Andrew Concealement Solutions

CO

NC

EALM

ENT SO

LUTIO

NS

Micro AcCELLerator™ Antennas

AcCELLerator™ Antenna Concealment Solutions

Antenna Concealment Mounting Solutions

Concealment Solutions

Andrew Corporation phone 1.800.255.1479 • +1.708.873.2307 fax 1.800.349.5444 • +1.779.435.8579 www.andrew.com90

Overview

Andrew offers a wide variety of base station antenna concealment solutions including:

Micro AcCELLerator™ tri-sector antennas with fixed and variable tilt models for 1800/1900/UMTS

AcCELLerator™ antenna concealment solutions for dual and tri-sector antenna configurations

AcCELLerator antenna mounting solutions with both hardware and accessories for field installation

Micro AcCELLerator Tri-Sector Antennas Micro AcCELLerator antennas are available in two series with diameters smaller than 7.9 in (201 mm)—CSH and MMTR. The CSH series houses three wideband DualPol®, variable tilt antennas inside a single radome. These Teletilt® RET-compatible antennas have a removable lower cover for easy installation on a flat surface or monopole. Each sector is marked on the mounting base plate to ensure accurate positioning. The MMTR series houses three DualPol, RET-compatible antennas in a single radome and is available in fixed tilts of zero, two, and four degrees.

AcCELLerator Antenna Concealment SolutionsCustomized options make the AcCELLerator antenna concealment solutions ideal for applications where dual and tri-sector antenna configurations are desired. Customer-configured, factory-assembled solutions are designed for use with the FR, RR, DR, and TR series antennas and are available in diameters of 16, 19.5, 30, and 36 inch (406, 483, 762, and 914 mm). Factory assembly assures that each solution is pre-cabled and VSWR tested.

Package up to six DualPol antennas oriented at 180°, 120°, or at a customized azimuth setting inside a single enclosure

Mix and match beamwidths, electrical downtilts, and polarization options

Gain faster zoning approval—cables are not visible, mounts on unobtrusive monopoles or existing structures such as roof tops, utility poles, and billboards

Micro AcCELLerator antennas are less than 7.9 in (201 mm) in diameter

Easily access individual antennas

RET compatible

Antenna Concealment Mounting SolutionsField-assembled antenna concealment mounting solutions are available for both dual and wideband Andrew base station antennas. A variety of hardware and accessories are offered for flexible field installation (mounting kits, filler panel kits, and a universal telescoping mounting stand).

Ordering InformationSee specifications and product selection information for more details about Andrew antenna concealment solution products. Use the ordering worksheets provided to help configure your customized solution and submit it to receive a quote or place an order. Contact Andrew’s Customer Support Center (CSC) for more information.

Andrew’s commitment to providing the most innovative solutions in the industry includes ongoing product development—watch for additions to the Micro AcCELLerator series featuring antennas with integrated AISG OneBase™ tower mounted amplifiers.

Customer ConfiguredFactory Assembled AcCELLerator™ Antenna Concealment Solutions

Micro AcCELLerator™

Antennas

AcCELLerator™ AntennaMounting Solutions

Andrew Corporation phone 1.800.255.1479 • +1.708.873.2307 fax 1.800.349.5444 • +1.779.435.8579 www.andrew.com 91


Micro AcCELLerator™ Antennas CSH Series

CSH-6516A-VTMicro AcCELLerator™ Wideband DualPol® Tri-Sector Antenna

0

180

10350

170190

20340

160200

30330

150210

40320

140220

50310

130230

60300

120240

70290

110250

80280

100260

90270

Azimuth1920 MHz, 2° Tilt

0

180

10350

170190

20340

160200

30330

150210

40320

140220

50310

130230

60300

120240

70290

110250

80280

100260

90270

Base material 0.3 (8.0) thick

Ø1.7 (42.0)

20.0°

10.0°

Ø7.9 (200.0)

R 3.1 (80.0)

R1.2 (30.0)

120.0°

60.0°

1.6 (39.9) Typical

Mounting Slots Ø0.7 (17.0)Equally spaced in 3 positionson Ø 6.3 (160) Bolt Circle

R(15.0) Typical

2.4 (60.0)1.2 (30.0)

R0.6

ElectricalFrequency, MHz 1710–1880 1850–1990 1920–2180Polarization ±45° ±45° ±45°Gain, dBd (dBi) 15.0 (17.1) 15.3 (17.4) 15.5 (17.6)Azimuth BW, degrees 65 63 61Elevation BW, degrees 7.5 7.0 6.7Beam tilt, degrees 2–10 2–10 2–10USLS, dB 16 16 16Front-to-back ratio, dB 28 28 26Isolation, dB >30 >30 >30VSWR <1.5:1 <1.5:1 <1.5:1PIM3 at 2 x 20 W, dBc –150 –150 –150Max. input power, watts 200 200 200Impedance, ohms 50 50 50Lightning protection dc ground dc ground dc ground

MechanicalWeight, lb (kg) 46.5 (21.0)Dimensions—L x OD, in (mm) 78.3 x 7.9 (1,989 x 201)Max. wind area, ft² (m²) 1.4 (0.13)Max. wind load at 100 mph, lbf (N) 78.7 (350)Max. wind speed, mph (km/h) 125 (201)Hardware material Integrated flangeConnector type 7–16 DIN–female (6, bottom)Color Light gray

Base Flange DimensionsNote: Dimensions are shown in inches (mm).

FREQUENCY BAND (MHz)H = 1710–2180L = 806–960LH = 806–960 and 1710–2180

ELECTRICAL DOWNTILT (EDT) OPTIONT# = Degree of Fixed EDTVT = Variable EDTR2 = Factory Installed ATM200 Teletilt® ActuatorAll specifications are subject to change. Please see www.andrew.com for the most current information.

Elevation1920 MHz, 2° Tilt

FrequencyBand

Gainin dBd

HorizontalBeamwidth

EDTOption

ConcealmentSolution

CS H – 65 16 – VT



ElectricalPart Number MTRR75-17-000DPL MTRR75-17-222DPL MTRR75-17-444DPLFrequency, MHz 1850–1990 1850–1990 1850–1990Polarization ±45° ±45° ±45°Gain, dBd (dBi) 14.9 (17.0) 14.9 (17.0) 14.9 (17.0)Azimuth BW, degrees 75 75 75Elevation BW, degrees 6 6 6Beam tilt, degrees 0º 2º 4ºUSLS, dB 18 18 18Isolation, dB >30 >30 >30VSWR 1.35:1 maximum 1.35:1 maximum 1.35:1 maximumPower handling, watts 250 250 250Passive intermodulation –147 dBc –147 dBc –147 dBc

at 2 x 20 W (+43 dBm) at 2 x 20 W (+43 dBm) at 2 x 20 W (+43 dBm)Lightning protection dc ground dc ground dc ground

(Optional air terminal kit) (Optional air terminal kit) (Optional air terminal kit)

MechanicalWeight, lb (kg) 20 (9.1)Dimensions, L x OD, in (cm) 57 x 6.25 (144.7 x 15.9)Max. wind load at 100 mph, lbf (N) 50 (220)Max. wind speed, mph (km/h) 150 (241)Connector type 7–16 DIN–female (6, bottom)Mounting options MTG-A30-02, MTG-A30-03, MTG-A30-04, MTG-A40-00

MTRR Series Micro AcCELLerator™ DualPol® Tri-Sector Antennas

Elevation2° Tilt

0˚

30˚

60˚

90˚120˚

150˚

80˚

210˚

240˚

270˚

300˚

330˚

0 -10 -20 -30 -40

0 -10 -20 -30 -400˚

30˚

60˚

90˚120˚

150˚

180˚

210˚

240˚

270˚

300˚

330˚

Azimuth


MTRR Series DualPol®

Micro AcCELLerator™ Antenna

3.23 (82)

1.36 (35)

1.88 (48)

0.94 (24)

Ø 6.75 (171)

1.69 (43)

6 x 1.255 (32) SQ 7-16 DIN Connector

3 x 0.500 -13 UNC-2Bon 5 (127) Bolt Circle

Micro AcCELLerator™ Antennas MTRR Series

All specifications are subject to change. Please see www.andrew.com for the most current information.



LPK-2 Air Terminal

MTG-A30-XX U-Bolt Pipe Mount

MTG-A40-00 Pedestal Mount

10 (254)

Ø 6.68 (170)

3 x Ø 0.625 (16)through onØ 5 (127) Bolt Circ

Micro AcCELLerator™ Antennas MTRR Series Mounting Accessories




AcCELLerator™ Antenna Concealment Solutions Unit Sizes Unit Diameter 16 in (406 mm) 19.5 in (495 mm) 30 in (762 mm) 36 in (914 mm)Compatible 48 in (1,219 mm) 48 in (1,219 mm) 48 in (1,219 mm) 48 in (1,219 mm) Antenna Models RR45-19-02DPL4 RR45-19-02DPL4 RR45-14-00DBL2 RR45-14-00DBL2By Length RR65-17-02DPL2 RR65-17-02DPL2 RR45-14-05DBL2 RR45-14-05DBL2

RR90-16-02DPL2 RR90-16-02DPL2 RR45-19-02DPL4 RR45-19-02DPL4 RR65-12-00DBL RR65-12-00DBL RR65-12-05DBL RR65-12-05DBL RR65-12-10DBL RR65-12-10DBL RR65-17-02DPL2 RR65-17-02DPL2 RR90-11-00DBL RR90-11-00DBL RR90-11-05DBL RR90-11-05DBL RR90-16-02DPL2 RR90-16-02DPL2

54 in (1,372 mm) 54 in (1,372 mm) 54 in (1,372 mm) 54 in (1,372 mm) DR65-18-02DPL2Q DR65-18-02DPL2Q DR65-18-02DPL2Q

56 in (1,422 mm) 56 in (1,422 mm) 56 in (1,422 mm) 56 in (1,422 mm) FR65-17-00DP FR65-17-00DP FR65-17-00DP FR65-17-00DP FR65-17-02DP FR65-17-02DP FR65-17-02DP FR65-17-02DP FR65-17-04DP FR65-17-04DP FR65-17-04DP FR65-17-04DP FR90-16-00DP FR90-16-00DP FR90-16-00DP FR90-16-00DP FR90-16-02DP FR90-16-02DP FR90-16-02DP FR90-16-02DP RR65-18-00DPL2 RR65-18-00DPL2 RR65-18-00DPL2 RR65-18-00DPL2 RR65-18-02DPL2 RR65-18-02DPL2 RR65-18-02DPL2 RR65-18-02DPL2 RR65-18-04DPL2 RR65-18-04DPL2 RR65-18-04DPL2 RR65-18-04DPL2 RR65-18-VDUL2-R RR65-18-VDUL2-R RR65-18-VDUL2-R RR65-18-VDUL2-R RR90-17-02DPL2 RR90-17-02DPL2 RR90-17-02DPL2 RR90-17-02DPL2 RR90-17-VDPL2-R RR90-17-VDPL2-R RR90-17-VDPL2-R RR90-17-VDPL2-R

60 in (1,524 mm) 60 in (1,524 mm) 60 in (1,524 mm) 60 in (1,524 mm) RR33-20-VDPL4-R RR33-20-VDPL4-R RR33-20-VDPL4-R

72 in (1,829 mm) 72 in (1,829 mm) 72 in (1,829 mm) 72 in (1,829 mm) RR65-19-00DP5 DR65-19-00DPQ DR65-19-00DPQ DR65-19-00DPQ RR65-19-02DP5 DR65-19-02DPQ DR65-19-02DPQ DR65-19-02DPQ RR65-19-04DP RR65-19-00DP5 FR65-13-00DBL2 FR65-13-00DBL2 RR90-18-00DP RR65-19-02DP5 RR65-13-VDBL2-R RR65-13-VDBL2-R RR90-18-02DP RR65-19-04DP RR65-19-00DP5 RR65-19-00DP5 RR90-18-00DP RR65-19-02DP5 RR65-19-02DP5 RR90-18-02DP RR65-19-04DP RR65-19-04DP RR90-12-VDBL2-R RR90-12-VDBL2-R RR90-18-00DP RR90-18-00DP RR90-18-02DP RR90-18-02DP TR65-19-02DPQ TR65-19-02DPQ

96 in (2,438 mm) 96 in (2,438 mm) 96 in (2,438 mm) 96 in (2,438 mm) DR65-12-00DBL DR65-12-00DBL DR65-12-05DBL DR65-12-05DBL DR90-11-00DBL DR90-11-00DBL DR90-11-05DBL DR90-11-05DBL FR65-14-00DBL2 FR65-14-00DBL2 FR90-13-00DBL2 FR90-13-00DBL2 FR90-13-05DBL2 FR90-13-05DBL2

AcCELLerator™ Antenna Concealment Solutions Unit Selection

Antenna models beginning with a DR prefix are Dual DualPol® (Quad), which changes the diameter to 22 in (559 mm) when using a 19.5 in (495 mm) unit.

16 in (406 mm) AcCELLerator™

Antenna Concealment Solution

19.5 in (495 mm) AcCELLerator™








AcCELLerator™ Antenna Concealment Solutions 16 in (406 mm) Unit

Mechanical Single Stacked

Weight, lb (kg) 190 (86) 390 (177)Dimensions, L x OD, in (cm) 72 x 16 (183 x 41) 132 x 16 (335 x 41)Max. wind load at 100 mph, lbf (N) 170 (756) 312 (1,386)Max. wind speed, mph (km/h) 100 (161) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circle

57.5°

Ø15.75 (400)

6x 0.75-10 UNC-2B thread through on Ø12 (305) Bolt Circle equally spaced 60° apart

2x 0.75-10 UNC-2B thread throughon Ø12 (305) Bolt Circle

R2.75

R5.00



Antenna ConcealmentSolution



AcCELLerator™ Antenna Concealment Solutions 19.5 in (495 mm) Unit


Antenna length, in (mm) 48 (1,219) 48 (1,219)

Weight, lb (kg) 215 (98) 415 (188)Dimensions, L x OD, in (cm) 64 x 19.5 (163 x 50) 128 x 19.5 (326 x 50)Max. wind load at 100 mph, lbf (N) 173 (772) 346 (1,544)Max. wind speed, mph (km/h) 100 (161) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circle


Weight, lb (kg) 233 (106) 450 (204)Dimensions, L x OD, in (cm) 72 x 19.5 (183 x 50) 144 x 19.5 (366 x 50)Max. wind load at 100 mph, lbf (N) 195 (868) 390 (1,736)Max. wind speed, mph (km/h) 100 (161) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circle


Weight, lb (kg) 324 (147) 554 (251)Dimensions, L x OD, in (cm) 88 x 19.5 (224 x 50) 176 x 19.5 (448 x 50)Max. wind load at 100 mph, lbf (N) 238 (1,060) 476 (2,120)Max. wind speed, mph (km/h) 100 (161) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circleNote: Optional LPK-2 air terminal can be ordered separately and used with 19.5 in (495 mm) AcCELLerator antenna systems for added lightning protection.

57.5°

Ø15.75 (400)



R2.75

R5.00


19.5 in (495 mm) AcCELLerator™ Antenna Concealment Solution



AcCELLerator™ Antenna Concealment Solutions 19.5 in (495 mm) Unit

Mechanical Single, Dual DualPol® (Quad) Stacked, Dual DualPol® (Quad)


Weight, lb (kg) 215 (98) 415 (188)Dimensions, L x OD, in (cm) 72 x 22 (183 x 56) 144 x 22 (366 x 56)Max. wind load at 100 mph, lbf (N) 173 (772) 346 (1,544)Max. wind speed, mph (km/h) 100 (161) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circle


Weight, lb (kg) 324 (147) 554 (251)Dimensions, L x OD, in (cm) 88 x 22 (224 x 56) 176 x 22 (448 x 56)Max. wind load at 100 mph, lbf (N) 238 (1,060) 476 (2,120)Max. wind speed, mph (km/h) 100 (161) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circle

19.5 in (495 mm) AcCELLerator™ Antenna Concealment Solution

57.5°

Ø15.75 (400)



R2.75

R5.00





Weight, lb (kg) 265 (120) 530 (240)Dimensions, L x OD, in (cm) 76 x 30 (193 x 76.2) 152 x 30 (386 x 76.2)Max. wind load at 100 mph, lbf (N) 317 (1,408) 634 (2,816)Max. wind speed, mph (km/h) 100 (161) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circle

57.5°

Ø15.75 (400)



R2.75

R5.00








Mechanical Single

Weight, lb (kg) 425 (193)Dimensions, L x OD, in (cm) 116 x 36 (295 x 91)Max. wind load at 100 mph, lbf (N) 580 (2,582)Max. wind speed, mph (km/h) 100 (161)Mounting interface 6 each 0.75–10 bolts on 12 inch bolt circle

57.5°

Ø15.75 (400)



R2.75

R5.00






MechanicalCanister diameter, in (mm) 16 (406) 19.75 (502)

Weight, lb (kg) 100 (45) 148 (66.5)Dimensions, L x OD, in (mm) 24 x 16 (610 x 406) 24 x 19.75 (610 x 502)Max. wind load at 100 mph, lbf (N) 55 (245) 67 (298)Max. wind speed, mph (km/h) 100 (161) 100 (161)Antenna system compatibility, in (mm) 16 or 19 (406 or 483) 19 or 30 (483 or 762)Note: Mounting canisters are for use in housing TMAs and/or customer interfaces and cannot be used with stacked AcCELLerator™

antenna systems.

6 x 0.75–10 UNC

2 x 45°

Ø12.0 ( 305) Bolt CircleØ10.0 (254)

Ø12 (305) Bolt Circle

4 x Ø 0.875 (22) through

2 x Ø 0.563 (14) through

LNAC-X-X-X16 in (406 mm) AcCELLerator™

Mounting Canister

Canister Base Interface DimensionsNote: Dimensions are shown in inches (mm).

Canister Top View Interface DimensionsNote: Dimensions are shown in inches (mm).

AcCELLerator™ Antenna Concealment Solutions LNAC-X-X-X Mounting Canisters



AcCELLerator™ Antenna Concealment Solutions MTG-A00-02 AcCELLeratorTM Mounting Flange

MTG-A00-02 AcCELLerator™ Mounting Flange16 in (406 mm) galvanized steel mounting plate, 0.5 in (12.7 mm) thick with mating hole pattern for use with AcCELLerator™ antenna concealment solution units. Use this mounting flange to make your own custom mount or monopole adapter.

Base material 0.5 in (12.7 mm) thick

4 x 45°

4 x 90°

Ø16 (406)

Ø4.53 (115)

Ø12 (305)




Integrate TMA Housing

Yes

No

AcCELLerator™ Antenna Concealment Solutions Ordering Worksheet

Please complete the configuration worksheet shown below and fax it to Andrew’s Customer Support Center:From North America send to 1-800-349-5444 or from outside North America send to +1-779-435-8579. You will receive a written quotation containing pricing and lead time. If you have any questions about this process, please contact Andrew’s Customer Support Center: From North America call 1-800-255-1479 or from outside North America call +1-708-873-2307, or contact your local Andrew Sales Office.

Company: ________________________________________________________________ Date: ________________________________

Contact: _____________________________________________ Email: ___________________________________________________

Phone: ______________________________________________ Fax: ____________________________________________________

Antenna Models (Lower)

Sector 1:

Sector 2:

Sector 3:

Unit Type

16 inch

19.5 inch

30 inch

36 inch

Antenna Models (Upper, If Stacked)Note: Not available for 36 inch Cellular systems.

Sector 1:

Sector 2:

Sector 3:

Antenna Azimuth Mounting Angle (Lower)

Sector 1:

Sector 2:

Sector 3:

Antenna Azimuth Mounting Angle (Upper, If Stacked)

Sector 1:

Sector 2:

Sector 3:

Module Required

Lower

Upper

(If Stacked)

RF Connector(s) at Output

Standard: 7–16 DIN – female, straight

Optional: 7–16 DIN – male, straight

Type N – female, straight

Type N – male, straight

Other (Specify)

LowerUpper

(If Stacked)

Frequency Range:

Cellular (Available for 30 and 36 inch units)PCS (Available for 16, 19, 30, and 36 inch units)

Cable Extension Below Lower Module

Standard: 8–12 inch

(Varies by model)

Custom:

Lower inch

Upper inch

Housing only

Housing and TMA

mounting plates only

Housing, integrated TMAs, and jumper cables

TMA Manufacturer:

TMA Model:



Antenna Concealment Mounting Solutions Hardware Selection

Please see www.andrew.com for the most current information.

Andrew Corporation offers two unique mounting solutions for antenna concealment applications. AcCELLerator™ and Microsite™

concealment mounting products allow up to three Andrew panel base station antennas to be installed onto a single mast in a tree configuration.

AcCELLerator™ Antenna Concealment Mounting SolutionsThe AcCELLerator product family features a universal telescoping mounting stand that adjusts in increments of 6 inches ranging from 75.3 to 135 in (1,913 to 3,429 mm). Mounting kits available for use with the AcCELLerator universal mounting stand are compatible with most Andrew base station antennas.

Antenna No. of Qty Per Universal Qty PerAntenna Model Type Ports Mounting Kit Configuration Mounting Stand ConfigurationADFD1820-6565C-XDM Quad 4 800TREEKIT 1 per antenna DB800TREE 1ADFD1820-65C-R2DM Quad 4 800TREEKIT 1 per antenna DB800TREE 1ADFD182A-6565B-XDM Quad 4 800TREEKIT 1 per antenna DB800TREE 1ADFD182A-65B-R2DM Quad 4 800TREEKIT 1 per antenna DB800TREE 1ADFDP182-6565B-XDM Quad 4 800TREEKIT 1 per antenna DB800TREE 1ADFDP182-65B-R2DM Quad 4 800TREEKIT 1 per antenna DB800TREE 1CTSDG-06513-XDM/R2DM Wide Band 2 800TREEKIT 1 per antenna DB800TREE 1CTSDG-06515-XDM/R2DM Wide Band 2 800TREEKIT 1 per antenna DB800TREE 1CTSDG-06516-XDM/R2DM Wide Band 2 800TREEKIT 1 per antenna DB800TREE 1DBXGKC-6565A-VTM Dual Band 2 800TREEKIT 1 per antenna DB800TREE 1DBXGKC-6565B-VTM Dual Band 2 800TREEKIT 1 per antenna DB800TREE 1DBXGKC-6565C-VTM Dual Band 2 800TREEKIT 1 per antenna DB800TREE 1DBXLH-6565A-VTM/R2M Dual Band 4 800TREEKIT 1 per antenna DB800TREE 1DBXLH-6565B-VTM/R2M Dual Band 4 800TREEKIT 1 per antenna DB800TREE 1DBXLH-6565C-VTM/R2M Dual Band 4 800TREEKIT 1 per antenna DB800TREE 1DBXTH-6565A-VTM/R2M Dual Band 4 800TREEKIT 1 per antenna DB800TREE 1DBXTH-6565B-VTM/R2M Dual Band 4 800TREEKIT 1 per antenna DB800TREE 1DBXTH-6565C-VTM/R2M Dual Band 4 800TREEKIT 1 per antenna DB800TREE 1TBXLHA-6565C-VTM/R2M Tri Band 6 800TREEKIT 1 per antenna DB800TREE 1UMWD-03319-XDM/R2DM Wide Band 2 800TREEKIT 1 per antenna DB800TREE 1UMWD-04517-XDM/R2DM Wide Band 2 800TREEKIT 1 per antenna DB800TREE 1UMWD-04519-XDM/R2DM Wide Band 2 800TREEKIT 1 per antenna DB800TREE 1UMWD-06513-XDH/R2DH Wide Band 2 UMWD-TREEKIT 1* DB800TREE 1UMWD-06516A-XDH/R2DH Wide Band 2 UMWD-TREEKIT 1* DB800TREE 1UMWD-06517-XDH/R2DH Wide Band 2 UMWD-TREEKIT 1* DB800TREE 1UMWD-09014B-XDH/R2DH Wide Band 2 UMWD-TREEKIT 1* DB800TREE 1UMWD-09016-XDH/R2DH Wide Band 2 UMWD-TREEKIT 1* DB800TREE 1UMWDP-06516-XDH/R2DH Wide Band 2 UMWD-TREEKIT 1* DB800TREE 1*One kit provides mounting for three antennas.

Microsite™ Antenna Concealment Mounting SolutionsThe Microsite product family is designed for use with any customer-supplied mounting pole measuring 3.5 in (88.9 mm) OD and is compatible for use with the AcCELLerator universal mounting stand. Mounting panels are included with the Microsite mounting kits that allow the gaps between the antennas to be filled offering enhanced wind loading performance.

Qty Per MountingAntenna Model Mounting Kit Configuration Stand/Pole*UMWD-06513-XDH/R2DH 602313-1 1 3.5 in (88.9 mm) ODUMWD-06516A-XDH/R2DH 602313-5 1 3.5 in (88.9 mm) ODUMWD-06517-XDH/R2DH 602313-3 1 3.5 in (88.9 mm) ODUMWD-09014B-XDH/R2DH 602313-5 1 3.5 in (88.9 mm) ODUMWD-09016-XDH/R2DH 602313-3 1 3.5 in (88.9 mm) ODUMWDP-06516-XDH/R2DH 602313-2 1 3.5 in (88.9 mm) OD*Customer supplied or used with universal mounting stand DB800TREE.

AcCELLerator™

Antenna Mounting Solutions with Universal Mounting Stand

Microsite™ Antenna Mounting Solutions with Filler Panels



Antenna Concealment Mounting Solutions Mechanical Specifications

DB800TREE Stand Base Flange DimensionsNote: Dimensions are shown in inches (mm).

Microsite™ Antenna Concealment Mounting Solution LengthsPart Number Length of Fillers602313-1 30.53 in (775.4 mm)602313-2 54.5 in (1,384.4 mm)602313-3 80.59 in (2,047.1 mm)602313-5 51.38 in (1,305 mm)

12 x 30°

3 x 1.26 (32)3 x 0.63 (16) Ø4.02 (102) ± 1.5

3 x R3.5 (89) ± 1.5

12 x R0.51 (13)

Ø18 (457) ± 1.5

3 x R7.2 (183) ± 1.512.5°

3 x 120°

12 x 5°

R0.35 (8.9)

3 x 120°

B

C

A

Ø16 (406) Bolt Circle

AcCELLerator™ Antenna Concealment Mounting Solution Mechanical Specifications Antenna Models CTSDG-06513-XDM/R2DM ADFD1820-6565C-XDM UMWD-06513-XDH/R2DH

CTSDG-06515-XDM/R2DM ADFD182A-6565B-XDM UMWD-06516A-XDH/R2DHCTSDG-06516-XDM/R2DM ADFDP182-6565B-XDM UMWD-06517-XDH/R2DHDBXGKC-6565A-VTM ADFD1820-65C-R2DM UMWD-09014B-XDH/R2DHDBXGKC-6565B-VTM ADFD182A-65B-R2DM UMWD-09016-XDH/R2DHDBXGKC-6565C-VTM ADFDP182-65B-R2DM UMWDP-06516-XDH/R2DHDBXLH-6565A-VTM/R2MDBXLH-6565B-VTM/R2MDBXLH-6565C-VTM/R2MDBXTH-6565A-VTM/R2MDBXTH-6565B-VTM/R2MDBXTH-6565C-VTM/R2MUMWD-03319-XDM/R2DMUMWD-04517-XDM/R2DMUMWD-04519-XDM/R2DMTBXLHA-6565C-VTM/R2MUMWD-03319-XDM/R2DMUMWD-04517-XDM/R2DMUMWD-04519-XDM/R2DM

Universal Tree Stand DB800TREE Weight (stand only) 132 lb (59.8 kg) Height (stand) Fully Retracted 75.3 in (1,913 mm) Fully Extended 135 in (3,429 mm) Diameter (stand only) Top 3.5 in (88.9 mm) Bottom 4 in (101.6 mm) Mounting Hardware 800TREEKIT UMWD-TREEKIT Outer Diameter (w/antennas) 20 in (508 mm) 16.1 in (409 mm) 13.25 in (337 mm)Note: The telescoping stand adjusts in increments of 6 in (152.4 mm).

Base material 0.75 in (19 mm) thick



Antenna Concealment Mounting Solutions Ordering Worksheet

Notes:1. The universal stand and mounting kits are designed for Andrew antennas.

2. See ordering information to select the type of mounting kits and quantities needed for your antennas and the concealment solution you have chosen.

3. A customer-supplied 3.5 in (88.9 mm) pole/stand may be used with the Microsite mounting kits.

4. Contact Andrew's Customer Support Center for additional information on concealment products.

Please complete the configuration worksheet shown below and fax it to Andrew’s Customer Support Center:From North America send to 1-800-349-5444 or from outside North America send to +1-779-435-8579. You will receive a written quotation containing pricing and lead time. If you have any questions about this process, please contact Andrew’s Customer Support Center: From North America call 1-800-255-1479 or from outside North America call +1-708-873-2307, or contact your local Andrew Sales Office.

Company: ________________________________________________________________ Date: ________________________________

Contact: _____________________________________________ Email: ___________________________________________________

Phone: ______________________________________________ Fax: ____________________________________________________

Antenna Models

––––––––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––––––––

Optional Stand

DB800TREE QTY: 1

Mounting Kits

602313-1 QTY: 1

602313-2 QTY: 1

602313-3 QTY: 1

602313-5 QTY: 1

Antenna Models

––––––––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––––––––

Stand

DB800TREE QTY: 1

Mounting Kits

800TREEKIT QTY:

UMWD-TREEKIT QTY: 1

Sector 1

Sector 2

Sector 3

Sector 1

Sector 2

Sector 3

AcCELLerator™ Solution

Microsite™ Solution

Andrew Concealement Solutions

Documents

Transcript of Andrew Concealement Solutions