Ampco’s ZC and RC Series pumps for Marine and Industrial ...Ampco’s ZC and RC Series pumps for...
2
Ampco’s ZC and RC Series pumps for Marine and Industrial use are now available with IEC motors For over 50 years, Ampco’s ZC Series pumps have been on the market and have developed a good market share for saltwater, as well as brackish water, wastewater and pollu- tion control applications. Ampco has expanded our marine and industrial line to include the RC Series with similar success. Until recently, these pumps were available only mounted to American-style NEMA motors. This changes with our recent introduction of the ZCM and RCM Series of pumps. These pumps can be mounted to IEC B35 motors and will also have the CE marking for the European market. Features of the ZCM series: • Approved design and castings for over 50 years • Capacities up to more than 600 m³/h, heads up to 115 m • Heavy wall cast constructions with tight manufacturing tolerances • Dynamically balanced impellers • Close coupled design to IEC motor. Frame mounted execution available • Every pump will be factory tested, even if sold without motor • Very short delivery times • Type 21 mechanical seal in different options Features of the RCM series: • Approved design and castings for almost 10 years • Capacities up to 100 m³/h, heads up to 115 m • Heavy wall cast constructions with tight manufacturing tolerances • Dynamically balanced impellers • Close coupled design to IEC motor. Frame mounted execution available • Every pump will be factory tested, even if sold without motor • Very short delivery times • Type 21 mechanical seal in different options
Transcript of Ampco’s ZC and RC Series pumps for Marine and Industrial ...Ampco’s ZC and RC Series pumps for...
Ampco’s ZC and RC Series pumps for Marine and Industrial use are now available with IEC motorsFor over 50 years, Ampco’s ZC Series pumps have been on the market and have developed a good market share for saltwater, as well as brackish water, wastewater and pollu-tion control applications. Ampco has expanded our marine and industrial line to include the RC Series with similar success. Until recently, these pumps were available only mounted to American-style NEMA motors. This changes with our recent introduction of the ZCM and RCM Series of pumps. These pumps can be mounted to IEC B35 motors and will also have the CE marking for the European market.
Features of the ZCM series:
• Approved design and castings for over 50 years• Capacities up to more than 600 m³/h, heads up to 115 m• Heavy wall cast constructions with tight manufacturing
tolerances• Dynamically balanced impellers• Close coupled design to IEC motor. Frame mounted
execution available• Every pump will be factory tested, even if sold without
motor• Very short delivery times• Type 21 mechanical seal in different options
Features of the RCM series:•Approved design and castings for almost 10 years•Capacities up to 100 m³/h, heads up to 115 m •Heavy wall cast constructions with tight manufacturing
tolerances• Dynamically balanced impellers• Close coupled design to IEC motor. Frame mounted
execution available• Every pump will be factory tested, even if sold without
motor• Very short delivery times• Type 21 mechanical seal in different options
Ampco’s ZC and RC Series pumps for Marine and Industrial use are now available with IEC motorsFor over 50 years, Ampco’s ZC Series pumps have been on the market and have developed a good market share for saltwater, as well as brackish water, wastewater and pollu-tion control applications. Ampco has expanded our marine and industrial line to include the RC Series with similar success. Until recently, these pumps were available only mounted to American-style NEMA motors. This changes with our recent introduction of the ZCM and RCM Series with our recent introduction of the ZCM and RCM Series of pumps. These pumps can be mounted to IEC B35 motors of pumps. These pumps can be mounted to IEC B35 motors and will also have the CE marking for the European market.and will also have the CE marking for the European market.
Features of the RCM series:Approved design and castings for almost 10 yearsCapacities up to 100 m³/h, heads up to 115 m Heavy wall cast constructions with tight manufacturing
Ampco Pumps Company Corporate Headquarters2045 W. Mill Road Glendale, WI 53209 / USA
Tel. +49 7276 5058515 [email protected] www.ampcopumps.de
Tel. +1 (414) 643-1852 [email protected] www.ampcopumps.com
Ampco Pumps Company International OfficeAm Gaxwald 676863 Herxheim Germany
03.2
010
· fo
rm-u
nd-m
arke
.de
Water is covering almost 71% of the earth’s surface. Unfortunately, it is not in the form of clean drinking water that is essential to humans and all other life forms.
With a wide material selection from nickel aluminum bronze (CDA958), 316 stainless steel and Duplex 2205 we are mainly focused on seawater applications on board of ships or in desalination plants. For the on board applications we have the ABS (American Bureau of Shipping) type approval.
For technical information, please visit Ampco’s homepage or contact the responsible sales manager for pricing or further information.
An Ampco ZCM pump is used to boost pressure on one of thousands of desalination RO systems for the U. S. Army over the last 40 years.
Ampco’s RCM self-priming pump serves as the raw water supply pump to a Highland Engineering Inc’s 1500 ROWPU system
ZCM/RCM Type 21 seal
