Andrew 932lg65vte b

download Andrew 932lg65vte b

of 5

Transcript of Andrew 932lg65vte b

  • 8/10/2019 Andrew 932lg65vte b

    1/5

    932LG65VTE932LG65VTE--BBAndrew Directed Dipole Teletilt Antenna, 17102170 MHz, 65 horizontalbeamwidth, RET compatible

    l

    Unique Directed Dipole design provides exceptional azimuth pattern roll-off and strongfront-to-back ratio

    l Enhanced control of out-of-sector power improves co-channel interference, reduces

    softer hand-offs, improves capacity

    Electrical Specifications

    Frequency Band, MHz 17101880 18501990 19202170

    Gain, dBi 17.1 17.5 17.0

    Beamwidth, Horizontal, degrees 65 65 68

    Beamwidth, Vertical, degrees 7.3 6.8 6.3

    Beam Tilt, degrees 08 08 08

    USLS, typical, dB 17 18 18

    Front-to-Back Ratio at 180, dB 35 35 35

    Isolation, dB 30 30 30

    VSWR | Return Loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0

    PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150

    Input Power per Port, maximum, watts 250 250 250

    Polarization 45 45 45

    Impedance 50 ohm 50 ohm 50 ohm

    General Specifications

    Antenna Brand Andrew

    Antenna Type DualPol Directed DipoleBand Single band

    Brand Directed Dipole | DualPol | Teletilt

    Operating Frequency Band 1710 2170 MHz

    Mechanical Specifications

    Color Light gray

    Lightning Protection dc Ground

    Radiat or Materi al Aluminum

    Radome Material Fiberglass, UV resistant

    RF Connector Interface 7-16 DIN Female

    RF Connector Location BottomRF Connector Quantity, total 2

    Wind Area, maximum 0.1 m | 1.0 ft

    Wind Loading, maximum 246.0 N @ 150 km/h55.3 lbf @ 150 km/h

    Wind Speed, maximum 201.0 km/h | 124.9 mph

    Dimensions

    Depth 172.0 mm | 6.8 in

    Product SpecificationsProduct Specifications

    2014 CommScope, Inc. All r ights reserved. All trademarks identi fied by2014 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 1, 2014All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 1, 2014

    page 1 of 5page 1 of 5December 3, 2014December 3, 2014

  • 8/10/2019 Andrew 932lg65vte b

    2/5

    Length 1312.0 mm | 51.7 in

    Width 209.0 mm | 8.2 in

    Net Weight 9.1 kg | 20.1 lb

    Remote Electrical Tilt (RET) Information

    Model with Factory Installed AISG 1.1 Actuator 932LG65R2E-B

    Model with Factory Installed AISG 2.0 Actuator 932LG65A1E-B

    RET System Teletilt

    Regulatory Compliance/Certifications

    Agency Classification

    RoHS 2011/65/EU Compliant by Exemption

    China RoHS SJ/T 11364-2006 Above Maximum Concentration Value (MCV)

    ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

    Included Products

    DB390 Pipe Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Use for narrow panel antennas. Includes

    two pipe mounts.

    DB5098 Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members

    Product SpecificationsProduct Specifications932LG65VTE932LG65VTE --BB

    2014 CommScope, Inc. All r ights reserved. All trademarks identi fied by2014 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 1, 2014All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 1, 2014

    page 2 of 5page 2 of 5December 3, 2014December 3, 2014

  • 8/10/2019 Andrew 932lg65vte b

    3/5

    Horizontal Pattern Vertical Pattern

    Product SpecificationsProduct Specifications932LG65VTE932LG65VTE --BB

    2014 CommScope, Inc. All r ights reserved. All trademarks identi fied by2014 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 1, 2014All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 1, 2014

    page 3 of 5page 3 of 5December 3, 2014December 3, 2014

  • 8/10/2019 Andrew 932lg65vte b

    4/5

    DB390DB390Pipe Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Use for narrowpanel antennas. Includes two pipe mounts.

    General Specifications

    Antenna Brand Andrew

    Mount Type Pipe mounts

    Application Outdoor

    Includes Brackets | Hardware

    Package Quantity 2

    Mechanical Specifications

    Color Silver

    Material Type Galvanized steel

    Dimensions

    Compatible Diameter, maximum 114.3 mm | 4.5 in

    Compatible Diameter, minimum 61.0 mm | 2.4 in

    Net Weight 2.0 kg | 4.4 lb

    Regulatory Compliance/Certifications

    Agency Classification

    RoHS 2011/65/EU Compliant

    China RoHS SJ/T 11364-2006 Below Maximum Concentration Value (MCV)

    ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

    Product SpecificationsProduct Specifications

    2014 CommScope, Inc. All r ights reserved. All trademarks identi fied by2014 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 9, 2014All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 9, 2014

    page 4 of 5page 4 of 5December 3, 2014December 3, 2014

  • 8/10/2019 Andrew 932lg65vte b

    5/5

    DB5098DB5098Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members

    General Specifications

    Antenna Brand Andrew

    Mount Type Downtilt mounts

    Application Outdoor

    Includes Brackets | Hardware

    Package Quantity 1

    Mechanical Specifications

    Color Silver

    Material Type Galvanized steel

    Dimensions

    Compatible Diameter, maximum 114.3 mm | 4.5 in

    Compatible Diameter, minimum 61.0 mm | 2.4 in

    Net Weight 0.7 kg | 1.4 lb

    Regulatory Compliance/Certifications

    Agency Classification

    RoHS 2011/65/EU Compliant

    China RoHS SJ/T 11364-2006 Below Maximum Concentration Value (MCV)

    ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

    Product SpecificationsProduct Specifications

    2014 CommScope, Inc. All r ights reserved. All trademarks identi fied by2014 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 9, 2014All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: October 9, 2014

    page 5 of 5page 5 of 5December 3, 2014December 3, 2014