APPLICATION TOOLING SOLUTIONS

CONTENTS12 TO 13T CRIMPERS 523T CRIMPERS 660T CRIMPERS 6CUTTERS AND CUTTING HEADS 7ELECTRIC AND HYDRAULIC PUMPS 9DIES COPPER 9HYDRAULIC POLE SAWS 10HYD IMPACT WRENCHES 12HYDRAULIC HOSE 12AUGER BITS AND ADAPTERS 12IMPACT SOCKETS 16COUPLERS 16

3

“Platinum Series” Battery Powered 13 Tonne Hydraulic Crimper

The MSS “Platinum Series” Battery Powered Hydraulic Crimper has been designed to quickly and easily crimp electrical connectors up to and including 400mm² CU. It has an industry exclusive automatic two speed pump design, delivering rapid advance, combined with unmatched high force crimping speed, up to 300% faster than other brands – Worldwide.

The sturdy steel trigger guard helps to protect the trigger from unintentional operation and field knocks.

Each tool is supplied with a 220V charger, 2x re-chargeable batteries and a heavy duty plastic carry case. The crimping dies are supplied separately.

• Industry exclusive mechanical “Visual Pop-Up Indicator“, driven directly from the relief valve – assuring a correct crimp each & every time. *Patent Pending.

• Audible “Click“ Indicator – assuring correct crimp pressure.

• Industry exclusive MSS design head & piston, completely removing all retract pinch points, for ultimate safety *Patent Pending.

• Pressure biased release valve for easy piston retraction.

• Partial piston retract, speeding crimp cycle time and saving battery life.

Part No. MSS-C130-42-18V

*Crimp speed comparison based on competitor published data at time of printing.

Exclusive OHS compliant.No retract pinch points.

355° head rotation.

Variable speed trigger for full piston control.Mechanical release trigger saves battery life.

Output Force

14.6 Short Ton

13 tonnes

Tool Weight 15.8 lbs

7.2 kg - complete with 5.0Ah battery

Jaw Opening 1.65 “ 42mm

Length 16.45 “ 425mm

Width 2.87 “ 73mm

Height 11.4 “ 290mm

OperatingVoltage

18 V-DC

Recharge Time 1 hour

Battery 18V x 5.0Ah LI-I0N

Technical Data

ProudlyAustralian

Rapid Highforce Crimping 300% Faster*

355º Head Rotation

Visual Crimp Indicator - Audible Click & Visual Indicator

Quick recharge 18 V x 5.0 Ah Li-ion batteries.

One hand operation.Ergonomically designed hand grip for unmatched comfort and safety.

PATENT No13573/2011

Superior quality.Pump block fully machined from premium grade aircraft alloy.

4

The Kompressor is designed to crimp up to 750 MCM/400mm2 Copper and Aluminium connectors directly from an aerial bucket hydraulic tool circuit, or portable hydraulic power unit.

Features• Exclusive Visual Crimp Indicator, ensuring a correct

crimp force of 12 tonnes / 24,000 lbs.• Double action hydraulic system preventing hang ups.• Accepts all recognised industry standard “U” style 12 tonne dies.

i.e. MSS, Burndy, Alcoa, Anderson, Thomas & Betts and Huskie. Die sets sold separately.

• Industry exclusive MSS designed head and piston completely removing all retract pinch points for ultimate safety. *Patent Pending

• Exclusive spring return back up in case of loss of hydraulic system pressure.

Part No. MSS-LPHC-750-C Standard unit with couplers CRIMP CYCLE: 2 Seconds**Subject to available hydraulic flow.

ProudlyAustralian

HOSES COUPLERS

Kompressor™

355º Head rotation.

2 stage safety trigger, eliminating accidental engagement of the piston.

Ergonomic – Lessen operator fatigue. Compact, lightweight and well balanced hydraulic crimp tool.

Visual Crimp Indicator

Technical Data

Jaw opening 42mm 1.65"Flow range 12 - 34lpm 3 - 9gpm

Input pressure 105-175bar 1500 - 2500 psi

Crimping force 10.9 tonnes 12 tonsWeight 9kg 20lbsLength 386mm 15.2”Width 140mm 5.5”Height 194mm 7.6”

Accessories available:

DIE SETS

Superior quality, machined from lightweight premium grade aircraft alloy for superior strength and reliability.

Exclusive - No retract pinch points.

PATENTPENDING

NEW

5

Part No. MSS-U130-18V • Designed to quickly and easily crimp electrical connectors up to and including 300mm2• The ‘U’ style offers easier access to joints in tight areas• Sturdy steel trigger guard• Up to 300 percent faster than other brands worldwide

PLATINUM SERIES BATTERY CRIMPER U HEADBATTERY 13T12 TO 13T CRIMPERS

Unit: EA Qty: 1

Part No. MSS-C130-42-18V • Designed to quickly and easily crimp electrical connectors up to and including 400mm2 CU• Industry exclusive automatic two speed pump design• Sturdy steel trigger guard• Up to 300 per cent faster than other brands worldwide• Comes with case, 2 x 5Ah lithium batteries & 240V charger

PLATINUM SERIES BATTERY CRIMPER 13T Unit: EA Qty: 1

Part No. MSS-C130-42-M • 13 Tonne output and a wide 42mm jaw opening for up to and including 400mm2 Copper

conductor• Rapid 2 speed advance and pressure crimp stage pumping• Flat sided ‘no return Pinch Point’ Die retaining ram• Lightest tool of its kind

13T HYDRAULIC CRIMPER C HEADCRIMPERS 13T

Unit: EA Qty: 1

Part No. MSS-LPHC-750-C • Designed to crimp up to 750 MCM/400mm2 Copper and Aluminium connectors• Less than 2 second crimp cycle• Visual crimp indicator ensures correct crimp every time• Spring return feature in case of hydraulic pressure loss• Pinch point protection on die shoe return

KOMPRESSOR CRIMPER 12T(SH) 42MM JAW Unit: EA Qty: 1

Part No. MSS-U130-M • 13 Tonne Crimping for up to 300mm2 CU• Rapid 2 speed advance and pressure crimp stage pumping• U style head for tight spaces• Lightest most powerful tool of its kind on the market today

13T HYDRAULIC CRIMPER U HEADCRIMP HEADS 13T

Unit: EA Qty: 1

6

Part No. MSS-C130-42RH • 130kN force at die faces• Accepts all standard shell style 12/13 tonne die sets up to 400mm2 copper• Exclusive OHS compliant No retract pinch points• Remote pump operated-use with HPP1 hydraulic pump• Light-weight

CRIMPER - REMOTE - 13T X 42MM OPENING Unit: EA Qty: 1

Part No. MSS-U130-RH • 13 Tonne crimping for up to 300mm2 CU• U style head for those tight spaces• Accepts standard 12/13T die sets (with Die adaptor supplied)• For use with 700bar/10,000psi hydraulic power pumps

13 T HYDRAULIC CRIMPER - REMOTE U H Unit: EA Qty: 1

Part No. MSS-U230-18V • 60+ Crimps per battery charge• Visual crimp indicator - ensures correct crimp every time• Accepts MSS, Cembre and Klauke 23 Tonne block dies• 355 degree head rotation

PLATINUM SERIES BATTERY CRIMPER 23TCRIMP HEADS 223T CRIMPERS

Unit: EA Qty: 1

Part No. MSS-RH23 • 23 Tonne compression output for up to and including 630mm2 Copper conductors• Smallest and Lightest tool of its kind available• Use with a HPP1 hydraulic pump

23 TONNE CRIMP HEADCRIMP HEADS 23T

Unit: EA Qty: 1

Part No. MSS-RH60 • Designed as a portable crimping head for installing compression sleeves and terminals• Used for transmission construction and maintenance work• Single acting 60 tonne crimp head• Shell die sets sold separately• Use with HPP2 hydraulic pump

60 TON CRIMP HEAD60T CRIMPING60T CRIMPERS

Unit: EA Qty: 1

7

Part No. MSS-RH60-DA • 534kN force at die faces• Double acting hydraulic - eliminates dies jamming onto connectors• Lightweight materials used for superior weight saving• Remote pump operated 700bar/10,000psi• Fitted with quick connect male and female couplers

60 TON CRIMP HEAD DOUBLE ACTING Unit: EA Qty: 1

Part No. MSS-S25-18V • Guillotine style for cutting Copper, Aluminium, ACSR and Steel Wire Rope up to 25mm O.D.• Rapid blade advance - double speed in cutting stage• Rotating head 180 degree• Factory pre-set overload relief to protect tool• HD case, chargr and 2 x 18V batteries incl

BATTERY POWERED CABLECUTTER 25MMCAPACITYCUTTERSCUTTERS AND CUTTING HEADS

Unit: EA Qty: 1

Part No. MSS-S40-18V • Guillotine style for cutting Copper, Aluminium, ACSR and Steel Wire Rope up to 40mm O.D.• Rapid blade advance - double speed in cutting stage• Rotating head 180 degrees• Factory pre-set overload relief to protect tool• HD case, chargr and 2 x 18V batteries incl

BATTERY POWERED CABLE CUTTER 40MM MAX Unit: EA Qty: 1

Part No. MSS-KREC-54AC • Designed to cut the toughest Copper and Aluminium cables in a limited amount of space• Cutter comes in a HD case with 2 x batteries and a 240V charger• Built in circuit breaker for overloading protection• Comfortably fits into a gloved hand

GEAR DRIVEN CUTTER 14.4V INC 2 BATTERY Unit: EA Qty: 1

Part No. MSS-S25-RH • Remote tool head for cutting Copper, Aluminium, ACSR and steel wire rope up to 25mm O.D.• For use with 700bar/10,000psi hydraulic power pumps

HYD STEEL & WIRE ROPE CUTTER - MAX25MMCUTTERS

Unit: EA Qty: 1

8

Part No. MSS-S40-RH • Suitable for Copper, Aluminium and ACSR cable• Cuts up to 40mm O.D. cables• For use with 700bar/10,000psi hydraulic power pumps

HYD STEEL AND WIRE ROP CUTTER MAX 40MM Unit: EA Qty: 1

Part No. MSS-S60-RH • Suitable for Copper, Aluminium and ACSR cable• Cuts up to 60mm O.D. cables• Other sizes available

CUTTER - REMOTE HYDRAULIC - 60MM MAX Unit: EA Qty: 1

Part No. MSS-S100-RH • Suitable for Copper, Aluminium and ACSR cable• Cuts up to 100mm O.D. cables• Other sizes available

CUTTER REMOTE HEAD 100MM STEEL Unit: EA Qty: 1

Part No. MSS-S25M • HAND HYDRAULIC CUTTER MAX 25MM• CUTS COPPER, ALUMINIUM, ACSR, STEELCABLE (MAX 25MM)• ALSO CUTS STEEL ROPE AND RODS (MAX 20MM)• LIGHTWEIGHT-ONLY 4KGS

CUTTER- HAND HELD HYD.-7 TON -25MM MAX Unit: EA Qty: 1

Part No. MSS-S40M-S • HAND HELD HYDRAULIC CUTTER-MAX 40MM• CUTS COPPER AND ALUMINIUM CABLE UP TO 40MM OD• CUTS ACSR UP TO 28MM AND SOFT STEEL WIRE ROPE MAX 25MM• LIGHTWEIGHT-ONLY 6 KGS

CUTTER - HAND HELD HYDRAULIC - 40MM MAX Unit: EA Qty: 1

9

Part No. MSS-HCP-45SV • Suitable for use with all hydraulic remote crimping heads up to 60 tonne capacity• Light-weight, portable and small in size with high power• Audible ‘POP’ signals completion of the crimp cycle• Comes with remote control pendant• Double Acting pump available (Part No. MSS-HCP-45SV-DA)

CRIMPING PUMP -0.45KW-240V- 12V REMOTEPUMPSELECTRIC AND HYDRAULIC PUMPS

Unit: EA Qty: 1

Part No. HPP1 • This pump is called the ‘Peanut Pump’ for good reason. Small and light-weight, this pump

produces a full 700bar (10,000 psi) pressure• Sufficient oil volume to power all CABAC crimp heads and cutters• Operate at any angle - no leaks if tipped over• Motor and pump are totally enclosed and drip proof• Comes with a 3m hose and coupler to suit Cabac and MSP hyd. tools

SUPER LIGHTWEIGHT 240V ELECTRIC PUMP Unit: EA Qty: 1

Part No. HPP2 • Two stage pumping with 2.5L/min flow in low pressure stage and 0.35L/min in the high

pressure stage• For CABAC and MSS remote crimp heads (up to 60 tonnes) or cutters• Power Supply Voltage: 240V/50Hz• Weight: 18kg• Comes with a 3m hose and coupler to suit Cabac and MSP hyd. tools

HYDRAULIC PUMP/HOSE 240V LIGHTWEIGHT Unit: EA Qty: 1

• 60 ton crimp head hex die for copper crimp lugs and links• For large crimp lugs and links up 1200 sq. mm available• offers wide crimp on barrel

60T DIES

Part No. Description Unit QtyMSS-RH60-23.1AFCU HEX DIE SET - 60T -23.1MM AF - CU EA 1MSS-RH60-26.0AFCU HEX DIE SET - 60T - 26.0MM AF - CU EA 1MSS-RH60-28.1AFCU HEX DIE SET - 60T - 28.1MM AF - CU EA 1MSS-RH60-31.0AFCU HEX DIE SET - 60T - 31.0MM AF - CU EA 1MSS-RH60-37.0AFCU HEX DIE SET - 60T - 37.0MM AF - CU EA 1

DIES COPPER

10

Rugged Laser Cut Steel Trigger Guard

Spring loaded two stage trigger

Hydraulic Pole Saw™

Automatic Chain Oiler

High Strength Insulated

Fibreglass pole

Chip Deflector

The MSS range of long reach hydraulic pole saws are designed for safely trimming branches from either an aerial bucket, or from the ground. There are three standard lengths in the range providing an option for all applications.

• The industries lightest, most balanced Hydraulic Pole Saw• Dual Spool for use with either Open or Closed Centre hydraulic systems.• High Strength Insulated Fibreglass pole.• Greater internal and external support design at each end of the pole to

avoid hydraulic leakage.• Cartridge style valves for greater accuracy and more economical servicing.• “Cool running” handle design for operator comfort.• Automatic Chain Oiler.

Bar Size 13"Flow Range 4 - 8gpm

Operating Pressure 1,000 - 2,000psi

Pressure Port

9/16 - 18 Sae O Ring

Return Port

3/4 - 16 Sae O Ring

Technical DataSafety Features• All alloy components CNC machined from

solid Billet High Grade Aluminium Alloy for superior strength and reliability.

• Foam filled fiber glass pole.

• Individually Electrically Tested to International Standards. 100kv / 5 mins.

• Sprocket Guard.

• Rugged Laser Cut Steel Trigger Guard.

• Spring Loaded Two Stage Trigger.

• Chip Deflector - protecting the operator from flying chips.

ProudlyAustralian

“Cool running” handle

• Designed for safely trimming branches from either an aerial bucket or the ground• Light-weight and balanced with strong insulated fibreglass pole• Packed with safety features• Designed with a ‘Cool Running’ handle for operator comfort• Can be used on both open and closed hydraulic systems

HYDRAULIC POLE SAW

Part No. Description Unit QtyMSS-HPS-1500-FF-C POLE SAW 150CM FOAM FILLED WITH COUPLERS EA 1MSS-HPS-1800-FF-C POLE SAW 180CM FOAM FILLED WITH COUPLERS EA 1MSS-HPS-2100-FF-C POLE SAW 210CM FOAM FILLED WITH COUPLERS EA 1

HYDRAULIC POLE SAWS

11

ProudlyAustralian

Technical DataTorque output 695nm 515 ft-lbs

Optimal flow range 15 - 30lpm 4-8 gpm

Working pressure 50 - 140bar 750 - 2,000psi

Weight 2.7kg 5.95lbs

Length 198mm 7.8"

Width 80mm 3.1"

Height 226mm 8.9"

Superior quality machined from solid billet lightweight premium grade aircraft alloy for superior strength and reliability.

Internal safety relief valve. Protects against hydraulic pressure spikes.

Heat Insulated, ergonomic handle designed for use with Live Line gloves.

Hi - Lo Torque Selector

Quick Change Direction Selector

Accessories available:

DRILL BITS IMPACT SOCKETS

HOSES COUPLERS

The MSS Enforcer Hydraulic Impact Wrench is the ideal tool for drilling holes, tightening and loosening hardware on the toughest treated hardwood power poles.

Featuring a HI-LO torque selector allowing the user to easily switch between high and low torque and a dual action spool making the tool suitable for use on both open and closed centre hydraulic circuits. Exclusive cartridge style valves for greater accuracy, and more economical servicing.

Part No. MSS-IW-DT716-TG-C Impact Wrench 7/16 Chuck Guard Couplers

Part No. MSS-IW-DT12-TG-C Impact Wrench 1/2 Sq Drive Guard & Couplers

Model shown: MSS-IW-DT716-TG-CShown with safety trigger guard incorporating lifting eye and flush face couplers. (Optional Extras)

Tri-Ball 7/16 Quick Change Chuck.

Dual spool selector for open and closed hydraulic systems.

Enforcer™

NEW

PATENTPENDING

12

• The MSS Enforcer Hydraulic Impact Wrench is the ideal tool for drilling holes and tightening/loosening hardware on hardwood power poles

• Easy to use HI-LO Torque Selector• Dual action spool• Suitable for use on both open and closed centre hydraulic circuit• New and improved handle grip

IMPACT WRENCHES

Part No. Description Unit QtyMSS-IW-DT716-TG-C ENFORCER IMPACT WRENCH 7/16 INC COUPLERS EA 1MSS-IW-DT12-TG-C ENFORCER IMPACTWRENCH1/2 DRGUARD&COUPLRS EA 1

HYD IMPACT WRENCHES

HYDRAULIC HOS

Part No. Description Unit QtyMSS-NCR666610-FC INSULATING RUBBER HOSE SET-10F- COUPLERS KIT 1MSS-NCR666612-FC INSULATING RUBBER HOSE SET-12F- COUPLERS KIT 1MSS-NCR66668-FC INSULATING RUBBER HOSE SET- 8F- COUPLERS KIT 1

HYDRAULIC HOSE

• DOMINATOR III range of impact augers specifically designed with Australian conditions in mind

• Low friction coating for improved chip removal• Heavy duty self feeding screw• Flared retraction lip for easier auger removal

IMPACT AUGER BITS 205MM

Part No. Description Unit QtyMSS-0516S IMPACT AUGER - 8MM (5/16) X 205MM (8) EA 1MSS-0038S IMPACT AUGER - 10MM (3/8) X 205MM (8) EA 1MSS-0716S IMPACT AUGER - 11MM (7/16) X 205MM (8) EA 1MSS-0916S IMPACT AUGER - 14MM (9/16) X 205MM (8) EA 1MSS-0058S IMPACT AUGER - 16MM (5/8) X 205MM (8) EA 1

AUGER BITS AND ADAPTERS

Part No. MSS-0012MET • DOMINATOR III range of impact augers specifically designed with Australian conditions in

mind• Low friction coating for improved chip removal• Heavy duty self feeding screw• Flared retraction lip for easier auger removal

IMPACT AUGER - 12MM X 457MM (18) Unit: EA Qty: 1

13

• DOMINATOR III range of impact augers specifically designed with Australian conditions in mind

• Low friction coating for improved chip removal• Heavy duty self feeding screw• Flared retraction lip for easier auger removal

IMPACT AUGER BITS 457MM

Part No. Description Unit QtyMSS-0916 IMPACT AUGER - 14MM (9/16) X 457MM (18) EA 1MSS-0058 IMPACT AUGER - 16MM (5/8) X 457MM (18) EA 1MSS-1116 IMPACT AUGER - 18MM (11/16) X 457MM (18) EA 1MSS-1116S IMPACT AUGER - 18MM (11/16) X 205MM (8) EA 1MSS-0034 IMPACT AUGER - 19MM (3/4) X 457MM (18) EA 1MSS-1316 IMPACT AUGER - 21MM (13/16) X 457MM (18) EA 1MSS-0078 IMPACT AUGER - 22MM (7/8) X 457MM (18) EA 1MSS-1516 IMPACT AUGER - 24MM (15/16) X 457MM (18) EA 1MSS-1000 IMPACT AUGER - 25MM (1) X 457MM (18) EA 1MSS-1018 IMPACT AUGER - 28MM (11/8) X 457MM (18) EA 1MSS-1916 IMPACT AUGER - 40MM (19/16) X 457MM(18 EA 1

• DOMINATOR III range of impact augers specifically designed with Australian conditions in mind

• Low friction coating for improved chip removal• Heavy duty self feeding screw• Flared retraction lip for easier auger removal

IMPACT AUGER BITS 610MM

Part No. Description Unit QtyMSS-0058L IMPACT AUGER - 16MM (5/8) X 610MM (24) EA 1MSS-1116L IMPACT AUGER - 18MM (11/16) X 610MM (24) EA 1MSS-0034L IMPACT AUGER - 19MM (3/4) X 610MM (24) EA 1MSS-1316L IMPACT AUGER - 21MM (13/16) X 610MM (24) EA 1MSS-0078L IMPACT AUGER - 22MM (7/8) X 610MM (24) EA 1MSS-1516L IMPACT AUGER - 24MM (15/16) X 610MM (24) EA 1MSS-1000L IMPACT AUGER - 25MM (1) X 610MM (24) EA 1MSS-1018L IMPACT AUGER - 28MM (11/8) X 610MM (24) EA 1

• DOMINATOR III range of impact augers specifically designed with Australian conditions in mind

• Low friction coating for improved chip removal• Heavy duty self feeding screw• Flared retraction lip for easier auger removal

IMPACT AUGER BITS CARBIDE TIPPED

Part No. Description Unit QtyMSS-0038S-CT IMPACT AUGER - 10MM X 205MM - TIPPED EA 1MSS-0058S-CT IMPACT AUGER - 16MM X 205MM - TIPPED EA 1MSS-0058-CT IMPACT AUGER - 16MM X 457MM - TIPPED EA 1MSS-0034-CT IMPACT AUGER - 19MM X 457MM - TIPPED EA 1MSS-0078-CT IMPACT AUGER - 22MM X 457MM - TIPPED EA 1

14

Part No. MSS-MM71612 • Socket Adaptor for use in impact wrenches• Use with all 1/2• Fit one to each socket for quick socket change

SOCKET ADAPTOR - MALE/MALE- 7/16QC- 1/2 Unit: EA Qty: 1

• Square Drive Impact Socket Insert AdaptorIMPACT SOCKET ADAPTORS

Part No. Description Unit QtyMSS-PA14 ADAPTOR IMPACT 3/8 FEMALE X 1/2 MALE EA 1MSS-PA24 ADAPTOR - FEMALE X MALE EA 1MSS-PA42 ADAPTOR - FEMALE X MALE EA 1

• MSS range of DOMINATOR high performance power auger bits are designed for the toughest hard wood

• Suitable for use in drills with a minimum 7/16• Huge range of sizes and lengths• Not suitable for use with impact wrenches

POWER AUGER BITS 205MM

Part No. Description Unit QtyMSS-00148 POWER AUGER - 6MM 1/4 X 205MM 8 EA 1MSS-05168 POWER AUGER - 8MM 5/16 X 205MM 8 EA 1MSS-00388 POWER AUGER - 10MM 3/8 X 205MM 8 EA 1MSS-07168 POWER AUGER - 11MM 7/16 X 205MM 8 EA 1MSS-00128 POWER AUGER - 13MM 1/2 X 205MM 8 EA 1MSS-09168 POWER AUGER - 14MM 9/16 X 205MM 8 EA 1MSS-00588 POWER AUGER - 16MM 5/8 X 205MM 8 EA 1MSS-11168 POWER AUGER - 18MM 11/16 X 205MM 8 EA 1MSS-00348 POWER AUGER - 19MM 3/4 X 205MM 8 EA 1MSS-13168 POWER AUGER - 20MM 13/16 X 205MM 8 EA 1MSS-15168 POWER AUGER - 24MM 15/16 X 205MM 8 EA 1MSS-00018 POWER AUGER - 25MM 1 X 205MM 8 EA 1

15

• MSS range of DOMINATOR high performance power auger bits are designed for the toughest hard wood

• Suitable for use in drills with a minimum 7/16• Huge range of sizes and lengths• Not suitable for use with impact wrenches

POWER AUGER BITS 457MM

Part No. Description Unit QtyMSS-003818 POWER AUGER - 10MM 3/8 X 457MM 18 EA 1MSS-071618 POWER AUGER - 11MM 7/16 X 457MM 18 EA 1MSS-001218 POWER AUGER - 13MM 1/2 X 457MM 18 EA 1MSS-091618 POWER AUGER - 14MM 9/16 X 457MM 18 EA 1MSS-005818 POWER AUGER - 16MM 5/8 X 457MM 18 EA 1MSS-111618 POWER AUGER - 18MM 11/16 X 457MM 18 EA 1MSS-1011618 POWER AUGER - 27MM 11/16 X 457MM 18 EA 1MSS-003418 POWER AUGER - 19MM 3/4 X 457MM 18 EA 1MSS-131618 POWER AUGER - 20MM 13/16 X 457MM 18 EA 1MSS-007818 POWER AUGER - 22MM 7/8 X 457MM 18 EA 1MSS-1000018 POWER AUGER - 25MM 1 X 457MM 18 EA 1MSS-1001818 POWER AUGER - 29MM 11/8 X 457MM 18 EA 1MSS-1001418 POWER AUGER - 32MM 11/4 X 457MM 18 EA 1MSS-1003818 POWER AUGER - 35MM 13/8 X 457MM 18 EA 1MSS-1001218 POWER AUGER - 38MM 11/2 X 457MM 18 EA 1

Part No. MSS-FF12716-MOD • Use our Impact Augers in your 1/2• Modified with 3 ball bearings for positive lock on Auger bits

TRI BALL CHUCK - 7/16 X 0.5 Unit: EA Qty: 1

16

• Swedish made Momento long series impact sockets• Large range of sizes available

IMPACT SOCKETS

Part No. Description Unit QtyMSS-4-3-8L IMPACT SOCKET - LONG - 3/8 INCH - 1/2 SQ EA 1MSS-4-10L IMPACT SOCKET - LONG - 10MM - 1/2 SQ DR EA 1MSS-4-11L IMPACT SOCKET - LONG - 11MM - 1/2 SQ DR EA 1MSS-4-12L IMPACT SOCKET - LONG - 12MM - 1/2 SQ DR EA 1MSS-4-13L IMPACT SOCKET - LONG - 13MM - 1/2 SQ DR EA 1MSS-4-14L IMPACT SOCKET - LONG - 14MM - 1/2 SQ DR EA 1MSS-4-15L IMPACT SOCKET - LONG - 15MM - 1/2 SQ DR EA 1MSS-4-16L IMPACT SOCKET - LONG - 16MM - 1/2 SQ DR EA 1MSS-4-17L IMPACT SOCKET - LONG - 17MM - 1/2 SQ DR EA 1MSS-4-18L IMPACT SOCKET - LONG - 18MM - 1/2 SQ DR EA 1MSS-4-19L IMPACT SOCKET - LONG - 19MM - 1/2 SQ DR EA 1MSS-4-20L IMPACT SOCKET - LONG - 20MM - 1/2 SQ DR EA 1MSS-4-21L IMPACT SOCKET - LONG - 21MM - 1/2 SQ DR EA 1MSS-4-22L IMPACT SOCKET - LONG - 22MM - 1/2 SQ DR EA 1MSS-4-23L IMPACT SOCKET - LONG - 23MM - 1/2 SQ DR EA 1MSS-4-24L IMPACT SOCKET - LONG - 24MM - 1/2 SQ DR EA 1MSS-4-26L IMPACT SOCKET - LONG - 26MM - 1/2 SQ DR EA 1MSS-4-27L IMPACT SOCKET - LONG - 27MM - 1/2 SQ DR EA 1MSS-4-28L IMPACT SOCKET - LONG - 28MM - 1/2 SQ DR EA 1MSS-4-30L IMPACT SOCKET - LONG - 30MM - 1/2 SQ DR EA 1MSS-4-32L IMPACT SOCKET - LONG - 32MM - 1/2 SQ DR EA 1MSS-2-33L IMPACT SOCKET - LONG 33MM AF - SQ EA 1MSS-2-33L-PA42 IMPACT SOCKET - LONG - 33MM - 1/2 SQ DR EA 1MSS-2-34L IMPACT SOCKET - LONG 34MM AF - SQ EA 1MSS-2-34L-PA42 IMPACT SOCKET - LONG - 34MM - 1/2 SQ DR EA 1MSS-2-36L IMPACT SOCKET - LONG 36MM AF - SQ EA 1MSS-2-36L-PA42 IMPACT SOCKET - LONG - 36MM - 1/2 SQ DR EA 1MSS-2-37L IMPACT SOCKET - LONG 37MM AF - SQ EA 1MSS-2-37L-PA42 IMPACT SOCKET - LONG - 37MM - 1/2 SQ DR EA 1MSS-2-38L IMPACT SOCKET - LONG 38MM AF - SQ EA 1MSS-2-38L-PA42 IMPACT SOCKET - LONG - 38MM - 1/2 SQ DR EA 1

IMPACT SOCKETS

Part No. MSS-BODY66 • Coupler for medium pressure hydraulic systems• For use with the KompressorTM, EnforcerTM and Hydraulic Pole Saw• Male version also available (Part No. MSS-NOSE66)

FLUSH FACE COUPLING FEMALE - 3/8 BODYCOUPLERSCOUPLERS

Unit: EA Qty: 1

Part No. MSS-NOSE66 • Coupler for medium pressure hydraulic systems• For use with the KompressorTM, EnforcerTM and Hydraulic Pole Saw• Female version also available (Part No. MSS-BODY66)

FLUSH FACE COUPLER NIPPLE - 3/8 NOSE Unit: EA Qty: 1

CBMSPH

YDRA

ULIC1

0-11

In support of our policy of continuous product improvement we reserve the right to change materials and specifications without notice. Drawings, where used, are not to scale. All dimensions are in millimetres and sizes given are approximate. Where possible, technical MSDS data sheets are made available on the website. All products should be installed and used in accordance with manufacturer's instructions provided. Warning: products may be the subject of registered designs and patents. Refer to website for terms and conditions on warranty.

www.msspower.com.ausales@msspower.com.au