Modulation Formats, OFDM, Polarization Multiplexing, Constrained Coding, and Coherent Detection.

Module 4: Optical Networking Data Communication Networks, Network Topologies, MAC Protocols, Network Architecture: SONET / TDH, Optical Transport Network, Optical Access Network,

Optical Premise Network. Broadcast and Select WDM Concepts, Wavelength Routed

43

Protocols, Performance of WDM + EDFA Systems, Solitons, Optical CDMA, Introduction to IP Over WDM, Optical Packet Switching, Optical Burst Switching, Optical Switch Fabrics OSFs and their Application.

References: 1. John Senior, Optical Fiber Communications: Principles and Practice, 3rd Ed.,

Prentice Hall, 2008.

2. Optical Society of America, Fiber Optics Handbook: Fiber, Devices, and Systems for Optical Communications, McGraw Hill, 2001.

3. Iizuka K., Elements of Photonics, Volume II, Wiley, 2002. 4. Shieh W., & Djordjevic I., OFDM for Optical Communications, Elsevier, 2009. 5. Javier Aracil, Enabling Optical Internet with Advanced Network Technologies,

Springer, 2009. 6. Masataka Nakazawa, High Spectral Density Optical Communication Technologies,

Springer, 2010.

44

MECAE 206 - 2 RF AND MICROWAVE NETWORK DESIGN L T P C 3 0 0 3

Module1: Microwave Network Analysis Equivalent Voltages and Currents, Concept of Impedance, Impedance and Admittance Matrices of Microwave Junctions, Scattering Matrix Representation of Microwave Networks, Microwave One-Port Network, Symmetry of Input Impedance and Reflection Coefficient, N-Port Microwave Network, Generalized Scattering Parameters, Definition of Scattering Matrix, Properties of the Scattering Matrix, S-Parameters at Arbitrary Planes, Transmission (ABCD) Matrix, Equivalent Circuits for Two-Port Networks, Signal Flow Graphs, Scattering Matrix of a Two Port Network, Salient Features of S-Matrix, Salient

Features of Multiport Network, Losses in Microwave Circuits, Return Loss, Insertion Loss, Transmission Loss, Reflection Loss, Impedance Matrix, Short Circuit Admittance Parameters of a -Network, S-Matrix of Series Element in the Transmission Line, S-Matrix for E-Plane Tee Junction, S-Matrix for H-Plane Tee Junctions,

Module 2: Analysis of Symmetrical Networks Introduction, Magnitude Theorem For 2-Port Passive Lossless Circuits, Determinate Theorem For 2-Port Passive Lossless Circuits, Simultaneous Conjugate Match Theorem for A 2-Port Passive Lossless Circuit, Input and Output Matching Network Theorem, Lumped-Element Matching Networks, Distributed-Element Matching Networks, Bandwidth Considerations for Matching Networks,

Module 3: Power Dividers and Couplers Scattering Matrix of 3-Port and 4-Port Junctions, T-Junction Power Divider, Wilkinson Power Divider, Input Considerations, Mode Decomposition, Even Mode, Odd Mode and Layout.

Qualitative Description of Two-Hole and Multi-Hole Waveguide Couplers, Hybrid Junctions.

Directional Couplers: Performance Measures, Coupler Scattering Matrix, Types of 4-Port

Couplers, Coupler Applications, Even and Odd Mode Analysis. Branchline Coupler: Even and Odd Mode Decomposition, Even and Odd Mode Analysis. Parallel Line Coupler: S-Parameter Determination, Mode Decomposition: Even Mode, Odd Mode, Performance

45

Comparison. Directivity Enhancement Techniques for Microstrip Parallel Line Couplers: Analysis, Design Procedure, Lang Couplers.

Module 4: Ferrimagnetic Components Microwave Ferrites, Permeability Tensor, Wave Propagation in Ferrite Medium, Faraday Rotation, Birefringence, Ferrite Loaded Waveguides, Ferrite Circulators, Isolators and Phase Shifters.

References: 1. David M. Pozzar, Microwave Engineering, Wiley India, 2007. 2. Leo G Maloratsky, Passive RF & Microwave Integrated Circuits, Elsevier, 2004. 3. Hee-Ran Ahn, Asymmetric Passive Components in Microwave Integrated Circuits,

John Wiley & Sons, 2006. 4. Sorrentino R. & Bianchi G., Microwave and RF Engineering, John Wiley, 2010. 5. Joseph J. Carr, RF Components and Circuits , Newnes, 2002. 6. Guillermo Gonzalez, Microwave Transistor Amplifiers: Analysis and Design,

2nd Ed., Prentice Hall, 1997. 7. Robert E. Collin, Foundations for Microwave Engineering, 2nd Ed., McGraw Hill,

1992.

46

MECAE 206 - 3 DETECTION AND TRACKING SYSTEM DESIGN L T P C 3 0 0 3

Module 1: Reception in White Noise Introduction, The Active Radar or Sonar Signal, Physical Interpretation, Passive Listening, Optimum Reception in White Noise: Principle, Estimation of a Parameter, Simultaneous Estimation of Several Parameters, Optimum Detection, Optimum Receiver, Optimum

Detector, The Ambiguity Function, Detection Performance.

Module 2: Reception in Colored Noise Optimum Reception in Colored Noise, Receiver Structure, Application to Spurious Echoes or Jammers, Stationary Colored Noise and Infinite Observation Time, Adaptive Processing, Adaptive Filtering using a Transversal Filter, Adaptive Whitening, Sensor Arrays, Space-time Processing, Passive Listening, MUSIC.

Module 3: Tracking Modeling Detection and Tactical Decision Aids, Cumulative Probability of Detection, Tracking Target Motion Analysis and Localization, Design and Evaluation of Sonars and Radars.

Module 4: Digital Sonar System Design of Digital Sonar: Implementation Method of Various Function of Digital Sonar, System Simulation Technique in Digital Sonar Design, Examples of Typical Modern Digital Sonar.

References: 1. Franois Le Chevalier, Principles of Radar and Sonar Signal Processing, Artech,

2002.

2. Richard P. Hodges, Underwater Acoustics: Analysis, Design and Performance of Sonar, Wiley, 2010.

3. Li Qihu, Digital Sonar Design in Underwater Acoustics, Springer, 2011.

4. Samuel S. Blackman & Robert Popoli, Design and Analysis of Modern Tracking Systems, Artech, 1999.

47

MAE 206 - 4 EMBEDDED NETWORK DESIGN L T P C 3 0 0 3

Module 1: Programming for Embedded Systems Pointers and Memory Mapping in Operating System. C Internals. RTOS: OS Basics, OS: Ucos2, Linux, Linux Internals, OS Compilation and Optimization. Real Time OS Kernel Architecture, Scheduling Algorithms: Priority Based, Shortest Job First, Round-Robin, FIFO, etc. Task Synchronization: Mutual Exclusion, Semaphores. Embedded Operating Systems, Mobile Operating Systems, Porting RTOS or EOS on a Hardware Platform.

Module 2: Embedded Communication Systems Standards for Embedded Communication, USART, SPI, 12C, CAN, USB, Firewire, Ethernet, Wireless Communications like IrDA, Bluetooth, 802.11, etc., Security Issues in

Embedded Communication.

Writing Codes for Serial Communication in C or CPP, MP3 Decoding Using C, Java Enabled Information Appliances, Mobile Java Application (Jini), Embedded Database Applications, Voice-Over IP.

Module 3: Device Drivers Recapitulation of Kernel Mechanisms; Character Drivers, Block Drivers, Network Drivers, Device Driver and Networking Stack Development. Device Driver Development on Linux.

Protocol Implementation On Microcontroller And Processors: Device Awareness: PIC, 8051, AVR, ARM-7, Configuring Network Devices, WLAN Authentication and Data Transfer Protocols: TCP / IP 80211.A, 80211.B, 80211.G, Encryption Protocols.

Module 4: Automotive Networked Embedded Systems Trends, Time Triggered Communication, CAN for Embedded Systems, LIN Standard, System Software for Automotive Applications.

Networked Embedded Systems in Industrial Automation: Fieldbus Systems, Real-Time Ethernet, WLAN and WPAN for Industrial Environments.

48

References: 1. Gregory J. Pottie & William J. Kaiser, Principles of Embedded Networked Systems

Design, Cambridge University Press, 2009. 2. Richard Zurawski, Embedded Systems Handbook, Second Edition: Networked

Embedded Systems, CRC Press, 2009. 3. Dreamtech Software Team, Programming for Embedded Systems: Cracking the

Code, 2009. 4. John Catsoulis, Designing Embedded Hardware, 2nd Ed., Oreilly Media, 2005. 5. Daniel Wesley Lewis, Fundamentals of Embedded Software: Where C and Assembly

Meet, PHI Learning, 2009.

49

MECAE 207 ELECTRONIC SYSTEM DESIGN LAB -II L T P C 0 0 3 2

System simulation experiments based on the courses MECAE 201, MECAE 202, MECAE 203, MECAE 204 and the elective courses opted by the student in the second semester.

MECAE 208 SEMINAR II L T P C 0 0 2 1

Each student shall present a seminar on any topic of interest related to the core / elective courses offered in the second semester of the M. Tech. Programme. He / she shall select the topic based on the references from international journals of repute, preferably IEEE journals. They should get the paper approved by the Programme Co-ordinator / Faculty member in charge of the seminar and shall present it in the class. Every student shall participate in the seminar. The students should undertake a detailed study on the topic and submit a report at the end of the semester. Marks will be awarded based on the topic, presentation, participation in the seminar and the report submitted.

50

MECAE 301 INDUSTRIAL TRAINING AND /OR MINIPROJECT

L T P C 0 0 20 10

The student shall undergo

i) An Industrial Training of 12 weeks duration in an industry / company / institution approved by the institute under the guidance of a staff member in the concerned field. At the end of the training he / she have to submit a report on the work being carried out.

OR ii) An Industrial Training of 1 month duration and Mini Project of 2 months duration in

an industry / company / institution approved by the institute under the guidance of a staff member in the concerned field. At the end of the training he / she have to submit a report on the work being carried out.

MECAE 302 MASTERS THESIS PHASE - I L T P C 0 0 10 5

The thesis (Phase - I) shall consist of research work done by the candidate or a comprehensive and critical review of any recent development in the subject or a detailed report of project work consisting of experimentation / numerical work, design and or development work that the candidate has executed.

In Phase - I of the thesis, it is expected that the student should decide a topic of thesis, which is useful in the field or practical life. It is expected that students should refer national & international journals and proceedings of national & international seminars. Emphasis should be given to the introduction to the topic, literature survey, and scope of the proposed work along with some preliminary work / experimentation carried out on the thesis topic. Student should submit two copies of the Phase - I thesis report covering the content discussed above and highlighting the features of work to be carried out in Phase II of the thesis. Student should follow standard practice of thesis writing. The candidate will deliver a talk on the topic and the assessment will be made on the basis of the work and talks there on by a panel of internal examiners one of which will be the internal guide. These examiners should give suggestions in writing to the student to be incorporated in the Phase II of the thesis.

51

MECAE 401 MASTERS THESIS L T P C 0 0 30 15

In the fourth semester, the student has to continue the thesis work and after successfully finishing the work, he / she have to submit a detailed thesis report. The work carried out should lead to a publication in a National / International Conference. They should have submitted the paper before M. Tech. evaluation and specific weightage should be given to accepted papers in reputed conferences.

MECAE 402 MASTERS COMPREHENSIVE VIVA

A comprehensive viva-voce examination will be conducted at the end of the fourth semester by an internal examiner and external examiners appointed by the university to assess the candidates overall knowledge in the respective field of specialization.